diff options
Diffstat (limited to 'config/pe')
| -rw-r--r-- | config/pe/ClosedLoopControlName.drl | 1227 | ||||
| -rw-r--r-- | config/pe/push-policies.sh | 217 |
2 files changed, 1376 insertions, 68 deletions
diff --git a/config/pe/ClosedLoopControlName.drl b/config/pe/ClosedLoopControlName.drl new file mode 100644 index 00000000..c1af5cb1 --- /dev/null +++ b/config/pe/ClosedLoopControlName.drl @@ -0,0 +1,1227 @@ +/*- + * ============LICENSE_START======================================================= + * ONAP + * ================================================================================ + * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. + * ================================================================================ + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * ============LICENSE_END========================================================= + */ + +package org.onap.policy.controlloop; + +import org.onap.policy.controlloop.VirtualControlLoopEvent; +import org.onap.policy.controlloop.VirtualControlLoopNotification; +import org.onap.policy.controlloop.ControlLoopEventStatus; +import org.onap.policy.controlloop.ControlLoopNotificationType; +import org.onap.policy.controlloop.ControlLoopLogger; +import org.onap.policy.controlloop.policy.PolicyResult; +import org.onap.policy.controlloop.policy.ControlLoopPolicy; +import org.onap.policy.controlloop.policy.Policy; +import org.onap.policy.controlloop.eventmanager.ControlLoopEventManager; +import org.onap.policy.controlloop.eventmanager.ControlLoopEventManager.NEW_EVENT_STATUS; +import org.onap.policy.controlloop.eventmanager.ControlLoopOperationManager; +import org.onap.policy.controlloop.actor.so.SOActorServiceProvider; +import org.onap.policy.appc.Request; +import org.onap.policy.appc.Response; +import org.onap.policy.appc.CommonHeader; +import org.onap.policy.appclcm.LCMRequestWrapper; +import org.onap.policy.appclcm.LCMResponseWrapper; +import org.onap.policy.appclcm.LCMRequest; +import org.onap.policy.appclcm.LCMResponse; +import org.onap.policy.appclcm.LCMCommonHeader; +import org.onap.policy.vfc.VFCRequest; +import org.onap.policy.vfc.VFCResponse; +import org.onap.policy.vfc.VFCManager; +import org.onap.policy.so.SOManager; +import org.onap.policy.so.SORequest; +import org.onap.policy.so.SORequestStatus; +import org.onap.policy.so.SORequestDetails; +import org.onap.policy.so.SOModelInfo; +import org.onap.policy.so.SOCloudConfiguration; +import org.onap.policy.so.SORequestInfo; +import org.onap.policy.so.SORequestParameters; +import org.onap.policy.so.SORelatedInstanceListElement; +import org.onap.policy.so.SORelatedInstance; +import org.onap.policy.so.SOResponse; +import org.onap.policy.guard.PolicyGuard; +import org.onap.policy.guard.PolicyGuard.LockResult; +import org.onap.policy.guard.TargetLock; +import org.onap.policy.guard.GuardResult; +import org.onap.policy.guard.PolicyGuardRequest; +import org.onap.policy.guard.PolicyGuardResponse; +import org.onap.policy.guard.PolicyGuardXacmlRequestAttributes; +import org.onap.policy.guard.PolicyGuardXacmlHelper; + +import org.yaml.snakeyaml.Yaml; +import org.yaml.snakeyaml.constructor.Constructor; + +import org.slf4j.LoggerFactory; +import org.slf4j.Logger; + +import java.time.Instant; +import java.util.LinkedList; +import java.util.Iterator; + +import org.onap.policy.drools.system.PolicyEngine; + +declare Params + closedLoopControlName : String + controlLoopYaml : String +end + + +declare OperationTimer + closedLoopControlName : String + requestID : String + delay : String +end + +declare ControlLoopTimer + closedLoopControlName : String + requestID : String + delay : String +end + +/* +* +* Called once and only once to insert the parameters into working memory for this Closed Loop policy. +* +*/ +rule "${policyName}.SETUP" + when + then + + Params params = new Params(); + params.setClosedLoopControlName("${closedLoopControlName}"); + params.setControlLoopYaml("${controlLoopYaml}"); + insert(params); + + // Note: globals have bad behavior when persistence is used, + // hence explicitly getting the logger vs using a global + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {} : YAML=[{}]", params.getClosedLoopControlName(), drools.getRule().getName(), params.getControlLoopYaml()); + + String sqlDbUsername = PolicyEngine.manager.getEnvironmentProperty("sql.db.username"); + String sqlDbPassword = PolicyEngine.manager.getEnvironmentProperty("sql.db.password"); + + String aaiUrl = PolicyEngine.manager.getEnvironmentProperty("aai.url"); + String aaiUsername = PolicyEngine.manager.getEnvironmentProperty("aai.username"); + String aaiPassword = PolicyEngine.manager.getEnvironmentProperty("aai.password"); + + String soUrl =PolicyEngine.manager.getEnvironmentProperty("so.url"); + String soUsername = PolicyEngine.manager.getEnvironmentProperty("so.username"); + String soPassword = PolicyEngine.manager.getEnvironmentProperty("so.password"); + + String vfcUrl =PolicyEngine.manager.getEnvironmentProperty("vfc.url"); + String vfcUsername = PolicyEngine.manager.getEnvironmentProperty("vfc.username"); + String vfcPassword = PolicyEngine.manager.getEnvironmentProperty("vfc.password"); + + String guardUrl = PolicyEngine.manager.getEnvironmentProperty("guard.url"); + String guardUsername = PolicyEngine.manager.getEnvironmentProperty("guard.username"); + String guardPassword = PolicyEngine.manager.getEnvironmentProperty("guard.password"); + String guardJdbcUrl = PolicyEngine.manager.getEnvironmentProperty("guard.jdbc.url"); + + logger.info("{}: {} : AAI=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), aaiUrl, aaiUsername); + logger.info("{}: {} : SO=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), soUrl, soUsername); + logger.info("{}: {} : VFC=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), vfcUrl, vfcUsername); + logger.info("{}: {} : GUARD=[{}:{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), guardUrl, guardUsername, guardJdbcUrl); + logger.info("{}: {} : DB=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), sqlDbUsername, sqlDbPassword); +end + +/* +* +* This rule responds to DCAE Events where there is no manager yet. Either it is +* the first ONSET, or a subsequent badly formed Event (i.e. Syntax error, or is-closed-loop-disabled) +* +*/ +rule "${policyName}.EVENT" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + not ( ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + + try { + + // + // Check the event, because we need it to not be null when + // we create the ControlLoopEventManager. The ControlLoopEventManager + // will do extra syntax checking as well check if the closed loop is disabled. + // + if ($event.requestID == null) { + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.notification = ControlLoopNotificationType.REJECTED; + notification.from = "policy"; + notification.message = "Missing requestID"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + + // + // Retract it from memory + // + retract($event); + } else { + // + // Create an EventManager + // + ControlLoopEventManager manager = new ControlLoopEventManager($params.getClosedLoopControlName(), $event.requestID); + // + // Determine if EventManager can actively process the event (i.e. syntax, is_closed_loop_disabled checks etc.) + // + VirtualControlLoopNotification notification = manager.activate($params.getControlLoopYaml(), $event); + notification.from = "pdp-0001-controller=controlloop"; // Engine.getInstanceName() + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + // + // Are we actively pursuing this event? + // + if (notification.notification == ControlLoopNotificationType.ACTIVE) { + // + // Insert Event Manager into memory, this will now kick off processing. + // + insert(manager); + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Setup the Overall Control Loop timer + // + ControlLoopTimer clTimer = new ControlLoopTimer(); + clTimer.setClosedLoopControlName($event.closedLoopControlName); + clTimer.setRequestID($event.requestID.toString()); + clTimer.setDelay(manager.getControlLoopTimeout(1500) + "s"); + // + // Insert it + // + insert(clTimer); + } else { + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Retract it from memory + // + retract($event); + } + + // + // Now that the manager is inserted into Drools working memory, we'll wait for + // another rule to fire in order to continue processing. This way we can also + // then screen for additional ONSET and ABATED events for this RequestID. + // + } + } catch (Exception e) { + logger.warn("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName(), e); + + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.notification = ControlLoopNotificationType.REJECTED; + notification.message = "Exception occurred " + e.getMessage(); + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + // + // + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Retract the event + // + retract($event); + } +end + +/* +* +* This rule happens when we got a valid ONSET, closed loop is enabled and an Event Manager +* is now created. We can start processing the yaml specification via the Event Manager. +* +*/ +rule "${policyName}.EVENT.MANAGER" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $clTimer : ControlLoopTimer ( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} clTimer={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $clTimer); + // + // Check which event this is. + // + ControlLoopEventManager.NEW_EVENT_STATUS eventStatus = $manager.onNewEvent($event); + + // + // Check what kind of event this is + // + if (eventStatus == NEW_EVENT_STATUS.SUBSEQUENT_ONSET) { + // + // We don't care about subsequent onsets + // + logger.info("{}: {}: subsequent onset", + $params.getClosedLoopControlName(), drools.getRule().getName()); + retract($event); + return; + } + if (eventStatus == NEW_EVENT_STATUS.SYNTAX_ERROR) { + // + // Ignore any bad syntax events + // + logger.warn("{}: {}: syntax error", + $params.getClosedLoopControlName(), drools.getRule().getName()); + retract($event); + return; + } + // + // We only want the initial ONSET event in memory, + // all the other events need to be retracted to support + // cleanup and avoid the other rules being fired for this event. + // + if (eventStatus != NEW_EVENT_STATUS.FIRST_ONSET) { + logger.warn("{}: {}: no first onset", + $params.getClosedLoopControlName(), drools.getRule().getName()); + retract($event); + } + + logger.debug("{}: {}: target={}", $params.getClosedLoopControlName(), + drools.getRule().getName(), $event.target); + // + // Now start seeing if we need to process this event + // + try { + // + // Check if this is a Final Event + // + VirtualControlLoopNotification notification = $manager.isControlLoopFinal(); + + + if (notification != null) { + // + // Its final, but are we waiting for abatement? + // + if ($manager.getNumAbatements() > 0) { + logger.info("{}: {}: abatement received for {}. Closing the control loop", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event.requestID); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + // + // In this case, we are done + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Unlock the target + // + TargetLock lock = $manager.unlockCurrentOperation(); + if (lock != null) { + logger.debug("{}: {}: retracting lock=", $params.getClosedLoopControlName(), + drools.getRule().getName(), lock); + retract(lock); + } + // + // Retract everything from memory + // + logger.info("{}: {}: retracting onset, manager, and timer", + $params.getClosedLoopControlName(), drools.getRule().getName()); + + retract($manager.getOnsetEvent()); + retract($manager); + retract($clTimer); + // + // TODO - what if we get subsequent Events for this RequestID? + // By default, it will all start over again. May be confusing for Ruby. + // Or, we could track this and then subsequently ignore the events + // + } else { + // + // Check whether we need to wait for abatement + // + if ($manager.getProcessor().getControlLoop().getAbatement() == true && notification.notification == ControlLoopNotificationType.FINAL_SUCCESS) { + logger.info("{}: {}: waiting for abatement ..", + $params.getClosedLoopControlName(), drools.getRule().getName()); + } else { + logger.info("{}: {}: no abatement expect for {}. Closing the control loop", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event.requestID); + + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + + // + // In this case, we are done + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Unlock the target + // + TargetLock lock = $manager.unlockCurrentOperation(); + if (lock != null) { + logger.debug("{}: {}: retracting lock=", $params.getClosedLoopControlName(), + drools.getRule().getName(), lock); + retract(lock); + } + // + // Retract everything from memory + // + logger.info("{}: {}: retracting onset, manager, and timer", + $params.getClosedLoopControlName(), drools.getRule().getName()); + + retract($manager.getOnsetEvent()); + retract($manager); + retract($clTimer); + } + } + } else { + // + // NOT final, so let's ask for the next operation + // + ControlLoopOperationManager operation = $manager.processControlLoop(); + if (operation != null) { + logger.info("{}: {}: starting operation={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + operation); + // + // insert into memory + // + insert(operation); + // + // insert operation timeout object + // + OperationTimer opTimer = new OperationTimer(); + opTimer.setClosedLoopControlName($event.closedLoopControlName); + opTimer.setRequestID($event.requestID.toString()); + opTimer.setDelay(operation.getOperationTimeout().toString() + "s"); + insert(opTimer); + + // + // Let's ask for a lock right away + // + LockResult<GuardResult, TargetLock> result = $manager.lockCurrentOperation(); + if (result.getA().equals(GuardResult.LOCK_ACQUIRED)) { + logger.info("{}: {}: guard lock acquired={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + result.getB()); + + // + // Insert into memory + // + insert(result.getB()); + } + } else { + // + // Probably waiting for abatement + // + logger.info("{}: {}: no operation, probably waiting for abatement", + $params.getClosedLoopControlName(), drools.getRule().getName()); + } + } + } catch (Exception e) { + logger.warn("{}: {}: unexpected", + $params.getClosedLoopControlName(), + drools.getRule().getName(), e); + + // + // TODO should we abort if we get an exception? + // + } + +end + + + +/* +* +* +* +*/ +rule "${policyName}.EVENT.MANAGER.OPERATION.NOT_LOCKED.TIMEOUT" + timer (int: 5s 5s) + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + not ( TargetLock (requestID == $event.requestID) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation); + + // + // Need to ask for a Lock + // + LockResult<GuardResult, TargetLock> result = $manager.lockCurrentOperation(); + if (result.getA().equals(GuardResult.LOCK_ACQUIRED)) { + logger.info("{}: {}: guard lock acquired={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + result.getB()); + + // + // Insert into memory + // + insert(result.getB()); + } + +end + +/* +* +* Guard Permitted, let's send request to the actor. +* +*/ +rule "${policyName}.EVENT.MANAGER.OPERATION.LOCKED.GUARD_PERMITTED" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID, getGuardApprovalStatus() == "Permit" ) + $lock : TargetLock (requestID == $event.requestID) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={} lock={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock); + + Object request = $operation.getOperationRequest(); + + if (request != null) { + logger.debug("{}: {}: starting operation ..", + $params.getClosedLoopControlName(), drools.getRule().getName()); + // + // Tell interested parties we are performing this Operation + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.notification = ControlLoopNotificationType.OPERATION; + notification.message = $operation.getOperationMessage(); + notification.history = $operation.getHistory(); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + + switch ($operation.policy.getActor()){ + + case "APPC": + + if (request instanceof Request) { + PolicyEngine.manager.deliver("APPC-CL", request); + } + else if (request instanceof LCMRequestWrapper) { + PolicyEngine.manager.deliver("APPC-LCM-READ", request); + } + break; + case "SO": + // at this point the AAI named query request should have already been made, the response recieved and used + // in the construction of the SO Request which is stored in operationRequest + + if(request instanceof SORequest) { + // Call SO. The response will be inserted into memory once it's received + SOActorServiceProvider.sendRequest(drools.getWorkingMemory(), request); + } + break; + case "VFC": + if (request instanceof VFCRequest) { + // Start VFC thread + Thread t = new Thread(new VFCManager(drools.getWorkingMemory(), (VFCRequest)request)); + t.start(); + } + break; + } + } else { + // + // What happens if its null? + // + logger.warn("{}: {}: unexpected null operation request", + $params.getClosedLoopControlName(), + drools.getRule().getName()); + } +end + + +/* +* +* We were able to acquire a lock so now let's ask Xacml Guard whether +* we are allowed to proceed with the request to the actor. +* +*/ +rule "${policyName}.EVENT.MANAGER.OPERATION.LOCKED.GUARD_NOT_YET_QUERIED" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID, getGuardApprovalStatus() == "NONE" ) + $lock : TargetLock (requestID == $event.requestID) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={} lock={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock); + + // + // We are starting the operation but the actor won't be contacted until Guard is queried and permitted. + // + $operation.startOperation($event); + + // + // Sending notification that we are about to query Guard ("DB write - start operation") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.notification = ControlLoopNotificationType.OPERATION; + notification.message = $operation.getOperationMessage(); + notification.history = $operation.getHistory(); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + + // + // Now send Guard Request to XACML Guard. In order to bypass the call to Guard, + // just change guardEnabled to false. + // + // In order to use REST XACML, provide a URL instead of "" as a second argument + // to the CallGuardTask() and set the first argument to null + // (instead of XacmlPdpEngine). + // + boolean guardEnabled = false; + + if(guardEnabled){ + + Thread t = new Thread(new org.onap.policy.guard.CallGuardTask( + PolicyEngine.manager.getEnvironmentProperty("guard.url"), + drools.getWorkingMemory(), + $event.closedLoopControlName, + $operation.policy.getActor().toString(), + $operation.policy.getRecipe(), + $manager.getTargetInstance($operation.policy), + //$event.target, + $event.requestID.toString() + )); + t.start(); + } + else{ + insert(new PolicyGuardResponse("Permit", $event.requestID, $operation.policy.getRecipe())); + } + +end + +// +// This rule will be triggered when a thread talking to the XACML Guard inserts a +// guardResponse object into the working memory +// +rule "${policyName}.GUARD.RESPONSE" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + $lock : TargetLock (requestID == $event.requestID) + $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) + $guardResponse : PolicyGuardResponse(requestID == $event.requestID, $operation.policy.recipe == operation) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={} lock={} opTimer={} guardResponse={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock, $opTimer, $guardResponse); + + + //we will permit the operation if there was no Guard for it + if("Indeterminate".equals($guardResponse.result)){ + $guardResponse.result = "Permit"; + } + + // + // This notification has Guard result in "message". ("DB write - end operation in case of Guard Deny") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.notification = ControlLoopNotificationType.OPERATION; + notification.message = $operation.getOperationMessage($guardResponse.result); + notification.history = $operation.getHistory(); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + + if("Permit".equals($guardResponse.result)){ + + modify($operation){setGuardApprovalStatus($guardResponse.result)}; + } + else { + //This is the Deny case + $operation.setOperationHasGuardDeny(); + retract($opTimer); + retract($operation); + modify($manager) {finishOperation($operation)}; + } + + retract($guardResponse); + +end + +/* +* +* This rule responds to APPC Response Events +* +* I would have like to be consistent and write the Response like this: +* $response : Response( CommonHeader.RequestID == $onset.requestID ) +* +* However, no compile error was given. But a runtime error was given. I think +* because drools is confused between the classname CommonHeader vs the property CommonHeader. +* +*/ +rule "${policyName}.APPC.RESPONSE" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) + $lock : TargetLock (requestID == $event.requestID) + $response : Response( getCommonHeader().RequestID == $event.requestID ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock, $opTimer, $response); + // + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + policyResult); + // + // This Operation has completed, construct a notification showing our results. (DB write - end operation) + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + notification.message = $operation.getOperationHistory(); + notification.history = $operation.getHistory(); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.notification = ControlLoopNotificationType.OPERATION_SUCCESS; + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + } else { + notification.notification = ControlLoopNotificationType.OPERATION_FAILURE; + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + } + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); +end + +/* +* +* The problem with Responses is that they don't have a controlLoopControlName +* field in them, so the only way to attach them is via RequestID. If we have multiple +* control loop .drl's loaded in the same container, we need to be sure the cleanup +* rules don't remove Responses for other control loops. +* +*/ +rule "${policyName}.APPC.RESPONSE.CLEANUP" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $response : Response($id : getCommonHeader().RequestID ) + not ( VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), requestID == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: orphan appc response={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), $id); + + // + // Retract it + // + retract($response); +end + +/* +* +* This rule responds to APPC Response Events using the new LCM interface provided by appc +* +*/ +rule "${policyName}.APPC.LCM.RESPONSE" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) + $lock : TargetLock (requestID == $event.requestID) + $response : LCMResponseWrapper( getBody().getCommonHeader().getRequestId() == $event.requestID ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + policyResult); + + // + // This Operation has completed, construct a notification showing our results. (DB write - end operation) + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + notification.message = $operation.getOperationHistory(); + notification.history = $operation.getHistory(); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.notification = ControlLoopNotificationType.OPERATION_SUCCESS; + } else { + notification.notification = ControlLoopNotificationType.OPERATION_FAILURE; + } + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); +end + +/* +* +* Clean Up any lingering LCM reponses +* +*/ +rule "${policyName}.APPC.LCM.RESPONSE.CLEANUP" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $response : LCMResponseWrapper($id : getBody().getCommonHeader().getRequestId ) + not ( VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), requestID == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: orphan appc response={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), $id); + // + // Retract it + // + retract($response); +end + +/* +* +* This rule responds to SO Response Events +* +*/ +rule "${policyName}.SO.RESPONSE" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) + $lock : TargetLock (requestID == $event.requestID) + $response : SOResponse( request.requestId == $event.requestID.toString() ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + policyResult); + + // + // This Operation has completed, construct a notification showing our results + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + notification.message = $operation.getOperationHistory(); + notification.history = $operation.getHistory(); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.notification = ControlLoopNotificationType.OPERATION_SUCCESS; + } else { + notification.notification = ControlLoopNotificationType.OPERATION_FAILURE; + + } + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); + +end + +/* +* +* This rule responds to VFC Response Events +* +*/ +rule "${policyName}.VFC.RESPONSE" + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) + $lock : TargetLock (requestID == $event.requestID) + $response : VFCResponse( requestId.toString() == $event.requestID.toString() ) + then + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + // + // This Operation has completed, construct a notification showing our results + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + notification.message = $operation.getOperationHistory(); + notification.history = $operation.getHistory(); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); + +end + +/* +* +* This is the timer that manages the timeout for an individual operation. +* +*/ +rule "${policyName}.EVENT.MANAGER.OPERATION.TIMEOUT" + timer (expr: $to ) + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) + $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString(), $to : getDelay() ) + $lock : TargetLock (requestID == $event.requestID) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer); + + // + // Tell it its timed out + // + $operation.setOperationHasTimedOut(); + // + // Create a notification for it ("DB Write - end operation") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + notification.notification = ControlLoopNotificationType.OPERATION_FAILURE; + notification.message = $operation.getOperationHistory(); + notification.history = $operation.getHistory(); + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + // + // Get rid of the timer + // + retract($opTimer); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } +end + +/* +* +* This is the timer that manages the overall control loop timeout. +* +*/ +rule "${policyName}.EVENT.MANAGER.TIMEOUT" + timer (expr: $to ) + when + $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" ) + $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) + $clTimer : ControlLoopTimer ( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString(), $to : getDelay() ) + $operations : LinkedList() + from collect( ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) ) + $opTimers : LinkedList() + from collect( OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) ) + $locks : LinkedList() + from collect( TargetLock (requestID == $event.requestID) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName()); + + if ($operations == null) { + logger.debug("{}: {}: event={} manager={} clTimer={} operations=0", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $clTimer); + } else { + logger.debug("{}: {}: event={} manager={} clTimer={} operations={}", + $params.getClosedLoopControlName(), drools.getRule().getName(), + $event, $manager, $clTimer, $operations.size()); + } + // + // Tell the Event Manager it has timed out + // + VirtualControlLoopNotification notification = $manager.setControlLoopTimedOut(); + if (notification != null) { + notification.from = "policy"; + notification.policyName = drools.getRule().getName(); + notification.policyScope = "${policyScope}"; + notification.policyVersion = "${policyVersion}"; + // + // Let interested parties know + // + PolicyEngine.manager.deliver("POLICY-CL-MGT", notification); + } + // + // Retract EVERYTHING + // + retract($event); + retract($manager); + retract($clTimer); + if ($operations != null && $operations.size() > 0) { + Iterator<ControlLoopOperationManager> iter = $operations.iterator(); + while (iter.hasNext()) { + ControlLoopOperationManager manager = iter.next(); + retract(manager); + } + } + if ($opTimers != null && $opTimers.size() > 0) { + Iterator<OperationTimer> iter = $opTimers.iterator(); + while (iter.hasNext()) { + OperationTimer opTimer = iter.next(); + retract(opTimer); + } + } + if ($locks != null && $locks.size() > 0) { + Iterator<TargetLock> iter = $locks.iterator(); + while (iter.hasNext()) { + TargetLock lock = iter.next(); + // + // Ensure we release the lock + // + PolicyGuard.unlockTarget(lock); + // + // + // + retract(lock); + } + } +end
\ No newline at end of file diff --git a/config/pe/push-policies.sh b/config/pe/push-policies.sh index 02d1f254..a64c8e17 100644 --- a/config/pe/push-policies.sh +++ b/config/pe/push-policies.sh @@ -1,121 +1,202 @@ #! /bin/bash +#########################################Upload BRMS Param Template########################################## -echo "Pushing default policies" +echo "Upload BRMS Param Template" -# Sometimes brmsgw gets an error when trying to retrieve the policies on initial push, -# so for the BRMS policies we will do a push, then delete from the pdp group, then push again. -# Second push should be successful. +curl -v --silent -X POST --header 'Content-Type: multipart/form-data' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' +-F "file=@ClosedLoopControlName.drl" +'http://pdp:8081/pdp/api/policyEngineImport?importParametersJson=%7B%22serviceName%22%3A%ClosedLoopControlName%22%2C%20%22serviceType%22%20%3A%20%22BRMSPARAM%22%20%7D' -echo "pushPolicy : PUT : com.vFirewall" -curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ - "pdpGroup": "default", - "policyName": "com.vFirewall", - "policyType": "MicroService" -}' 'http://pdp:8081/pdp/api/pushPolicy' +#########################################Create BRMS Param policies########################################## + +echo "Create BRMSParam Operational Policies" sleep 2 -echo "pushPolicy : PUT : com.vLoadBalancer" -curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ - "pdpGroup": "default", - "policyName": "com.vLoadBalancer", - "policyType": "MicroService" -}' 'http://pdp:8081/pdp/api/pushPolicy' +echo "Create BRMSParamvFirewall Policy" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "policyConfigType": "BRMS_PARAM", + "policyName": "com.BRMSParamvFirewall", + "policyDescription": "BRMS Param vFirewall policy", + "policyScope": "com", + "attributes": { + "MATCHING": { + "controller" : "amsterdam" + }, + "RULE": { + "templateName": "ClosedLoopControlName", + "closedLoopControlName": "ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a", + "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a%0D%0A++services%3A%0D%0A++++-+serviceInvariantUUID%3A+5cfe6f4a-41bc-4247-8674-ebd4b98e35cc%0D%0A++++++serviceUUID%3A+0f40bba5-986e-4b3c-803f-ddd1b7b25f24%0D%0A++++++serviceName%3A+57e66ea7-0ed6-45c7-970f%0D%0A++trigger_policy%3A+unique-policy-id-1-modifyConfig%0D%0A++timeout%3A+1200%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-modifyConfig%0D%0A++++name%3A+modify+packet+gen+config%0D%0A++++description%3A%0D%0A++++actor%3A+APPC%0D%0A++++recipe%3A+ModifyConfig%0D%0A++++target%3A%0D%0A++++++resourceID%3A+Eace933104d443b496b8.nodes.heat.vpg%0D%0A++++++type%3A+VNF%0D%0A++++retry%3A+0%0D%0A++++timeout%3A+300%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard" + } + } +}' 'http://pdp:8081/pdp/api/createPolicy' sleep 2 -echo "pushPolicy : PUT : com.BRMSParamvLBDemoPolicy" -curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ - "pdpGroup": "default", - "policyName": "com.BRMSParamvLBDemoPolicy", - "policyType": "BRMS_Param" -}' 'http://pdp:8081/pdp/api/pushPolicy' +echo "Create BRMSParamvDNS Policy" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "policyConfigType": "BRMS_PARAM", + "policyName": "com.BRMSParamvDNS", + "policyDescription": "BRMS Param vDNS policy", + "policyScope": "com", + "attributes": { + "MATCHING": { + "controller" : "amsterdam" + }, + "RULE": { + "templateName": "ClosedLoopControlName", + "closedLoopControlName": "ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3", + "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3%0D%0A++services%3A%0D%0A++++-+serviceName%3A+d4738992-6497-4dca-9db9%0D%0A++++++serviceInvariantUUID%3A+dc112d6e-7e73-4777-9c6f-1a7fb5fd1b6f%0D%0A++++++serviceUUID%3A+2eea06c6-e1d3-4c3a-b9c4-478c506eeedf%0D%0A++trigger_policy%3A+unique-policy-id-1-scale-up%0D%0A++timeout%3A+1200%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-scale-up%0D%0A++++name%3A+Create+a+new+VF+Module%0D%0A++++description%3A%0D%0A++++actor%3A+MSO%0D%0A++++recipe%3A+VF+Module+Create%0D%0A++++target%3A%0D%0A++++++type%3A+VNF%0D%0A++++retry%3A+0%0D%0A++++timeout%3A+1200%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard" + } + } +}' 'http://pdp:8081/pdp/api/createPolicy' sleep 2 -echo "pushPolicy : PUT : com.BRMSParamvFWDemoPolicy" -curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ - "pdpGroup": "default", - "policyName": "com.BRMSParamvFWDemoPolicy", - "policyType": "BRMS_Param" -}' 'http://pdp:8081/pdp/api/pushPolicy' +echo "Create BRMSParamVOLTE Policy" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "policyConfigType": "BRMS_PARAM", + "policyName": "com.BRMSParamVOLTE", + "policyDescription": "BRMS Param VOLTE policy", + "policyScope": "com", + "attributes": { + "MATCHING": { + "controller" : "amsterdam" + }, + "RULE": { + "templateName": "ClosedLoopControlName", + "closedLoopControlName": "ControlLoop-VOLTE-2179b738-fd36-4843-a71a-a8c24c70c55b", + "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-VOLTE-2179b738-fd36-4843-a71a-a8c24c70c55b%0D%0A++trigger_policy%3A+unique-policy-id-1-restart%0D%0A++timeout%3A+3600%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-restart%0D%0A++++name%3A+Restart+the+VM%0D%0A++++description%3A%0D%0A++++actor%3A+VFC%0D%0A++++recipe%3A+Restart%0D%0A++++target%3A%0D%0A++++++type%3A+VM%0D%0A++++retry%3A+3%0D%0A++++timeout%3A+1200%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard" + } + } +}' 'http://pdp:8081/pdp/api/createPolicy' sleep 2 -echo "deletePolicy : DELETE : com.vFirewall" -curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ -"pdpGroup": "default", -"policyComponent": "PDP", -"policyName": "com.vFirewall", -"policyType": "MicroService" -}' 'http://pdp:8081/pdp/api/deletePolicy' - +echo "Create BRMSParamvCPE Policy" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "policyConfigType": "BRMS_PARAM", + "policyName": "com.BRMSParamvCPE", + "policyDescription": "BRMS Param vCPE policy", + "policyScope": "com", + "attributes": { + "MATCHING": { + "controller" : "amsterdam" + }, + "RULE": { + "templateName": "ClosedLoopControlName", + "closedLoopControlName": "ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e", + "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e%0D%0A++trigger_policy%3A+unique-policy-id-1-restart%0D%0A++timeout%3A+3600%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-restart%0D%0A++++name%3A+Restart+the+VM%0D%0A++++description%3A%0D%0A++++actor%3A+APPC%0D%0A++++recipe%3A+Restart%0D%0A++++target%3A%0D%0A++++++type%3A+VM%0D%0A++++retry%3A+3%0D%0A++++timeout%3A+1200%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard" + } + } +}' 'http://pdp:8081/pdp/api/createPolicy' + +#########################################Create Micro Service Config policies########################################## + +echo "Create MicroService Config Policies" sleep 2 -echo "deletePolicy : DELETE : com.vLoadBalancer" -curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ -"pdpGroup": "default", -"policyComponent": "PDP", -"policyName": "com.vLoadBalancer", -"policyType": "MicroService" -}' 'http://pdp:8081/pdp/api/deletePolicy' +echo "Create MicroServicevFirewall Policy" +curl -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: DEVL' -d '{ + "configBody": "{\"service\": \"policy_tosca_tca\",\"location\": \"SampleServiceLocation\",\"uuid\": \"test\",\"policyName\": \"MicroServicevFirewall\",\"description\": \"MicroService vFirewall Policy\",\"configName\": \"SampleConfigName\",\"templateVersion\": \"OpenSource.version.1\",\"version\": \"1.0.0\",\"priority\": \"1\",\"policyScope\": \"resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop\",\"riskType\": \"SampleRiskType\",\"riskLevel\": \"1\",\"guard\": \"False\",\"content\": {\"policyVersion\": \"v0.0.1\",\"threshholds\": [{\"severity\": \"MAJOR\",\"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\",\"thresholdValue\": \"4000\",\"closedLoopEventStatus\": \"ONSET\",\"closedLoopControlName\": \"CL-FRWL-LOW-TRAFFIC-SIG-d925ed73-8231-4d02-9545-db4e101f88f8\",\"version\": \"1.0.2\",\"direction\": \"LESS_OR_EQUAL\"}, {\"severity\": \"CRITICAL\",\"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\",\"thresholdValue\": \"20000\",\"closedLoopEventStatus\": \"ONSET\",\"closedLoopControlName\": \"CL-FRWL-HIGH-TRAFFIC-SIG-EA36FE84-9342-5E13-A656-EC5F21309A09\",\"version\": \"1.0.2\",\"direction\": \"GREATER_OR_EQUAL\"}],\"policyName\": \"DCAE.Config_tca-hi-lo\",\"controlLoopSchemaType\": \"VNF\",\"policyScope\": \"DCAE\",\"eventName\": \"vFirewallBroadcastPackets\"}}", + "policyConfigType": "MicroService", + "policyName": "com.MicroServicevFirewall", + "onapName": "DCAE" +}' 'http://pdp:8081/pdp/api/createPolicy' + sleep 2 -echo "deletePolicy : DELETE : com.BRMSParamvFWDemoPolicy" -curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ -"pdpGroup": "default", -"policyComponent": "PDP", -"policyName": "com.BRMSParamvFWDemoPolicy", -"policyType": "BRMS_Param" -}' 'http://pdp:8081/pdp/api/deletePolicy' +echo "Create MicroServicevDNS Policy" +curl -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: DEVL' -d '{ + "configBody": "{ \"service\": \"policy_tosca_tca\", \"location\": \"SampleServiceLocation\", \"uuid\": \"test\", \"policyName\": \"MicroServicevDNS\", \"description\": \"MicroService vDNS Policy\", \"configName\": \"SampleConfigName\", \"templateVersion\": \"OpenSource.version.1\", \"version\": \"1.0.0\", \"priority\": \"1\", \"policyScope\": \"resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop\", \"riskType\": \"SampleRiskType\", \"riskLevel\": \"1\", \"guard\": \"False\", \"content\": { \"policyVersion\": \"v0.0.1\", \"threshholds\": [{ \"severity\": \"MAJOR\", \"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\", \"thresholdValue\": \"500\", \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"CL-LBAL-LOW-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241AB1A\", \"version\": \"1.0.2\", \"direction\": \"LESS_OR_EQUAL\" }, { \"severity\": \"CRITICAL\", \"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\", \"thresholdValue\": \"5000\", \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"CL-LBAL-HIGH-TRAFFIC-SIG-0C5920A6-B564-8035-C878-0E814352BC2B\", \"version\": \"1.0.2\", \"direction\": \"GREATER_OR_EQUAL\" }], \"policyName\": \"DCAE.Config_tca-hi-lo\", \"controlLoopSchemaType\": \"VM\", \"policyScope\": \"DCAE\", \"eventName\": \"vLoadBalancer\" } }", + "policyConfigType": "MicroService", + "policyName": "com.MicroServicevDNS", + "onapName": "DCAE" +}' 'http://pdp:8081/pdp/api/createPolicy' sleep 2 -echo "deletePolicy : DELETE : com.BRMSParamvLBDemoPolicy" -curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ -"pdpGroup": "default", -"policyComponent": "PDP", -"policyName": "com.BRMSParamvLBDemoPolicy", -"policyType": "BRMS_Param" -}' 'http://pdp:8081/pdp/api/deletePolicy' +echo "Create MicroServicevCPE Policy" +curl -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: DEVL' -d '{ + "configBody": "{ \"service\": \"policy_tosca_tca\", \"location\": \"SampleServiceLocation\", \"uuid\": \"test\", \"policyName\": \"MicroServicevCPE\", \"description\": \"MicroService vCPE Policy\", \"configName\": \"SampleConfigName\", \"templateVersion\": \"OpenSource.version.1\", \"version\": \"1.0.0\", \"priority\": \"1\", \"policyScope\": \"resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop\", \"riskType\": \"SampleRiskType\", \"riskLevel\": \"1\", \"guard\": \"False\", \"content\": { \"policyVersion\": \"v0.0.1\", \"threshholds\": [{ \"severity\": \"MAJOR\", \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedDiscardedPacketsDelta\", \"thresholdValue\": \"0\", \"closedLoopEventStatus\": \"ABATED\", \"closedLoopControlName\": \"CL-vCPEvGMUX-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241ABA1\", \"version\": \"1.0.2\", \"direction\": \"EQUAL\" }, { \"severity\": \"CRITICAL\", \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedDiscardedPacketsDelta\", \"thresholdValue\": \"1000\", \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"CL-vCPEvGMUX-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241ABA1\", \"version\": \"1.0.2\", \"direction\": \"GREATER_OR_EQUAL\" }], \"policyName\": \"DCAE.Config_tca-hi-lo\", \"controlLoopSchemaType\": \"VM\", \"policyScope\": \"DCAE\", \"eventName\": \"vCPEvGMUXPacketLoss\" } }", + "policyConfigType": "MicroService", + "policyName": "com.MicroServicevCPE", + "onapName": "DCAE" +}' 'http://pdp:8081/pdp/api/createPolicy' + + + +#########################################Pushing BRMS Param policies########################################## + +echo "Pushing BRMSParam Operational policies" sleep 2 -echo "pushPolicy : PUT : com.vFirewall" +echo "pushPolicy : PUT : com.BRMSParamvFirewall" curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ "pdpGroup": "default", - "policyName": "com.vFirewall", - "policyType": "MicroService" + "policyName": "com.BRMSParamvFirewall", + "policyType": "BRMS_Param" }' 'http://pdp:8081/pdp/api/pushPolicy' sleep 2 -echo "pushPolicy : PUT : com.vLoadBalancer" +echo "pushPolicy : PUT : com.BRMSParamvDNS" curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ "pdpGroup": "default", - "policyName": "com.vLoadBalancer", - "policyType": "MicroService" -}' 'http://pdp:8081/pdp/api/pushPolicy' + "policyName": "com.BRMSParamvDNS", + "policyType": "BRMS_Param" +}' 'http://pdp:8081/pdp/api/pushPolicy' sleep 2 -echo "pushPolicy : PUT : com.BRMSParamvLBDemoPolicy" +echo "pushPolicy : PUT : com.BRMSParamVOLTE" curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ "pdpGroup": "default", - "policyName": "com.BRMSParamvLBDemoPolicy", + "policyName": "com.BRMSParamVOLTE", "policyType": "BRMS_Param" }' 'http://pdp:8081/pdp/api/pushPolicy' sleep 2 -echo "pushPolicy : PUT : com.BRMSParamvFWDemoPolicy" +echo "pushPolicy : PUT : com.BRMSParamvCPE" curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ "pdpGroup": "default", - "policyName": "com.BRMSParamvFWDemoPolicy", + "policyName": "com.BRMSParamvCPE", "policyType": "BRMS_Param" }' 'http://pdp:8081/pdp/api/pushPolicy' +#########################################Pushing MicroService Config policies########################################## + +echo "Pushing MicroService Config policies" + +sleep 2 + +echo "pushPolicy : PUT : com.MicroServicevFirewall" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "pdpGroup": "default", + "policyName": "com.MicroServicevFirewall", + "policyType": "MicroService" +}' 'http://pdp:8081/pdp/api/pushPolicy' + +sleep 2 + +echo "pushPolicy : PUT : com.MicroServicevDNS" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "pdpGroup": "default", + "policyName": "com.MicroServicevDNS", + "policyType": "MicroService" +}' 'http://pdp: 8081/pdp/api/pushPolicy' + +sleep 2 + +echo "pushPolicy : PUT : com.MicroServicevCPE" +curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{ + "pdpGroup": "default", + "policyName": "com.MicroServicevCPE", + "policyType": "MicroService" +}' 'http://pdp: 8081/pdp/api/pushPolicy'
\ No newline at end of file |