diff options
Diffstat (limited to 'kubernetes')
66 files changed, 603 insertions, 642 deletions
diff --git a/kubernetes/aai b/kubernetes/aai -Subproject 55cb73cadc59537643c0fe5cb7ededadc9ff2b4 +Subproject fde14dd1e9fec136f6ff9489dcb66ed8102ddb1 diff --git a/kubernetes/appc/resources/config/appc/opt/onap/appc/data/properties/bath_config.csv b/kubernetes/appc/resources/config/appc/opt/onap/appc/data/properties/bath_config.csv new file mode 100644 index 0000000000..24a3dff7e2 --- /dev/null +++ b/kubernetes/appc/resources/config/appc/opt/onap/appc/data/properties/bath_config.csv @@ -0,0 +1,8 @@ +# APPC HELM CHART APPC_RESTCONF_UI -> appc@appc.onap.org +Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==,Basic YXBwY0BhcHBjLm9uYXAub3JnOmRlbW8xMjM0NTYh,2050-03-03 +# jolokiaall = demo@people.osaaf.org +Basic am9sb2tpYWFsbDpqb2xva2lhYWxs,Basic ZGVtb0BwZW9wbGUub3NhYWYub3JnOmRlbW8xMjM0NTYh,2050-03-03 +# restall = aaf_admin@people.osaaf.org +Basic cmVzdGFsbDpyZXN0YWxs,Basic YWFmX2FkbWluQHBlb3BsZS5vc2FhZi5vcmc6ZGVtbzEyMzQ1NiE=,2050-03-03 +# odlro = mmmanger@people.osaaf.org +Basic b2Rscm86b2Rscm8=,Basic bW1tYW5nZXJAcGVvcGxlLm9zYWFmLm9yZzpkZW1vMTIzNDU2IQ==,2050-03-03 diff --git a/kubernetes/appc/templates/statefulset.yaml b/kubernetes/appc/templates/statefulset.yaml index 4fded9aa24..5b4f63bfa7 100644 --- a/kubernetes/appc/templates/statefulset.yaml +++ b/kubernetes/appc/templates/statefulset.yaml @@ -108,6 +108,9 @@ spec: - mountPath: /opt/onap/appc/data/properties/aaa-app-config.xml name: onap-appc-data-properties subPath: aaa-app-config.xml + - mountPath: /opt/onap/appc/data/properties/bath_config.csv + name: onap-appc-data-properties + subPath: bath_config.csv - mountPath: /opt/onap/appc/svclogic/config/svclogic.properties name: onap-appc-svclogic-config subPath: svclogic.properties diff --git a/kubernetes/cds/charts/cds-blueprints-processor/resources/config/application.properties b/kubernetes/cds/charts/cds-blueprints-processor/resources/config/application.properties index 6cb952f460..c53b401bf9 100755 --- a/kubernetes/cds/charts/cds-blueprints-processor/resources/config/application.properties +++ b/kubernetes/cds/charts/cds-blueprints-processor/resources/config/application.properties @@ -48,7 +48,7 @@ blueprintsprocessor.blueprintArchivePath=/opt/app/onap/blueprints/archive blueprintsprocessor.blueprintWorkingPath=/opt/app/onap/blueprints/work # Primary Database Configuration -blueprintsprocessor.db.url=jdbc:mysql://db:3306/sdnctl +blueprintsprocessor.db.url=jdbc:mysql://cds-db:3306/sdnctl blueprintsprocessor.db.username=sdnctl blueprintsprocessor.db.password=sdnctl blueprintsprocessor.db.driverClassName=org.mariadb.jdbc.Driver @@ -91,7 +91,7 @@ blueprintsprocessor.restclient.config-data.password=Kp8bJ4SXszM0WXlhak3eHlcse2gA # AAI Data REST Client settings blueprintsprocessor.restclient.aai-data.type=basic-auth -blueprintsprocessor.restclient.aai-data.url=https://aai.onap:8443 +blueprintsprocessor.restclient.aai-data.url=https://aai:8443 blueprintsprocessor.restclient.aai-data.username=aai@aai.onap.org blueprintsprocessor.restclient.aai-data.password=demo123456! @@ -101,7 +101,6 @@ blueprintsprocessor.messageclient.self-service-api.type=kafka-basic-auth ##ONAP Message Router Kafka Service## blueprintsprocessor.messageclient.self-service-api.bootstrapServers=message-router-kafka:9092 - blueprintsprocessor.messageclient.self-service-api.consumerTopic=cds-consumer blueprintsprocessor.messageclient.self-service-api.groupId=cds-consumer-group blueprintsprocessor.messageclient.self-service-api.clientId=cds-client diff --git a/kubernetes/cds/charts/cds-blueprints-processor/values.yaml b/kubernetes/cds/charts/cds-blueprints-processor/values.yaml index 29eeb19477..03537e7106 100755 --- a/kubernetes/cds/charts/cds-blueprints-processor/values.yaml +++ b/kubernetes/cds/charts/cds-blueprints-processor/values.yaml @@ -1,7 +1,5 @@ # Copyright (c) 2019 IBM, Bell Canada # -# Modifications Copyright (c) 2019 Bell Canada. -# # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at diff --git a/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml b/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml index 996d218ada..26affe600c 100644 --- a/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml +++ b/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml @@ -129,18 +129,26 @@ http.port: {{.Values.service.externalPort}} # Defaults to 9300-9400. # More info: transport.tcp.port: {{.Values.service.externalPort2}} - #xpack.graph.enabled: false #Set to false to disable X-Pack graph features. - #xpack.ml.enabled: false #Set to false to disable X-Pack machine learning features. - #xpack.monitoring.enabled: false #Set to false to disable X-Pack monitoring features. -#xpack.security.enabled: false -#Set to false to disable X-Pack security features. #xpack.watcher.enabled: false #Set to false to disable Watcher. + +#xpack.license.self_generated.type: basic +#xpack.security.enabled: false + +## Search Guard +# +searchguard.enterprise_modules_enabled: false +searchguard.ssl.transport.keystore_filepath: sg/node-0-keystore.jks +searchguard.ssl.transport.truststore_filepath: sg/truststore.jks +searchguard.ssl.transport.enforce_hostname_verification: false + +searchguard.authcz.admin_dn: + - "CN=kirk,OU=client,O=client,l=tEst,C=De" diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml index d1504e0c04..5070f24ba3 100644 --- a/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml +++ b/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml @@ -58,7 +58,7 @@ spec: mountPath: /usr/share/elasticsearch/data/ containers: - name: {{ include "common.name" . }} - image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}" + image: "{{ include "common.repository" . }}/{{ .Values.image }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} ports: - containerPort: {{ .Values.service.internalPort }} diff --git a/kubernetes/clamp/charts/clamp-dash-es/values.yaml b/kubernetes/clamp/charts/clamp-dash-es/values.yaml index f385128f92..2d67048844 100644 --- a/kubernetes/clamp/charts/clamp-dash-es/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-es/values.yaml @@ -32,7 +32,7 @@ busyboxImage: library/busybox:latest # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-elasticsearch:4.1.0 +image: onap/clamp-dashboard-elasticsearch:4.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -77,7 +77,7 @@ persistence: ## If undefined (the default) or set to null, no storageClassName spec is ## set, choosing the default provisioner. (gp2 on AWS, standard on ## GKE, AWS & OpenStack) - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 4Gi mountPath: /dockerdata-nfs mountSubPath: clamp/dashboard-elasticsearch/data diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml b/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml index 2173039252..55df82b0f1 100644 --- a/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml +++ b/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml @@ -128,7 +128,7 @@ server.ssl.key: {{.Values.config.sslPemkeyFilePath}} ## Search Guard # -xpack.security.enabled: false +#xpack.security.enabled: false elasticsearch.username: {{.Values.config.elasticUSR}} elasticsearch.password: {{.Values.config.elasticPWD}} diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml index 276ac5d32a..9777b7c0ae 100644 --- a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml @@ -34,7 +34,7 @@ busyboxImage: library/busybox:latest # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-kibana:4.1.0 +image: onap/clamp-dashboard-kibana:4.1.1 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml b/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml index e7ab68fc5b..7fd8641bad 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml @@ -30,7 +30,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-logstash:4.1.0 +image: onap/clamp-dashboard-logstash:4.1.1 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql index 5d6f14f5c6..9b12b1804c 100644 --- a/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql +++ b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql @@ -20,6 +20,7 @@ create table loop_logs ( id bigint not null, + log_component varchar(255) not null, log_instant datetime(6) not null, log_type varchar(255) not null, message MEDIUMTEXT not null, @@ -36,6 +37,7 @@ global_properties_json json, last_computed_state varchar(255) not null, model_properties_json json, + operational_policy_schema json, svg_representation MEDIUMTEXT, primary key (name) ) engine=InnoDB; diff --git a/kubernetes/clamp/values.yaml b/kubernetes/clamp/values.yaml index 030460401f..21255d1c5b 100644 --- a/kubernetes/clamp/values.yaml +++ b/kubernetes/clamp/values.yaml @@ -30,7 +30,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/clamp:4.1.0 +image: onap/clamp-backend:4.1.0 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/common/common/templates/_ingress.tpl b/kubernetes/common/common/templates/_ingress.tpl index 9b274ad190..49d7eeb415 100644 --- a/kubernetes/common/common/templates/_ingress.tpl +++ b/kubernetes/common/common/templates/_ingress.tpl @@ -6,12 +6,12 @@ backend: serviceName: {{ .name }} servicePort: {{ .port }} -{{- end }} +{{- end -}} {{- else -}} - - path: {{ printf "/%s" .Chart.Name }} - backend: - serviceName: {{ .Chart.Name }} - servicePort: {{ .Values.service.externalPort }} + - path: {{ printf "/%s" .Chart.Name }} + backend: + serviceName: {{ .Chart.Name }} + servicePort: {{ .Values.service.externalPort }} {{- end -}} {{- end -}} {{- end -}} @@ -44,7 +44,7 @@ spec: rules: - http: paths: - {{- include "ingress.config.port" . }} + {{- include "ingress.config.port" . }} {{- if .Values.ingress.tls }} tls: {{ toYaml .Values.ingress.tls | indent 4 }} diff --git a/kubernetes/common/mariadb-galera/templates/backup/cronjob.yaml b/kubernetes/common/mariadb-galera/templates/backup/cronjob.yaml new file mode 100644 index 0000000000..7d3ec75c00 --- /dev/null +++ b/kubernetes/common/mariadb-galera/templates/backup/cronjob.yaml @@ -0,0 +1,178 @@ +{{/* +# Copyright © 2019 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if .Values.backup.enabled }} +apiVersion: batch/v1beta1 +kind: CronJob +metadata: + name: {{ include "common.fullname" . }}-backup + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.fullname" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + schedule: {{ .Values.backup.cron | quote }} + concurrencyPolicy: Forbid + startingDeadlineSeconds: 120 + jobTemplate: + spec: + template: + spec: + restartPolicy: Never + initContainers: + - command: + - /root/ready.py + args: + - --container-name + - {{ include "common.name" . }} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + - name: mariadb-galera-backup-init + image: "{{ include "common.repository" . }}/{{ .Values.backupImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /bin/bash + - -c + - | + remove_dir(){ + dirToRemove=$1 + rm -rf $dirToRemove + echo "Failed" > /backup/backup.log + echo "Backup failed!!!" + } + + target_dir=/backup/backup-`date +%s` + mkdir -p $target_dir + + mysqlhost={{ include "common.fullname" . }}-{{ sub .Values.replicaCount 1 }}.{{ .Values.service.name }} + + mariabackup --backup --target-dir=$target_dir --user=root --password=$DB_PASS --host=$mysqlhost + + ret_code=$? + if [ $ret_code -ne 0 ]; then + remove_dir $target_dir + exit 0 + fi + + echo "Starting Backup Preparation!!!" + mariabackup --prepare --target-dir=$target_dir + ret_code=$? + if [ $ret_code -ne 0 ]; then + remove_dir $target_dir + exit 0 + fi + echo "Success" > /backup/backup.log + echo "Backup Successful!!!" + env: + - name: DB_PASS + valueFrom: + secretKeyRef: + name: {{ include "common.fullname" . }} + key: db-root-password + volumeMounts: + - name: backup-data + mountPath: /backup + - name: db-data + mountPath: /var/lib/mysql + containers: + - name: mariadb-backup-validate + image: "{{ include "common.repository" . }}/{{ .Values.backupImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + env: + - name: MYSQL_ROOT_PASSWORD + valueFrom: + secretKeyRef: + name: {{ include "common.fullname" . }} + key: db-root-password + command: + - /bin/bash + - -c + - | + remove_dir(){ + dirToRemove=$1 + rm -rf $dirToRemove + echo "Validation Failed!!!"; + } + + backup_result=`cat /backup/backup.log` + rm -rf /backup/backup.log + + if [ "$backup_result" == "Failed" ]; then + echo "Backup Failed!!! So Validation Failed!!!"; + exit 0 + fi + + target_dir=$(ls -td -- /backup/backup-* | head -n 1) + cp -Ra $target_dir/* /var/lib/mysql/ + + if [ ! "$(ls -A /var/lib/mysql)" ]; then + remove_dir $target_dir + exit 0 + fi + + /docker-entrypoint.sh mysqld & + + count=0 + until mysql --user=root --password=$MYSQL_ROOT_PASSWORD -e "SELECT 1"; + do sleep 3; + count=`expr $count + 1`; + if [ $count -ge 30 ]; then + remove_dir $target_dir + exit 0; + fi; + done + + mysqlcheck -A --user=root --password=$MYSQL_ROOT_PASSWORD > /tmp/output.log + error_lines=`cat /tmp/output.log| grep -v "OK" | wc -l` + + cat /tmp/output.log + + if [ $error_lines -gt 1 ];then + remove_dir $target_dir + else + echo "Validation successful!!!" + cd /backup + totalFiles=`ls -t | grep "backup-" | wc -l` + if [ $totalFiles -gt {{ .Values.backup.retentionPeriod }} ]; then + filestoDelete=`expr $totalFiles - {{ .Values.backup.retentionPeriod }}` + ls -tr | grep backup | head -$filestoDelete | xargs rm -rf + fi + fi + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - name: backup-data + mountPath: /backup + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: db-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }}-db-data + - name: backup-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }}-backup +{{- end }} diff --git a/kubernetes/common/mariadb-galera/templates/backup/pv.yaml b/kubernetes/common/mariadb-galera/templates/backup/pv.yaml new file mode 100644 index 0000000000..2972191563 --- /dev/null +++ b/kubernetes/common/mariadb-galera/templates/backup/pv.yaml @@ -0,0 +1,59 @@ +{{/* +# Copyright © 2019 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if .Values.backup.enabled }} +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-backup + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }}-backup +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.backup.mountPath | default .Values.persistence.backup.mountPath }}/{{ include "common.namespace" . }}/{{include "common.name" . }} +--- +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-db-data + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }}-db-data +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}{{ sub .Values.replicaCount 1 }} +{{- end -}} +{{- end -}} + diff --git a/kubernetes/common/mariadb-galera/templates/backup/pvc.yaml b/kubernetes/common/mariadb-galera/templates/backup/pvc.yaml new file mode 100644 index 0000000000..a983c8af98 --- /dev/null +++ b/kubernetes/common/mariadb-galera/templates/backup/pvc.yaml @@ -0,0 +1,81 @@ +{{/* +# Copyright © 2019 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if .Values.backup.enabled }} +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-backup + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }}-backup + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + selector: + matchLabels: + name: {{ include "common.fullname" . }}-backup + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- if .Values.persistence.storageClass }} +{{- if (eq "-" .Values.persistence.storageClass) }} + storageClassName: "" +{{- else }} + storageClassName: "{{ .Values.persistence.storageClass }}" +{{- end }} +{{- end }} +--- +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-db-data + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }}-db-data + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + selector: + matchLabels: + name: {{ include "common.fullname" . }}-db-data + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- if .Values.persistence.storageClass }} +{{- if (eq "-" .Values.persistence.storageClass) }} + storageClassName: "" +{{- else }} + storageClassName: "{{ .Values.persistence.storageClass }}" +{{- end }} +{{- end }} +{{- end -}} +{{- end -}} + diff --git a/kubernetes/common/mariadb-galera/values.yaml b/kubernetes/common/mariadb-galera/values.yaml index d91f4fd1bb..a662b1e04a 100644 --- a/kubernetes/common/mariadb-galera/values.yaml +++ b/kubernetes/common/mariadb-galera/values.yaml @@ -17,9 +17,16 @@ ################################################################# global: nodePortPrefix: 302 - persistence: {} + persistence: + mountPath: /dockerdata-nfs + backup: + mountPath: /dockerdata-nfs/backup + repository: nexus3.onap.org:10001 + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.2 + ################################################################# # Application configuration defaults. @@ -28,6 +35,7 @@ global: #repository: mysql repository: nexus3.onap.org:10001 image: adfinissygroup/k8s-mariadb-galera-centos:v002 +backupImage: library/mariadb:10.1.38 imageInit: busybox pullPolicy: IfNotPresent @@ -77,11 +85,13 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: "mariadb-galera/data" mysqlPath: /var/lib/mysql + backup: + mountPath: /dockerdata-nfs/backup service: internalPort: 3306 @@ -139,3 +149,8 @@ nameOverride: mariadb-galera # DNS name for mariadb-galera cluster - should be unique accross all projects other clusters #dnsnameOverride: mariadb-galera + +backup: + enabled: false + cron: "00 00 * * *" + retentionPeriod: 3 diff --git a/kubernetes/common/mongo/values.yaml b/kubernetes/common/mongo/values.yaml index d6938c1ebb..8a681296ce 100644 --- a/kubernetes/common/mongo/values.yaml +++ b/kubernetes/common/mongo/values.yaml @@ -71,7 +71,7 @@ persistence: ## If undefined (the default) or set to null, no storageClassName spec is ## set, choosing the default provisioner. (gp2 on AWS, standard on ## GKE, AWS & OpenStack) - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 1Gi mountPath: /dockerdata-nfs mountSubPath: "mongo/data" diff --git a/kubernetes/consul/resources/config/consul-agent-config/multicloud-health-check.json b/kubernetes/consul/resources/config/consul-agent-config/multicloud-health-check.json index 7bc9ff090f..f6e48fac6b 100644 --- a/kubernetes/consul/resources/config/consul-agent-config/multicloud-health-check.json +++ b/kubernetes/consul/resources/config/consul-agent-config/multicloud-health-check.json @@ -17,20 +17,6 @@ "timeout": "1s" }, { - "id": "multicloud-ocata", - "name": "Multicloud Ocata Health Check", - "http": "http://multicloud-ocata:9006/api/multicloud-ocata/v0/swagger.json", - "method": "HEAD", - "header": { - "Cache-Control": ["no-cache"], - "Content-Type": ["application/json"], - "Accept": ["application/json"] - }, - "tls_skip_verify": true, - "interval": "15s", - "timeout": "1s" - }, - { "id": "multicloud-pike", "name": "Multicloud Pike Health Check", "http": "http://multicloud-pike:9007/api/multicloud-pike/v0/swagger.json", diff --git a/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml index 19fe038d44..5496aee2cb 100644 --- a/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml @@ -104,6 +104,14 @@ spec: value: "/opt/tls/cert.pem" - name: HTTPS_KEY_PATH value: "/opt/tls/key.pem" + - name: TRUST_STORE_PATH + value: "/opt/app/prh/etc/cert/trust.jks" + - name: TRUST_STORE_PASS_PATH + value: "/opt/app/prh/etc/cert/trust.pass" + - name: KEY_STORE_PATH + value: "/opt/app/prh/etc/cert/key.p12" + - name: KEY_STORE_PASS_PATH + value: "/opt/app/prh/etc/cert/key.pass" - name: {{ include "common.name" . }}-filebeat-onap image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} diff --git a/kubernetes/dmaap/components/dmaap-bc/templates/post-install-job.yaml b/kubernetes/dmaap/components/dmaap-bc/templates/post-install-job.yaml index d01987448c..52c5566061 100644 --- a/kubernetes/dmaap/components/dmaap-bc/templates/post-install-job.yaml +++ b/kubernetes/dmaap/components/dmaap-bc/templates/post-install-job.yaml @@ -6,6 +6,7 @@ metadata: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} annotations: # This is what defines this resource as a hook. Without this line, the # job is considered part of the release. @@ -20,6 +21,7 @@ spec: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} spec: restartPolicy: Never diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml index 92349b8bf2..ede3f4999c 100644 --- a/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml @@ -6,6 +6,7 @@ metadata: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} annotations: # This is what defines this resource as a hook. Without this line, the # job is considered part of the release. @@ -20,6 +21,7 @@ spec: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} spec: restartPolicy: Never containers: diff --git a/kubernetes/dmaap/components/dmaap-dr-node/values.yaml b/kubernetes/dmaap/components/dmaap-dr-node/values.yaml index 723d977867..872482b3d6 100644 --- a/kubernetes/dmaap/components/dmaap-dr-node/values.yaml +++ b/kubernetes/dmaap/components/dmaap-dr-node/values.yaml @@ -54,7 +54,7 @@ readiness: ## Persist data to a persitent volume persistence: volumeReclaimPolicy: Retain - accessMode: ReadWriteMany + accessMode: ReadWriteOnce mountPath: /dockerdata-nfs spoolMountSubPath: data-router/dr-node/spool-data diff --git a/kubernetes/dmaap/components/dmaap-dr-prov/templates/post-install-job.yaml b/kubernetes/dmaap/components/dmaap-dr-prov/templates/post-install-job.yaml index e411b2b4e7..7b71bb03a2 100644 --- a/kubernetes/dmaap/components/dmaap-dr-prov/templates/post-install-job.yaml +++ b/kubernetes/dmaap/components/dmaap-dr-prov/templates/post-install-job.yaml @@ -6,6 +6,7 @@ metadata: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} annotations: # This is what defines this resource as a hook. Without this line, the # job is considered part of the release. @@ -20,6 +21,7 @@ spec: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} spec: restartPolicy: Never containers: diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-kafka/values.yaml b/kubernetes/dmaap/components/message-router/charts/message-router-kafka/values.yaml index f0d07ae340..f5a7c7ebb5 100644 --- a/kubernetes/dmaap/components/message-router/charts/message-router-kafka/values.yaml +++ b/kubernetes/dmaap/components/message-router/charts/message-router-kafka/values.yaml @@ -97,7 +97,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: message-router/data-kafka @@ -110,7 +110,7 @@ service: externalPort: 9093 baseNodePort: 30490 - + ingress: enabled: false @@ -134,4 +134,3 @@ resources: cpu: 1000m memory: 2Gi unlimited: {} - diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/values.yaml b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/values.yaml index 4c5541bf2e..734736d193 100644 --- a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/values.yaml +++ b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/values.yaml @@ -92,7 +92,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: message-router/data-zookeeper diff --git a/kubernetes/dmaap/components/message-router/templates/post-install-job.yaml b/kubernetes/dmaap/components/message-router/templates/post-install-job.yaml index b6f75d57cd..f428491127 100644 --- a/kubernetes/dmaap/components/message-router/templates/post-install-job.yaml +++ b/kubernetes/dmaap/components/message-router/templates/post-install-job.yaml @@ -6,6 +6,7 @@ metadata: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} annotations: # This is what defines this resource as a hook. Without this line, the # job is considered part of the release. @@ -20,6 +21,7 @@ spec: app.kubernetes.io/managed-by: {{.Release.Service | quote }} app.kubernetes.io/instance: {{.Release.Name | quote }} helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + release: {{ .Release.Name }} spec: restartPolicy: Never containers: diff --git a/kubernetes/helm/plugins/deploy/deploy.sh b/kubernetes/helm/plugins/deploy/deploy.sh index 3416a02596..1622689386 100755 --- a/kubernetes/helm/plugins/deploy/deploy.sh +++ b/kubernetes/helm/plugins/deploy/deploy.sh @@ -109,6 +109,12 @@ deploy() { FLAGS="$(echo $FLAGS| sed -n 's/--verbose//p')" VERBOSE="true" fi + # determine if delay for deployment is enabled + DELAY="false" + if [[ $FLAGS = *"--delay"* ]]; then + FLAGS="$(echo $FLAGS| sed -n 's/--delay//p')" + DELAY="true" + fi # determine if set-last-applied flag is enabled SET_LAST_APPLIED="false" if [[ $FLAGS = *"--set-last-applied"* ]]; then @@ -238,6 +244,10 @@ deploy() { > $LOG_FILE.log 2>&1 fi fi + if [[ $DELAY == "true" ]]; then + echo sleep 3m + sleep 3m + fi else array=($(echo "$ALL_HELM_RELEASES" | grep "${RELEASE}-${subchart}")) n=${#array[*]} diff --git a/kubernetes/multicloud/charts/multicloud-ocata/.helmignore b/kubernetes/multicloud/charts/multicloud-ocata/.helmignore deleted file mode 100644 index f0c1319444..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/.helmignore +++ /dev/null @@ -1,21 +0,0 @@ -# Patterns to ignore when building packages. -# This supports shell glob matching, relative path matching, and -# negation (prefixed with !). Only one pattern per line. -.DS_Store -# Common VCS dirs -.git/ -.gitignore -.bzr/ -.bzrignore -.hg/ -.hgignore -.svn/ -# Common backup files -*.swp -*.bak -*.tmp -*~ -# Various IDEs -.project -.idea/ -*.tmproj diff --git a/kubernetes/multicloud/charts/multicloud-ocata/Chart.yaml b/kubernetes/multicloud/charts/multicloud-ocata/Chart.yaml deleted file mode 100644 index 85be0151b3..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/Chart.yaml +++ /dev/null @@ -1,19 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -description: ONAP multicloud OpenStack Ocata Plugin -name: multicloud-ocata -version: 5.0.0 diff --git a/kubernetes/multicloud/charts/multicloud-ocata/resources/config/log/log.yml b/kubernetes/multicloud/charts/multicloud-ocata/resources/config/log/log.yml deleted file mode 100644 index 378970af4b..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/resources/config/log/log.yml +++ /dev/null @@ -1,47 +0,0 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -version: 1 -disable_existing_loggers: False - -loggers: - ocata: - handlers: [ocata_handler] - level: "DEBUG" - propagate: False - newton_base: - handlers: [ocata_handler] - level: "DEBUG" - propagate: False - common: - handlers: [ocata_handler] - level: "DEBUG" - propagate: False - -handlers: - ocata_handler: - level: "DEBUG" - class: "logging.handlers.RotatingFileHandler" - filename: "/var/log/onap/multicloud/openstack/ocata/ocata.log" - formatter: "mdcFormat" - maxBytes: 1024*1024*50 - backupCount: 10 - -formatters: - standard: - format: "%(asctime)s|||||%(name)s||%(thread)||%(funcName)s||%(levelname)s||%(message)s" - mdcFormat: - format: "%(asctime)s|||||%(name)s||%(thread)s||%(funcName)s||%(levelname)s||%(message)s||||%(mdc)s \t" - mdcfmt: "{requestID} {invocationID} {serviceName} {serviceIP}" - datefmt: "%Y-%m-%d %H:%M:%S" - (): onaplogging.mdcformatter.MDCFormatter diff --git a/kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt b/kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt deleted file mode 100644 index befedf4578..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt +++ /dev/null @@ -1,34 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - - -1. Get the application URL by running these commands: -{{- if .Values.ingress.enabled }} -{{- range .Values.ingress.hosts }} - http://{{ . }} -{{- end }} -{{- else if contains "NodePort" .Values.service.type }} - export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) - export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") - echo http://$NODE_IP:$NODE_PORT -{{- else if contains "LoadBalancer" .Values.service.type }} - NOTE: It may take a few minutes for the LoadBalancer IP to be available. - You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' - export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') - echo http://$SERVICE_IP:{{ .Values.service.externalPort }} -{{- else if contains "ClusterIP" .Values.service.type }} - export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") - echo "Visit http://127.0.0.1:8080 to use your application" - kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} -{{- end }} diff --git a/kubernetes/multicloud/charts/multicloud-ocata/templates/configmap.yaml b/kubernetes/multicloud/charts/multicloud-ocata/templates/configmap.yaml deleted file mode 100644 index 7dd8fa5bd0..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/templates/configmap.yaml +++ /dev/null @@ -1,29 +0,0 @@ -{{/* -# Copyright © 2017 Amdocs, Bell Canada -# # Modifications Copyright © 2018 AT&T -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} - -apiVersion: v1 -kind: ConfigMap -metadata: - name: {{ include "common.fullname" . }}-log-configmap - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ .Release.Name }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }} diff --git a/kubernetes/multicloud/charts/multicloud-ocata/templates/deployment.yaml b/kubernetes/multicloud/charts/multicloud-ocata/templates/deployment.yaml deleted file mode 100644 index c2d966a599..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/templates/deployment.yaml +++ /dev/null @@ -1,111 +0,0 @@ -{{/* -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -*/}} - -apiVersion: extensions/v1beta1 -kind: Deployment -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ .Release.Name }} - heritage: {{ .Release.Service }} -spec: - replicas: {{ .Values.replicaCount }} - selector: - matchLabels: - app: {{ include "common.name" . }} - template: - metadata: - labels: - app: {{ include "common.name" . }} - release: {{ .Release.Name }} - name: {{ include "common.name" . }} - annotations: - sidecar.istio.io/inject: "{{.Values.istioSidecar}}" - spec: - containers: - - env: - - name: MSB_ADDR - value: "{{ .Values.config.msbgateway }}.{{ include "common.namespace" . }}" - - name: MSB_PORT - value: "{{ .Values.config.msbPort }}" - - name: AAI_ADDR - value: aai.{{ include "common.namespace" . }} - - name: AAI_PORT - value: "{{ .Values.config.aai.port }}" - - name: AAI_SCHEMA_VERSION - value: "{{ .Values.config.aai.schemaVersion }}" - - name: AAI_USERNAME - value: "{{ .Values.config.aai.username }}" - - name: AAI_PASSWORD - value: "{{ .Values.config.aai.password }}" - name: {{ include "common.name" . }} - volumeMounts: - - mountPath: /var/log/onap - name: ocata-log - - mountPath: /opt/ocata/ocata/pub/config/log.yml - name: ocata-logconfig - subPath: log.yml - resources: -{{ include "common.resources" . | indent 12 }} - image: "{{ include "common.repository" . }}/{{ .Values.image }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - ports: - - containerPort: {{ .Values.service.internalPort }} - # disable liveness probe when breakpoints set in debugger - # so K8s doesn't restart unresponsive container - {{ if .Values.liveness.enabled }} - livenessProbe: - httpGet: - path: /api/multicloud-ocata/v0/swagger.json - port: {{ .Values.service.internalPort }} - scheme: HTTP - initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} - periodSeconds: {{ .Values.liveness.periodSeconds }} - timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} - successThreshold: {{ .Values.liveness.successThreshold }} - failureThreshold: {{ .Values.liveness.failureThreshold }} - {{ end }} - # side car containers - - image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - name: filebeat-onap - volumeMounts: - - mountPath: /usr/share/filebeat/filebeat.yml - name: filebeat-conf - subPath: filebeat.yml - - mountPath: /var/log/onap - name: ocata-log - - mountPath: /usr/share/filebeat/data - name: ocata-data-filebeat - - volumes: - - name: ocata-log - emptyDir: {} - - name: ocata-data-filebeat - emptyDir: {} - - name: filebeat-conf - configMap: - name: multicloud-filebeat-configmap - - name: ocata-logconfig - configMap: - name: {{ include "common.fullname" . }}-log-configmap - imagePullSecrets: - - name: "{{ include "common.namespace" . }}-docker-registry-key" - restartPolicy: Always diff --git a/kubernetes/multicloud/charts/multicloud-ocata/templates/service.yaml b/kubernetes/multicloud/charts/multicloud-ocata/templates/service.yaml deleted file mode 100644 index fda5ecefc8..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/templates/service.yaml +++ /dev/null @@ -1,61 +0,0 @@ -{{/* -# Copyright © 2017 Amdocs, Bell Canada -# # Modifications Copyright © 2018 AT&T -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} - -apiVersion: v1 -kind: Service -metadata: - name: {{ include "common.servicename" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ .Release.Name }} - heritage: {{ .Release.Service }} - annotations: - msb.onap.org/service-info: '[ - { - "serviceName": "multicloud-ocata", - "version": "v0", - "url": "/api/multicloud-ocata/v0", - "protocol": "REST", - "port": "{{ .Values.service.externalPort }}", - "visualRange": "1" - }, - { - "serviceName": "multicloud-ocata", - "version": "v1", - "url": "/api/multicloud-ocata/v1", - "protocol": "REST", - "port": "{{ .Values.service.externalPort }}", - "visualRange": "1" - } - ]' -spec: - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.portName }} - {{- else -}} - - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.portName }} - {{- end}} - selector: - app: {{ include "common.name" . }} - release: {{ .Release.Name }} - type: {{ .Values.service.type }} diff --git a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml deleted file mode 100644 index d1d3a38d3a..0000000000 --- a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml +++ /dev/null @@ -1,88 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -################################################################# -# Global configuration defaults. -################################################################# -global: - nodePortPrefix: 302 - -################################################################# -# Application configuration defaults. -################################################################# -# application image -repository: nexus3.onap.org:10001 -image: onap/multicloud/openstack-ocata:1.3.4 -pullPolicy: Always - -#Istio sidecar injection policy -istioSidecar: true - -# application configuration -config: - msbgateway: msb-iag - msbPort: 80 - aai: - port: 8443 - schemaVersion: v13 - username: AAI - password: AAI - -# default number of instances -replicaCount: 1 - -nodeSelector: {} - -affinity: {} - -# probe configuration parameters -liveness: - initialDelaySeconds: 30 - periodSeconds: 10 - timeoutSeconds: 10 - successThreshold: 1 - failureThreshold: 5 - enabled: true - -service: - type: ClusterIP - name: multicloud-ocata - portName: multicloud-ocata - externalPort: 9006 - internalPort: 9006 - nodePort: 93 - -ingress: - enabled: false - -# Resource Limit flavor -By Default using small -flavor: small -# Segregation for Different environment (Small and Large) -resources: - small: - limits: - cpu: 1 - memory: 4Gi - requests: - cpu: 10m - memory: 1Gi - large: - limits: - cpu: 2 - memory: 8Gi - requests: - cpu: 20m - memory: 2Gi - unlimited: {} diff --git a/kubernetes/multicloud/resources/config/provider-plugin.json b/kubernetes/multicloud/resources/config/provider-plugin.json index 11ab751a7e..c3cac8be7a 100644 --- a/kubernetes/multicloud/resources/config/provider-plugin.json +++ b/kubernetes/multicloud/resources/config/provider-plugin.json @@ -16,14 +16,9 @@ "version": "starlingx", "extra_info_hint": "", "provider_plugin": "multicloud-starlingx" - }, - "ocata": { - "version": "ocata", - "extra_info_hint": "", - "provider_plugin": "multicloud-ocata" } }, - "provider_plugin": "multicloud-ocata" + "provider_plugin": "multicloud-pike" }, "vmware": { "vim_type": "vmware", diff --git a/kubernetes/multicloud/values.yaml b/kubernetes/multicloud/values.yaml index bff78cafc9..00fd8c33ad 100644 --- a/kubernetes/multicloud/values.yaml +++ b/kubernetes/multicloud/values.yaml @@ -20,7 +20,7 @@ global: nodePortPrefix: 302 loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 - artifactImage: onap/multicloud/framework-artifactbroker:1.3.3 + artifactImage: onap/multicloud/framework-artifactbroker:1.4.0 prometheus: enabled: false @@ -29,7 +29,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/multicloud/framework:1.3.3 +image: onap/multicloud/framework:1.4.0 pullPolicy: Always #Istio sidecar injection policy diff --git a/kubernetes/nbi/charts/mariadb/values.yaml b/kubernetes/nbi/charts/mariadb/values.yaml index bd79853650..70fa143b9a 100644 --- a/kubernetes/nbi/charts/mariadb/values.yaml +++ b/kubernetes/nbi/charts/mariadb/values.yaml @@ -61,7 +61,7 @@ readiness: persistence: enabled: true volumeReclaimPolicy: Retain - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: mariadb/data diff --git a/kubernetes/oof/charts/oof-has/values.yaml b/kubernetes/oof/charts/oof-has/values.yaml index e53c3422e9..0a003b68da 100755 --- a/kubernetes/oof/charts/oof-has/values.yaml +++ b/kubernetes/oof/charts/oof-has/values.yaml @@ -25,7 +25,7 @@ global: commonConfigPrefix: onap-oof-has image: readiness: oomk8s/readiness-check:2.0.0 - optf_has: onap/optf-has:1.3.1 + optf_has: onap/optf-has:1.3.2 filebeat: docker.elastic.co/beats/filebeat:5.5.0 pullPolicy: Always diff --git a/kubernetes/oof/values.yaml b/kubernetes/oof/values.yaml index d72b1f0457..a9b2b2a9c5 100644 --- a/kubernetes/oof/values.yaml +++ b/kubernetes/oof/values.yaml @@ -26,7 +26,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/optf-osdf:1.3.2 +image: onap/optf-osdf:1.3.4 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/policy/charts/drools/charts/nexus/values.yaml b/kubernetes/policy/charts/drools/charts/nexus/values.yaml index 5d85f6c5b0..2f80892ab2 100644 --- a/kubernetes/policy/charts/drools/charts/nexus/values.yaml +++ b/kubernetes/policy/charts/drools/charts/nexus/values.yaml @@ -73,7 +73,7 @@ ingress: persistence: enabled: true volumeReclaimPolicy: Retain - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: nexus/data diff --git a/kubernetes/policy/charts/mariadb/values.yaml b/kubernetes/policy/charts/mariadb/values.yaml index 15c75b753c..9b7102dbeb 100644 --- a/kubernetes/policy/charts/mariadb/values.yaml +++ b/kubernetes/policy/charts/mariadb/values.yaml @@ -60,7 +60,7 @@ readiness: persistence: enabled: true volumeReclaimPolicy: Retain - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: mariadb/data diff --git a/kubernetes/policy/charts/policy-xacml-pdp/resources/config/config.json b/kubernetes/policy/charts/policy-xacml-pdp/resources/config/config.json index 5635c05efa..4483a1b51a 100644 --- a/kubernetes/policy/charts/policy-xacml-pdp/resources/config/config.json +++ b/kubernetes/policy/charts/policy-xacml-pdp/resources/config/config.json @@ -25,6 +25,14 @@ "https": true, "aaf": false }, + "policyApiParameters": { + "host": "policy-api", + "port": 6969, + "userName": "healthcheck", + "password": "zb!XztG34", + "https": true, + "aaf": false + }, "applicationPath": "/opt/app/policy/pdpx/apps", "topicParameterGroup": { "topicSources" : [{ diff --git a/kubernetes/portal/charts/portal-cassandra/values.yaml b/kubernetes/portal/charts/portal-cassandra/values.yaml index c46ca4238c..e08f59b971 100644 --- a/kubernetes/portal/charts/portal-cassandra/values.yaml +++ b/kubernetes/portal/charts/portal-cassandra/values.yaml @@ -69,7 +69,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: portal/cassandra/data diff --git a/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh b/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh index f00bf8b71d..28fcee1551 100644 --- a/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh +++ b/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh @@ -4,18 +4,18 @@ shopt -s nullglob # if command starts with an option, prepend mysqld if [ "${1:0:1}" = '-' ]; then - set -- mysqld "$@" + set -- mysqld "$@" fi # skip setup if they want an option that stops mysqld wantHelp= for arg; do - case "$arg" in - -'?'|--help|--print-defaults|-V|--version) - wantHelp=1 - break - ;; - esac + case "$arg" in + -'?'|--help|--print-defaults|-V|--version) + wantHelp=1 + break + ;; + esac done # usage: file_env VAR [DEFAULT] @@ -23,168 +23,174 @@ done # (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of # "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature) file_env() { - local var="$1" - local fileVar="${var}_FILE" - local def="${2:-}" - if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then - echo >&2 "error: both $var and $fileVar are set (but are exclusive)" - exit 1 - fi - local val="$def" - if [ "${!var:-}" ]; then - val="${!var}" - elif [ "${!fileVar:-}" ]; then - val="$(< "${!fileVar}")" - fi - export "$var"="$val" - unset "$fileVar" + local var="$1" + local fileVar="${var}_FILE" + local def="${2:-}" + if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then + echo >&2 "error: both $var and $fileVar are set (but are exclusive)" + exit 1 + fi + local val="$def" + if [ "${!var:-}" ]; then + val="${!var}" + elif [ "${!fileVar:-}" ]; then + val="$(< "${!fileVar}")" + fi + export "$var"="$val" + unset "$fileVar" } _check_config() { - toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" ) - if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then - cat >&2 <<-EOM - - ERROR: mysqld failed while attempting to check config - command was: "${toRun[*]}" - - $errors - EOM - exit 1 - fi + toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" ) + if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then + cat >&2 <<-EOM + ERROR: mysqld failed while attempting to check config + command was: "${toRun[*]}" + $errors + EOM + exit 1 + fi } # Fetch value from server config # We use mysqld --verbose --help instead of my_print_defaults because the # latter only show values present in config files, and not server defaults _get_config() { - local conf="$1"; shift - "$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null | awk '$1 == "'"$conf"'" { print $2; exit }' + local conf="$1"; shift + "$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \ + | awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }' + # match "datadir /some/path with/spaces in/it here" but not "--xyz=abc\n datadir (xyz)" } # allow the container to be started with `--user` if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then - _check_config "$@" - DATADIR="$(_get_config 'datadir' "$@")" - mkdir -p "$DATADIR" - find "$DATADIR" \! -user mysql -exec chown mysql '{}' + - exec gosu mysql "$BASH_SOURCE" "$@" + _check_config "$@" + DATADIR="$(_get_config 'datadir' "$@")" + mkdir -p "$DATADIR" + find "$DATADIR" \! -user mysql -exec chown mysql '{}' + + exec gosu mysql "$BASH_SOURCE" "$@" fi if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then - # still need to check config, container may have started with --user - _check_config "$@" - # Get config - DATADIR="$(_get_config 'datadir' "$@")" - - if [ ! -d "$DATADIR/mysql" ]; then - file_env 'MYSQL_ROOT_PASSWORD' - if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then - echo >&2 'error: database is uninitialized and password option is not specified ' - echo >&2 ' You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD' - exit 1 - fi - - mkdir -p "$DATADIR" - - echo 'Initializing database' - # "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here) - mysql_install_db --datadir="$DATADIR" --rpm "${@:2}" - echo 'Database initialized' - - SOCKET="$(_get_config 'socket' "$@")" - "$@" --skip-networking --socket="${SOCKET}" & - pid="$!" - - mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" ) - - for i in {60..0}; do - if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then - break - fi - echo 'MySQL init process in progress...' - sleep 1 - done - if [ "$i" = 0 ]; then - echo >&2 'MySQL init process failed.' - exit 1 - fi - - if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then - # sed is for https://bugs.mysql.com/bug.php?id=20545 - mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql - fi - - if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then - export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)" - echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD" - fi - - rootCreate= - # default root to listen for connections from anywhere - file_env 'MYSQL_ROOT_HOST' '%' - if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then - # no, we don't care if read finds a terminating character in this heredoc - # https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151 - read -r -d '' rootCreate <<-EOSQL || true - CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ; - GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ; - EOSQL - fi - - "${mysql[@]}" <<-EOSQL - -- What's done in this file shouldn't be replicated - -- or products like mysql-fabric won't work - SET @@SESSION.SQL_LOG_BIN=0; - - DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ; - SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ; - GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ; - ${rootCreate} - DROP DATABASE IF EXISTS test ; - FLUSH PRIVILEGES ; - EOSQL - - if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then - mysql+=( -p"${MYSQL_ROOT_PASSWORD}" ) - fi - - file_env 'MYSQL_DATABASE' - if [ "$MYSQL_DATABASE" ]; then - echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}" - mysql+=( "$MYSQL_DATABASE" ) - fi - - file_env 'MYSQL_USER' - file_env 'MYSQL_PASSWORD' - if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then - echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}" - - if [ "$MYSQL_DATABASE" ]; then - echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}" - fi - fi - - echo - for f in /docker-entrypoint-initdb.d/*; do - case "$f" in - *.sh) echo "$0: running $f"; . "$f" ;; - *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; - *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; - *) echo "$0: ignoring $f" ;; - esac - echo - done - - if ! kill -s TERM "$pid" || ! wait "$pid"; then - echo >&2 'MySQL init process failed.' - exit 1 - fi - - echo - echo 'MySQL init process done. Ready for start up.' - echo - fi + # still need to check config, container may have started with --user + _check_config "$@" + # Get config + DATADIR="$(_get_config 'datadir' "$@")" + + if [ ! -d "$DATADIR/mysql" ]; then + file_env 'MYSQL_ROOT_PASSWORD' + if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + echo >&2 'error: database is uninitialized and password option is not specified ' + echo >&2 ' You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD' + exit 1 + fi + + mkdir -p "$DATADIR" + + echo 'Initializing database' + installArgs=( --datadir="$DATADIR" --rpm ) + if { mysql_install_db --help || :; } | grep -q -- '--auth-root-authentication-method'; then + # beginning in 10.4.3, install_db uses "socket" which only allows system user root to connect, switch back to "normal" to allow mysql root without a password + # see https://github.com/MariaDB/server/commit/b9f3f06857ac6f9105dc65caae19782f09b47fb3 + # (this flag doesn't exist in 10.0 and below) + installArgs+=( --auth-root-authentication-method=normal ) + fi + # "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here) + mysql_install_db "${installArgs[@]}" "${@:2}" + echo 'Database initialized' + + SOCKET="$(_get_config 'socket' "$@")" + "$@" --skip-networking --socket="${SOCKET}" & + pid="$!" + + mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" ) + + for i in {60..0}; do + if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then + break + fi + echo 'MySQL init process in progress...' + sleep 1 + done + if [ "$i" = 0 ]; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then + # sed is for https://bugs.mysql.com/bug.php?id=20545 + mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql + fi + + if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)" + echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD" + fi + + rootCreate= + # default root to listen for connections from anywhere + file_env 'MYSQL_ROOT_HOST' '%' + if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then + # no, we don't care if read finds a terminating character in this heredoc + # https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151 + read -r -d '' rootCreate <<-EOSQL || true + CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ; + GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ; + EOSQL + fi + + "${mysql[@]}" <<-EOSQL + -- What's done in this file shouldn't be replicated + -- or products like mysql-fabric won't work + SET @@SESSION.SQL_LOG_BIN=0; + DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ; + SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ; + GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ; + ${rootCreate} + DROP DATABASE IF EXISTS test ; + FLUSH PRIVILEGES ; + EOSQL + + if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then + mysql+=( -p"${MYSQL_ROOT_PASSWORD}" ) + fi + + file_env 'MYSQL_DATABASE' + if [ "$MYSQL_DATABASE" ]; then + echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}" + mysql+=( "$MYSQL_DATABASE" ) + fi + + file_env 'MYSQL_USER' + file_env 'MYSQL_PASSWORD' + if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then + echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}" + + if [ "$MYSQL_DATABASE" ]; then + echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}" + fi + fi + + echo + for f in /docker-entrypoint-initdb.d/*; do + case "$f" in + *.sh) echo "$0: running $f"; . "$f" ;; + *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; + *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; + *) echo "$0: ignoring $f" ;; + esac + echo + done + + if ! kill -s TERM "$pid" || ! wait "$pid"; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + echo + echo 'MySQL init process done. Ready for start up.' + echo + fi fi exec "$@"
\ No newline at end of file diff --git a/kubernetes/portal/charts/portal-mariadb/values.yaml b/kubernetes/portal/charts/portal-mariadb/values.yaml index e00f0fcebb..8869b94467 100644 --- a/kubernetes/portal/charts/portal-mariadb/values.yaml +++ b/kubernetes/portal/charts/portal-mariadb/values.yaml @@ -111,7 +111,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: portal/mariadb/data diff --git a/kubernetes/sdc/charts/sdc-be/values.yaml b/kubernetes/sdc/charts/sdc-be/values.yaml index b20288072b..928252d334 100644 --- a/kubernetes/sdc/charts/sdc-be/values.yaml +++ b/kubernetes/sdc/charts/sdc-be/values.yaml @@ -36,7 +36,7 @@ pullPolicy: Always debugEnabled: false config: - javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=4000,server=y,suspend=n -Xmx1536m -Xms1536m" + javaOptions: "-Xmx1536m -Xms1536m" cassandraSslEnabled: "false" # default number of instances diff --git a/kubernetes/sdc/charts/sdc-cs/values.yaml b/kubernetes/sdc/charts/sdc-cs/values.yaml index 49e5ac05f6..fdad3fe16a 100644 --- a/kubernetes/sdc/charts/sdc-cs/values.yaml +++ b/kubernetes/sdc/charts/sdc-cs/values.yaml @@ -85,7 +85,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: /sdc/sdc-cs/CS diff --git a/kubernetes/sdc/charts/sdc-es/values.yaml b/kubernetes/sdc/charts/sdc-es/values.yaml index 4c0a6cc768..31386333fb 100644 --- a/kubernetes/sdc/charts/sdc-es/values.yaml +++ b/kubernetes/sdc/charts/sdc-es/values.yaml @@ -89,7 +89,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: /sdc/sdc-es/ES diff --git a/kubernetes/sdc/charts/sdc-fe/values.yaml b/kubernetes/sdc/charts/sdc-fe/values.yaml index fba4c568f0..d3ea244368 100644 --- a/kubernetes/sdc/charts/sdc-fe/values.yaml +++ b/kubernetes/sdc/charts/sdc-fe/values.yaml @@ -32,7 +32,7 @@ image: onap/sdc-frontend:1.5.1 pullPolicy: Always config: - javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=6000,server=y,suspend=n -Xmx256m -Xms256m" + javaOptions: "-Xmx256m -Xms256m" plugins: dcae_discovery_url: "http://sdc-dcae-fe:8183/dcaed/#/home" dcae_source_url: "http://sdc.dcae.plugin.simpledemo.onap.org:30263/dcaed/#/home" diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml b/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml index 32b8cdb18d..fac4dd0502 100644 --- a/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml +++ b/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml @@ -36,7 +36,7 @@ pullPolicy: Always debugEnabled: false config: - javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=4001,server=y,suspend=n -Xmx1g -Xms1g" + javaOptions: "-Xmx1g -Xms1g" cassandraSslEnabled: "false" # default number of instances @@ -85,7 +85,7 @@ persistence: ## GKE, AWS & OpenStack) ## # storageClass: "-" - accessMode: ReadWriteMany + accessMode: ReadWriteOnce size: 2Gi mountPath: /dockerdata-nfs mountSubPath: /sdc/sdc-cs/CS diff --git a/kubernetes/sdc/charts/sdc-wfd-be/values.yaml b/kubernetes/sdc/charts/sdc-wfd-be/values.yaml index 73eea4af7e..691963733f 100644 --- a/kubernetes/sdc/charts/sdc-wfd-be/values.yaml +++ b/kubernetes/sdc/charts/sdc-wfd-be/values.yaml @@ -39,7 +39,7 @@ initJob: enabled: true config: - javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=7001,server=y,suspend=n -Xmx1536m -Xms1536m" + javaOptions: "-Xmx1536m -Xms1536m" cassandraAuthenticationEnabled: true cassandraThriftClientPort: 9160 cassandraClientPort: 9042 diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/values.yaml b/kubernetes/sdc/charts/sdc-wfd-fe/values.yaml index 639c811b08..09fe3291e0 100644 --- a/kubernetes/sdc/charts/sdc-wfd-fe/values.yaml +++ b/kubernetes/sdc/charts/sdc-wfd-fe/values.yaml @@ -35,7 +35,7 @@ pullPolicy: Always debugEnabled: false config: - javaOptions: "-Xdebug -agentlib:jdwp=transport=dt_socket,address=7000,server=y,suspend=n -Xmx256m -Xms256m" + javaOptions: "-Xmx256m -Xms256m" backendServerURL: "http://sdc-wfd-be:8080" isHttpsEnabled: true diff --git a/kubernetes/so/charts/so-bpmn-infra/resources/config/overrides/override.yaml b/kubernetes/so/charts/so-bpmn-infra/resources/config/overrides/override.yaml index 74e44012f3..d1f23e9a10 100755 --- a/kubernetes/so/charts/so-bpmn-infra/resources/config/overrides/override.yaml +++ b/kubernetes/so/charts/so-bpmn-infra/resources/config/overrides/override.yaml @@ -93,7 +93,7 @@ mso: endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}:8087/services/rest/v1/vnfs volume-groups: rest: - endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}g:8087/services/rest/v1/volume-groups + endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}:8087/services/rest/v1/volume-groups vnf-async: endpoint: http://so-openstack-adapter.{{ include "common.namespace" . }}:8087/services/VnfAsync vfc: diff --git a/kubernetes/so/charts/so-bpmn-infra/values.yaml b/kubernetes/so/charts/so-bpmn-infra/values.yaml index beda24033f..d004b12aa3 100755 --- a/kubernetes/so/charts/so-bpmn-infra/values.yaml +++ b/kubernetes/so/charts/so-bpmn-infra/values.yaml @@ -27,7 +27,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/bpmn-infra:1.5.0 +image: onap/so/bpmn-infra:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-catalog-db-adapter/values.yaml b/kubernetes/so/charts/so-catalog-db-adapter/values.yaml index ecfeec2312..863d0318db 100755 --- a/kubernetes/so/charts/so-catalog-db-adapter/values.yaml +++ b/kubernetes/so/charts/so-catalog-db-adapter/values.yaml @@ -27,7 +27,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/catalog-db-adapter:1.5.0 +image: onap/so/catalog-db-adapter:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-monitoring/values.yaml b/kubernetes/so/charts/so-monitoring/values.yaml index 494c38c6d5..f0b273c01c 100644 --- a/kubernetes/so/charts/so-monitoring/values.yaml +++ b/kubernetes/so/charts/so-monitoring/values.yaml @@ -32,7 +32,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/so-monitoring:1.5.0 +image: onap/so/so-monitoring:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-openstack-adapter/values.yaml b/kubernetes/so/charts/so-openstack-adapter/values.yaml index 965a306626..792fab90fc 100755 --- a/kubernetes/so/charts/so-openstack-adapter/values.yaml +++ b/kubernetes/so/charts/so-openstack-adapter/values.yaml @@ -26,7 +26,7 @@ global: ################################################################# # Application configuration defaults. ################################################################# -image: onap/so/openstack-adapter:1.5.0 +image: onap/so/openstack-adapter:1.5.1 pullPolicy: Always repository: nexus3.onap.org:10001 diff --git a/kubernetes/so/charts/so-request-db-adapter/values.yaml b/kubernetes/so/charts/so-request-db-adapter/values.yaml index 5c0329e509..b440a0af8f 100755 --- a/kubernetes/so/charts/so-request-db-adapter/values.yaml +++ b/kubernetes/so/charts/so-request-db-adapter/values.yaml @@ -27,7 +27,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/request-db-adapter:1.5.0 +image: onap/so/request-db-adapter:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-sdc-controller/values.yaml b/kubernetes/so/charts/so-sdc-controller/values.yaml index 2354edfea8..a6be6c5734 100755 --- a/kubernetes/so/charts/so-sdc-controller/values.yaml +++ b/kubernetes/so/charts/so-sdc-controller/values.yaml @@ -27,7 +27,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/sdc-controller:1.5.0 +image: onap/so/sdc-controller:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-sdnc-adapter/values.yaml b/kubernetes/so/charts/so-sdnc-adapter/values.yaml index 0969452424..c0ae22324f 100755 --- a/kubernetes/so/charts/so-sdnc-adapter/values.yaml +++ b/kubernetes/so/charts/so-sdnc-adapter/values.yaml @@ -27,7 +27,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/sdnc-adapter:1.5.0 +image: onap/so/sdnc-adapter:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-vfc-adapter/values.yaml b/kubernetes/so/charts/so-vfc-adapter/values.yaml index e69ceecc16..4bf6051a9f 100755 --- a/kubernetes/so/charts/so-vfc-adapter/values.yaml +++ b/kubernetes/so/charts/so-vfc-adapter/values.yaml @@ -27,7 +27,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/vfc-adapter:1.5.0 +image: onap/so/vfc-adapter:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/charts/so-vnfm-adapter/values.yaml b/kubernetes/so/charts/so-vnfm-adapter/values.yaml index a7051c5132..445154f717 100755 --- a/kubernetes/so/charts/so-vnfm-adapter/values.yaml +++ b/kubernetes/so/charts/so-vnfm-adapter/values.yaml @@ -26,7 +26,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/vnfm-adapter:1.5.0 +image: onap/so/vnfm-adapter:1.5.1 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/so/values.yaml b/kubernetes/so/values.yaml index 862f7a61c8..9750efe265 100755 --- a/kubernetes/so/values.yaml +++ b/kubernetes/so/values.yaml @@ -43,7 +43,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/api-handler-infra:1.5.0 +image: onap/so/api-handler-infra:1.5.1 pullPolicy: Always replicaCount: 1 |