Initial OpenECOMP policy/docker commit

Change-Id: Ib37c3693614ee21a78f838e63eb40319cc85bdc6
Signed-off-by: Pamela Dragosh <pdragosh@research.att.com>

1 files changed, 851 insertions, 0 deletions

diff --git a/policy-drools/docker-install.sh b/policy-drools/docker-install.sh
new file mode 100644
index 00000000..fd920648
--- /dev/null
+++ b/policy-drools/docker-install.sh
@@ -0,0 +1,851 @@
+#!/bin/bash
+
+###
+# ============LICENSE_START=======================================================
+# Installation Package
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+
+function JAVA_HOME() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+		
+	if [[ -z ${JAVA_HOME} ]]; then
+		echo "error: aborting installation: JAVA_HOME variable must be present in base.conf"
+		exit 1;
+	fi
+	
+	echo "JAVA_HOME is ${JAVA_HOME}"
+}
+
+function POLICY_HOME() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	if [[ -z ${POLICY_HOME} ]]; then
+		echo "error: aborting installation: the installation directory POLICY_HOME must be set"
+		exit 1
+	fi
+	
+	POLICY_HOME_ABS=$(readlink -f "${POLICY_HOME}")
+	if [[ -n ${POLICY_HOME_ABS} ]]; then
+		export POLICY_HOME=${POLICY_HOME_ABS}
+	fi
+	
+	echo "POLICY_HOME is ${POLICY_HOME}"
+	
+	# Do not allow installations from within POLICY_HOME dir or sub-dirs
+	if [[ "$(pwd)/" == ${POLICY_HOME}/* ]]; then
+	 	echo "error: aborting installation: cannot be executed from '${POLICY_HOME}' or sub-directories. "
+	 	exit 1
+	fi
+}
+
+function check_java() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	TARGET_JAVA_VERSION=$1
+	
+	if [[ -z ${JAVA_HOME} ]]; then
+		echo "error: ${JAVA_HOME} is not set"
+		return 1
+	fi
+	
+	if ! check_x_file "${JAVA_HOME}/bin/java"; then
+		echo "error: ${JAVA_HOME}/bin/java is not accessible"
+		return 1
+	fi
+	
+	INSTALLED_JAVA_VERSION=$("${JAVA_HOME}/bin/java" -version 2>&1 | awk -F '"' '/version/ {print $2}')
+	if [[ -z $INSTALLED_JAVA_VERSION ]]; then
+		echo "error: ${JAVA_HOME}/bin/java is invalid"
+		return 1
+	fi
+	
+	if [[ "${INSTALLED_JAVA_VERSION}" != ${TARGET_JAVA_VERSION}* ]]; then
+		echo "error: java version (${INSTALLED_JAVA_VERSION}) does not"\
+			 "march desired version ${TARGET_JAVA_VERSION}"
+		return 1
+	fi 
+	
+	echo "OK: java ${INSTALLED_JAVA_VERSION} installed"
+	
+	if ! type -p "${JAVA_HOME}/bin/keytool" > /dev/null 2>&1; then
+		echo "error: {JAVA_HOME}/bin/keytool is not installed"
+		return 1
+	fi
+}
+
+function process_configuration() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	CONF_FILE=$1
+	while read line || [ -n "${line}" ]; do
+        if [[ -n ${line} ]] && [[ ${line} != *#* ]]; then
+	        name=$(echo "${line%%=*}")
+	        value=$(echo "${line#*=}")
+	        # escape ampersand so that sed does not replace it with the search string
+            value=${value//&/\\&}
+	        if [[ -z ${name} ]] || [[ -z $value ]]; then
+	        	echo "WARNING: ${line} missing name or value"
+	    	fi
+	    	export ${name}="${value}"
+	        eval "${name}" "${value}" 2> /dev/null
+        fi
+	done < "${CONF_FILE}"
+	return 0
+}
+
+function component_preinstall() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+
+	/bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \
+		-e 's!${{FQDN}}!'"${FQDN}!g" \
+		*.conf > /dev/null 2>&1
+}
+
+function configure_component() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+		
+	CONF_FILE=$1
+	COMPONENT_ROOT_DIR=$2
+	
+	SED_LINE="sed -i"
+	SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' "
+	SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' "
+	SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' "
+	SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' "
+	SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' "
+		
+	while read line || [ -n "${line}" ]; do
+        if [[ -n $line ]] && [[ $line != *#* ]]; then
+	        name=$(echo "${line%%=*}")
+	        value=$(echo "${line#*=}")
+	        # escape ampersand so that sed does not replace it with the search string
+            value=${value//&/\\&}
+	    	if [[ -z ${name} ]] || [[ -z ${value} ]]; then
+	        	echo "WARNING: ${line} missing name or value"
+	    	fi
+	    	SED_LINE+=" -e 's!\${{${name}}}!${value}!g' "
+	        
+        fi
+	done < "$CONF_FILE"
+	
+	SED_FILES=""
+	for sed_file in $(find "${COMPONENT_ROOT_DIR}" -path ${COMPONENT_ROOT_DIR}/backup -prune -o -name '*.xml' -o -name '*.sh' -o -name '*.properties' -o -name '*.json' -o -name '*.conf' -o -name '*.cfg' -o -name '*.template' -o -name '*.conf' -o -name '*.cron'); do
+		if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then
+			SED_FILES+="${sed_file} "
+		fi
+	done
+
+	if [[ -z ${SED_FILES} ]]; then
+		echo "WARNING: no xml, sh, properties, or conf files to perform configuration expansion"
+	else
+		SED_LINE+=${SED_FILES}
+		eval "${SED_LINE}"
+	fi
+}
+
+function configure_settings() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+
+	# The goal is to have repositories for both 'release' and 'snapshot'
+	# artifacts. These may either be remote (e.g. Nexus) repositories, or
+	# a local file-based repository. 
+	local fileRepoID=file-repository
+	local fileRepoUrl=file:$HOME_M2/file-repository
+	mkdir -p "${fileRepoUrl#file:}"
+		
+	# The following parameters are also used outside of this function.
+	# if snapshotRepositoryUrl and/or releaseRepositoryUrl is defined,
+	# the corresponding ID and url will be updated below
+	releaseRepoID=${fileRepoID}
+	releaseRepoUrl=${fileRepoUrl}
+	snapshotRepoID=${fileRepoID}
+	snapshotRepoUrl=${fileRepoUrl}
+
+	# if both snapshotRepositoryUrl and releaseRepositoryUrl are null,
+	# use standalone-settings.xml that just defines the file-based repo.
+	# if only one of them is specified, use file-based repo for the other.
+	if [[ -z "$snapshotRepositoryUrl" && -z $releaseRepositoryUrl ]]; then
+		echo "snapshotRepositoryUrl and releaseRepositoryUrl properties not set, configuring settings.xml for standalone operation"
+		mv $HOME_M2/standalone-settings.xml $HOME_M2/settings.xml
+	else
+		rm $HOME_M2/standalone-settings.xml
+
+		if [[ -n "${snapshotRepositoryUrl}" ]] ; then
+			snapshotRepoID=${snapshotRepositoryID}
+			snapshotRepoUrl=${snapshotRepositoryUrl}
+		fi
+		if [[ -n "${releaseRepositoryUrl}" ]] ; then
+			releaseRepoID=${releaseRepositoryID}
+			releaseRepoUrl=${releaseRepositoryUrl}
+		fi
+	fi
+
+	SED_LINE="sed -i"
+	SED_LINE+=" -e 's!\${{snapshotRepositoryID}}!${snapshotRepoID}!g' "
+	SED_LINE+=" -e 's!\${{snapshotRepositoryUrl}}!${snapshotRepoUrl}!g' "
+	SED_LINE+=" -e 's!\${{releaseRepositoryID}}!${releaseRepoID}!g' "
+	SED_LINE+=" -e 's!\${{releaseRepositoryUrl}}!${releaseRepoUrl}!g' "
+	SED_LINE+=" -e 's!\${{repositoryUsername}}!${repositoryUsername}!g' "
+	SED_LINE+=" -e 's!\${{repositoryPassword}}!${repositoryPassword}!g' "
+	SED_LINE+=" -e 's!\${{fileRepoID}}!${fileRepoID}!g' "
+	SED_LINE+=" -e 's!\${{fileRepoUrl}}!${fileRepoUrl}!g' "
+	
+	SED_LINE+="$HOME_M2/settings.xml"
+	eval "${SED_LINE}"
+	
+}
+
+
+function check_r_file() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+
+	FILE=$1
+	if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then
+        return 1
+	fi
+
+	return 0
+}
+
+function check_x_file() {	
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+
+	FILE=$1
+	if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then
+        return 1
+	fi
+
+	return 0
+}
+
+function install_prereqs() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	CONF_FILE=$1
+	
+	if ! check_r_file "${CONF_FILE}"; then
+		echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible"
+		exit 1
+	fi
+	
+	if ! process_configuration "${CONF_FILE}"; then
+		echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}"
+		exit 1
+	fi
+	
+	if ! check_java "1.8"; then
+		echo "error: aborting ${COMPONENT_TYPE} installation: invalid java version"
+		exit 1
+	fi
+	
+
+	if [[ -z ${POLICY_HOME} ]]; then
+		echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set"
+		exit 1	
+	fi
+
+	HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}')
+	if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then
+		echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory"
+		exit 1
+	fi
+	
+	echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} "
+	echo "ownership with umask $(umask)."
+}
+
+function configure_base() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	# check if fqdn is set in base.conf and use that value if set
+	if [[ -z ${INSTALL_FQDN} ]]
+	then
+		echo "FQDN not set in config...using the default FQDN ${FQDN}"
+	else
+		echo "Using FQDN ${INSTALL_FQDN} from config"
+		FQDN=${INSTALL_FQDN}
+	fi
+
+	configure_component "${BASE_CONF}" "${POLICY_HOME}"
+	
+	configure_settings
+	
+	BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
+	PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
+
+	# Note: adding to .bashrc instead of .bash_profile
+	if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bashrc" >/dev/null 2>&1; then
+		echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bashrc"
+	fi
+
+	if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then
+		echo "${PROFILE_LINE}" >> "${HOME}/.profile"
+	fi
+
+	
+	. "${POLICY_HOME}/etc/profile.d/env.sh"
+	
+	cat "${POLICY_HOME}"/etc/cron.d/* | crontab
+}
+
+function install_base() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	install_prereqs "${BASE_CONF}"
+
+	# following properties must be set:
+	# POLICY_HOME - installation directory, must exist and be writable
+
+	# test that all required properties are set
+	for var in POLICY_HOME JAVA_HOME
+	do
+		if [[ -z $(eval echo \$$var) ]]; then
+			echo "ERROR: $var must be set in $BASE_CONF"
+			exit 1
+		fi
+	done
+
+	if [[ ! ( -d "$POLICY_HOME" && -w "$POLICY_HOME" ) ]]; then
+		echo "ERROR: Installation directory $POLICY_HOME does not exist or not writable"
+		exit 1
+	fi
+
+	if ! /bin/rm -fr "${POLICY_HOME}"/* > /dev/null 2>&1; then
+		echo "error: aborting base installation: cannot delete the underlying ${POLICY_HOME} files"
+		exit 1
+	fi
+	
+	POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null)
+	if [[ -n ${POLICY_HOME_CONTENTS} ]]; then
+		echo "error: aborting base installation: ${POLICY_HOME} directory is not empty"
+		exit 1
+	fi
+	
+	if ! /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1; then	
+		echo "error: aborting base installation: cannot create ${POLICY_HOME}/logs/"
+		exit 1
+	fi	
+	
+	BASE_TGZ=$(ls base-*.tar.gz)
+	if [ ! -r ${BASE_TGZ} ]; then
+		echo "error: aborting: base package is not accessible"
+		exit 1			
+	fi
+	
+	tar -tzf ${BASE_TGZ} > /dev/null 2>&1
+	if [[ $? != 0 ]]; then
+		echo >&2 "error: aborting installation: invalid base package file: ${BASE_TGZ}"
+		exit 1
+	fi
+	
+	BASEX_TGZ=$(ls basex-*.tar.gz)
+	if [ ! -r ${BASEX_TGZ} ]; then
+		echo "warning: basex package is not accessible"
+		BASEX_TGZ=
+	else
+		tar -tzf ${BASEX_TGZ} > /dev/null 2>&1
+		if [[ $? != 0 ]]; then
+			echo >&2 "warning: invalid basex package tar file: ${BASEX_TGZ}"
+			BASEX_TGZ=
+		fi			
+	fi
+
+	
+	# Undo any changes in the $HOME directory if any
+	
+	BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
+#	PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
+		
+	# Note: using .bashrc instead of .bash_profile
+	if [[ -f ${HOME}/.bashrc ]]; then
+		/bin/sed -i.bak "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc"
+	fi
+	
+#	if [[ -f ${HOME}/.profile ]]; then
+#		/bin/sed -i.bak "\:${PROFILE_LINE}:d" "${HOME}/.profile"
+#	fi
+	
+	tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner
+	if [[ $? != 0 ]]; then
+		# this should not happened
+		echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}"
+		exit 1
+	fi
+	
+	if [ ! -z ${BASEX_TGZ} ]; then
+		tar -C ${POLICY_HOME} -xf ${BASEX_TGZ} --no-same-owner
+		if [[ $? != 0 ]]; then
+			# this should not happened
+			echo "warning: basex package cannot be unpacked: ${BASEX_TGZ}"
+		fi
+	fi
+
+#	/bin/mkdir -p ${POLICY_HOME}/etc/ssl > /dev/null 2>&1
+#	/bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1
+#	/bin/mkdir -p ${POLICY_HOME}/nagios/tmp > /dev/null 2>&1
+#	/bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1
+#	/bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1
+			
+#	chmod -R 755 ${POLICY_HOME}/nagios > /dev/null 2>&1
+	
+	HOME_M2=$HOME/.m2
+	if [[ -d $HOME_M2 ]]; then
+		echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP"
+		mv $HOME_M2 $HOME/m2.$TIMESTAMP
+		if [[ $? != 0 ]]; then
+			echo "WARNING: Failed to rename $HOME_M2 directory; will use old directory"
+		fi
+	fi
+	if [[ ! -d $HOME_M2 ]]; then
+		echo "Moving m2 directory to $HOME_M2"
+		mv $POLICY_HOME/m2 $HOME_M2
+		if [[ $? != 0 ]]; then
+			echo "ERROR: Error in moving m2 directory"
+			exit 1
+		fi
+	fi
+	
+	configure_base
+	
+#	if ! create_keystore; then
+#		echo "error: aborting base installation: creating keystore"
+#		exit 1
+#	fi
+	
+#	list_unexpanded_files ${POLICY_HOME}
+
+}
+
+function install_controller()
+{
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	if [[ -f "${HOME}/.bashrc" ]]; then
+		source "${HOME}/.bashrc"
+	fi
+	
+	if [[ -z ${POLICY_HOME} ]]; then
+		echo "error: aborting installation: POLICY_HOME environment variable is not set."
+		exit 1	
+	fi
+	
+	if ! check_r_file ${POLICY_HOME}/etc/profile.d/env.sh; then
+		echo "error: aborting installation: ${POLICY_HOME}/etc/profile.d/env.sh is not accessible"
+		exit 1	
+	fi
+	
+	CONTROLLER_CONF=$COMPONENT_TYPE.conf
+	install_prereqs "${CONTROLLER_CONF}"
+
+	# following properties must be set in conf file:
+	# CONTROLLER_ARTIFACT_ID - Maven artifactId for controller
+	# CONTROLLER_NAME - directory name for the controller; controller will be installed to
+	#                   $POLICY_HOME/controllers/$CONTROLLER_NAME
+	# CONTROLLER_PORT - port number for the controller REST interface
+	# RULES_ARTIFACT -  rules artifact specifier: groupId:artifactId:version
+	
+	# test that all required properties are set
+	for var in CONTROLLER_ARTIFACT_ID CONTROLLER_NAME CONTROLLER_PORT RULES_ARTIFACT UEB_TOPIC
+	do
+		if [[ -z $(eval echo \$$var) ]]; then
+			echo "ERROR: $var must be set in $CONTROLLER_CONF"
+			exit 1
+		fi
+	done
+	
+	CONTROLLER_ZIP=$(ls $CONTROLLER_ARTIFACT_ID*.zip 2>&-)
+	if [[ -z $CONTROLLER_ZIP ]]; then
+		echo "ERROR: Cannot find controller zip file ($CONTROLLER_ARTIFACT_ID*.zip)"
+		exit 1
+	fi
+
+	if [[ ! "$CONTROLLER_NAME" =~ ^[A-Za-z0-9_-]+$ ]]; then
+		echo "ERROR: CONTROLLER_NAME may only contain alphanumeric, underscore, and dash characters"
+		exit 1
+	fi
+
+	if [[ ! "$CONTROLLER_PORT" =~ ^[0-9]+$ ]]; then
+		echo "ERROR: CONTROLLER_PORT is not a valid integer"
+		exit 1
+	fi
+
+	# split artifact string into parts
+	IFS=: read RULES_GROUPID RULES_ARTIFACTID RULES_VERSION <<<$RULES_ARTIFACT
+	if [[ -z $RULES_GROUPID || -z $RULES_ARTIFACTID || -z $RULES_VERSION ]]; then
+		echo "ERROR: Invalid setting for RULES_ARTIFACT property"
+		exit 1
+	fi
+
+	#RULES_JAR=$RULES_ARTIFACTID-$RULES_VERSION.jar
+	RULES_JAR=$(echo ${RULES_ARTIFACTID}-*.jar)
+	if ! check_r_file $RULES_JAR; then
+		echo "WARNING: Rules jar file $RULES_JAR not found in installer package, must be installed manually"
+		RULES_JAR=
+	fi
+
+
+	SOURCE_DIR=$PWD
+	CONTROLLER_DIR=$POLICY_HOME
+
+	cd $CONTROLLER_DIR
+
+	echo "Unpacking controller zip file"
+	# use jar command in case unzip not present on system
+	jar xf $SOURCE_DIR/$CONTROLLER_ZIP
+	if [[ $? != 0 ]]; then
+		echo "ERROR: unpack of controller zip file failed, install aborted"
+		exit 1
+	fi
+
+	chmod +x bin/*
+
+	# Perform base variable replacement in controller config file
+	configure_component "${SOURCE_DIR}/${BASE_CONF}" "${CONTROLLER_DIR}"
+	
+	# Perform variable replacements in config files.
+	# config files may contain the following strings that need to be replaced with
+	# real values:
+	#	AAAA - artifactId
+	#	BBBB - Substring of AAAA after first dash (stripping initial "ncomp-" or "policy-")
+	#	PORT - Port number for REST server
+
+	echo "Performing variable replacement in config files"
+	AAAA=$CONTROLLER_ARTIFACT_ID
+	BBBB=${AAAA#[a-z]*-}
+	PORT=$CONTROLLER_PORT
+	UTOPIC=${UEB_TOPIC}
+
+	for file in config/*
+	do
+		sed -i -e "s/AAAA/$AAAA/" -e "s/BBBB/$BBBB/" -e "s/PORT/$PORT/" -e "s!\${{UEB_TOPIC}}!${UTOPIC}!" $file
+		if [[ $? != 0 ]]; then
+			echo "ERROR: variable replacement failed for file $file, install aborted"
+			exit 1
+		fi
+	done
+
+	mv config/makefile .
+
+	# append properties for rules artifact to server properties
+	cat >>config/server.properties <<EOF
+
+rules.groupId=$RULES_GROUPID
+rules.artifactId=$RULES_ARTIFACTID
+rules.version=$RULES_VERSION
+EOF
+
+	# TODO: run pw.sh script to set passwords
+
+	# return to directory where we started
+	cd $SOURCE_DIR
+	
+	# install rules jar into repository if present
+	if [[ -n $RULES_JAR ]]; then
+		# can't use RULES_VERSION because may be set to "LATEST",
+		# so extract version from the jar filename
+		ARTIFACT_VERSION=$(sed -e "s/${RULES_ARTIFACTID}-//" -e "s/\.jar//" <<<${RULES_JAR})
+		if [[ -n $repositoryUrl ]]; then
+			echo "Deploying rules artifact to Policy Repository"
+			mvn deploy:deploy-file -Dfile=$RULES_JAR \
+				-DgroupId=$RULES_GROUPID -DartifactId=$RULES_ARTIFACTID -Dversion=$ARTIFACT_VERSION \
+				-DrepositoryId=${repositoryID} -Durl=${repositoryUrl} \
+				-DgeneratePom=true -DupdateReleaseInfo=true
+		else
+			echo "Installing rules artifact into local .m2 repository"
+			mvn --offline org.apache.maven.plugins:maven-install-plugin:2.5.2:install-file \
+				-Dfile=$RULES_JAR -DgeneratePom=true -DupdateReleaseInfo=true
+		fi
+	fi
+
+	update_monitor $CONTROLLER_NAME
+}
+
+
+function update_monitor() {
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+	
+	NAME=$1
+	
+	if [[ -f ${POLICY_HOME}/etc/monitor/monitor.cfg ]]; then
+		if grep -q "^${NAME}=" ${POLICY_HOME}/etc/monitor/monitor.cfg; then
+			echo "OK: updating monitoring entry for ${NAME}"
+			/bin/sed -i.bak \
+				-e "s/^${NAME}=.*/${NAME}=off/g" \
+				${POLICY_HOME}/etc/monitor/monitor.cfg
+		else
+			# make sure file ends with newline
+			lastline=$(tail -n 1 ${POLICY_HOME}/etc/monitor/monitor.cfg; echo x)
+			lastline=${lastline%x}
+			if [ "${lastline: -1}" = $'\n' ]; then
+				echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg"
+			else
+				echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg (with newline)"
+				echo "" >> ${POLICY_HOME}/etc/monitor/monitor.cfg
+			fi
+
+
+			echo "${NAME}=off" >> ${POLICY_HOME}/etc/monitor/monitor.cfg
+		fi
+	else
+		echo "WARNING: ${POLICY_HOME}/etc/monitor/monitor.cfg does not exist. No monitoring enabled."	
+	fi
+}
+
+# Usage: getPomAttributes <pom-file> <attribute> ...
+#
+# This function performs simplistic parsing of a 'pom.xml' file, extracting
+# the specified attributes (e.g. 'groupId', 'artifactId', 'version'). The
+# attributes are returned as environment variables with the associated name.
+
+function getPomAttributes
+{
+	local tab=$'\t'
+	local rval=0
+	local file="$1"
+	local attr
+	local value
+	shift
+	for attr in "$@" ; do
+		# Try to fetch the parameter associated with the 'pom.xml' file.
+		# Initially, the 'parent' element is excluded. If the desired
+		# parameter is not found, the 'parent' element is included in the
+		# second attempt.
+		value=$(sed -n \
+			-e '/<parent>/,/<\/parent>/d' \
+			-e '/<dependencies>/,/<\/dependencies>/d' \
+			-e '/<build>/,/<\/build>/d' \
+			-e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \
+			<"${file}")
+
+		if [[ "${value}" == "" ]] ; then
+			# need to check parent for parameter
+			value=$(sed -n \
+				-e '/<dependencies>/,/<\/dependencies>/d' \
+				-e '/<build>/,/<\/build>/d' \
+				-e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \
+				<"${file}")
+			if [[ "${value}" == "" ]] ; then
+				echo "${file}: Can't determine ${attr}" >&2
+				rval=1
+			fi
+		fi
+		# the following sets an environment variable with the name referred
+		# to by ${attr}
+		read ${attr} <<<"${value}"
+	done
+	return ${rval}
+}
+
+
+# Usage: installPom <pom-file>
+#
+# This function installs a 'pom.xml' file in the local repository
+
+function installPom
+{
+	# need to extract attributes from POM file
+	if getPomAttributes "${1}" artifactId groupId version ; then
+		local repoID repoUrl
+		if [[ "${version}" =~ SNAPSHOT ]] ; then
+			repoID=${snapshotRepoID}
+			repoUrl=${snapshotRepoUrl}
+		else
+			repoID=${releaseRepoID}
+			repoUrl=${releaseRepoUrl}
+		fi
+		echo "${1}: Deploying POM artifact to remote repository"
+		mvn deploy:deploy-file -Dfile="$1" \
+			-Dpackaging=pom -DgeneratePom=false \
+			-DgroupId=${groupId} \
+			-DartifactId=${artifactId} \
+			-Dversion=${version} \
+			-DrepositoryId=${repoID} -Durl=${repoUrl} \
+			-DupdateReleaseInfo=true
+	else
+		echo "${1}: Can't install pom due to missing attributes" >&2
+		return 1
+	fi
+}
+
+# Usage: installJar <jar-file>
+#
+# This function installs a JAR file in the local repository, as well as
+# the 'pom.xml' member it contains.
+
+function installJar
+{
+	local dir=$(mktemp -d)
+	local jar="${1##*/}"
+	cp -p "${1}" "${dir}/${jar}"
+
+	(
+		local rval=0
+		cd "${dir}"
+		# determine name of 'pom' file within JAR
+		local pom=$(jar tf ${jar} META-INF | grep '/pom\.xml$' | head -1)
+		if [[ "${pom}" ]] ; then
+			# extract pom file
+			jar xf ${jar} "${pom}"
+
+			# determine version from pom file
+			if getPomAttributes "${pom}" version ; then
+				local repoID repoUrl
+				if [[ "${version}" =~ SNAPSHOT ]] ; then
+					repoID=${snapshotRepoID}
+					repoUrl=${snapshotRepoUrl}
+				else
+					repoID=${releaseRepoID}
+					repoUrl=${releaseRepoUrl}
+				fi
+				echo "${1}: Deploying JAR artifact to remote repository"
+				mvn deploy:deploy-file \
+					-Dfile=${jar} \
+					-Dversion=${version} \
+					-Dpackaging=jar -DgeneratePom=false -DpomFile=${pom} \
+					-DrepositoryId=${repoID} -Durl=${repoUrl} \
+					-DupdateReleaseInfo=true
+			else
+				echo "${1}: Can't determine version from 'pom.xml'" >&2
+				rval=1
+			fi
+		else
+			echo "${1}: Can't find 'pom.xml'" >&2
+			rval=1
+		fi
+		rm -rf ${dir}
+		return ${rval}
+	)
+}
+
+# Unzip the 'artifacts-*.zip' file, and install all of the associated
+# artifacts into the local repository.
+
+function installArtifacts
+{
+	local file
+	if [[ -f $(echo artifacts-*.zip) ]] ; then
+		# use jar command in case unzip not present on system
+		jar xf artifacts-*.zip
+		for file in artifacts/* ; do
+			case "${file}" in
+				*pom.xml|*.pom) installPom "${file}";;
+				*.jar) installJar "${file}";;
+				*) echo "${file}: Don't know how to install artifact" >&2;;
+			esac
+		done
+	fi
+}
+
+function do_install()
+{
+	if [[ $DEBUG == y ]]; then
+		echo "-- ${FUNCNAME[0]} $@ --"
+		set -x
+	fi
+
+	echo "Starting installation at $(date)"
+	echo
+	
+	COMPONENT_TYPE=base
+	BASE_CONF=base.conf
+	install_base
+	component_preinstall
+
+	COMPONENT_TYPE=policy-management
+	install_controller
+	
+	# install features
+	SOURCE_DIR=$PWD
+	cd $POLICY_HOME
+	jar xf ${SOURCE_DIR}/policy-persistence-*.zip
+	jar xf ${SOURCE_DIR}/policy-healthcheck-*.zip
+	cd ${SOURCE_DIR}
+
+	installArtifacts
+
+	echo
+	echo "Installation complete"
+	echo "Please logoff and login again to update shell environment"
+	
+}
+
+DEBUG=n
+export POLICY_USER=$(/usr/bin/id -un)
+export POLICY_GROUP=$POLICY_USER
+	
+FQDN=$(hostname -f 2> /dev/null)
+if [[ $? != 0 || -z ${FQDN} ]]; then
+	echo "error: cannot determine the FQDN for this host $(hostname)."
+	exit 1
+fi
+
+TIMESTAMP=$(date "+%Y%m%d-%H%M%S")
+LOGFILE=$PWD/install.log.$TIMESTAMP
+
+OPERATION=install
+BASE_CONF=base.conf
+
+do_install 2>&1 | tee $LOGFILE