100 files changed, 654 insertions, 2583 deletions
diff --git a/kubernetes/sdc/Makefile b/kubernetes/sdc/Makefile
new file mode 100644
index 0000000000..3dab31fad0
--- /dev/null
+++ b/kubernetes/sdc/Makefile
@@ -0,0 +1,57 @@
+# Copyright © 2020 Samsung Electronics, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
+OUTPUT_DIR := $(ROOT_DIR)/../dist
+PACKAGE_DIR := $(OUTPUT_DIR)/packages
+SECRET_DIR := $(OUTPUT_DIR)/secrets
+
+EXCLUDES := dist resources templates charts docker
+HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
+
+HELM_VER := $(shell helm version --template "{{.Version}}")
+
+.PHONY: $(EXCLUDES) $(HELM_CHARTS)
+
+all: $(HELM_CHARTS)
+
+$(HELM_CHARTS):
+	@echo "\n[$@]"
+	@make package-$@
+
+make-%:
+	@if [ -f $*/Makefile ]; then make -C $*; fi
+
+dep-%: make-%
+	@if [ -f $*/requirements.yaml ]; then helm dep up $*; fi
+
+lint-%: dep-%
+	@if [ -f $*/Chart.yaml ]; then helm lint $*; fi
+
+package-%: lint-%
+	@mkdir -p $(PACKAGE_DIR)
+ifeq "$(findstring v3,$(HELM_VER))" "v3"
+	@if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$(helm package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && helm push -f $$PACKAGE_NAME local; fi
+else
+	@if [ -f $*/Chart.yaml ]; then helm package -d $(PACKAGE_DIR) $*; fi
+endif
+
+	@helm repo index $(PACKAGE_DIR)
+
+clean:
+	@rm -f */requirements.lock
+	@rm -f *tgz */charts/*tgz
+	@rm -rf $(PACKAGE_DIR)
+%:
+	@:
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/Chart.yaml b/kubernetes/sdc/charts/sdc-dcae-be/Chart.yaml
deleted file mode 100644
index ca6e48d03d..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/Chart.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP SDC DCAE Backend client of TOSCALAB and SDC
-name: sdc-dcae-be
-version: 6.0.0
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/resources/config/logging/logback.xml b/kubernetes/sdc/charts/sdc-dcae-be/resources/config/logging/logback.xml
deleted file mode 100644
index 8d1e5cd4ea..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/resources/config/logging/logback.xml
+++ /dev/null
@@ -1,205 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-================================================================================
-Copyright (C) 2018 AT&T Intellectual Property
-================================================================================
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-================================================================================
--->
-
-<configuration scan="true" scanPeriod="3 seconds">
-    <property name="logDir" value="/var/log/onap" />
-    <property name="componentName" scope="system" value="sdc"></property>
-    <property name="subComponentName" scope="system" value="dcae-be"></property>
-    <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
-    <property file="${config.home}/dcae-be/configuration.yaml" />
-    <property name="enable-all-log" scope="context" value="false" />
-    <!--  log file names -->
-    <property name="errorLogName" value="error" />
-    <property name="metricsLogName" value="metrics" />
-    <property name="auditLogName" value="audit" />
-    <property name="debugLogName" value="debug" />
-    <property name="transactionLogName" value="transaction" />
-    <property name="allLogName" value="all" />
-    <property name="queueSize" value="256" />
-    <property name="maxFileSize" value="50MB" />
-    <property name="maxHistory" value="30" />
-    <property name="totalSizeCap" value="10GB" />
-    <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
-    <!-- All log -->
-    <if condition='property("enable-all-log").equalsIgnoreCase("true")'>
-        <then>
-            <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ALL_ROLLING">
-                <file>${logDirectory}/${allLogName}.log</file>
-                <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-                    <fileNamePattern>${logDirectory}/${allLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-                    <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                        <maxFileSize>${maxFileSize}</maxFileSize>
-                    </timeBasedFileNamingAndTriggeringPolicy>
-                    <maxHistory>${maxHistory}</maxHistory>
-                    <totalSizeCap>${totalSizeCap}</totalSizeCap>
-                </rollingPolicy>
-                <encoder>
-                    <pattern>${pattern}</pattern>
-                </encoder>
-            </appender>
-            <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ALL">
-                <appender-ref ref="ALL_ROLLING" />
-            </appender>
-        </then>
-    </if>
-    <!-- Error log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ERROR_ROLLING">
-        <file>${logDirectory}/${errorLogName}.log</file>
-        <!-- Audit messages filter - deny audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>AUDIT_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- Transaction messages filter - deny Transaction messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
-        <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-            <level>INFO</level>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Debug log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="DEBUG_ROLLING">
-        <file>${logDirectory}/${debugLogName}.log</file>
-        <!-- No need to deny audit messages - they are INFO only, will be denied
-                        anyway -->
-        <!-- Transaction messages filter - deny Transaction messages, there are
-                        some DEBUG level messages among them -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- accept DEBUG and TRACE level -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.GEventEvaluator">
-                <expression>e.level.toInt() &lt;= DEBUG.toInt()</expression>
-            </evaluator>
-            <OnMismatch>DENY</OnMismatch>
-            <OnMatch>NEUTRAL</OnMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Audit log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="AUDIT_ROLLING">
-        <file>${logDirectory}/${auditLogName}.log</file>
-        <!-- Audit messages filter - accept audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>AUDIT_MARKER</marker>
-            </evaluator>
-            <onMismatch>DENY</onMismatch>
-            <onMatch>ACCEPT</onMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- SdncTransaction log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="TRANSACTION_ROLLING">
-        <file>${logDirectory}/${transactionLogName}.log</file>
-        <!-- Transaction messages filter - accept audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>DENY</onMismatch>
-            <onMatch>ACCEPT</onMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${transactionLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Asynchronicity Configurations -->
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_DEBUG">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="DEBUG_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_TRANSACTION">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="TRANSACTION_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ERROR">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="ERROR_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_AUDIT">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="AUDIT_ROLLING" />
-    </appender>
-    <root level="INFO">
-        <appender-ref ref="ASYNC_ERROR" />
-        <appender-ref ref="ASYNC_DEBUG" />
-        <appender-ref ref="ASYNC_AUDIT" />
-        <appender-ref ref="ASYNC_TRANSACTION" />
-        <if condition='property("enable-all-log").equalsIgnoreCase("true")'>
-            <then>
-                <appender-ref ref="ALL_ROLLING" />
-            </then>
-        </if>
-    </root>
-    <logger level="INFO" name="org.openecomp.sdc" />
-</configuration>
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-dcae-be/templates/NOTES.txt
deleted file mode 100644
index 41f9706fec..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/templates/configmap.yaml b/kubernetes/sdc/charts/sdc-dcae-be/templates/configmap.yaml
deleted file mode 100644
index 5c6af2085a..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/templates/configmap.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-logging-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
-\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-dcae-be/templates/deployment.yaml
deleted file mode 100644
index a8e9403ef4..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/templates/deployment.yaml
+++ /dev/null
@@ -1,187 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - name: {{ include "common.name" . }}-readiness
-        command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - "sdc-be"
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-      - name: {{ include "common.name" . }}-job-completion
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
-        command:
-        - /app/ready.py
-        args:
-        - --job-name
-        - {{ include "common.release" . }}-sdc-be-config-backend
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-      - name: {{ include "common.name" . }}-update-config
-        image: "{{ .Values.global.envsubstImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        command:
-          - sh
-        args:
-          - -c
-          - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config-output/${PFILE}; chmod 0755 /config-output/${PFILE}; done"
-        env:
-          - name: KEYSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: keystore_password
-          - name: TRUSTSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: truststore_password
-        volumeMounts:
-          - name: {{ include "common.fullname" . }}-environments
-            mountPath: /config-input/
-          - name: sdc-environments-output
-            mountPath: /config-output/
-      containers:
-        - name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          - containerPort: {{ .Values.service.internalPort2 }}
-          {{ if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort2 }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end }}
-          readinessProbe:
-            httpGet:
-              path: /dcae/conf/composition
-              port: {{ .Values.service.internalPort2 }}
-              scheme: HTTPS
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: ENVNAME
-            value: {{ .Values.global.env.name }}
-          - name: JAVA_OPTIONS
-            value: {{ .Values.config.javaOptions }}
-          - name: HOST_IP
-            valueFrom:
-              fieldRef:
-                fieldPath: status.podIP
-          volumeMounts:
-          - name: sdc-environments-output
-            mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/chef-solo/cookbooks/Deploy-DCAE/files/default/org.onap.sdc.p12
-            subPath: org.onap.sdc.p12
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/chef-solo/cookbooks/Deploy-DCAE/files/default/org.onap.sdc.trust.jks
-            subPath: org.onap.sdc.trust.jks
-          - name: {{ include "common.fullname" . }}-localtime
-            mountPath: /etc/localtime
-            readOnly: true
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/lib/jetty/logs
-          - name: {{ include "common.fullname" . }}-logback
-            mountPath: /tmp/logback.xml
-            subPath: logback.xml
-          lifecycle:
-            postStart:
-              exec:
-                command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/dcae-be/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-
-        # side car containers
-        - name: {{ include "common.name" . }}-filebeat-onap
-          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-filebeat-conf
-            mountPath: /usr/share/filebeat/filebeat.yml
-            subPath: filebeat.yml
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          - name: {{ include "common.fullname" . }}-data-filebeat
-            mountPath: /usr/share/filebeat/data
-      volumes:
-      - name: {{ include "common.fullname" . }}-localtime
-        hostPath:
-          path: /etc/localtime
-      - name: sdc-cert
-        secret:
-          secretName: sdc-cert
-      - name: {{ include "common.fullname" . }}-filebeat-conf
-        configMap:
-          name: {{ include "common.release" . }}-sdc-filebeat-configmap
-      - name: {{ include "common.fullname" . }}-data-filebeat
-        emptyDir: {}
-      - name: {{ include "common.fullname" . }}-logback
-        configMap:
-          name : {{ include "common.fullname" . }}-logging-configmap
-      - name: {{ include "common.fullname" . }}-environments
-        configMap:
-          name: {{ include "common.release" . }}-sdc-environments-configmap
-          defaultMode: 0755
-      - name: sdc-environments-output
-        emptyDir: { medium: "Memory" }
-      - name: {{ include "common.fullname" . }}-logs
-        emptyDir: {}
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/templates/job.yaml b/kubernetes/sdc/charts/sdc-dcae-be/templates/job.yaml
deleted file mode 100644
index 5be29eee97..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/templates/job.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: batch/v1
-kind: Job
-metadata:
-  name: {{ include "common.fullname" . }}-tools
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}-job
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  backoffLimit: 20
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}-job
-        release: {{ include "common.release" . }}
-    spec:
-      restartPolicy: Never
-      initContainers:
-      - name: {{ include "common.name" . }}-init-readiness
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - {{ include "common.name" . }}
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-      containers:
-      - name: {{ include "common.name" . }}-job
-        image: {{ include "common.repository" . }}/{{ .Values.backendInitImage }}
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        volumeMounts:
-        - name: {{ include "common.fullname" . }}-environments
-          mountPath: /var/lib/jetty/chef-solo/environments
-        env:
-        - name: ENVNAME
-          value: {{ .Values.global.env.name }}
-        - name: HOST_IP
-          valueFrom:
-            fieldRef:
-              fieldPath: status.podIP
-      volumes:
-      - name: {{ include "common.fullname" . }}-environments
-        configMap:
-          name: {{ include "common.release" . }}-sdc-environments-configmap
-          defaultMode: 0755
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
-      restartPolicy: Never
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/templates/service.yaml b/kubernetes/sdc/charts/sdc-dcae-be/templates/service.yaml
deleted file mode 100644
index 71edaf5734..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/templates/service.yaml
+++ /dev/null
@@ -1,56 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-    msb.onap.org/service-info: '[
-      {
-          "serviceName": "sdc-dcae-be",
-          "version": "v1",
-          "url": "/dcae",
-          "protocol": "REST",
-          "port": "{{ .Values.service.internalPort2 }}",
-          "visualRange": "1"
-      }
-    ]'
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}
-    - port: {{ .Values.service.internalPort2 }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.service.portName2 }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    - port: {{ .Values.service.externalPort2 }}
-      targetPort: {{ .Values.service.internalPort2 }}
-      name: {{ .Values.service.portName2 }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/values.yaml b/kubernetes/sdc/charts/sdc-dcae-be/values.yaml
deleted file mode 100644
index ece8ed5426..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-be/values.yaml
+++ /dev/null
@@ -1,96 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  readinessImage: onap/oom/readiness:3.0.1
-  loggingRepository: docker.elastic.co
-  loggingImage: beats/filebeat:5.5.0
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image: onap/dcae-be:1.3.4
-pullPolicy: Always
-backendInitImage: onap/dcae-tools:1.3.4
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-config:
-  javaOptions: -XX:MaxPermSize=256m -Xmx1024m -Dconfig.home=config -Dlog.home=/var/lib/jetty/logs/ -Dlogging.config=config/dcae-be/logback-spring.xml
-  cassandraSslEnabled: "false"
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 240
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: false
-
-readiness:
-  initialDelaySeconds: 240
-  periodSeconds: 10
-
-service:
-  type: ClusterIP
-  name: sdc-dcae-be
-  portName: sdc-dcae-be-8082
-  externalPort: 8082
-  internalPort: 8082
-  portName2: sdc-dcae-be-8444
-  externalPort2: 8444
-  internalPort2: 8444
-
-ingress:
-  enabled: false
-  service:
-    - baseaddr: "sdc.dcae.plugin"
-      name: "sdc-dcae-be"
-      port: 8282
-  config:
-    ssl: "none"
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 4Gi
-    requests:
-      cpu: 10m
-      memory: 1Gi
-  large:
-    limits:
-      cpu: 2
-      memory: 8Gi
-    requests:
-      cpu: 20m
-      memory: 2Gi
-  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/Chart.yaml b/kubernetes/sdc/charts/sdc-dcae-dt/Chart.yaml
deleted file mode 100644
index ae38135e2e..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/Chart.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description:  ONAP DCAE desiner composition tool for creating customized templates
-name: sdc-dcae-dt
-version: 6.0.0
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/resources/config/logging/logback.xml b/kubernetes/sdc/charts/sdc-dcae-dt/resources/config/logging/logback.xml
deleted file mode 100644
index 89fd30159c..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/resources/config/logging/logback.xml
+++ /dev/null
@@ -1,205 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-================================================================================
-Copyright (C) 2018 AT&T Intellectual Property
-================================================================================
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-   http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-================================================================================
--->
-
-<configuration scan="true" scanPeriod="3 seconds">
-    <property name="logDir" value="/var/log/onap" />
-    <property name="componentName" scope="system" value="sdc"></property>
-    <property name="subComponentName" scope="system" value="dcae-dt"></property>
-    <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
-    <property file="${config.home}/dcae-dt/configuration.yaml" />
-    <property name="enable-all-log" scope="context" value="false" />
-    <!--  log file names -->
-    <property name="errorLogName" value="error" />
-    <property name="metricsLogName" value="metrics" />
-    <property name="auditLogName" value="audit" />
-    <property name="debugLogName" value="debug" />
-    <property name="transactionLogName" value="transaction" />
-    <property name="allLogName" value="all" />
-    <property name="queueSize" value="256" />
-    <property name="maxFileSize" value="50MB" />
-    <property name="maxHistory" value="30" />
-    <property name="totalSizeCap" value="10GB" />
-    <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
-    <!-- All log -->
-    <if condition='property("enable-all-log").equalsIgnoreCase("true")'>
-        <then>
-            <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ALL_ROLLING">
-                <file>${logDirectory}/${allLogName}.log</file>
-                <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-                    <fileNamePattern>${logDirectory}/${allLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-                    <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                        <maxFileSize>${maxFileSize}</maxFileSize>
-                    </timeBasedFileNamingAndTriggeringPolicy>
-                    <maxHistory>${maxHistory}</maxHistory>
-                    <totalSizeCap>${totalSizeCap}</totalSizeCap>
-                </rollingPolicy>
-                <encoder>
-                    <pattern>${pattern}</pattern>
-                </encoder>
-            </appender>
-            <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ALL">
-                <appender-ref ref="ALL_ROLLING" />
-            </appender>
-        </then>
-    </if>
-    <!-- Error log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ERROR_ROLLING">
-        <file>${logDirectory}/${errorLogName}.log</file>
-        <!-- Audit messages filter - deny audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>AUDIT_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- Transaction messages filter - deny Transaction messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
-        <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-            <level>INFO</level>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Debug log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="DEBUG_ROLLING">
-        <file>${logDirectory}/${debugLogName}.log</file>
-        <!-- No need to deny audit messages - they are INFO only, will be denied
-                        anyway -->
-        <!-- Transaction messages filter - deny Transaction messages, there are
-                        some DEBUG level messages among them -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- accept DEBUG and TRACE level -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.GEventEvaluator">
-                <expression>e.level.toInt() &lt;= DEBUG.toInt()</expression>
-            </evaluator>
-            <OnMismatch>DENY</OnMismatch>
-            <OnMatch>NEUTRAL</OnMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Audit log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="AUDIT_ROLLING">
-        <file>${logDirectory}/${auditLogName}.log</file>
-        <!-- Audit messages filter - accept audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>AUDIT_MARKER</marker>
-            </evaluator>
-            <onMismatch>DENY</onMismatch>
-            <onMatch>ACCEPT</onMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- SdncTransaction log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="TRANSACTION_ROLLING">
-        <file>${logDirectory}/${transactionLogName}.log</file>
-        <!-- Transaction messages filter - accept audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>DENY</onMismatch>
-            <onMatch>ACCEPT</onMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${transactionLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Asynchronicity Configurations -->
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_DEBUG">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="DEBUG_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_TRANSACTION">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="TRANSACTION_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ERROR">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="ERROR_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_AUDIT">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="AUDIT_ROLLING" />
-    </appender>
-    <root level="INFO">
-        <appender-ref ref="ASYNC_ERROR" />
-        <appender-ref ref="ASYNC_DEBUG" />
-        <appender-ref ref="ASYNC_AUDIT" />
-        <appender-ref ref="ASYNC_TRANSACTION" />
-        <if condition='property("enable-all-log").equalsIgnoreCase("true")'>
-            <then>
-                <appender-ref ref="ALL_ROLLING" />
-            </then>
-        </if>
-    </root>
-    <logger level="INFO" name="org.openecomp.sdc" />
-</configuration>
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-dcae-dt/templates/NOTES.txt
deleted file mode 100644
index 0063bb6c80..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/templates/configmap.yaml b/kubernetes/sdc/charts/sdc-dcae-dt/templates/configmap.yaml
deleted file mode 100644
index 257803fd91..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/templates/configmap.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-logging-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-dcae-dt/templates/deployment.yaml
deleted file mode 100644
index e3f1b5da1e..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/templates/deployment.yaml
+++ /dev/null
@@ -1,182 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - name: {{ include "common.name" . }}-readiness
-        command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - sdc-dcae-be
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-      - name: {{ include "common.name" . }}-job-completion
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
-        command:
-        - /app/ready.py
-        args:
-        - --job-name
-        - {{ include "common.release" . }}-sdc-dcae-be-tools
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-      - name: {{ include "common.name" . }}-update-config
-        image: "{{ .Values.global.envsubstImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        command:
-          - sh
-        args:
-          - -c
-          - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config-output/${PFILE}; chmod 0755 /config-output/${PFILE}; done"
-        env:
-          - name: KEYSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: keystore_password
-          - name: TRUSTSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: truststore_password
-        volumeMounts:
-          - name: {{ include "common.fullname" . }}-environments
-            mountPath: /config-input/
-          - name: sdc-environments-output
-            mountPath: /config-output/
-      containers:
-        - name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          {{ if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end }}
-          readinessProbe:
-            httpGet:
-              path: /dcae/healthCheckOld
-              port: {{ .Values.service.internalPort }}
-              scheme: HTTPS
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: ENVNAME
-            value: {{ .Values.global.env.name }}
-          - name: JAVA_OPTIONS
-            value: {{ .Values.config.javaOptions }}
-          - name: HOST_IP
-            valueFrom:
-              fieldRef:
-                fieldPath: status.podIP
-          volumeMounts:
-          - name: sdc-environments-output
-            mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/chef-solo/cookbooks/dcae-dt/files/default/org.onap.sdc.p12
-            subPath: org.onap.sdc.p12
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/chef-solo/cookbooks/dcae-dt/files/default/org.onap.sdc.trust.jks
-            subPath: org.onap.sdc.trust.jks
-          - name: {{ include "common.fullname" . }}-localtime
-            mountPath: /etc/localtime
-            readOnly: true
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/lib/jetty/logs
-          - name: {{ include "common.fullname" . }}-logback
-            mountPath: /tmp/logback.xml
-            subPath: logback.xml
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-
-        # side car containers
-        - name: {{ include "common.name" . }}-filebeat-onap
-          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-filebeat-conf
-            mountPath: /usr/share/filebeat/filebeat.yml
-            subPath: filebeat.yml
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          - name: {{ include "common.fullname" . }}-data-filebeat
-            mountPath: /usr/share/filebeat/data
-      volumes:
-        - name: {{ include "common.fullname" . }}-localtime
-          hostPath:
-            path: /etc/localtime
-        - name: sdc-cert
-          secret:
-            secretName: sdc-cert
-        - name: {{ include "common.fullname" . }}-filebeat-conf
-          configMap:
-            name: {{ include "common.release" . }}-sdc-filebeat-configmap
-        - name: {{ include "common.fullname" . }}-data-filebeat
-          emptyDir: {}
-        - name: {{ include "common.fullname" . }}-logback
-          configMap:
-            name : {{ include "common.fullname" . }}-logging-configmap
-        - name: {{ include "common.fullname" . }}-environments
-          configMap:
-            name: {{ include "common.release" . }}-sdc-environments-configmap
-            defaultMode: 0755
-        - name: sdc-environments-output
-          emptyDir: { medium: "Memory" }
-        - name: {{ include "common.fullname" . }}-logs
-          emptyDir: {}
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/templates/service.yaml b/kubernetes/sdc/charts/sdc-dcae-dt/templates/service.yaml
deleted file mode 100644
index 88445c1d56..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/templates/service.yaml
+++ /dev/null
@@ -1,50 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-    msb.onap.org/service-info: '[
-      {
-          "serviceName": "sdc-dcae-dt",
-          "version": "v1",
-          "url": "/dcae",
-          "protocol": "UI",
-          "port": "{{ .Values.service.internalPort }}",
-          "visualRange": "0|1"
-      }
-    ]'
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/values.yaml b/kubernetes/sdc/charts/sdc-dcae-dt/values.yaml
deleted file mode 100644
index 96ba894fbf..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-dt/values.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  readinessImage: onap/oom/readiness:3.0.1
-  loggingRepository: docker.elastic.co
-  loggingImage: beats/filebeat:5.5.0
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image: onap/dcae-dt:1.3.4
-pullPolicy: IfNotPresent
-config:
-  javaOptions: -XX:MaxPermSize=256m -Xmx1024m -Dconfig.home=config -Dlog.home=/var/lib/jetty/logs/ -Dlogging.config=config/dcae-dt/logback-spring.xml
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  enabled: false
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-service:
-  type: NodePort
-  name: sdc-dcae-dt
-  portName: dcae-dt
-  nodePort: "66"
-  internalPort: 9446
-
-ingress:
-  enabled: false
-  service:
-    - baseaddr: "dcaedt"
-      name: "sdc-dcae-dt"
-      port: 9446
-  config:
-    ssl: "redirect"
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 4Gi
-    requests:
-      cpu: 10m
-      memory: 1Gi
-  large:
-    limits:
-      cpu: 2
-      memory: 8Gi
-    requests:
-      cpu: 20m
-      memory: 2Gi
-  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/Chart.yaml b/kubernetes/sdc/charts/sdc-dcae-fe/Chart.yaml
deleted file mode 100644
index 7eb7782cac..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/Chart.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright © 2013 Amdocs, AT&T,Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP SDC DCAE UI for service monitoring and MC create and configure
-name: sdc-dcae-fe
-version: 6.0.0
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/resources/config/logging/logback.xml b/kubernetes/sdc/charts/sdc-dcae-fe/resources/config/logging/logback.xml
deleted file mode 100644
index 8dbf347dc7..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/resources/config/logging/logback.xml
+++ /dev/null
@@ -1,204 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-================================================================================
-Copyright (C) 2018 AT&T Intellectual Property
-================================================================================
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-================================================================================
--->
-<configuration scan="true" scanPeriod="3 seconds">
-    <property name="logDir" value="/var/log/onap" />
-    <property name="componentName" scope="system" value="sdc"></property>
-    <property name="subComponentName" scope="system" value="dcae-fe"></property>
-    <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
-    <property file="${config.home}/dcae-fe/configuration.yaml" />
-    <property name="enable-all-log" scope="context" value="false" />
-    <!--  log file names -->
-    <property name="errorLogName" value="error" />
-    <property name="metricsLogName" value="metrics" />
-    <property name="auditLogName" value="audit" />
-    <property name="debugLogName" value="debug" />
-    <property name="transactionLogName" value="transaction" />
-    <property name="allLogName" value="all" />
-    <property name="queueSize" value="256" />
-    <property name="maxFileSize" value="50MB" />
-    <property name="maxHistory" value="30" />
-    <property name="totalSizeCap" value="10GB" />
-    <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
-    <!-- All log -->
-    <if condition='property("enable-all-log").equalsIgnoreCase("true")'>
-        <then>
-            <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ALL_ROLLING">
-                <file>${logDirectory}/${allLogName}.log</file>
-                <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-                    <fileNamePattern>${logDirectory}/${allLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-                    <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                        <maxFileSize>${maxFileSize}</maxFileSize>
-                    </timeBasedFileNamingAndTriggeringPolicy>
-                    <maxHistory>${maxHistory}</maxHistory>
-                    <totalSizeCap>${totalSizeCap}</totalSizeCap>
-                </rollingPolicy>
-                <encoder>
-                    <pattern>${pattern}</pattern>
-                </encoder>
-            </appender>
-            <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ALL">
-                <appender-ref ref="ALL_ROLLING" />
-            </appender>
-        </then>
-    </if>
-    <!-- Error log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="ERROR_ROLLING">
-        <file>${logDirectory}/${errorLogName}.log</file>
-        <!-- Audit messages filter - deny audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>AUDIT_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- Transaction messages filter - deny Transaction messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
-        <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-            <level>INFO</level>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Debug log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="DEBUG_ROLLING">
-        <file>${logDirectory}/${debugLogName}.log</file>
-        <!-- No need to deny audit messages - they are INFO only, will be denied
-                        anyway -->
-        <!-- Transaction messages filter - deny Transaction messages, there are
-                        some DEBUG level messages among them -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>NEUTRAL</onMismatch>
-            <onMatch>DENY</onMatch>
-        </filter>
-        <!-- accept DEBUG and TRACE level -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.GEventEvaluator">
-                <expression>e.level.toInt() &lt;= DEBUG.toInt()</expression>
-            </evaluator>
-            <OnMismatch>DENY</OnMismatch>
-            <OnMatch>NEUTRAL</OnMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Audit log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="AUDIT_ROLLING">
-        <file>${logDirectory}/${auditLogName}.log</file>
-        <!-- Audit messages filter - accept audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>AUDIT_MARKER</marker>
-            </evaluator>
-            <onMismatch>DENY</onMismatch>
-            <onMatch>ACCEPT</onMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- SdncTransaction log -->
-    <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="TRANSACTION_ROLLING">
-        <file>${logDirectory}/${transactionLogName}.log</file>
-        <!-- Transaction messages filter - accept audit messages -->
-        <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
-            <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
-                <marker>TRANSACTION_MARKER</marker>
-            </evaluator>
-            <onMismatch>DENY</onMismatch>
-            <onMatch>ACCEPT</onMatch>
-        </filter>
-        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
-            <fileNamePattern>${logDirectory}/${transactionLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
-            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
-                <maxFileSize>${maxFileSize}</maxFileSize>
-            </timeBasedFileNamingAndTriggeringPolicy>
-            <maxHistory>${maxHistory}</maxHistory>
-            <totalSizeCap>${totalSizeCap}</totalSizeCap>
-        </rollingPolicy>
-        <encoder>
-            <pattern>${pattern}</pattern>
-        </encoder>
-    </appender>
-    <!-- Asynchronicity Configurations -->
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_DEBUG">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="DEBUG_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_TRANSACTION">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="TRANSACTION_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_ERROR">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="ERROR_ROLLING" />
-    </appender>
-    <appender class="ch.qos.logback.classic.AsyncAppender" name="ASYNC_AUDIT">
-        <queueSize>${queueSize}</queueSize>
-        <appender-ref ref="AUDIT_ROLLING" />
-    </appender>
-    <root level="INFO">
-        <appender-ref ref="ASYNC_ERROR" />
-        <appender-ref ref="ASYNC_DEBUG" />
-        <appender-ref ref="ASYNC_AUDIT" />
-        <appender-ref ref="ASYNC_TRANSACTION" />
-        <if condition='property("enable-all-log").equalsIgnoreCase("true")'>
-            <then>
-                <appender-ref ref="ALL_ROLLING" />
-            </then>
-        </if>
-    </root>
-    <logger level="INFO" name="org.openecomp.sdc" />
-</configuration>
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-dcae-fe/templates/NOTES.txt
deleted file mode 100644
index 0063bb6c80..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/templates/configmap.yaml b/kubernetes/sdc/charts/sdc-dcae-fe/templates/configmap.yaml
deleted file mode 100644
index 257803fd91..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/templates/configmap.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-logging-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-dcae-fe/templates/deployment.yaml
deleted file mode 100644
index 4f3f700084..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/templates/deployment.yaml
+++ /dev/null
@@ -1,186 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - name: {{ include "common.name" . }}-readiness
-        command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - sdc-dcae-be
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-      - name: {{ include "common.name" . }}-job-completion
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
-        command:
-        - /app/ready.py
-        args:
-        - --job-name
-        - {{ include "common.release" . }}-sdc-dcae-be-tools
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-      - name: {{ include "common.name" . }}-update-config
-        image: "{{ .Values.global.envsubstImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        command:
-          - sh
-        args:
-          - -c
-          - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config-output/${PFILE}; chmod 0755 /config-output/${PFILE}; done"
-        env:
-          - name: KEYSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: keystore_password
-          - name: TRUSTSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: truststore_password
-        volumeMounts:
-          - name: {{ include "common.fullname" . }}-environments
-            mountPath: /config-input/
-          - name: sdc-environments-output
-            mountPath: /config-output/
-      containers:
-        - name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          {{ if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end }}
-          readinessProbe:
-            httpGet:
-              path: /dcaed/healthCheck
-              port: {{ .Values.service.internalPort }}
-              scheme: HTTPS
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: ENVNAME
-            value: {{ .Values.global.env.name }}
-          - name: JAVA_OPTIONS
-            value: {{ .Values.config.javaOptions }}
-          - name: HOST_IP
-            valueFrom:
-              fieldRef:
-                fieldPath: status.podIP
-          volumeMounts:
-          - name: sdc-environments-output
-            mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/chef-solo/cookbooks/Deploy-DCAE/files/default/org.onap.sdc.p12
-            subPath: org.onap.sdc.p12
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/chef-solo/cookbooks/Deploy-DCAE/files/default/org.onap.sdc.trust.jks
-            subPath: org.onap.sdc.trust.jks
-          - name: {{ include "common.fullname" . }}-localtime
-            mountPath: /etc/localtime
-            readOnly: true
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/lib/jetty/logs
-          - name: {{ include "common.fullname" . }}-logback
-            mountPath: /tmp/logback.xml
-            subPath: logback.xml
-          lifecycle:
-            postStart:
-              exec:
-                command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/var/lib/jetty/config/dcae-fe/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-
-        # side car containers
-        - name: {{ include "common.name" . }}-filebeat-onap
-          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-filebeat-conf
-            mountPath: /usr/share/filebeat/filebeat.yml
-            subPath: filebeat.yml
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          - name: {{ include "common.fullname" . }}-data-filebeat
-            mountPath: /usr/share/filebeat/data
-      volumes:
-        - name: {{ include "common.fullname" . }}-localtime
-          hostPath:
-            path: /etc/localtime
-        - name: sdc-cert
-          secret:
-            secretName: sdc-cert
-        - name: {{ include "common.fullname" . }}-filebeat-conf
-          configMap:
-            name: {{ include "common.release" . }}-sdc-filebeat-configmap
-        - name: {{ include "common.fullname" . }}-data-filebeat
-          emptyDir: {}
-        - name: {{ include "common.fullname" . }}-logback
-          configMap:
-            name : {{ include "common.fullname" . }}-logging-configmap
-        - name: {{ include "common.fullname" . }}-environments
-          configMap:
-            name: {{ include "common.release" . }}-sdc-environments-configmap
-            defaultMode: 0755
-        - name: sdc-environments-output
-          emptyDir: { medium: "Memory" }
-        - name: {{ include "common.fullname" . }}-logs
-          emptyDir: {}
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/templates/service.yaml b/kubernetes/sdc/charts/sdc-dcae-fe/templates/service.yaml
deleted file mode 100644
index e1f541b6b1..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/templates/service.yaml
+++ /dev/null
@@ -1,50 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-    msb.onap.org/service-info: '[
-      {
-          "serviceName": "dcae-gui",
-          "version": "v1",
-          "url": "/dcae",
-          "protocol": "UI",
-          "port": "{{ .Values.service.internalPort }}",
-          "visualRange": "0|1"
-      }
-    ]'
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/values.yaml b/kubernetes/sdc/charts/sdc-dcae-fe/values.yaml
deleted file mode 100644
index f4a9dfb08f..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-fe/values.yaml
+++ /dev/null
@@ -1,89 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  readinessImage: onap/oom/readiness:3.0.1
-  loggingRepository: docker.elastic.co
-  loggingImage: beats/filebeat:5.5.0
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image: onap/dcae-fe:1.3.4
-pullPolicy: Always
-config:
-  javaOptions: -XX:MaxPermSize=256m -Xmx1024m -Dconfig.home=config -Dlog.home=/var/lib/jetty/logs/ -Dlogging.config=config/dcae-fe/logback-spring.xml
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: false
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-service:
-  #Example service definition with external, internal and node ports.
-  #Services may use any combination of ports depending on the 'type' of
-  #service being defined.
-  type: NodePort
-  name: sdc-dcae-fe
-  portName: dcae-fe
-  nodePort: "64"
-  internalPort: 9444
-
-ingress:
-  enabled: false
-  service:
-    - baseaddr: "dcaedt"
-      name: "sdc-dcae-fe"
-      port: 9444
-  config:
-    ssl: "redirect"
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 4Gi
-    requests:
-      cpu: 10m
-      memory: 1Gi
-  large:
-    limits:
-      cpu: 2
-      memory: 8Gi
-    requests:
-      cpu: 20m
-      memory: 2Gi
-  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/.helmignore b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/.helmignore
deleted file mode 100644
index f0c1319444..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/.helmignore
+++ /dev/null
@@ -1,21 +0,0 @@
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/Chart.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/Chart.yaml
deleted file mode 100644
index f851518a4e..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/Chart.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Tosca model for component monitoring and descriptors deployment
-name: sdc-dcae-tosca-lab
-version: 6.0.0
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt
deleted file mode 100644
index 41f9706fec..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml
deleted file mode 100644
index 0c886a0b08..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml
+++ /dev/null
@@ -1,127 +0,0 @@
-# Copyright © 2017 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - name: {{ include "common.name" . }}-readiness
-        command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - "sdc-dcae-be"
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-
-      containers:
-        - name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          - containerPort: {{ .Values.service.internalPort2 }}
-          {{ if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort2 }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end }}
-          readinessProbe:
-            httpGet:
-              path: /healthcheck
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: ENVNAME
-            value: {{ .Values.global.env.name }}
-          - name: JAVA_OPTIONS
-            value: {{ .Values.config.javaOptions }}
-          - name: HOST_IP
-            valueFrom:
-              fieldRef:
-                fieldPath: status.podIP
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-environments
-            mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: {{ include "common.fullname" . }}-localtime
-            mountPath: /etc/localtime
-            readOnly: true
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-        # side car containers
-        - name: {{ include "common.name" . }}-filebeat-onap
-          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-filebeat-conf
-            mountPath: /usr/share/filebeat/filebeat.yml
-            subPath: filebeat.yml
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          - name: {{ include "common.fullname" . }}-data-filebeat
-            mountPath: /usr/share/filebeat/data
-      volumes:
-      - name: {{ include "common.fullname" . }}-localtime
-        hostPath:
-          path: /etc/localtime
-      - name: {{ include "common.fullname" . }}-filebeat-conf
-        configMap:
-          name: {{ include "common.release" . }}-sdc-filebeat-configmap
-      - name: {{ include "common.fullname" . }}-data-filebeat
-        emptyDir: {}
-      - name: {{ include "common.fullname" . }}-environments
-        configMap:
-          name: {{ include "common.release" . }}-sdc-environments-configmap
-          defaultMode: 0755
-      - name:  {{ include "common.fullname" . }}-logs
-        emptyDir: {}
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml
deleted file mode 100644
index 04661b9ea1..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml
+++ /dev/null
@@ -1,56 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-    msb.onap.org/service-info: '[
-      {
-          "serviceName": "dcae-be",
-          "version": "v1",
-          "url": "/dcae",
-          "protocol": "REST",
-          "port": "{{ .Values.service.internalPort2 }}",
-          "visualRange": "1"
-      }
-    ]'
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}
-    - port: {{ .Values.service.internalPort2 }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.service.portName2 }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    - port: {{ .Values.service.externalPort2 }}
-      targetPort: {{ .Values.service.internalPort2 }}
-      name: {{ .Values.service.portName2 }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/values.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/values.yaml
deleted file mode 100644
index ec5dc98893..0000000000
--- a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/values.yaml
+++ /dev/null
@@ -1,89 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  readinessImage: onap/oom/readiness:3.0.1
-  loggingRepository: docker.elastic.co
-  loggingImage: beats/filebeat:5.5.0
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image: onap/dcae-tosca-app:1.3.3
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-config:
-  javaOptions: -XX:MaxPermSize=256m -Xmx1024m
-  cassandraSslEnabled: "false"
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: false
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-service:
-  type: ClusterIP
-  name: sdc-dcae-tosca-lab
-  portName: sdc-dcae-tosca-lab-8085
-  externalPort: 8085
-  internalPort: 8085
-  portName2: sdc-dcae-tosca-lab-8445
-  externalPort2: 8445
-  internalPort2: 8445
-
-ingress:
-  enabled: false
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 4Gi
-    requests:
-      cpu: 10m
-      memory: 1Gi
-  large:
-    limits:
-      cpu: 2
-      memory: 8Gi
-    requests:
-      cpu: 20m
-      memory: 2Gi
-  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-fe/resources/config/plugins/plugins-configuration.yaml b/kubernetes/sdc/charts/sdc-fe/resources/config/plugins/plugins-configuration.yaml
deleted file mode 100644
index f9a3b17e03..0000000000
--- a/kubernetes/sdc/charts/sdc-fe/resources/config/plugins/plugins-configuration.yaml
+++ /dev/null
@@ -1,28 +0,0 @@
-pluginsList:
-   - pluginId: DCAED
-     pluginDiscoveryUrl: "{{ .Values.config.plugins.dcae_discovery_url }}"
-     pluginSourceUrl: "{{ .Values.config.plugins.dcae_source_url }}"
-     pluginStateUrl: "dcaed"
-     pluginDisplayOptions:
-        context:
-            displayName: "Monitoring"
-            displayContext: ["SERVICE"]
-            displayRoles: ["DESIGNER"]
-   - pluginId: DCAE-DS
-     pluginDiscoveryUrl: "{{ .Values.config.plugins.dcae_dt_discovery_url }}"
-     pluginSourceUrl: "{{ .Values.config.plugins.dcae_dt_source_url }}"
-     pluginStateUrl: "dcae-ds"
-     pluginDisplayOptions:
-       tab:
-           displayName: "DCAE-DS"
-           displayRoles: ["DESIGNER"]
-   - pluginId: WORKFLOW
-     pluginDiscoveryUrl: "{{ .Values.config.plugins.workflow_discovery_url }}"
-     pluginSourceUrl: "{{ .Values.config.plugins.workflow_source_url }}"
-     pluginStateUrl: "workflowDesigner"
-     pluginDisplayOptions:
-        tab:
-            displayName: "WORKFLOW"
-            displayRoles: ["DESIGNER", "TESTER"]
-
-connectionTimeout: 1000
-\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/pv.yaml b/kubernetes/sdc/charts/sdc-onboarding-be/templates/pv.yaml
deleted file mode 100644
index bc110c3b0f..0000000000
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/pv.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-{{/*
-# ================================================================================
-# Copyright (C) 2019, Nordix Foundation. All rights reserved.
-# ================================================================================
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.cert.persistence.existingClaim) -}}
-{{- if eq "True" (include "common.needPV" .) -}}
-kind: PersistentVolume
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-    name: {{ include "common.fullname" . }}
-spec:
-  capacity:
-    storage: {{ .Values.cert.persistence.size}}
-  accessModes:
-    - {{ .Values.cert.persistence.accessMode }}
-  persistentVolumeReclaimPolicy: {{ .Values.cert.persistence.volumeReclaimPolicy }}
-  storageClassName: "{{ include "common.fullname" . }}-data"
-  hostPath:
-    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.cert.persistence.mountSubPath }}
-{{- end -}}
-{{- end -}}
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/pvc.yaml b/kubernetes/sdc/charts/sdc-onboarding-be/templates/pvc.yaml
deleted file mode 100644
index 006d736b63..0000000000
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/pvc.yaml
+++ /dev/null
@@ -1,40 +0,0 @@
-{{/*
-# ================================================================================
-# Copyright (C) 2019, Nordix Foundation. All rights reserved.
-# ================================================================================
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.cert.persistence.enabled (not .Values.cert.persistence.existingClaim) -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}-cert
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-{{- if .Values.cert.persistence.annotations }}
-  annotations:
-{{ toYaml .Values.cert.persistence.annotations | indent 4 }}
-{{- end }}
-spec:
-  accessModes:
-    - {{ .Values.cert.persistence.accessMode }}
-  storageClassName: {{ include "common.storageClass" . }}
-  resources:
-    requests:
-      storage: {{ .Values.cert.persistence.size }}
-{{- end -}}
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/.helmignore b/kubernetes/sdc/charts/sdc-wfd-be/.helmignore
deleted file mode 100644
index f0c1319444..0000000000
--- a/kubernetes/sdc/charts/sdc-wfd-be/.helmignore
+++ /dev/null
@@ -1,21 +0,0 @@
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/ingress.yaml b/kubernetes/sdc/charts/sdc-wfd-be/templates/ingress.yaml
deleted file mode 100644
index 8f87c68f1e..0000000000
--- a/kubernetes/sdc/charts/sdc-wfd-be/templates/ingress.yaml
+++ /dev/null
@@ -1 +0,0 @@
-{{ include "common.ingress" . }}
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/.helmignore b/kubernetes/sdc/charts/sdc-wfd-fe/.helmignore
deleted file mode 100644
index f0c1319444..0000000000
--- a/kubernetes/sdc/charts/sdc-wfd-fe/.helmignore
+++ /dev/null
@@ -1,21 +0,0 @@
-# Patterns to ignore when building packages.
-# This supports shell glob matching, relative path matching, and
-# negation (prefixed with !). Only one pattern per line.
-.DS_Store
-# Common VCS dirs
-.git/
-.gitignore
-.bzr/
-.bzrignore
-.hg/
-.hgignore
-.svn/
-# Common backup files
-*.swp
-*.bak
-*.tmp
-*~
-# Various IDEs
-.project
-.idea/
-*.tmproj
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/templates/ingress.yaml b/kubernetes/sdc/charts/sdc-wfd-fe/templates/ingress.yaml
deleted file mode 100644
index 8f87c68f1e..0000000000
--- a/kubernetes/sdc/charts/sdc-wfd-fe/templates/ingress.yaml
+++ /dev/null
@@ -1 +0,0 @@
-{{ include "common.ingress" . }}
diff --git a/kubernetes/sdc/components/Makefile b/kubernetes/sdc/components/Makefile
new file mode 100644
index 0000000000..0d5b9e0c1f
--- /dev/null
+++ b/kubernetes/sdc/components/Makefile
@@ -0,0 +1,55 @@
+# Copyright © 2020 Samsung Electronics, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
+OUTPUT_DIR := $(ROOT_DIR)/../../dist
+PACKAGE_DIR := $(OUTPUT_DIR)/packages
+SECRET_DIR := $(OUTPUT_DIR)/secrets
+
+EXCLUDES :=
+HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
+HELM_VER := $(shell helm version --template "{{.Version}}")
+
+.PHONY: $(EXCLUDES) $(HELM_CHARTS)
+
+all: $(HELM_CHARTS)
+
+$(HELM_CHARTS):
+	@echo "\n[$@]"
+	@make package-$@
+
+make-%:
+	@if [ -f $*/Makefile ]; then make -C $*; fi
+
+dep-%: make-%
+	@if [ -f $*/requirements.yaml ]; then helm dep up $*; fi
+
+lint-%: dep-%
+	@if [ -f $*/Chart.yaml ]; then helm lint $*; fi
+
+package-%: lint-%
+	@mkdir -p $(PACKAGE_DIR)
+ifeq "$(findstring v3,$(HELM_VER))" "v3"
+	@if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$(helm package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && helm push -f $$PACKAGE_NAME local; fi
+else
+	@if [ -f $*/Chart.yaml ]; then helm package -d $(PACKAGE_DIR) $*; fi
+endif
+	@helm repo index $(PACKAGE_DIR)
+
+clean:
+	@rm -f */requirements.lock
+	@rm -f *tgz */charts/*tgz
+	@rm -rf $(PACKAGE_DIR)
+%:
+	@:
diff --git a/kubernetes/sdc/charts/sdc-be/.helmignore b/kubernetes/sdc/components/sdc-be/.helmignore
index daebc7da77..daebc7da77 100644
--- a/kubernetes/sdc/charts/sdc-be/.helmignore
+++ b/kubernetes/sdc/components/sdc-be/.helmignore
diff --git a/kubernetes/sdc/charts/sdc-be/Chart.yaml b/kubernetes/sdc/components/sdc-be/Chart.yaml
index 3189bebf01..3189bebf01 100644
--- a/kubernetes/sdc/charts/sdc-be/Chart.yaml
+++ b/kubernetes/sdc/components/sdc-be/Chart.yaml
diff --git a/kubernetes/sdc/components/sdc-be/requirements.yaml b/kubernetes/sdc/components/sdc-be/requirements.yaml
new file mode 100644
index 0000000000..b1d52ae32a
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-be/requirements.yaml
@@ -0,0 +1,23 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#   Modifications Copyright © 2020 AT&T. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+dependencies:
+  - name: certInitializer
+    version: ~6.x-0
+    repository: '@local'
+\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-be/resources/config/logging/logback.xml b/kubernetes/sdc/components/sdc-be/resources/config/logging/logback.xml
index 0f044d7646..0f044d7646 100644
--- a/kubernetes/sdc/charts/sdc-be/resources/config/logging/logback.xml
+++ b/kubernetes/sdc/components/sdc-be/resources/config/logging/logback.xml
diff --git a/kubernetes/sdc/charts/sdc-be/templates/NOTES.txt b/kubernetes/sdc/components/sdc-be/templates/NOTES.txt
index 3a5553b84f..3a5553b84f 100644
--- a/kubernetes/sdc/charts/sdc-be/templates/NOTES.txt
+++ b/kubernetes/sdc/components/sdc-be/templates/NOTES.txt
diff --git a/kubernetes/sdc/charts/sdc-be/templates/configmap.yaml b/kubernetes/sdc/components/sdc-be/templates/configmap.yaml
index ea5009914a..ea5009914a 100644
--- a/kubernetes/sdc/charts/sdc-be/templates/configmap.yaml
+++ b/kubernetes/sdc/components/sdc-be/templates/configmap.yaml
diff --git a/kubernetes/sdc/charts/sdc-be/templates/deployment.yaml b/kubernetes/sdc/components/sdc-be/templates/deployment.yaml
index 78f2912021..e2329d7ca5 100644
--- a/kubernetes/sdc/charts/sdc-be/templates/deployment.yaml
+++ b/kubernetes/sdc/components/sdc-be/templates/deployment.yaml
@@ -22,7 +22,7 @@ spec:
   template:
     metadata: {{- include "common.templateMetadata" . | nindent 6 }}
     spec:
-      initContainers:
+      initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
       - name: {{ include "common.name" . }}-readiness
         command:
         - /app/ready.py
@@ -51,34 +51,46 @@ spec:
             fieldRef:
               apiVersion: v1
               fieldPath: metadata.namespace
+      {{- if .Values.global.aafEnabled }}
       - name: {{ include "common.name" . }}-update-config
         image: "{{ .Values.global.envsubstImage }}"
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
         command:
         - sh
         args:
-        - -c
-        - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config-output/${PFILE}; chmod 0755 /config-output/${PFILE}; done"
-        env:
-        - name: KEYSTORE_PASS
-          valueFrom:
-            secretKeyRef:
-              name: {{ include "common.release" . }}-sdc-cs-secrets
-              key: keystore_password
-        - name: TRUSTSTORE_PASS
-          valueFrom:
-            secretKeyRef:
-              name: {{ include "common.release" . }}-sdc-cs-secrets
-              key: truststore_password
-        volumeMounts:
+        - "-c"
+        - |
+          export $(grep '^c' {{ .Values.certInitializer.credsPath }}/mycreds.prop | xargs -0)
+          export KEYSTORE_PASS=$cadi_keystore_password_p12
+          export KEYMANAGER_PASS=$cadi_keystore_password_p12
+          export TRUSTSTORE_PASS=$cadi_truststore_password
+          cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keystoreFile }} /config-output
+          cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.truststoreFile }} /config-output
+          cd /config-input && \
+          for PFILE in `find . -not -type d | grep -v -F ..`
+          do
+            envsubst <${PFILE} >/config-output/${PFILE}
+            chmod 0755 /config-output/${PFILE}
+          done
+        volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 8 }}
         - name: {{ include "common.fullname" . }}-environments
           mountPath: /config-input/
         - name: sdc-environments-output
           mountPath: /config-output/
+      {{- end }}
       containers:
         - name: {{ include "common.name" . }}
           image: "{{ include "common.repository" . }}/{{ .Values.image }}"
           imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          {{- if .Values.global.aafEnabled }}
+          command:
+          - sh
+          args:
+          - "-c"
+          - |
+            sed -i '/trustStorePassword/d' ${JETTY_BASE}/startup.sh
+            ${JETTY_BASE}/startup.sh
+          {{- end }}
           ports: {{ include "common.containerPorts" . | nindent 10  }}
           {{ if eq .Values.liveness.enabled true }}
           livenessProbe:
@@ -100,7 +112,7 @@ spec:
           resources: {{ include "common.resources" . | nindent 12 }}
           env:
           - name: ENVNAME
-            value: {{ .Values.global.env.name }}
+            value: {{ .Values.env.name }}
           - name: JAVA_OPTIONS
             value: {{ .Values.config.javaOptions }}
           - name: cassandra_ssl_enabled
@@ -112,10 +124,10 @@ spec:
           volumeMounts:
           - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: sdc-cert
+          - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/cookbooks/sdc-catalog-be/files/default/org.onap.sdc.p12
             subPath: org.onap.sdc.p12
-          - name: sdc-cert
+          - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/cookbooks/sdc-catalog-be/files/default/org.onap.sdc.trust.jks
             subPath: org.onap.sdc.trust.jks
           - name: {{ include "common.fullname" . }}-localtime
@@ -142,13 +154,10 @@ spec:
             mountPath: /var/log/onap
           - name: {{ include "common.fullname" . }}-data-filebeat
             mountPath: /usr/share/filebeat/data
-      volumes:
+      volumes: {{ include "common.certInitializer.volumes" . | nindent 6 }}
       - name: {{ include "common.fullname" . }}-localtime
         hostPath:
           path: /etc/localtime
-      - name: sdc-cert
-        secret:
-          secretName: sdc-cert
       - name: {{ include "common.fullname" . }}-filebeat-conf
         configMap:
           name: {{ include "common.release" . }}-sdc-filebeat-configmap
diff --git a/kubernetes/sdc/charts/sdc-be/templates/ingress.yaml b/kubernetes/sdc/components/sdc-be/templates/ingress.yaml
index 8f87c68f1e..8f87c68f1e 100644
--- a/kubernetes/sdc/charts/sdc-be/templates/ingress.yaml
+++ b/kubernetes/sdc/components/sdc-be/templates/ingress.yaml
diff --git a/kubernetes/sdc/charts/sdc-be/templates/job.yaml b/kubernetes/sdc/components/sdc-be/templates/job.yaml
index 8a5f2fae18..f1bdabb59c 100644
--- a/kubernetes/sdc/charts/sdc-be/templates/job.yaml
+++ b/kubernetes/sdc/components/sdc-be/templates/job.yaml
@@ -51,12 +51,12 @@ spec:
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
         volumeMounts:
         - name: {{ include "common.fullname" . }}-environments
-          mountPath: /home/sdc/chef-solo/environments/
+          mountPath: /home/onap/chef-solo/environments/
         - name: sdc-logs
           mountPath: /var/lib/jetty/logs
         env:
         - name: ENVNAME
-          value: {{ .Values.global.env.name }}
+          value: {{ .Values.env.name }}
         - name: HOST_IP
           valueFrom:
             fieldRef:
diff --git a/kubernetes/sdc/charts/sdc-be/templates/service.yaml b/kubernetes/sdc/components/sdc-be/templates/service.yaml
index a0d0f5b438..a0d0f5b438 100644
--- a/kubernetes/sdc/charts/sdc-be/templates/service.yaml
+++ b/kubernetes/sdc/components/sdc-be/templates/service.yaml
diff --git a/kubernetes/sdc/charts/sdc-be/values.yaml b/kubernetes/sdc/components/sdc-be/values.yaml
index a2f1f0c93c..c71bb755eb 100644
--- a/kubernetes/sdc/charts/sdc-be/values.yaml
+++ b/kubernetes/sdc/components/sdc-be/values.yaml
@@ -21,19 +21,58 @@ global:
   readinessImage: onap/oom/readiness:3.0.1
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
+  aafEnabled: true
+  cassandra:
+    #This flag allows SDC to instantiate its own cluster, serviceName
+    #should be sdc-cs if this flag is enabled
+    localCluster: false
+    #The cassandra service name to connect to (default: shared cassandra service)
+    serviceName: cassandra
+    #Shared cassandra cluster replicaCount, should be changed if localCluster is enabled
+    #to match with its own cluster replica
+    replicaCount: 3
+    clusterName: cassandra
+    dataCenter: Pod
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/sdc-backend:1.6.7
-backendInitImage: onap/sdc-backend-init:1.6.7
+image: onap/sdc-backend-all-plugins:1.7.1
+backendInitImage: onap/sdc-backend-init:1.7.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
 debugEnabled: false
 
+#environment file
+env:
+  name: AUTO
+
+certInitializer:
+  nameOverride: sdc-be-cert-init
+  aafDeployFqi: deployer@people.osaaf.org
+  aafDeployPass: demo123456!
+  fqdn: sdc
+  fqi: sdc@sdc.onap.org
+  public_fqdn: sdc.onap.org
+  cadi_longitude: "0.0"
+  cadi_latitude: "0.0"
+  app_ns: org.osaaf.aaf
+  credsPath: /opt/app/osaaf/local
+  addconfig: true
+  keystoreFile: "org.onap.sdc.p12"
+  truststoreFile: "org.onap.sdc.trust.jks"
+  permission_user: 352070
+  permission_group: 35953
+  aaf_add_config: >
+    /opt/app/aaf_config/bin/agent.sh local showpass
+    {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+
+#################################################################
+# SDC Config part
+#################################################################
 config:
   javaOptions: "-Xmx1536m -Xms1536m"
   cassandraSslEnabled: "false"
diff --git a/kubernetes/sdc/charts/sdc-cs/.helmignore b/kubernetes/sdc/components/sdc-cs/.helmignore
index daebc7da77..daebc7da77 100644
--- a/kubernetes/sdc/charts/sdc-cs/.helmignore
+++ b/kubernetes/sdc/components/sdc-cs/.helmignore
diff --git a/kubernetes/sdc/charts/sdc-cs/Chart.yaml b/kubernetes/sdc/components/sdc-cs/Chart.yaml
index 973ca4512e..973ca4512e 100644
--- a/kubernetes/sdc/charts/sdc-cs/Chart.yaml
+++ b/kubernetes/sdc/components/sdc-cs/Chart.yaml
diff --git a/kubernetes/sdc/components/sdc-cs/requirements.yaml b/kubernetes/sdc/components/sdc-cs/requirements.yaml
new file mode 100644
index 0000000000..5969143629
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-cs/requirements.yaml
@@ -0,0 +1,23 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#   Modifications Copyright © 2020 AT&T. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+dependencies:
+  - name: common
+    version: ~6.x-0
+    repository: '@local'
+\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-cs/templates/NOTES.txt b/kubernetes/sdc/components/sdc-cs/templates/NOTES.txt
index 3a5553b84f..3a5553b84f 100644
--- a/kubernetes/sdc/charts/sdc-cs/templates/NOTES.txt
+++ b/kubernetes/sdc/components/sdc-cs/templates/NOTES.txt
diff --git a/kubernetes/sdc/charts/sdc-cs/templates/job.yaml b/kubernetes/sdc/components/sdc-cs/templates/job.yaml
index ff32a87588..0c98d67be4 100644
--- a/kubernetes/sdc/charts/sdc-cs/templates/job.yaml
+++ b/kubernetes/sdc/components/sdc-cs/templates/job.yaml
@@ -62,7 +62,7 @@ spec:
           mountPath: /home/sdc/chef-solo/cache
         env:
         - name: ENVNAME
-          value: {{ .Values.global.env.name }}
+          value: {{ .Values.env.name }}
         - name: RELEASE
           value: {{ .Values.config.release }}
         - name: SDC_USER
diff --git a/kubernetes/sdc/charts/sdc-cs/values.yaml b/kubernetes/sdc/components/sdc-cs/values.yaml
index 5cf3065a09..4cf6e4d5f3 100644
--- a/kubernetes/sdc/charts/sdc-cs/values.yaml
+++ b/kubernetes/sdc/components/sdc-cs/values.yaml
@@ -21,14 +21,25 @@ global:
   readinessImage: onap/oom/readiness:3.0.1
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
+  cassandra:
+    #This flag allows SDC to instantiate its own cluster, serviceName
+    #should be sdc-cs if this flag is enabled
+    localCluster: false
+    #The cassandra service name to connect to (default: shared cassandra service)
+    serviceName: cassandra
+    #Shared cassandra cluster replicaCount, should be changed if localCluster is enabled
+    #to match with its own cluster replica
+    replicaCount: 3
+    clusterName: cassandra
+    dataCenter: Pod
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/sdc-cassandra:1.6.7
-cassandraInitImage: onap/sdc-cassandra-init:1.6.7
+image: onap/sdc-cassandra:1.7.1
+cassandraInitImage: onap/sdc-cassandra-init:1.7.1
 
 pullPolicy: Always
 
@@ -37,6 +48,10 @@ config:
   maxHeapSize: "1536M"
   heapNewSize: "512M"
 
+#environment file
+env:
+  name: AUTO
+
 # default number of instances
 replicaCount: 1
 
diff --git a/kubernetes/sdc/charts/sdc-fe/.helmignore b/kubernetes/sdc/components/sdc-fe/.helmignore
index daebc7da77..daebc7da77 100644
--- a/kubernetes/sdc/charts/sdc-fe/.helmignore
+++ b/kubernetes/sdc/components/sdc-fe/.helmignore
diff --git a/kubernetes/sdc/charts/sdc-fe/Chart.yaml b/kubernetes/sdc/components/sdc-fe/Chart.yaml
index 4794092b6c..4794092b6c 100644
--- a/kubernetes/sdc/charts/sdc-fe/Chart.yaml
+++ b/kubernetes/sdc/components/sdc-fe/Chart.yaml
diff --git a/kubernetes/sdc/components/sdc-fe/requirements.yaml b/kubernetes/sdc/components/sdc-fe/requirements.yaml
new file mode 100644
index 0000000000..b1d52ae32a
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-fe/requirements.yaml
@@ -0,0 +1,23 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#   Modifications Copyright © 2020 AT&T. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+dependencies:
+  - name: certInitializer
+    version: ~6.x-0
+    repository: '@local'
+\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-fe/resources/config/logging/logback.xml b/kubernetes/sdc/components/sdc-fe/resources/config/logging/logback.xml
index 1000982b6e..1000982b6e 100644
--- a/kubernetes/sdc/charts/sdc-fe/resources/config/logging/logback.xml
+++ b/kubernetes/sdc/components/sdc-fe/resources/config/logging/logback.xml
diff --git a/kubernetes/sdc/components/sdc-fe/resources/config/plugins/plugins-configuration.yaml b/kubernetes/sdc/components/sdc-fe/resources/config/plugins/plugins-configuration.yaml
new file mode 100644
index 0000000000..9dc317b2b5
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-fe/resources/config/plugins/plugins-configuration.yaml
@@ -0,0 +1,11 @@
+pluginsList:
+   - pluginId: WORKFLOW
+     pluginDiscoveryUrl: "{{ .Values.config.plugins.workflow_discovery_url }}"
+     pluginSourceUrl: "{{ .Values.config.plugins.workflow_source_url }}"
+     pluginStateUrl: "workflowDesigner"
+     pluginDisplayOptions:
+        tab:
+            displayName: "WORKFLOW"
+            displayRoles: ["DESIGNER", "TESTER"]
+
+connectionTimeout: 1000
+\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-fe/templates/NOTES.txt b/kubernetes/sdc/components/sdc-fe/templates/NOTES.txt
index 6319bfb6a3..6319bfb6a3 100644
--- a/kubernetes/sdc/charts/sdc-fe/templates/NOTES.txt
+++ b/kubernetes/sdc/components/sdc-fe/templates/NOTES.txt
diff --git a/kubernetes/sdc/charts/sdc-fe/templates/configmap.yaml b/kubernetes/sdc/components/sdc-fe/templates/configmap.yaml
index ba24fd705b..ba24fd705b 100644
--- a/kubernetes/sdc/charts/sdc-fe/templates/configmap.yaml
+++ b/kubernetes/sdc/components/sdc-fe/templates/configmap.yaml
diff --git a/kubernetes/sdc/charts/sdc-fe/templates/deployment.yaml b/kubernetes/sdc/components/sdc-fe/templates/deployment.yaml
index 8b3d4e7e44..0571f4bb5d 100644
--- a/kubernetes/sdc/charts/sdc-fe/templates/deployment.yaml
+++ b/kubernetes/sdc/components/sdc-fe/templates/deployment.yaml
@@ -34,7 +34,7 @@ spec:
         app: {{ include "common.name" . }}
         release: {{ include "common.release" . }}
     spec:
-      initContainers:
+      initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
       - name: {{ include "common.name" . }}-job-completion
         image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
         imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
@@ -49,34 +49,46 @@ spec:
             fieldRef:
               apiVersion: v1
               fieldPath: metadata.namespace
+      {{- if .Values.global.aafEnabled }}
       - name: {{ include "common.name" . }}-update-config
         image: "{{ .Values.global.envsubstImage }}"
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
         command:
-          - sh
+        - sh
         args:
-          - -c
-          - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config-output/${PFILE}; chmod 0755 /config-output/${PFILE}; done"
-        env:
-          - name: KEYSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: keystore_password
-          - name: TRUSTSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: truststore_password
-        volumeMounts:
+        - "-c"
+        - |
+          export $(grep '^c' {{ .Values.certInitializer.credsPath }}/mycreds.prop | xargs -0)
+          export KEYSTORE_PASS=$cadi_keystore_password_p12
+          export KEYMANAGER_PASS=$cadi_keystore_password_p12
+          export TRUSTSTORE_PASS=$cadi_truststore_password
+          cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keystoreFile }} /config-output
+          cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.truststoreFile }} /config-output
+          cd /config-input && \
+          for PFILE in `find . -not -type d | grep -v -F ..`
+          do
+            envsubst <${PFILE} >/config-output/${PFILE}
+            chmod 0755 /config-output/${PFILE}
+          done
+        volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
           - name: {{ include "common.fullname" . }}-environments
             mountPath: /config-input/
           - name: sdc-environments-output
             mountPath: /config-output/
+      {{- end }}
       containers:
         - name: {{ include "common.name" . }}
           image: "{{ include "common.repository" . }}/{{ .Values.image }}"
           imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          {{- if .Values.global.aafEnabled }}
+          command:
+          - sh
+          args:
+          - "-c"
+          - |
+            sed -i '/trustStorePassword/d' ${JETTY_BASE}/startup.sh
+            ${JETTY_BASE}/startup.sh
+          {{- end }}
           ports:
           - containerPort: {{ .Values.service.internalPort }}
           - containerPort: {{ .Values.service.internalPort2 }}
@@ -98,7 +110,7 @@ spec:
 {{ include "common.resources" . | indent 12 }}
           env:
           - name: ENVNAME
-            value: {{ .Values.global.env.name }}
+            value: {{ .Values.env.name }}
           - name: HOST_IP
             valueFrom:
               fieldRef:
@@ -108,10 +120,10 @@ spec:
           volumeMounts:
           - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: sdc-cert
+          - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/cookbooks/sdc-catalog-fe/files/default/org.onap.sdc.p12
             subPath: org.onap.sdc.p12
-          - name: sdc-cert
+          - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/cookbooks/sdc-catalog-fe/files/default/org.onap.sdc.trust.jks
             subPath: org.onap.sdc.trust.jks
           - name: {{ include "common.fullname" . }}-localtime
@@ -141,13 +153,10 @@ spec:
             mountPath: /var/log/onap
           - name: {{ include "common.fullname" . }}-data-filebeat
             mountPath: /usr/share/filebeat/data
-      volumes:
+      volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
         - name: {{ include "common.fullname" . }}-localtime
           hostPath:
             path: /etc/localtime
-        - name: sdc-cert
-          secret:
-            secretName: sdc-cert
         - name: {{ include "common.fullname" . }}-filebeat-conf
           configMap:
             name: {{ include "common.release" . }}-sdc-filebeat-configmap
diff --git a/kubernetes/sdc/charts/sdc-dcae-dt/templates/ingress.yaml b/kubernetes/sdc/components/sdc-fe/templates/ingress.yaml
index 8f87c68f1e..8f87c68f1e 100644
--- a/kubernetes/sdc/charts/sdc-dcae-dt/templates/ingress.yaml
+++ b/kubernetes/sdc/components/sdc-fe/templates/ingress.yaml
diff --git a/kubernetes/sdc/charts/sdc-fe/templates/service.yaml b/kubernetes/sdc/components/sdc-fe/templates/service.yaml
index 2133990b60..efcde572a3 100644
--- a/kubernetes/sdc/charts/sdc-fe/templates/service.yaml
+++ b/kubernetes/sdc/components/sdc-fe/templates/service.yaml
@@ -37,7 +37,7 @@ metadata:
 spec:
   type: {{ .Values.service.type }}
   ports:
-    {{ if not .Values.global.security.disableHttp }}
+    {{ if not .Values.security.disableHttp }}
     # setting http port only if enabled
     {{if eq .Values.service.type "NodePort" -}}
     - port: {{ .Values.service.internalPort }}
diff --git a/kubernetes/sdc/charts/sdc-fe/values.yaml b/kubernetes/sdc/components/sdc-fe/values.yaml
index 63c8ce7e72..6501698388 100644
--- a/kubernetes/sdc/charts/sdc-fe/values.yaml
+++ b/kubernetes/sdc/components/sdc-fe/values.yaml
@@ -21,13 +21,37 @@ global:
   readinessImage: onap/oom/readiness:3.0.1
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
+  aafEnabled: true
+
+#################################################################
+# AAF Part
+#################################################################
+certInitializer:
+  nameOverride: sdc-fe-cert-init
+  aafDeployFqi: deployer@people.osaaf.org
+  aafDeployPass: demo123456!
+  fqdn: sdc
+  fqi: sdc@sdc.onap.org
+  public_fqdn: sdc.onap.org
+  cadi_longitude: "0.0"
+  cadi_latitude: "0.0"
+  app_ns: org.osaaf.aaf
+  credsPath: /opt/app/osaaf/local
+  addconfig: true
+  keystoreFile: "org.onap.sdc.p12"
+  truststoreFile: "org.onap.sdc.trust.jks"
+  permission_user: 352070
+  permission_group: 35953
+  aaf_add_config: >
+    /opt/app/aaf_config/bin/agent.sh local showpass
+    {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/sdc-frontend:1.6.7
+image: onap/sdc-frontend:1.7.1
 pullPolicy: Always
 
 config:
@@ -40,6 +64,13 @@ config:
     workflow_discovery_url: "https://sdc-wfd-fe:8443/workflows"
     workflow_source_url: "https://sdc.workflow.plugin.simpledemo.onap.org:30256/workflows/"
 
+#environment file
+env:
+  name: AUTO
+
+security:
+  disableHttp: true
+
 # default number of instances
 replicaCount: 1
 
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/.helmignore b/kubernetes/sdc/components/sdc-onboarding-be/.helmignore
index daebc7da77..daebc7da77 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/.helmignore
+++ b/kubernetes/sdc/components/sdc-onboarding-be/.helmignore
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/Chart.yaml b/kubernetes/sdc/components/sdc-onboarding-be/Chart.yaml
index dadcc730d0..dadcc730d0 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/Chart.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/Chart.yaml
diff --git a/kubernetes/sdc/components/sdc-onboarding-be/requirements.yaml b/kubernetes/sdc/components/sdc-onboarding-be/requirements.yaml
new file mode 100644
index 0000000000..aad984e8d9
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-onboarding-be/requirements.yaml
@@ -0,0 +1,23 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#   Modifications Copyright © 2020 AT&T. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+dependencies:
+  - name: certInitializer
+    version: ~6.x-0
+    repository: '@local'
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/resources/config/logging/logback.xml b/kubernetes/sdc/components/sdc-onboarding-be/resources/config/logging/logback.xml
index 515076fe30..515076fe30 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/resources/config/logging/logback.xml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/resources/config/logging/logback.xml
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/NOTES.txt b/kubernetes/sdc/components/sdc-onboarding-be/templates/NOTES.txt
index edfb08642a..edfb08642a 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/NOTES.txt
+++ b/kubernetes/sdc/components/sdc-onboarding-be/templates/NOTES.txt
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/configmap.yaml b/kubernetes/sdc/components/sdc-onboarding-be/templates/configmap.yaml
index ea5009914a..ea5009914a 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/configmap.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/templates/configmap.yaml
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/deployment.yaml b/kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml
index f2baa1fd90..6f1e2a9b61 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/deployment.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml
@@ -34,7 +34,7 @@ spec:
         app: {{ include "common.name" . }}
         release: {{ include "common.release" . }}
     spec:
-      initContainers:
+      initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
       - name: {{ include "common.name" . }}-job-completion
         image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
         imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}"
@@ -49,43 +49,33 @@ spec:
             fieldRef:
               apiVersion: v1
               fieldPath: metadata.namespace
+      {{- if .Values.global.aafEnabled }}
       - name: {{ include "common.name" . }}-update-config
         image: "{{ .Values.global.envsubstImage }}"
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
         command:
-          - sh
+        - sh
         args:
-          - -c
-          - "cd /config-input && for PFILE in `find . -not -type d | grep -v -F ..`; do envsubst <${PFILE} >/config-output/${PFILE}; chmod 0755 /config-output/${PFILE}; done"
-        env:
-          - name: KEYSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: keystore_password
-          - name: TRUSTSTORE_PASS
-            valueFrom:
-              secretKeyRef:
-                name: {{ include "common.release" . }}-sdc-cs-secrets
-                key: truststore_password
-        volumeMounts:
+        - "-c"
+        - |
+          export $(grep '^c' {{ .Values.certInitializer.credsPath }}/mycreds.prop | xargs -0)
+          export KEYSTORE_PASS=$cadi_keystore_password_p12
+          export KEYMANAGER_PASS=$cadi_keystore_password_p12
+          export TRUSTSTORE_PASS=$cadi_truststore_password
+          cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keystoreFile }} /config-output
+          cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.truststoreFile }} /config-output
+          cd /config-input && \
+          for PFILE in `find . -not -type d | grep -v -F ..`
+          do
+            envsubst <${PFILE} >/config-output/${PFILE}
+            chmod 0755 /config-output/${PFILE}
+          done
+        volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
           - name: {{ include "common.fullname" . }}-environments
             mountPath: /config-input/
           - name: sdc-environments-output
             mountPath: /config-output/
-      - name: volume-permissions
-        image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.global.busyboxImage | default .Values.busyboxImage }}
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        command:
-          - /bin/sh
-          - -c
-          - |
-            chown -R {{ .Values.securityContext.runAsUser }}:{{ .Values.securityContext.fsGroup }} //onboard/cert
-        securityContext:
-          runAsUser: 0
-        volumeMounts:
-          - name: {{ include "common.fullname" . }}-cert-storage
-            mountPath: "/onboard/cert"
+      {{- end }}
       containers:
         - name: {{ include "common.name" . }}
           image: "{{ include "common.repository" . }}/{{ .Values.image }}"
@@ -113,11 +103,11 @@ spec:
 {{ include "common.resources" . | indent 12 }}
           env:
           - name: ENVNAME
-            value: {{ .Values.global.env.name }}
+            value: {{ .Values.env.name }}
           - name: JAVA_OPTIONS
             value: {{ .Values.config.javaOptions }}
           - name: SDC_CLUSTER_NAME
-            value: "SDC-CS-{{ .Values.global.env.name }}"
+            value: "SDC-CS-{{ .Values.env.name }}"
           - name: cassandra_ssl_enabled
             value: {{ .Values.config.cassandraSslEnabled | quote }}
           - name: HOST_IP
@@ -135,10 +125,10 @@ spec:
           volumeMounts:
           - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/environments/
-          - name: sdc-cert
+          - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/cookbooks/sdc-onboard-backend/files/default/org.onap.sdc.p12
             subPath: org.onap.sdc.p12
-          - name: sdc-cert
+          - name: sdc-environments-output
             mountPath: /var/lib/jetty/chef-solo/cookbooks/sdc-onboard-backend/files/default/org.onap.sdc.trust.jks
             subPath: org.onap.sdc.trust.jks
           - name: {{ include "common.fullname" . }}-localtime
@@ -149,8 +139,6 @@ spec:
           - name: {{ include "common.fullname" . }}-logback
             mountPath: /tmp/logback.xml
             subPath: logback.xml
-          - name: {{ include "common.fullname" . }}-cert-storage
-            mountPath: "{{ .Values.cert.certDir }}"
           lifecycle:
             postStart:
               exec:
@@ -167,13 +155,10 @@ spec:
             mountPath: /var/log/onap
           - name: {{ include "common.fullname" . }}-data-filebeat
             mountPath: /usr/share/filebeat/data
-      volumes:
+      volumes: {{ include "common.certInitializer.volumes" . | nindent 6 }}
       - name: {{ include "common.fullname" . }}-localtime
         hostPath:
           path: /etc/localtime
-      - name: sdc-cert
-        secret:
-          secretName: sdc-cert
       - name: {{ include "common.fullname" . }}-filebeat-conf
         configMap:
           name: {{ include "common.release" . }}-sdc-filebeat-configmap
@@ -190,8 +175,5 @@ spec:
         emptyDir: { medium: "Memory" }
       - name:  {{ include "common.fullname" . }}-logs
         emptyDir: {}
-      - name:  {{ include "common.fullname" . }}-cert-storage
-        persistentVolumeClaim:
-          claimName: {{ include "common.fullname" . }}-cert
       imagePullSecrets:
       - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/job.yaml b/kubernetes/sdc/components/sdc-onboarding-be/templates/job.yaml
index 39758bc943..936c7c41b5 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/job.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/templates/job.yaml
@@ -56,7 +56,7 @@ spec:
           mountPath: /home/sdc/chef-solo/environments/
         env:
         - name: ENVNAME
-          value: {{ .Values.global.env.name }}
+          value: {{ .Values.env.name }}
         - name: HOST_IP
           valueFrom:
             fieldRef:
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/templates/service.yaml b/kubernetes/sdc/components/sdc-onboarding-be/templates/service.yaml
index ad6650aa86..ad6650aa86 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/templates/service.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/templates/service.yaml
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml b/kubernetes/sdc/components/sdc-onboarding-be/values.yaml
index f42b500376..ff10a64b5a 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/values.yaml
@@ -21,14 +21,50 @@ global:
   readinessImage: onap/oom/readiness:3.0.1
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
+  aafEnabled: true
+  persistence: {}
+  cassandra:
+    #This flag allows SDC to instantiate its own cluster, serviceName
+    #should be sdc-cs if this flag is enabled
+    localCluster: false
+    #The cassandra service name to connect to (default: shared cassandra service)
+    serviceName: cassandra
+    #Shared cassandra cluster replicaCount, should be changed if localCluster is enabled
+    #to match with its own cluster replica
+    replicaCount: 3
+    clusterName: cassandra
+    dataCenter: Pod
+
+#################################################################
+# AAF Part
+#################################################################
+certInitializer:
+  nameOverride: sdc-onboarding-be-cert-init
+  aafDeployFqi: deployer@people.osaaf.org
+  aafDeployPass: demo123456!
+  fqdn: sdc
+  fqi: sdc@sdc.onap.org
+  public_fqdn: sdc.onap.org
+  cadi_longitude: "0.0"
+  cadi_latitude: "0.0"
+  app_ns: org.osaaf.aaf
+  credsPath: /opt/app/osaaf/local
+  addconfig: true
+  keystoreFile: "org.onap.sdc.p12"
+  truststoreFile: "org.onap.sdc.trust.jks"
+  permission_user: 352070
+  permission_group: 35953
+  aaf_add_config: >
+    /opt/app/aaf_config/bin/agent.sh local showpass
+    {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/sdc-onboard-backend:1.6.7
-onboardingInitImage: onap/sdc-onboard-cassandra-init:1.6.7
+image: onap/sdc-onboard-backend:1.7.1
+onboardingInitImage: onap/sdc-onboard-cassandra-init:1.7.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -38,6 +74,10 @@ config:
   javaOptions: "-Xmx1g -Xms1g"
   cassandraSslEnabled: "false"
 
+#environment file
+env:
+  name: AUTO
+
 # default number of instances
 replicaCount: 1
 
diff --git a/kubernetes/sdc/charts/sdc-dcae-be/.helmignore b/kubernetes/sdc/components/sdc-wfd-be/.helmignore
index f0c1319444..f0c1319444 100644
--- a/kubernetes/sdc/charts/sdc-dcae-be/.helmignore
+++ b/kubernetes/sdc/components/sdc-wfd-be/.helmignore
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/Chart.yaml b/kubernetes/sdc/components/sdc-wfd-be/Chart.yaml
index 7201db2fee..7201db2fee 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/Chart.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/Chart.yaml
diff --git a/kubernetes/sdc/components/sdc-wfd-be/requirements.yaml b/kubernetes/sdc/components/sdc-wfd-be/requirements.yaml
new file mode 100644
index 0000000000..b1d52ae32a
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-wfd-be/requirements.yaml
@@ -0,0 +1,23 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#   Modifications Copyright © 2020 AT&T. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+dependencies:
+  - name: certInitializer
+    version: ~6.x-0
+    repository: '@local'
+\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/NOTES.txt b/kubernetes/sdc/components/sdc-wfd-be/templates/NOTES.txt
index a3c79b12a4..a3c79b12a4 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/templates/NOTES.txt
+++ b/kubernetes/sdc/components/sdc-wfd-be/templates/NOTES.txt
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/_helper.tpl b/kubernetes/sdc/components/sdc-wfd-be/templates/_helper.tpl
index 298a2cd673..298a2cd673 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/templates/_helper.tpl
+++ b/kubernetes/sdc/components/sdc-wfd-be/templates/_helper.tpl
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/deployment.yaml b/kubernetes/sdc/components/sdc-wfd-be/templates/deployment.yaml
index 92fe5f22af..b188cdae98 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/templates/deployment.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/templates/deployment.yaml
@@ -34,7 +34,7 @@ spec:
         app: {{ include "common.name" . }}
         release: {{ include "common.release" . }}
     spec:
-      initContainers:
+      initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
       {{- if .Values.initJob.enabled }}
       - name: {{ include "common.name" . }}-job-completion
         image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
@@ -55,6 +55,20 @@ spec:
         - name: {{ include "common.name" . }}
           image: "{{ include "common.repository" . }}/{{ .Values.image }}"
           imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          {{- if .Values.global.aafEnabled }}
+          command:
+          - sh
+          args:
+          - "-c"
+          - |
+            export $(grep '^c' {{ .Values.certInitializer.credsPath }}/mycreds.prop | xargs -0)
+            export SERVER_SSL_KEY_PASSWORD=$cadi_keystore_password_p12
+            export KEYMANAGER_PASS=$cadi_keystore_password_p12
+            export SERVER_SSL_TRUST_PASSWORD=$cadi_truststore_password
+            export SERVER_SSL_KEYSTORE_PATH={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keystoreFile }}
+            export SERVER_SSL_TRUSTSTORE_PATH={{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.truststoreFile }}
+            ./startup.sh
+          {{- end }}
           ports:
           - containerPort: {{ template "wfd-be.internalPort" . }}
           # disable liveness probe when breakpoints set in debugger
@@ -106,28 +120,9 @@ spec:
             value: "{{ .Values.config.serverSSLEnabled }}"
           - name: SERVER_SSL_KEYSTORE_TYPE
             value: "{{ .Values.config.serverSSLKeyStoreType }}"
-          - name: SERVER_SSL_KEYSTORE_PATH
-            value: "{{ .Values.config.serverSSLKeyStorePath }}"
-          - name: SERVER_SSL_KEY_PASSWORD
-            valueFrom:
-              secretKeyRef: {name: {{ include "common.release" . }}-sdc-cs-secrets, key: keystore_password}
           - name: SERVER_SSL_TRUSTSTORE_TYPE
             value: "{{ .Values.config.serverSSLTrustStoreType }}"
-          - name: SERVER_SSL_TRUSTSTORE_PATH
-            value: "{{ .Values.config.serverSSLTrustStorePath }}"
-          - name: SERVER_SSL_TRUST_PASSWORD
-            valueFrom:
-              secretKeyRef: {name: {{ include "common.release" . }}-sdc-cs-secrets, key: truststore_password}
-          volumeMounts:
-          - name: sdc-cert
-            mountPath: /keystore
-            subPath: org.onap.sdc.p12
-          - name: sdc-cert
-            mountPath: /truststore
-            subPath: org.onap.sdc.trust.jks
-      volumes:
-        - name: sdc-cert
-          secret:
-            secretName: sdc-cert
+          volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
+      volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
       imagePullSecrets:
       - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/templates/ingress.yaml b/kubernetes/sdc/components/sdc-wfd-be/templates/ingress.yaml
index 8f87c68f1e..8f87c68f1e 100644
--- a/kubernetes/sdc/charts/sdc-dcae-fe/templates/ingress.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/templates/ingress.yaml
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/job.yaml b/kubernetes/sdc/components/sdc-wfd-be/templates/job.yaml
index 9235cb441c..9235cb441c 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/templates/job.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/templates/job.yaml
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/service.yaml b/kubernetes/sdc/components/sdc-wfd-be/templates/service.yaml
index d9ea066ab3..d9ea066ab3 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/templates/service.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/templates/service.yaml
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/values.yaml b/kubernetes/sdc/components/sdc-wfd-be/values.yaml
index 4ab95048ca..6147b064ce 100644
--- a/kubernetes/sdc/charts/sdc-wfd-be/values.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/values.yaml
@@ -21,14 +21,49 @@ global:
   readinessImage: onap/oom/readiness:3.0.1
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
+  aafEnabled: true
+  cassandra:
+    #This flag allows SDC to instantiate its own cluster, serviceName
+    #should be sdc-cs if this flag is enabled
+    localCluster: false
+    #The cassandra service name to connect to (default: shared cassandra service)
+    serviceName: cassandra
+    #Shared cassandra cluster replicaCount, should be changed if localCluster is enabled
+    #to match with its own cluster replica
+    replicaCount: 3
+    clusterName: cassandra
+    dataCenter: Pod
+
+#################################################################
+# AAF Part
+#################################################################
+certInitializer:
+  nameOverride: sdc-wfd-be-cert-init
+  aafDeployFqi: deployer@people.osaaf.org
+  aafDeployPass: demo123456!
+  fqdn: sdc
+  fqi: sdc@sdc.onap.org
+  public_fqdn: sdc.onap.org
+  cadi_longitude: "0.0"
+  cadi_latitude: "0.0"
+  app_ns: org.osaaf.aaf
+  credsPath: /opt/app/osaaf/local
+  addconfig: true
+  keystoreFile: "org.onap.sdc.p12"
+  truststoreFile: "org.onap.sdc.trust.jks"
+  permission_user: 352070
+  permission_group: 35953
+  aaf_add_config: >
+    /opt/app/aaf_config/bin/agent.sh local showpass
+    {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/workflow-backend:1.6.4
-configInitImage: onap/workflow-init:1.6.4
+image: onap/sdc-workflow-backend:1.7.0
+configInitImage: onap/sdc-workflow-init:1.7.0
 pullPolicy: Always
 
 initJob:
@@ -38,22 +73,19 @@ config:
   javaOptions: "-Xmx1536m -Xms1536m"
   cassandraAuthenticationEnabled: true
   cassandraClientPort: 9042
-
   sdcProtocol: HTTPS
   sdcEndpoint: sdc-be:8443
   sdcExternalUser: workflow
-
   serverSSLEnabled: true
-
   serverSSLKeyStoreType: jks
-  serverSSLKeyStorePath: /home/sdc/etc/keystore
-
   serverSSLTrustStoreType: jks
-  serverSSLTrustStorePath: /home/sdc/etc/truststore
-
   cassandraSSLEnabled: false
   cassandraTrustStorePath: /home/sdc/etc/truststore
 
+# environment file
+env:
+  name: AUTO
+
 # default number of instances
 replicaCount: 1
 
@@ -82,7 +114,6 @@ service:
   externalPort2: 8443
   nodePort: "57" # only one node port. set to http or https port depending on isHttpsEnabled property
 
-
 ingress:
   enabled: false
   service:
@@ -91,7 +122,7 @@ ingress:
       port: 8443
   config:
     ssl: "redirect"
-    
+
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious
   # choice for the user. This also increases chances charts run on environments with little
diff --git a/kubernetes/sdc/charts/sdc-dcae-fe/.helmignore b/kubernetes/sdc/components/sdc-wfd-fe/.helmignore
index f0c1319444..f0c1319444 100644
--- a/kubernetes/sdc/charts/sdc-dcae-fe/.helmignore
+++ b/kubernetes/sdc/components/sdc-wfd-fe/.helmignore
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/Chart.yaml b/kubernetes/sdc/components/sdc-wfd-fe/Chart.yaml
index d5ef0a4db7..d5ef0a4db7 100644
--- a/kubernetes/sdc/charts/sdc-wfd-fe/Chart.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-fe/Chart.yaml
diff --git a/kubernetes/sdc/components/sdc-wfd-fe/requirements.yaml b/kubernetes/sdc/components/sdc-wfd-fe/requirements.yaml
new file mode 100644
index 0000000000..b1d52ae32a
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-wfd-fe/requirements.yaml
@@ -0,0 +1,23 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#   Modifications Copyright © 2020 AT&T. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+dependencies:
+  - name: certInitializer
+    version: ~6.x-0
+    repository: '@local'
+\ No newline at end of file
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/templates/NOTES.txt b/kubernetes/sdc/components/sdc-wfd-fe/templates/NOTES.txt
index a3c79b12a4..a3c79b12a4 100644
--- a/kubernetes/sdc/charts/sdc-wfd-fe/templates/NOTES.txt
+++ b/kubernetes/sdc/components/sdc-wfd-fe/templates/NOTES.txt
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/templates/_helper.tpl b/kubernetes/sdc/components/sdc-wfd-fe/templates/_helper.tpl
index 546bab7ddf..546bab7ddf 100644
--- a/kubernetes/sdc/charts/sdc-wfd-fe/templates/_helper.tpl
+++ b/kubernetes/sdc/components/sdc-wfd-fe/templates/_helper.tpl
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/templates/deployment.yaml b/kubernetes/sdc/components/sdc-wfd-fe/templates/deployment.yaml
index 061b765f9a..ad10480a3f 100644
--- a/kubernetes/sdc/charts/sdc-wfd-fe/templates/deployment.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-fe/templates/deployment.yaml
@@ -33,7 +33,7 @@ spec:
         app: {{ include "common.name" . }}
         release: {{ include "common.release" . }}
     spec:
-      initContainers:
+      initContainers: {{ include "common.certInitializer.initContainer" . | nindent 6 }}
       - name: {{ include "common.name" . }}-readiness
         command:
         - /app/ready.py
@@ -48,10 +48,39 @@ spec:
               fieldPath: metadata.namespace
         image: "{{ include "common.repository" . }}/{{ .Values.global.readinessImage }}"
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+      {{- if .Values.global.aafEnabled }}
+      - name: {{ include "common.fullname" . }}-move-cert
+        command:
+          - /bin/sh
+        args:
+          - -c
+          - |
+            cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keystoreFile }} /sdc-certs/{{ .Values.certInitializer.keystoreFile }}
+            cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.truststoreFile }} /sdc-certs/{{ .Values.certInitializer.truststoreFile }}
+            cp {{ .Values.certInitializer.credsPath }}/mycreds.prop /sdc-certs/mycreds.prop
+        image: "{{ .Values.global.busyboxRepository }}/{{ .Values.global.busyboxImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
+          - name: sdc-certs
+            mountPath: /sdc-certs
+      {{- end }}
       containers:
         - name: {{ include "common.name" . }}
           image: "{{ include "common.repository" . }}/{{ .Values.image }}"
           imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          {{- if .Values.global.aafEnabled }}
+          command:
+          - sh
+          args:
+          - "-c"
+          - |
+            export $(grep '^c' /sdc-certs/mycreds.prop | xargs -0)
+            export KEYSTORE_PASS=$cadi_keystore_password_p12
+            export TRUSTSTORE_PASS=$cadi_truststore_password
+            export KEYSTORE_PATH=/etc/{{ .Values.certInitializer.keystoreFile }}
+            export TRUSTSTORE_PATH=/etc/{{ .Values.certInitializer.truststoreFile }}
+            ./startup.sh
+          {{- end }}
           ports:
           - containerPort: {{ template "wfd-fe.internalPort" . }}
           {{ if .Values.liveness.enabled }}
@@ -68,7 +97,7 @@ spec:
             periodSeconds: {{ .Values.readiness.periodSeconds }}
           env:
           - name: ENVNAME
-            value: {{ .Values.global.env.name }}
+            value: {{ .Values.env.name }}
           - name: JAVA_OPTIONS
             value: {{ .Values.config.javaOptions }}
           - name: BACKEND
@@ -76,16 +105,6 @@ spec:
           - name: IS_HTTPS
             value: "{{ .Values.config.isHttpsEnabled}}"
             {{ if and .Values.config.isHttpsEnabled (eq .Values.security.isDefaultStore false) }}
-          - name: KEYSTORE_PASS
-            valueFrom:
-              secretKeyRef: {name: {{ include "common.release" . }}-sdc-cs-secrets, key: keystore_password}
-          - name: TRUSTSTORE_PASS
-            valueFrom:
-              secretKeyRef: {name: {{ include "common.release" . }}-sdc-cs-secrets, key: truststore_password}
-          - name: TRUSTSTORE_PATH
-            value: "{{ .Values.security.storePath }}/{{ .Values.security.truststoreFilename }}"
-          - name: KEYSTORE_PATH
-            value: "{{ .Values.security.storePath }}/{{ .Values.security.keystoreFilename }}"
           - name: TRUST_ALL
             value: "{{ .Values.config.isTrustAll}}"
             {{ end }}
@@ -93,12 +112,17 @@ spec:
           - name: {{ include "common.fullname" . }}-localtime
             mountPath: /etc/localtime
             readOnly: true
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/etc/org.onap.sdc.p12
-            subPath: org.onap.sdc.p12
-          - name: sdc-cert
-            mountPath: /var/lib/jetty/etc/org.onap.sdc.trust.jks
-            subPath: org.onap.sdc.trust.jks
+          {{- if .Values.global.aafEnabled }}
+          - name: sdc-certs
+            mountPath: /sdc-certs
+            subpath: mycreds.prop
+          - name: sdc-certs
+            mountPath: /var/lib/jetty/etc/{{ .Values.certInitializer.keystoreFile }}
+            subPath: {{ .Values.certInitializer.keystoreFile }}
+          - name: sdc-certs
+            mountPath: /var/lib/jetty/etc/{{ .Values.certInitializer.truststoreFile }}
+            subPath: {{ .Values.certInitializer.truststoreFile }}
+          {{ end }}
           resources:
 {{ include "common.resources" . | indent 12 }}
         {{- if .Values.nodeSelector }}
@@ -121,13 +145,15 @@ spec:
             mountPath: /var/log/onap
           - name: {{ include "common.fullname" . }}-data-filebeat
             mountPath: /usr/share/filebeat/data
-      volumes:
+      volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
         - name: {{ include "common.fullname" . }}-localtime
           hostPath:
             path: /etc/localtime
-        - name: sdc-cert
-          secret:
-            secretName: sdc-cert
+        {{- if .Values.global.aafEnabled }}
+        - name: sdc-certs
+          emptyDir:
+            medium: "Memory"
+        {{- end }}
         - name: {{ include "common.fullname" . }}-filebeat-conf
           configMap:
             name: {{ include "common.release" . }}-sdc-filebeat-configmap
diff --git a/kubernetes/sdc/charts/sdc-fe/templates/ingress.yaml b/kubernetes/sdc/components/sdc-wfd-fe/templates/ingress.yaml
index 8f87c68f1e..8f87c68f1e 100644
--- a/kubernetes/sdc/charts/sdc-fe/templates/ingress.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-fe/templates/ingress.yaml
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/templates/service.yaml b/kubernetes/sdc/components/sdc-wfd-fe/templates/service.yaml
index 96e1c0aee4..96e1c0aee4 100644
--- a/kubernetes/sdc/charts/sdc-wfd-fe/templates/service.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-fe/templates/service.yaml
diff --git a/kubernetes/sdc/charts/sdc-wfd-fe/values.yaml b/kubernetes/sdc/components/sdc-wfd-fe/values.yaml
index 1e6e3fe018..56804924ca 100644
--- a/kubernetes/sdc/charts/sdc-wfd-fe/values.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-fe/values.yaml
@@ -21,13 +21,37 @@ global:
   readinessImage: onap/oom/readiness:3.0.1
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
+  aafEnabled: true
+
+#################################################################
+# AAF Part
+#################################################################
+certInitializer:
+  nameOverride: sdc-wfd-fe-cert-init
+  aafDeployFqi: deployer@people.osaaf.org
+  aafDeployPass: demo123456!
+  fqdn: sdc
+  fqi: sdc@sdc.onap.org
+  public_fqdn: sdc.onap.org
+  cadi_longitude: "0.0"
+  cadi_latitude: "0.0"
+  app_ns: org.osaaf.aaf
+  credsPath: /opt/app/osaaf/local
+  addconfig: true
+  keystoreFile: "org.onap.sdc.p12"
+  truststoreFile: "org.onap.sdc.trust.jks"
+  permission_user: 352070
+  permission_group: 35953
+  aaf_add_config: >
+    /opt/app/aaf_config/bin/agent.sh local showpass
+    {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/workflow-frontend:1.6.4
+image: onap/sdc-workflow-frontend:1.7.0
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -40,11 +64,13 @@ config:
   # following flag decides whether to check the certificate on the outgoing proxy request or whether to trust all parties
   isTrustAll: true
 # https relevant settings. Change in case you have other trust files then default ones.
+
+#environment file
+env:
+  name: AUTO
+
 security:
   isDefaultStore: false
-  truststoreFilename: "org.onap.sdc.trust.jks"
-  keystoreFilename: "org.onap.sdc.p12"
-  storePath: "etc"
 
 # default number of instances
 replicaCount: 1
diff --git a/kubernetes/sdc/requirements.yaml b/kubernetes/sdc/requirements.yaml
index 2ce7b9dc24..1b7cd0ebb1 100644
--- a/kubernetes/sdc/requirements.yaml
+++ b/kubernetes/sdc/requirements.yaml
@@ -14,15 +14,23 @@
 # limitations under the License.
 
 dependencies:
-  - name: common
+  - name: sdc-be
     version: ~6.x-0
-    repository: '@local'
-
-  - name: cassandra
+    repository: 'file://components/sdc-be'
+  - name: sdc-cs
     version: ~6.x-0
-    # local reference to common chart, as it is
-    # a part of this chart's package and will not
-    # be published independently to a repo (at this point)
-    repository: '@local'
-    condition: global.cassandra.localCluster
-
+    repository: 'file://components/sdc-cs'
+  - name: sdc-fe
+    version: ~6.x-0
+    repository: 'file://components/sdc-fe'
+  - name: sdc-onboarding-be
+    version: ~6.x-0
+    repository: 'file://components/sdc-onboarding-be'
+  - name: sdc-wfd-be
+    version: ~6.x-0
+    repository: 'file://components/sdc-wfd-be'
+    condition: sdc-wfd.enabled
+  - name: sdc-wfd-fe
+    version: ~6.x-0
+    repository: 'file://components/sdc-wfd-fe'
+    condition: sdc-wfd.enabled
+\ No newline at end of file
diff --git a/kubernetes/sdc/resources/cert/org.onap.sdc.p12 b/kubernetes/sdc/resources/cert/org.onap.sdc.p12
deleted file mode 100644
index 446856071b..0000000000
--- a/kubernetes/sdc/resources/cert/org.onap.sdc.p12
+++ /dev/null
diff --git a/kubernetes/sdc/resources/cert/org.onap.sdc.trust.jks b/kubernetes/sdc/resources/cert/org.onap.sdc.trust.jks
deleted file mode 100644
index e6686cc08c..0000000000
--- a/kubernetes/sdc/resources/cert/org.onap.sdc.trust.jks
+++ /dev/null
diff --git a/kubernetes/sdc/resources/config/environments/AUTO.json b/kubernetes/sdc/resources/config/environments/AUTO.json
index 2bd165b723..79428f73c6 100755
--- a/kubernetes/sdc/resources/config/environments/AUTO.json
+++ b/kubernetes/sdc/resources/config/environments/AUTO.json
@@ -1,6 +1,6 @@
 {
-    "name": "{{ .Values.global.env.name }}",
-    "description": "OpenSource-{{ .Values.global.env.name }}",
+    "name": "{{ .Values.env.name }}",
+    "description": "OpenSource-{{ .Values.env.name }}",
     "cookbook_versions": {
         "Deploy-SDandC": "= 1.0.0"
     },
@@ -12,9 +12,6 @@
         "CS_VIP": "{{.Values.global.cassandra.serviceName}}.{{include "common.namespace" .}}",
         "BE_VIP": "sdc-be.{{include "common.namespace" .}}",
         "ONBOARDING_BE_VIP": "sdc-onboarding-be.{{include "common.namespace" .}}",
-        "DCAE_BE_VIP": "sdc-dcae-be.{{include "common.namespace" .}}",
-        "DCAE_FE_VIP": "sdc-dcae-fe.{{include "common.namespace" .}}",
-        "DCAE_TOSCA_LAB_VIP": "sdc-dcae-tosca-lab.{{include "common.namespace" .}}",
         "FE_VIP": "sdc-fe.{{include "common.namespace" .}}",
         "interfaces": {
             "application": "eth0",
@@ -107,7 +104,8 @@
       },
       "jetty": {
          "keystore_pwd": "${KEYSTORE_PASS}",
-         "truststore_pwd": "${TRUSTSTORE_PASS}"
+         "truststore_pwd": "${TRUSTSTORE_PASS}",
+         "keymanager_pwd": "${KEYMANAGER_PASS}"
       }
     }
 }
diff --git a/kubernetes/sdc/templates/secrets.yaml b/kubernetes/sdc/templates/secrets.yaml
index 6187104ce6..dd61412d40 100644
--- a/kubernetes/sdc/templates/secrets.yaml
+++ b/kubernetes/sdc/templates/secrets.yaml
@@ -36,17 +36,3 @@ data:
   keystore_password: "{{ .Values.global.secrets.keystore_password }}"
   # workflow
   wf_external_user_password: "{{ .Values.global.secrets.wf_external_user_password }}"
----
-apiVersion: v1
-kind: Secret
-metadata:
-  name: sdc-cert
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-type: Opaque
-data:
-{{ tpl (.Files.Glob "resources/cert/*").AsSecrets . | indent 2 }}
diff --git a/kubernetes/sdc/values.yaml b/kubernetes/sdc/values.yaml
index 2694b5de80..4cd0597e10 100644
--- a/kubernetes/sdc/values.yaml
+++ b/kubernetes/sdc/values.yaml
@@ -15,8 +15,6 @@
 
 global:
   persistence: {}
-  env:
-    name: AUTO
   secrets:
     sdc_user: YXNkY191c2Vy
     sdc_password: QWExMjM0JV4h
@@ -30,6 +28,7 @@ global:
   ubuntuInitImage: ubuntu-init:1.0.0
   busyboxRepository: registry.hub.docker.com
   busyboxImage: library/busybox:latest
+  aafEnabled: true
   cassandra:
    #This flag allows SDC to instantiate its own cluster, serviceName
    #should be sdc-cs if this flag is enabled
@@ -44,6 +43,11 @@ global:
   security:
     disableHttp: true
   envsubstImage: dibi/envsubst
+
+# Environment file
+env:
+  name: AUTO
+
 config:
   logstashServiceName: log-ls
   logstashPort: 5044
@@ -60,3 +64,7 @@ cassandra:
   persistence:
     mountSubPath: sdc/sdc-cs/CS
     enabled: true
+
+# dependency / sub-chart configuration
+sdc-wfd:
+  enabled: true
+\ No newline at end of file