diff options
Diffstat (limited to 'kubernetes')
28 files changed, 318 insertions, 303 deletions
diff --git a/kubernetes/aai b/kubernetes/aai -Subproject a1e0153fcc6ba67737f23fa0b14c95b0ab66d18 +Subproject 6509a172751b3c85995100e3d3a205abe73b116 diff --git a/kubernetes/appc/charts/appc-cdt/values.yaml b/kubernetes/appc/charts/appc-cdt/values.yaml index ba91c19ed5..7db9527a7f 100644 --- a/kubernetes/appc/charts/appc-cdt/values.yaml +++ b/kubernetes/appc/charts/appc-cdt/values.yaml @@ -26,7 +26,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/appc-cdt-image:1.5.1 +image: onap/appc-cdt-image:1.5.3 pullPolicy: Always # application configuration diff --git a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/installFeatures.sh b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/installFeatures.sh deleted file mode 100755 index 724f4e767d..0000000000 --- a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/installFeatures.sh +++ /dev/null @@ -1,184 +0,0 @@ -#!/bin/bash - -### -# ============LICENSE_START======================================================= -# APPC -# ================================================================================ -# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -# ================================================================================ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# ============LICENSE_END========================================================= -# ECOMP is a trademark and service mark of AT&T Intellectual Property. -### - -ODL_HOME=${ODL_HOME:-/opt/opendaylight/current} -APPC_HOME=${APPC_HOME:-/opt/onap/appc} -ENABLE_ODL_CLUSTER=${ENABLE_ODL_CLUSTER:-false} -APPC_FEATURE_DIR=${APPC_FEATURE_DIR:-${APPC_HOME}/features} - -function featureInstall { -COUNT=0 -while [ $COUNT -lt 10 ]; do - ${ODL_HOME}/bin/client feature:install $1 2> /tmp/installErr - cat /tmp/installErr - if grep -q 'Failed to get the session' /tmp/installErr; then - sleep 10 - else - let COUNT=10 - fi - let COUNT=COUNT+1 -done -} - - APPC_FEATURES=" \ - appc-metric \ - appc-dmaap-adapter \ - appc-chef-adapter \ - appc-netconf-adapter \ - appc-rest-adapter \ - appc-lifecycle-management \ - appc-dispatcher \ - appc-provider \ - appc-dg-util \ - appc-dg-shared \ - appc-sdc-listener \ - appc-oam \ - appc-iaas-adapter \ - appc-ansible-adapter \ - appc-sequence-generator \ - appc-artifact-handler \ - appc-aai-client" - -APPC_FEATURES_1=" \ - onap-appc-core \ - onap-appc-metric \ - onap-appc-dmaap-adapter \ - onap-appc-chef-adapter \ - onap-appc-netconf-adapter \ - onap-appc-rest-adapter \ - onap-appc-lifecycle-management \ - onap-appc-license-manager" - - APPC_FEATURES_2=" \ - onap-appc-dg-util \ - onap-appc-dg-shared \ - onap-appc-sdc-listener \ - onap-appc-oam \ - onap-appc-iaas-adapter \ - onap-appc-ansible-adapter \ - onap-appc-sequence-generator \ - onap-appc-config-generator \ - onap-appc-config-data-services \ - onap-appc-config-adaptor \ - onap-appc-config-audit \ - onap-appc-config-encryption-tool \ - onap-appc-config-flow-controller \ - onap-appc-config-params \ - onap-appc-artifact-handler - onap-appc-aai-client \ - onap-appc-event-listener \ - onap-appc-network-inventory-client \ - onap-appc-design-services \ - onap-appc-interfaces-service" - - APPC_FEATURES_UNZIP=" \ - appc-core \ - appc-metric \ - appc-dmaap-adapter \ - appc-event-listener \ - appc-chef-adapter \ - appc-netconf-adapter \ - appc-rest-adapter \ - appc-lifecycle-management \ - appc-dispatcher \ - appc-provider \ - appc-dg-util \ - appc-dg-shared \ - appc-sdc-listener \ - appc-oam \ - appc-iaas-adapter \ - appc-ansible-adapter \ - appc-sequence-generator \ - appc-config-generator \ - appc-config-data-services \ - appc-config-adaptor \ - appc-config-audit \ - appc-config-encryption-tool \ - appc-config-flow-controller \ - appc-config-params \ - appc-artifact-handler \ - appc-aai-client \ - appc-network-inventory-client \ - appc-design-services \ - appc-interfaces-service" - - -if $ENABLE_ODL_CLUSTER - then - echo "Enabling core APP-C features with clustering enabled" - featureInstall odl-netconf-connector-all - featureInstall odl-restconf-noauth - featureInstall odl-netconf-clustered-topology - else - echo "Enabling core APP-C features with clustering disabled" - featureInstall odl-netconf-connector-all - featureInstall odl-restconf-noauth - featureInstall odl-netconf-topology -fi - -sleep 7s -echo "Installing APP-C Features" -echo "" - -for feature in ${APPC_FEATURES_UNZIP} -do - if [ -f ${APPC_FEATURE_DIR}/${feature}/install-feature.sh ] - then - ${APPC_FEATURE_DIR}/${feature}/install-feature.sh - else - echo "No installer found for feature ${feature}" - fi -done - -#${ODL_HOME}/bin/client feature:install appc-metric appc-dmaap-adapter appc-event-listener appc-chef-adapter appc-netconf-adapter appc-rest-adapter appc-lifecycle-management appc-dispatcher appc-provider appc-dg-util appc-dg-shared appc-sdc-listener appc-oam appc-iaas-adapter appc-ansible-adapter appc-sequence-generator appc-config-generator appc-config-data-services appc-config-adaptor appc-config-audit appc-config-encryption-tool appc-config-flow-controller appc-config-params appc-artifact-handler appc-aai-client - -for feature in ${APPC_FEATURES_1} -do - echo "Installing ${feature}" - start=$(date +%s) - ${ODL_HOME}/bin/client "feature:install -r ${feature}" - end=$(date +%s) - echo "Install of ${feature} took $(expr $end - $start) seconds" - sleep 7s - echo "Sleep Finished" -done - - echo "Installing dispatcher features" - start=$(date +%s) - ${ODL_HOME}/bin/client "feature:install -r onap-appc-request-handler onap-appc-command-executor onap-appc-lifecycle-management onap-appc-workflow-management lock-manager onap-appc-provider" - end=$(date +%s) - echo "Install of dispatcher features took $(expr $end - $start) seconds" - sleep 7s - echo "Sleep Finished" - -for feature in ${APPC_FEATURES_2} -do - echo "Installing ${feature}" - start=$(date +%s) - ${ODL_HOME}/bin/client "feature:install -r ${feature}" - end=$(date +%s) - echo "Install of ${feature} took $(expr $end - $start) seconds" - sleep 7s - echo "Sleep Finished" -done - diff --git a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh index ed35de8f77..ad135f863a 100755 --- a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh +++ b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh @@ -132,8 +132,7 @@ then if $ENABLE_ODL_CLUSTER then - echo "Installing Opendaylight cluster features" - ${ODL_HOME}/bin/client feature:install odl-mdsal-clustering + echo "Enabling Opendaylight cluster features" enable_odl_cluster fi diff --git a/kubernetes/appc/resources/config/appc/opt/onap/ccsdk/bin/startODL.sh b/kubernetes/appc/resources/config/appc/opt/onap/ccsdk/bin/startODL.sh deleted file mode 100755 index 231fd0a24e..0000000000 --- a/kubernetes/appc/resources/config/appc/opt/onap/ccsdk/bin/startODL.sh +++ /dev/null @@ -1,68 +0,0 @@ -#!/bin/bash - -### -# ============LICENSE_START======================================================= -# openECOMP : SDN-C -# ================================================================================ -# Copyright (C) 2017 AT&T Intellectual Property. All rights -# reserved. -# Modifications Copyright © 2018 Amdocs,Bell Canada -# ================================================================================ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# ============LICENSE_END========================================================= -### - - -# Install SDN-C platform components if not already installed and start container - -ODL_HOME=${ODL_HOME:-/opt/opendaylight/current} -ODL_ADMIN_PASSWORD=${ODL_ADMIN_PASSWORD:-Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U} -SDNC_HOME=${SDNC_HOME:-/opt/onap/sdnc} -SLEEP_TIME=${SLEEP_TIME:-120} -MYSQL_PASSWD=${MYSQL_PASSWD:-{{.Values.config.mariadbRootPassword}}} - -# -# Wait for database -# -echo "Waiting for mariadbgalera" -until mysql -h {{.Values.config.mariadbGaleraSVCName}}.{{.Release.Namespace}} -u root -p{{.Values.config.mariadbRootPassword}} mysql &> /dev/null -do - printf "." - sleep 1 -done -echo -e "\nmariadbgalera ready" - -if [ ! -f ${SDNC_HOME}/.installed ] -then - echo "Installing SDN-C database" - ${SDNC_HOME}/bin/installSdncDb.sh - echo "Starting OpenDaylight" - ${ODL_HOME}/bin/start - echo "Waiting ${SLEEP_TIME} seconds for OpenDaylight to initialize" - sleep ${SLEEP_TIME} - echo "Installing SDN-C platform features" - ${SDNC_HOME}/bin/installFeatures.sh - if [ -x ${SDNC_HOME}/svclogic/bin/install.sh ] - then - echo "Installing directed graphs" - ${SDNC_HOME}/svclogic/bin/install.sh - fi - - - echo "Restarting OpenDaylight" - ${ODL_HOME}/bin/stop - echo "Installed at `date`" > ${SDNC_HOME}/.installed -fi - -exec ${ODL_HOME}/bin/karaf - diff --git a/kubernetes/appc/templates/statefulset.yaml b/kubernetes/appc/templates/statefulset.yaml index 6677516990..4fded9aa24 100644 --- a/kubernetes/appc/templates/statefulset.yaml +++ b/kubernetes/appc/templates/statefulset.yaml @@ -32,10 +32,9 @@ spec: app: {{ include "common.name" . }} release: {{ .Release.Name }} spec: - imagePullSecrets: - - name: "{{ include "common.namespace" . }}-docker-registry-key" initContainers: - - command: + - name: {{ include "common.name" . }}-readiness + command: - /root/ready.py args: - --container-name @@ -48,7 +47,12 @@ spec: fieldPath: metadata.namespace image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - name: {{ include "common.name" . }}-readiness + - name: {{ include "common.name" . }}-chown + image: "busybox" + command: ["sh", "-c", "chown -R {{ .Values.config.odlUid }}:{{ .Values.config.odlGid}} {{ .Values.persistence.mdsalPath }}"] + volumeMounts: + - mountPath: {{ .Values.persistence.mdsalPath }} + name: {{ include "common.fullname" . }}-data containers: - name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" @@ -116,9 +120,6 @@ spec: - mountPath: /opt/onap/appc/bin/installAppcDb.sh name: onap-appc-bin subPath: installAppcDb.sh - - mountPath: /opt/onap/appc/bin/installFeatures.sh - name: onap-appc-bin - subPath: installFeatures.sh - mountPath: /opt/onap/appc/bin/health_check.sh name: onap-appc-bin subPath: health_check.sh @@ -137,9 +138,6 @@ spec: - mountPath: /opt/onap/ccsdk/svclogic/bin/showActiveGraphs.sh name: onap-sdnc-svclogic-bin subPath: showActiveGraphs.sh - - mountPath: /opt/onap/ccsdk/bin/startODL.sh - name: onap-sdnc-bin - subPath: startODL.sh - mountPath: /opt/onap/ccsdk/bin/installSdncDb.sh name: onap-sdnc-bin subPath: installSdncDb.sh diff --git a/kubernetes/appc/values.yaml b/kubernetes/appc/values.yaml index 633d4e5bb2..6fa7e65ca6 100644 --- a/kubernetes/appc/values.yaml +++ b/kubernetes/appc/values.yaml @@ -31,7 +31,7 @@ global: flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/appc-image:1.5.1 +image: onap/appc-image:1.5.3 pullPolicy: Always # flag to enable debugging - application support required @@ -39,6 +39,8 @@ debugEnabled: false # application configuration config: + odlUid: 100 + odlGid: 101 ansibleServiceName: appc-ansible-server ansiblePort: 8000 mariadbRootPassword: secretpassword diff --git a/kubernetes/cds/charts/cds-blueprints-processor/values.yaml b/kubernetes/cds/charts/cds-blueprints-processor/values.yaml index 51e8e5bed1..a2e3da688f 100755 --- a/kubernetes/cds/charts/cds-blueprints-processor/values.yaml +++ b/kubernetes/cds/charts/cds-blueprints-processor/values.yaml @@ -59,14 +59,14 @@ affinity: {} # probe configuration parameters liveness: - initialDelaySeconds: 10 + initialDelaySeconds: 120 periodSeconds: 10 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true readiness: - initialDelaySeconds: 10 + initialDelaySeconds: 120 periodSeconds: 10 service: diff --git a/kubernetes/cds/charts/cds-controller-blueprints/values.yaml b/kubernetes/cds/charts/cds-controller-blueprints/values.yaml index c924b2bd5c..b629c5109a 100755 --- a/kubernetes/cds/charts/cds-controller-blueprints/values.yaml +++ b/kubernetes/cds/charts/cds-controller-blueprints/values.yaml @@ -58,14 +58,14 @@ affinity: {} # probe configuration parameters liveness: - initialDelaySeconds: 10 + initialDelaySeconds: 120 periodSeconds: 10 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true readiness: - initialDelaySeconds: 10 + initialDelaySeconds: 120 periodSeconds: 10 service: diff --git a/kubernetes/cds/charts/cds-ui/templates/deployment.yaml b/kubernetes/cds/charts/cds-ui/templates/deployment.yaml index ead1b2edbd..021a6a9425 100644 --- a/kubernetes/cds/charts/cds-ui/templates/deployment.yaml +++ b/kubernetes/cds/charts/cds-ui/templates/deployment.yaml @@ -50,14 +50,22 @@ spec: env: - name: HOST value: 0.0.0.0 - - name: API_BLUEPRINT_CONTROLLER_BASE_URL - value: {{ .Values.config.api.controller.baseUrl }} - - name: API_BLUEPRINT_CONTROLLER_AUTH_TOKEN - value: {{ .Values.config.api.controller.authToken }} - - name: API_BLUEPRINT_PROCESSOR_BASE_URL - value: {{ .Values.config.api.processor.baseUrl }} - - name: API_BLUEPRINT_PROCESSOR_AUTH_TOKEN - value: {{ .Values.config.api.processor.authToken }} + - name: APP_ACTION_DEPLOY_BLUEPRINT_GRPC_ENABLED + value: {{ .Values.config.app.action.deployBlueprint.grpcEnabled }} + - name: API_BLUEPRINT_CONTROLLER_HTTP_BASE_URL + value: {{ .Values.config.api.controller.http.baseUrl }} + - name: API_BLUEPRINT_CONTROLLER_HTTP_AUTH_TOKEN + value: {{ .Values.config.api.controller.http.authToken }} + - name: API_BLUEPRINT_PROCESSOR_HHTP_BASE_URL + value: {{ .Values.config.api.processor.http.baseUrl }} + - name: API_BLUEPRINT_PROCESSOR_HTTP_AUTH_TOKEN + value: {{ .Values.config.api.processor.http.authToken }} + - name: API_BLUEPRINT_PROCESSOR_GRPC_HOST + value: {{ .Values.config.api.processor.grpc.host }} + - name: API_BLUEPRINT_PROCESSOR_GRPC_PORT + value: {{ .Values.config.api.processor.grpc.port }} + - name: API_BLUEPRINT_PROCESSOR_GRPC_AUTH_TOKEN + value: {{ .Values.config.api.processor.grpc.authToken }} readinessProbe: tcpSocket: port: {{ .Values.service.internalPort }} diff --git a/kubernetes/cds/charts/cds-ui/values.yaml b/kubernetes/cds/charts/cds-ui/values.yaml index 036b888ea7..1ba8a17049 100644 --- a/kubernetes/cds/charts/cds-ui/values.yaml +++ b/kubernetes/cds/charts/cds-ui/values.yaml @@ -33,13 +33,23 @@ pullPolicy: Always # application configuration config: + app: + action: + deployBlueprint: + grpcEnabled: true api: controller: - baseUrl: http://cds-controller-blueprints:8080/api/v1 - authToken: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== + http: + baseUrl: http://cds-controller-blueprints:8080/api/v1 + authToken: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== processor: - baseUrl: http://cds-blueprints-processor-http:8080/api/v1 - authToken: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== + http: + baseUrl: http://cds-blueprints-processor-http:8080/api/v1 + authToken: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== + grpc: + host: cds-blueprints-processor-grpc + port: 9111 + authToken: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw== # default number of instances replicaCount: 1 diff --git a/kubernetes/common/cassandra/templates/statefulset.yaml b/kubernetes/common/cassandra/templates/statefulset.yaml index 0c7a112bcb..4be3570851 100644 --- a/kubernetes/common/cassandra/templates/statefulset.yaml +++ b/kubernetes/common/cassandra/templates/statefulset.yaml @@ -74,7 +74,7 @@ spec: timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} successThreshold: {{ .Values.liveness.successThreshold }} failureThreshold: {{ .Values.liveness.failureThreshold }} - {{ end -}} + {{ end }} readinessProbe: exec: command: diff --git a/kubernetes/helm/plugins/deploy/deploy.sh b/kubernetes/helm/plugins/deploy/deploy.sh index 2bbae80a3e..3416a02596 100755 --- a/kubernetes/helm/plugins/deploy/deploy.sh +++ b/kubernetes/helm/plugins/deploy/deploy.sh @@ -206,6 +206,9 @@ deploy() { # upgrade/install each "enabled" subchart cd $CACHE_SUBCHART_DIR/ + #“helm ls” is an expensive command in that it can take a long time to execute. + #So cache the results to prevent repeated execution. + ALL_HELM_RELEASES=$(helm ls -q) for subchart in * ; do SUBCHART_OVERRIDES=$CACHE_SUBCHART_DIR/$subchart/subchart-overrides.yaml @@ -236,7 +239,7 @@ deploy() { fi fi else - array=($(helm ls -q | grep "${RELEASE}-${subchart}")) + array=($(echo "$ALL_HELM_RELEASES" | grep "${RELEASE}-${subchart}")) n=${#array[*]} for (( i = n-1; i >= 0; i-- )); do helm del "${array[i]}" --purge diff --git a/kubernetes/onap/resources/environments/public-cloud.yaml b/kubernetes/onap/resources/environments/public-cloud.yaml index d751534bd9..2d4360c579 100644 --- a/kubernetes/onap/resources/environments/public-cloud.yaml +++ b/kubernetes/onap/resources/environments/public-cloud.yaml @@ -141,7 +141,7 @@ sdnc: so: liveness: initialDelaySeconds: 120 - mariadb: + so-mariadb: liveness: initialDelaySeconds: 900 readiness: diff --git a/kubernetes/onap/resources/overrides/environment.yaml b/kubernetes/onap/resources/overrides/environment.yaml new file mode 100644 index 0000000000..75ce8e529b --- /dev/null +++ b/kubernetes/onap/resources/overrides/environment.yaml @@ -0,0 +1,225 @@ +# Copyright © 2017,2019 Amdocs, AT&T , Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# +# These overrides will affect all helm charts (ie. applications) +# that are listed below and are 'enabled'. +# +# +# This is specifically for the environments which take time to +# deploy ONAP. This increase in timeouts prevents false restarting of +# the pods during startup configuration. +# +# These timers have been tuned by the ONAP integration team. They +# have been tested and validated in the ONAP integration lab (Intel/Windriver lab). +# They are however indicative and may be adapted to your environment as they +# depend on the performance of the infrastructure you are installing ONAP on. +# +# Please note that these timers must remain reasonable, in other words, if +# your infrastructure is not performant enough, extending the timers to very +# large value may not fix all installation issues on over subscribed hardware. +# +################################################################# +aaf: + aaf-cs: + liveness: + initialDelaySeconds: 240 + readiness: + initialDelaySeconds: 240 + aaf-gui: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + aaf-oauth: + liveness: + initialDelaySeconds: 300 + readiness: + initialDelaySeconds: 300 + aaf-service: + liveness: + initialDelaySeconds: 300 + readiness: + initialDelaySeconds: 300 +aai: + liveness: + initialDelaySeconds: 120 + aai-champ: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + aai-data-router: + liveness: + initialDelaySeconds: 120 + aai-sparky-be: + liveness: + initialDelaySeconds: 120 + aai-spike: + liveness: + initialDelaySeconds: 120 + aai-cassandra: + liveness: + periodSeconds: 120 + readiness: + periodSeconds: 60 +appc: + mariadb-galera: + liveness: + initialDelaySeconds: 180 + periodSeconds: 60 +cassandra: + liveness: + initialDelaySeconds: 120 + periodSeconds: 120 + readiness: + initialDelaySeconds: 120 + periodSeconds: 60 +clamp: + liveness: + initialDelaySeconds: 60 + readiness: + initialDelaySeconds: 60 +dcaegen2: + dcae-cloudify-manager: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 +dmaap: + dmaap-bus-controller: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + message-router: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + dmaap-dr-prov: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + mariadb: + liveness: + initialDelaySeconds: 180 + periodSeconds: 60 + dmaap-dr-node: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 +mariadb-galera: + liveness: + initialDelaySeconds: 180 + periodSeconds: 60 + mariadb-galera-server: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 +modeling: + mariadb-galera: + liveness: + initialDelaySeconds: 180 + periodSeconds: 60 +oof: + oof-has: + music: + music-cassandra: + liveness: + periodSeconds: 120 + readiness: + periodSeconds: 60 +portal: + portal-app: + liveness: + initialDelaySeconds: 60 + readiness: + initialDelaySeconds: 60 + portal-cassandra: + liveness: + periodSeconds: 120 + readiness: + periodSeconds: 60 +sdc: + sdc-be: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + sdc-cs: + liveness: + initialDelaySeconds: 120 + periodSeconds: 120 + readiness: + initialDelaySeconds: 120 + periodSeconds: 60 + sdc-es: + liveness: + initialDelaySeconds: 60 + readiness: + initialDelaySeconds: 120 + sdc-onboarding-be: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 +sdnc: + liveness: + initialDelaySeconds: 60 + readiness: + initialDelaySeconds: 60 + dmaap-listener: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 + mariadb-galera: + liveness: + initialDelaySeconds: 180 + periodSeconds: 60 + sdnc-ansible-server: + readiness: + initialDelaySeconds: 120 + sdnc-portal: + readiness: + initialDelaySeconds: 120 + ueb-listener: + liveness: + initialDelaySeconds: 60 + readiness: + initialDelaySeconds: 60 +so: + liveness: + initialDelaySeconds: 120 + mariadb: + liveness: + initialDelaySeconds: 900 + readiness: + initialDelaySeconds: 900 +uui: + uui-server: + liveness: + initialDelaySeconds: 120 + readiness: + initialDelaySeconds: 120 +vfc: + mariadb-galera: + liveness: + initialDelaySeconds: 180 + periodSeconds: 60 diff --git a/kubernetes/onap/resources/overrides/onap-all.yaml b/kubernetes/onap/resources/overrides/onap-all.yaml index 1716415b3e..04fbc97f54 100644 --- a/kubernetes/onap/resources/overrides/onap-all.yaml +++ b/kubernetes/onap/resources/overrides/onap-all.yaml @@ -74,3 +74,5 @@ vid: enabled: true vnfsdk: enabled: true +modeling: + enabled: true diff --git a/kubernetes/policy/charts/brmsgw/resources/config/pe/brmsgw.conf b/kubernetes/policy/charts/brmsgw/resources/config/pe/brmsgw.conf index 7f611a1976..01c79be6e3 100644 --- a/kubernetes/policy/charts/brmsgw/resources/config/pe/brmsgw.conf +++ b/kubernetes/policy/charts/brmsgw/resources/config/pe/brmsgw.conf @@ -63,5 +63,5 @@ BRMS_UEB_API_KEY= BRMS_UEB_API_SECRET= #Dependency.json file version -BRMS_DEPENDENCY_VERSION=1.4.0 -BRMS_MODELS_DEPENDENCY_VERSION=2.0.0 +BRMS_DEPENDENCY_VERSION=1.4.2 +BRMS_MODELS_DEPENDENCY_VERSION=2.0.2 diff --git a/kubernetes/policy/charts/drools/values.yaml b/kubernetes/policy/charts/drools/values.yaml index 08da64d5df..d9582013b1 100644 --- a/kubernetes/policy/charts/drools/values.yaml +++ b/kubernetes/policy/charts/drools/values.yaml @@ -28,7 +28,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-pdpd-cl:1.4.1 +image: onap/policy-pdpd-cl:1.4.2 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/robot/demo-k8s.sh b/kubernetes/robot/demo-k8s.sh index 8b76f64a25..eb6744b1ac 100755 --- a/kubernetes/robot/demo-k8s.sh +++ b/kubernetes/robot/demo-k8s.sh @@ -59,7 +59,7 @@ function usage # Set the defaults -echo "Number of parameters:" +echo "Number of parameters:" echo $# if [ $# -lt 2 ];then @@ -199,7 +199,7 @@ do vfwclosedloop) TAG="vfwclosedloop" shift - VARIABLES="$VARIABLES -v pkg_host:$1" + VARIABLES="$VARIABLES -v PACKET_GENERATOR_HOST:$1 -v pkg_host:$1" shift ;; *) @@ -221,4 +221,3 @@ DISPLAY_NUM=$(($GLOBAL_BUILD_NUMBER + 90)) VARIABLEFILES="-V /share/config/vm_properties.py -V /share/config/integration_robot_properties.py -V /share/config/integration_preload_parameters.py" kubectl --namespace $NAMESPACE exec ${POD} -- ${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} -i ${TAG} --display $DISPLAY_NUM 2> ${TAG}.out - diff --git a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py index 0370bbc71d..1db75b0c18 100644 --- a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py @@ -123,11 +123,16 @@ GLOBAL_MUSIC_SERVER_PORT = "8080" GLOBAL_OOF_SERVER_PROTOCOL = "https" # oof-homing info - everything is from the private oam network (also called onap private network) GLOBAL_OOF_HOMING_SERVER_PORT = "8091" +GLOBAL_OOF_HOMING_USERNAME="{{ .Values.oofHomingUsername }}" +GLOBAL_OOF_HOMING_PASSWORD="{{ .Values.oofHomingPassword }}" # oof-sniro info - everything is from the private oam network (also called onap private network) GLOBAL_OOF_SNIRO_SERVER_PORT = "8698" #oof user GLOBAL_OOF_OSDF_USERNAME="{{ .Values.oofUsername }}" GLOBAL_OOF_OSDF_PASSWORD="{{ .Values.oofPassword }}" +#oof pci user +GLOBAL_OOF_PCI_USERNAME="{{ .Values.oofOsdfPciOptUsername }}" +GLOBAL_OOF_PCI_PASSWORD="{{ .Values.oofOsdfPciOptPassword }}" # oof cmso global info - everything is from the private oam network (also called onap private network) GLOBAL_OOF_CMSO_PROTOCOL = "https" GLOBAL_OOF_CMSO_SERVER_PORT = "8080" @@ -174,6 +179,9 @@ GLOBAL_VID_HEALTH_PASSWORD = '{{ .Values.vidHealthPassword }}' # vnfsdk info - everything is from the private oam network (also called onap private network) GLOBAL_VNFSDK_SERVER_PROTOCOL = "http" GLOBAL_VNFSDK_SERVER_PORT = "8702" + +GLOBAL_DCAE_VES_PROTOCOL = "http" +GLOBAL_DCAE_VES_SERVER_PORT = "8080" #global selenium info GLOBAL_PROXY_WARNING_TITLE="" GLOBAL_PROXY_WARNING_CONTINUE_XPATH="" diff --git a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py index e46b5fc723..9cc30319c7 100644 --- a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py @@ -24,6 +24,7 @@ GLOBAL_INJECTED_CLAMP_IP_ADDR = 'clamp.{{include "common.namespace" .}}' GLOBAL_INJECTED_CLI_IP_ADDR = 'cli.{{include "common.namespace" .}}' GLOBAL_INJECTED_CLOUD_ENV = 'openstack' GLOBAL_INJECTED_DCAE_IP_ADDR = 'dcae-healthcheck.{{include "common.namespace" .}}' +GLOBAL_INJECTED_DCAE_VES_HOST = 'dcae-ves-collector.{{include "common.namespace" .}}' GLOBAL_INJECTED_DMAAP_DR_PROV_IP_ADDR = 'dmaap-dr-prov.{{include "common.namespace" .}}' GLOBAL_INJECTED_DMAAP_DR_NODE_IP_ADDR = 'dmaap-dr-node.{{include "common.namespace" .}}' GLOBAL_INJECTED_DNS_IP_ADDR = 'N/A' @@ -74,6 +75,7 @@ GLOBAL_INJECTED_OPENSTACK_TENANT_ID_REGION_THREE = '{{ .Values.openStackTenantId GLOBAL_INJECTED_OPENSTACK_PROJECT_DOMAIN_REGION_THREE = '{{ .Values.openStackProjectNameRegionThree }}' GLOBAL_INJECTED_OPENSTACK_USER_DOMAIN_REGION_THREE = '{{ .Values.openStackDomainIdRegionThree }}' GLOBAL_INJECTED_OPENSTACK_OAM_NETWORK_CIDR_PREFIX = '{{ .Values.openStackOamNetworkCidrPrefix }}' +GLOBAL_INJECTED_OPENSTACK_PUBLIC_NETWORK = 'public' GLOBAL_INJECTED_POLICY_IP_ADDR = 'pdp.{{include "common.namespace" .}}' GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR = 'drools.{{include "common.namespace" .}}' GLOBAL_INJECTED_PORTAL_IP_ADDR = 'portal-app.{{include "common.namespace" .}}' @@ -119,6 +121,7 @@ GLOBAL_INJECTED_PROPERTIES = { "GLOBAL_INJECTED_CLI_IP_ADDR" : 'cli.{{include "common.namespace" .}}', "GLOBAL_INJECTED_CLOUD_ENV" : 'openstack', "GLOBAL_INJECTED_DCAE_IP_ADDR" : 'dcae-healthcheck.{{include "common.namespace" .}}', + "GLOBAL_INJECTED_DCAE_VES_HOST" : 'dcae-ves-collector.{{include "common.namespace" .}}', "GLOBAL_INJECTED_DMAAP_DR_PROV_IP_ADDR" : 'dmaap-dr-prov.{{include "common.namespace" .}}', "GLOBAL_INJECTED_DMAAP_DR_NODE_IP_ADDR" : 'dmaap-dr-node.{{include "common.namespace" .}}', "GLOBAL_INJECTED_DNS_IP_ADDR" : 'N/A', @@ -165,6 +168,7 @@ GLOBAL_INJECTED_PROPERTIES = { "GLOBAL_INJECTED_OPENSTACK_PROJECT_DOMAIN_REGION_THREE" : '{{ .Values.openStackProjectNameRegionThree }}', "GLOBAL_INJECTED_OPENSTACK_USER_DOMAIN_REGION_THREE" : '{{ .Values.openStackDomainIdRegionThree }}', "GLOBAL_INJECTED_OPENSTACK_OAM_NETWORK_CIDR_PREFIX" : '{{ .Values.openStackOamNetworkCidrPrefix }}', + "GLOBAL_INJECTED_OPENSTACK_PUBLIC_NETWORK" : 'public', "GLOBAL_INJECTED_POLICY_IP_ADDR" : 'pdp.{{include "common.namespace" .}}', "GLOBAL_INJECTED_POLICY_HEALTHCHECK_IP_ADDR" : 'drools.{{include "common.namespace" .}}', "GLOBAL_INJECTED_POLICY_API_IP_ADDR" : 'policy-api.{{include "common.namespace" .}}', diff --git a/kubernetes/robot/values.yaml b/kubernetes/robot/values.yaml index 5d41e065e4..65da947c95 100755..100644 --- a/kubernetes/robot/values.yaml +++ b/kubernetes/robot/values.yaml @@ -22,7 +22,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/testsuite:1.4.0 +image: onap/testsuite:1.4.2 pullPolicy: Always ubuntuInitImage: oomk8s/ubuntu-init:2.0.0 @@ -40,7 +40,7 @@ config: # Demo configuration # Nexus demo artifact version. Maps to GLOBAL_INJECTED_ARTIFACTS_VERSION -demoArtifactsVersion: "1.4.0-SNAPSHOT" +demoArtifactsVersion: "1.4.0" # Nexus demo artifact URL. demoArtifactsRepoUrl: "https://nexus.onap.org/content/repositories/releases" # Openstack medium sized flavour name. Maps GLOBAL_INJECTED_VM_FLAVOR @@ -72,7 +72,7 @@ openStackPasswordRegionThree: "tenantPassword" # this is the java encrypted password that is needed for SO openSackMsoEncryptdPasswordRegionThree: "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" openStackTenantIdRegionThree: "3583253e932845a09cd4c8ca2f31d095" -openStackProjectNameRegionThree: "Integration-HEAT-Staging-Daily" +openStackProjectNameRegionThree: "Integration-SB-RegionThree" openStackDomainIdRegionThree: "Default" # # Openstack glance image name for Ubuntu 14. Maps to GLOBAL_INJECTED_UBUNTU_1404_IMAGE @@ -80,7 +80,7 @@ ubuntu14Image: "Ubuntu_14_trusty" # Openstack glance image name for Ubuntu 16. Maps to GLOBAL_INJECTED_UBUNTU_1604_IMAGE ubuntu16Image: "Ubuntu_16_xenial" # GLOBAL_INJECTED_SCRIPT_VERSION. Maps to GLOBAL_INJECTED_SCRIPT_VERSION -scriptVersion: "1.4.0-SNAPSHOT" +scriptVersion: "1.4.0" # Openstack network to which VNFs will bind their primary (first) interface. Maps to GLOBAL_INJECTED_NETWORK openStackPrivateNetId: "e8f51956-00dd-4425-af36-045716781ffc" # Openstack security group for instantiating VNFs @@ -156,6 +156,11 @@ oofUsername: "oof@oof.onap.org" oofPassword: "demo123456!" cmsoUsername: "oof@oof.onap.org" cmsoPassword: "demo123456!" +oofOsdfPciOptUsername: "oof@oof.onap.org" +oofOsdfPciOptPassword: "demo123456!" +oofHomingUsername: "admin1" +oofHomingPassword: "plan.15" + # default number of instances replicaCount: 1 diff --git a/kubernetes/sdc/charts/sdc-be/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-be/templates/deployment.yaml index 063e2d868f..2d47f4b588 100644 --- a/kubernetes/sdc/charts/sdc-be/templates/deployment.yaml +++ b/kubernetes/sdc/charts/sdc-be/templates/deployment.yaml @@ -69,11 +69,12 @@ spec: - containerPort: {{ .Values.service.internalPort2 }} {{ if eq .Values.liveness.enabled true }} livenessProbe: - exec: - command: - - "/var/lib/ready-probe.sh" + httpGet: + path: /sdc2/rest/version + port: {{ .Values.service.internalPort2 }} initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} periodSeconds: {{ .Values.liveness.periodSeconds }} + timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} {{ end }} readinessProbe: exec: @@ -81,6 +82,7 @@ spec: - "/var/lib/ready-probe.sh" initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} + timeoutSeconds: {{ .Values.readiness.timeoutSeconds }} resources: {{ include "common.resources" . | indent 12 }} env: diff --git a/kubernetes/sdc/charts/sdc-be/values.yaml b/kubernetes/sdc/charts/sdc-be/values.yaml index 371acbb0d4..3363700f8e 100644 --- a/kubernetes/sdc/charts/sdc-be/values.yaml +++ b/kubernetes/sdc/charts/sdc-be/values.yaml @@ -48,8 +48,9 @@ affinity: {} # probe configuration parameters liveness: - initialDelaySeconds: 60 + initialDelaySeconds: 120 periodSeconds: 10 + timeoutSeconds: 5 # necessary to disable liveness probe when setting breakpoints # in debugger so K8s doesn't restart unresponsive container enabled: true @@ -57,6 +58,7 @@ liveness: readiness: initialDelaySeconds: 60 periodSeconds: 10 + timeoutSeconds: 5 service: type: NodePort diff --git a/kubernetes/so/values.yaml b/kubernetes/so/values.yaml index cf90eb1d9a..f94ddc8de3 100755 --- a/kubernetes/so/values.yaml +++ b/kubernetes/so/values.yaml @@ -43,7 +43,7 @@ global: # Application configuration defaults. ################################################################# repository: nexus3.onap.org:10001 -image: onap/so/api-handler-infra:1.4.3 +image: onap/so/api-handler-infra:1.4.4 pullPolicy: Always replicaCount: 1 diff --git a/kubernetes/uui/charts/uui-server/values.yaml b/kubernetes/uui/charts/uui-server/values.yaml index fc75a1666c..c58eb81f37 100644 --- a/kubernetes/uui/charts/uui-server/values.yaml +++ b/kubernetes/uui/charts/uui-server/values.yaml @@ -25,7 +25,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/usecase-ui-server:1.2.1 +image: onap/usecase-ui-server:2.0.1 pullPolicy: Always # application configuration diff --git a/kubernetes/uui/values.yaml b/kubernetes/uui/values.yaml index 2cea5775d4..4d1f8887df 100644 --- a/kubernetes/uui/values.yaml +++ b/kubernetes/uui/values.yaml @@ -25,7 +25,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/usecase-ui:1.2.2 +image: onap/usecase-ui:2.0.1 pullPolicy: Always # application configuration diff --git a/kubernetes/vid/values.yaml b/kubernetes/vid/values.yaml index e274b7abbf..0825c76fb0 100644 --- a/kubernetes/vid/values.yaml +++ b/kubernetes/vid/values.yaml @@ -27,7 +27,7 @@ subChartsOnly: # application image repository: nexus3.onap.org:10001 -image: onap/vid:4.3.0 +image: onap/vid:4.3.1 pullPolicy: Always # mariadb image for initializing |