Integrate AAF

Integrate AAF framework into Clamp.

Issue-ID: CLAMP-103
Change-Id: I2ceeb2a85b8b5674e712b3924a96a2bd6fb71d68
Signed-off-by: xg353y <xg353y@intl.att.com>

1 files changed, 219 insertions, 0 deletions

diff --git a/src/main/resources/application-noaaf.properties b/src/main/resources/application-noaaf.properties
new file mode 100644
index 000000000..197f003a5
--- /dev/null
+++ b/src/main/resources/application-noaaf.properties
@@ -0,0 +1,219 @@
+###

+# ============LICENSE_START=======================================================

+# ONAP CLAMP

+# ================================================================================

+# Copyright (C) 2017-2018 AT&T Intellectual Property. All rights

+#                             reserved.

+# ================================================================================

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+# http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+# ============LICENSE_END============================================

+# ===================================================================

+# ECOMP is a trademark and service mark of AT&T Intellectual Property.

+###

+

+info.build.artifact=@project.artifactId@

+info.build.name=@project.name@

+info.build.description=@project.description@

+info.build.version=@project.version@

+### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).

+### (See below for the parameter 'server.http.port' if you want to have both enabled)

+### To have only HTTP, keep the lines server.ssl.* commented

+### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location

+#server.port=8080

+### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')

+#server.ssl.key-store=file:/tmp/mykey.jks

+#server.ssl.key-store-password=pass

+#server.ssl.key-password=pass

+

+### In order to be user friendly when HTTPS is enabled,

+### you can add another HTTP port that will be automatically redirected to HTTPS

+### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)

+#server.http-to-https-redirection.port=8090

+

+### HTTP Example:

+###--------------

+server.port=8080

+

+

+### HTTP (Redirected to HTTPS) and HTTPS Example:

+### --------------------------------------------

+### server.port=8443           <-- The HTTPS port

+### server.ssl.key-store=file:/tmp/mykey.jks

+### server.ssl.key-store-password=mypass

+### server.ssl.key-password=mypass

+### server.http-to-https-redirection.port=8080

+

+server.contextPath=/

+#Modified engine-rest applicationpath

+spring.profiles.active=clamp-default,clamp-default-user,clamp-sdc-controller

+

+#The max number of active threads in this pool

+server.tomcat.max-threads=200

+#The minimum number of threads always kept alive

+server.tomcat.min-Spare-Threads=25

+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads

+server.tomcat.max-idle-time=60000

+server.tomcat.clientAuth=want

+#Servlet context parameters

+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.

+

+camel.springboot.consumer-template-cache-size=1000

+camel.springboot.producer-template-cache-size=1000

+camel.springboot.jmx-enabled=false

+camel.defaultthreadpool.poolsize=10

+camel.defaultthreadpool.maxpoolsize=20

+camel.defaultthreadpool.maxqueuesize=1000

+camel.defaultthreadpool.keepaliveTime=60

+camel.defaultthreadpool.rejectpolicy=CallerRuns

+#camel.springboot.xmlRoutes = false

+camel.springboot.xmlRoutes=classpath:/clds/camel/*.xml

+#camel.springboot.typeConversion = false

+

+#clds datasource connection details

+spring.datasource.cldsdb.driverClassName=org.mariadb.jdbc.Driver

+spring.datasource.cldsdb.url=jdbc:mariadb:sequential://localhost:${docker.mariadb.port.host}/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3

+spring.datasource.cldsdb.username=clds

+spring.datasource.cldsdb.password=4c90a0b48204383f4283448d23e0b885a47237b2a23588e7c4651604f51c1067

+spring.datasource.cldsdb.validationQuery=SELECT 1

+spring.datasource.cldsdb.validationQueryTimeout=20000

+spring.datasource.cldsdb.validationInterval=30000

+spring.datasource.cldsdb.testWhileIdle = true

+spring.datasource.cldsdb.minIdle = 0

+spring.datasource.cldsdb.initialSize=0

+# Automatically test whether a connection provided is good or not

+spring.datasource.cldsdb.testOnBorrow=true

+spring.datasource.cldsdb.ignoreExceptionOnPreLoad=true

+

+#Async Executor default Parameters

+async.core.pool.size=10

+async.max.pool.size=20

+async.queue.capacity=500

+

+clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties

+clamp.config.files.cldsUsers=classpath:/clds/clds-users.json

+clamp.config.files.globalProperties=classpath:/clds/templates/globalProperties.json

+clamp.config.files.sdcController=classpath:/clds/sdc-controllers-config.json

+

+# Properties for Clamp

+# DCAE request build properties

+#

+clamp.config.dcae.template=classpath:/clds/templates/dcae-template.json

+clamp.config.dcae.decode.service_ids=classpath:/clds/templates/dcae-decode-service_ids.json

+clamp.config.dcae.deployment.template=classpath:/clds/templates/dcae-deployment-template.json

+#

+# SDC request blueprint properties

+#

+clamp.config.sdc.template=classpath:/clds/templates/sdc-template.json

+clamp.config.sdc.decode.service_ids=classpath:/clds/templates/sdc-decode-service_ids.json

+#

+#

+# Configuration Settings for Policy Engine Components

+clamp.config.policy.pdpUrl1=http://policy.api.simpledemo.onap.org:8081/pdp/ , testpdp, alpha123

+clamp.config.policy.pdpUrl2=http://policy.api.simpledemo.onap.org:8081/pdp/ , testpdp, alpha123

+clamp.config.policy.papUrl=http://policy.api.simpledemo.onap.org:8081/pap/ , testpap, alpha123

+clamp.config.policy.notificationType=websocket

+clamp.config.policy.notificationUebServers=localhost

+clamp.config.policy.notificationTopic=

+clamp.config.policy.clientId=myclientid

+# base64 encoding

+

+clamp.config.policy.clientKey=5CE79532B3A2CB4D132FC0C04BF916A7

+#DEVL for development

+#TEST for Test environments

+#PROD for prod environments

+clamp.config.policy.policyEnvironment=TEST

+# General Policy request properties

+#

+clamp.config.policy.onap.name=DCAE

+clamp.config.policy.pdp.group=default

+clamp.config.policy.ms.type=MicroService

+clamp.config.policy.ms.policyNamePrefix=Config_MS_

+clamp.config.policy.op.policyNamePrefix=Config_BRMS_Param_

+clamp.config.policy.base.policyNamePrefix=Config_

+clamp.config.policy.op.type=BRMS_Param

+

+

+# TCA MicroService Policy request build properties

+#

+clamp.config.tca.policyid.prefix=DCAE.Config_

+clamp.config.tca.policy.template=classpath:/clds/templates/tca-policy-template.json

+clamp.config.tca.template=classpath:/clds/templates/tca-template.json

+clamp.config.tca.thresholds.template=classpath:/clds/templates/tca-thresholds-template.json

+

+#

+#

+# Operational Policy request build properties

+#

+clamp.config.op.policyDescription=from clds

+# default

+clamp.config.op.templateName=ClosedLoopvUSP

+clamp.config.op.operationTopic=APPC-CL

+clamp.config.op.notificationTopic=POLICY-CL-MGT

+clamp.config.op.controller=amsterdam

+clamp.config.op.policy.appc=APPC

+# by service: vSCP

+clamp.config.op.templateName.vSCP=ClosedLoopTemplate

+clamp.config.op.controller.vSCP=1607-f5fw

+clamp.config.op.eNodeB.templateName=ClosedLoopControlName

+clamp.config.op.eNodeB.operationTopic=com.onap.sdnr.RanCLRequest-v00

+clamp.config.op.eNodeB.notificationTopic=com.onap-policy.IST-ENODEB-CL

+clamp.config.op.eNodeB.controller=amsterdam

+clamp.config.op.eNodeB.recipe=classpath:/clds/templates/op-eNodeB-recipe.json

+clamp.config.op.eNodeB.timeWindow=35

+clamp.config.op.eNodeB.limit=2

+clamp.config.op.eNodeB.period=10s

+#

+# Sdc service properties

+clamp.config.sdc.catalog.url=http://sdc.api.simpledemo.onap.org:8080/sdc/v1/catalog/

+clamp.config.sdc.hostUrl=http://sdc.api.simpledemo.onap.org:8080

+clamp.config.sdc.serviceUrl=http://sdc.api.simpledemo.onap.org:8080/sdc/v1/catalog/services

+clamp.config.sdc.serviceUsername=clamp

+clamp.config.sdc.servicePassword=b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981

+clamp.config.sdc.artifactLabel=blueprintclampcockpit

+clamp.config.sdc.sdcX-InstanceID=CLAMP

+clamp.config.sdc.artifactType=DCAE_INVENTORY_BLUEPRINT

+clamp.config.sdc.locationArtifactLabel=locationclampcockpit

+clamp.config.sdc.locationArtifactType=DCAE_INVENTORY_JSON

+clamp.config.sdc.InstanceID=X-ECOMP-InstanceID

+clamp.config.sdc.header.requestId = X-ECOMP-RequestID

+#

+clamp.config.sdc.csarFolder = /tmp/sdc-controllers

+clamp.config.sdc.blueprint.parser.mapping = classpath:/clds/blueprint-parser-mapping.json

+#

+clamp.config.ui.location.default=classpath:/clds/templates/ui-location-default.json

+clamp.config.ui.alarm.default=classpath:/clds/templates/ui-alarm-default.json

+#

+# if action.test.override is true, then any action will be marked as test=true (even if incoming action request had test=false); otherwise, test flag will be unchanged on the action request

+clamp.config.action.test.override=false

+# if action.insert.test.event is true, then insert event even if the action is set to test

+clamp.config.action.insert.test.event=false

+clamp.config.clds.service.cache.invalidate.after.seconds=120

+

+#DCAE Inventory Url Properties

+clamp.config.dcae.inventory.url=http://dcae.api.simpledemo.onap.org:8080

+clamp.config.dcae.intentory.retry.interval=10000

+clamp.config.dcae.intentory.retry.limit=3

+

+#DCAE Dispatcher Url Properties

+clamp.config.dcae.dispatcher.url=http://dcae.api.simpledemo.onap.org:8080

+clamp.config.dcae.header.requestId = X-ECOMP-RequestID

+

+clamp.config.security.permission.instance=dev

+

+#AAF related parameters

+clamp.config.security.permission.type.cl=org.onap.clamp.clds.cl

+clamp.config.security.permission.type.cl.manage=org.onap.clamp.clds.cl.manage

+clamp.config.security.permission.type.cl.event=org.onap.clds.cl.event

+clamp.config.security.permission.type.filter.vf=org.onap.clamp.clds.filter.vf

+clamp.config.security.permission.type.template=org.onap.clamp.clds.template

+