diff options
Diffstat (limited to 'kubernetes')
25 files changed, 336 insertions, 355 deletions
diff --git a/kubernetes/Makefile b/kubernetes/Makefile index 3f41c3cc4b..7150f10c1f 100644 --- a/kubernetes/Makefile +++ b/kubernetes/Makefile @@ -20,6 +20,12 @@ OUTPUT_DIR := $(ROOT_DIR)/dist PACKAGE_DIR := $(OUTPUT_DIR)/packages SECRET_DIR := $(OUTPUT_DIR)/secrets +ifneq ($(SKIP_LINT),TRUE) + HELM_LINT_CMD := helm lint +else + HELM_LINT_CMD := echo "Skipping linting of" +endif + SUBMODS := robot aai EXCLUDES := config oneclick readiness test dist helm $(PARENT_CHART) dcae $(SUBMODS) HELM_CHARTS := $(filter-out $(EXCLUDES), $(patsubst %/.,%,$(wildcard */.))) $(PARENT_CHART) @@ -55,7 +61,7 @@ dep-%: make-% @if [ -f $*/requirements.yaml ]; then helm dep up $*; fi lint-%: dep-% - @if [ -f $*/Chart.yaml ]; then helm lint $*; fi + @if [ -f $*/Chart.yaml ]; then $(HELM_LINT_CMD) $*; fi package-%: lint-% @mkdir -p $(PACKAGE_DIR) diff --git a/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml b/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml index 26affe600c..e4deab0e15 100644 --- a/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml +++ b/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml @@ -1,4 +1,5 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +--- +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -30,30 +31,24 @@ # The default name is elasticsearch, but you should change it to an appropriate name which describes the # purpose of the cluster. # -cluster.name: "clamp-dashboard" -# -# The port that other nodes in the cluster should use when communicating with this node. -# Required for Elasticsearch's nodes running on different cluster nodes. -# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html -#transport.publish_port:$transport.publish_port -# -# The host address to publish for nodes in the cluster to connect to. -# Required for Elasticsearch's nodes running on different cluster nodes. -# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html -#transport.publish_host:$transport.publish_host +## Default Elasticsearch configuration from elasticsearch-docker. +## from https://opendistro.github.io/for-elasticsearch-docs/docs/elasticsearch/configuration/ # -# ------------------------------------ Node ------------------------------------ -# -# It is better to provide different meaningfull names fot different elastic nodes. -# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id. -# Note that the node id is persisted and does not change when a node restarts + +cluster.name: "clamp-dashboard" +node.name: "cldash-es-node1" +# ---------------------------------- Network ----------------------------------- # -#node.name: $node.name +# Set the bind address to a specific IP (IPv4 or IPv6): +# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a +# non-loopback address. +network.host: 0.0.0.0 # -# Add custom attributes to the node: +# Set a custom port for HTTP: If required, default is 9200-9300 # -#node.attr.rack: r1 +#http.port: $http.port # +# For more information, consult the network module documentation. # ----------------------------------- Paths ------------------------------------ # # The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma. @@ -78,19 +73,6 @@ bootstrap.memory_lock: false # # Elasticsearch performs poorly when the system is swapping the memory. # -# ---------------------------------- Network ----------------------------------- -# -# Set the bind address to a specific IP (IPv4 or IPv6): -# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a -# non-loopback address. -network.host: 0.0.0.0 -# -# Set a custom port for HTTP: If required, default is 9200-9300 -# -#http.port: $http.port -# -# For more information, consult the network module documentation. -# # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when new node is started @@ -98,24 +80,16 @@ network.host: 0.0.0.0 # that are likely to be live and contactable. # By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try # to connect to other nodes running on the same server. -# -#$discovery.zen.ping.unicast.hosts -# -# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes -# available. Only then will an election take place. -# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1): +# # minimum_master_nodes need to be explicitly set when bound on a public IP +# # set to 1 to allow single node clusters +# # Details: https://github.com/elastic/elasticsearch/pull/17288 discovery.zen.minimum_master_nodes: 1 -# -# For more information, consult the zen discovery module documentation. -# -# ---------------------------------- Gateway ----------------------------------- -# -# Block initial recovery after a full cluster restart until N nodes are started: -# -#gateway.recover_after_nodes: 3 -# -# For more information, consult the gateway module documentation. -# +discovery.seed_hosts: [] +# # Breaking change in 7.0 +# # https://www.elastic.co/guide/en/elasticsearch/reference/7.0/breaking-changes-7.0.html#breaking_70_discovery_changes +cluster.initial_master_nodes: + - cldash-es-node1 +# - docker-test-node-1 # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: @@ -129,26 +103,26 @@ http.port: {{.Values.service.externalPort}} # Defaults to 9300-9400. # More info: transport.tcp.port: {{.Values.service.externalPort2}} -#xpack.graph.enabled: false -#Set to false to disable X-Pack graph features. -#xpack.ml.enabled: false -#Set to false to disable X-Pack machine learning features. -#xpack.monitoring.enabled: false -#Set to false to disable X-Pack monitoring features. +######## Start OpenDistro for Elasticsearch Security Demo Configuration ######## +# WARNING: revise all the lines below before you go into production +opendistro_security.ssl.transport.pemcert_filepath: esnode.pem +opendistro_security.ssl.transport.pemkey_filepath: esnode-key.pem +opendistro_security.ssl.transport.pemtrustedcas_filepath: root-ca.pem +opendistro_security.ssl.transport.enforce_hostname_verification: false +opendistro_security.ssl.http.enabled: {{.Values.security.ssl.enabled}} +opendistro_security.ssl.http.pemcert_filepath: esnode.pem +opendistro_security.ssl.http.pemkey_filepath: esnode-key.pem +opendistro_security.ssl.http.pemtrustedcas_filepath: root-ca.pem +opendistro_security.allow_unsafe_democertificates: true +opendistro_security.allow_default_init_securityindex: true +opendistro_security.authcz.admin_dn: + - CN=kirk,OU=client,O=client,L=test, C=de -#xpack.watcher.enabled: false -#Set to false to disable Watcher. - -#xpack.license.self_generated.type: basic -#xpack.security.enabled: false - -## Search Guard -# -searchguard.enterprise_modules_enabled: false -searchguard.ssl.transport.keystore_filepath: sg/node-0-keystore.jks -searchguard.ssl.transport.truststore_filepath: sg/truststore.jks -searchguard.ssl.transport.enforce_hostname_verification: false - -searchguard.authcz.admin_dn: - - "CN=kirk,OU=client,O=client,l=tEst,C=De" +opendistro_security.audit.type: internal_elasticsearch +opendistro_security.enable_snapshot_restore_privilege: true +opendistro_security.check_snapshot_restore_write_privileges: true +opendistro_security.restapi.roles_enabled: ["all_access", "security_rest_api_access"] +cluster.routing.allocation.disk.threshold_enabled: false +node.max_local_storage_nodes: 3 +######## End OpenDistro for Elasticsearch Security Demo Configuration ########
\ No newline at end of file diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml index 8060a35b43..58ff107568 100644 --- a/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml +++ b/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml @@ -73,12 +73,14 @@ spec: port: {{ .Values.service.internalPort }} initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} periodSeconds: {{ .Values.liveness.periodSeconds }} + timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} {{ end -}} readinessProbe: tcpSocket: port: {{ .Values.service.internalPort2 }} initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} + timeoutSeconds: {{ .Values.readiness.timeoutSeconds }} env: volumeMounts: - mountPath: /etc/localtime diff --git a/kubernetes/clamp/charts/clamp-dash-es/values.yaml b/kubernetes/clamp/charts/clamp-dash-es/values.yaml index 2d67048844..ae7abd5ec4 100644 --- a/kubernetes/clamp/charts/clamp-dash-es/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-es/values.yaml @@ -1,4 +1,4 @@ -# Copyright © 2017 Amdocs, Bell Canada +# Copyright © 2020 Amdocs, Bell Canada # Modifications Copyright © 2018 AT&T # # Licensed under the Apache License, Version 2.0 (the "License"); @@ -32,7 +32,7 @@ busyboxImage: library/busybox:latest # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-elasticsearch:4.1.1 +image: onap/clamp-dashboard-elasticsearch:5.0.2 pullPolicy: Always # flag to enable debugging - application support required @@ -51,15 +51,17 @@ affinity: {} # probe configuration parameters liveness: - initialDelaySeconds: 10 - periodSeconds: 10 + initialDelaySeconds: 180 + periodSeconds: 30 + timeoutSeconds: 5 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true readiness: - initialDelaySeconds: 10 - periodSeconds: 10 + initialDelaySeconds: 180 + periodSeconds: 30 + timeoutSeconds: 5 ## Persist data to a persitent volume persistence: @@ -83,6 +85,10 @@ persistence: mountSubPath: clamp/dashboard-elasticsearch/data mountSubPathLogs: clamp +security: + ssl: + enabled: true + service: type: ClusterIP name: cdash-es diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.crt.pem b/kubernetes/clamp/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.crt.pem deleted file mode 100644 index ce630d4354..0000000000 --- a/kubernetes/clamp/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.crt.pem +++ /dev/null @@ -1,30 +0,0 @@ -Bag Attributes - friendlyName: clamp@clamp.onap.org - localKeyID: 54 69 6D 65 20 31 35 35 33 37 38 37 35 31 38 33 30 33 -subject=/CN=clamp/emailAddress=/OU=clamp@clamp.onap.org/OU=OSAAF/O=ONAP/C=US -issuer=/C=US/O=ONAP/OU=OSAAF/CN=intermediateCA_9 ------BEGIN CERTIFICATE----- -MIIEKDCCAxCgAwIBAgIIWY+5kgf/UG4wDQYJKoZIhvcNAQELBQAwRzELMAkGA1UE -BhMCVVMxDTALBgNVBAoMBE9OQVAxDjAMBgNVBAsMBU9TQUFGMRkwFwYDVQQDDBBp -bnRlcm1lZGlhdGVDQV85MB4XDTE5MDMyMTE2MTY1OFoXDTIwMDMyMTE2MTY1OFow -bDEOMAwGA1UEAwwFY2xhbXAxDzANBgkqhkiG9w0BCQEWADEdMBsGA1UECwwUY2xh -bXBAY2xhbXAub25hcC5vcmcxDjAMBgNVBAsMBU9TQUFGMQ0wCwYDVQQKDARPTkFQ -MQswCQYDVQQGEwJVUzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALic -uDccBjOAlOsL1Z1nKnDPRTNxBwIVfARRQDxK3C0zDHQ5qEmIQlF0Vjp+bJ2rgzMW -BnodC38zt1jSXymEsekZNV2sUyBbzJl6vxvA1xJKI9VHLyPSzyUEd1H4qh8b7IDX -3GDqUJgNfvzJ94DaNnnYWFVZq/IYdLjCFaXDxPUQZtlmpdkIWBzvMeNRe4bWajau -immkmSi5/2BYQfZXHXpiKiyBnN+1FbU3consmjNwS1L+PjD+k3JLsc5ANZYZMOTp -Szhu3xmDiB3UV4gPQWacQQZEo/5exywY3Ax3TowGwIA660eSkW1L5RPdyvzEgp7A -vu4+rbhfeR5bXjy2iAUCAwEAAaOB8jCB7zAJBgNVHRMEAjAAMA4GA1UdDwEB/wQE -AwIF4DAgBgNVHSUBAf8EFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVAYDVR0jBE0w -S4AUgfeZWxC5yIze81Je6k5poEM+rN2hMKQuMCwxDjAMBgNVBAsMBU9TQUFGMQ0w -CwYDVQQKDARPTkFQMQswCQYDVQQGEwJVU4IBBzAdBgNVHQ4EFgQU+GZ6wmWDPrmq -Wd1/NtMYiCQ8Dg4wOwYDVR0RBDQwMoIFY2xhbXCCHWNsYW1wLmFwaS5zaW1wbGVk -ZW1vLm9uYXAub3JnggpjbGFtcC5vbmFwMA0GCSqGSIb3DQEBCwUAA4IBAQCFZdhB -U6xm6l0vj4q89onLx4opTPvwGNRc0n402lifkPYXseFtphZSHIf2Sg0mFTH4KHb4 -FdMyBzq1+f5WLU+xRC1nT4eGJ0FvRR6204/fGVrzJTS67phnRnxr2WZzLPW0wPJe -K8SzN6tkUgE7/a/s0T/htE/blDxWh75+tA2jQlgj1Ri0y9A1J8wx++REKjGlHjFN -53aiipsB+wC/oEMzYL4qEPiYPI0Lr3Lsay1F7f6cvDT4+EYzBLMFuwCvpcnHgSMS -4fFj2ROmUG2+CC23B88Q0WNxjLPq/CrmHZZBsqwruPJ0cSuCQxfshTQ6uZhcjtu8 -6TRYkIcL0x9r/AHP ------END CERTIFICATE----- diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.key.pem b/kubernetes/clamp/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.key.pem deleted file mode 100644 index fcf68bfa23..0000000000 --- a/kubernetes/clamp/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.key.pem +++ /dev/null @@ -1,32 +0,0 @@ -Bag Attributes - friendlyName: clamp@clamp.onap.org - localKeyID: 54 69 6D 65 20 31 35 35 33 37 38 37 35 31 38 33 30 33 -Key Attributes: <No Attributes> ------BEGIN PRIVATE KEY----- -MIIEvwIBADANBgkqhkiG9w0BAQEFAASCBKkwggSlAgEAAoIBAQC4nLg3HAYzgJTr -C9WdZypwz0UzcQcCFXwEUUA8StwtMwx0OahJiEJRdFY6fmydq4MzFgZ6HQt/M7dY -0l8phLHpGTVdrFMgW8yZer8bwNcSSiPVRy8j0s8lBHdR+KofG+yA19xg6lCYDX78 -yfeA2jZ52FhVWavyGHS4whWlw8T1EGbZZqXZCFgc7zHjUXuG1mo2ropppJkouf9g -WEH2Vx16YiosgZzftRW1N3KJ7JozcEtS/j4w/pNyS7HOQDWWGTDk6Us4bt8Zg4gd -1FeID0FmnEEGRKP+XscsGNwMd06MBsCAOutHkpFtS+UT3cr8xIKewL7uPq24X3ke -W148togFAgMBAAECggEATncV+R5pKFS7dteV2IvzxvTh1cZxkxoslu0t3zJ2OKPc -5D1pYK+QeGx5Be2cHru6TOlMoXRc4ZjKke8AUXY74/Y573GB91vtL0KznYkuIHDw -oALcb153eqVWTbniHMzSjcSxv2N4E9iQo8L39oVI6CrjCIvPgFuSqMCdUNJPkVTI -4nsarTfLK4fzi7IbWzi9JdE1QRNIxcCMcYJRnLZMdneMLBleR0UL82Xc2KOy5SEt -zyKYCQ8zS247FKolnOrDkhKxXI5fzdDpRK5AQSsAykUPWlYq7pzKjY/dU9rMRohx -YSltFjPZ3sQ3UKqqIqhZS+GoVuZoc925WyhViPsqtQKBgQDsL4LFfPWN8nnsusQp -VR3T7HvvwXuEVAydlaJMwZU0cRYN+L7RHHjDoXZZrNJDIDzNoWnBLKRGx3mtLmgJ -9Pa6SxN6Oc8oo6jzv2D59g1PVjNOMOYTCTb/2Xum4LMLaeeF57HkWxzeA3Ws47++ -gXwzQpbE90tp1Ys4uXD3JoivvwKBgQDIGZTwLGhLSegdAjG83WEgmdtzT1kjvx0Q -A8IR2jkgkTJHdKiuslJ8Z3/XufHEwWMWwfs1XLwxYluoo1y9eNvNeHZXjLqjL62c -I3034F9IvvTUqFcxam2WdoklXbAiSvLUo/9exPgOuVxok6Zv1imRgGb/vYV9vyG7 -86MRuQu5OwKBgQC9E3fcA6JMpY3H3uhEsngzfMDm+fyYvfRvfyezzNFWbyWZv8V6 -gBGJg0vMlFarGDa044BW/hbw9qXI5zqwpeOS1aFdGsRlo0cRAuduk/Spy7c85FZ7 -bMgT4BZmTMHo5DpNb2NxDSO59AkThCuvJde47ZjnS5WavzI6EfKGWNnZ3wKBgQCF -QiwjCp/mS/DtqLFxAsmVSYGROG231aXILYiIFRloa+ndFn7j4NP4D4FfLHErRFL2 -K/ddIUYfaU57b1fqwts26ht90LXWyYDH9AaHOMCcFLe+C+INgcA7rPNG1C7hl6JC -JHmEJo7AV4eICZSU9D44rRdrB08oYCpaHjYiLmb1UwKBgQCWCDJ4p2DrNL9hzj3K -kzvM5saXrfI4aVBXVt9rw9s1d/WG8JOpnmHcnLPb6Tj59rDktrLCLv0sVstMwNVJ -sOO+qsgn1VoZalcVhhjdONm5YvhJQgz0F7Y2xkr6g/AuMPz2YigGfm7fe/z7rc+L -q9Ua2HmUS8DDBy7W89MNZJNkDQ== ------END PRIVATE KEY----- diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml b/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml index 55df82b0f1..db81e3da00 100644 --- a/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml +++ b/kubernetes/clamp/charts/clamp-dash-kibana/resources/config/kibana.yml @@ -1,4 +1,4 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -10,126 +10,26 @@ # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and -# limitations under the License. -#xpack.graph.enabled: false -#Set to false to disable X-Pack graph features. -#xpack.ml.enabled: false -#Set to false to disable X-Pack machine learning features. -#xpack.monitoring.enabled: false -#Set to false to disable X-Pack monitoring features. -#xpack.reporting.enabled: false -#Set to false to disable X-Pack reporting features. -#xpack.security.enabled: false -#Set to false to disable X-Pack security features. -#xpack.watcher.enabled: false -#Set to false to disable Watcher. +# limitations under the License.# Default Kibana configuration from kibana-docker. + +server.name: "Clamp CL Dashboard" +server.host: "0" # Kibana is served by a back end server. This setting specifies the port to use. server.port: {{.Values.service.externalPort}} -# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values. -# The default is 'localhost', which usually means remote machines will not be able to connect. -# To allow connections from remote users, set this parameter to a non-loopback address. -server.host: "0.0.0.0" - -# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects -# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests -# to Kibana. This setting cannot end in a slash. -#server.basePath: "" - -# The maximum payload size in bytes for incoming server requests. -#server.maxPayloadBytes: 1048576 - -# The Kibana server's name. This is used for display purposes. -server.name: "Clamp Dashboard" - -# The URL of the Elasticsearch instance to use for all your queries. -elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}" -# When this setting's value is true Kibana uses the hostname specified in the server.host -# setting. When the value of this setting is false, Kibana uses the hostname of the host -# that connects to this Kibana instance. -#elasticsearch.preserveHost: true - -# Kibana uses an index in Elasticsearch to store saved searches, visualizations and -# dashboards. Kibana creates a new index if the index doesn't already exist. -#kibana.index: ".kibana" - -# The default application to load. -#kibana.defaultAppId: "discover" - -# If your Elasticsearch is protected with basic authentication, these settings provide -# the username and password that the Kibana server uses to perform maintenance on the Kibana -# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which -# is proxied through the Kibana server. -#elasticsearch.username: "elastic" -#elasticsearch.password: "changeme" -# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively. -# These settings enable SSL for outgoing requests from the Kibana server to the browser. server.ssl.enabled: {{.Values.config.sslEnabled}} server.ssl.certificate: {{.Values.config.sslPemCertFilePath}} server.ssl.key: {{.Values.config.sslPemkeyFilePath}} -# Optional settings that provide the paths to the PEM-format SSL certificate and key files. -# These files validate that your Elasticsearch backend uses the same key files. -#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate -#elasticsearch.ssl.key: $elasticsearch_ssl_key - -# Optional setting that enables you to specify a path to the PEM file for the certificate -# authority for your Elasticsearch instance. -#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities - -# To disregard the validity of SSL certificates, change this setting's value to 'none'. -#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode - -# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of -# the elasticsearch.requestTimeout setting. -#elasticsearch.pingTimeout: 1500 - -# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value -# must be a positive integer. -#elasticsearch.requestTimeout: 30000 - -# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side -# headers, set this value to [] (an empty list). -#elasticsearch.requestHeadersWhitelist: [ authorization ] - -# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten -# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration. -#elasticsearch.customHeaders: {} - -# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable. -#elasticsearch.shardTimeout: 0 - -# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying. -#elasticsearch.startupTimeout: 5000 - -# Specifies the path where Kibana creates the process ID file. -#pid.file: /var/run/kibana.pid - -# Enables you specify a file where Kibana stores log output. -#logging.dest: stdout - -# Set the value of this setting to true to suppress all logging output. -#logging.silent: false - -# Set the value of this setting to true to suppress all logging output other than error messages. -#logging.quiet: false - -# Set the value of this setting to true to log all events, including system usage information -# and all requests. -#logging.verbose: false - -# Set the interval in milliseconds to sample system and process performance -# metrics. Minimum is 100ms. Defaults to 5000. -#ops.interval: 5000 - -# The default locale. This locale can be used in certain circumstances to substitute any missing -# translations. -#i18n.defaultLocale: "en" +# The URL of the Elasticsearch instance to use for all your queries. +elasticsearch.hosts: ${elasticsearch_base_url} -## Search Guard -# -#xpack.security.enabled: false +elasticsearch.ssl.verificationMode: none elasticsearch.username: {{.Values.config.elasticUSR}} elasticsearch.password: {{.Values.config.elasticPWD}} -searchguard.cookie.password: 123567818187654rwrwfsfshdhdhtegdhfzftdhncn +elasticsearch.requestHeadersWhitelist: ["securitytenant","Authorization"] + +opendistro_security.multitenancy.enabled: true +opendistro_security.multitenancy.tenants.preferred: ["Private", "Global"] +opendistro_security.readonly_mode.roles: ["kibana_read_only"]
\ No newline at end of file diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-dash-kibana/templates/deployment.yaml index 2b0adac392..26547b23a9 100644 --- a/kubernetes/clamp/charts/clamp-dash-kibana/templates/deployment.yaml +++ b/kubernetes/clamp/charts/clamp-dash-kibana/templates/deployment.yaml @@ -68,6 +68,8 @@ spec: periodSeconds: {{ .Values.liveness.periodSeconds }} {{ end -}} env: + - name: elasticsearch_base_url + value: "{{ternary "https" "http" .Values.security.ssl.enabled}}://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}" volumeMounts: - mountPath: /etc/localtime name: localtime @@ -75,8 +77,6 @@ spec: - mountPath: /usr/share/kibana/config/kibana.yml name: {{ include "common.fullname" . }} subPath: kibana.yml - - name: {{ include "common.fullname" . }}-aaf-pem-certs - mountPath: /usr/share/kibana/config/keystore/ resources: {{ include "common.resources" . | indent 12 }} {{- if .Values.nodeSelector }} @@ -97,8 +97,5 @@ spec: items: - key: kibana.yml path: kibana.yml - - name: {{ include "common.fullname" . }}-aaf-pem-certs - secret: - secretName: {{ include "common.fullname" . }}-aaf-pem-keys imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml index 88587160e9..be0c40e1e1 100644 --- a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml @@ -34,13 +34,14 @@ busyboxImage: library/busybox:latest # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-kibana:4.1.3 +image: onap/clamp-dashboard-kibana:5.0.2 pullPolicy: Always # flag to enable debugging - application support required debugEnabled: false # application configuration +#the 'sslEnabled flag' here below is for the kibana UI connection (web browser connection to kibana) config: elasticsearchServiceName: cdash-es elasticsearchPort: 9200 @@ -60,14 +61,19 @@ affinity: {} # probe configuration parameters liveness: initialDelaySeconds: 360 - periodSeconds: 10 + periodSeconds: 30 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true readiness: - initialDelaySeconds: 10 - periodSeconds: 10 + initialDelaySeconds: 360 + periodSeconds: 30 + +#internal ssl security scheme for elasticsearch connection mainly +security: + ssl: + enabled: true service: #Example service definition with external, internal and node ports. diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/resources/certs/aafca.pem b/kubernetes/clamp/charts/clamp-dash-logstash/resources/certs/aafca.pem deleted file mode 100644 index cf12ec4c61..0000000000 --- a/kubernetes/clamp/charts/clamp-dash-logstash/resources/certs/aafca.pem +++ /dev/null @@ -1,26 +0,0 @@ ------BEGIN CERTIFICATE----- -MIIEVDCCAjygAwIBAgIBAjANBgkqhkiG9w0BAQsFADAsMQ4wDAYDVQQLDAVPU0FB -RjENMAsGA1UECgwET05BUDELMAkGA1UEBhMCVVMwHhcNMTgwNjA1MDg1MTQxWhcN -MjMwNjA1MDg1MTQxWjBHMQswCQYDVQQGEwJVUzENMAsGA1UECgwET05BUDEOMAwG -A1UECwwFT1NBQUYxGTAXBgNVBAMMEGludGVybWVkaWF0ZUNBXzEwggEiMA0GCSqG -SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDOXCdZIoWM0EnEEw3qPiVMhAgNolWCTaLt -eI2TjlTQdGDIcXdBZukHdNeOKYzOXRsLt6bLRtd5yARpn53EbzS/dgAyHuaz1HjE -5IPWSFRg9SulfHUmcS+GBt1+KiMJTlOsw6wSA73H/PjjXBbWs/uRJTnaNmV3so7W -DhNW6fHOrbom4p+3FucbB/QAM9b/3l/1LKnRgdXx9tekDnaKN5u3HVBmyOlRhaRp -tscLUCT3jijoGAPRcYZybgrpa0z3iCWquibTO/eLwuO/Dn7yHWau9ZZAHGPBSn9f -TiLKRYV55mNjr3zvs8diTPECFPW8w8sRIH3za1aKHgUC1gd87Yr3AgMBAAGjZjBk -MB0GA1UdDgQWBBQa1FdycErTZ6nr4dxiMbKH0P7vqjAfBgNVHSMEGDAWgBRTVTPy -S+vQUbHBeJrBKDF77+rtSTASBgNVHRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQE -AwIBhjANBgkqhkiG9w0BAQsFAAOCAgEAlA/RTPy5i09fJ4ytSAmAdytMwEwRaU9F -dshG7LU9q95ODsuM79yJvV9+ISIJZRsBqf5PDv93bUCKKHIYGvR6kNd+n3yx/fce -txDkC/tMj1T9D8TuDKAclGEO9K5+1roOQQFxr4SE6XKb/wjn8OMrCoJ75S0F3htF -LKL85T77JeGeNgSk8JEsZvQvj32m0gv9rxi5jM/Zi5E2vxrBR9T1v3kVvlt6+PSF -BoHXROk5HQmdHxnH+VYQtDHSwj9Xe9aoJMyL0WjYKd//8NUO+VACDOtK4Nia6gy9 -m/n9kMASMw6f9iF4n6t4902RWrRKTYM1CVu5wyVklVbEdE9i6Db4CpL9E8HpBUAP -t44JiNzuFkDmSE/z5XuQIimDt6nzOaSF8pX2KHY2ICDLwpMNUvxzqXD9ECbdspiy -JC2RGq8uARGGl6kQQBKDNO8SrO7rSBPANd1+LgqrKbCrHYfvFgkZPgT5MlQi+E1G -LNT+i6fzZha9ed/L6yjl5Em71flJGFwRZl2pfErZRxp8pLPcznYyIpSjcwnqNCRC -orhlp8nheiODC3oO3AFHDiFgUqvm8hgpnT2cPk2lpU2VY1TcZ8sW5qUDCxINIPcW -u1SAsa87IJK3vEzPZfTCs/S6XThoqRfXj0c0Rahj7YFRi/PqIPY0ejwdtmZ9m9pZ -8Lb0GYmlo44= ------END CERTIFICATE----- diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/logstash.yml b/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/logstash.yml index 369b5820d5..cecd5b18c8 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/logstash.yml +++ b/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/logstash.yml @@ -1,4 +1,4 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -22,8 +22,3 @@ path.config: /usr/share/logstash/pipeline ## Setting true makes logstash check periodically for change in pipeline configurations config.reload.automatic: true -## xpack configurations -#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"] -#xpack.monitoring.elasticsearch.username: elastic -#xpack.monitoring.elasticsearch.password: changeme -#xpack.monitoring.enabled: false diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf b/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf index 05d8085d43..4b05910c02 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf +++ b/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf @@ -218,6 +218,8 @@ output { if "error" in [tags] { elasticsearch { codec => "json" + cacert => "/clamp-cert/ca-certs.pem" + ssl_certificate_verification => false hosts => ["${elasticsearch_base_url}"] user => ["${logstash_user}"] password => ["${logstash_pwd}"] @@ -229,6 +231,8 @@ output { elasticsearch { codec => "json" hosts => ["${elasticsearch_base_url}"] + cacert => "/clamp-cert/ca-certs.pem" + ssl_certificate_verification => false user => ["${logstash_user}"] password => ["${logstash_pwd}"] document_id => "%{requestID}" @@ -241,6 +245,8 @@ output { elasticsearch { codec => "json" hosts => ["${elasticsearch_base_url}"] + cacert => "/clamp-cert/ca-certs.pem" + ssl_certificate_verification => false user => ["${logstash_user}"] password => ["${logstash_pwd}"] index => "events-%{+YYYY.MM.DD}" # creates daily indexes diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/templates/configmap.yaml b/kubernetes/clamp/charts/clamp-dash-logstash/templates/configmap.yaml index 01ee76b7c1..4278a6e6d3 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/templates/configmap.yaml +++ b/kubernetes/clamp/charts/clamp-dash-logstash/templates/configmap.yaml @@ -25,13 +25,3 @@ metadata: heritage: {{ .Release.Service }} data: {{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} - ---- -apiVersion: v1 -kind: Secret -metadata: - name: {{ include "common.fullname" . }}-aaf-keys - namespace: {{ include "common.namespace" . }} -type: Opaque -data: -{{ tpl (.Files.Glob "resources/certs/*").AsSecrets . | indent 2 }} diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-dash-logstash/templates/deployment.yaml index 697ebb66b6..7c5c047930 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/templates/deployment.yaml +++ b/kubernetes/clamp/charts/clamp-dash-logstash/templates/deployment.yaml @@ -62,13 +62,13 @@ spec: - name: request_topic value: "{{ .Values.config.requestTopic }}" - name: dmaap_base_url - value: {{ .Values.config.dmaapScheme }}://{{ .Values.config.dmaapHost }}.{{ include "common.namespace" . }}:{{ .Values.config.dmaapPort }} + value: {{ ternary "https" "http" .Values.security.ssl.enabled }}://{{ .Values.config.dmaapHost }}.{{ include "common.namespace" . }}:{{ .Values.config.dmaapPort }} - name: logstash_user value: "{{ .Values.config.logstash_user }}" - name: logstash_pwd value: "{{ .Values.config.logstash_pwd }}" - name: elasticsearch_base_url - value: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}" + value: "{{ ternary "https" "http" .Values.security.ssl.enabled }}://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}" ports: - containerPort: {{ .Values.service.internalPort }} name: {{ include "common.servicename" . }} @@ -77,6 +77,7 @@ spec: port: {{ .Values.service.internalPort }} initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} + timeoutSeconds: {{ .Values.readiness.timeoutSeconds }} # disable liveness probe when breakpoints set in debugger # so K8s doesn't restart unresponsive container {{- if eq .Values.liveness.enabled true }} @@ -85,6 +86,7 @@ spec: port: {{ .Values.service.internalPort }} initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} periodSeconds: {{ .Values.liveness.periodSeconds }} + timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} {{ end -}} volumeMounts: - mountPath: /etc/localtime @@ -96,8 +98,6 @@ spec: - mountPath: /usr/share/logstash/pipeline/logstash.conf name: {{ include "common.fullname" . }} subPath: pipeline.conf - - name: {{ include "common.fullname" . }}-aaf-certs - mountPath: /certs.d/ resources: {{ include "common.resources" . | indent 12 }} {{- if .Values.nodeSelector }} @@ -120,9 +120,5 @@ spec: path: logstash.yml - key: pipeline.conf path: pipeline.conf - - name: {{ include "common.fullname" . }}-aaf-certs - secret: - secretName: {{ include "common.fullname" . }}-aaf-keys - imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml b/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml index 20bf974157..9a0321a478 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml @@ -30,7 +30,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-logstash:4.1.3 +image: onap/clamp-dashboard-logstash:5.0.2 pullPolicy: Always # flag to enable debugging - application support required @@ -41,7 +41,8 @@ config: elasticsearchServiceName: cdash-es elasticsearchPort: 9200 dmaapHost: message-router - dmaapScheme: https + dmaapSchemeSSL: https + dmaapSchemeNoSSL: http dmaapPort: 3905 dmaapConsumerGroup: "clampdashboard" dmaapConsumerId: "clampdashboard" @@ -60,15 +61,21 @@ affinity: {} # probe configuration parameters liveness: - initialDelaySeconds: 120 - periodSeconds: 10 + initialDelaySeconds: 900 + periodSeconds: 20 + timeoutSeconds: 5 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true readiness: - initialDelaySeconds: 10 - periodSeconds: 10 + initialDelaySeconds: 900 + periodSeconds: 20 + timeoutSeconds: 5 + +security: + ssl: + enabled: true service: #Example service definition with external, internal and node ports. diff --git a/kubernetes/modeling/charts/modeling-etsicatalog/values.yaml b/kubernetes/modeling/charts/modeling-etsicatalog/values.yaml index 05f73e841c..353f2a7c70 100644 --- a/kubernetes/modeling/charts/modeling-etsicatalog/values.yaml +++ b/kubernetes/modeling/charts/modeling-etsicatalog/values.yaml @@ -24,7 +24,7 @@ global: config: msbServiceName: msb-iag - msbPort: 80 + msbPort: 443 persistence: mountPath: /dockerdata-nfs diff --git a/kubernetes/sdnc/charts/sdnc-ansible-server/resources/config/RestServer_config b/kubernetes/sdnc/charts/sdnc-ansible-server/resources/config/RestServer_config index eb88d7236b..7dc5c19e12 100644 --- a/kubernetes/sdnc/charts/sdnc-ansible-server/resources/config/RestServer_config +++ b/kubernetes/sdnc/charts/sdnc-ansible-server/resources/config/RestServer_config @@ -13,33 +13,33 @@ # limitations under the License. # Host definition -ip: 0.0.0.0 -port: {{.Values.service.internalPort}} +ip: 0.0.0.0 +port: {{.Values.service.internalPort}} # Security (controls use of TLS encrypton and RestServer authentication) -tls: no -auth: no +tls: no +auth: no # TLS certificates (must be built on application host) -priv: provide_privated_key.pem -pub: provide_public_key.pem +priv: provide_privated_key.pem +pub: provide_public_key.pem # RestServer authentication -id: sdnc -psswd: sdnc +id: ${REST_USER} +psswd: ${REST_PASSWORD} # Mysql -host: {{.Values.config.mariadbGalera.serviceName}} -user: sdnc -passwd: sdnc -db: ansible +host: {{ include "common.mariadbService" $ }} +user: ${DB_USER} +passwd: ${DB_PASSWORD} +db: {{ index .Values "mariadb-galera" "config" "mysqlDatabase" }} # Playbooks -from_files: yes -ansible_path: /opt/onap/sdnc/Playbooks -ansible_inv: Ansible_inventory -ansible_temp: PlaybooksTemp -timeout_seconds: 60 +from_files: yes +ansible_path: /opt/onap/sdnc/Playbooks +ansible_inv: Ansible_inventory +ansible_temp: PlaybooksTemp +timeout_seconds: 60 # Blocking on GetResults -getresults_block: yes +getresults_block: yes diff --git a/kubernetes/sdnc/charts/sdnc-ansible-server/templates/deployment.yaml b/kubernetes/sdnc/charts/sdnc-ansible-server/templates/deployment.yaml index 2233099224..d353adaf58 100644 --- a/kubernetes/sdnc/charts/sdnc-ansible-server/templates/deployment.yaml +++ b/kubernetes/sdnc/charts/sdnc-ansible-server/templates/deployment.yaml @@ -32,6 +32,29 @@ spec: spec: initContainers: - command: + - sh + args: + - -c + - "cd /config-input && for PFILE in `ls -1 .`; do envsubst <${PFILE} >/config/${PFILE}; done" + env: + - name: DB_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-secret" "key" "login") | indent 10 }} + - name: DB_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-secret" "key" "password") | indent 10 }} + - name: REST_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "rest-creds" "key" "login") | indent 10 }} + - name: REST_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "rest-creds" "key" "password") | indent 10 }} + volumeMounts: + - mountPath: /config-input + name: config-input + - mountPath: /config + name: config + image: "{{ .Values.global.envsubstImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-update-config + + - command: - /root/ready.py args: - --container-name @@ -89,9 +112,12 @@ spec: - name: localtime hostPath: path: /etc/localtime - - name: config + - name: config-input configMap: name: {{ include "common.fullname" . }} defaultMode: 0644 + - name: config + emptyDir: + medium: Memory imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/sdnc/charts/sdnc-ansible-server/templates/secret.yaml b/kubernetes/sdnc/charts/sdnc-ansible-server/templates/secret.yaml new file mode 100644 index 0000000000..dee311c336 --- /dev/null +++ b/kubernetes/sdnc/charts/sdnc-ansible-server/templates/secret.yaml @@ -0,0 +1,15 @@ +# Copyright © 2020 Samsung Electronics +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +{{ include "common.secret" . }} diff --git a/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml b/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml index db7c63cfa4..b0b3c81c8f 100644 --- a/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml +++ b/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml @@ -21,6 +21,35 @@ global: readinessImage: readiness-check:2.0.2 loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 + # envsusbt + envsubstImage: dibi/envsubst + mariadbGalera: + #This flag allows SO to instantiate its own mariadb-galera cluster + #If shared instance is used, this chart assumes that DB already exists + localCluster: false + service: mariadb-galera + internalPort: 3306 + nameOverride: mariadb-galera + +################################################################# +# Secrets metaconfig +################################################################# +secrets: + - uid: db-secret + name: &dbSecretName '{{ include "common.release" . }}-sdnc-ansible-server-db-secret' + type: basicAuth + # This is a nasty trick that allows you override this secret using external one + # with the same field that is used to pass this to subchart + externalSecret: '{{ ternary "" (tpl (default "" (index .Values "mariadb-galera" "config" "userCredentialsExternalSecret")) .) (hasSuffix "sdnc-ansible-server-db-secret" (index .Values "mariadb-galera" "config" "userCredentialsExternalSecret"))}}' + login: '{{ index .Values "mariadb-galera" "config" "userName" }}' + password: '{{ index .Values "mariadb-galera" "config" "userPassword" }}' + passwordPolicy: required + - uid: rest-creds + type: basicAuth + externalSecret: '{{ .Values.config.restCredsExternalSecret }}' + login: '{{ .Values.config.restUser }}' + password: '{{ .Values.config.restPassword }}' + passwordPolicy: required ################################################################# # Application configuration defaults. @@ -37,9 +66,25 @@ debugEnabled: false config: sdncChartName: sdnc configDir: /opt/onap/sdnc - mariadbGalera: - serviceName: mariadb-galera + restUser: sdnc + restPassword: sdnc + # restCredsExternalSecret: some secret +mariadb-galera: + config: + userCredentialsExternalSecret: *dbSecretName + userName: sdnc + userPassword: sdnc + mysqlDatabase: ansible + nameOverride: ansible-server-galera + service: + name: ansible-server-galera + portName: ansible-server-galera + internalPort: 3306 + replicaCount: 1 + persistence: + enabled: true + mountSubPath: ansible-server/maria/data # default number of instances replicaCount: 1 diff --git a/kubernetes/sdnc/charts/ueb-listener/resources/config/dblib.properties b/kubernetes/sdnc/charts/ueb-listener/resources/config/dblib.properties index fdc2218532..b4e69d36f5 100644 --- a/kubernetes/sdnc/charts/ueb-listener/resources/config/dblib.properties +++ b/kubernetes/sdnc/charts/ueb-listener/resources/config/dblib.properties @@ -2,8 +2,8 @@ # ============LICENSE_START======================================================= # openECOMP : SDN-C # ================================================================================ -# Copyright (C) 2017 AT&T Intellectual Property. All rights -# reserved. +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# Copyright (C) 2020 Samsung Electrinics # ================================================================================ # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -23,11 +23,11 @@ org.onap.ccsdk.sli.dbtype=jdbc org.onap.ccsdk.sli.jdbc.hosts=sdnctldb01 -org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{.Values.config.mariadbGalera.serviceName}}.{{.Release.Namespace}}:{{.Values.config.mariadbGalera.internalPort}}/sdnctl +org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{include "common.mariadbService" $}}:{{include "common.mariadbPort" $}}/{{index $.Values "mariadb-galera" "config" "mysqlDatabase"}} org.onap.ccsdk.sli.jdbc.driver=org.mariadb.jdbc.Driver -org.onap.ccsdk.sli.jdbc.database=sdnctl -org.onap.ccsdk.sli.jdbc.user=sdnctl -org.onap.ccsdk.sli.jdbc.password=gamma +org.onap.ccsdk.sli.jdbc.database={{index $.Values "mariadb-galera" "config" "mysqlDatabase"}} +org.onap.ccsdk.sli.jdbc.user=${SDNC_DB_USER} +org.onap.ccsdk.sli.jdbc.password=${SDNC_DB_PASSWORD} org.onap.ccsdk.sli.jdbc.connection.name=sdnctldb01 org.onap.ccsdk.sli.jdbc.connection.timeout=50 org.onap.ccsdk.sli.jdbc.request.timeout=100 diff --git a/kubernetes/sdnc/charts/ueb-listener/resources/config/ueb-listener.properties b/kubernetes/sdnc/charts/ueb-listener/resources/config/ueb-listener.properties index 86e51317f2..946773b18b 100644 --- a/kubernetes/sdnc/charts/ueb-listener/resources/config/ueb-listener.properties +++ b/kubernetes/sdnc/charts/ueb-listener/resources/config/ueb-listener.properties @@ -2,10 +2,10 @@ org.onap.ccsdk.sli.northbound.uebclient.asdc-address=sdc-be.{{.Release.Namespace org.onap.ccsdk.sli.northbound.uebclient.consumer-group=sdc-OpenSource-Env1-sdnc-dockero org.onap.ccsdk.sli.northbound.uebclient.consumer-id=sdc-COpenSource-Env11-sdnc-dockero org.onap.ccsdk.sli.northbound.uebclient.environment-name=AUTO -org.onap.ccsdk.sli.northbound.uebclient.password=Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U -org.onap.ccsdk.sli.northbound.uebclient.user=sdnc -org.onap.ccsdk.sli.northbound.uebclient.sdnc-user=admin -org.onap.ccsdk.sli.northbound.uebclient.sdnc-passwd={{.Values.config.odlPassword}} +org.onap.ccsdk.sli.northbound.uebclient.password=${UEB_PASSWORD} +org.onap.ccsdk.sli.northbound.uebclient.user=${UEB_USER} +org.onap.ccsdk.sli.northbound.uebclient.sdnc-user=${ODL_USER} +org.onap.ccsdk.sli.northbound.uebclient.sdnc-passwd=${ODL_PASSWORD} org.onap.ccsdk.sli.northbound.uebclient.asdc-api-base-url=http://sdnc.{{.Release.Namespace}}:{{.Values.config.sdncPort}}/restconf/operations/ org.onap.ccsdk.sli.northbound.uebclient.asdc-api-namespace=org:onap:ccsdk org.onap.ccsdk.sli.northbound.uebclient.spool.incoming=/opt/onap/sdnc/ueb-listener/spool/incoming diff --git a/kubernetes/sdnc/charts/ueb-listener/templates/deployment.yaml b/kubernetes/sdnc/charts/ueb-listener/templates/deployment.yaml index 154d36c411..da72e1e558 100644 --- a/kubernetes/sdnc/charts/ueb-listener/templates/deployment.yaml +++ b/kubernetes/sdnc/charts/ueb-listener/templates/deployment.yaml @@ -32,10 +32,36 @@ spec: spec: initContainers: - command: + - sh + args: + - -c + - "cd /config-input && for PFILE in `ls -1 .`; do envsubst <${PFILE} >/config/${PFILE}; done" + env: + - name: SDNC_DB_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-secret" "key" "login") | indent 10 }} + - name: SDNC_DB_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-secret" "key" "password") | indent 10 }} + - name: UEB_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "ueb-creds" "key" "login") | indent 10 }} + - name: UEB_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "ueb-creds" "key" "password") | indent 10 }} + - name: ODL_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "odl-creds" "key" "login") | indent 10 }} + - name: ODL_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "odl-creds" "key" "password") | indent 10 }} + volumeMounts: + - mountPath: /config-input + name: config-input + - mountPath: /config + name: properties + image: "{{ .Values.global.envsubstImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-update-config + - command: - /root/ready.py args: - --container-name - - {{ .Values.config.mariadbGalera.chartName }} + - {{ include "common.mariadbService" . }} - --container-name - {{ .Values.config.sdncChartName }} - --container-name @@ -87,9 +113,12 @@ spec: - name: localtime hostPath: path: /etc/localtime - - name: properties + - name: config-input configMap: name: {{ include "common.fullname" . }} defaultMode: 0644 + - name: properties + emptyDir: + medium: Memory imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/sdnc/charts/ueb-listener/templates/secret.yaml b/kubernetes/sdnc/charts/ueb-listener/templates/secret.yaml new file mode 100644 index 0000000000..dee311c336 --- /dev/null +++ b/kubernetes/sdnc/charts/ueb-listener/templates/secret.yaml @@ -0,0 +1,15 @@ +# Copyright © 2020 Samsung Electronics +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +{{ include "common.secret" . }} diff --git a/kubernetes/sdnc/charts/ueb-listener/values.yaml b/kubernetes/sdnc/charts/ueb-listener/values.yaml index b4b42fdbc5..03fbf52f9b 100644 --- a/kubernetes/sdnc/charts/ueb-listener/values.yaml +++ b/kubernetes/sdnc/charts/ueb-listener/values.yaml @@ -21,6 +21,41 @@ global: readinessImage: readiness-check:2.0.2 loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 + # envsusbt + envsubstImage: dibi/envsubst + mariadbGalera: + #This flag allows SO to instantiate its own mariadb-galera cluster + #If shared instance is used, this chart assumes that DB already exists + localCluster: false + service: mariadb-galera + internalPort: 3306 + nameOverride: mariadb-galera + +################################################################# +# Secrets metaconfig +################################################################# +secrets: + - uid: db-secret + name: '{{ include "common.release" . }}-sdnc-ueb-listener-db-secret' + type: basicAuth + # This is a nasty trick that allows you override this secret using external one + # with the same field that is used to pass this to subchart + externalSecret: '{{ ternary "" (tpl (default "" (index .Values "mariadb-galera" "config" "userCredentialsExternalSecret")) .) (hasSuffix "sdnc-ueb-listener-db-secret" (index .Values "mariadb-galera" "config" "userCredentialsExternalSecret"))}}' + login: '{{ index .Values "mariadb-galera" "config" "userName" }}' + password: '{{ index .Values "mariadb-galera" "config" "userPassword" }}' + passwordPolicy: required + - uid: odl-creds + type: basicAuth + externalSecret: '{{ .Values.config.odlCredsExternalSecret }}' + login: '{{ .Values.config.odlUser }}' + password: '{{ .Values.config.odlPassword }}' + passwordPolicy: required + - uid: ueb-creds + type: basicAuth + externalSecret: '{{ .Values.config.odlCredsExternalSecret }}' + login: '{{ .Values.config.uebUser }}' + password: '{{ .Values.config.uebPassword }}' + passwordPolicy: required ################################################################# # Application configuration defaults. @@ -40,11 +75,30 @@ config: sdcbeChartName: sdc-be msgRouterContainerName: message-router configDir: /opt/onap/sdnc/data/properties + uebUser: sdnc + uebPassword: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U + # uebCredsExternalSecret: some secret + odlUser: admin odlPassword: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U - mariadbGalera: - chartName: mariadb-galera - serviceName: mariadb-galera + # odlCredsExternalSecret: some secret + +mariadb-galera: + # '&mariadbConfig' means we "store" the values for later use in the file + # with '*mariadbConfig' pointer. + config: + userCredentialsExternalSecret: '{{ include "common.release" . }}-sdnc-ueb-listener-db-secret' + userName: sdnctl + userPassword: gamma + mysqlDatabase: sdnctl + nameOverride: ueb-listener-galera + service: + name: ueb-listener-galera + portName: ueb-listener-galera internalPort: 3306 + replicaCount: 1 + persistence: + enabled: true + mountSubPath: ueb-listener/maria/data # default number of instances replicaCount: 1 |