summaryrefslogtreecommitdiffstats
path: root/src/site-docs/adoc/fragments/install-guide/verify.adoc
diff options
context:
space:
mode:
authorramverma <ram.krishna.verma@ericsson.com>2018-07-31 18:25:39 +0100
committerramverma <ram.krishna.verma@ericsson.com>2018-07-31 18:27:31 +0100
commitaf74a6270d6ab6badf04a97495a6ef8ccded9b4b (patch)
tree2c7a536e54207a0870ca2008ce457a64de917ab9 /src/site-docs/adoc/fragments/install-guide/verify.adoc
parent9e318f20f2e64970bf3c2e3a5532c516231a6f8a (diff)
Adding first set of apex-pdp document changes
Adding document changes for auth, context, core, model, services & the main apex-pdp module. Change-Id: Id0d026baa258f1dc6998978f9911f3c4a73b5b3b Issue-ID: POLICY-867 Signed-off-by: ramverma <ram.krishna.verma@ericsson.com>
Diffstat (limited to 'src/site-docs/adoc/fragments/install-guide/verify.adoc')
-rw-r--r--src/site-docs/adoc/fragments/install-guide/verify.adoc180
1 files changed, 180 insertions, 0 deletions
diff --git a/src/site-docs/adoc/fragments/install-guide/verify.adoc b/src/site-docs/adoc/fragments/install-guide/verify.adoc
new file mode 100644
index 000000000..782c2723e
--- /dev/null
+++ b/src/site-docs/adoc/fragments/install-guide/verify.adoc
@@ -0,0 +1,180 @@
+//
+// ============LICENSE_START=======================================================
+// Copyright (C) 2016-2018 Ericsson. All rights reserved.
+// ================================================================================
+// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
+// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
+//
+// SPDX-License-Identifier: CC-BY-4.0
+// ============LICENSE_END=========================================================
+//
+// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
+//
+
+== Verify the APEX Installation
+When APEX is installed and all settings are realized, the installation can be verified.
+
+=== Verify a Minimal Installation
+The minimal installation does not come with any configuration or policy model.
+It is therefore not possible to test all APEX features, or an engine running with policies.
+
+However, one can verify that the engine starts up to the point where it tries to load a configuration.
+
+On Unix (or Cygwin) start the engine using `$APEX_HOME/bin/apexEngine.sh`.
+The engine will fail to fully start.
+However, if the output looks similar to the following line, the APEX installation is realized.
+
+[source%nowrap,sh,numbered]
+----
+Starting Apex service with parameters [] . . .
+start of Apex service failed: Apex configuration file was not specified as an argument
+2017-07-28 13:18:44,266 Apex [main] ERROR c.e.a.service.engine.main.ApexMain - start of Apex service failed:
+----
+
+On Windows start the engine using `%APEX_HOME%\bin\apexEngine.bat`.
+The engine will fail to fully start.
+However, if the output looks similar to the following line, the APEX installation is realized.
+
+[source%nowrap,bat,numbered]
+----
+Starting Apex service with parameters [] . . .
+start of Apex service failed: Apex configuration file was not specified as an argument
+2017-07-28 13:18:44,266 Apex [main] ERROR c.e.a.service.engine.main.ApexMain - start of Apex service failed:
+----
+
+
+=== Verify a Full Installation - run an Example
+A full APEX installation comes with several examples.
+Here, we can fully verify the installation by running one of the examples.
+
+We use the example called _SampleDomain_ and configure the engine to use standard in and standard out for events.
+Run the engine with the provided configuration.
+Note: Cygwin executes scripts as Unix scripts but runs Java as a Windows application, thus the configuration file must be given as a Windows path.
+
+[source%nowrap,sh,numbered,subs="attributes+"]
+----
+# $APEX_HOME/bin/apexEngine.sh -c $APEX_HOME/examples/config/SampleDomain/Stdin2StdoutJsonEventJava.json # <1>
+# $APEX_HOME/bin/apexEngine.sh -c C:/apex/apex-full-{release-version}/examples/config/SampleDomain/Stdin2StdoutJsonEventJava.json # <2>
+>%APEX_HOME%\bin\apexEngine.bat -c %APEX_HOME%\examples\config\SampleDomain\Stdin2StdoutJsonEventJava.json @@ <3>
+----
+<1> UNIX
+<2> Cygwin
+<3> Windows
+
+
+The engine should start successfully.
+Assuming the logging levels are not change (default level is `info`), the output should look similar to this (last few lines)
+
+[source%nowrap,sh,numbered]
+----
+2017-07-28 13:20:54,673 Apex [main] INFO c.e.a.s.engine.runtime.EngineService - engine model SamplePolicyModelJAVA:0.0.1 added to the engine-AxArtifactKey:(name=MyApexEngine-3,version=0.0.1)
+2017-07-28 13:20:54,675 Apex [Apex-apex-engine-service-0:0] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-0,version=0.0.1) processing ...
+2017-07-28 13:20:54,677 Apex [Apex-apex-engine-service-0:1] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-1,version=0.0.1) processing ...
+2017-07-28 13:20:54,677 Apex [Apex-apex-engine-service-0:2] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-2,version=0.0.1) processing ...
+2017-07-28 13:20:54,677 Apex [Apex-apex-engine-service-0:3] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-3,version=0.0.1) processing ...
+2017-07-28 13:20:54,680 Apex [main] INFO c.e.a.s.e.r.impl.EngineServiceImpl - Added the action listener to the engine
+Started Apex service
+----
+
+Important are the last two line, stating that APEX has added the final action listener to the engine and that the engine is started.
+
+The engine is configured to read events from standard input and write produced events to standard output.
+The policy model is a very simple policy.
+
+The following table shows an input event in the left column and an output event in the right column.
+Past the input event into the console where APEX is running, and the output event should appear in the console.
+Pasting the input event multiple times will produce output events with different values.
+
+[width="100%",options="header",cols="5a,5a"]
+|====================
+| Input Event | Example Output Event
+|
+[source%nowrap,json,numbered]
+----
+{
+ "nameSpace": "org.onap.policy.apex.sample.events",
+ "name": "Event0000",
+ "version": "0.0.1",
+ "source": "test",
+ "target": "apex",
+ "TestSlogan": "Test slogan for External Event0",
+ "TestMatchCase": 0,
+ "TestTimestamp": 1469781869269,
+ "TestTemperature": 9080.866
+}
+----
+|
+[source%nowrap,json,numbered]
+----
+{
+ "nameSpace" : "org.onap.policy.apex.sample.events",
+ "name" : "Event0004",
+ "version" : "0.0.1",
+ "source" : "Act",
+ "target" : "Outside",
+ "TestActCaseSelected" : 1,
+ "TestActStateTime" : 1499280954832,
+ "TestTemperature" : 9080.866,
+ "TestDecideCaseSelected" : 2,
+ "TestMatchCaseSelected" : 2,
+ "TestTimestamp" : 1469781869269,
+ "TestDecideStateTime" : 1499280954831,
+ "TestMatchCase" : 0,
+ "TestSlogan" : "Test slogan for External Event0",
+ "TestEstablishCaseSelected" : 1,
+ "TestEstablishStateTime" : 1499280954831,
+ "TestMatchStateTime" : 1499280954828
+}
+----
+|====================
+
+Terminate APEX by simply using `CTRL+C` in the console.
+
+
+=== Verify a Full Installation - REST Editor
+APEX has a REST application for viewing policy models.
+The application can also be used to create new policy models close to the engine native policy language.
+Start the REST editor as follows.
+
+[source%nowrap,sh,numbered]
+----
+# $APEX_HOME/bin/apexApps.sh rest-editor
+----
+
+[source%nowrap,bat,numbered]
+----
+>%APEX_HOME%\bin\apexApps.bat rest-editor
+----
+
+The script will start a simple web server (link:https://javaee.github.io/grizzly/[Grizzly]) and deploy a `war` web archive in it.
+Once the editor is started, it will be available on `localhost:18988`.
+The last few line of the messages should be:
+
+[source%nowrap,sh,numbered]
+----
+Apex Editor REST endpoint (ApexEditorMain: Config=[ApexEditorParameters: URI=http://localhost:18988/apex/, TTL=-1sec], State=READY) starting at http://localhost:18988/apex/ . . .
+Jul 28, 2017 1:22:15 PM org.glassfish.grizzly.http.server.NetworkListener start
+INFO: Started listener bound to [localhost:18988]
+Jul 28, 2017 1:22:15 PM org.glassfish.grizzly.http.server.HttpServer start
+INFO: [HttpServer] Started.
+Apex Editor REST endpoint (ApexEditorMain: Config=[ApexEditorParameters: URI=http://localhost:18988/apex/, TTL=-1sec], State=RUNNING) started at http://localhost:18988/apex/
+----
+
+Now open a browser (Firefox, Chrome, Opera, Internet Explorer) and use the URL `http://localhost:18988/`.
+This will connect the browser to the started REST editor.
+The start screen should be as follows.
+
+.REST Editor Start Screen
+image::install-guide/rest-start.png[REST Editor Start Screen]
+
+Now load a policy model by clicking the menu `File` and then `Open`.
+In the opened dialog, go to the directory where APEX is installed, then `examples`, `models`, `SampleDomain`, and there select the file `SamplePolicyModelJAVA.json`.
+This will load the policy model used to verify the policy engine (see above).
+Once loaded, the screen should look as follows.
+
+.REST Editor with loaded SampleDomain Policy Model
+image::install-guide/rest-loaded.png[REST Editor with loaded SampleDomain Policy Model]
+
+Now you can use the REST editor.
+To finish this verification, simply terminate your browser (or the tab), and then use `CTRL+C` in the console where you started the REST editor.
+