aboutsummaryrefslogtreecommitdiffstats
path: root/testsuites/performance/performance-context-metrics/src/test/resources
diff options
context:
space:
mode:
Diffstat (limited to 'testsuites/performance/performance-context-metrics/src/test/resources')
-rw-r--r--testsuites/performance/performance-context-metrics/src/test/resources/hazelcast/hazelcast.xml643
-rw-r--r--testsuites/performance/performance-context-metrics/src/test/resources/infinispan/infinispan.xml42
2 files changed, 685 insertions, 0 deletions
diff --git a/testsuites/performance/performance-context-metrics/src/test/resources/hazelcast/hazelcast.xml b/testsuites/performance/performance-context-metrics/src/test/resources/hazelcast/hazelcast.xml
new file mode 100644
index 000000000..84da4951e
--- /dev/null
+++ b/testsuites/performance/performance-context-metrics/src/test/resources/hazelcast/hazelcast.xml
@@ -0,0 +1,643 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+ ============LICENSE_START=======================================================
+ Copyright (C) 2016-2018 Ericsson. All rights reserved.
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ SPDX-License-Identifier: Apache-2.0
+ ============LICENSE_END=========================================================
+-->
+
+<hazelcast xmlns="http://www.hazelcast.com/schema/config"
+ xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+ <group>
+ <name>HazelcastGroup3.0EVAL</name>
+ <password>password3.0EVAL</password>
+ </group>
+ <network>
+ <port auto-increment="true">5706</port>
+ <join>
+ <multicast enabled="false">
+ <multicast-group>224.2.2.10</multicast-group>
+ <multicast-port>54327</multicast-port>
+ </multicast>
+ <tcp-ip enabled="true">
+ <members>10.0.0.0</members>
+ <!-- members>192.168.219.141</members-->
+ </tcp-ip>
+ </join>
+ <interfaces enabled="false">
+ <!-- This value will allow hazelcast to run locally from the IDE -->
+ <interface>127.0.0.*</interface>
+ </interfaces>
+ </network>
+ <properties>
+ <property name="hazelcast.icmp.enabled">true</property>
+ <property name="hazelcast.logging.type">slf4j</property>
+ <!-- disable the hazelcast shutdown hook - prefer to control the shutdown
+ in code -->
+ <property name="hazelcast.shutdownhook.enabled">false</property>
+ <property name="hazelcast.graceful.shutdown.max.wait">60</property>
+ </properties>
+ <executor-service>
+ <pool-size>16</pool-size>
+ </executor-service>
+ <queue name="default">
+ <!-- Maximum size of the queue. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>100000</max-size>
+ <!-- Maximum number of seconds for each item to stay in the queue. Items
+ that are not consumed in <time-to-live-seconds> will automatically get evicted
+ from the queue. Any integer between 0 and Integer.MAX_VALUE. 0 means infinite.
+ Default is 0. -->
+ </queue>
+ <map name="default">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>0</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>25</eviction-percentage>
+ </map>
+ <map name="L_ATTACH-Map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>LRU</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>5</eviction-percentage>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.loading.service.buffer.L_ATTACHLoader</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>60000</write-delay-seconds> </map-store> -->
+
+
+ </map>
+ <map name="CTUM-Map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>LRU</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>5</eviction-percentage>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>7200</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.loading.service.buffer.CTUMLoader</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>3600</write-delay-seconds> </map-store> -->
+
+ </map>
+ <map name="L_HANDOVER-Map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>LRU</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>5</eviction-percentage>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>3600</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.base.publishing.hazelcast.L_ATTACHStore</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+ </map>
+
+ <map name="L_SERVICE_REQUEST-Map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>LRU</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>5</eviction-percentage>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>7200</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.base.publishing.hazelcast.L_HandoverStore</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+ </map>
+ <map name="CommonCache">
+
+
+ <!-- Number of async-backups. If 1 is set as the backup-count for example,
+ then all entries of the map will be copied to another JVM for fail-safety.
+ Valid numbers are 0 (no backup), 1, 2, 3. -->
+ <async-backup-count>1</async-backup-count>
+
+ <!-- Can we read the local backup entries? Default value is false for strong
+ consistency. Being able to read backup data will give you greater performance. -->
+ <read-backup-data>true</read-backup-data>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>LRU</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>3000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>5</eviction-percentage>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>7200</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.base.publishing.hazelcast.L_HandoverStore</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+ </map>
+
+
+ <map name="Topology-Map">
+
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>2</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>10000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.loading.service.buffer.TopologyCacheLoader</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+
+ </map>
+ <map name="Protocol-cause-code-Map">
+ <near-cache>
+ <!-- Maximum number of seconds for each entry to stay in the near cache.
+ Entries that are older than <time-to-live-seconds> will get automatically
+ evicted from the near cache. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+
+ <!-- Maximum number of seconds each entry can stay in the near cache as
+ untouched (not-read). Entries that are not read (touched) more than <max-idle-seconds>
+ value will get removed from the near cache. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-idle-seconds>0</max-idle-seconds>
+
+ <!-- Valid values are: NONE (no extra eviction, <time-to-live-seconds>
+ may still apply), LRU (Least Recently Used), LFU (Least Frequently Used).
+ NONE is the default. Regardless of the eviction policy used, <time-to-live-seconds>
+ will still apply. -->
+ <eviction-policy>NONE</eviction-policy>
+
+ <!-- Maximum size of the near cache. When max size is reached, cache is
+ evicted based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>2000</max-size>
+
+ <!-- Should the cached entries get evicted if the entries are changed
+ (updated or removed). true of false. Default is true. -->
+ <invalidate-on-change>true</invalidate-on-change>
+
+ </near-cache>
+
+
+
+ </map>
+ <map name="SessionId_Map">
+
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>10000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>60</time-to-live-seconds>
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.loading.service.buffer.TopologyCacheLoader</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+ </map>
+ <map name="gpeh-reasons-Map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>2</backup-count>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+ <near-cache>
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used),
+ LFU (Least Frequently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000</max-size>
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+ </near-cache>
+ </map>
+ <map name="tac-imei-Map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>2</backup-count>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+ <near-cache>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used),
+ LFU (Least Frequently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>10000</max-size>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+ </near-cache>
+ </map>
+
+ <map name="CORE-DATA-Map">
+
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>2</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>10000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.loading.service.buffer.TopologyCacheLoader</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+
+ </map>
+ <map name="IMSI-APN-Map">
+
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>2</backup-count>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>10000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.loading.service.buffer.TopologyCacheLoader</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+
+ </map>
+ <map name="CommonDataCache">
+
+
+ <!-- Number of async-backups. If 1 is set as the backup-count for example,
+ then all entries of the map will be copied to another JVM for fail-safety.
+ Valid numbers are 0 (no backup), 1, 2, 3. -->
+ <async-backup-count>1</async-backup-count>
+
+ <!-- Can we read the local backup entries? Default value is false for strong
+ consistency. Being able to read backup data will give you greater performance. -->
+ <read-backup-data>true</read-backup-data>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>LRU</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>3000000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>5</eviction-percentage>
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>7200</time-to-live-seconds>
+
+ <!-- <map-store enabled="true"> Name of the class implementing MapLoader
+ and/or MapStore. The class should implement at least of these interfaces
+ and contain no-argument constructor. Note that the inner classes are not
+ supported. <class-name>com.ericsson.xstream.base.publishing.hazelcast.L_HandoverStore</class-name>
+ Number of seconds to delay to call the MapStore.store(key, value). If the
+ value is zero then it is write-through so MapStore.store(key, value) will
+ be called as soon as the entry is updated. Otherwise it is write-behind so
+ updates will be stored after write-delay-seconds value by calling Hazelcast.storeAll(map).
+ Default value is 0. <write-delay-seconds>5</write-delay-seconds> </map-store> -->
+
+
+ </map>
+
+
+ <queue name="raw-distributer-queue">
+ <!-- Maximum size of the queue. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>100000</max-size>
+ </queue>
+ <map name="queue-map">
+
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>0</backup-count>
+
+ </map>
+
+ <map name="radio-correlation-config-Map">
+ <backup-count>2</backup-count>
+ <eviction-policy>NONE</eviction-policy>
+ <max-size>50</max-size>
+ <eviction-percentage>0</eviction-percentage>
+ <time-to-live-seconds>0</time-to-live-seconds>
+ </map>
+
+ <map name="xstream-configuration-map">
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>0</backup-count>
+ <time-to-live-seconds>100000</time-to-live-seconds>
+ </map>
+
+ <map name="TOPIC-TASK-MAP">
+
+ <async-backup-count>3</async-backup-count>
+
+ <read-backup-data>true</read-backup-data>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+ </map>
+ <map name="TOPIC-REGISTRY">
+
+ <async-backup-count>3</async-backup-count>
+
+ <read-backup-data>true</read-backup-data>
+ <!-- Valid values are: NONE (no eviction), LRU (Least Recently Used), LFU
+ (Least Frequiently Used). NONE is the default. -->
+ <eviction-policy>NONE</eviction-policy>
+ <!-- Maximum size of the map. When max size is reached, map is evicted
+ based on the policy defined. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>1000</max-size>
+ <!-- When max. size is reached, specified percentage of the map will be
+ evicted. Any integer between 0 and 100. If 25 is set for example, 25% of
+ the entries will get evicted. -->
+ <eviction-percentage>0</eviction-percentage>
+
+
+
+ <!-- Maximum number of seconds for each entry to stay in the map. Entries
+ that are older than <time-to-live-seconds> and not updated for <time-to-live-seconds>
+ will get automatically evicted from the map. Any integer between 0 and Integer.MAX_VALUE.
+ 0 means infinite. Default is 0. -->
+ <time-to-live-seconds>0</time-to-live-seconds>
+ </map>
+ <queue name="Pooled-Topic-Request-Queue">
+ <!-- Maximum size of the queue.Any integer between 0 and Integer.MAX_VALUE.
+ 0 means Integer.MAX_VALUE. Default is 0. -->
+ <max-size>100000</max-size>
+ </queue>
+ <map name="Pooled-Topic-Request-Queue-Backup-map">
+
+ <!-- Number of backups. If 1 is set as the backup-count for example, then
+ all entries of the map will be copied to another JVM for fail-safety. Valid
+ numbers are 0 (no backup), 1, 2, 3. -->
+ <backup-count>1</backup-count>
+ <eviction-policy>NONE</eviction-policy>
+ <time-to-live-seconds>0</time-to-live-seconds>
+ </map>
+
+</hazelcast>
diff --git a/testsuites/performance/performance-context-metrics/src/test/resources/infinispan/infinispan.xml b/testsuites/performance/performance-context-metrics/src/test/resources/infinispan/infinispan.xml
new file mode 100644
index 000000000..a8541333e
--- /dev/null
+++ b/testsuites/performance/performance-context-metrics/src/test/resources/infinispan/infinispan.xml
@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+ ============LICENSE_START=======================================================
+ Copyright (C) 2016-2018 Ericsson. All rights reserved.
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ SPDX-License-Identifier: Apache-2.0
+ ============LICENSE_END=========================================================
+-->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<infinispan xmlns="urn:infinispan:config:8.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:infinispan:config:8.0 http://infinispan.org/schemas/infinispan-config-8.0.xsd">
+ <jgroups>
+ <stack-file name="external-file" path="default-configs/default-jgroups-tcp.xml" />
+ </jgroups>
+
+ <cache-container name="ApexCacheContainer" default-cache="TestContext_0.0.1">
+ <transport cluster="apexCluster" stack="external-file" />
+ <jmx />
+ <replicated-cache name="LargeContextMap_0.0.1" mode="SYNC" statistics="true">
+ <state-transfer enabled="true" />
+ </replicated-cache>
+ <replicated-cache name="LongSameTypeContextMap_0.0.1" mode="SYNC" statistics="true">
+ <state-transfer enabled="true" />
+ </replicated-cache>
+ <replicated-cache name="TestContext_0.0.1" mode="SYNC">
+ <state-transfer enabled="true" />
+ </replicated-cache>
+ </cache-container>
+</infinispan>