diff options
Diffstat (limited to 'kubernetes/sdc/charts/sdc-wfd-be/templates')
4 files changed, 225 insertions, 0 deletions
diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-wfd-be/templates/NOTES.txt new file mode 100644 index 0000000000..a3c79b12a4 --- /dev/null +++ b/kubernetes/sdc/charts/sdc-wfd-be/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-wfd-be/templates/deployment.yaml new file mode 100644 index 0000000000..a8225040ac --- /dev/null +++ b/kubernetes/sdc/charts/sdc-wfd-be/templates/deployment.yaml @@ -0,0 +1,86 @@ +# Copyright © 2018 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - name: {{ include "common.name" . }}-job-completion + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: "{{ .Values.global.pullPolicy | default .Values.pullPolicy }}" + command: + - /root/job_complete.py + args: + - --job-name + - {{ include "common.fullname" . }}-workflow-init + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{ if .Values.liveness.enabled }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end }} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: JAVA_OPTIONS + value: {{ .Values.config.javaOptions }} + - name: CS_HOSTS + value: "{{ .Values.config.cassandraHosts }}" + - name: CS_PORT + value: "{{ .Values.config.cassandraClientPort }}" + - name: CS_USER + valueFrom: + secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user} + - name: CS_PASSWORD + valueFrom: + secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password} + - name: SDC_PROTOCOL + value: "{{ .Values.config.sdcProtocol }}" + - name: SDC_ENDPOINT + value: "{{ .Values.config.sdcEndpoint }}" + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/job.yaml b/kubernetes/sdc/charts/sdc-wfd-be/templates/job.yaml new file mode 100644 index 0000000000..f4a68d7752 --- /dev/null +++ b/kubernetes/sdc/charts/sdc-wfd-be/templates/job.yaml @@ -0,0 +1,67 @@ +# Copyright © 2018 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: batch/v1 +kind: Job +metadata: + name: {{ include "common.fullname" . }}-workflow-init + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }}-job + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + backoffLimit: 20 + template: + metadata: + labels: + app: {{ include "common.name" . }}-job + release: {{ .Release.Name }} + spec: + restartPolicy: Never + initContainers: + - name: {{ include "common.name" . }}-init-readiness + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /root/job_complete.py + args: + - --job-name + - {{ .Release.Name }}-sdc-cs-config-cassandra + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + containers: + - name: {{ include "common.name" . }}-job + image: "{{ include "common.repository" . }}/{{ .Values.configInitImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + env: + - name: CS_HOST + value: "sdc-cs" + - name: CS_PORT + value: "{{ .Values.config.cassandraThriftClientPort }}" + - name: CS_AUTHENTICATE + value: "{{ .Values.config.cassandaAuthenticationEnabled }}" + - name: CS_USER + valueFrom: + secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_user} + - name: CS_PASSWORD + valueFrom: + secretKeyRef: {name: {{ .Release.Name }}-sdc-cs-secrets, key: sdc_password} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/sdc/charts/sdc-wfd-be/templates/service.yaml b/kubernetes/sdc/charts/sdc-wfd-be/templates/service.yaml new file mode 100644 index 0000000000..acabaae282 --- /dev/null +++ b/kubernetes/sdc/charts/sdc-wfd-be/templates/service.yaml @@ -0,0 +1,39 @@ +# Copyright © 2018 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName | default "http" }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName | default "http" }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }}
\ No newline at end of file |