diff options
Diffstat (limited to 'kubernetes')
71 files changed, 1182 insertions, 707 deletions
diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml index 1cd5cb4a26..a149f0656f 100644 --- a/kubernetes/aaf/charts/aaf-cm/values.yaml +++ b/kubernetes/aaf/charts/aaf-cm/values.yaml @@ -19,13 +19,14 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_cm:2.1.2-SNAPSHOT +image: onap/aaf/aaf_cm:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +66,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 800Mi + requests: + cpu: 20m + memory: 500Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 40m + memory: 600Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml index 83eaf15e38..73dac29fab 100644 --- a/kubernetes/aaf/charts/aaf-cs/values.yaml +++ b/kubernetes/aaf/charts/aaf-cs/values.yaml @@ -17,7 +17,7 @@ ################################################################# global: nodePortPrefix: 302 - +flavor: small ################################################################# # Application configuration defaults. @@ -71,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 10000Mi + requests: + cpu: 10m + memory: 8500Mi + large: + limits: + cpu: 400m + memory: 12000Mi + requests: + cpu: 40m + memory: 9000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml index f484883f71..0e3a81a9c6 100644 --- a/kubernetes/aaf/charts/aaf-fs/values.yaml +++ b/kubernetes/aaf/charts/aaf-fs/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_fs:2.1.2-SNAPSHOT +image: onap/aaf/aaf_fs:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +65,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 600Mi + requests: + cpu: 10m + memory: 300Mi + large: + limits: + cpu: 500m + memory: 700Mi + requests: + cpu: 100m + memory: 400Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-gui/values.yaml b/kubernetes/aaf/charts/aaf-gui/values.yaml index 92faa6c564..5665d1df4f 100644 --- a/kubernetes/aaf/charts/aaf-gui/values.yaml +++ b/kubernetes/aaf/charts/aaf-gui/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_gui:2.1.2-SNAPSHOT +image: onap/aaf/aaf_gui:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -66,21 +66,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 100m + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + large: + limits: + cpu: 200m + memory: 1Gi + requests: + cpu: 100m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml index 27f59d1802..6fcf861420 100644 --- a/kubernetes/aaf/charts/aaf-hello/values.yaml +++ b/kubernetes/aaf/charts/aaf-hello/values.yaml @@ -25,7 +25,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_hello:2.1.2-SNAPSHOT +image: onap/aaf/aaf_hello:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +65,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 20m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml index 86d67fc431..c9240025f1 100644 --- a/kubernetes/aaf/charts/aaf-locate/values.yaml +++ b/kubernetes/aaf/charts/aaf-locate/values.yaml @@ -23,13 +23,13 @@ global: # If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines. # persistence: # mountPath: /dockerdata - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_locate:2.1.2-SNAPSHOT +image: onap/aaf/aaf_locate:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -69,21 +69,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 600Mi + requests: + cpu: 20m + memory: 300Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 40m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml index c349814f16..943ad16109 100644 --- a/kubernetes/aaf/charts/aaf-oauth/values.yaml +++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_oauth:2.1.2-SNAPSHOT +image: onap/aaf/aaf_oauth:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +65,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 400Mi + requests: + cpu: 20m + memory: 200Mi + large: + limits: + cpu: 400m + memory: 600Mi + requests: + cpu: 40m + memory: 200Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-service/values.yaml b/kubernetes/aaf/charts/aaf-service/values.yaml index 3e0ed61711..5ad31ffdda 100644 --- a/kubernetes/aaf/charts/aaf-service/values.yaml +++ b/kubernetes/aaf/charts/aaf-service/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_service:2.1.2-SNAPSHOT +image: onap/aaf/aaf_service:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -66,21 +66,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 600Mi + requests: + cpu: 20m + memory: 300Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 40m + memory: 300Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml index 5eb7b330ba..0a83e85012 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml @@ -47,7 +47,7 @@ spec: - mountPath: /quorumclient/auth name: {{ include "common.fullname" . }}-auth resources: -{{ include "common.resources" . | indent 12 }} +{{ include "common.resources" . | indent 10 }} {{- if .Values.nodeSelector }} nodeSelector: {{ toYaml .Values.nodeSelector | indent 10 }} diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml index c5fd489f31..d6ac1cb881 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml @@ -28,7 +28,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/smsquorumclient:2.0.0 +image: onap/aaf/smsquorumclient:latest pullPolicy: Always # flag to enable debugging - application support required @@ -54,21 +54,22 @@ persistence: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +flavor: small + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 10Mi + large: + limits: + cpu: 400m + memory: 700Mi + requests: + cpu: 10m + memory: 100Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml index ddfc7c61d0..ab0ad17b85 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml @@ -45,7 +45,8 @@ spec: - mountPath: /etc/localtime name: localtime readOnly: true - + resources: +{{ include "common.resources" . | indent 10 }} - image: "{{ include "common.repository" . }}/{{ .Values.image.consul }}" name: {{ include "common.name" . }}-backend imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} @@ -62,6 +63,8 @@ spec: - mountPath: /etc/localtime name: localtime readOnly: true + resources: +{{ include "common.resources" . | indent 10 }} volumes: - name: {{ include "common.fullname" . }}-consuldata persistentVolumeClaim: diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml index 317abcda08..58017bdf40 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml @@ -90,21 +90,22 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +flavor: small + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 10Mi + large: + limits: + cpu: 400m + memory: 700Mi + requests: + cpu: 10m + memory: 100Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml index 189cc0d57d..ed24f67d44 100644 --- a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml +++ b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml @@ -81,7 +81,7 @@ spec: - mountPath: /sms/auth name: {{ include "common.fullname" . }}-auth resources: -{{ include "common.resources" . | indent 12 }} +{{ include "common.resources" . | indent 10 }} {{- if .Values.nodeSelector }} nodeSelector: {{ toYaml .Values.nodeSelector | indent 10 }} diff --git a/kubernetes/aaf/charts/aaf-sms/values.yaml b/kubernetes/aaf/charts/aaf-sms/values.yaml index b75038c973..7a25581908 100644 --- a/kubernetes/aaf/charts/aaf-sms/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/values.yaml @@ -22,13 +22,13 @@ global: loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 persistence: {} - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/sms:2.0.0 +image: onap/aaf/sms:latest pullPolicy: Always # flag to enable debugging - application support required @@ -84,21 +84,20 @@ persistence: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 10Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 10m + memory: 100Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/aaf/values.yaml b/kubernetes/aaf/values.yaml index c8f048438b..931a31dc65 100644 --- a/kubernetes/aaf/values.yaml +++ b/kubernetes/aaf/values.yaml @@ -23,7 +23,6 @@ global: ubuntuInitImage: oomk8s/ubuntu-init:2.0.0 persistence: enabled: true - ################################################################# # Application configuration defaults. ################################################################# @@ -38,8 +37,9 @@ config: csServiceName: aaf-cass # gerrit branch where the latest aaf/auth/sample/public code exists gerritProject: http://gerrit.onap.org/r/aaf/authz.git - gerritBranch: master + gerritBranch: 2.0.0-ONAP +flavor: small # default number of instances replicaCount: 1 @@ -83,21 +83,20 @@ persistence: mountPath: /dockerdata-nfs mountSubPath: aaf/data -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 2 + memory: 3Gi + requests: + cpu: 2 + memory: 3Gi + large: + limits: + cpu: 4 + memory: 6Gi + requests: + cpu: 4 + memory: 6Gi + unlimited: {} diff --git a/kubernetes/aai/charts/aai-data-router/resources/config/auth/tomcat_keystore b/kubernetes/aai/charts/aai-data-router/resources/config/auth/tomcat_keystore Binary files differindex 9eec841aa2..de5325b4aa 100644 --- a/kubernetes/aai/charts/aai-data-router/resources/config/auth/tomcat_keystore +++ b/kubernetes/aai/charts/aai-data-router/resources/config/auth/tomcat_keystore diff --git a/kubernetes/aai/charts/aai-data-router/resources/config/log/logback.xml b/kubernetes/aai/charts/aai-data-router/resources/config/log/logback.xml new file mode 100644 index 0000000000..d7ff0143a1 --- /dev/null +++ b/kubernetes/aai/charts/aai-data-router/resources/config/log/logback.xml @@ -0,0 +1,193 @@ +<!-- + ============LICENSE_START======================================================= + org.onap.aai + ================================================================================ + Copyright © 2018 AT&T Intellectual Property. All rights reserved. + Copyright © 2018 Amdocs + ================================================================================ + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + ============LICENSE_END========================================================= +--> +<configuration scan="true" scanPeriod="3 seconds" debug="false"> + <!--<jmxConfigurator /> --> + <!-- directory path for all other type logs --> + + <property name="logDir" value="/var/log/onap" /> + + <!-- specify the component name --> + <property name="componentName" value="AAI-DR" /> + + <!-- default eelf log file names --> + <property name="generalLogName" value="error" /> + <property name="metricsLogName" value="metrics" /> + <property name="auditLogName" value="audit" /> + <property name="debugLogName" value="debug" /> + + <property name="errorLogPattern" value="%d{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%mdc{RequestId}|%thread|data-router|%mdc{PartnerName}|%logger||%.-5level|%msg%n" /> + <property name="auditMetricPattern" value="%m%n" /> + + <property name="logDirectory" value="${logDir}/${componentName}" /> + + <!-- Example evaluator filter applied against console appender --> + <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender"> + <encoder> + <pattern>${errorLogPattern}</pattern> + </encoder> + </appender> + + <!-- ============================================================================ --> + <!-- EELF Appenders --> + <!-- ============================================================================ --> + + <!-- The EELFAppender is used to record events to the general application + log --> + + <appender name="EELF" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${generalLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.log.zip + </fileNamePattern> + <maxHistory>60</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${errorLogPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender"> + <!-- deny all events with a level below INFO, that is TRACE and DEBUG --> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + <level>INFO</level> + </filter> + <queueSize>256</queueSize> + <appender-ref ref="EELF" /> + </appender> + + <!-- EELF Audit Appender. This appender is used to record audit engine + related logging events. The audit logger and appender are specializations + of the EELF application root logger and appender. This can be used to segregate + Policy engine events from other components, or it can be eliminated to record + these events as part of the application root log. --> + + <appender name="EELFAudit" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${auditLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.log.zip + </fileNamePattern> + <maxHistory>60</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${auditMetricPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFAudit" /> + </appender> + + <appender name="EELFMetrics" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${metricsLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.log.zip + </fileNamePattern> + <maxHistory>60</maxHistory> + </rollingPolicy> + <encoder> + <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - + %msg%n"</pattern> --> + <pattern>${auditMetricPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFMetrics"/> + </appender> + + <appender name="EELFDebug" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${debugLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.log.zip + </fileNamePattern> + <maxHistory>60</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${errorLogPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFDebug" /> + <includeCallerData>false</includeCallerData> + </appender> + + <!-- ============================================================================ --> + <!-- EELF loggers --> + <!-- ============================================================================ --> + <logger name="com.att.eelf" level="info" additivity="false"> + <appender-ref ref="asyncEELF" /> + <appender-ref ref="asyncEELFDebug" /> + </logger> + + <logger name="com.att.eelf.audit" level="info" additivity="false"> + <appender-ref ref="asyncEELFAudit" /> + </logger> + <logger name="com.att.eelf.metrics" level="info" additivity="false"> + <appender-ref ref="asyncEELFMetrics" /> + </logger> + + <!-- Spring related loggers --> + <logger name="org.springframework" level="WARN" /> + <logger name="org.springframework.beans" level="WARN" /> + <logger name="org.springframework.web" level="WARN" /> + <logger name="com.blog.spring.jms" level="WARN" /> + + <!-- Data Router service loggers --> + <logger name="org.onap.aai.data-router" level="INFO" /> + + <!-- Other Loggers that may help troubleshoot --> + <logger name="net.sf" level="WARN" /> + <logger name="org.apache" level="WARN" /> + <logger name="org.apache.commons.httpclient" level="WARN" /> + <logger name="org.apache.commons" level="WARN" /> + <logger name="org.apache.coyote" level="WARN" /> + <logger name="org.apache.jasper" level="WARN" /> + + <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging. + May aid in troubleshooting) --> + <logger name="org.apache.camel" level="WARN" /> + <logger name="org.apache.cxf" level="WARN" /> + <logger name="org.apache.camel.processor.interceptor" level="WARN" /> + <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" /> + <logger name="org.apache.cxf.service" level="WARN" /> + <logger name="org.restlet" level="WARN" /> + <logger name="org.apache.camel.component.restlet" level="WARN" /> + + <!-- logback internals logging --> + <logger name="ch.qos.logback.classic" level="WARN" /> + <logger name="ch.qos.logback.core" level="WARN" /> + + <root> + <appender-ref ref="asyncEELF" /> + <!-- <appender-ref ref="asyncEELFDebug" /> --> + </root> + +</configuration> diff --git a/kubernetes/aai/charts/aai-data-router/resources/dynamic/conf/entity-event-policy.xml b/kubernetes/aai/charts/aai-data-router/resources/dynamic/conf/entity-event-policy.xml index acfe0a5933..60e71ecfb0 100644 --- a/kubernetes/aai/charts/aai-data-router/resources/dynamic/conf/entity-event-policy.xml +++ b/kubernetes/aai/charts/aai-data-router/resources/dynamic/conf/entity-event-policy.xml @@ -34,9 +34,9 @@ <property name="searchKeystore" value="tomcat_keystore" /> </bean> - <bean id="consumerBeanEntityEvent" class="org.onap.aai.event.client.DMaaPEventConsumer " > - <constructor-arg name="host" value="message-router.{{.Release.Namespace}}:3904" /> - <constructor-arg name="topic" value="AAI-EVENT" /> + <bean id="consumerBeanEntityEvent" class="org.onap.aai.event.client.DMaaPEventConsumer" > + <constructor-arg name="host" value="message-router.{{.Release.Namespace}}:{{.Values.event.port.dmaap}}" /> + <constructor-arg name="topic" value="{{.Values.event.consumer.topic}}" /> <constructor-arg name="username" value="" /> <constructor-arg name="password" value="" /> <constructor-arg name="consumerGroup" value="datarouter" /> @@ -44,6 +44,8 @@ <constructor-arg name="timeoutMs" value="1000" /> <constructor-arg name="messageLimit" value="100" /> <constructor-arg name="transportType" value="HTTPAUTH" /> + <constructor-arg name="protocol" value="{{.Values.event.protocol}}" /> + <constructor-arg name="contentType" value="application/json" /> </bean> <bean id="entityEventPolicy" class="org.onap.aai.datarouter.policy.EntityEventPolicy" init-method="startup" > diff --git a/kubernetes/aai/charts/aai-data-router/templates/configmap.yaml b/kubernetes/aai/charts/aai-data-router/templates/configmap.yaml index 6cfc3bef7a..23d3dbbcb9 100644 --- a/kubernetes/aai/charts/aai-data-router/templates/configmap.yaml +++ b/kubernetes/aai/charts/aai-data-router/templates/configmap.yaml @@ -38,3 +38,29 @@ metadata: data: {{ tpl (.Files.Glob "resources/dynamic/routes/entity-event.route").AsConfig . | indent 2 }} {{ tpl (.Files.Glob "resources/dynamic/conf/entity-event-policy.xml").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-log-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-filebeat-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
\ No newline at end of file diff --git a/kubernetes/aai/charts/aai-data-router/templates/deployment.yaml b/kubernetes/aai/charts/aai-data-router/templates/deployment.yaml index 8ab2d3383a..83542dabe5 100644 --- a/kubernetes/aai/charts/aai-data-router/templates/deployment.yaml +++ b/kubernetes/aai/charts/aai-data-router/templates/deployment.yaml @@ -94,7 +94,10 @@ spec: - mountPath: /opt/app/data-router/dynamic/conf/entity-event-policy.xml subPath: entity-event-policy.xml name: {{ include "common.fullname" . }}-dynamic-policy - - mountPath: /logs/ + - mountPath: /opt/app/data-router/bundleconfig/etc/logback.xml + name: {{ include "common.fullname" . }}-logback-config + subPath: logback.xml + - mountPath: /var/log/onap name: {{ include "common.fullname" . }}-logs ports: - containerPort: {{ .Values.service.internalPort }} @@ -112,10 +115,28 @@ spec: periodSeconds: {{ .Values.readiness.periodSeconds }} resources: {{ include "common.resources" . | indent 12 }} + + # side car containers + - name: filebeat-onap + image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - mountPath: /usr/share/filebeat/filebeat.yml + subPath: filebeat.yml + name: filebeat-conf + - mountPath: /var/log/onap + name: {{ include "common.fullname" . }}-logs + - mountPath: /usr/share/filebeat/data + name: aai-filebeat volumes: - name: localtime hostPath: path: /etc/localtime + - name: filebeat-conf + configMap: + name: aai-filebeat + - name: aai-filebeat + emptyDir: {} - name: {{ include "common.fullname" . }}-auth secret: secretName: {{ include "common.fullname" . }} @@ -134,8 +155,13 @@ spec: configMap: name: {{ include "common.fullname" . }}-dynamic - name: {{ include "common.fullname" . }}-logs - hostPath: - path: {{ .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }} + emptyDir: {} + - name: {{ include "common.fullname" . }}-logback-config + configMap: + name: {{ include "common.fullname" . }}-log-configmap + items: + - key: logback.xml + path: logback.xml restartPolicy: {{ .Values.global.restartPolicy | default .Values.restartPolicy }} imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aai/charts/aai-data-router/values.yaml b/kubernetes/aai/charts/aai-data-router/values.yaml index ba4258257a..c1fa49f3f0 100644 --- a/kubernetes/aai/charts/aai-data-router/values.yaml +++ b/kubernetes/aai/charts/aai-data-router/values.yaml @@ -17,7 +17,7 @@ # Declare variables to be passed into your templates. global: # global defaults nodePortPrefix: 302 - + loggingImage: beats/filebeat:5.5.0 # application image repository: nexus3.onap.org:10001 @@ -97,4 +97,12 @@ resources: requests: cpu: 4 memory: 8Gi - unlimited: {}
\ No newline at end of file + unlimited: {} + +# Entity Event route configuration +event: + port: + dmaap: 3905 + protocol: https + consumer: + topic: AAI-EVENT diff --git a/kubernetes/consul/resources/config/consul-agent-config/policy-health.json b/kubernetes/consul/resources/config/consul-agent-config/policy-health.json index 62a6f31223..9cad9dc1d5 100644 --- a/kubernetes/consul/resources/config/consul-agent-config/policy-health.json +++ b/kubernetes/consul/resources/config/consul-agent-config/policy-health.json @@ -67,7 +67,7 @@ "http": "https://drools:6969/healthcheck", "method": "GET", "header": { - "Authorization": ["Basic aGVhbHRoY2hlY2s6emIhWHp0RzM0"], + "Authorization": ["Basic ZGVtb0BwZW9wbGUub3NhYWYub3JnOmRlbW8xMjM0NTYh"], "Cache-Control": ["no-cache"], "Content-Type": ["application/json"], "Accept": ["application/json"] diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml index d4ee73e303..50da2cc49c 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml @@ -81,7 +81,7 @@ application_config: target_entity : "deployment_handler" # url of the deployment-handler service for policy-handler to direct the policy-updates to # - expecting dns to resolve the hostname deployment-handler to ip address - url : "http://deployment-handler:8188" + url : "https://deployment-handler:8443" # limit the size of a single data segment for policy-update messages # from policy-handler to deployment-handler in megabytes max_msg_length_mb : 5 diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml index 9c45b9f62c..10ac897046 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml @@ -63,13 +63,13 @@ postgres: # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.2 +image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.3 # DCAE component images to be deployed via Cloudify Manager # Use to override default setting in blueprints componentImages: config_binding_service: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.2.3 - datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:latest + datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.0.0 deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.0.2 holmes_rules: onap/holmes/rule-management:1.2.0-STAGING-latest holmes_engine: onap/holmes/engine-management:1.2.0-STAGING-latest diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml index 9c89b8c729..6fc62af92e 100644 --- a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml @@ -45,7 +45,7 @@ readiness: periodSeconds: 10 # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.1.0 +image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.1.2 # Resource Limit flavor -By Default using small flavor: small diff --git a/kubernetes/msb/charts/kube2msb/values.yaml b/kubernetes/msb/charts/kube2msb/values.yaml index 7532c28d8a..af845939a5 100644 --- a/kubernetes/msb/charts/kube2msb/values.yaml +++ b/kubernetes/msb/charts/kube2msb/values.yaml @@ -51,21 +51,23 @@ service: {} ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Resource Limit flavor -By Default using small +flavor: small + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 1 + memory: 1Gi + requests: + cpu: 500m + memory: 500Mi + large: + limits: + cpu: 2 + memory: 2Gi + requests: + cpu: 1 + memory: 1Gi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/msb/charts/msb-consul/values.yaml b/kubernetes/msb/charts/msb-consul/values.yaml index dd66349964..79a26404c6 100644 --- a/kubernetes/msb/charts/msb-consul/values.yaml +++ b/kubernetes/msb/charts/msb-consul/values.yaml @@ -58,21 +58,22 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +flavor: small + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 20m + memory: 100Mi + requests: + cpu: 10m + memory: 50Mi + large: + limits: + cpu: 40m + memory: 200Mi + requests: + cpu: 20m + memory: 100Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/msb/charts/msb-discovery/values.yaml b/kubernetes/msb/charts/msb-discovery/values.yaml index db04320b4f..d36c153cac 100644 --- a/kubernetes/msb/charts/msb-discovery/values.yaml +++ b/kubernetes/msb/charts/msb-discovery/values.yaml @@ -24,7 +24,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/msb/msb_discovery:1.2.0-STAGING-latest +image: onap/msb/msb_discovery:1.2.0-SNAPSHOT-latest pullPolicy: Always istioSidecar: true @@ -60,21 +60,22 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Resource Limit flavor -By Default using small +flavor: small +# Segregation for Different environment (Small and Large) +resources: + small: + limits: + cpu: 400m + memory: 400Mi + requests: + cpu: 200m + memory: 200Mi + large: + limits: + cpu: 800m + memory: 800Mi + requests: + cpu: 400m + memory: 400Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/msb/charts/msb-eag/values.yaml b/kubernetes/msb/charts/msb-eag/values.yaml index d611170e7d..cf20fdcbab 100644 --- a/kubernetes/msb/charts/msb-eag/values.yaml +++ b/kubernetes/msb/charts/msb-eag/values.yaml @@ -24,7 +24,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/msb/msb_apigateway:1.2.0-STAGING-latest +image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest pullPolicy: Always istioSidecar: true @@ -64,21 +64,22 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Resource Limit flavor -By Default using small +flavor: small +# Segregation for Different environment (Small and Large) +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 200Mi + large: + limits: + cpu: 400m + memory: 800Mi + requests: + cpu: 200m + memory: 400Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/msb/charts/msb-iag/values.yaml b/kubernetes/msb/charts/msb-iag/values.yaml index e747bff78f..b6417de382 100644 --- a/kubernetes/msb/charts/msb-iag/values.yaml +++ b/kubernetes/msb/charts/msb-iag/values.yaml @@ -24,7 +24,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/msb/msb_apigateway:1.2.0-STAGING-latest +image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest pullPolicy: Always istioSidecar: true @@ -64,21 +64,22 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Resource Limit flavor -By Default using small +flavor: small +# Segregation for Different environment (Small and Large) +resources: + small: + limits: + cpu: 100m + memory: 400Mi + requests: + cpu: 50m + memory: 200Mi + large: + limits: + cpu: 200m + memory: 800Mi + requests: + cpu: 100m + memory: 400Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/nbi/charts/mariadb/values.yaml b/kubernetes/nbi/charts/mariadb/values.yaml index dd93b924ae..dc5aa89e7d 100644 --- a/kubernetes/nbi/charts/mariadb/values.yaml +++ b/kubernetes/nbi/charts/mariadb/values.yaml @@ -80,16 +80,16 @@ flavor: small resources: small: limits: - cpu: 2 - memory: 4Gi - requests: cpu: 1 - memory: 2Gi + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi large: limits: - cpu: 4 - memory: 8Gi + cpu: 1 + memory: 1Gi requests: - cpu: 2 - memory: 4Gi + cpu: 20m + memory: 400Mi unlimited: {} diff --git a/kubernetes/onap/resources/environments/dev.yaml b/kubernetes/onap/resources/environments/dev.yaml index 4c9e7046c3..52ff536939 100644 --- a/kubernetes/onap/resources/environments/dev.yaml +++ b/kubernetes/onap/resources/environments/dev.yaml @@ -63,6 +63,8 @@ cli: enabled: false consul: enabled: false +contrib: + enabled: false dcaegen2: enabled: false dmaap: @@ -83,6 +85,8 @@ nbi: enabled: false policy: enabled: false +pomba: + enabled: false portal: enabled: false robot: diff --git a/kubernetes/onap/resources/environments/disable-allcharts.yaml b/kubernetes/onap/resources/environments/disable-allcharts.yaml index 1cf1ab1b37..dd30e1d87e 100644 --- a/kubernetes/onap/resources/environments/disable-allcharts.yaml +++ b/kubernetes/onap/resources/environments/disable-allcharts.yaml @@ -37,6 +37,8 @@ cli: enabled: false consul: enabled: false +contrib: + enabled: false dcaegen2: enabled: false dmaap: diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf index c5c35d84b9..898f2b8fb6 100644 --- a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf +++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf @@ -24,8 +24,8 @@ TRUSTSTORE_PASSWD=Pol1cy_0nap ENGINE_MANAGEMENT_PORT=9696 ENGINE_MANAGEMENT_HOST=0.0.0.0 -ENGINE_MANAGEMENT_USER=@1b3rt -ENGINE_MANAGEMENT_PASSWORD=31nst31n +ENGINE_MANAGEMENT_USER=demo@people.osaaf.org +ENGINE_MANAGEMENT_PASSWORD=demo123456! # nexus repository diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf index cbb45a5828..20d8298472 100644 --- a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf +++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf @@ -1,4 +1,4 @@ -# Copyright © 2017 Amdocs, Bell Canada, AT&T +# Copyright © 2017-2018 Amdocs, Bell Canada, AT&T # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -12,5 +12,5 @@ # See the License for the specific language governing permissions and # limitations under the License. -HEALTHCHECK_USER=healthcheck -HEALTHCHECK_PASSWORD=zb!XztG34 +HEALTHCHECK_USER=demo@people.osaaf.org +HEALTHCHECK_PASSWORD=demo123456! diff --git a/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh b/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh index e85449a6da..ff7a64bdb9 100644 --- a/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh +++ b/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh @@ -95,7 +95,7 @@ echo "PDP-D amsterdam maven coordinates .." echo echo -curl -vvv -k --silent --user @1b3rt:31nst31n -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools | python -m json.tool +curl -vvv -k --silent --user "demo@people.osaaf.org:demo123456!" -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools | python -m json.tool echo @@ -104,4 +104,4 @@ echo "PDP-D control loop updated .." echo echo -curl -v -k --silent --user @1b3rt:31nst31n -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools/facts/closedloop-amsterdam/org.onap.policy.controlloop.Params | python -m json.tool +curl -v -k --silent --user "demo@people.osaaf.org:demo123456!" -X GET https://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools/facts/closedloop-amsterdam/org.onap.policy.controlloop.Params | python -m json.tool diff --git a/kubernetes/pomba/charts/pomba-contextaggregator/resources/config/builders/ndcb.properties b/kubernetes/pomba/charts/pomba-contextaggregator/resources/config/builders/ndcb.properties index aa80aed310..f07cb65c31 100755 --- a/kubernetes/pomba/charts/pomba-contextaggregator/resources/config/builders/ndcb.properties +++ b/kubernetes/pomba/charts/pomba-contextaggregator/resources/config/builders/ndcb.properties @@ -12,7 +12,7 @@ # See the License for the specific language governing permissions and # limitations under the License. -server.host={{ .Values.config.networkdiscoveryCtxBuilderHost }} +server.host={{ .Values.global.networkdiscoveryCtxBuilderHost }} basicauth.username={{ .Values.config.networkdiscoveryCtxBuilderUsername }} basicauth.password={{ .Values.config.networkdiscoveryCtxBuilderPassword }} server.port={{ .Values.config.ctxBuilderExternalPort }} diff --git a/kubernetes/pomba/charts/pomba-contextaggregator/values.yaml b/kubernetes/pomba/charts/pomba-contextaggregator/values.yaml index 905ea87efa..9535a7ebd5 100755 --- a/kubernetes/pomba/charts/pomba-contextaggregator/values.yaml +++ b/kubernetes/pomba/charts/pomba-contextaggregator/values.yaml @@ -40,7 +40,6 @@ config: sdncCtxBuilderHost: pomba-sdncctxbuilder sdncCtxBuilderUsername: admin sdncCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30 - networkdiscoveryCtxBuilderHost: pomba-networkdiscoveryctxbuilder networkdiscoveryCtxBuilderUsername: admin networkdiscoveryCtxBuilderPassword: OBF:1u2a1toa1w8v1tok1u30 ctxBuilderExternalPort: 9530 diff --git a/kubernetes/pomba/charts/pomba-networkdiscoveryctxbuilder/resources/config/application.properties b/kubernetes/pomba/charts/pomba-networkdiscoveryctxbuilder/resources/config/application.properties index f84906e9ef..5317ab353c 100644 --- a/kubernetes/pomba/charts/pomba-networkdiscoveryctxbuilder/resources/config/application.properties +++ b/kubernetes/pomba/charts/pomba-networkdiscoveryctxbuilder/resources/config/application.properties @@ -31,6 +31,7 @@ server.tomcat.max-idle-time=60000 # Network Discovery Context Builder REST Service networkDiscoveryCtxBuilder.httpProtocol={{ .Values.config.networkDiscoveryCtxBuilderHttpProtocol }} +networkDiscoveryCtxBuilder.serviceName={{ .Values.global.networkdiscoveryCtxBuilderHost }} networkDiscoveryCtxBuilder.port={{ .Values.config.networkDiscoveryCtxBuilderPort }} # Basic Authorization credentials for Network Discovery Context Builder REST Service networkDiscoveryCtxBuilder.userId={{ .Values.config.networkDiscoveryCtxBuilderUserId }} diff --git a/kubernetes/pomba/charts/pomba-validation-service/resources/bundleconfig/etc/rules/poa-event/default-rules.groovy b/kubernetes/pomba/charts/pomba-validation-service/resources/bundleconfig/etc/rules/poa-event/default-rules.groovy index ec38724b40..f74d832449 100644 --- a/kubernetes/pomba/charts/pomba-validation-service/resources/bundleconfig/etc/rules/poa-event/default-rules.groovy +++ b/kubernetes/pomba/charts/pomba-validation-service/resources/bundleconfig/etc/rules/poa-event/default-rules.groovy @@ -87,7 +87,7 @@ entity { rule { name 'SDC-AAI-vnfc-type' - category 'INVALID_VALUE' + category 'VNFC Consistency' description 'Validate that each VNFC instance in AAI conforms to a VNFC type defined in SDC model' errorText 'AAI VNFC instance includes non-specified type in design SDC model' severity 'ERROR' @@ -102,13 +102,13 @@ rule { def aaiTypes = getVnfcTypes(slurper.parseText(aaiList.toString())) // each type in AAI must exist in SDC - return aaiTypes.containsAll(sdcTypes) + return sdcTypes.containsAll(aaiTypes) ''' } rule { name 'SDC-AAI-vnfc-node-count' - category 'INVALID_VALUE' + category 'VNFC Consistency' description 'Validate that for each VNFC node defined in SDC model, there is at least one VNFC instance in AAI' errorText 'Design has specified types but not all of them exist in AAI' severity 'WARNING' @@ -132,7 +132,7 @@ rule { rule { name 'SDC-AAI-vf-module-instance-check' - category 'INVALID_VALUE' + category 'VF Consistency' description 'Validate that each VF module instance in AAI conforms to a VF module defined in SDC service model' errorText 'One or more AAI VF module instance(s) not defined in SDC model' severity 'CRITICAL' @@ -153,7 +153,7 @@ rule { rule { name 'NDCB-AAI-attribute-comparison' - category 'INVALID_VALUE' + category 'Attribute Mismatch' description 'Verify that all attributes in Network-Discovery are the same as in AAI' errorText 'Error found with attribute "{0}"; value "{1}" does not exist in Network-Discovery' severity 'ERROR' diff --git a/kubernetes/pomba/values.yaml b/kubernetes/pomba/values.yaml index f0acaa5b88..04e89f07b3 100644 --- a/kubernetes/pomba/values.yaml +++ b/kubernetes/pomba/values.yaml @@ -22,6 +22,7 @@ global: loggingImage: beats/filebeat:5.5.0 repository: nexus3.onap.org:10001 dockerhubRepository: docker.io + networkdiscoveryCtxBuilderHost: pomba-networkdiscoveryctxbuilder # application configuration config: diff --git a/kubernetes/portal/charts/portal-app/resources/certs/keystoreONAP.keystore b/kubernetes/portal/charts/portal-app/resources/certs/keystoreONAP.keystore Binary files differnew file mode 100644 index 0000000000..ff0f0d76a4 --- /dev/null +++ b/kubernetes/portal/charts/portal-app/resources/certs/keystoreONAP.keystore diff --git a/kubernetes/portal/charts/portal-app/resources/certs/truststoreONAPall.jks b/kubernetes/portal/charts/portal-app/resources/certs/truststoreONAPall.jks Binary files differnew file mode 100644 index 0000000000..ff844b109d --- /dev/null +++ b/kubernetes/portal/charts/portal-app/resources/certs/truststoreONAPall.jks diff --git a/kubernetes/portal/charts/portal-app/resources/server/server.xml b/kubernetes/portal/charts/portal-app/resources/server/server.xml new file mode 100644 index 0000000000..09c2f8405f --- /dev/null +++ b/kubernetes/portal/charts/portal-app/resources/server/server.xml @@ -0,0 +1,147 @@ +<?xml version='1.0' encoding='utf-8'?> +<!-- + Licensed to the Apache Software Foundation (ASF) under one or more + contributor license agreements. See the NOTICE file distributed with + this work for additional information regarding copyright ownership. + The ASF licenses this file to You under the Apache License, Version 2.0 + (the "License"); you may not use this file except in compliance with + the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> +<!-- Note: A "Server" is not itself a "Container", so you may not + define subcomponents such as "Valves" at this level. + Documentation at /docs/config/server.html + --> +<Server port="8005" shutdown="SHUTDOWN"> + <Listener className="org.apache.catalina.startup.VersionLoggerListener" /> + <!-- Security listener. Documentation at /docs/config/listeners.html + <Listener className="org.apache.catalina.security.SecurityListener" /> + --> + <!--APR library loader. Documentation at /docs/apr.html --> + <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> + <!-- Prevent memory leaks due to use of particular java/javax APIs--> + <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" /> + <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> + <Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" /> + + <!-- Global JNDI resources + Documentation at /docs/jndi-resources-howto.html + --> + <GlobalNamingResources> + <!-- Editable user database that can also be used by + UserDatabaseRealm to authenticate users + --> + <Resource name="UserDatabase" auth="Container" + type="org.apache.catalina.UserDatabase" + description="User database that can be updated and saved" + factory="org.apache.catalina.users.MemoryUserDatabaseFactory" + pathname="conf/tomcat-users.xml" /> + </GlobalNamingResources> + + <!-- A "Service" is a collection of one or more "Connectors" that share + a single "Container" Note: A "Service" is not itself a "Container", + so you may not define subcomponents such as "Valves" at this level. + Documentation at /docs/config/service.html + --> + <Service name="Catalina"> + + <!--The connectors can use a shared executor, you can define one or more named thread pools--> + <!-- + <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" + maxThreads="150" minSpareThreads="4"/> + --> + + + <!-- A "Connector" represents an endpoint by which requests are received + and responses are returned. Documentation at : + Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) + Java AJP Connector: /docs/config/ajp.html + APR (HTTP/AJP) Connector: /docs/apr.html + Define a non-SSL/TLS HTTP/1.1 Connector on port 8080 + --> + <Connector port="8080" protocol="HTTP/1.1" + connectionTimeout="20000" + redirectPort="8443" /> + <!-- A "Connector" using the shared thread pool--> + <!-- + <Connector executor="tomcatThreadPool" + port="8080" protocol="HTTP/1.1" + connectionTimeout="20000" + redirectPort="8443" /> + --> + <!-- Define a SSL/TLS HTTP/1.1 Connector on port 8443 + This connector uses the NIO implementation that requires the JSSE + style configuration. When using the APR/native implementation, the + OpenSSL style configuration is required as described in the APR/native + documentation --> + <!-- + <Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol" + maxThreads="150" SSLEnabled="true" scheme="https" secure="true" + clientAuth="false" sslProtocol="TLS" /> + --> + + <Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol" + maxThreads="150" SSLEnabled="true" scheme="https" secure="true" + keystoreFile="keystoreONAP.keystore" keystorePass="{{ .Values.global.keypass }}" + clientAuth="false" sslProtocol="TLS" /> + + <!-- Define an AJP 1.3 Connector on port 8009 --> + <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> + + + <!-- An Engine represents the entry point (within Catalina) that processes + every request. The Engine implementation for Tomcat stand alone + analyzes the HTTP headers included with the request, and passes them + on to the appropriate Host (virtual host). + Documentation at /docs/config/engine.html --> + + <!-- You should set jvmRoute to support load-balancing via AJP ie : + <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> + --> + <Engine name="Catalina" defaultHost="localhost"> + + <!--For clustering, please take a look at documentation at: + /docs/cluster-howto.html (simple how to) + /docs/config/cluster.html (reference documentation) --> + <!-- + <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> + --> + + <!-- Use the LockOutRealm to prevent attempts to guess user passwords + via a brute-force attack --> + <Realm className="org.apache.catalina.realm.LockOutRealm"> + <!-- This Realm uses the UserDatabase configured in the global JNDI + resources under the key "UserDatabase". Any edits + that are performed against this UserDatabase are immediately + available for use by the Realm. --> + <Realm className="org.apache.catalina.realm.UserDatabaseRealm" + resourceName="UserDatabase"/> + </Realm> + + <Host name="localhost" appBase="webapps" + unpackWARs="true" autoDeploy="true"> + + <!-- SingleSignOn valve, share authentication between web applications + Documentation at: /docs/config/valve.html --> + <!-- + <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> + --> + + <!-- Access log processes all example. + Documentation at: /docs/config/valve.html + Note: The pattern used is equivalent to using pattern="common" --> + <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" + prefix="localhost_access_log" suffix=".txt" + pattern="%h %l %u %t "%r" %s %b" /> + + </Host> + </Engine> + </Service> +</Server>
\ No newline at end of file diff --git a/kubernetes/portal/charts/portal-app/templates/configmap.yaml b/kubernetes/portal/charts/portal-app/templates/configmap.yaml index 178e91c5fc..d4ef698f71 100644 --- a/kubernetes/portal/charts/portal-app/templates/configmap.yaml +++ b/kubernetes/portal/charts/portal-app/templates/configmap.yaml @@ -24,3 +24,5 @@ metadata: heritage: {{ .Release.Service }} data: {{ tpl (.Files.Glob "resources/config/deliveries/properties/ONAPPORTAL/*").AsConfig . | indent 2 }} +{{ tpl (.Files.Glob "resources/server/*").AsConfig . | indent 2 }} +{{ tpl (.Files.Glob "resources/certs/*").AsConfig . | indent 2 }} diff --git a/kubernetes/portal/charts/portal-app/templates/deployment.yaml b/kubernetes/portal/charts/portal-app/templates/deployment.yaml index 2ab570aab2..3fc2741556 100644 --- a/kubernetes/portal/charts/portal-app/templates/deployment.yaml +++ b/kubernetes/portal/charts/portal-app/templates/deployment.yaml @@ -55,10 +55,20 @@ spec: - "" - -n - "" + env: + - name: javax.net.ssl.keyStore + value: {{ .Values.global.env.tomcatDir }}/{{ .Values.global.truststoreFile}} + - name: javax.net.ssl.keyStorePassword + value: {{ .Values.global.keypass }} + - name: javax.net.ssl.trustStore + value: {{ .Values.global.env.tomcatDir }}/{{ .Values.global.truststoreFile}} + - name: javax.net.ssl.trustStorePassword + value: {{ .Values.global.keypass }} ports: - containerPort: {{ .Values.service.internalPort }} - containerPort: {{ .Values.service.internalPort2 }} - containerPort: {{ .Values.service.internalPort3 }} + - containerPort: {{ .Values.service.internalPort4 }} {{- if eq .Values.liveness.enabled true }} livenessProbe: tcpSocket: @@ -93,8 +103,15 @@ spec: - name: properties-onapportal mountPath: "{{ .Values.global.env.tomcatDir }}/webapps/ONAPPORTAL/WEB-INF/classes/logback.xml" subPath: logback.xml - - name: portal-tomcat-logs - mountPath: "{{ .Values.global.env.tomcatDir }}/logs" + - name: properties-onapportal + mountPath: "{{ .Values.global.env.tomcatDir }}/conf/server.xml" + subPath: server.xml + - name: properties-onapportal + mountPath: "{{ .Values.global.env.tomcatDir }}/{{ .Values.global.keystoreFile}}" + subPath: {{ .Values.global.keystoreFile}} + - name: properties-onapportal + mountPath: "{{ .Values.global.env.tomcatDir }}/{{ .Values.global.truststoreFile}}" + subPath: {{ .Values.global.truststoreFile}} - name: var-log-onap mountPath: /var/log/onap resources: diff --git a/kubernetes/portal/charts/portal-app/values.yaml b/kubernetes/portal/charts/portal-app/values.yaml index a71e0c4da3..0aba001fa4 100644 --- a/kubernetes/portal/charts/portal-app/values.yaml +++ b/kubernetes/portal/charts/portal-app/values.yaml @@ -63,6 +63,9 @@ service: externalPort3: 8010 internalPort3: 8009 nodePort3: 14 + externalPort4: 8443 + internalPort4: 8443 + nodePort4: 16 mariadb: service: diff --git a/kubernetes/portal/values.yaml b/kubernetes/portal/values.yaml index ac575b3c30..ecb7d5ecf6 100644 --- a/kubernetes/portal/values.yaml +++ b/kubernetes/portal/values.yaml @@ -20,11 +20,14 @@ global: portalPort: "8989" # application's front end hostname. Must be resolvable on the client side environment portalHostName: "portal.api.simpledemo.onap.org" + keystoreFile: "keystoreONAP.keystore" + truststoreFile: "keystoreONAPall.jks" + keypass: "changeit" config: logstashServiceName: log-ls logstashPort: 5044 - + portal-mariadb: nameOverride: portal-db diff --git a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py index a3e25e7418..ad09e444d8 100644 --- a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py @@ -57,8 +57,8 @@ GLOBAL_DMAAP_DR_NODE_SERVER_PROTOCOL = "http" GLOBAL_DMAAP_DR_NODE_SERVER_PORT = "8080" # DROOL server port and credentials GLOBAL_DROOLS_SERVER_PORT = "9696" -GLOBAL_DROOLS_USERNAME = "@1b3rt" -GLOBAL_DROOLS_PASSWORD = "31nst31n" +GLOBAL_DROOLS_USERNAME = "demo@people.osaaf.org" +GLOBAL_DROOLS_PASSWORD = "demo123456!" # log server config - NOTE: no log server is run in HEAT; only on OOM GLOBAL_LOG_SERVER_PROTOCOL = "http" GLOBAL_LOG_ELASTICSEARCH_PORT = "9200" @@ -113,8 +113,8 @@ GLOBAL_POLICY_SERVER_PORT = "8081" GLOBAL_POLICY_HEALTHCHECK_PORT = "6969" GLOBAL_POLICY_AUTH = "dGVzdHBkcDphbHBoYTEyMw==" GLOBAL_POLICY_CLIENTAUTH = "cHl0aG9uOnRlc3Q=" -GLOBAL_POLICY_USERNAME = "healthcheck" -GLOBAL_POLICY_PASSWORD = "zb!XztG34" +GLOBAL_POLICY_USERNAME = "demo@people.osaaf.org" +GLOBAL_POLICY_PASSWORD = "demo123456!" # portal info - everything is from the private oam network (also called onap private network) GLOBAL_PORTAL_SERVER_PROTOCOL = "http" GLOBAL_PORTAL_SERVER_PORT = "8989" diff --git a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py index ad74cdf913..55d8f1a92f 100644 --- a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py @@ -52,6 +52,9 @@ GLOBAL_INJECTED_OPENSTACK_API_KEY = "{{ .Values.config.openStackEncryptedPasswor GLOBAL_INJECTED_OPENSTACK_PASSWORD = "{{ .Values.openStackPassword }}" GLOBAL_INJECTED_OPENSTACK_TENANT_ID = "{{ .Values.openStackTenantId }}" GLOBAL_INJECTED_OPENSTACK_USERNAME = "{{ .Values.openStackUserName }}" +GLOBAL_INJECTED_OPENSTACK_PROJECT_NAME = "{{ .Values.openStackProjectName }}" +GLOBAL_INJECTED_OPENSTACK_DOMAIN_ID = "{{ .Values.openStackDomainId }}" +GLOBAL_INJECTED_OPENSTACK_KEYSTONE_API_VERSION = "{{ .Values.openStackKeystoneAPIVersion }}" GLOBAL_INJECTED_POLICY_IP_ADDR = "pdp.{{include "common.namespace" .}}" GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR = "drools.{{include "common.namespace" .}}" GLOBAL_INJECTED_PORTAL_IP_ADDR = "portal-app.{{include "common.namespace" .}}" @@ -119,6 +122,9 @@ GLOBAL_INJECTED_PROPERTIES = { "GLOBAL_INJECTED_OPENSTACK_PASSWORD" : "{{ .Values.openStackPassword }}", "GLOBAL_INJECTED_OPENSTACK_TENANT_ID" : "{{ .Values.openStackTenantId }}", "GLOBAL_INJECTED_OPENSTACK_USERNAME" : "{{ .Values.openStackUserName }}", + "GLOBAL_INJECTED_OPENSTACK_PROJECT_NAME" : "{{ .Values.openStackProjectName }}", + "GLOBAL_INJECTED_OPENSTACK_DOMAIN_ID" : "{{ .Values.openStackDomainId }}", + "GLOBAL_INJECTED_OPENSTACK_KEYSTONE_API_VERSION" : "{{ .Values.openStackKeystoneAPIVersion }}", "GLOBAL_INJECTED_POLICY_IP_ADDR" : "pdp.{{include "common.namespace" .}}", "GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR" : "drools.{{include "common.namespace" .}}", "GLOBAL_INJECTED_PORTAL_IP_ADDR" : "portal-app.{{include "common.namespace" .}}", diff --git a/kubernetes/robot/values.yaml b/kubernetes/robot/values.yaml index 4d320dde76..04a349f176 100755 --- a/kubernetes/robot/values.yaml +++ b/kubernetes/robot/values.yaml @@ -55,6 +55,12 @@ openStackRegion: "RegionOne" openStackTenantId: "47899782ed714295b1151681fdfd51f5" # username for Openstack tenant where VNFs will be spawned. Maps to GLOBAL_INJECTED_OPENSTACK_USERNAME openStackUserName: "tenantUsername" +# Project name of Openstack where VNFs will be spawned. Maps to GLOBAL_INJECTED_OPENSTACK_PROJECT_NAME +openStackProjectName: "onap" +# Domain id of openstack where VNFs will be deployed. Maps to GLOBAL_INJECTED_OPENSTACK_DOMAIN_ID +openStackDomainId: "default" +# Openstack Keystone API version. Valid values are [ v2.0, v3 ]. Maps to GLOBAL_INJECTED_OPENSTACK_KEYSTONE_API_VERSION +openStackKeystoneAPIVersion: "v2.0" # Openstack glance image name for Ubuntu 14. Maps to GLOBAL_INJECTED_UBUNTU_1404_IMAGE ubuntu14Image: "Ubuntu_14_trusty" # Openstack glance image name for Ubuntu 16. Maps to GLOBAL_INJECTED_UBUNTU_1604_IMAGE diff --git a/kubernetes/so/charts/so-db-secrets/templates/secrets.yaml b/kubernetes/so/charts/so-db-secrets/templates/secrets.yaml index e787b57a88..f53c67f067 100755 --- a/kubernetes/so/charts/so-db-secrets/templates/secrets.yaml +++ b/kubernetes/so/charts/so-db-secrets/templates/secrets.yaml @@ -22,10 +22,10 @@ metadata: release: {{ .Release.Name }} heritage: {{ .Release.Service }} data: - mariadb.readwrite.host : {{ .Values.db_host | b64enc | quote}} - mariadb.readwrite.port : {{ .Values.db_port | b64enc | quote}} - mariadb.readwrite.rolename: {{ .Values.db_admin_username | b64enc | quote}} - mariadb.readwrite.password: {{ .Values.db_admin_password | b64enc | quote}} - mariadb.admin.rolename: {{ .Values.db_username | b64enc | quote}} - mariadb.admin.password: {{ .Values.db_password | b64enc | quote}} + mariadb.readwrite.host : {{ .Values.db_host | b64enc | quote }} + mariadb.readwrite.port : {{ .Values.db_port | b64enc | quote }} + mariadb.readwrite.rolename: {{ .Values.db_username | b64enc | quote }} + mariadb.readwrite.password: {{ .Values.db_password | b64enc | quote }} + mariadb.admin.rolename: {{ .Values.db_admin_username| b64enc | quote }} + mariadb.admin.password: {{ .Values.db_admin_password | b64enc | quote }} type: Opaque diff --git a/kubernetes/so/charts/so-db-secrets/values.yaml b/kubernetes/so/charts/so-db-secrets/values.yaml index f3387efad3..8836802069 100644 --- a/kubernetes/so/charts/so-db-secrets/values.yaml +++ b/kubernetes/so/charts/so-db-secrets/values.yaml @@ -13,7 +13,8 @@ # limitations under the License. db_host: so-mariadb db_port: "3306" -db_admin_username: root -db_admin_password: password -db_username: root -db_password: password +db_admin_username: so_admin +db_admin_password: so_Admin123 +db_username: so_user +db_password: so_User123 + diff --git a/kubernetes/vfc/charts/vfc-catalog/values.yaml b/kubernetes/vfc/charts/vfc-catalog/values.yaml index 8ecd40bcca..8b0561e558 100644 --- a/kubernetes/vfc/charts/vfc-catalog/values.yaml +++ b/kubernetes/vfc/charts/vfc-catalog/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/catalog:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-db/values.yaml b/kubernetes/vfc/charts/vfc-db/values.yaml index 776a2816c9..83071e606e 100644 --- a/kubernetes/vfc/charts/vfc-db/values.yaml +++ b/kubernetes/vfc/charts/vfc-db/values.yaml @@ -26,8 +26,10 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 -image: onap/vfc/db:1.1.0-STAGING-latest +image: onap/vfc/db:latest pullPolicy: Always # flag to enable debugging - application support required @@ -67,21 +69,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml index 1bd86010ea..2263bff214 100644 --- a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/emsdriver:1.1.0 pullPolicy: Always @@ -73,21 +75,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml index a90c3e835c..6d2e283b24 100644 --- a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/gvnfmdriver:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml index 75a667c214..9c2c8bbbd3 100644 --- a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nfvo/svnfm/huawei:1.1.0 pullPolicy: Always @@ -71,21 +73,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml index aa6d5aaf27..cbdf9a513b 100644 --- a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/jujudriver:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml index b58ac1908b..00fd3b8b50 100644 --- a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml +++ b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/multivimproxy:1.0.0 pullPolicy: Always @@ -68,21 +70,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml index 912e80ff03..23fd17bcd8 100644 --- a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nfvo/svnfm/nokiav2:1.1.0 pullPolicy: Always @@ -70,21 +72,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 5000Mi + requests: + cpu: 100m + memory: 3000Mi + large: + limits: + cpu: 400m + memory: 7000Mi + requests: + cpu: 200m + memory: 5000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml index 90daf51dcd..23489536e4 100644 --- a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nfvo/svnfm/nokia:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-nslcm/values.yaml b/kubernetes/vfc/charts/vfc-nslcm/values.yaml index c3f6e9d0e8..7a9c8bd512 100644 --- a/kubernetes/vfc/charts/vfc-nslcm/values.yaml +++ b/kubernetes/vfc/charts/vfc-nslcm/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nslcm:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-resmgr/values.yaml b/kubernetes/vfc/charts/vfc-resmgr/values.yaml index 20f4ecdea9..36b778b5f6 100644 --- a/kubernetes/vfc/charts/vfc-resmgr/values.yaml +++ b/kubernetes/vfc/charts/vfc-resmgr/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/resmanagement:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml index 8992679c24..13f3e2fdc9 100644 --- a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml +++ b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/vnflcm:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml index f828d52893..4625127ab5 100644 --- a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml +++ b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/vnfmgr:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-vnfres/values.yaml b/kubernetes/vfc/charts/vfc-vnfres/values.yaml index 5e70487df2..005b8a5863 100644 --- a/kubernetes/vfc/charts/vfc-vnfres/values.yaml +++ b/kubernetes/vfc/charts/vfc-vnfres/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/vnfres:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml index fae22c67c5..2a486da1e2 100644 --- a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml +++ b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/wfengine-activiti:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-workflow/values.yaml b/kubernetes/vfc/charts/vfc-workflow/values.yaml index 4be7845aa3..050e58fafe 100644 --- a/kubernetes/vfc/charts/vfc-workflow/values.yaml +++ b/kubernetes/vfc/charts/vfc-workflow/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/wfengine-mgrservice:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml index 3ea6f8d77d..4c9dbaab10 100644 --- a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/ztesdncdriver:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {}
\ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml index e0e47882a5..288d86fa45 100644 --- a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/ztevnfmdriver:1.1.0 pullPolicy: Always @@ -68,21 +70,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 100m + memory: 500Mi + requests: + cpu: 50m + memory: 250Mi + large: + limits: + cpu: 200m + memory: 1000Mi + requests: + cpu: 100m + memory: 500Mi + unlimited: {}
\ No newline at end of file |