Add cmso-sonar to generate jacoco files

Issue-ID: OPTFRA-474
Change-Id: I0a1cd03708fda09255ada655df727acfa7498d09
Signed-off-by: Jerry Flood <jflood@att.com>

23 files changed, 1262 insertions, 0 deletions

diff --git a/cmso-sonar/docker/integration/cmso-optimizer/etc/config/cadi.properties b/cmso-sonar/docker/integration/cmso-optimizer/etc/config/cadi.properties
new file mode 100644
index 0000000..9a6b91c
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-optimizer/etc/config/cadi.properties
@@ -0,0 +1,21 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a 
+# copy of the License at
+# 
+#        http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express 
+# or implied. See the License for the specific language governing 
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+# 
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
diff --git a/cmso-sonar/docker/integration/cmso-optimizer/etc/config/liquibase.properties b/cmso-sonar/docker/integration/cmso-optimizer/etc/config/liquibase.properties
new file mode 100644
index 0000000..fcda8bd
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-optimizer/etc/config/liquibase.properties
@@ -0,0 +1,43 @@
+###
+# Copyright (c) 2017-2019 AT&T Intellectual Property. 
+# Modifications Copyright © 2018 IBM. 
+#  
+# Licensed under the Apache License, Version 2.0 (the "License"); 
+# you may not use this file except in compliance with the License. 
+# You may obtain a copy of the License at 
+#  
+#         http://www.apache.org/licenses/LICENSE-2.0 
+#  
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+# See the License for the specific language governing permissions and 
+# limitations under the License. 
+#  
+#  
+# Unless otherwise specified, all documentation contained herein is licensed 
+# under the Creative Commons License, Attribution 4.0 Intl. (the ââ?¬Å"Licenseââ?¬); 
+# you may not use this documentation except in compliance with the License. 
+# You may obtain a copy of the License at 
+#  
+#         https://creativecommons.org/licenses/by/4.0/ 
+#  
+# Unless required by applicable law or agreed to in writing, documentation 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+# See the License for the specific language governing permissions and 
+# limitations under the License.
+###
+spring.datasource.jdbcUrl=jdbc:mariadb://${DB_HOST}:3306/optimizer?createDatabaseIfNotExist=true
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.datasource.username=root
+spring.datasource.password=beer
+
+spring.datasource.initialize=false
+spring.datasource.tomcat.max-wait=10000
+spring.datasource.tomcat.initialSize=5
+spring.datasource.tomcat.max-active=25
+spring.datasource.tomcat.test-on-borrow=true
+
+
+changeLogFile=optimizer-liquibase-changeLog.xml
diff --git a/cmso-sonar/docker/integration/cmso-optimizer/etc/config/optimizer.properties b/cmso-sonar/docker/integration/cmso-optimizer/etc/config/optimizer.properties
new file mode 100644
index 0000000..babc736
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-optimizer/etc/config/optimizer.properties
@@ -0,0 +1,54 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a 
+# copy of the License at
+# 
+#        http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express 
+# or implied. See the License for the specific language governing 
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+# 
+#-------------------------------------------------------------------------------
+###
+
+### MySQL DB.
+spring.datasource.url=jdbc:mariadb://${DB_HOST}:3306/optimizer
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.datasource.username=root
+spring.datasource.password=beer
+cmso.database.password=beer
+
+spring.datasource.initialize=false
+spring.datasource.tomcat.max-wait=10000
+spring.datasource.tomcat.initialSize=5
+spring.datasource.tomcat.max-active=25
+spring.datasource.tomcat.test-on-borrow=true
+
+spring.jpa.show-sql=true
+spring.jpa.hibernate.ddl-auto=none
+spring.jpa.hibernate.naming.strategy=org.hibernate.cfg.EJB3NamingStrategy
+spring.jpa.database-platform=org.hibernate.dialect.MySQL5InnoDBDialect
+spring.jpa.hibernate.naming.physical-strategy=org.hibernate.boot.model.naming.PhysicalNamingStrategyStandardImpl
+spring.jpa.hibernate.id.new_generator_mappings=false
+hibernate.id.new_generator_mappings=false
+
+logging.level.org.hibernate.SQL=WARN
+
+logging.level.org.hibernate=WARN
+
+
+cmso.topology.create.request.url=http://${TOPOLOGY_HOST}:7998/topology/v1/current
+cmso.ticket.create.request.url=http://${TICKETMGT_HOST}:7999/ticketmgt/v1/activetickets
+cmso.local.policy.folder=data/policies
+
+cmso.minizinc.command.exe=/mz-dist/bin/minizinc
+cmso.minizinc.command.solver=OSICBC
+cmso.minizinc.command.timelimit=60000
+cmso.minizinc.command.mzn=scripts/minizinc/generic_attributes.mzn
diff --git a/cmso-sonar/docker/integration/cmso-optimizer/etc/startDbinitService.sh b/cmso-sonar/docker/integration/cmso-optimizer/etc/startDbinitService.sh
new file mode 100755
index 0000000..a7cd3ff
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-optimizer/etc/startDbinitService.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+apt update
+apt install netcat --assume-yes
+COUNTER=30
+while [  $COUNTER -gt 0  ]; do
+    nc -z ${DB_HOST} 3306
+    if [ $? -eq 0 ]; then
+        let COUNTER=0
+    else
+    	let COUNTER=COUNTER-1 
+	sleep 10
+    fi
+done
+
+echo "VM_ARGS="${VM_ARGS}
+
+java -Djava.security.egd=file:/dev/./urandom  ${VM_ARGS} -Xms256m -Xmx1024m  -jar  ./app.jar  --spring.config.location=/share/etc/config/liquibase.properties
diff --git a/cmso-sonar/docker/integration/cmso-optimizer/etc/startJacocoService.sh b/cmso-sonar/docker/integration/cmso-optimizer/etc/startJacocoService.sh
new file mode 100644
index 0000000..0db6f1f
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-optimizer/etc/startJacocoService.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+apt update
+apt install wget
+apt install unzip  --assume-yes
+wget http://repo1.maven.org/maven2/org/jacoco/org.jacoco.agent/0.8.2/org.jacoco.agent-0.8.2.jar
+unzip org.jacoco.agent-0.8.2.jar
+cp org.jacoco.agent-0.8.2/jacocoagent.jar .
+ls -l
+
+VM_ARGS="${VM_ARGS} -javaagent:./jacocoagent.jar=destfile=/share/logs/jacoco.exec,dumponexit=true,jmx=true,append=true,output=file,includes=org.onap.optf.cmso.*"
+
+echo "VM_ARGS=${VM_ARGS}"
+
+java -Djava.security.egd=file:/dev/./urandom -Xms256m -Xmx1024m ${VM_ARGS} -jar ./app.jar
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/config/cadi.properties b/cmso-sonar/docker/integration/cmso-service/etc/config/cadi.properties
new file mode 100644
index 0000000..9a6b91c
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/config/cadi.properties
@@ -0,0 +1,21 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a 
+# copy of the License at
+# 
+#        http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express 
+# or implied. See the License for the specific language governing 
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+# 
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/config/cmso.properties b/cmso-sonar/docker/integration/cmso-service/etc/config/cmso.properties
new file mode 100644
index 0000000..3602577
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/config/cmso.properties
@@ -0,0 +1,104 @@
+
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2018 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# 
+# 
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the ā??Licenseā?);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         https://creativecommons.org/licenses/by/4.0/
+# 
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
+###
+
+### MySQL DB.
+spring.datasource.url=jdbc:mariadb://${DB_HOST}:3306/cmso
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.datasource.username=root
+spring.datasource.password=beer
+cmso.database.password=beer
+
+spring.datasource.initialize=false
+spring.datasource.tomcat.max-wait=10000
+spring.datasource.tomcat.initialSize=5
+spring.datasource.tomcat.max-active=25
+spring.datasource.tomcat.test-on-borrow=true
+
+spring.jpa.show-sql=true
+spring.jpa.hibernate.ddl-auto=none
+spring.jpa.hibernate.naming.strategy=org.hibernate.cfg.EJB3NamingStrategy
+spring.jpa.database-platform=org.hibernate.dialect.MySQL5InnoDBDialect
+spring.jpa.hibernate.naming.physical-strategy=org.hibernate.boot.model.naming.PhysicalNamingStrategyStandardImpl
+spring.jpa.hibernate.id.new_generator_mappings=false
+hibernate.id.new_generator_mappings=false
+
+logging.level.org.hibernate.SQL=WARN
+
+logging.level.org.hibernate=WARN
+
+#
+cmso.aaf.enabled=false
+
+# Enable swagger - Enable in development and test only
+cmso.swagger.enabled=true
+
+# Enable schedule immediate to be dispatched without ticket approvals
+# Has no effect when in vTM loopback mode as always approved.
+cmso.cm.dispatch.immediate.enabled = true
+
+# NUmber of seconds between sniro dispatch jobs
+cmso.optimizer.job.interval.ms=10000
+
+# NUmber of seconds between change management cmso polling jobs
+# Controls frequenct of polling to the ChangeManagementScheduler table...
+cmso.cm.polling.job.interval.ms=10000
+# How many management cmso polling intervals to look ahead to dispatch
+# (To account for possible latency of the polling job)
+cmso.cm.polling.job.lookahead.intervals=5
+# Lead time before event time to enable dispatcher to 
+# test that it is safe to dispatch (i.e. meeting reminder lead time)
+cmso.cm.dispatcher.lead.time.ms=5000
+# Lead time to prepare and call VID to dispatch work to MSO
+# Includes latency from VID call to the start of the workflow
+cmso.cm.dispatch.lead.time.ms=1000
+
+# Interval between polling to check status of schedules in Notifications Initiated status
+cmso.status.job.interval.ms=60000
+
+org.quartz.jobStore.class=org.quartz.simpl.RAMJobStore
+
+loopback.mso.requestId=dummy123
+
+so.polling.interval.ms=10000
+#mso.user=cmso@onap.org
+#mso.pass=enc:bfodXf8qRfCqMvlxVBYNWQ==
+
+## loopback settings
+so.url=http://localhost:8080/cmso/v1/loopbacktest/onap/so/infra/orchestrationRequests/v7
+so.user=cmso@onap.org
+so.pass=enc:bfodXf8qRfCqMvlxVBYNWQ==
+
+mechid.user=cmso@onap.org
+mechid.pass=enc:bfodXf8qRfCqMvlxVBYNWQ==
+
+cmso.dispatch.url=http://localhost:8089
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/config/liquibase.properties b/cmso-sonar/docker/integration/cmso-service/etc/config/liquibase.properties
new file mode 100644
index 0000000..b8c850e
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/config/liquibase.properties
@@ -0,0 +1,54 @@
+###
+# Copyright © 2017-2018 AT&T Intellectual Property. 
+# Modifications Copyright © 2018 IBM. 
+#  
+# Licensed under the Apache License, Version 2.0 (the "License"); 
+# you may not use this file except in compliance with the License. 
+# You may obtain a copy of the License at 
+#  
+#         http://www.apache.org/licenses/LICENSE-2.0 
+#  
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+# See the License for the specific language governing permissions and 
+# limitations under the License. 
+#  
+#  
+# Unless otherwise specified, all documentation contained herein is licensed 
+# under the Creative Commons License, Attribution 4.0 Intl. (the ââ?¬Å"Licenseââ?¬); 
+# you may not use this documentation except in compliance with the License. 
+# You may obtain a copy of the License at 
+#  
+#         https://creativecommons.org/licenses/by/4.0/ 
+#  
+# Unless required by applicable law or agreed to in writing, documentation 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
+# See the License for the specific language governing permissions and 
+# limitations under the License.
+###
+spring.datasource.jdbcUrl=jdbc:mariadb://${DB_HOST}:3306/cmso?createDatabaseIfNotExist=true
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.datasource.username=root
+spring.datasource.password=beer
+
+spring.datasource.initialize=false
+spring.datasource.tomcat.max-wait=10000
+spring.datasource.tomcat.initialSize=5
+spring.datasource.tomcat.max-active=25
+spring.datasource.tomcat.test-on-borrow=true
+
+
+#changeLogFile=calendar-liquibase-changeLog.xml
+changeLogFile=cmso-liquibase-changeLog.xml
+
+
+#spring.main.web-environment=false
+#outputChangeLogFile=src/main/resources/cmso-output-changelog.xml
+#url=jdbc:mariadb://localhost:3306/calendar
+#url=jdbc:mysql://localhost:3306/cmso
+#username=root
+#password=root
+#driver=org.mariadb.jdbc.Driver
+#driver=com.mysql.jdbc.Driver
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/config/optimizer.properties b/cmso-sonar/docker/integration/cmso-service/etc/config/optimizer.properties
new file mode 100644
index 0000000..f0d4651
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/config/optimizer.properties
@@ -0,0 +1,34 @@
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2018 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# 
+# 
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the ā??Licenseā?);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         https://creativecommons.org/licenses/by/4.0/
+# 
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
+
+cmso.optimizer.request.url=${OPTIMIZER_URL}
+cmso.optimizer.status.url=${OPTIMIZER_URL}
+cmso.optimizer.health.url=${OPTIMIZER_HEALTH_URL}
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/config/ticketmgt.properties b/cmso-sonar/docker/integration/cmso-service/etc/config/ticketmgt.properties
new file mode 100644
index 0000000..bfdaec6
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/config/ticketmgt.properties
@@ -0,0 +1,38 @@
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2018 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# 
+# 
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the ā??Licenseā?);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         https://creativecommons.org/licenses/by/4.0/
+# 
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
+
+tm.vnfs.per.ticket=1
+tm.getPath=http://localhost:8080/cmso/v1/tm/getChangeRecord
+tm.createPath=http://localhost:8080/cmso/v1/tm/createChangeRecord
+tm.closePath=http://localhost:8080/cmso/v1/tm/closeCancelChangeRecord
+tm.updatePath=http://localhost:8080/cmso/v1/tm/updateChangeRecord
+tm.approvalStatus=Approved|Scheduled,Approved|Assigned
+tm.template.folder=data/templates/tm
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/startDbinitService.sh b/cmso-sonar/docker/integration/cmso-service/etc/startDbinitService.sh
new file mode 100755
index 0000000..a7cd3ff
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/startDbinitService.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+apt update
+apt install netcat --assume-yes
+COUNTER=30
+while [  $COUNTER -gt 0  ]; do
+    nc -z ${DB_HOST} 3306
+    if [ $? -eq 0 ]; then
+        let COUNTER=0
+    else
+    	let COUNTER=COUNTER-1 
+	sleep 10
+    fi
+done
+
+echo "VM_ARGS="${VM_ARGS}
+
+java -Djava.security.egd=file:/dev/./urandom  ${VM_ARGS} -Xms256m -Xmx1024m  -jar  ./app.jar  --spring.config.location=/share/etc/config/liquibase.properties
diff --git a/cmso-sonar/docker/integration/cmso-service/etc/startJacocoService.sh b/cmso-sonar/docker/integration/cmso-service/etc/startJacocoService.sh
new file mode 100644
index 0000000..5d65a7f
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-service/etc/startJacocoService.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+apt update
+apt install wget
+apt install unzip  --assume-yes
+wget http://repo1.maven.org/maven2/org/jacoco/org.jacoco.agent/0.8.2/org.jacoco.agent-0.8.2.jar
+unzip org.jacoco.agent-0.8.2.jar
+cp org.jacoco.agent-0.8.2/jacocoagent.jar .
+ls -l
+
+VM_ARGS="${VM_ARGS} -javaagent:./jacocoagent.jar=destfile=/share/logs/service.jacoco.exec,dumponexit=true,jmx=true,append=true,output=file,includes=org.onap.*"
+
+echo "VM_ARGS=${VM_ARGS}"
+
+java -Djava.security.egd=file:/dev/./urandom -Xms256m -Xmx1024m ${VM_ARGS} -jar ./app.jar
diff --git a/cmso-sonar/docker/integration/cmso-ticketmgt/etc/config/cadi.properties b/cmso-sonar/docker/integration/cmso-ticketmgt/etc/config/cadi.properties
new file mode 100644
index 0000000..9a6b91c
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-ticketmgt/etc/config/cadi.properties
@@ -0,0 +1,21 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a 
+# copy of the License at
+# 
+#        http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express 
+# or implied. See the License for the specific language governing 
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+# 
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
diff --git a/cmso-sonar/docker/integration/cmso-ticketmgt/etc/config/ticketmgt.properties b/cmso-sonar/docker/integration/cmso-ticketmgt/etc/config/ticketmgt.properties
new file mode 100644
index 0000000..5ca252f
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-ticketmgt/etc/config/ticketmgt.properties
@@ -0,0 +1,30 @@
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2019 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# 
+# 
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the ā??Licenseā?);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         https://creativecommons.org/licenses/by/4.0/
+# 
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
diff --git a/cmso-sonar/docker/integration/cmso-ticketmgt/etc/startJacocoService.sh b/cmso-sonar/docker/integration/cmso-ticketmgt/etc/startJacocoService.sh
new file mode 100644
index 0000000..0db6f1f
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-ticketmgt/etc/startJacocoService.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+apt update
+apt install wget
+apt install unzip  --assume-yes
+wget http://repo1.maven.org/maven2/org/jacoco/org.jacoco.agent/0.8.2/org.jacoco.agent-0.8.2.jar
+unzip org.jacoco.agent-0.8.2.jar
+cp org.jacoco.agent-0.8.2/jacocoagent.jar .
+ls -l
+
+VM_ARGS="${VM_ARGS} -javaagent:./jacocoagent.jar=destfile=/share/logs/jacoco.exec,dumponexit=true,jmx=true,append=true,output=file,includes=org.onap.optf.cmso.*"
+
+echo "VM_ARGS=${VM_ARGS}"
+
+java -Djava.security.egd=file:/dev/./urandom -Xms256m -Xmx1024m ${VM_ARGS} -jar ./app.jar
diff --git a/cmso-sonar/docker/integration/cmso-topology/etc/config/cadi.properties b/cmso-sonar/docker/integration/cmso-topology/etc/config/cadi.properties
new file mode 100644
index 0000000..5135d1d
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-topology/etc/config/cadi.properties
@@ -0,0 +1,4 @@
+
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
diff --git a/cmso-sonar/docker/integration/cmso-topology/etc/config/topology.properties b/cmso-sonar/docker/integration/cmso-topology/etc/config/topology.properties
new file mode 100644
index 0000000..5ca252f
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-topology/etc/config/topology.properties
@@ -0,0 +1,30 @@
+#-------------------------------------------------------------------------------
+# Copyright © 2017-2019 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# 
+# 
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the ā??Licenseā?);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         https://creativecommons.org/licenses/by/4.0/
+# 
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
diff --git a/cmso-sonar/docker/integration/cmso-topology/etc/startJacocoService.sh b/cmso-sonar/docker/integration/cmso-topology/etc/startJacocoService.sh
new file mode 100644
index 0000000..0db6f1f
--- /dev/null
+++ b/cmso-sonar/docker/integration/cmso-topology/etc/startJacocoService.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+apt update
+apt install wget
+apt install unzip  --assume-yes
+wget http://repo1.maven.org/maven2/org/jacoco/org.jacoco.agent/0.8.2/org.jacoco.agent-0.8.2.jar
+unzip org.jacoco.agent-0.8.2.jar
+cp org.jacoco.agent-0.8.2/jacocoagent.jar .
+ls -l
+
+VM_ARGS="${VM_ARGS} -javaagent:./jacocoagent.jar=destfile=/share/logs/jacoco.exec,dumponexit=true,jmx=true,append=true,output=file,includes=org.onap.optf.cmso.*"
+
+echo "VM_ARGS=${VM_ARGS}"
+
+java -Djava.security.egd=file:/dev/./urandom -Xms256m -Xmx1024m ${VM_ARGS} -jar ./app.jar
diff --git a/cmso-sonar/docker/integration/docker-compose.yml b/cmso-sonar/docker/integration/docker-compose.yml
new file mode 100644
index 0000000..5c2f173
--- /dev/null
+++ b/cmso-sonar/docker/integration/docker-compose.yml
@@ -0,0 +1,104 @@
+version: '3'
+
+services:
+  mariadb:
+    image: mariadb:10.1.11
+    volumes:
+      - "/var/lib/mysql"
+      - "../mariadb/conf1:/etc/mysql/conf.d:ro"
+    environment:
+      - MYSQL_ROOT_PASSWORD=beer
+    ports:
+      - "8806:3306"
+
+  db-init-svc:
+    image: onap/optf-cmso-dbinit
+    volumes:
+      - "./cmso-service/etc:/share/etc:rw"
+      - "./cmso-service/logs:/share/logs:rw"
+    depends_on:
+      - mariadb
+    environment: 
+      - DB_HOST=mariadb
+    entrypoint: "bash -x /share/etc/startDbinitService.sh"
+
+  db-init-opt:
+    image: onap/optf-cmso-dbinit
+    volumes:
+      - "./cmso-optimizer/etc:/share/etc:rw"
+      - "./cmso-optimizer/logs:/share/logs:rw"
+    depends_on:
+      - mariadb
+    environment: 
+      - DB_HOST=mariadb
+    entrypoint: "bash -x /share/etc/startDbinitService.sh"
+
+
+  cmso-service:
+    image: onap/optf-cmso-service
+    volumes:
+      - "./cmso-service/etc:/share/etc:rw"
+      - "./cmso-service/logs:/share/logs:rw"
+      - "./cmso-service/debug-logs:/share/debug-logs:rw"
+    depends_on:
+      - db-init-svc
+    entrypoint: "bash -x /share/etc/startJacocoService.sh"
+    ports:
+      - "8080:8080"
+    environment: 
+      - DB_HOST=mariadb
+      - OPTIMIZER_URL=http://cmso-optimizer:7997/optimizer/v1/optimize/schedule
+      - OPTIMIZER_HEALTH_URL=http://cmso-optimizer:7997/optimizer/v1/health?checkInterfaces=true
+
+  cmso-ticketmgt:
+    image: onap/optf-cmso-ticketmgt
+    volumes:
+      - "./cmso-ticketmgt/etc:/share/etc:rw"
+      - "./cmso-ticketmgt/logs:/share/logs:rw"
+      - "./cmso-ticketmgt/debug-logs:/share/debug-logs:rw"
+    entrypoint: "bash -x /share/etc/startJacocoService.sh"
+    ports:
+      - "7999:7999"
+
+  cmso-topology:
+    image: onap/optf-cmso-topology
+    volumes:
+      - "./cmso-topology/etc:/share/etc:rw"
+      - "./cmso-topology/logs:/share/logs:rw"
+      - "./cmso-topology/debug-logs:/share/debug-logs:rw"
+    entrypoint: "bash -x /share/etc/startJacocoService.sh"
+    ports:
+      - "7998:7998"
+
+  cmso-optimizer:
+    image: onap/optf-cmso-optimizer
+    volumes:
+      - "./cmso-optimizer/etc:/share/etc:rw"
+      - "./cmso-optimizer/logs:/share/logs:rw"
+      - "./cmso-optimizer/debug-logs:/share/debug-logs:rw"
+    depends_on:
+      - db-init-opt
+    entrypoint: "bash -x /share/etc/startJacocoService.sh"
+    ports:
+      - "7997:7997"
+    environment: 
+      - DB_HOST=mariadb
+      - TOPOLOGY_HOST=cmso-topology
+      - TICKETMGT_HOST=cmso-ticketmgt
+
+
+  cmso-robot:
+    image: onap/optf-cmso-robot
+    volumes:
+      - "./cmso-robot/logs:/share:rw"
+    depends_on:
+      - cmso-service
+    environment:
+      - GLOBAL_SCHEDULER_URL=http://cmso-service:8080
+      - GLOBAL_OPTIMIZER_URL=http://cmso-optimizer:7997
+      - CMSO_STARTUP_WAIT_TIME=600s
+      - TAGS=-i ete
+      - OUTPUT=-d /share
+    working_dir: /opt/cmso-robot  
+    entrypoint: "bash -x /opt/cmso-robot/ete.sh"
+
diff --git a/cmso-sonar/docker/integration/ete_test.sh b/cmso-sonar/docker/integration/ete_test.sh
new file mode 100755
index 0000000..0d86fef
--- /dev/null
+++ b/cmso-sonar/docker/integration/ete_test.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+docker-compose up >up.txt 2>&1 &
+
+### Wait for robot to finish
+sleep 240
+docker exec cmso-service_cmso-robot_1 ls
+while [ $? -ne 1 ]; do
+  sleep 60
+  docker exec cmso-service_cmso-robot_1 ls
+done
+
+### Shut down java with to give time to write the jacoco_exec file
+docker exec cmso-service_cmso-service_1 pkill java
+docker exec cmso-service_cmso-optimizer_1 pkill java
+sleep 10
+
+### wait for  cmso  containers to exit and jacoco files written
+docker exec cmso-service_cmso-service_1 ls
+while [ $? -ne 1 ]; do
+  sleep 60
+  docker exec cmso-service_cmso-service_1 ls
+done
+
+docker exec cmso-service_cmso-optimizer_1 ls
+while [ $? -ne 1 ]; do
+  sleep 60
+  docker exec cmso-service_cmso-optimizer_1 ls
+done
+
+cat up.txt
+
+docker ps -a
+docker-compose down
+docker ps -a
diff --git a/cmso-sonar/docker/integration/mariadb/conf1/my.cnf b/cmso-sonar/docker/integration/mariadb/conf1/my.cnf
new file mode 100644
index 0000000..c6631fb
--- /dev/null
+++ b/cmso-sonar/docker/integration/mariadb/conf1/my.cnf
@@ -0,0 +1,194 @@
+# Example MySQL config file for medium systems.
+#
+# This is for a system with memory 8G where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+##[client]
+##user            = root
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+##performance_schema
+
+slow_query_log =ON
+long_query_time =2
+slow_query_log_file =//var/lib/mysql/slow_query.log
+##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
+##datadir         = //opt/app/mysql/data
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+skip-external-locking
+explicit_defaults_for_timestamp = true
+skip-symbolic-links
+local-infile = 0
+#ignore_db_dir=lost+found
+key_buffer_size = 16M
+max_allowed_packet = 4M
+table_open_cache = 100
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+max_connections = 500
+lower_case_table_names = 1
+thread_stack = 256K
+thread_cache_size = 25
+query_cache_size = 8M
+query_cache_type = 0
+query_prealloc_size = 512K
+query_cache_limit = 1M
+
+# Password validation
+##plugin-load-add=simple_password_check.so
+##simple_password_check_other_characters=0
+
+# Audit Log settings
+plugin-load-add=server_audit.so
+server_audit=FORCE_PLUS_PERMANENT
+server_audit_file_path=//var/lib/mysql/audit.log
+server_audit_file_rotate_size=50M
+server_audit_events=CONNECT,QUERY,TABLE
+server_audit_logging=on
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+#
+#skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+##log-bin=//var/lib/mysql/mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=row
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+##innodb_data_home_dir = //opt/app/mysql/data
+##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
+##innodb_log_group_home_dir = //opt/app/mysql/iblogs
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+innodb_buffer_pool_size = 128M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 10M
+innodb_log_files_in_group = 3
+innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_autoextend_increment = 100
+expire_logs_days = 8
+open_files_limit = 2000
+transaction-isolation=READ-COMMITTED
+####### Galera parameters #######
+## Galera Provider configuration
+wsrep_provider=/usr/lib/galera/libgalera_smm.so
+wsrep_provider_options="gcache.size=128M; gcache.page_size=10M"
+## Galera Cluster configuration
+wsrep_cluster_name="MSO-automated-tests-cluster"
+wsrep_cluster_address="gcomm://"
+#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
+##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
+## Galera Synchronization configuration
+wsrep_sst_method=rsync
+#wsrep_sst_method=xtrabackup-v2
+#wsrep_sst_auth="sstuser:Mon#2o!6"
+## Galera Node configuration
+wsrep_node_name="mariadb1"
+##wsrep_node_address="192.169.3.184"
+wsrep_on=OFF
+## Status notification
+#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
+#######
+
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20971520
+
+##[mysqlhotcopy]
+##interactive-timeout
+##[mysqld_safe]
+##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
+##log-error=//opt/app/mysql/log/mysqld.log
\ No newline at end of file
diff --git a/cmso-sonar/docker/integration/mariadb/conf2/my.cnf b/cmso-sonar/docker/integration/mariadb/conf2/my.cnf
new file mode 100644
index 0000000..bf5f9c1
--- /dev/null
+++ b/cmso-sonar/docker/integration/mariadb/conf2/my.cnf
@@ -0,0 +1,193 @@
+# Example MySQL config file for medium systems.
+#
+# This is for a system with memory 8G where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+##[client]
+##user            = root
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+##performance_schema
+
+slow_query_log =ON
+long_query_time =2
+slow_query_log_file =//var/lib/mysql/slow_query.log
+##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
+##datadir         = //opt/app/mysql/data
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+skip-external-locking
+explicit_defaults_for_timestamp = true
+skip-symbolic-links
+local-infile = 0
+#ignore_db_dir=lost+found
+key_buffer_size = 16M
+max_allowed_packet = 4M
+table_open_cache = 100
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+max_connections = 500
+lower_case_table_names = 1
+thread_stack = 256K
+thread_cache_size = 25
+query_cache_size = 8M
+query_cache_type = 0
+query_prealloc_size = 512K
+query_cache_limit = 1M
+
+# Password validation
+##plugin-load-add=simple_password_check.so
+##simple_password_check_other_characters=0
+
+# Audit Log settings
+plugin-load-add=server_audit.so
+server_audit=FORCE_PLUS_PERMANENT
+server_audit_file_path=//var/lib/mysql/audit.log
+server_audit_file_rotate_size=50M
+server_audit_events=CONNECT,QUERY,TABLE
+server_audit_logging=on
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+#
+#skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+##log-bin=//var/lib/mysql/mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=row
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+##innodb_data_home_dir = //opt/app/mysql/data
+##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
+##innodb_log_group_home_dir = //opt/app/mysql/iblogs
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+innodb_buffer_pool_size = 6380M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 150M
+innodb_log_files_in_group = 3
+innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_autoextend_increment = 100
+expire_logs_days = 8
+open_files_limit = 2000
+transaction-isolation=READ-COMMITTED
+####### Galera parameters #######
+## Galera Provider configuration
+wsrep_provider=/usr/lib/galera/libgalera_smm.so
+wsrep_provider_options="gcache.size=2G; gcache.page_size=1G"
+## Galera Cluster configuration
+wsrep_cluster_name="MSO-automated-tests-cluster"
+wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
+##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
+## Galera Synchronization configuration
+wsrep_sst_method=rsync
+#wsrep_sst_method=xtrabackup-v2
+#wsrep_sst_auth="sstuser:Mon#2o!6"
+## Galera Node configuration
+wsrep_node_name="mariadb2"
+##wsrep_node_address="192.169.3.184"
+wsrep_on=ON
+## Status notification
+#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
+#######
+
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20971520
+
+##[mysqlhotcopy]
+##interactive-timeout
+##[mysqld_safe]
+##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
+##log-error=//opt/app/mysql/log/mysqld.log
\ No newline at end of file
diff --git a/cmso-sonar/docker/integration/mariadb/conf3/my.cnf b/cmso-sonar/docker/integration/mariadb/conf3/my.cnf
new file mode 100644
index 0000000..74f7a31
--- /dev/null
+++ b/cmso-sonar/docker/integration/mariadb/conf3/my.cnf
@@ -0,0 +1,193 @@
+# Example MySQL config file for medium systems.
+#
+# This is for a system with memory 8G where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+##[client]
+##user            = root
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+##performance_schema
+
+slow_query_log =ON
+long_query_time =2
+slow_query_log_file =//var/lib/mysql/slow_query.log
+##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
+##datadir         = //opt/app/mysql/data
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+skip-external-locking
+explicit_defaults_for_timestamp = true
+skip-symbolic-links
+local-infile = 0
+#ignore_db_dir=lost+found
+key_buffer_size = 16M
+max_allowed_packet = 4M
+table_open_cache = 100
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+max_connections = 500
+lower_case_table_names = 1
+thread_stack = 256K
+thread_cache_size = 25
+query_cache_size = 8M
+query_cache_type = 0
+query_prealloc_size = 512K
+query_cache_limit = 1M
+
+# Password validation
+##plugin-load-add=simple_password_check.so
+##simple_password_check_other_characters=0
+
+# Audit Log settings
+plugin-load-add=server_audit.so
+server_audit=FORCE_PLUS_PERMANENT
+server_audit_file_path=//var/lib/mysql/audit.log
+server_audit_file_rotate_size=50M
+server_audit_events=CONNECT,QUERY,TABLE
+server_audit_logging=on
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+#
+#skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+##log-bin=//var/lib/mysql/mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=row
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+##innodb_data_home_dir = //opt/app/mysql/data
+##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
+##innodb_log_group_home_dir = //opt/app/mysql/iblogs
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+innodb_buffer_pool_size = 6380M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 150M
+innodb_log_files_in_group = 3
+innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_autoextend_increment = 100
+expire_logs_days = 8
+open_files_limit = 2000
+transaction-isolation=READ-COMMITTED
+####### Galera parameters #######
+## Galera Provider configuration
+wsrep_provider=/usr/lib/galera/libgalera_smm.so
+wsrep_provider_options="gcache.size=2G; gcache.page_size=1G"
+## Galera Cluster configuration
+wsrep_cluster_name="MSO-automated-tests-cluster"
+wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
+##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
+## Galera Synchronization configuration
+wsrep_sst_method=rsync
+#wsrep_sst_method=xtrabackup-v2
+#wsrep_sst_auth="sstuser:Mon#2o!6"
+## Galera Node configuration
+wsrep_node_name="mariadb3"
+##wsrep_node_address="192.169.3.184"
+wsrep_on=ON
+## Status notification
+#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
+#######
+
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20971520
+
+##[mysqlhotcopy]
+##interactive-timeout
+##[mysqld_safe]
+##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
+##log-error=//opt/app/mysql/log/mysqld.log
\ No newline at end of file