path: root/kubernetes/onap/values.yaml

# Copyright © 2019 Amdocs, Bell Canada
# Copyright (c) 2020 Nordix Foundation, Modifications
# Modifications Copyright © 2020-2021 Nokia
# Modifications Copyright © 2023 Nordix Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#################################################################
# Global configuration overrides.
#
# These overrides will affect all helm charts (ie. applications)
# that are listed below and are 'enabled'.
#################################################################
global:
  # Change to an unused port prefix range to prevent port conflicts
  # with other instances running within the same k8s cluster
  nodePortPrefix: 302
  nodePortPrefixExt: 304

  # ONAP Repository
  # Four different repositories are used
  # You can change individually these repositories to ones that will serve the
  # right images. If credentials are needed for one of them, see below.
  repository: nexus3.onap.org:10001
  dockerHubRepository: &dockerHubRepository docker.io
  elasticRepository: &elasticRepository docker.elastic.co
  quayRepository: quay.io
  googleK8sRepository: k8s.gcr.io
  githubContainerRegistry: ghcr.io

  # Default credentials
  # they're optional. If the target repository doesn't need them, comment them
  repositoryCred:
    user: docker
    password: docker
  # If you want / need authentication on the repositories, please set
  # Don't set them if the target repo is the same than others
  # so id you've set repository to value `my.private.repo` and same for
  # dockerHubRepository, you'll have to configure only repository (exclusive) OR
  # dockerHubCred.
  # dockerHubCred:
  #   user: myuser
  #   password: mypassord
  # elasticCred:
  #   user: myuser
  #   password: mypassord
  # googleK8sCred:
  #   user: myuser
  #   password: mypassord

  # Default definition of the secret containing the docker image repository
  # credentials. In the default ONAP deployment the secret is created by the
  # repository-wrapper component, which uses the secrets defined above.
  # If this is not wanted or other secrets are created, alternative secret
  # names can be used
  # Overrides for specific images can be done, if the "image" entry is used as
  # a map and the "pullSecrets" is used, e.g.
  # image:
  #   ...
  #   pullSecrets:
  #     - myRegistryKeySecretName
  #
  imagePullSecrets:
    - '{{ include "common.namespace" . }}-docker-registry-key'

  # common global images
  # Busybox for simple shell manipulation
  busyboxImage: busybox:1.34.1

  # curl image
  curlImage: curlimages/curl:7.80.0

  # env substitution image
  envsubstImage: dibi/envsubst:1

  # generate htpasswd files image
  # there's only latest image for htpasswd
  htpasswdImage: xmartlabs/htpasswd:latest

  # kubenretes client image
  kubectlImage: bitnami/kubectl:1.22.4

  # logging agent
  loggingImage: beats/filebeat:5.5.0

  # mariadb client image
  mariadbImage: bitnami/mariadb:10.5.8

  # nginx server image
  nginxImage: bitnami/nginx:1.21.4

  # postgreSQL client and server image
  postgresImage: crunchydata/crunchy-postgres:centos8-13.2-4.6.1

  # readiness check image
  readinessImage: onap/oom/readiness:6.0.2

  # image pull policy
  pullPolicy: Always

  # default java image
  jreImage: onap/integration-java11:10.0.0

  # default clusterName
  # {{ template "common.fullname" . }}.{{ template "common.namespace" . }}.svc.{{ .Values.global.clusterName }}
  clusterName: cluster.local

  # default mount path root directory referenced
  # by persistent volumes and log files
  persistence:
    mountPath: /dockerdata-nfs
    enableDefaultStorageclass: false
    parameters: {}
    storageclassProvisioner: kubernetes.io/no-provisioner
    volumeReclaimPolicy: Retain

  # Global flag to enable the creation of default roles instead of using
  # common roles-wrapper
  createDefaultRoles: false

  # override default resource limit flavor for all charts
  flavor: unlimited

  # flag to enable debugging - application support required
  debugEnabled: false

  # default password complexity
  # available options: phrase, name, pin, basic, short, medium, long, maximum security
  # More datails: https://www.masterpasswordapp.com/masterpassword-algorithm.pdf
  passwordStrength: long

  # configuration to set log level to all components (the one that are using
  # "common.log.level" to set this)
  # can be overrided per components by setting logConfiguration.logLevelOverride
  # to the desired value
  # logLevel: DEBUG

  # Global ingress configuration
  ingress:
    # generally enable ingress for ONAP components
    enabled: false
    # enable all component's Ingress interfaces
    enable_all: false

    # Provider: ingress, istio, gw-api
    provider: istio
    # Ingress class (only for provider "ingress"): e.g. nginx, traefik
    ingressClass:
    # Ingress Selector (only for provider "istio") to match with the
    # ingress pod label "istio=ingress"
    ingressSelector: ingress
    # optional: common used Gateway (for Istio, GW-API) and listener names
    commonGateway:
      name: ""
      httpListener: ""
      httpsListener: ""

    # default Ingress base URL and preAddr- and postAddr settings
    # Ingress URLs result:
    # <preaddr><component.ingress.service.baseaddr><postaddr>.<baseurl>
    virtualhost:
      # Default Ingress base URL
      # can be overwritten in component by setting ingress.baseurlOverride
      baseurl: "simpledemo.onap.org"
      # prefix for baseaddr
      # can be overwritten in component by setting ingress.preaddrOverride
      preaddr: ""
      # postfix for baseaddr
      # can be overwritten in component by setting ingress.postaddrOverride
      postaddr: ""

    # All http (port 80) requests via ingress will be redirected
    # to port 443 on Ingress controller
    # only valid for Istio Gateway (ServiceMesh enabled)
    config:
      ssl: "redirect"
    # you can set an own Secret containing a certificate
    # only valid for Istio Gateway (ServiceMesh enabled)
    #  tls:
    #    secret: 'my-ingress-cert'

    # optional: Namespace of the Istio IngressGateway or Gateway-API
    # only valid for Istio Gateway (ServiceMesh enabled)
    namespace: istio-ingress

  # Global Service Mesh configuration
  serviceMesh:
    enabled: false
    tls: true
    # be aware that linkerd is not well tested
    engine: "istio" # valid value: istio or linkerd

  # Global Istio Authorization Policy configuration
  authorizationPolicies:
    enabled: false

  # metrics part
  # If enabled, exporters (for prometheus) will be deployed
  # if custom resources set to yes, CRD from prometheus operartor will be
  # created
  # Not all components have it enabled.
  #
  metrics:
    enabled: true
    custom_resources: false

  # Disabling AAF
  # POC Mode, only for use in development environment
  # Keep it enabled in production
  aafEnabled: false

  # Disabling MSB
  # POC Mode, only for use in development environment
  msbEnabled: true

  # default values for certificates
  certificate:
    default:
      renewBefore: 720h #30 days
      duration:    8760h #365 days
      subject:
        organization: "Linux-Foundation"
        country: "US"
        locality: "San-Francisco"
        province: "California"
        organizationalUnit: "ONAP"
      issuer:
        group: certmanager.onap.org
        kind: CMPv2Issuer
        name: cmpv2-issuer-onap

  # Enabling CMPv2
  cmpv2Enabled: false
  platform:
    certificates:
      clientSecretName: oom-cert-service-client-tls-secret
      keystoreKeyRef: keystore.jks
      truststoreKeyRef: truststore.jks
      keystorePasswordSecretName: oom-cert-service-certificates-password
      keystorePasswordSecretKey: password
      truststorePasswordSecretName: oom-cert-service-certificates-password
      truststorePasswordSecretKey: password

  # Indicates offline deployment build
  # Set to true if you are rendering helm charts for offline deployment
  # Otherwise keep it disabled
  offlineDeploymentBuild: false

  # TLS
  # Set to false if you want to disable TLS for NodePorts. Be aware that this
  # will loosen your security.
  # if set this element will force or not tls even if serviceMesh.tls is set.
  tlsEnabled: false

  # Logging
  # Currently, centralized logging is not in best shape so it's disabled by
  # default
  centralizedLoggingEnabled: &centralizedLogging false

  # Example of specific for the components where you want to disable TLS only for
  # it:
  # if set this element will force or not tls even if global.serviceMesh.tls and
  # global.tlsEnabled is set otherwise.
  # robot:
  #   tlsOverride: false

  # Global storage configuration
  #    Set to "-" for default, or with the name of the storage class
  #    Please note that if you use AAF, CDS, SDC, Netbox or Robot, you need a
  #    storageclass with RWX capabilities (or set specific configuration for these
  #    components).
  # persistence:
  #   storageClass: "-"

# Example of specific for the components which requires RWX:
# cds:
#   cds-blueprints-processor:
#     persistence:
#       storageClassOverride: "My_RWX_Storage_Class"
# sdc:
#   sdc-onboarding-be:
#     persistence:
#       storageClassOverride: "My_RWX_Storage_Class"

#################################################################
# Enable/disable and configure helm charts (ie. applications)
# to customize the ONAP deployment.
#################################################################

aai:
  enabled: false
cassandra:
  enabled: false
cds:
  enabled: false
cli:
  enabled: false
cps:
  enabled: false
dcaegen2-services:
  enabled: false
holmes:
  enabled: false
dmaap:
  enabled: false
  message-router:
    enabled: false
  dmaap-dr-prov:
    enabled: false
  dmaap-dr-node:
    enabled: false
oof:
  enabled: false
mariadb-galera:
  enabled: false
msb:
  enabled: false
multicloud:
  enabled: false
nbi:
  enabled: false
  config:
    # openstack configuration
    openStackRegion: "Yolo"
    openStackVNFTenantId: "1234"
policy:
  enabled: false
portal-ng:
  enabled: false
robot:
  enabled: false
  config:
    # openStackEncryptedPasswordHere should match the encrypted string used in SO and overridden per environment
    openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
sdc:
  enabled: false
sdnc:
  enabled: false

  replicaCount: 1

  mysql:
    replicaCount: 1
so:
  enabled: false

  replicaCount: 1

  liveness:
    # necessary to disable liveness probe when setting breakpoints
    # in debugger so K8s doesn't restart unresponsive container
    enabled: false

  # so server configuration
  config:
    # message router configuration
    dmaapTopic: "AUTO"
    # openstack configuration
    openStackUserName: "vnf_user"
    openStackRegion: "RegionOne"
    openStackKeyStoneUrl: "http://1.2.3.4:5000"
    openStackServiceTenantName: "service"
    openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"

  # in order to enable static password for so-monitoring uncomment:
  # so-monitoring:
  #   server:
  #     monitoring:
  #       password: demo123456!

strimzi:
  enabled: false
  # Kafka replication & disk storage should be dimensioned
  # according to each given system use case.
  replicaCount: 3
  persistence:
    kafka:
      size: 10Gi
    zookeeper:
      size: 1Gi
  # Strimzi kafka bridge is an optional http api towards
  # kafka provided by https://strimzi.io/docs/bridge/latest/
  strimzi-kafka-bridge:
    enabled: false

uui:
  enabled: false
vfc:
  enabled: false
vnfsdk:
  enabled: false
modeling:
  enabled: false
platform:
  enabled: false
a1policymanagement:
  enabled: false
repository-wrapper:
  enabled: true
roles-wrapper:
  enabled: true