diff options
Diffstat (limited to 'kubernetes/so/charts/so-mariadb/templates')
8 files changed, 235 insertions, 203 deletions
diff --git a/kubernetes/so/charts/so-mariadb/templates/NOTES.txt b/kubernetes/so/charts/so-mariadb/templates/NOTES.txt deleted file mode 100755 index c60c745ca3..0000000000 --- a/kubernetes/so/charts/so-mariadb/templates/NOTES.txt +++ /dev/null @@ -1,19 +0,0 @@ -1. Get the application URL by running these commands: -{{- if .Values.ingress.enabled }} -{{- range .Values.ingress.hosts }} - http://{{ . }} -{{- end }} -{{- else if contains "NodePort" .Values.service.type }} - export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) - export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") - echo http://$NODE_IP:$NODE_PORT -{{- else if contains "LoadBalancer" .Values.service.type }} - NOTE: It may take a few minutes for the LoadBalancer IP to be available. - You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' - export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') - echo http://$SERVICE_IP:{{ .Values.service.externalPort }} -{{- else if contains "ClusterIP" .Values.service.type }} - export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") - echo "Visit http://127.0.0.1:8080 to use your application" - kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} -{{- end }} diff --git a/kubernetes/so/charts/so-mariadb/templates/configmap.yaml b/kubernetes/so/charts/so-mariadb/templates/configmap.yaml deleted file mode 100755 index a470bb268c..0000000000 --- a/kubernetes/so/charts/so-mariadb/templates/configmap.yaml +++ /dev/null @@ -1,25 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -apiVersion: v1 -kind: ConfigMap -metadata: - name: confd-configmap - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ .Release.Name }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/*").AsConfig . | indent 2 }}
\ No newline at end of file diff --git a/kubernetes/so/charts/so-mariadb/templates/deployment.yaml b/kubernetes/so/charts/so-mariadb/templates/deployment.yaml deleted file mode 100755 index 6c7b85fbc8..0000000000 --- a/kubernetes/so/charts/so-mariadb/templates/deployment.yaml +++ /dev/null @@ -1,110 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -apiVersion: extensions/v1beta1 -kind: Deployment -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ .Release.Name }} - heritage: {{ .Release.Service }} -spec: - replicas: {{ .Values.replicaCount }} - template: - metadata: - labels: - app: {{ include "common.name" . }} - release: {{ .Release.Name }} - spec: - hostname: mariadb - initContainers: - - name: {{ include "common.name" . }}-inject-testlab-project - command: - - /bin/bash - - -c - - > - git clone -b {{ .Values.config.gerritBranch }} --single-branch {{ .Values.config.gerritProject }} /tmp/gerrit; - echo "Clone complete. Copying from /tmp/gerrit/volumes/mariadb/docker-entrypoint-initdb.d to /docker-entrypoint-initdb.d"; - cp -rf /tmp/gerrit/volumes/mariadb/docker-entrypoint-initdb.d/* /docker-entrypoint-initdb.d; - chmod -R 755 /docker-entrypoint-initdb.d; - echo "Done."; - image: "{{ .Values.global.ubuntuInitRepository }}/{{ .Values.ubuntuInitImage }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - volumeMounts: - - name: docker-entrypoint-initdb-d - mountPath: "/docker-entrypoint-initdb.d" - containers: - - name: {{ include "common.name" . }} - image: "{{ include "common.repository" . }}/{{ .Values.image }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - ports: - - containerPort: {{ .Values.service.internalPort }} - {{ if eq .Values.liveness.enabled true }} - livenessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} - periodSeconds: {{ .Values.liveness.periodSeconds }} - {{ end }} - readinessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} - periodSeconds: {{ .Values.readiness.periodSeconds }} - env: - - name: MYSQL_ROOT_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: db-root-password - volumeMounts: - - mountPath: /var/lib/mysql - name: mariadb-data - - mountPath: /etc/localtime - name: localtime - readOnly: true - - mountPath: /etc/mysql/conf.d - name: mariadb-conf - - name: docker-entrypoint-initdb-d - mountPath: "/docker-entrypoint-initdb.d" - resources: -{{ include "common.resources" . | indent 12 }} - {{- if .Values.nodeSelector }} - nodeSelector: -{{ toYaml .Values.nodeSelector | indent 10 }} - {{- end -}} - {{- if .Values.affinity }} - affinity: -{{ toYaml .Values.affinity | indent 10 }} - {{- end }} - volumes: - - name: mariadb-data - {{- if .Values.persistence.enabled }} - persistentVolumeClaim: - claimName: {{ include "common.fullname" . }} - {{- else }} - emptyDir: {} - {{- end }} - - name: mariadb-conf - configMap: - name: confd-configmap - - name: localtime - hostPath: - path: /etc/localtime - - name: docker-entrypoint-initdb-d - emptyDir: {} - imagePullSecrets: - - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/so/charts/so-mariadb/templates/job.yaml b/kubernetes/so/charts/so-mariadb/templates/job.yaml new file mode 100755 index 0000000000..a20564e513 --- /dev/null +++ b/kubernetes/so/charts/so-mariadb/templates/job.yaml @@ -0,0 +1,193 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +{{- if .Values.global.migration.enabled }} +apiVersion: batch/v1 +kind: Job +metadata: + name: {{ include "common.fullname" . }}-backup + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + "helm.sh/hook": pre-upgrade,pre-install + "helm.sh/hook-weight": "1" + "helm.sh/hook-delete-policy": before-hook-creation +spec: + backoffLimit: 20 + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + name: {{ include "common.name" . }} + spec: + containers: + - name: {{ include "common.fullname" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + env: + - name: DB_HOST + value: {{ .Values.global.migration.dbHost }} + - name: DB_USER + value: {{ .Values.global.migration.dbUser }} + - name: DB_PORT + value: "{{ .Values.global.migration.dbPort }}" + - name: DB_PASS + valueFrom: + secretKeyRef: + name: {{ template "common.fullname" . }}-migration + key: db-root-password-backup + command: + - /bin/bash + - -c + - mysqldump -vv --user=${DB_USER} --password=${DB_PASS} --host=${DB_HOST} --port=${DB_PORT} --databases --single-transaction --quick --lock-tables=false catalogdb requestdb > /var/data/mariadb/backup-`date +%s`.sql + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - name: backup-storage + mountPath: /var/data/mariadb + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: backup-storage + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }}-migration + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" + restartPolicy: Never +--- +{{- end }} +apiVersion: batch/v1 +kind: Job +metadata: + name: {{ include "common.fullname" . }}-config-job + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + "helm.sh/hook": post-upgrade,post-rollback,post-install + "helm.sh/hook-weight": "0" + "helm.sh/hook-delete-policy": before-hook-creation +spec: + backoffLimit: 20 + template: + metadata: + labels: + app: {{ include "common.name" . }}-job + release: {{ .Release.Name }} + name: {{ include "common.name" . }} + spec: + initContainers: + - name: {{ include "common.name" . }}-readiness + command: + - /root/ready.py + args: + - --container-name + - {{ .Values.global.mariadbGalera.nameOverride }} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + - name: {{ include "common.name" . }}-inject-testlab-project + command: + - /bin/bash + - -c + - > + git clone -b {{ .Values.config.gerritBranch }} --single-branch {{ .Values.config.gerritProject }} /tmp/gerrit; + echo "Clone complete. Copying from /tmp/gerrit/volumes/mariadb/docker-entrypoint-initdb.d to /docker-entrypoint-initdb.d"; + cp -rf /tmp/gerrit/volumes/mariadb/docker-entrypoint-initdb.d/* /docker-entrypoint-initdb.d; + chmod -R 755 /docker-entrypoint-initdb.d; + echo "Done."; + image: "{{ .Values.global.ubuntuInitRepository }}/{{ .Values.ubuntuInitImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - name: docker-entrypoint-initdb-d + mountPath: "/docker-entrypoint-initdb.d" + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /bin/bash + - -c + - > + mysql() { /usr/bin/mysql -h ${DB_HOST} -P ${DB_PORT} "$@"; }; + export -f mysql; + mysql --user=root --password=${MYSQL_ROOT_PASSWORD} requestdb -e exit > /dev/null 2>&1 {{ if not .Values.global.migration.enabled }} && echo "Database already initialized!!!" && exit 0 {{ end }}; + for f in /docker-entrypoint-initdb.d/*; do case "$f" in *.sh) echo "$0: running $f"; . "$f" ;; *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; *) echo "$0: ignoring $f" ;; esac; echo; done; + {{- if .Values.global.migration.enabled }} + mysql -vv --user=root --password=${MYSQL_ROOT_PASSWORD} < `ls -tr /var/data/mariadb/* | tail -1`; + {{- end }} + env: + - name: DB_HOST + valueFrom: + secretKeyRef: + name: {{ .Release.Name}}-so-db-secrets + key: mariadb.readwrite.host + - name: DB_PORT + valueFrom: + secretKeyRef: + name: {{ .Release.Name}}-so-db-secrets + key: mariadb.readwrite.port + - name: MYSQL_ROOT_PASSWORD + valueFrom: + secretKeyRef: + name: {{ template "common.fullname" . }} + key: db-root-password + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - name: docker-entrypoint-initdb-d + mountPath: "/docker-entrypoint-initdb.d" + {{- if .Values.global.migration.enabled }} + - name: backup-storage + mountPath: /var/data/mariadb + {{- end }} + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: docker-entrypoint-initdb-d + emptyDir: {} + {{- if .Values.global.migration.enabled }} + - name: backup-storage + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }}-migration + {{- end }} + restartPolicy: Never + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/so/charts/so-mariadb/templates/pv.yaml b/kubernetes/so/charts/so-mariadb/templates/pv.yaml index d1e1b04121..5f5d09e2eb 100755 --- a/kubernetes/so/charts/so-mariadb/templates/pv.yaml +++ b/kubernetes/so/charts/so-mariadb/templates/pv.yaml @@ -1,5 +1,5 @@ {{/* -# Copyright © 2017 Amdocs, Bell Canada +# Copyright ▒ 2017 Amdocs, Bell Canada # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -13,18 +13,23 @@ # See the License for the specific language governing permissions and # limitations under the License. */}} -{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} + +{{- if .Values.global.migration.enabled }} kind: PersistentVolume apiVersion: v1 metadata: - name: {{ include "common.fullname" . }} + name: {{ include "common.fullname" . }}-migration namespace: {{ include "common.namespace" . }} labels: app: {{ include "common.name" . }} chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" release: "{{ .Release.Name }}" heritage: "{{ .Release.Service }}" - name: {{ include "common.fullname" . }} + name: {{ include "common.fullname" . }}-migration + annotations: + "helm.sh/hook": pre-upgrade,pre-install + "helm.sh/hook-weight": "0" + "helm.sh/hook-delete-policy": before-hook-creation spec: capacity: storage: {{ .Values.persistence.size}} @@ -33,4 +38,4 @@ spec: persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} hostPath: path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }} -{{- end -}}
\ No newline at end of file +{{- end }} diff --git a/kubernetes/so/charts/so-mariadb/templates/pvc.yaml b/kubernetes/so/charts/so-mariadb/templates/pvc.yaml index 74ba690fa6..92d5eed0c4 100755 --- a/kubernetes/so/charts/so-mariadb/templates/pvc.yaml +++ b/kubernetes/so/charts/so-mariadb/templates/pvc.yaml @@ -1,5 +1,5 @@ {{/* -# Copyright © 2017 Amdocs, Bell Canada +# Copyright ▒ 2017 Amdocs, Bell Canada # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -13,25 +13,29 @@ # See the License for the specific language governing permissions and # limitations under the License. */}} -{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} + +{{- if .Values.global.migration.enabled }} kind: PersistentVolumeClaim apiVersion: v1 metadata: - name: {{ include "common.fullname" . }} + name: {{ include "common.fullname" . }}-migration namespace: {{ include "common.namespace" . }} labels: app: {{ include "common.name" . }} chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" release: "{{ .Release.Name }}" heritage: "{{ .Release.Service }}" -{{- if .Values.persistence.annotations }} annotations: + "helm.sh/hook": pre-upgrade,pre-install + "helm.sh/hook-weight": "-1" + "helm.sh/hook-delete-policy": before-hook-creation +{{- if .Values.persistence.annotations }} {{ toYaml .Values.persistence.annotations | indent 4 }} {{- end }} spec: selector: matchLabels: - name: {{ include "common.fullname" . }} + name: {{ include "common.fullname" . }}-migration accessModes: - {{ .Values.persistence.accessMode }} resources: @@ -44,4 +48,5 @@ spec: storageClassName: "{{ .Values.persistence.storageClass }}" {{- end }} {{- end }} -{{- end -}}
\ No newline at end of file +{{- end }} + diff --git a/kubernetes/so/charts/so-mariadb/templates/secrets.yaml b/kubernetes/so/charts/so-mariadb/templates/secrets.yaml index 24f7139ee0..99ccb55445 100755 --- a/kubernetes/so/charts/so-mariadb/templates/secrets.yaml +++ b/kubernetes/so/charts/so-mariadb/templates/secrets.yaml @@ -23,4 +23,24 @@ metadata: heritage: {{ .Release.Service }} type: Opaque data: - db-root-password: {{ .Values.config.mariadbRootPassword | b64enc | quote }}
\ No newline at end of file + db-root-password: {{ .Values.global.mariadbGalera.mariadbRootPassword | b64enc | quote }} +{{- if .Values.global.migration.enabled }} +--- +apiVersion: v1 +kind: Secret +metadata: + name: {{ include "common.fullname" . }}-migration + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + "helm.sh/hook": pre-upgrade,pre-install + "helm.sh/hook-weight": "0" + "helm.sh/hook-delete-policy": before-hook-creation +type: Opaque +data: + db-root-password-backup: {{ .Values.global.migration.dbPassword | b64enc | quote }} +{{- end }} diff --git a/kubernetes/so/charts/so-mariadb/templates/service.yaml b/kubernetes/so/charts/so-mariadb/templates/service.yaml deleted file mode 100755 index 010dc71474..0000000000 --- a/kubernetes/so/charts/so-mariadb/templates/service.yaml +++ /dev/null @@ -1,37 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -apiVersion: v1 -kind: Service -metadata: - name: {{ include "common.servicename" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ .Release.Name }} - heritage: {{ .Release.Service }} -spec: - type: {{ .Values.service.type }} - ports: - - name: {{ .Values.service.portName }} - {{ if eq .Values.service.type "NodePort" }} - port: {{ .Values.service.internalPort }} - nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.nodePort }} - {{ else }} - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - {{ end }} - selector: - app: {{ include "common.name" . }} - release: {{ .Release.Name }}
\ No newline at end of file |