Remove apex asciidoc documents

Apex documentation has now all been ported to use the ONAP recommended
rst format. This review removes the old asciidoc documents.

Issue-ID: POLICY-2824
Change-Id: I562bd344cb7d6ff36e7d54bdb8f95e3b656468f8
Signed-off-by: liamfallon <liam.fallon@est.tech>

8 files changed, 0 insertions, 280 deletions

diff --git a/src/site-docs/adoc/fragments/howto-websockets/demo-00.adoc b/src/site-docs/adoc/fragments/howto-websockets/demo-00.adoc
deleted file mode 100644
index a9f72a80c..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/demo-00.adoc
+++ /dev/null
@@ -1,24 +0,0 @@
-//
-// ============LICENSE_START=======================================================
-//  Copyright (C) 2016-2018 Ericsson. All rights reserved.
-// ================================================================================
-// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
-// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
-// 
-// SPDX-License-Identifier: CC-BY-4.0
-// ============LICENSE_END=========================================================
-//
-// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
-//
-
-== Demo with VPN Policy Model
-
-We assume that you have an APEX installation using the full package, i.e. APEX with all examples, of version `0.5.6` or higher.
-We will use the VPN policy from the APEX examples here.
-
-Now, have the following ready to start the demo:
-
-- 3 terminals on the host where APEX is running (we need 1 for APEX and 1 for each client)
-- the events in the file `$APEX_HOME/examples/events/VPN/SetupEvents.json` open in an editor (we need to send those events to APEX)
-- the events in the file `$APEX_HOME/examples/events/VPN/Link09Events.json` open in an editor (we need to send those events to APEX)
-
diff --git a/src/site-docs/adoc/fragments/howto-websockets/demo-01-vpn-wsconfig.adoc b/src/site-docs/adoc/fragments/howto-websockets/demo-01-vpn-wsconfig.adoc
deleted file mode 100644
index f1d4d7327..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/demo-01-vpn-wsconfig.adoc
+++ /dev/null
@@ -1,69 +0,0 @@
-//
-// ============LICENSE_START=======================================================
-//  Copyright (C) 2016-2018 Ericsson. All rights reserved.
-// ================================================================================
-// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
-// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
-// 
-// SPDX-License-Identifier: CC-BY-4.0
-// ============LICENSE_END=========================================================
-//
-// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
-//
-
-=== A Websocket Configuration for the VPN Domain
-
-Create a new APEX configuration using the VPN policy model and configuring APEX as discussed above for Websockets.
-Copy the following configuration into `$APEX_HOME/examples/config/VPN/Ws2WsServerAvroContextJsonEvent.json` (for Windows use `%APEX_HOME%\examples\config\VPN\Ws2WsServerAvroContextJsonEvent.json`):
-
-[source%nowrap,json,numbered,subs="attributes+"]
-----
-{
-  "engineServiceParameters" : {
-    "name"          : "VPNApexEngine",
-    "version"        : "0.0.1",
-    "id"             :  45,
-    "instanceCount"  : 1,
-    "deploymentPort" : 12345,
-    "policyModelFileName" : "examples/models/VPN/VPNPolicyModelAvro.json",
-    "engineParameters"    : {
-      "executorParameters" : {
-        "MVEL" : {
-          "parameterClassName" : "org.onap.policy.apex.plugins.executor.mvel.MVELExecutorParameters"
-        }
-      },
-      "contextParameters" : {
-        "parameterClassName" : "org.onap.policy.apex.context.parameters.ContextParameters",
-        "schemaParameters":{
-          "Avro":{
-            "parameterClassName" : "org.onap.policy.apex.plugins.context.schema.avro.AvroSchemaHelperParameters"
-          }
-        }
-      }
-    }
-  },
-  "producerCarrierTechnologyParameters" : {
-    "carrierTechnology" : "WEBSOCKET",
-    "parameterClassName" : "org.onap.policy.apex.plugins.event.carrier.websocket.WEBSOCKETCarrierTechnologyParameters",
-    "parameters" : {
-      "wsClient" : false,
-      "port"     : 42452
-    }
-  },
-  "producerEventProtocolParameters" : {
-    "eventProtocol" : "JSON"
-  },
-  "consumerCarrierTechnologyParameters" : {
-    "carrierTechnology" : "WEBSOCKET",
-    "parameterClassName" : "org.onap.policy.apex.plugins.event.carrier.websocket.WEBSOCKETCarrierTechnologyParameters",
-    "parameters" : {
-      "wsClient" : false,
-      "port"     : 42450
-    }
-  },
-  "consumerEventProtocolParameters" : {
-    "eventProtocol" : "JSON"
-  }
-}
-----
-
diff --git a/src/site-docs/adoc/fragments/howto-websockets/demo-02-start-engine.adoc b/src/site-docs/adoc/fragments/howto-websockets/demo-02-start-engine.adoc
deleted file mode 100644
index 58d3e1fe8..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/demo-02-start-engine.adoc
+++ /dev/null
@@ -1,41 +0,0 @@
-//
-// ============LICENSE_START=======================================================
-//  Copyright (C) 2016-2018 Ericsson. All rights reserved.
-// ================================================================================
-// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
-// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
-// 
-// SPDX-License-Identifier: CC-BY-4.0
-// ============LICENSE_END=========================================================
-//
-// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
-//
-
-=== Start APEX Engine
-
-In a new terminal, start APEX with the new configuration for Websocket-Server ingress/egress:
-
-[source%nowrap,sh,numbered]
-----
-#: $APEX_HOME/bin/apexEngine.sh -c $APEX_HOME/examples/config/VPN/Ws2WsServerAvroContextJsonEvent.json
-----
-
-[source%nowrap,bat,numbered]
-----
-#: %APEX_HOME%\bin\apexEngine.bat -c %APEX_HOME%\examples\config\VPN\Ws2WsServerAvroContextJsonEvent.json
-----
-
-Wait for APEX to start, it takes a while to create all Websocket servers (about 8 seconds on a standard laptop without cached binaries).
-depending on your log messages, you will see no (some, a lot) log messages.
-If APEX starts correctly, the last few messages you should see are:
-
-[source%nowrap,sh,numbered]
-----
-2017-07-28 13:17:20,834 Apex [main] INFO c.e.a.s.engine.runtime.EngineService - engine model VPNPolicyModelAvro:0.0.1 added to the engine-AxArtifactKey:(name=VPNApexEngine-0,version=0.0.1)
-2017-07-28 13:17:21,057 Apex [Apex-apex-engine-service-0:0] INFO c.e.a.s.engine.runtime.EngineService - Engine AxArtifactKey:(name=VPNApexEngine-0,version=0.0.1) processing ...
-2017-07-28 13:17:21,296 Apex [main] INFO c.e.a.s.e.r.impl.EngineServiceImpl - Added the action listener to the engine
-Started Apex service
-----
-
-APEX is running in the new terminal and will produce output when the policy is triggered/executed.
-
diff --git a/src/site-docs/adoc/fragments/howto-websockets/demo-03-start-echo-client.adoc b/src/site-docs/adoc/fragments/howto-websockets/demo-03-start-echo-client.adoc
deleted file mode 100644
index 473696d46..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/demo-03-start-echo-client.adoc
+++ /dev/null
@@ -1,15 +0,0 @@
-//
-// ============LICENSE_START=======================================================
-//  Copyright (C) 2016-2018 Ericsson. All rights reserved.
-// ================================================================================
-// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
-// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
-// 
-// SPDX-License-Identifier: CC-BY-4.0
-// ============LICENSE_END=========================================================
-//
-// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
-//
-
-include::{adsite-tools-wsclients-dir}/site-docs/adoc/fragments/run-echo.adoc[leveloffset=+1]
-
diff --git a/src/site-docs/adoc/fragments/howto-websockets/demo-04-start-console-client.adoc b/src/site-docs/adoc/fragments/howto-websockets/demo-04-start-console-client.adoc
deleted file mode 100644
index 5a501e11b..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/demo-04-start-console-client.adoc
+++ /dev/null
@@ -1,15 +0,0 @@
-//
-// ============LICENSE_START=======================================================
-//  Copyright (C) 2016-2018 Ericsson. All rights reserved.
-// ================================================================================
-// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
-// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
-// 
-// SPDX-License-Identifier: CC-BY-4.0
-// ============LICENSE_END=========================================================
-//
-// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
-//
-
-include::{adsite-tools-wsclients-dir}/site-docs/adoc/fragments/run-console.adoc[leveloffset=+1]
-
diff --git a/src/site-docs/adoc/fragments/howto-websockets/demo-05-send-events.adoc b/src/site-docs/adoc/fragments/howto-websockets/demo-05-send-events.adoc
deleted file mode 100644
index 3f5955869..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/demo-05-send-events.adoc
+++ /dev/null
@@ -1,58 +0,0 @@
-//
-// ============LICENSE_START=======================================================
-//  Copyright (C) 2016-2018 Ericsson. All rights reserved.
-// ================================================================================
-// This file is licensed under the CREATIVE COMMONS ATTRIBUTION 4.0 INTERNATIONAL LICENSE
-// Full license text at https://creativecommons.org/licenses/by/4.0/legalcode
-// 
-// SPDX-License-Identifier: CC-BY-4.0
-// ============LICENSE_END=========================================================
-//
-// @author Sven van der Meer (sven.van.der.meer@ericsson.com)
-//
-
-=== Send Events
-
-Now you have the full system up and running:
-
-- Terminal 1: APEX ready and loaded
-- Terminal 2: an echo client, printing received messages produced by the VPN policy
-- Terminal 2: a console client, waiting for input on the console (standard in) and sending text to APEX
-
-We started the engine with the VPN policy example.
-So all the events we are using now are located in files in the following example directory:
-
-[source%nowrap,sh,numbered]
-----
-#: $APEX_HOME/examples/events/VPN
-> %APEX_HOME%\examples\events\VPN
-----
-
-To sends events, simply copy the content of the event files into Terminal 3 (the console client).
-It will read multi-line JSON text and send the events.
-So copy the content of `SetupEvents.json` into the client.
-APEX will trigger a policy and produce some output, the echo client will also print some events created in the policy.
-In Terminal 1 (APEX) you’ll see some status messages from the policy as:
-
-[source%nowrap,sh,numbered,subs="attributes+"]
-----
-include::{adsite-main-dir}/site-docs/adoc/fragments/howto-websockets/wsc-screens/vpn-setup-events.log[APEX output for VPN Setup Events]
-----
-
-In Terminal 2 (echo-client) you see the received events, the last two should look like:
-
-[source%nowrap,sh,numbered,subs="attributes+"]
-----
-include::{adsite-main-dir}/site-docs/adoc/fragments/howto-websockets/wsc-screens/echo-client-received-events.log[Echo Client Received Events]
-----
-
-Congratulations, you have triggered a policy in APEX using Websockets, the policy did run through, created events, picked up by the echo-client.
-
-Now you can send the Link 09 and Link 10 events, they will trigger the actual VPN policy and some calculations are made.
-Let’s take the Link 09 events from `Link09Events.json`, copy them all into Terminal 3 (the console).
-APEX will run the policy (with some status output), and the echo client will receive and print events.
-
-To terminate the applications, simply press `CTRL+C` in Terminal 1 (APEX).
-This will also terminate the echo-client in Terminal 2.
-Then type `exit<enter>` in Terminal 3 (or `CTRL+C`) to terminate the console-client.
-
diff --git a/src/site-docs/adoc/fragments/howto-websockets/wsc-screens/echo-client-received-events.log b/src/site-docs/adoc/fragments/howto-websockets/wsc-screens/echo-client-received-events.log
deleted file mode 100644
index b3aeb43dd..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/wsc-screens/echo-client-received-events.log
+++ /dev/null
@@ -1,29 +0,0 @@
-ws-simple-echo: received
----------------------------------
-{
-  "name": "VPNCustomerCtxtActEvent",
-  "version": "0.0.1",
-  "nameSpace": "org.onap.policy.apex.domains.vpn.events",
-  "source": "Source",
-  "target": "Target",
-  "CustomerName": "C",
-  "LinkList": "L09 L10",
-  "SlaDT": 300,
-  "YtdDT": 300
-}
-=================================
-
-ws-simple-echo: received
----------------------------------
-{
-  "name": "VPNCustomerCtxtActEvent",
-  "version": "0.0.1",
-  "nameSpace": "org.onap.policy.apex.domains.vpn.events",
-  "source": "Source",
-  "target": "Target",
-  "CustomerName": "D",
-  "LinkList": "L09 L10",
-  "SlaDT": 300,
-  "YtdDT": 400
-}
-=================================
diff --git a/src/site-docs/adoc/fragments/howto-websockets/wsc-screens/vpn-setup-events.log b/src/site-docs/adoc/fragments/howto-websockets/wsc-screens/vpn-setup-events.log
deleted file mode 100644
index 071d43532..000000000
--- a/src/site-docs/adoc/fragments/howto-websockets/wsc-screens/vpn-setup-events.log
+++ /dev/null
@@ -1,29 +0,0 @@
-{Link=L09, LinkUp=true}
-L09     true
-outFields: {Link=L09, LinkUp=true}
-{Link=L10, LinkUp=true}
-L09     true
-L10     true
-outFields: {Link=L10, LinkUp=true}
-{CustomerName=C, LinkList=L09 L10, SlaDT=300, YtdDT=300}
-*** Customers ***
-C       300     300     [L09, L10]
-outFields: {CustomerName=C, LinkList=L09 L10, SlaDT=300, YtdDT=300}
-{CustomerName=A, LinkList=L09 L10, SlaDT=300, YtdDT=50}
-*** Customers ***
-A       300     50      [L09, L10]
-C       300     300     [L09, L10]
-outFields: {CustomerName=A, LinkList=L09 L10, SlaDT=300, YtdDT=50}
-{CustomerName=D, LinkList=L09 L10, SlaDT=300, YtdDT=400}
-*** Customers ***
-A       300     50      [L09, L10]
-C       300     300     [L09, L10]
-D       300     400     [L09, L10]
-outFields: {CustomerName=D, LinkList=L09 L10, SlaDT=300, YtdDT=400}
-{CustomerName=B, LinkList=L09 L10, SlaDT=300, YtdDT=299}
-*** Customers ***
-A       300     50      [L09, L10]
-B       300     299     [L09, L10]
-C       300     300     [L09, L10]
-D       300     400     [L09, L10]
-outFields: {CustomerName=B, LinkList=L09 L10, SlaDT=300, YtdDT=299}
\ No newline at end of file