diff options
Diffstat (limited to 'kubernetes')
| -rw-r--r-- | kubernetes/Makefile | 7 | ||||
| -rw-r--r-- | kubernetes/README.md | 133 | ||||
| -rw-r--r-- | kubernetes/README_HELM | 20 |
3 files changed, 78 insertions, 82 deletions
diff --git a/kubernetes/Makefile b/kubernetes/Makefile index f3e50e4347..7ba5ba934a 100644 --- a/kubernetes/Makefile +++ b/kubernetes/Makefile @@ -52,5 +52,12 @@ clean: @rm -f */requirements.lock @rm -f *tgz */charts/*tgz @rm -rf $(PACKAGE_DIR) + +# start up a local helm repo to serve up +repo: + @mkdir -p $(PACKAGE_DIR) + @helm serve --repo-path $(PACKAGE_DIR) & + @helm repo index $(PACKAGE_DIR) + @helm repo add local http://127.0.0.1:8879 %: @: diff --git a/kubernetes/README.md b/kubernetes/README.md index dc49e5445b..9c315cbafe 100644 --- a/kubernetes/README.md +++ b/kubernetes/README.md @@ -1,78 +1,87 @@ -## **Quick Start Guide - ONAP on Kubernetes** +## **Quick Start Guide** -This is a quick start guide to help you get started on ONAP installation. Creating an ONAP deployment instance requires creating base configuration on the host node and then deploying the runtime containers. +This is a quick start guide describing how to deploy ONAP on Kubernetes using Helm. Pre-requisites: - Your Kubernetes environment must be available. For more information see, [ONAP on Kubernetes](https://wiki.onap.org/display/DW/ONAP+on+Kubernetes). - Deployment artifacts are customized for your location. -Step 1 -Review and optionally change configuration parameters: - -Setup the [/oom/kubernetes/config/onap-parameters.yaml](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters.yaml;h=7ddaf4d4c3dccf2fad515265f0da9c31ec0e64b1;hb=refs/heads/master) file with key-value pairs specific to your OpenStack environment. - -OR - -There is a [sample](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters-sample.yaml;h=3a74beddbbf7f9f9ec8e5a6abaecb7cb238bd519;hb=refs/heads/master) that may help you out or even be usable directly if you don't intend to actually use OpenStack resources. - - -Step 2 - -In-order to be able to support multiple ONAP instances within a single kubernetes environment, a configuration set is required. To do this, execute the [createConfig.sh](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/createConfig.sh;h=f226ccae47ca6de15c1da49be4b8b6de974895ed;hb=refs/heads/master) script: - -> oom/kubernetes/config/createConfig.sh -n onap - -Where: -'onap' refers to the name of the instance. This serves as the Namespace prefix for each deployed ONAP component (for example, onap-mso). - -Step 3 - -The bash script [createAll.bash](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/oneclick/createAll.bash;h=5e5f2dc76ea7739452e757282e750638b4e3e1de;hb=refs/heads/master) is used to create an ONAP deployment with kubernetes. It has two primary functions: - -- Creating the namespaces used to encapsulate the ONAP components, and -- Creating the services, pods and containers within each of these namespaces that provide the core functionality of ONAP. - -Before you execute the createAll.bash. script, pod config-init ([pod-config-init.yaml](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/pod-config-init.yaml;h=b1285ce21d61815c082f6d6aa3c43d00561811c7;hb=refs/heads/master)) may need editing to match your environment and deployment into the default namespace. - -To deploy the containers and create your ONAP system, execute the following command: - -> oom/kubernetes/oneclick/createAll.bash -n onap - -#### **Additional information on usage of createAll.bash** - -Namespaces provide isolation between ONAP components as ONAP release 1.0 contains duplicate application (for example, mariadb) and port usage. - -As such createAll.bash requires the user to enter a namespace prefix string that can be used to separate multiple deployments of onap. The result will be set of 10 namespaces (for example, onap-sdc, onap-aai, onap-mso, onap-message-router, onap-robot, onap-vid, onap-sdnc, onap-portal, onap-policy, onap-appc) being created within the kubernetes environment. - - -#### **Deploying multiple ONAP instances within the same Kubernetes cluster** - -To deploy multiple ONAP instances, you must specify the number of Instances you would like to create in a Kubernetes cluster using createAllbash. - -This is currently required due to the use of NodePort ranges. NodePorts allow external IP:Port access to containers that are running inside a Kubernetes cluster. - -To create multiple instances of an ONAP deployment in the cluster, use the following commands: - -> oom/kubernetes/config/createConfig.sh -n onap - -> oom/kubernetes/oneclick/createAll.bash -n onap -i 2 - -Where: - -- 'onap' refers to the name of the instance. - -- ‘i 2’ refers to the number of instances of an ONAP deployment in the cluster. - -#### **To delete a deployed instance** +### **Deploy ONAP Instance** + +Step 1. Clone the OOM repository from ONAP gerrit: + +``` +> git clone http://gerrit.onap.org/r/oom +> cd oom/kubernetes +``` + +Step 2. Customize the oom/kubernetes/onap parent chart, like the values.yaml file, to suit your deployment. You may want to selectively enable or disable ONAP components by changing the subchart **enabled** flags to *true* or *false*. +``` +Example: +... +robot: # Robot Health Check + enabled: true +sdc: + enabled: false +sdnc: + enabled: false +so: # Service Orchestrator + enabled: true +... +``` + +Step 3. To setup a local Helm repository to serve up the local ONAP charts: +``` +> helm serve & +``` +Note the port number that is listed and use it in the Helm repo add as follows: +``` +> helm repo add local http://127.0.0.1:8879 +``` + +Step 4. Build a local Helm repository (from the kubernetes directory): +``` +> make all +``` + +Step 5. Display the charts that are available to be deployed: +``` +> helm search -l +NAME VERSION DESCRIPTION +local/appc 2.0.0 Application Controller +local/clamp 2.0.0 ONAP Clamp +local/onap 2.0.0 Open Network Automation Platform (ONAP) +local/robot 2.0.0 A helm Chart for kubernetes-ONAP Robot +local/so 2.0.0 ONAP Service Orchestrator +... +``` + +**Note:** +Setup of this Helm repository is a one time activity. If you make changes to your deployment charts or values be sure to use **make** to update your local Helm repository. + +Step 6. Once the repo is setup, installation of ONAP can be done with a single command: +``` +> helm install local/onap -name dev --namespace onap +``` +**Note:** the **--namespace onap** is currently required while all onap helm charts are migrated to version 2.0. After this activity is complete, namespaces will be optional. + +Use the following to monitor your deployment and determine when ONAP is ready for use: +``` +> kubectl get pods --all-namespaces -o=wide +``` + + +#### **Cleanup deployed ONAP instance** To delete a deployed instance, use the following command: +``` +> helm del dev --purge +``` -> oom/kubernetes/oneclick/deleteAll.bash -n onap -**Note:** Deleting the runtime containers does not remove the configuration created in step 2. For more information on OOM project documentation, refer to: diff --git a/kubernetes/README_HELM b/kubernetes/README_HELM deleted file mode 100644 index 0f65120397..0000000000 --- a/kubernetes/README_HELM +++ /dev/null @@ -1,20 +0,0 @@ -Prerequisites: -- K8s -- Helm - -In order to use Helm with Rancher, check the tiller version installed -by running "helm version" on the rancher CLI -and install the appropriate Helm. -Notice both tiller and helm are installed, -but you will need to install on your VM. - -charts were tested with the following setup: - Rancher Release v1.6.7 - k8s version 1.7.2 - Helm/Tiller version v2.3.0 -also tested on: - k8s version v1.5.2 - Helm/Tiller v2.6.0 - -Download Helm: -https://github.com/kubernetes/helm |