summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/index.rst9
-rw-r--r--docs/sections/administration.rst6
-rw-r--r--docs/sections/configuration.rst36
-rw-r--r--docs/sections/consumedapis.rst32
-rw-r--r--docs/sections/distribution.rst749
-rw-r--r--docs/sections/example.rst1
-rw-r--r--docs/sections/glossary.rst74
-rw-r--r--docs/sections/homingspecification.rst11
-rw-r--r--docs/sections/humaninterfaces.rst6
-rw-r--r--docs/sections/installation.rst758
-rw-r--r--docs/sections/release-notes.rst122
11 files changed, 898 insertions, 906 deletions
diff --git a/docs/index.rst b/docs/index.rst
index 69b61c3..e626a31 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -39,15 +39,10 @@ is an orchestration service, or Nova is a compute service.
./sections/architecture.rst
./sections/offeredapis.rst
- ./sections/homingspecification.rst
./sections/consumedapis.rst
- Distribution <./sections/distribution.rst>
- ./sections/logging.rst
./sections/installation.rst
- ./sections/configuration.rst
- ./sections/administration.rst
- ./sections/humaninterfaces.rst
- ./sections/glossary.rst
+ ./sections/logging.rst
+ ./sections/homingspecification.rst
Example Homing Templates <./sections/example.rst>
./sections/release-notes.rst
diff --git a/docs/sections/administration.rst b/docs/sections/administration.rst
deleted file mode 100644
index 0650561..0000000
--- a/docs/sections/administration.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-Administration
-=============================================
-
- Administration - TBD \ No newline at end of file
diff --git a/docs/sections/configuration.rst b/docs/sections/configuration.rst
deleted file mode 100644
index 5e55a89..0000000
--- a/docs/sections/configuration.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-Configuration
-=============================================
-
-For the configuration inside the config-file, please refer to the README inside Gerrit
-
-It is worth noting that A&AI and MUSIC may be needed to run HAS project. Please refer to their setup page for installation.
-
-For MUSIC version 2.4.x and newer refer Setup for Developing MUSIC
-
-Running the example
------------------------
-To start the process, execute the following commands:
-
- $ conductor-api --port=8091 -- --config-file={conductor_conf_file_location}
-
- $ conductor-controller --config-file={conductor_conf_file_location}
-
- $ conductor-solver --config-file={conductor_conf_file_location}
-
- $ conductor-reservation --config-file={conductor_conf_file_location}
-
- $ conductor-data --config-file={conductor_conf_file_location}
-
-Committing the Code
------------------------
- $ git commit -am "Initial proj struct"
-
- $ git review -s
-
- $ git commit -as --amend
-
-# scroll down 2 lines (above your Change-ID) insert "Issue-ID: {issue_id}"
-
- $ git review
diff --git a/docs/sections/consumedapis.rst b/docs/sections/consumedapis.rst
index 954a138..00ffde9 100644
--- a/docs/sections/consumedapis.rst
+++ b/docs/sections/consumedapis.rst
@@ -2,17 +2,35 @@
Consumed APIs
=============================================
-The following are the dependencies for the project based on the scope for the Beijing Release.
-The required dependencies have been identified based on the current homing requirements for the vCPE use case,
-and the potential dependencies are tentative dependencies that may exist based on how the information required
-for homing (e.g., Hardware Platform Enablement, VIM attributes) is available.
-
+The following are the dependencies for the project based on the scope for the Casablanca Release.
AAI
--------------------------------------------
-See documentation for Active and Available Inventory component
+See ReadTheDocs documentation for Active and Available Inventory component
+ - `AAI project page <https://onap.readthedocs.io/en/beijing/submodules/aai/aai-common.git/docs/index.html>`_
Multi-Cloud
--------------------------------------------
-See documentation for Multi-Cloud component \ No newline at end of file
+See ReadTheDocs documentation for Multi-Cloud component
+
+ - `Multi-Cloud project page <https://onap.readthedocs.io/en/beijing/submodules/multicloud/framework.git/docs/index.html>`_
+
+MUSIC
+--------------------------------------------
+See ReadTheDocs documentation for Multi-site State Coordination Service component
+
+ - `MUSIC project page <https://onap.readthedocs.io/en/beijing/submodules/music.git/docs/index.html>`_
+
+SDNC
+--------------------------------------------
+See ReadTheDocs documentation for Software Defined Network Controller component
+
+ - `SDNC project page <https://onap.readthedocs.io/en/beijing/submodules/sdnc/oam.git/docs/index.html>`_
+
+SMS
+--------------------------------------------
+The Secrets Management Service is a component of the Application Authorization Framework. Disclaimer -
+as of this writing AAF RTD does not include discussion of SMS
+
+ - `SMS project page <https://onap.readthedocs.io/en/beijing/submodules/aaf/authz.git/docs/index.html>`_
diff --git a/docs/sections/distribution.rst b/docs/sections/distribution.rst
deleted file mode 100644
index df7a4c2..0000000
--- a/docs/sections/distribution.rst
+++ /dev/null
@@ -1,749 +0,0 @@
-Python/Linux Distribution Notes
-===============================
-
-*Updated: 10 Nov 2017 23:30 GMT*
-
-This document exists to help bridge the gap between the Conductor python
-package and any downstream distribution. The steps outlined herein may
-be taken into consideration when creating an AT&T SWM package,
-Ubuntu/Debian package, Chef cookbook, or Ansible playbook.
-
-Components
-----------
-
-Conductor consists of five services that work together:
-
-- **``conductor-api``**: An HTTP REST API
-- **``conductor-controller``**: Validation, translation, and
- status/results
-- **``conductor-data``**: Inventory provider and service controller
- gateway
-- **``conductor-solver``**: Processing and solution calculation
-- **``conductor-reservation``**: Reserves the suggested solution solved
- by Solver component.
-
-Workflow
---------
-
-- Deployment **plans** are created, viewed, and deleted via
- ``conductor-api`` and its `REST API <doc/api/README.md>`__.
-- Included within each ``conductor-api`` plan request is a `Homing
- Template <doc/template/README.md>`__.
-- Homing Templates describe a set of inventory demands and constraints
- to be solved against.
-- ``conductor-api`` hands off all API requests to
- ``conductor-controller`` for handling.
-- All deployment plans are assigned a unique identifier (UUID-4), which
- can be used to check for solution status asynchronously. (Conductor
- does not support callbacks at this time.)
-- ``conductor-controller`` ensures templates are well-formed and valid.
- Errors and remediation are made visible through ``conductor-api``.
- When running in debug mode, the API will also include a python
- traceback in the response body, if available.
-- ``conductor-controller`` uses ``conductor-data`` to resolve demands
- against a particular **inventory provider** (e.g., A&AI).
-- ``conductor-controller`` translates the template into a format
- suitable for solving.
-- As each template is translated, ``conductor-solver`` begins working
- on it.
-- ``conductor-solver`` uses ``conductor-data`` to resolve constraints
- against a particular **service controller** (e.g., SDN-C).
-- ``conductor-solver`` determines the most suitable inventory to
- recommend.
-- ``conductor-reservation`` attempts to reserve the solved solution in
- SDN-GC
-
-**NOTE**: There is no Command Line Interface or Python API Library at
-this time.
-
-Pre-Flight and Pre-Installation Considerations
-----------------------------------------------
-
-AT&T Application Identifiers and Roles
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-- App/Tool Name: ECOMP Conductor
-- MOTS Application ID: 26213
-- MechID: m04308
-- ECOMP Feature ID: F13704
-- PMT: 461306
-- UAM Role Name: Conductor Production Support
-- UAM Role id: 0000025248
-
-Root
-~~~~
-
-Be aware that some commands may require ``sudo``, depending on the
-account being used to perform the installation.
-
-Proxy
-~~~~~
-
-If line-of-sight to internet-facing repositories is permitted and
-available, set the following shell environment variables if AT&T proxy
-services are required:
-
-.. code:: bash
-
- $ export http_proxy="http://one.proxy.att.com:8080/"
- $ export https_proxy="http://one.proxy.att.com:8080/"
-
-Requirements
-~~~~~~~~~~~~
-
-Conductor is officially supported on `Ubuntu 14.04 LTS (Trusty
-Tahr) <http://releases.ubuntu.com/14.04/>`__, though it should also work
-on newer releases.
-
-Ensure the following Ubuntu packages are present, as they may not be
-included by default:
-
-- `libffi-dev <http://packages.ubuntu.com/trusty/libffi-dev>`__
-- `postgresql-server-dev-9.3 <http://packages.ubuntu.com/trusty/postgresql-server-dev-9.3>`__
-- `python2.7 <http://packages.ubuntu.com/trusty/python2.7>`__
-
-``conductor-api`` may be run as-is for development and test purposes.
-When used in a production environment, it is recommended that
-``conductor-api`` run under a multithreaded httpd service supporting
-`WSGI <https://www.wikipedia.org/wiki/Web_Server_Gateway_Interface>`__,
-tuned as appropriate.
-
-Configuration instructions for **apache2 httpd** and **nginx** are
-included herein. Respective package requirements are:
-
-- `apache2 <http://packages.ubuntu.com/trusty/apache2>`__ and
- `libapache2-mod-wsgi <http://packages.ubuntu.com/trusty/libapache2-mod-wsgi>`__
-- `nginx <http://packages.ubuntu.com/trusty/nginx>`__ and
- `uwsgi <http://packages.ubuntu.com/trusty/uwsgi>`__
-
-All Conductor services use AT&T `Music <https://github.com/att/music>`__
-for data storage/persistence and/or as a RPC transport mechanism.
-Consult the `Music Local Installation
-Guide <https://github.com/att/music/blob/master/README.md>`__ for
-installation/configuration steps.
-
-Networking
-~~~~~~~~~~
-
-All conductor services require line-of-sight access to all Music
-servers/ports.
-
-The ``conductor-api`` service uses TCP port 8091.
-
-Security
-~~~~~~~~
-
-``conductor-api`` is accessed via HTTP. SSL/TLS certificates and
-AuthN/AuthZ (e.g., AAF) are not supported at this time.
-
-Conductor makes use of plugins that act as gateways to *inventory
-providers* and *service controllers*. At present, two plugins are
-supported out-of-the-box: **A&AI** and **SDN-C**, respectively.
-
-A&AI requires two-way SSL/TLS. Certificates must be registered and
-whitelisted with A&AI. SDN-C uses HTTP Basic Authentication. Consult
-with each respective service for official information on how to obtain
-access.
-
-Storage
-~~~~~~~
-
-For a cloud environment in particular, it may be desirable to use a
-separate block storage device (e.g., an OpenStack Cinder volume) for
-logs, configuration, and other data persistence. In this way, it becomes
-a trivial matter to replace the entire VM if necessary, followed by
-reinstallation of the app and any supplemental configuration. Take this
-into consideration when setting various Conductor config options.
-
-Python Virtual Environments
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-At present, Conductor installation is only supported at the (upstream)
-python package level and not the (downstream) Ubuntu distribution or SWM
-package levels.
-
-To mitigate/eliminate the risk of introducing conflicts with other
-python applications or Ubuntu/SWM package dependencies, consider
-installing Conductor in a `python virtual
-environment <http://docs.python-guide.org/en/latest/dev/virtualenvs/>`__
-(or *venv* for short).
-
-Example venv-aware WSGI app configurations, sysvinit scripts, and
-upstart scripts can be found in the Conductor repository under
-`examples </examples/>`__.
-
-Python Package Dependencies
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Conductor is installed using the python ``pip`` command. ``pip`` uses a
-python project's `requirements manifest </requirements.txt>`__ to
-install all python module dependencies.
-
-**NOTE**: When line-of-sight access to a PyPI-compatible package index
-is not available, advance installation of Conductor's python package
-dependencies is required *before* installation.
-
-Other Production Environment Considerations
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-TBD. ``:)``
-
-Over time, considerations may include services such as:
-
-- AAF
-- AppMetrics
-- Introscope
-- Nagios
-- Splunk
-- UAM
-
-Installation and Configuration
-------------------------------
-
-**IMPORTANT**: Perform the steps in this section after *optionally*
-configuring and activating a python virtual environment.
-
-Installing From a PyPI Repository
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-In ONAP, the ``conductor`` package can be found on \`\`\`\`.
-
-Installation is via the ``pip`` command. Here is an example ``pip.conf``
-file that uses both the internet and intranet-facing PyPI repositories:
-
-.. code:: ini
-
- [global]
- index = https://pypi.python.org/pypi
- index-url = https://pypi.python.org/simple
- extra-index-url =
- trusted-host =
-
-Once the configuration is in place, installation is simple:
-
-.. code:: bash
-
- $ pip install of-has
-
-To upgrade or downgrade, simply re-run ``pip install`` using the
-appropriate ``pip`` command line options.
-
-**NOTE**: Be sure proxy settings are in place if they're required to
-access ``pypi.python.org``.
-
-Installing From Source
-~~~~~~~~~~~~~~~~~~~~~~
-
-Conductor source in ONAP is maintained in
-https://gerrit.onap.org/r/optf/has.
-
-Clone the git repository, and then install from within the ``conductor``
-directory:
-
-.. code:: bash
-
- $ git clone https://gerrit.onap.org/r/optf/has
- Cloning into 'conductor'...
- remote: Counting objects: 2291, done.
- remote: Compressing objects: 88% (1918/2179)
- remote: Compressing objects: 100% (2179/2179), done.
- remote: Total 2291 (delta 1422), reused 0 (delta 0)
- Receiving objects: 100% (2291/2291), 477.59 KiB | 0 bytes/s, done.
- Resolving deltas: 100% (1422/1422), done.
- $ cd conductor
- $ pip install .
-
-The latest source can be pulled from ONAP at any time and reinstalled:
-
-.. code:: bash
-
- $ git pull
- $ pip install .
-
-Verifying Installation
-~~~~~~~~~~~~~~~~~~~~~~
-
-Each of the five Conductor services may be invoked with the ``--help``
-option:
-
-.. code:: bash
-
- $ conductor-api -- --help
- $ conductor-controller --help
- $ conductor-data --help
- $ conductor-solver --help
- $ conductor-reservation --help
-
-**NOTE**: The ``conductor-api`` command is deliberate. ``--`` is used as
-as separator between the arguments used to start the WSGI server and the
-arguments passed to the WSGI application.
-
-Post-Flight and Post-Installation Considerations
-------------------------------------------------
-
-User and Group
-~~~~~~~~~~~~~~
-
-It's good practice to create an unprivileged account (e.g., a user/group
-named ``conductor``) and run all Conductor services as that user:
-
-.. code:: bash
-
- $ sudo addgroup --system conductor
- $ sudo adduser --system --home /var/lib/conductor --ingroup conductor --no-create-home --shell /bin/false conductor
-
-SSL/TLS Certificates
-~~~~~~~~~~~~~~~~~~~~
-
-The A&AI Inventory Provider Plugin requiries two-way SSL/TLS. After
-provisioning a certificate per A&AI guidelines, it will be necessary to
-securely install the certificate, key, and certificate authority bundle.
-
-When running conductor services as ``conductor:conductor``
-(recommended), consider co-locating all of these files under the
-configuration directory. For example, when using ``/etc/conductor``:
-
-.. code:: bash
-
- $ # Certificate files (crt extension, 644 permissions)
- $ sudo mkdir /etc/conductor/ssl/certs
- $ # Private Certificate Key files (key extension, 640 permissions)
- $ sudo mkdir /etc/conductor/ssl/private
- $ # Certificate Authority (CA) Bundles (crt extension, 644 permissions)
- $ sudo mkdir /etc/conductor/ssl/ca-certificates
- $ # Add files to newly created directories, then set ownership
- $ sudo chmod -R conductor:conductor /etc/conductor/ssl
-
-For a hypothetical domain name ``imacculate.client.research.att.com``,
-example filenames could be as follows:
-
-.. code:: bash
-
- $ find ssl -type f -printf '%M %u:%g %f\n'
- -rw-r----- conductor:conductor imacculate.client.research.att.com.key
- -rw-r--r-- conductor:conductor Symantec_Class_3_Secure_Server_CA.crt
- -rw-r--r-- conductor:conductor imacculate.client.research.att.com.crt
-
-When running conductor services as ``root``, consider these existing
-Ubuntu filesystem locations for SSL/TLS files:
-
-**Certificate** files (``crt`` extension) are typically stored in
-``/etc/ssl/certs`` with ``root:root`` ownership and 644 permissions.
-
-**Private Certificate Key** files (``key`` extension) are typically
-stored in ``/etc/ssl/private`` with ``root:root`` ownership and 640
-permissions.
-
-**Certificate Authority (CA) Bundles** (``crt`` extension) are typically
-stored in ``/usr/share/ca-certificates/conductor`` with ``root:root``
-ownership, and 644 permissions. These Bundle files are then symlinked
-within ``/etc/ssl/certs`` using equivalent filenames, a ``pem``
-extension, and ``root:root`` ownership.
-
-**NOTE**: LUKS (Linux Unified Key Setup) is not supported by Conductor
-at this time.
-
-Configuration
-~~~~~~~~~~~~~
-
-Configuration files are located in ``etc/conductor`` relative to the
-python environment Conductor is installed in.
-
-To generate a sample configuration file, change to the directory just
-above where ``etc/conductor`` is located (e.g., ``/`` for the default
-environment, or the virtual environment root directory). Then:
-
-.. code:: bash
-
- $ oslo-config-generator --config-file=etc/conductor/conductor-config-generator.conf
-
-This will generate ``etc/conductor/conductor.conf.sample``.
-
-Because the configuration directory and files will include credentials,
-consider removing world permissions:
-
-.. code:: bash
-
- $ find etc/conductor -type f -exec chmod 640 {} +
- $ find etc/conductor -type d -exec chmod 750 {} +
-
-The sample config may then be copied and edited. Be sure to backup any
-previous ``conductor.conf`` if necessary.
-
-.. code:: bash
-
- $ cd etc/conductor
- $ cp -p conductor.conf.sample conductor.conf
-
-``conductor.conf`` is fully annotated with descriptions of all options.
-Defaults are included, with all options commented out. Conductor will
-use defaults even if an option is not present in the file. To change an
-option, simply uncomment it and edit its value.
-
-With the exception of the ``DEFAULT`` section, it's best to restart the
-Conductor services after making any config changes. In some cases, only
-one particular service actually needs to be restarted. When in doubt,
-however, it's best to restart all of them.
-
-A few options in particular warrant special attention:
-
-::
-
- [DEFAULT]
-
- # If set to true, the logging level will be set to DEBUG instead of the default
- # INFO level. (boolean value)
- # Note: This option can be changed without restarting.
- #debug = false
-
-For more verbose logging across all Conductor services, set ``debug`` to
-true.
-
-::
-
- [aai]
-
- # Base URL for A&AI, up to and not including the version, and without a
- # trailing slash. (string value)
- #server_url = https://controller:8443/aai
-
- # SSL/TLS certificate file in pem format. This certificate must be registered
- # with the A&AI endpoint. (string value)
- #certificate_file = certificate.pem
-
- # Private Certificate Key file in pem format. (string value)
- #certificate_key_file = certificate_key.pem
-
- # Certificate Authority Bundle file in pem format. Must contain the appropriate
- # trust chain for the Certificate file. (string value)
- #certificate_authority_bundle_file = certificate_authority_bundle.pem
-
-Set ``server_url`` to the A&AI server URL, to but not including the
-version, omitting any trailing slash. Conductor supports A&AI API v9 at
-a minimum.
-
-Set the ``certificate`` prefixed keys to the appropriate SSL/TLS-related
-files.
-
-**IMPORTANT**: The A&AI server may have a mismatched host/domain name
-and SSL/TLS certificate. In such cases, certificate verification will
-fail. To mitigate this, ``certificate_authority_bundle_file`` may be set
-to an empty value. While Conductor normally requires a CA Bundle
-(otherwise why bother using SSL/TLS), this requirement has been
-temporarily relaxed so that development and testing may continue.
-
-::
-
- [messaging_server]
-
- # Log debug messages. Default value is False. (boolean value)
- #debug = false
-
-When the ``DEFAULT`` section's ``debug`` option is ``true``, set this
-section's ``debug`` option to ``true`` to enable detailed Conductor-side
-RPC-over-Music debug messages.
-
-Be aware, it is voluminous. "You have been warned." ``:)``
-
-::
-
- [music_api]
-
- # List of hostnames (round-robin access) (list value)
- #hostnames = localhost
-
- # Log debug messages. Default value is False. (boolean value)
- #debug = false
-
-Set ``hostnames`` to match wherever the Music REST API is being hosted
-(wherever Apache Tomcat and ``MUSIC.war`` are located).
-
-When the ``DEFAULT`` section's ``debug`` option is ``true``, set this
-section's ``debug`` option to ``true`` to enable detailed Conductor-side
-MUSIC API debug messages.
-
-The previous comment around the volume of log lines applies even more so
-here. (Srsly. We're not kidding.)
-
-**IMPORTANT**: Conductor does not presently use Music's atomic
-consistency features due to concern around lock creation/acquisition.
-Instead, Conductor uses eventual consistency. For this reason,
-consistency issues may occur when using Music in a multi-server, High
-Availability configuration.
-
-::
-
- [sdnc]
-
- # Base URL for SDN-C. (string value)
- #server_url = https://controller:8443/restconf
-
- # Basic Authentication Username (string value)
- #username = <None>
-
- # Basic Authentication Password (string value)
- #password = <None>
-
-Set ``server_url`` to the SDN-C server URL, omitting any trailing slash.
-
-Set ``username`` and ``password`` to the appropriate values as directed
-by SDN-C.
-
-Running for the First Time
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Each Conductor component may be run interactively. In this case, the
-user does not necessarily matter.
-
-When running interactively, it is suggested to run each command in a
-separate terminal session and in the following order:
-
-.. code:: bash
-
- conductor-data --config-file=/etc/conductor/conductor.conf
- conductor-controller --config-file=/etc/conductor/conductor.conf
- conductor-solver --config-file=/etc/conductor/conductor.conf
- conductor-reservation --config-file=/etc/conductor/conductor.conf
- conductor-api --port=8091 -- --config-file=/etc/conductor/conductor.conf
-
-Optionally, use an application like
-`screen <http://packages.ubuntu.com/trusty/screen>`__ to nest all five
-terminal sessions within one detachable session. (This is also the same
-package used by
-`DevStack <https://docs.openstack.org/developer/devstack/>`__.)
-
-To verify that ``conductor-api`` can be reached, browse to
-``http://HOST:8091/``, where HOST is the hostname ``conductor-api`` is
-running on. No AuthN/AuthZ is required at this time. Depending on
-network considerations, it may be necessary to use a command like
-``wget`` instead of a desktop browser.
-
-The response should look similar to:
-
-.. code:: json
-
- {
- "versions": {
- "values": [
- {
- "status": "development",
- "updated": "2016-11-01T00:00:00Z",
- "media-types": [
- {
- "base": "application/json",
- "type": "application/vnd.ecomp.homing-v1+json"
- }
- ],
- "id": "v1",
- "links": [
- {
- "href": "http://127.0.0.1:8091/v1",
- "rel": "self"
- },
- {
- "href": "http://conductor.research.att.com/",
- "type": "text/html",
- "rel": "describedby"
- }
- ]
- }
- ]
- }
- }
-
-Sample API Calls and Homing Templates
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-A `Postman <http://getpostman.com/>`__ collection illustrating sample
-requests is available upon request. The collection will also be added in
-a future revision.
-
-`Sample homing templates </doc/examples/README.md>`__ are also
-available.
-
-Ubuntu Service Scripts
-~~~~~~~~~~~~~~~~~~~~~~
-
-Ubuntu sysvinit (init.d) and upstart (init) scripts are typically
-installed at the Ubuntu package level. Since there is no such packaging
-at this time, example scripts have been provided in the repository.
-
-To install, place all Conductor `sysvinit
-scripts </examples/distribution/ubuntu/init.d>`__ in ``/etc/init.d``,
-and all `upstart scripts </examples/distribution/ubuntu/init>`__ in
-``/etc/init``.
-
-Set file permissions:
-
-.. code:: bash
-
- $ sudo chmod 644 /etc/init/conductor*
- $ sudo chmod 755 /etc/init.d/conductor*
-
-If a python virtual environment is being used, edit each
-``/etc/init/conductor*`` and ``/etc/init.d/conductor*`` prefixed file so
-that ``PYTHON_HOME`` is set to the python virtual environment root
-directory.
-
-Next, enable the scripts:
-
-.. code:: bash
-
- $ sudo update-rc.d conductor-api defaults
- $ sudo update-rc.d conductor-controller defaults
- $ sudo update-rc.d conductor-data defaults
- $ sudo update-rc.d conductor-solver defaults
- $ sudo update-rc.d conductor-reservation defaults
- $ sudo initctl reload-configuration
-
-Conductor components may now be started/stopped like any other Ubuntu
-service, for example:
-
-.. code:: bash
-
- $ sudo service conductor-api start
- $ sudo service conductor-api status
- $ sudo service conductor-api restart
- $ sudo service conductor-api stop
-
-Conductor service scripts automatically create directories for ``log``,
-``lock``, ``run``, ``lib``, and ``log`` files, e.g.,
-``/var/log/conductor`` and so on.
-
-Log File Rotation
-~~~~~~~~~~~~~~~~~
-
-Sample ``logrotate.d`` configuration files have been provided in the
-repository.
-
-To install, place all Conductor `logrotate
-files </examples/distribution/ubuntu/logrotate.d>`__ in
-``/etc/logrotate.d``.
-
-Set file ownership and permissions:
-
-.. code:: bash
-
- $ sudo chown root:root /etc/logrotate.d/conductor*
- $ sudo chmod 644 /etc/logrotate.d/conductor*
-
-``logrotate.d`` automatically recognizes new files at the next log
-rotation opportunity and does not require restarting.
-
-Running conductor-api Under apache2 httpd and mod\_wsgi
--------------------------------------------------------
-
-Sample configuration files have been provided in the repository.
-
-These instructions presume a ``conductor`` user exists. See the
-**Service Scripts** section for details.
-
-First, set up a few directories:
-
-.. code:: bash
-
- $ sudo mkdir -p /var/www/conductor
- $ sudo mkdir /var/log/apache2/conductor
-
-To install, place the Conductor `WSGI application
-file </conductor/api/app.wsgi>`__ in ``/var/www/conductor``.
-
-Set the owner/group of both directories/files to ``conductor``:
-
-.. code:: bash
-
- $ sudo chown -R conductor:conductor /var/log/apache2/conductor /var/www/conductor
-
-Next, place the Conductor `apache2 httpd site config
-file </examples/apache2/conductor.conf>`__ in
-``/etc/apache2/sites-available``.
-
-Set the owner/group to ``root``:
-
-.. code:: bash
-
- $ sudo chown -R root:root /etc/apache2/sites-available/conductor.conf
-
-If Conductor was installed in a python virtual environment, append
-``python-home=VENV`` to ``WSGIDaemonProcess``, where ``VENV`` is the
-python virtual environment root directory.
-
-**IMPORTANT**: Before proceeding, disable the ``conductor-api`` sysvinit
-and upstart services, as the REST API will now be handled by apache2
-httpd. Otherwise there will be a port conflict, and you will be sad.
-
-Enable the Conductor site, ensure the configuration syntax is valid, and
-gracefully restart apache2 httpd.
-
-.. code:: bash
-
- $ sudo a2ensite conductor
- $ sudo apachectl -t
- Syntax OK
- $ sudo apachectl graceful
-
-To disable the Conductor site, run ``sudo a2dissite conductor``, then
-gracefully restart once again. Optionally, re-enable the
-``conductor-api`` sysvinit and upstart services.
-
-Running conductor-api Under nginx and uWSGI
--------------------------------------------
-
-Sample configuration files have been provided in the repository.
-
-These instructions presume a ``conductor`` user exists. See the
-**Service Scripts** section for details.
-
-To install, place the Conductor `nginx config
-files </examples/nginx/>`__ and `WSGI application
-file </conductor/api/app.wsgi>`__ in ``/etc/nginx`` (taking care to
-backup any prior configuration files). It may be desirable to
-incorporate Conductor's ``nginx.conf`` into the existing config.
-
-Rename ``app.wsgi`` to ``conductor.wsgi``:
-
-.. code:: bash
-
- $ cd /etc/nginx
- $ sudo mv app.wsgi conductor.wsgi
-
-In ``nginx.conf``, set ``CONDUCTOR_API_FQDN`` to the server name.
-
-**IMPORTANT**: Before proceeding, disable the ``conductor-api`` sysvinit
-and upstart services, as the REST API will now be handled by nginx.
-Otherwise there will be a port conflict, and you will be sad.
-
-Restart nginx:
-
-.. code:: bash
-
- $ sudo service nginx restart
-
-Then, run ``conductor-api`` under nginx using uWSGI:
-
-.. code:: bash
-
- $ sudo uwsgi -s /tmp/uwsgi.sock --chmod-socket=777 --wsgi-file /etc/nginx/conductor.wsgi --callable application --set port=8091
-
-To use a python virtual environment, add ``--venv VENV`` to the
-``uwsgi`` command, where ``VENV`` is the python virtual environment root
-directory.
-
-Uninstallation
---------------
-
-Activate a virtual environment (venv) first, if necessary, then
-uninstall with:
-
-.. code:: bash
-
- $ pip uninstall ecomp-conductor
-
-Remove any previously made configuration file changes, user accounts,
-Ubuntu/SWM packages, and other settings as needed.
-
-Bug Reporting and Feedback
---------------------------
-
-... is encouraged. Please raise an issue at:
-https://jira.onap.org/projects/OPTFRA/summary
diff --git a/docs/sections/example.rst b/docs/sections/example.rst
index b1a5313..a3dd55b 100644
--- a/docs/sections/example.rst
+++ b/docs/sections/example.rst
@@ -62,6 +62,7 @@ Example 1
- distance_between:
- customer_loc
- vG
+
Example 1
---------
diff --git a/docs/sections/glossary.rst b/docs/sections/glossary.rst
deleted file mode 100644
index 99e56e5..0000000
--- a/docs/sections/glossary.rst
+++ /dev/null
@@ -1,74 +0,0 @@
-Glossary
-========
-
-+-----------------------+---------------+
-| Term | Description |
-+=======================+===============+
-| **A&AI** | Active and |
-| | Available |
-| | Inventory |
-+-----------------------+---------------+
-| **Cloud** | tbd |
-| | |
-+-----------------------+---------------+
-| **Conductor** | AIC/ECOMP |
-| | Homing |
-| | service. |
-+-----------------------+---------------+
-| **Constraint** | tbd |
-| | |
-+-----------------------+---------------+
-| **Cost Function** | tbd |
-| | |
-+-----------------------+---------------+
-| **Data Center** | tbd |
-| | |
-+-----------------------+---------------+
-| **DCAE** | Data |
-| | Collection, |
-| | Analytics, |
-| | Events |
-+-----------------------+---------------+
-| **Demand** | tbd |
-| | |
-+-----------------------+---------------+
-| **Homing** | Canonical |
-| | service name |
-| | for Conductor |
-+-----------------------+---------------+
-| **Host** | tbd |
-| | |
-+-----------------------+---------------+
-| **Inventory** | tbd |
-| | |
-+-----------------------+---------------+
-| **Inventory Source** | tbd |
-| | |
-+-----------------------+---------------+
-| **LCP (and vLCP)** | Local Control |
-| | Plane (or |
-| | virtual LCP). |
-| | Synonymous |
-| | with |
-| | **Region**. |
-+-----------------------+---------------+
-| **Location** | tbd |
-| | |
-+-----------------------+---------------+
-| **Network Link** | tbd |
-| | |
-+-----------------------+---------------+
-| **Region** | Synonymous |
-| | with **LCP**. |
-+-----------------------+---------------+
-| **Service Inventory** | tbd |
-| | |
-+-----------------------+---------------+
-| **Site** | tbd |
-| | |
-+-----------------------+---------------+
-
-Contact
--------
-
-Joe D'Andrea jdandrea@research.att.com
diff --git a/docs/sections/homingspecification.rst b/docs/sections/homingspecification.rst
index 7ab1859..0edb441 100644
--- a/docs/sections/homingspecification.rst
+++ b/docs/sections/homingspecification.rst
@@ -1135,7 +1135,7 @@ supported by the services, etc.
| ``attributes_value`` | Attributes value |
+--------------------------+-------------------------------------------+
-*Note: Each VFC must have one directive with type 'flavor_directives' to put the
+*Note*: Each VFC must have one directive with type 'flavor_directives' to put the
flavors inside. The ``attribute_name`` is the place to put flavor label and the
``attribute_value`` will first left blank. After getting the proper flavor, OOF will
merge the flavor name into the ``attribute_value`` inside flavor directives. Also,
@@ -1184,6 +1184,9 @@ together in ``directives``, as they are using the same structure as 'directives'
Example for HEAT request(SO)
+*Note*: Where "attributes":[{"attribute_name":" oof_returned_flavor_label_for_vgw_1 ",
+ Admin needs to ensure that this value is same as flavor parameter in HOT
+
.. code-block:: json
{
@@ -1202,7 +1205,7 @@ Example for HEAT request(SO)
"type":"flavor_directives",
"attributes":[
{
- "attribute_name":" oof_returned_flavor_label_for_vgw_0 ", //Admin needs to ensure that this value is same as flavor parameter in HOT
+ "attribute_name":" oof_returned_flavor_label_for_vgw_0 ",
"attribute_value": "<Blank>"
}
]
@@ -1283,7 +1286,7 @@ Example for HEAT request(SO)
"type":"flavor_directives",
"attributes":[
{
- "attribute_name":" oof_returned_flavor_label_for_vgw_1 ", //Admin needs to ensure that this value is same as flavor parameter in HOT
+ "attribute_name":" oof_returned_flavor_label_for_vgw_1 ",
"attribute_value": "<Blank>"
}
]
@@ -1372,7 +1375,7 @@ Example for HEAT request(SO)
}
}
}
-
+
Example for Pure TOSCA request(VF-C)
.. code-block:: json
diff --git a/docs/sections/humaninterfaces.rst b/docs/sections/humaninterfaces.rst
deleted file mode 100644
index 5b8c3e7..0000000
--- a/docs/sections/humaninterfaces.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-Human Interfaces
-=============================================
-
- OOF HAS does not expose a human interface \ No newline at end of file
diff --git a/docs/sections/installation.rst b/docs/sections/installation.rst
index f25aea3..df7a4c2 100644
--- a/docs/sections/installation.rst
+++ b/docs/sections/installation.rst
@@ -1,25 +1,749 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+Python/Linux Distribution Notes
+===============================
-Installation
-=============================================
+*Updated: 10 Nov 2017 23:30 GMT*
-Installing from the Source Code
-------------------------------------
-Get HAS seed code from the Linux Foundation Projects page
+This document exists to help bridge the gap between the Conductor python
+package and any downstream distribution. The steps outlined herein may
+be taken into consideration when creating an AT&T SWM package,
+Ubuntu/Debian package, Chef cookbook, or Ansible playbook.
-.. code-block:: bash
+Components
+----------
+
+Conductor consists of five services that work together:
+
+- **``conductor-api``**: An HTTP REST API
+- **``conductor-controller``**: Validation, translation, and
+ status/results
+- **``conductor-data``**: Inventory provider and service controller
+ gateway
+- **``conductor-solver``**: Processing and solution calculation
+- **``conductor-reservation``**: Reserves the suggested solution solved
+ by Solver component.
+
+Workflow
+--------
+
+- Deployment **plans** are created, viewed, and deleted via
+ ``conductor-api`` and its `REST API <doc/api/README.md>`__.
+- Included within each ``conductor-api`` plan request is a `Homing
+ Template <doc/template/README.md>`__.
+- Homing Templates describe a set of inventory demands and constraints
+ to be solved against.
+- ``conductor-api`` hands off all API requests to
+ ``conductor-controller`` for handling.
+- All deployment plans are assigned a unique identifier (UUID-4), which
+ can be used to check for solution status asynchronously. (Conductor
+ does not support callbacks at this time.)
+- ``conductor-controller`` ensures templates are well-formed and valid.
+ Errors and remediation are made visible through ``conductor-api``.
+ When running in debug mode, the API will also include a python
+ traceback in the response body, if available.
+- ``conductor-controller`` uses ``conductor-data`` to resolve demands
+ against a particular **inventory provider** (e.g., A&AI).
+- ``conductor-controller`` translates the template into a format
+ suitable for solving.
+- As each template is translated, ``conductor-solver`` begins working
+ on it.
+- ``conductor-solver`` uses ``conductor-data`` to resolve constraints
+ against a particular **service controller** (e.g., SDN-C).
+- ``conductor-solver`` determines the most suitable inventory to
+ recommend.
+- ``conductor-reservation`` attempts to reserve the solved solution in
+ SDN-GC
+
+**NOTE**: There is no Command Line Interface or Python API Library at
+this time.
+
+Pre-Flight and Pre-Installation Considerations
+----------------------------------------------
+
+AT&T Application Identifiers and Roles
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- App/Tool Name: ECOMP Conductor
+- MOTS Application ID: 26213
+- MechID: m04308
+- ECOMP Feature ID: F13704
+- PMT: 461306
+- UAM Role Name: Conductor Production Support
+- UAM Role id: 0000025248
+
+Root
+~~~~
+
+Be aware that some commands may require ``sudo``, depending on the
+account being used to perform the installation.
+
+Proxy
+~~~~~
+
+If line-of-sight to internet-facing repositories is permitted and
+available, set the following shell environment variables if AT&T proxy
+services are required:
+
+.. code:: bash
+
+ $ export http_proxy="http://one.proxy.att.com:8080/"
+ $ export https_proxy="http://one.proxy.att.com:8080/"
+
+Requirements
+~~~~~~~~~~~~
+
+Conductor is officially supported on `Ubuntu 14.04 LTS (Trusty
+Tahr) <http://releases.ubuntu.com/14.04/>`__, though it should also work
+on newer releases.
+
+Ensure the following Ubuntu packages are present, as they may not be
+included by default:
+
+- `libffi-dev <http://packages.ubuntu.com/trusty/libffi-dev>`__
+- `postgresql-server-dev-9.3 <http://packages.ubuntu.com/trusty/postgresql-server-dev-9.3>`__
+- `python2.7 <http://packages.ubuntu.com/trusty/python2.7>`__
+
+``conductor-api`` may be run as-is for development and test purposes.
+When used in a production environment, it is recommended that
+``conductor-api`` run under a multithreaded httpd service supporting
+`WSGI <https://www.wikipedia.org/wiki/Web_Server_Gateway_Interface>`__,
+tuned as appropriate.
+
+Configuration instructions for **apache2 httpd** and **nginx** are
+included herein. Respective package requirements are:
+
+- `apache2 <http://packages.ubuntu.com/trusty/apache2>`__ and
+ `libapache2-mod-wsgi <http://packages.ubuntu.com/trusty/libapache2-mod-wsgi>`__
+- `nginx <http://packages.ubuntu.com/trusty/nginx>`__ and
+ `uwsgi <http://packages.ubuntu.com/trusty/uwsgi>`__
+
+All Conductor services use AT&T `Music <https://github.com/att/music>`__
+for data storage/persistence and/or as a RPC transport mechanism.
+Consult the `Music Local Installation
+Guide <https://github.com/att/music/blob/master/README.md>`__ for
+installation/configuration steps.
+
+Networking
+~~~~~~~~~~
+
+All conductor services require line-of-sight access to all Music
+servers/ports.
+
+The ``conductor-api`` service uses TCP port 8091.
+
+Security
+~~~~~~~~
+
+``conductor-api`` is accessed via HTTP. SSL/TLS certificates and
+AuthN/AuthZ (e.g., AAF) are not supported at this time.
+
+Conductor makes use of plugins that act as gateways to *inventory
+providers* and *service controllers*. At present, two plugins are
+supported out-of-the-box: **A&AI** and **SDN-C**, respectively.
+
+A&AI requires two-way SSL/TLS. Certificates must be registered and
+whitelisted with A&AI. SDN-C uses HTTP Basic Authentication. Consult
+with each respective service for official information on how to obtain
+access.
+
+Storage
+~~~~~~~
+
+For a cloud environment in particular, it may be desirable to use a
+separate block storage device (e.g., an OpenStack Cinder volume) for
+logs, configuration, and other data persistence. In this way, it becomes
+a trivial matter to replace the entire VM if necessary, followed by
+reinstallation of the app and any supplemental configuration. Take this
+into consideration when setting various Conductor config options.
+
+Python Virtual Environments
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+At present, Conductor installation is only supported at the (upstream)
+python package level and not the (downstream) Ubuntu distribution or SWM
+package levels.
+
+To mitigate/eliminate the risk of introducing conflicts with other
+python applications or Ubuntu/SWM package dependencies, consider
+installing Conductor in a `python virtual
+environment <http://docs.python-guide.org/en/latest/dev/virtualenvs/>`__
+(or *venv* for short).
+
+Example venv-aware WSGI app configurations, sysvinit scripts, and
+upstart scripts can be found in the Conductor repository under
+`examples </examples/>`__.
+
+Python Package Dependencies
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Conductor is installed using the python ``pip`` command. ``pip`` uses a
+python project's `requirements manifest </requirements.txt>`__ to
+install all python module dependencies.
+
+**NOTE**: When line-of-sight access to a PyPI-compatible package index
+is not available, advance installation of Conductor's python package
+dependencies is required *before* installation.
+
+Other Production Environment Considerations
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+TBD. ``:)``
+
+Over time, considerations may include services such as:
+
+- AAF
+- AppMetrics
+- Introscope
+- Nagios
+- Splunk
+- UAM
+
+Installation and Configuration
+------------------------------
+
+**IMPORTANT**: Perform the steps in this section after *optionally*
+configuring and activating a python virtual environment.
+
+Installing From a PyPI Repository
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In ONAP, the ``conductor`` package can be found on \`\`\`\`.
+
+Installation is via the ``pip`` command. Here is an example ``pip.conf``
+file that uses both the internet and intranet-facing PyPI repositories:
+
+.. code:: ini
+
+ [global]
+ index = https://pypi.python.org/pypi
+ index-url = https://pypi.python.org/simple
+ extra-index-url =
+ trusted-host =
+
+Once the configuration is in place, installation is simple:
+
+.. code:: bash
+
+ $ pip install of-has
+
+To upgrade or downgrade, simply re-run ``pip install`` using the
+appropriate ``pip`` command line options.
+
+**NOTE**: Be sure proxy settings are in place if they're required to
+access ``pypi.python.org``.
+
+Installing From Source
+~~~~~~~~~~~~~~~~~~~~~~
+
+Conductor source in ONAP is maintained in
+https://gerrit.onap.org/r/optf/has.
+
+Clone the git repository, and then install from within the ``conductor``
+directory:
+
+.. code:: bash
$ git clone https://gerrit.onap.org/r/optf/has
+ Cloning into 'conductor'...
+ remote: Counting objects: 2291, done.
+ remote: Compressing objects: 88% (1918/2179)
+ remote: Compressing objects: 100% (2179/2179), done.
+ remote: Total 2291 (delta 1422), reused 0 (delta 0)
+ Receiving objects: 100% (2291/2291), 477.59 KiB | 0 bytes/s, done.
+ Resolving deltas: 100% (1422/1422), done.
+ $ cd conductor
+ $ pip install .
+
+The latest source can be pulled from ONAP at any time and reinstalled:
+
+.. code:: bash
+
+ $ git pull
+ $ pip install .
+
+Verifying Installation
+~~~~~~~~~~~~~~~~~~~~~~
+
+Each of the five Conductor services may be invoked with the ``--help``
+option:
+
+.. code:: bash
+
+ $ conductor-api -- --help
+ $ conductor-controller --help
+ $ conductor-data --help
+ $ conductor-solver --help
+ $ conductor-reservation --help
+
+**NOTE**: The ``conductor-api`` command is deliberate. ``--`` is used as
+as separator between the arguments used to start the WSGI server and the
+arguments passed to the WSGI application.
+
+Post-Flight and Post-Installation Considerations
+------------------------------------------------
+
+User and Group
+~~~~~~~~~~~~~~
+
+It's good practice to create an unprivileged account (e.g., a user/group
+named ``conductor``) and run all Conductor services as that user:
+
+.. code:: bash
+
+ $ sudo addgroup --system conductor
+ $ sudo adduser --system --home /var/lib/conductor --ingroup conductor --no-create-home --shell /bin/false conductor
+
+SSL/TLS Certificates
+~~~~~~~~~~~~~~~~~~~~
+
+The A&AI Inventory Provider Plugin requiries two-way SSL/TLS. After
+provisioning a certificate per A&AI guidelines, it will be necessary to
+securely install the certificate, key, and certificate authority bundle.
+
+When running conductor services as ``conductor:conductor``
+(recommended), consider co-locating all of these files under the
+configuration directory. For example, when using ``/etc/conductor``:
+
+.. code:: bash
+
+ $ # Certificate files (crt extension, 644 permissions)
+ $ sudo mkdir /etc/conductor/ssl/certs
+ $ # Private Certificate Key files (key extension, 640 permissions)
+ $ sudo mkdir /etc/conductor/ssl/private
+ $ # Certificate Authority (CA) Bundles (crt extension, 644 permissions)
+ $ sudo mkdir /etc/conductor/ssl/ca-certificates
+ $ # Add files to newly created directories, then set ownership
+ $ sudo chmod -R conductor:conductor /etc/conductor/ssl
+
+For a hypothetical domain name ``imacculate.client.research.att.com``,
+example filenames could be as follows:
+
+.. code:: bash
+
+ $ find ssl -type f -printf '%M %u:%g %f\n'
+ -rw-r----- conductor:conductor imacculate.client.research.att.com.key
+ -rw-r--r-- conductor:conductor Symantec_Class_3_Secure_Server_CA.crt
+ -rw-r--r-- conductor:conductor imacculate.client.research.att.com.crt
+
+When running conductor services as ``root``, consider these existing
+Ubuntu filesystem locations for SSL/TLS files:
+
+**Certificate** files (``crt`` extension) are typically stored in
+``/etc/ssl/certs`` with ``root:root`` ownership and 644 permissions.
+
+**Private Certificate Key** files (``key`` extension) are typically
+stored in ``/etc/ssl/private`` with ``root:root`` ownership and 640
+permissions.
+
+**Certificate Authority (CA) Bundles** (``crt`` extension) are typically
+stored in ``/usr/share/ca-certificates/conductor`` with ``root:root``
+ownership, and 644 permissions. These Bundle files are then symlinked
+within ``/etc/ssl/certs`` using equivalent filenames, a ``pem``
+extension, and ``root:root`` ownership.
+
+**NOTE**: LUKS (Linux Unified Key Setup) is not supported by Conductor
+at this time.
+
+Configuration
+~~~~~~~~~~~~~
+
+Configuration files are located in ``etc/conductor`` relative to the
+python environment Conductor is installed in.
+
+To generate a sample configuration file, change to the directory just
+above where ``etc/conductor`` is located (e.g., ``/`` for the default
+environment, or the virtual environment root directory). Then:
+
+.. code:: bash
+
+ $ oslo-config-generator --config-file=etc/conductor/conductor-config-generator.conf
+
+This will generate ``etc/conductor/conductor.conf.sample``.
+
+Because the configuration directory and files will include credentials,
+consider removing world permissions:
+
+.. code:: bash
+
+ $ find etc/conductor -type f -exec chmod 640 {} +
+ $ find etc/conductor -type d -exec chmod 750 {} +
+
+The sample config may then be copied and edited. Be sure to backup any
+previous ``conductor.conf`` if necessary.
+
+.. code:: bash
+
+ $ cd etc/conductor
+ $ cp -p conductor.conf.sample conductor.conf
+
+``conductor.conf`` is fully annotated with descriptions of all options.
+Defaults are included, with all options commented out. Conductor will
+use defaults even if an option is not present in the file. To change an
+option, simply uncomment it and edit its value.
+
+With the exception of the ``DEFAULT`` section, it's best to restart the
+Conductor services after making any config changes. In some cases, only
+one particular service actually needs to be restarted. When in doubt,
+however, it's best to restart all of them.
+
+A few options in particular warrant special attention:
+
+::
+
+ [DEFAULT]
+
+ # If set to true, the logging level will be set to DEBUG instead of the default
+ # INFO level. (boolean value)
+ # Note: This option can be changed without restarting.
+ #debug = false
+
+For more verbose logging across all Conductor services, set ``debug`` to
+true.
+
+::
+
+ [aai]
+
+ # Base URL for A&AI, up to and not including the version, and without a
+ # trailing slash. (string value)
+ #server_url = https://controller:8443/aai
+
+ # SSL/TLS certificate file in pem format. This certificate must be registered
+ # with the A&AI endpoint. (string value)
+ #certificate_file = certificate.pem
+
+ # Private Certificate Key file in pem format. (string value)
+ #certificate_key_file = certificate_key.pem
+
+ # Certificate Authority Bundle file in pem format. Must contain the appropriate
+ # trust chain for the Certificate file. (string value)
+ #certificate_authority_bundle_file = certificate_authority_bundle.pem
+
+Set ``server_url`` to the A&AI server URL, to but not including the
+version, omitting any trailing slash. Conductor supports A&AI API v9 at
+a minimum.
+
+Set the ``certificate`` prefixed keys to the appropriate SSL/TLS-related
+files.
+
+**IMPORTANT**: The A&AI server may have a mismatched host/domain name
+and SSL/TLS certificate. In such cases, certificate verification will
+fail. To mitigate this, ``certificate_authority_bundle_file`` may be set
+to an empty value. While Conductor normally requires a CA Bundle
+(otherwise why bother using SSL/TLS), this requirement has been
+temporarily relaxed so that development and testing may continue.
+
+::
+
+ [messaging_server]
+
+ # Log debug messages. Default value is False. (boolean value)
+ #debug = false
+
+When the ``DEFAULT`` section's ``debug`` option is ``true``, set this
+section's ``debug`` option to ``true`` to enable detailed Conductor-side
+RPC-over-Music debug messages.
+
+Be aware, it is voluminous. "You have been warned." ``:)``
+
+::
+
+ [music_api]
+
+ # List of hostnames (round-robin access) (list value)
+ #hostnames = localhost
+
+ # Log debug messages. Default value is False. (boolean value)
+ #debug = false
+
+Set ``hostnames`` to match wherever the Music REST API is being hosted
+(wherever Apache Tomcat and ``MUSIC.war`` are located).
+
+When the ``DEFAULT`` section's ``debug`` option is ``true``, set this
+section's ``debug`` option to ``true`` to enable detailed Conductor-side
+MUSIC API debug messages.
+
+The previous comment around the volume of log lines applies even more so
+here. (Srsly. We're not kidding.)
+
+**IMPORTANT**: Conductor does not presently use Music's atomic
+consistency features due to concern around lock creation/acquisition.
+Instead, Conductor uses eventual consistency. For this reason,
+consistency issues may occur when using Music in a multi-server, High
+Availability configuration.
+
+::
+
+ [sdnc]
+
+ # Base URL for SDN-C. (string value)
+ #server_url = https://controller:8443/restconf
+
+ # Basic Authentication Username (string value)
+ #username = <None>
+
+ # Basic Authentication Password (string value)
+ #password = <None>
+
+Set ``server_url`` to the SDN-C server URL, omitting any trailing slash.
+
+Set ``username`` and ``password`` to the appropriate values as directed
+by SDN-C.
+
+Running for the First Time
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Each Conductor component may be run interactively. In this case, the
+user does not necessarily matter.
+
+When running interactively, it is suggested to run each command in a
+separate terminal session and in the following order:
+
+.. code:: bash
+
+ conductor-data --config-file=/etc/conductor/conductor.conf
+ conductor-controller --config-file=/etc/conductor/conductor.conf
+ conductor-solver --config-file=/etc/conductor/conductor.conf
+ conductor-reservation --config-file=/etc/conductor/conductor.conf
+ conductor-api --port=8091 -- --config-file=/etc/conductor/conductor.conf
+
+Optionally, use an application like
+`screen <http://packages.ubuntu.com/trusty/screen>`__ to nest all five
+terminal sessions within one detachable session. (This is also the same
+package used by
+`DevStack <https://docs.openstack.org/developer/devstack/>`__.)
+
+To verify that ``conductor-api`` can be reached, browse to
+``http://HOST:8091/``, where HOST is the hostname ``conductor-api`` is
+running on. No AuthN/AuthZ is required at this time. Depending on
+network considerations, it may be necessary to use a command like
+``wget`` instead of a desktop browser.
+
+The response should look similar to:
+
+.. code:: json
+
+ {
+ "versions": {
+ "values": [
+ {
+ "status": "development",
+ "updated": "2016-11-01T00:00:00Z",
+ "media-types": [
+ {
+ "base": "application/json",
+ "type": "application/vnd.ecomp.homing-v1+json"
+ }
+ ],
+ "id": "v1",
+ "links": [
+ {
+ "href": "http://127.0.0.1:8091/v1",
+ "rel": "self"
+ },
+ {
+ "href": "http://conductor.research.att.com/",
+ "type": "text/html",
+ "rel": "describedby"
+ }
+ ]
+ }
+ ]
+ }
+ }
+
+Sample API Calls and Homing Templates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A `Postman <http://getpostman.com/>`__ collection illustrating sample
+requests is available upon request. The collection will also be added in
+a future revision.
+
+`Sample homing templates </doc/examples/README.md>`__ are also
+available.
+
+Ubuntu Service Scripts
+~~~~~~~~~~~~~~~~~~~~~~
+
+Ubuntu sysvinit (init.d) and upstart (init) scripts are typically
+installed at the Ubuntu package level. Since there is no such packaging
+at this time, example scripts have been provided in the repository.
+
+To install, place all Conductor `sysvinit
+scripts </examples/distribution/ubuntu/init.d>`__ in ``/etc/init.d``,
+and all `upstart scripts </examples/distribution/ubuntu/init>`__ in
+``/etc/init``.
+
+Set file permissions:
+
+.. code:: bash
+
+ $ sudo chmod 644 /etc/init/conductor*
+ $ sudo chmod 755 /etc/init.d/conductor*
+
+If a python virtual environment is being used, edit each
+``/etc/init/conductor*`` and ``/etc/init.d/conductor*`` prefixed file so
+that ``PYTHON_HOME`` is set to the python virtual environment root
+directory.
+
+Next, enable the scripts:
+
+.. code:: bash
+
+ $ sudo update-rc.d conductor-api defaults
+ $ sudo update-rc.d conductor-controller defaults
+ $ sudo update-rc.d conductor-data defaults
+ $ sudo update-rc.d conductor-solver defaults
+ $ sudo update-rc.d conductor-reservation defaults
+ $ sudo initctl reload-configuration
+
+Conductor components may now be started/stopped like any other Ubuntu
+service, for example:
+
+.. code:: bash
+
+ $ sudo service conductor-api start
+ $ sudo service conductor-api status
+ $ sudo service conductor-api restart
+ $ sudo service conductor-api stop
+
+Conductor service scripts automatically create directories for ``log``,
+``lock``, ``run``, ``lib``, and ``log`` files, e.g.,
+``/var/log/conductor`` and so on.
+
+Log File Rotation
+~~~~~~~~~~~~~~~~~
+
+Sample ``logrotate.d`` configuration files have been provided in the
+repository.
+
+To install, place all Conductor `logrotate
+files </examples/distribution/ubuntu/logrotate.d>`__ in
+``/etc/logrotate.d``.
+
+Set file ownership and permissions:
+
+.. code:: bash
+
+ $ sudo chown root:root /etc/logrotate.d/conductor*
+ $ sudo chmod 644 /etc/logrotate.d/conductor*
+
+``logrotate.d`` automatically recognizes new files at the next log
+rotation opportunity and does not require restarting.
+
+Running conductor-api Under apache2 httpd and mod\_wsgi
+-------------------------------------------------------
+
+Sample configuration files have been provided in the repository.
+
+These instructions presume a ``conductor`` user exists. See the
+**Service Scripts** section for details.
+
+First, set up a few directories:
+
+.. code:: bash
+
+ $ sudo mkdir -p /var/www/conductor
+ $ sudo mkdir /var/log/apache2/conductor
+
+To install, place the Conductor `WSGI application
+file </conductor/api/app.wsgi>`__ in ``/var/www/conductor``.
+
+Set the owner/group of both directories/files to ``conductor``:
+
+.. code:: bash
+
+ $ sudo chown -R conductor:conductor /var/log/apache2/conductor /var/www/conductor
+
+Next, place the Conductor `apache2 httpd site config
+file </examples/apache2/conductor.conf>`__ in
+``/etc/apache2/sites-available``.
+
+Set the owner/group to ``root``:
+
+.. code:: bash
+
+ $ sudo chown -R root:root /etc/apache2/sites-available/conductor.conf
+
+If Conductor was installed in a python virtual environment, append
+``python-home=VENV`` to ``WSGIDaemonProcess``, where ``VENV`` is the
+python virtual environment root directory.
+
+**IMPORTANT**: Before proceeding, disable the ``conductor-api`` sysvinit
+and upstart services, as the REST API will now be handled by apache2
+httpd. Otherwise there will be a port conflict, and you will be sad.
+
+Enable the Conductor site, ensure the configuration syntax is valid, and
+gracefully restart apache2 httpd.
+
+.. code:: bash
+
+ $ sudo a2ensite conductor
+ $ sudo apachectl -t
+ Syntax OK
+ $ sudo apachectl graceful
+
+To disable the Conductor site, run ``sudo a2dissite conductor``, then
+gracefully restart once again. Optionally, re-enable the
+``conductor-api`` sysvinit and upstart services.
+
+Running conductor-api Under nginx and uWSGI
+-------------------------------------------
+
+Sample configuration files have been provided in the repository.
+
+These instructions presume a ``conductor`` user exists. See the
+**Service Scripts** section for details.
+
+To install, place the Conductor `nginx config
+files </examples/nginx/>`__ and `WSGI application
+file </conductor/api/app.wsgi>`__ in ``/etc/nginx`` (taking care to
+backup any prior configuration files). It may be desirable to
+incorporate Conductor's ``nginx.conf`` into the existing config.
+
+Rename ``app.wsgi`` to ``conductor.wsgi``:
+
+.. code:: bash
+
+ $ cd /etc/nginx
+ $ sudo mv app.wsgi conductor.wsgi
+
+In ``nginx.conf``, set ``CONDUCTOR_API_FQDN`` to the server name.
+
+**IMPORTANT**: Before proceeding, disable the ``conductor-api`` sysvinit
+and upstart services, as the REST API will now be handled by nginx.
+Otherwise there will be a port conflict, and you will be sad.
+
+Restart nginx:
+
+.. code:: bash
+
+ $ sudo service nginx restart
+
+Then, run ``conductor-api`` under nginx using uWSGI:
+
+.. code:: bash
+
+ $ sudo uwsgi -s /tmp/uwsgi.sock --chmod-socket=777 --wsgi-file /etc/nginx/conductor.wsgi --callable application --set port=8091
+
+To use a python virtual environment, add ``--venv VENV`` to the
+``uwsgi`` command, where ``VENV`` is the python virtual environment root
+directory.
+
+Uninstallation
+--------------
+
+Activate a virtual environment (venv) first, if necessary, then
+uninstall with:
+
+.. code:: bash
+
+ $ pip uninstall ecomp-conductor
-Use python virtual environment (https://virtualenv.pypa.io/en/stable/) to create and manage libraries and dependencies for HAS project.
- $ virtualenv {virtual_environment_location}
-
- $ source {virtual_environemtn_location}/bin/activate
+Remove any previously made configuration file changes, user accounts,
+Ubuntu/SWM packages, and other settings as needed.
-Inside of /has/conductor folder, run the following commands:
- $ python setup.py install
-
- $ pip install -e .
+Bug Reporting and Feedback
+--------------------------
-In {virtual_environment_location}/bin folder, you should see the five components of HAS/Conductor project
-conductor-api,conductor-controller, conductor-solver, conductor-reservation, conductor-data
+... is encouraged. Please raise an issue at:
+https://jira.onap.org/projects/OPTFRA/summary
diff --git a/docs/sections/release-notes.rst b/docs/sections/release-notes.rst
index fe5b98a..6ac990f 100644
--- a/docs/sections/release-notes.rst
+++ b/docs/sections/release-notes.rst
@@ -7,6 +7,128 @@ Release Notes
=============
+Version: 1.2.4
+--------------
+
+:Release Date: 2018-11-30 (R3 Casablanca Release)
+
+**New Features**
+
+A summary of features includes:
+
+* Security enhancements, including integration with AAF to implement access controls on
+ OSDF and HAS northbound interfaces
+* Integration with SMS
+* Platform Maturity Level 1
+ * ~50%+ unit test coverage
+* Hardware Platform Awareness Enhancements
+ 1) Added support for SRIOV-NIC and directives to assist the orchestrator
+ 2) Select the best candidate across all cloud region based on HPA score.
+ 3) HPA metrics using prometheus
+
+The Casablanca release for OOF delivered the following Epics.
+
+ * OPTFRA-106 - OOF Functional Testing Related User Stories and Tasks
+ * OPTFRA-266 - Integrate OOF with Certificate and Secret Management Service (CSM)
+ * OPTFRA-267 - OOF - HPA Enhancements
+ * OPTFRA-269 - This epic covers the work to get the OOF development platform ready for Casablanca development
+ * OPTFRA-270 - This epic captures stories related to maintaining current S3P levels of the project as new functional requirements are supported
+ * OPTFRA-271 - This epic spans the work to progress further from the current security level
+ * OPTFRA-272 - This epic spans the work to progress further from the current Performance level
+ * OPTFRA-273 - This epic spans the work to progress further from the current Manageability level
+ * OPTFRA-274 - This epic spans the work to progress further from the current Usability level
+ * OPTFRA-275 - This epic spans the stories to improve deployability of services
+ * OPTFRA-276 - Implementing a POC for 5G SON Optimization
+ * OPTFRA-298 - Should be able to orchestrate Cross Domain and Cross Layer VPN
+
+**Bug Fixes**
+
+ * OPTFRA-205 - Generated conductor.conf missing configurations
+ * OPTFRA-210 - Onboarding to Music error
+ * OPTFRA-211 - Error solution for HPA
+ * OPTFRA-249 - OOF does not return serviceResourceId in homing solution
+ * OPTFRA-259 - Fix intermittent failure of HAS CSIT job
+ * OPTFRA-264 - oof-has-zookeeper image pull error
+ * OPTFRA-305 - Analyze OOM health check failure
+ * OPTFRA-306 - OOF-Homing fails health check in HEAT deployment
+ * OPTFRA-321 - Fix osdf functional tests script to fix builder failures
+ * OPTFRA-323 - Cannot resolve multiple policies with the same 'hpa-feature' name
+ * OPTFRA-325 - spelling mistake
+ * OPTFRA-326 - hyperlink links are missing
+ * OPTFRA-335 - Making flavors an optional field in HAS candidate object
+ * OPTFRA-336 - OOM oof deployment failure on missing image - optf-osdf:1.2.0
+ * OPTFRA-338 - Create authentication key for OOF-VFC integration
+ * OPTFRA-341 - Cannot support multiple candidates for one feature in one flavor
+ * OPTFRA-344 - Fix broken HPA CSIT test
+ * OPTFRA-354 - Generalize the logic to process Optimization policy
+ * OPTFRA-358 - Tox fails with the AttributeError: 'module' object has no attribute 'MUSIC_API'
+ * OPTFRA-359 - Create index on plans table for HAS
+ * OPTFRA-362 - AAF Authentication CSIT issues
+ * OPTFRA-365 - Fix Jenkins jobs for CMSO
+ * OPTFRA-366 - HAS CSIT issues
+ * OPTFRA-370 - Update the version of the OSDF and HAS images
+ * OPTFRA-374 - 'ModelCustomizationName' should be optional for the request
+ * OPTFRA-375 - SO-OSDF request is failing without modelCustomizationName value
+ * OPTFRA-384 - Generate and Validate Policy for vFW testing
+ * OPTFRA-385 - resourceModelName is sent in place of resourceModuleName
+ * OPTFRA-388 - Fix OOF to handle sdnr/configdb api changes
+ * OPTFRA-395 - CMSO - Fix security violations and increment version
+
+
+**Known Issues**
+
+These are all issues with fix version: Casablanca Release and status: open, in-progress, reopened
+
+ * OPTFRA-401 - Need flavor id while launching vm
+ * OPTFRA-398 - Add documentation for OOF-VFC interaction
+ * OPTFRA-393 - CMSO Implement code coverage
+ * OPTFRA-383 - OOF 7 of 8 pods are not starting in a clean master 20181029
+ * OPTFRA-368 - Remove Beijing repositories from CLM jenkins
+ * OPTFRA-337 - Document new transitions in HAS states
+ * OPTFRA-331 - Role-based access controls to OOF
+ * OPTFRA-329 - role based access control for OSDF-Policy interface
+ * OPTFRA-316 - Clean up hard-coded references to south bound dependencies
+ * OPTFRA-314 - Create user stories for documenting new APIs defined for OOF
+ * OPTFRA-304 - Code cleaning
+ * OPTFRA-300 - Fix Heat deployment scripts for OOF
+ * OPTFRA-298 - Should be able to orchestrate Cross Domain and Cross Layer VPN
+ * OPTFRA-297 - OOF Should support Cross Domain and Cross Layer VPN
+ * OPTFRA-296 - Support SON (PCI) optimization using OSDF
+ * OPTFRA-293 - Implement encryption for all OSDF internal and external communication
+ * OPTFRA-292 - Implement encryption for all HAS internal and external communication
+ * OPTFRA-279 - Policy-based capacity check enhancements
+ * OPTFRA-276 - Implementing a POC for 5G SON Optimization
+ * OPTFRA-274 - This epic spans the work to progress further from the current Usability level
+ * OPTFRA-273 - This epic spans the work to progress further from the current Manageability level
+ * OPTFRA-272 - This epic spans the work to progress further from the current Performance level
+ * OPTFRA-271 - This epic spans the work to progress further from the current security level
+ * OPTFRA-270 - This epic captures stories related to maintaining current S3P levels of the project as new functional requirements are supported
+ * OPTFRA-269 - This epic covers the work to get the OOF development platform ready for Casablanca development
+ * OPTFRA-268 - OOF - project specific enhancements
+ * OPTFRA-266 - Integrate OOF with Certificate and Secret Management Service (CSM)
+ * OPTFRA-262 - ReadTheDoc - update for R3
+ * OPTFRA-260 - Testing vCPE flows with multiple clouds
+ * OPTFRA-240 - Driving Superior Isolation for Tiered Services using Resource Reservation -- Optimization Policies for Residential vCPE
+ * OPTFRA-223 - On boarding and testing AAF certificates for OSDF
+
+**Security Issues**
+
+OPTFRA code has been formally scanned during build time using NexusIQ and no Critical vulnerability was found.
+
+**Quick Links**:
+ - `OPTFRA project page <https://wiki.onap.org/display/DW/Optimization+Framework+Project>`_
+
+ - `Passing Badge information for OPTFRA <https://bestpractices.coreinfrastructure.org/en/projects/1720>`_
+
+**Upgrade Notes**
+To upgrade, run docker container or install from source, See Distribution page
+
+**Deprecation Notes**
+No features deprecated in this release
+
+**Other**
+None
+
Version: 1.1.1
--------------