Fix package of apex examples and documents

The examples are not packaged correctly in the apex build
and the client wars are missing

The links and location of the documents are corrected.

Some POM duplicate dependencies removed.

Javadoc warnings removed.

Issue-ID: POLICY-867
Change-Id: I555c29191c61c0a9887365d95005dbc584eddf04
Signed-off-by: liamfallon <liam.fallon@ericsson.com>

1 files changed, 57 insertions, 49 deletions

diff --git a/src/site-docs/adoc/fragments/install-guide/verify.adoc b/src/site-docs/adoc/fragments/install-guide/verify.adoc
index 782c2723e..6774a8489 100644
--- a/src/site-docs/adoc/fragments/install-guide/verify.adoc
+++ b/src/site-docs/adoc/fragments/install-guide/verify.adoc
@@ -14,13 +14,10 @@
 == Verify the APEX Installation
 When APEX is installed and all settings are realized, the installation can be verified.
 
-=== Verify a Minimal Installation
-The minimal installation does not come with any configuration or policy model.
-It is therefore not possible to test all APEX features, or an engine running with policies.
-
-However, one can verify that the engine starts up to the point where it tries to load a configuration.
-
+=== Verify Installation - run Engine
+A simple verification of an APEX installation can be done by simply starting the APEX engine without any configuration.
 On Unix (or Cygwin) start the engine using `$APEX_HOME/bin/apexEngine.sh`.
+On Windows start the engine using `%APEX_HOME%\bin\apexEngine.bat`.
 The engine will fail to fully start.
 However, if the output looks similar to the following line, the APEX installation is realized.
 
@@ -28,22 +25,26 @@ However, if the output looks similar to the following line, the APEX installatio
 ----
 Starting Apex service with parameters [] . . .
 start of Apex service failed: Apex configuration file was not specified as an argument
-2017-07-28 13:18:44,266 Apex [main] ERROR c.e.a.service.engine.main.ApexMain - start of Apex service failed:
-----
+2018-09-03 13:11:33,914 Apex [main] ERROR o.o.p.a.service.engine.main.ApexMain - start of Apex service failed
+org.onap.policy.apex.model.basicmodel.concepts.ApexException: Apex configuration file was not specified as an argument
+        at org.onap.policy.apex.service.engine.main.ApexCommandLineArguments.validateReadableFile(ApexCommandLineArguments.java:267)
+        at org.onap.policy.apex.service.engine.main.ApexCommandLineArguments.validate(ApexCommandLineArguments.java:161)
+        at org.onap.policy.apex.service.engine.main.ApexMain.<init>(ApexMain.java:68)
+        at org.onap.policy.apex.service.engine.main.ApexMain.main(ApexMain.java:165)
+usage: org.onap.policy.apex.service.engine.main.ApexMain [options...]
+options
+-c,--config-file <CONFIG_FILE>the full path to the configuration file to use, the configuration file must be a Json file
+                              containing the Apex configuration parameters
+-h,--help                     outputs the usage of this command
+-m,--model-file <MODEL_FILE>  the full path to the model file to use, if set it overrides the model file set in the
+                              configuration file
+-v,--version                  outputs the version of Apex
 
-On Windows start the engine using `%APEX_HOME%\bin\apexEngine.bat`.
-The engine will fail to fully start.
-However, if the output looks similar to the following line, the APEX installation is realized.
-
-[source%nowrap,bat,numbered]
-----
-Starting Apex service with parameters [] . . .
-start of Apex service failed: Apex configuration file was not specified as an argument
-2017-07-28 13:18:44,266 Apex [main] ERROR c.e.a.service.engine.main.ApexMain - start of Apex service failed:
 ----
 
 
-=== Verify a Full Installation - run an Example
+
+=== Verify Installation - run an Example
 A full APEX installation comes with several examples.
 Here, we can fully verify the installation by running one of the examples.
 
@@ -55,7 +56,7 @@ Note: Cygwin executes scripts as Unix scripts but runs Java as a Windows applica
 ----
 # $APEX_HOME/bin/apexEngine.sh -c $APEX_HOME/examples/config/SampleDomain/Stdin2StdoutJsonEventJava.json # <1>
 # $APEX_HOME/bin/apexEngine.sh -c C:/apex/apex-full-{release-version}/examples/config/SampleDomain/Stdin2StdoutJsonEventJava.json # <2>
->%APEX_HOME%\bin\apexEngine.bat -c %APEX_HOME%\examples\config\SampleDomain\Stdin2StdoutJsonEventJava.json @@ <3>
+>%APEX_HOME%\bin\apexEngine.bat -c %APEX_HOME%\examples\config\SampleDomain\Stdin2StdoutJsonEventJava.json :: <3>
 ----
 <1> UNIX
 <2> Cygwin
@@ -67,12 +68,19 @@ Assuming the logging levels are not change (default level is `info`), the output
 
 [source%nowrap,sh,numbered]
 ----
-2017-07-28 13:20:54,673 Apex [main] INFO c.e.a.s.engine.runtime.EngineService - engine model SamplePolicyModelJAVA:0.0.1 added to the engine-AxArtifactKey:(name=MyApexEngine-3,version=0.0.1)
-2017-07-28 13:20:54,675 Apex [Apex-apex-engine-service-0:0] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-0,version=0.0.1) processing ...
-2017-07-28 13:20:54,677 Apex [Apex-apex-engine-service-0:1] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-1,version=0.0.1) processing ...
-2017-07-28 13:20:54,677 Apex [Apex-apex-engine-service-0:2] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-2,version=0.0.1) processing ...
-2017-07-28 13:20:54,677 Apex [Apex-apex-engine-service-0:3] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=MyApexEngine-3,version=0.0.1) processing ...
-2017-07-28 13:20:54,680 Apex [main] INFO c.e.a.s.e.r.impl.EngineServiceImpl - Added the action listener to the engine
+Starting Apex service with parameters [-c, v:/dev/ericsson/apex/onap/apex-pdp/packages/apex-pdp-package-full/target/install_hierarchy/examples/config/SampleDomain/Stdin2StdoutJsonEventJava.json] . . .
+2018-09-05 15:16:42,800 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Created apex engine MyApexEngine-0:0.0.1 .
+2018-09-05 15:16:42,804 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Created apex engine MyApexEngine-1:0.0.1 .
+2018-09-05 15:16:42,804 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Created apex engine MyApexEngine-2:0.0.1 .
+2018-09-05 15:16:42,805 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Created apex engine MyApexEngine-3:0.0.1 .
+2018-09-05 15:16:42,805 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - APEX service created.
+2018-09-05 15:16:43,962 Apex [main] INFO o.o.p.a.s.e.e.EngDepMessagingService - engine<-->deployment messaging starting . . .
+2018-09-05 15:16:43,963 Apex [main] INFO o.o.p.a.s.e.e.EngDepMessagingService - engine<-->deployment messaging started
+2018-09-05 15:16:44,987 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Registering apex model on engine MyApexEngine-0:0.0.1
+2018-09-05 15:16:45,112 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Registering apex model on engine MyApexEngine-1:0.0.1
+2018-09-05 15:16:45,113 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Registering apex model on engine MyApexEngine-2:0.0.1
+2018-09-05 15:16:45,113 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Registering apex model on engine MyApexEngine-3:0.0.1
+2018-09-05 15:16:45,120 Apex [main] INFO o.o.p.a.s.e.r.impl.EngineServiceImpl - Added the action listener to the engine
 Started Apex service
 ----
 
@@ -107,23 +115,23 @@ Pasting the input event multiple times will produce output events with different
 [source%nowrap,json,numbered]
 ----
 {
-  "nameSpace" : "org.onap.policy.apex.sample.events",
-  "name" : "Event0004",
-  "version" : "0.0.1",
-  "source" : "Act",
-  "target" : "Outside",
-  "TestActCaseSelected" : 1,
-  "TestActStateTime" : 1499280954832,
-  "TestTemperature" : 9080.866,
-  "TestDecideCaseSelected" : 2,
-  "TestMatchCaseSelected" : 2,
-  "TestTimestamp" : 1469781869269,
-  "TestDecideStateTime" : 1499280954831,
-  "TestMatchCase" : 0,
-  "TestSlogan" : "Test slogan for External Event0",
-  "TestEstablishCaseSelected" : 1,
-  "TestEstablishStateTime" : 1499280954831,
-  "TestMatchStateTime" : 1499280954828
+  "name": "Event0004",
+  "version": "0.0.1",
+  "nameSpace": "org.onap.policy.apex.sample.events",
+  "source": "Act",
+  "target": "Outside",
+  "TestActCaseSelected": 2,
+  "TestActStateTime": 1536157104627,
+  "TestDecideCaseSelected": 0,
+  "TestDecideStateTime": 1536157104625,
+  "TestEstablishCaseSelected": 0,
+  "TestEstablishStateTime": 1536157104623,
+  "TestMatchCase": 0,
+  "TestMatchCaseSelected": 1,
+  "TestMatchStateTime": 1536157104620,
+  "TestSlogan": "Test slogan for External Event0",
+  "TestTemperature": 9080.866,
+  "TestTimestamp": 1469781869269
 }
 ----
 |====================
@@ -147,20 +155,20 @@ Start the REST editor as follows.
 ----
 
 The script will start a simple web server (link:https://javaee.github.io/grizzly/[Grizzly]) and deploy a `war` web archive in it.
-Once the editor is started, it will be available on `localhost:18988`.
+Once the editor is started, it will be available on `localhost:18989`.
 The last few line of the messages should be:
 
 [source%nowrap,sh,numbered]
 ----
-Apex Editor REST endpoint (ApexEditorMain: Config=[ApexEditorParameters: URI=http://localhost:18988/apex/, TTL=-1sec], State=READY) starting at http://localhost:18988/apex/ . . .
-Jul 28, 2017 1:22:15 PM org.glassfish.grizzly.http.server.NetworkListener start
-INFO: Started listener bound to [localhost:18988]
-Jul 28, 2017 1:22:15 PM org.glassfish.grizzly.http.server.HttpServer start
+Apex Editor REST endpoint (ApexEditorMain: Config=[ApexEditorParameters: URI=http://localhost:18989/apexservices/, TTL=-1sec], State=READY) starting at http://localhost:18989/apexservices/ . . .
+Sep 05, 2018 10:35:57 PM org.glassfish.grizzly.http.server.NetworkListener start
+INFO: Started listener bound to [localhost:18989]
+Sep 05, 2018 10:35:57 PM org.glassfish.grizzly.http.server.HttpServer start
 INFO: [HttpServer] Started.
-Apex Editor REST endpoint (ApexEditorMain: Config=[ApexEditorParameters: URI=http://localhost:18988/apex/, TTL=-1sec], State=RUNNING) started at http://localhost:18988/apex/
+Apex Editor REST endpoint (ApexEditorMain: Config=[ApexEditorParameters: URI=http://localhost:18989/apexservices/, TTL=-1sec], State=RUNNING) started at http://localhost:18989/apexservices/
 ----
 
-Now open a browser (Firefox, Chrome, Opera, Internet Explorer) and use the URL `http://localhost:18988/`.
+Now open a browser (Firefox, Chrome, Opera, Internet Explorer) and use the URL `http://localhost:18989/`.
 This will connect the browser to the started REST editor.
 The start screen should be as follows.