diff options
Diffstat (limited to 'kubernetes')
8 files changed, 178 insertions, 84 deletions
diff --git a/kubernetes/common/common/templates/_repository.tpl b/kubernetes/common/common/templates/_repository.tpl index 364ba7dc4c..272db42125 100644 --- a/kubernetes/common/common/templates/_repository.tpl +++ b/kubernetes/common/common/templates/_repository.tpl @@ -41,6 +41,7 @@ */}} {{- define "common.repository.secret" -}} {{- $repo := include "common.repository" . }} + {{- $repo := default "nexus3.onap.org:10001" $repo }} {{- $cred := .Values.global.repositoryCred }} {{- $mail := default "@" $cred.mail }} {{- $auth := printf "%s:%s" $cred.user $cred.password | b64enc }} diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties index 4015e941a6..9d1febe27d 100755 --- a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties +++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties @@ -1,17 +1,24 @@ -# Copyright © 2017 Amdocs, Bell Canada, AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################### +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= # -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +############################################################################### ############################################################################### ## ## Cambria API Server config @@ -19,7 +26,7 @@ ## - Default values are shown as commented settings. ## -############################################################################## +############################################################################### ## ## HTTP service ## @@ -29,7 +36,9 @@ ## ## Both Cambria and Kafka make use of Zookeeper. ## +#config.zk.servers=172.18.1.1 config.zk.servers={{.Values.zookeeper.name}}:{{.Values.zookeeper.port}} +#config.zk.root=/fe3c/cambria/config ############################################################################### @@ -39,17 +48,22 @@ config.zk.servers={{.Values.zookeeper.name}}:{{.Values.zookeeper.port}} ## Items below are passed through to Kafka's producer and consumer ## configurations (after removing "kafka.") ## if you want to change request.required.acks it can take this one value +#kafka.metadata.broker.list=localhost:9092,localhost:9093 kafka.metadata.broker.list={{.Values.kafka.name}}:{{.Values.kafka.port}} ##kafka.request.required.acks=-1 #kafka.client.zookeeper=${config.zk.servers} consumer.timeout.ms=100 zookeeper.connection.timeout.ms=6000 -zookeeper.session.timeout.ms=6000 +zookeeper.session.timeout.ms=20000 zookeeper.sync.time.ms=2000 auto.commit.interval.ms=1000 fetch.message.max.bytes =1000000 auto.commit.enable=false +#(backoff*retries > zksessiontimeout) +kafka.rebalance.backoff.ms=10000 +kafka.rebalance.max.retries=6 + ############################################################################### ## @@ -86,7 +100,7 @@ authentication.adminSecret=fe3cCompound ## which would substantially impact a high volume consumer's performance. ## ## This complicates Cambria server failover, because we often need server -## A to close its connection before server B brings up the replacement. +## A to close its connection before server B brings up the replacement. ## ## The consumer cache is normally enabled. @@ -96,8 +110,8 @@ authentication.adminSecret=fe3cCompound ## consumers every sweepFreqSeconds and will clean up any connections that are ## dormant for touchFreqMs. #cambria.consumer.cache.sweepFreqSeconds=15 -#cambria.consumer.cache.touchFreqMs=120000 - +cambria.consumer.cache.touchFreqMs=120000 +##stickforallconsumerrequests=false ## The cache is managed through ZK. The default value for the ZK connection ## string is the same as config.zk.servers. #cambria.consumer.cache.zkConnect=${config.zk.servers} @@ -110,6 +124,9 @@ authentication.adminSecret=fe3cCompound ## #cambria.api.node.identifier=<use-something-unique-to-this-instance> +#cambria.rateLimit.maxEmptyPollsPerMinute=30 +#cambria.rateLimitActual.delay.ms=10 + ############################################################################### ## ## Metrics Reporting @@ -117,7 +134,7 @@ authentication.adminSecret=fe3cCompound ## This server can report its metrics periodically on a topic. ## #metrics.send.cambria.enabled=true -#metrics.send.cambria.topic=cambria.apinode.metrics #msgrtr.apinode.metrics.dmaap +#metrics.send.cambria.topic=cambria.apinode.metrics #msgrtr.apinode.metrics.dmaap #metrics.send.cambria.sendEverySeconds=60 cambria.consumer.cache.zkBasePath=/fe3c/cambria/consumerCache @@ -129,18 +146,23 @@ maxcontentlength=10000 ############################################################################## #AAF Properties -msgRtr.namespace.aaf=org.openecomp.dcae.dmaap.mtnje2.mr.topic -msgRtr.topicfactory.aaf=org.openecomp.dcae.dmaap.topicFactory|:org.openecomp.dcae.dmaap.mtnje2.mr.topic: -enforced.topic.name.AAF=org.openecomp +msgRtr.namespace.aaf=org.onap.dmaap.mr.topic +msgRtr.topicfactory.aaf=org.onap.dmaap.mr.topicFactory|:org.onap.dmaap.mr.topic: +enforced.topic.name.AAF=org.onap forceAAF=false transidUEBtopicreqd=false -defaultNSforUEB=org.openecomp.dmaap.mr.ueb +defaultNSforUEB=org.onap.dmaap.mr ############################################################################## #Mirror Maker Agent -msgRtr.mirrormakeradmin.aaf=org.openecomp.dmaap.mr.dev.mirrormaker|*|admin -msgRtr.mirrormakeruser.aaf=org.openecomp.dmaap.mr.dev.mirrormaker|*|user -msgRtr.mirrormakeruser.aaf.create=org.openecomp.dmaap.mr.dev.topicFactory|:org.openecomp.dmaap.mr.dev.topic: +msgRtr.mirrormakeradmin.aaf=com.onap.dmaap.mr.dev.mirrormaker|*|admin +msgRtr.mirrormakeruser.aaf=com.onap.dmaap.mr.dev.mirrormaker|*|user +msgRtr.mirrormakeruser.aaf.create=com.onap.dmaap.mr.dev.topicFactory|:com.onap.dmaap.mr.dev.topic: msgRtr.mirrormaker.timeout=15000 -msgRtr.mirrormaker.topic=org.openecomp.dmaap.mr.prod.mm.agent +msgRtr.mirrormaker.topic=com.onap.dmaap.mr.prod.mm.agent msgRtr.mirrormaker.consumergroup=mmagentserver msgRtr.mirrormaker.consumerid=1 + +kafka.max.poll.interval.ms=300000 +kafka.heartbeat.interval.ms=60000 +kafka.session.timeout.ms=240000 +kafka.max.poll.records=1000
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties index 9079794517..a79bb8d40a 100755 --- a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties +++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties @@ -1,35 +1,20 @@ -# Copyright © 2017 Amdocs, Bell Canada, AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. +aaf_locate_url=https://aaf-onap-test.osaaf.org:8095 +aaf_url=https://AAF_LOCATE_URL/AAF_NS.service:2.1 +aaf_env=DEV +aaf_lur=org.onap.aaf.cadi.aaf.v2_0.AAFLurPerm -basic_realm=openecomp.org -basic_warn=TRUE +cadi_truststore=/appl/dmaapMR1/etc/truststoreONAPall.jks +cadi_truststore_password=changeit -cadi_loglevel=DEBUG -#cadi_keyfile=target/swm/package/nix/dist_files/appl/${artifactId}/etc/keyfile2 -cadi_keyfile=/appl/dmaapMR1/etc/keyfile -# Configure AAF -aaf_url=https://DME2RESOLVE/service=org.openecomp.authz.AuthorizationService/version=2.0/envContext=DEV/routeOffer=BAU_SE +cadi_keyfile=/appl/dmaapMR1/etc/keyfilenew -aaf_id=dgl@openecomp.org -aaf_password=enc:f2u5br1mh29M02- -aaf_timeout=5000 -aaf_clean_interval=1200000 -aaf_user_expires=60000 -aaf_high_count=1000000 +cadi_alias=dmaapmr@mr.dmaap.onap.org +cadi_keystore=/appl/dmaapMR1/etc/org.onap.dmaap.mr.p12 +cadi_keystore_password=Messaging for All +cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US -# The following properties are being set by the AJSC Container and should NOT need to be set here. -AFT_LATITUDE=33.823589 -AFT_LONGITUDE=-84.366982 -AFT_ENVIRONMENT=AFTUAT +cadi_loglevel=INFO +cadi_protocols=TLSv1.1,TLSv1.2 +cadi_latitude=37.78187 +cadi_longitude=-122.26147
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/message-router/templates/deployment.yaml b/kubernetes/dmaap/charts/message-router/templates/deployment.yaml index 1798092eb4..4e12ded493 100644 --- a/kubernetes/dmaap/charts/message-router/templates/deployment.yaml +++ b/kubernetes/dmaap/charts/message-router/templates/deployment.yaml @@ -66,6 +66,9 @@ spec: port: {{ .Values.service.externalPort }} initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: enableCadi + value: "false" volumeMounts: - mountPath: /etc/localtime name: localtime diff --git a/kubernetes/dmaap/charts/message-router/values.yaml b/kubernetes/dmaap/charts/message-router/values.yaml index aef8862e7f..9ba34884da 100644 --- a/kubernetes/dmaap/charts/message-router/values.yaml +++ b/kubernetes/dmaap/charts/message-router/values.yaml @@ -53,14 +53,14 @@ affinity: {} # probe configuration parameters liveness: - initialDelaySeconds: 10 + initialDelaySeconds: 120 periodSeconds: 10 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true readiness: - initialDelaySeconds: 10 + initialDelaySeconds: 120 periodSeconds: 10 service: diff --git a/kubernetes/helm/plugins/deploy/deploy.sh b/kubernetes/helm/plugins/deploy/deploy.sh index 07455d7db4..9d9d1d208c 100755 --- a/kubernetes/helm/plugins/deploy/deploy.sh +++ b/kubernetes/helm/plugins/deploy/deploy.sh @@ -38,6 +38,7 @@ Flags: --set stringArray set values on the command line (can specify multiple or separate values with commas: key1=val1,key2=val2) --set-string stringArray set STRING values on the command line (can specify multiple or separate values with commas: key1=val1,key2=val2) -f, --values valueFiles specify values in a YAML file or a URL(can specify multiple) (default []) + --verbose enables full helm install/upgrade output during deploy EOF } @@ -66,18 +67,45 @@ generate_overrides() { if [[ $START == "global:" ]]; then echo "global:" > $GLOBAL_OVERRIDES cat $COMPUTED_OVERRIDES | sed '/common:/,/consul:/d' \ - | sed -n '/'"$START"'/,/'log:'/p' | sed '1d;$d' >> $GLOBAL_OVERRIDES + | sed -n '/'"$START"'/,/'log:'/p' | sed '1d;$d' >> $GLOBAL_OVERRIDES else SUBCHART_DIR="$CACHE_SUBCHART_DIR/$(cut -d':' -f1 <<<"$START")" if [[ -d "$SUBCHART_DIR" ]]; then - cat $COMPUTED_OVERRIDES | sed -n '/'"$START"'/,/'"$END"'/p' \ + cat $COMPUTED_OVERRIDES | sed -n '/^'"$START"'/,/^'"$END"'/p' \ | sed '1d;$d' | cut -c3- > $SUBCHART_DIR/subchart-overrides.yaml fi fi done } +resolve_deploy_flags() { + DEPLOY_FLAGS=$1 + for flag in -f --values --set --set-string + do + while true ; do + # extract value of flag + length=${#flag} + length=$((length+1)) + FLAG_VALUE="$(echo $DEPLOY_FLAGS | sed -n 's/.*\('$flag'\).\s*/\1/p' | cut -c$length- | cut -d' ' -f1)" + + # purge flag and value from + DEPLOY_FLAGS="${DEPLOY_FLAGS//$flag $FLAG_VALUE/}" + DEPLOY_FLAGS=$(echo $DEPLOY_FLAGS | awk '{$1=$1};1') + if [ -z "$FLAG_VALUE" ] ; then + break + fi + done + done + echo "$DEPLOY_FLAGS" +} + deploy() { + # validate params + if [[ -z "$1" || -z "$2" ]]; then + usage + exit 0 + fi + RELEASE=$1 CHART_URL=$2 FLAGS=${@:3} @@ -86,23 +114,54 @@ deploy() { CACHE_DIR=~/.helm/plugins/deploy/cache CHART_DIR=$CACHE_DIR/$CHART_NAME CACHE_SUBCHART_DIR=$CHART_DIR-subcharts + LOG_DIR=$CHART_DIR/logs + + # determine if verbose output is enabled + VERBOSE="false" + if [[ $FLAGS = *"--verbose"* ]]; then + FLAGS="$(echo $FLAGS| sed -n 's/--verbose//p')" + VERBOSE="true" + fi + if [[ $FLAGS = *"--dry-run"* ]]; then + VERBOSE="true" + FLAGS="$FLAGS --debug" + fi + # should pass all flags instead - NAMESPACE="$(echo $FLAGS | sed -n 's/.*\(namespace\).\s*/\1/p' | cut -c10-)" - + NAMESPACE="$(echo $FLAGS | sed -n 's/.*\(namespace\).\s*/\1/p' | cut -c10- | cut -d' ' -f1)" + + # Remove all override values passed in as arguments. These will be used during dry run + # to resolve computed override values. Remaining flags will be passed on during + # actual upgrade/install of parent and subcharts. + DEPLOY_FLAGS=$(resolve_deploy_flags "$FLAGS") + + # determine if upgrading individual subchart or entire parent + subcharts + SUBCHART_RELEASE="$(cut -d'-' -f2 <<<"$RELEASE")" + if [[ ! -d "$CACHE_SUBCHART_DIR/$SUBCHART_RELEASE" ]]; then + SUBCHART_RELEASE= + else + # update specified subchart without parent + RELEASE="$(cut -d'-' -f1 <<<"$RELEASE")" + fi + # clear previously cached charts rm -rf $CACHE_DIR + # create log driectory + mkdir -p $LOG_DIR + # fetch umbrella chart (parent chart containing subcharts) if [[ -d "$CHART_URL" ]]; then mkdir -p $CHART_DIR cp -R $CHART_URL/* $CHART_DIR/ - cd $CHART_DIR/charts/ - for subchart in * ; do - tar xzf ${subchart} + charts=$CHART_DIR/charts/* + for subchart in $charts ; do + tar xzf ${subchart} -C $CHART_DIR/charts/ done - rm -rf *.tgz + rm -rf $CHART_DIR/charts/*.tgz else + echo "fetching $CHART_URL" helm fetch $CHART_URL --untar --untardir $CACHE_DIR fi @@ -126,29 +185,57 @@ deploy() { generate_overrides $COMPUTED_OVERRIDES $GLOBAL_OVERRIDES # upgrade/install parent chart first - helm upgrade -i $RELEASE $CHART_DIR --namespace $NAMESPACE -f $COMPUTED_OVERRIDES + if [[ -z "$SUBCHART_RELEASE" ]]; then + LOG_FILE=$LOG_DIR/${RELEASE}.log + :> $LOG_FILE + + helm upgrade -i $RELEASE $CHART_DIR $DEPLOY_FLAGS -f $COMPUTED_OVERRIDES \ + > $LOG_FILE.log 2>&1 + + if [[ $VERBOSE == "true" ]]; then + cat $LOG_FILE + else + echo "release $RELEASE deployed" + fi + fi # parse computed overrides - will use to determine if a subchart is "enabled" eval $(parse_yaml $COMPUTED_OVERRIDES "computed_") # upgrade/install each "enabled" subchart - cd $CACHE_SUBCHART_DIR + cd $CACHE_SUBCHART_DIR/ for subchart in * ; do VAR="computed_${subchart}_enabled" COMMAND="$"$VAR eval "SUBCHART_ENABLED=$COMMAND" if [[ $SUBCHART_ENABLED == "true" ]]; then - SUBCHART_OVERRIDES=$CACHE_SUBCHART_DIR/$subchart/subchart-overrides.yaml - helm upgrade -i "${RELEASE}-${subchart}" $CACHE_SUBCHART_DIR/$subchart \ - --namespace $NAMESPACE -f $GLOBAL_OVERRIDES -f $SUBCHART_OVERRIDES + if [[ -z "$SUBCHART_RELEASE" || $SUBCHART_RELEASE == "$subchart" ]]; then + LOG_FILE=$LOG_DIR/"${RELEASE}-${subchart}".log + :> $LOG_FILE + + SUBCHART_OVERRIDES=$CACHE_SUBCHART_DIR/$subchart/subchart-overrides.yaml + helm upgrade -i "${RELEASE}-${subchart}" $CACHE_SUBCHART_DIR/$subchart \ + $DEPLOY_FLAGS -f $GLOBAL_OVERRIDES -f $SUBCHART_OVERRIDES \ + > $LOG_FILE 2>&1 + + if [[ $VERBOSE == "true" ]]; then + cat $LOG_FILE + else + echo "release ${RELEASE}-${subchart} deployed" + fi + fi + else + array=($(helm ls -q | grep "${RELEASE}-${subchart}")) + n=${#array[*]} + for (( i = n-1; i >= 0; i-- )); do + helm del "${array[i]}" --purge + done fi done -} -if [[ $# < 2 ]]; then - usage - exit 0 -fi + # report on success/failures of installs/upgrades + helm ls | grep FAILED | grep $RELEASE +} case "${1:-"help"}" in "help") diff --git a/kubernetes/helm/plugins/undeploy/undeploy.sh b/kubernetes/helm/plugins/undeploy/undeploy.sh index 02b5d34c65..8191174314 100755 --- a/kubernetes/helm/plugins/undeploy/undeploy.sh +++ b/kubernetes/helm/plugins/undeploy/undeploy.sh @@ -21,7 +21,7 @@ undeploy() { RELEASE=$1 FLAGS=$2 - array=($(helm ls -q | grep $RELEASE)) + array=($(helm ls -q --all | grep $RELEASE)) n=${#array[*]} for (( i = n-1; i >= 0; i-- )) do diff --git a/kubernetes/onap/values.yaml b/kubernetes/onap/values.yaml index 545a7bd73e..190a9ec67d 100644 --- a/kubernetes/onap/values.yaml +++ b/kubernetes/onap/values.yaml @@ -47,15 +47,11 @@ global: persistence: mountPath: /dockerdata-nfs - # flag to enable debugging - application support required - debugEnabled: false - # override default resource limit flavor for all charts flavor: unlimited -# Repository for creation of nexus3.onap.org secret -repository: nexus3.onap.org:10001 - + # flag to enable debugging - application support required + debugEnabled: false ################################################################# # Enable/disable and configure helm charts (ie. applications) |