diff options
Diffstat (limited to 'kubernetes/portal/resources/config')
12 files changed, 1075 insertions, 0 deletions
diff --git a/kubernetes/portal/resources/config/log/filebeat/filebeat.yml b/kubernetes/portal/resources/config/log/filebeat/filebeat.yml new file mode 100644 index 0000000000..f316b866af --- /dev/null +++ b/kubernetes/portal/resources/config/log/filebeat/filebeat.yml @@ -0,0 +1,41 @@ +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["logstash.onap-log:5044"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/portal/resources/config/log/portal/onapportal/logback.xml b/kubernetes/portal/resources/config/log/portal/onapportal/logback.xml new file mode 100644 index 0000000000..be55dc9cff --- /dev/null +++ b/kubernetes/portal/resources/config/log/portal/onapportal/logback.xml @@ -0,0 +1,303 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ============LICENSE_START========================================== + ONAP Portal + =================================================================== + Copyright © 2017 AT&T Intellectual Property. All rights reserved. + =================================================================== + + Unless otherwise specified, all software contained herein is licensed + under the Apache License, Version 2.0 (the “License”); + you may not use this software except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + Unless otherwise specified, all documentation contained herein is licensed + under the Creative Commons License, Attribution 4.0 Intl. (the “License”); + you may not use this documentation except in compliance with the License. + You may obtain a copy of the License at + + https://creativecommons.org/licenses/by/4.0/ + + Unless required by applicable law or agreed to in writing, documentation + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + ============LICENSE_END============================================ + + ECOMP is a trademark and service mark of AT&T Intellectual Property. + --> + +<!DOCTYPE xml> +<configuration scan="true" scanPeriod="3 seconds" debug="true"> + <!-- Log-back files for the ECOMP Portal are created in directory + ${catalina.base}/logs/${componentName}; e.g., apache-tomcat-8.0.35/logs/onapportal/application.log --> + <!--<jmxConfigurator /> --> + + <!-- specify the component name --> + <property name="componentName" value="onapportal"></property> + + <!-- specify the base path of the log directory --> + <property name="logDirPrefix" value="${catalina.base}/logs"></property> + + <!-- The directories where logs are written --> + <property name="logDirectory" value="${logDirPrefix}/${componentName}" /> + <!-- Can easily relocate debug logs by modifying this path. --> + <property name="debugLogDirectory" value="${logDirPrefix}/${componentName}" /> + + <!-- log file names --> + <property name="generalLogName" value="application" /> + <property name="errorLogName" value="error" /> + <property name="metricsLogName" value="metrics" /> + <property name="auditLogName" value="audit" /> + <property name="debugLogName" value="debug" /> + <!-- These loggers are not used in code (yet). <property name="securityLogName" + value="security" /> <property name="policyLogName" value="policy" /> <property + name="performanceLogName" value="performance" /> <property name="serverLogName" + value="server" /> --> + + <!-- ServerFQDN=Server, --> + <property name="auditLoggerPattern" + value="%X{AuditLogBeginTimestamp}|%X{AuditLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" /> + + <property name="metricsLoggerPattern" + value="%X{MetricsLogBeginTimestamp}|%X{MetricsLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVisualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" /> + + <property name="errorLoggerPattern" + value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{ClassName}|%X{AlertSeverity}|%X{ErrorCode}|%X{ErrorDescription}| %msg%n" /> + + <property name="defaultLoggerPattern" + value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ClassName}| %msg%n" /> + + <!-- use %class so library logging calls yield their class name --> + <property name="applicationLoggerPattern" + value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%class{36}| %msg%n" /> + + <!-- + <property name="defaultPattern" + value="%date{ISO8601}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}| %msg%n" /> + <property name="debugLoggerPattern" + value="%date{ISO8601}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}| %msg%n" /> + --> + <!-- <property name="debugLoggerPattern" value="%date{ISO8601}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|[%caller{3}]|%msg%n" + /> --> + <!-- Example evaluator filter applied against console appender --> + <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender"> + <encoder> + <pattern>${applicationLoggerPattern}</pattern> + </encoder> + </appender> + + <!-- ============================================================================ --> + <!-- EELF Appenders --> + <!-- ============================================================================ --> + + <!-- The EELFAppender is used to record events to the general application + log --> + + + <appender name="EELF" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${generalLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily rollover --> + <fileNamePattern>${logDirectory}/${generalLogName}.log.%d{yyyy-MM-dd}.zip + </fileNamePattern> + <maxHistory>30</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${applicationLoggerPattern}</pattern> + </encoder> + <filter class="org.openecomp.portalapp.portal.utils.CustomLoggingFilter" /> + </appender> + + <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <!-- Class name is part of caller data --> + <includeCallerData>true</includeCallerData> + <appender-ref ref="EELF" /> + </appender> + + <!-- EELF Security Appender. This appender is used to record security events + to the security log file. Security events are separate from other loggers + in EELF so that security log records can be captured and managed in a secure + way separate from the other logs. This appender is set to never discard any + events. --> + <!-- <appender name="EELFSecurity" class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${securityLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip </fileNamePattern> + <minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> <encoder> <pattern>${defaultPattern}</pattern> </encoder> + </appender> <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> <discardingThreshold>0</discardingThreshold> <appender-ref + ref="EELFSecurity" /> </appender> --> + + <!-- EELF Performance Appender. This appender is used to record performance + records. --> + <!-- <appender name="EELFPerformance" class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${performanceLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip </fileNamePattern> + <minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> <encoder> <outputPatternAsHeader>true</outputPatternAsHeader> + <pattern>${defaultPattern}</pattern> </encoder> </appender> <appender name="asyncEELFPerformance" + class="ch.qos.logback.classic.AsyncAppender"> <queueSize>256</queueSize> + <appender-ref ref="EELFPerformance" /> </appender> --> + + <!-- EELF Server Appender. This appender is used to record Server related + logging events. The Server logger and appender are specializations of the + EELF application root logger and appender. This can be used to segregate + Server events from other components, or it can be eliminated to record these + events as part of the application root log. --> + <!-- <appender name="EELFServer" class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${serverLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip </fileNamePattern> + <minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> <encoder> <pattern>${defaultPattern}</pattern> </encoder> + </appender> <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> <appender-ref ref="EELFServer" /> </appender> --> + + <!-- EELF Policy Appender. This appender is used to record Policy engine + related logging events. The Policy logger and appender are specializations + of the EELF application root logger and appender. This can be used to segregate + Policy engine events from other components, or it can be eliminated to record + these events as part of the application root log. --> + <!-- <appender name="EELFPolicy" class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${policyLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip </fileNamePattern> + <minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> <encoder> <pattern>${defaultPattern}</pattern> </encoder> + </appender> <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> <appender-ref ref="EELFPolicy" /> </appender> --> + + <!-- EELF Audit Appender. This appender is used to record audit engine related + logging events. The audit logger and appender are specializations of the + EELF application root logger and appender. This can be used to segregate + Policy engine events from other components, or it can be eliminated to record + these events as part of the application root log. --> + + <appender name="EELFAudit" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${auditLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily roll over --> + <fileNamePattern>${logDirectory}/${auditLogName}.log.%d{yyyy-MM-dd}.zip + </fileNamePattern> + <maxHistory>30</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${auditLoggerPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFAudit" /> + </appender> + + <appender name="EELFMetrics" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${metricsLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily roll over --> + <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d{yyyy-MM-dd}.zip + </fileNamePattern> + <maxHistory>30</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${metricsLoggerPattern}</pattern> + </encoder> + </appender> + + + <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFMetrics" /> + </appender> + + <appender name="EELFError" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${errorLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily roll over --> + <fileNamePattern>${logDirectory}/${errorLogName}.log.%d{yyyy-MM-dd}.zip + </fileNamePattern> + <maxHistory>30</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${errorLoggerPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFError" /> + </appender> + + <appender name="EELFDebug" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${debugLogDirectory}/${debugLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily roll over --> + <fileNamePattern>${logDirectory}/${debugLogName}.log.%d{yyyy-MM-dd}.zip + </fileNamePattern> + <maxHistory>30</maxHistory> + </rollingPolicy> + <encoder> + <pattern>${defaultLoggerPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFDebug" /> + <includeCallerData>true</includeCallerData> + </appender> + + + <!-- ============================================================================ --> + <!-- EELF loggers --> + <!-- ============================================================================ --> + <logger name="com.att.eelf" level="info" additivity="false"> + <appender-ref ref="asyncEELF" /> + </logger> + + <!-- <logger name="com.att.eelf.security" level="info" additivity="false"> + <appender-ref ref="asyncEELFSecurity" /> </logger> <logger name="com.att.eelf.perf" + level="info" additivity="false"> <appender-ref ref="asyncEELFPerformance" + /> </logger> <logger name="com.att.eelf.server" level="info" additivity="false"> + <appender-ref ref="asyncEELFServer" /> </logger> <logger name="com.att.eelf.policy" + level="info" additivity="false"> <appender-ref ref="asyncEELFPolicy" /> </logger> --> + + <logger name="com.att.eelf.audit" level="info" additivity="false"> + <appender-ref ref="asyncEELFAudit" /> + </logger> + + <logger name="com.att.eelf.metrics" level="info" additivity="false"> + <appender-ref ref="asyncEELFMetrics" /> + </logger> + + <logger name="com.att.eelf.error" level="info" additivity="false"> + <appender-ref ref="asyncEELFError" /> + </logger> + + <logger name="com.att.eelf.debug" level="debug" additivity="false"> + <appender-ref ref="asyncEELFDebug" /> + </logger> + + <root level="INFO"> + <appender-ref ref="asyncEELF" /> + </root> + +</configuration> diff --git a/kubernetes/portal/resources/config/log/portal/onapportalsdk/logback.xml b/kubernetes/portal/resources/config/log/portal/onapportalsdk/logback.xml new file mode 100644 index 0000000000..32a790c6a3 --- /dev/null +++ b/kubernetes/portal/resources/config/log/portal/onapportalsdk/logback.xml @@ -0,0 +1,371 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ============LICENSE_START========================================== + ONAP Portal SDK + =================================================================== + Copyright © 2017 AT&T Intellectual Property. All rights reserved. + =================================================================== + + Unless otherwise specified, all software contained herein is licensed + under the Apache License, Version 2.0 (the “License”); + you may not use this software except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + Unless otherwise specified, all documentation contained herein is licensed + under the Creative Commons License, Attribution 4.0 Intl. (the “License”); + you may not use this documentation except in compliance with the License. + You may obtain a copy of the License at + + https://creativecommons.org/licenses/by/4.0/ + + Unless required by applicable law or agreed to in writing, documentation + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + ============LICENSE_END============================================ + + ECOMP is a trademark and service mark of AT&T Intellectual Property. + --> + +<configuration scan="true" scanPeriod="3 seconds" debug="true"> + <!-- + Logback files for the ONAP Portal SDK Application + are created in directory ${catalina.base}/logs/${componentName} + e.g., apache-tomcat-8.0.35/logs/epsdk_app/application.log + --> + <!--<jmxConfigurator /> --> + + <!-- specify the component name --> + <property name="componentName" value="epsdk_app"></property> + + <!-- specify the base path of the log directory --> + <property name="logDirPrefix" value="${catalina.base}/logs"></property> + + <!-- The directories where logs are written --> + <property name="logDirectory" value="${logDirPrefix}/${componentName}" /> + <!-- Can easily relocate debug logs by modifying this path. --> + <property name="debugLogDirectory" value="${logDirPrefix}/${componentName}" /> + + <!-- log file names --> + <property name="generalLogName" value="application" /> + <property name="errorLogName" value="error" /> + <property name="metricsLogName" value="metrics" /> + <property name="auditLogName" value="audit" /> + <property name="debugLogName" value="debug" /> + <!-- + These loggers are not used in code (yet). + <property name="securityLogName" value="security" /> + <property name="policyLogName" value="policy" /> + <property name="performanceLogName" value="performance" /> + <property name="serverLogName" value="server" /> + --> + + <!-- 1610 Logging Fields Format Revisions --> + <property name="auditLoggerPattern" + value="%X{AuditLogBeginTimestamp}|%X{AuditLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" /> + + <property name="metricsLoggerPattern" + value="%X{MetricsLogBeginTimestamp}|%X{MetricsLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVisualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" /> + + <property name="errorLoggerPattern" + value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{ClassName}|%X{AlertSeverity}|%X{ErrorCode}|%X{ErrorDescription}| %msg%n" /> + + <property name="defaultLoggerPattern" + value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ClassName}| %msg%n" /> + + <!-- use %class so library logging calls yield their class name --> + <property name="applicationLoggerPattern" + value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%class{36}| %msg%n" /> + + <!-- Example evaluator filter applied against console appender --> + <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender"> + <encoder> + <pattern>${defaultLoggerPattern}</pattern> + </encoder> + </appender> + + <!-- ============================================================================ --> + <!-- EELF Appenders --> + <!-- ============================================================================ --> + + <!-- The EELFAppender is used to record events to the general application + log --> + + + <appender name="EELF" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${generalLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily rollover --> + <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> + + <!-- keep 30 days' worth of history capped at 3GB total size --> + <maxHistory>30</maxHistory> + <totalSizeCap>3GB</totalSizeCap> + + </rollingPolicy> + <encoder> + <pattern>${applicationLoggerPattern}</pattern> + </encoder> + <filter class="org.onap.portalapp.util.CustomLoggingFilter" /> + </appender> + + <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <!-- Class name is part of caller data --> + <includeCallerData>true</includeCallerData> + <appender-ref ref="EELF" /> + </appender> + + <!-- EELF Security Appender. This appender is used to record security events + to the security log file. Security events are separate from other loggers + in EELF so that security log records can be captured and managed in a secure + way separate from the other logs. This appender is set to never discard any + events. --> + <!-- + <appender name="EELFSecurity" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${securityLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>${defaultPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <discardingThreshold>0</discardingThreshold> + <appender-ref ref="EELFSecurity" /> + </appender> + --> + + <!-- EELF Performance Appender. This appender is used to record performance + records. --> + <!-- + <appender name="EELFPerformance" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${performanceLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <outputPatternAsHeader>true</outputPatternAsHeader> + <pattern>${defaultPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFPerformance" /> + </appender> + --> + + <!-- EELF Server Appender. This appender is used to record Server related + logging events. The Server logger and appender are specializations of the + EELF application root logger and appender. This can be used to segregate Server + events from other components, or it can be eliminated to record these events + as part of the application root log. --> + <!-- + <appender name="EELFServer" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${serverLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>${defaultPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFServer" /> + </appender> + --> + + <!-- EELF Policy Appender. This appender is used to record Policy engine + related logging events. The Policy logger and appender are specializations + of the EELF application root logger and appender. This can be used to segregate + Policy engine events from other components, or it can be eliminated to record + these events as part of the application root log. --> + <!-- + <appender name="EELFPolicy" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${policyLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>${defaultPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFPolicy" /> + </appender> + --> + + <!-- EELF Audit Appender. This appender is used to record audit engine + related logging events. The audit logger and appender are specializations + of the EELF application root logger and appender. This can be used to segregate + Policy engine events from other components, or it can be eliminated to record + these events as part of the application root log. --> + + <appender name="EELFAudit" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${auditLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily rollover --> + <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> + + <!-- keep 30 days' worth of history capped at 3GB total size --> + <maxHistory>30</maxHistory> + <totalSizeCap>3GB</totalSizeCap> + + </rollingPolicy> + <encoder> + <pattern>${auditLoggerPattern}</pattern> + </encoder> + </appender> + <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFAudit" /> + </appender> + + <appender name="EELFMetrics" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${metricsLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily rollover --> + <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> + + <!-- keep 30 days' worth of history capped at 3GB total size --> + <maxHistory>30</maxHistory> + <totalSizeCap>3GB</totalSizeCap> + + </rollingPolicy> + <encoder> + <pattern>${metricsLoggerPattern}</pattern> + </encoder> + </appender> + + + <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFMetrics"/> + </appender> + + <appender name="EELFError" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${errorLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily rollover --> + <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> + + <!-- keep 30 days' worth of history capped at 3GB total size --> + <maxHistory>30</maxHistory> + <totalSizeCap>3GB</totalSizeCap> + + </rollingPolicy> + <encoder> + <pattern>${errorLoggerPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFError"/> + </appender> + + <appender name="EELFDebug" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${debugLogDirectory}/${debugLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <!-- daily rollover --> + <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> + + <!-- keep 30 days' worth of history capped at 3GB total size --> + <maxHistory>30</maxHistory> + <totalSizeCap>3GB</totalSizeCap> + + </rollingPolicy> + <encoder> + <pattern>${defaultLoggerPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="EELFDebug" /> + </appender> + + + + + <logger name="org.onap.eelf" level="info" additivity="false"> + <appender-ref ref="asyncEELF" /> + </logger> + + <logger name="org.onap.eelf.audit" level="info" additivity="false"> + <appender-ref ref="asyncEELFAudit" /> + </logger> + + <logger name="org.onap.eelf.debug" level="debug" additivity="false"> + <appender-ref ref="asyncEELFDebug" /> + </logger> + + <logger name="org.onap.eelf.error" level="info" additivity="false"> + <appender-ref ref="asyncEELFError" /> + </logger> + + <logger name="org.onap.eelf.metrics" level="info" additivity="false"> + <appender-ref ref="asyncEELFMetrics" /> + </logger> + + <root level="DEBUG"> + <appender-ref ref="asyncEELF" /> + </root> + +</configuration> diff --git a/kubernetes/portal/resources/config/mariadb/oom_updates.sql b/kubernetes/portal/resources/config/mariadb/oom_updates.sql new file mode 100644 index 0000000000..781b04626c --- /dev/null +++ b/kubernetes/portal/resources/config/mariadb/oom_updates.sql @@ -0,0 +1,8 @@ +USE portal; +/* +Any updates required by OOM to the portaldb are made here. +1. split up SDC-FE and SDC-BE. Originally both FE and BE point to the same IP +while the OOM K8s version has these service split up. +*/ +UPDATE fn_app SET app_rest_endpoint = 'http://sdc.api.be.simpledemo.onap.org:8080/api/v2' where app_name = 'SDC'; +UPDATE fn_app SET app_url = 'http://cli.api.simpledemo.onap.org:8080', app_type = 1 where app_name='CLI'; diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties new file mode 100755 index 0000000000..876c5c7b9a --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties @@ -0,0 +1,46 @@ +# domain settings +#domain_class_location = + +# validator settings +#default_error_message = Default error message + +login_url_no_ret_val = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm + +user_attribute_name = user + +# User Session settings +roles_attribute_name = roles +role_functions_attribute_name = role_functions + +# menu settings +menu_query_name = menuData +application_menu_set_name = APP +application_menu_attribute_name = applicationMenuData +business_direct_menu_set_name = BD +business_direct_menu_attribute_name = businessDirectMenuData + +# ECOMP settings +ecomp_app_id = 1 +# Role settings +sys_admin_role_id = 1 +account_admin_role_id = 999 +restricted_app_role_id = 900 + +# Home Page index html +home_page = /index.html + +authentication_mechanism =DBAUTH + +login.error.hrid.empty = Login failed, please contact system administrator. +login.error.hrid.not-found = User not found, please contact system administrator. +login.error.user.inactive = Account is disabled, please contact system administrator. + +# +# Number of seconds to poll health (database operational, etc.) +# +health_poll_interval_seconds = 5 +# +# If a component is down a log entry will be written that triggers an alert. This parameter specifies how often this alert should be triggered +# if the component remains down. For example a value of 30, would translate to 30 * 60 seconds = 1800 seconds, or every 30 minutes +# +health_fail_alert_every_x_intervals = 30 diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties new file mode 100755 index 0000000000..2a33551933 --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties @@ -0,0 +1,3 @@ +authentication_server_url = http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/ +ecomp_openid_connect_client = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/openid_connect_login +ecomp_redirect_uri = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/welcome.htm diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/portal.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/portal.properties new file mode 100755 index 0000000000..4871b42288 --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/portal.properties @@ -0,0 +1,24 @@ +# Not used by portal +portal.api.impl.class = org.onap.portalsdk.core.onboarding.client.OnBoardingApiServiceImpl.not.used.by.portal +portal.api.prefix = /api +max.idle.time = 5 +user.attribute.name = user_attribute + +# for single sign on +ecomp_redirect_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm + +# URL of the ECOMP Portal REST API +ecomp_rest_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/auxapi + +ueb_listeners_enable = true + +ueb_app_key = 7GkVcrO6sIDb3ngW +ueb_app_secret = uCYgKjWKK5IxPGNNZzYSSWo9 +ueb_app_mailbox_name = ECOMP-PORTAL-INBOX + +ueb_url_list = dmaap.onap-message-router +ecomp_portal_inbox_name = ECOMP-PORTAL-INBOX + +# Consumer group name for UEB topic. +# Use the special tag to generate a unique one for each sdk-app server. +ueb_app_consumer_group_name = {UUID} diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/system.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/system.properties new file mode 100755 index 0000000000..9085cee47f --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/system.properties @@ -0,0 +1,100 @@ +#mysql +db.driver = org.mariadb.jdbc.Driver +db.connectionURL = jdbc:mariadb:failover://portaldb.onap-portal:3306/portal +db.userName =root +db.password =Aa123456 +db.hib.dialect = org.hibernate.dialect.MySQLDialect +db.min_pool_size = 5 +db.max_pool_size = 10 +hb.dialect = org.hibernate.dialect.MySQLDialect +hb.show_sql = false +hb.db_reconnect = true +hb.idle_connection_test_period = 3600 + +app_display_name = Portal +files_path = /tmp +context_root = ECOMPPORTAL +# menu settings +menu_query_name = menuData +menu_properties_file_location = /WEB-INF/fusion/menu/ +application_menu_set_name = APP +application_menu_attribute_name = applicationMenuData +application_menu_properties_name = menu.properties +business_direct_menu_set_name = BD +business_direct_menu_properties_name = bd.menu.properties +business_direct_menu_attribute_name = businessDirectMenuData + +application_user_id = 30000 +post_default_role_id = 1 + +#Enable Fusion Mobile capabilities for the application +mobile_enable = false + +cache_config_file_path = /WEB-INF/conf/cache.ccf +cache_switch = 1 +cache_load_on_startup = false + +user_name = fullName +decryption_key = AGLDdG4D04BKm2IxIWEr8o== + + +#Cron Schedules +cron_site_name = one +log_cron = 0 * * * * ? * +sessiontimeout_feed_cron = 0 0/5 * * * ? * + +#Front end URL +frontend_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/applicationsHome + +#cookie domain +cookie_domain = onap.org + +# An Unqiue 128-bit value defined to indentify a specific version of +# ECOMP Portal deployed on a specific virtual machine. +# This value must be generated and updated at the time of +# the deployment. +# Online Unique UUID generator - https://www.uuidgenerator.net/ +instance_uuid = 90bc9497-10e6-49fe-916b-dcdfaa972383 + +elastic_search_url = http:// +contact_us_link = http:// +user_guide_link = http:// + +# Contact Us page properties +ush_ticket_url = http:// +feedback_email_address = portal@lists.onap.org +portal_info_url = https:// + +#Online user bar refresh interval, in seconds +online_user_update_rate = 30 + +#Online user bar refresh total duration, in seconds +online_user_update_duration = 300 + +#authenticate user server +authenticate_user_server=http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/allUsers + +#window width threshold to collapse left/right menu when page onload +window_width_threshold_left_menu = 1400 +window_width_threshold_right_menu = 1350 + +# User notification refresh interval and duration, in seconds +notification_update_rate = 90 +notification_update_duration = 900 + +#Microservices Related Properties for Portal +microservices.widget.protocol = http +microservices.widget.hostname = portalwidgets.onap-portal +microservices.widget.username = widget_user +microservices.widget.password = KpuqIB08YHg+btG+pjX+sA== +#This property won't be needed after consul is functional on VMs - +microservices.widget.local.port = 8082 +microservices.m-learn.local.port = 8083 +#HALO API enable flag +external_access_enable = false + +#delete auditlog from number of days ago +auditlog_del_day_from = 365 + +#External system notification URL +external_system_notification_url= https://jira.onap.org/browse/ diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties new file mode 100644 index 0000000000..8ee0a95f74 --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties @@ -0,0 +1,35 @@ +# login settings +login_method_backdoor = backdoor +login_method_attribute_name = login_method + +# These properties will be removed after SingleSignOnController is cleaned +authentication_mechanism = BOTH +login_method_csp = csp +login_method_web_junction = web_junction + +#login message +login.error.hrid.empty = Login failed, please contact system administrator. +login.error.hrid.not-found = User not found, please contact system administrator. +login.error.user.inactive = Account is disabled, please contact system administrator. + +# User Session settings +user_attribute_name = user +roles_attribute_name = roles +role_function_list = role_function_list +role_functions_attribute_name = role_functions + +# Import-user LDAP settings +post_initial_context_factory = com.sun.jndi.ldap.LdapCtxFactory +post_provider_url = ldap://ldap.mycompany.com:389 +post_security_principal = ou=people,o=mycompany,c=us +post_max_result_size = 499 + +# menu settings +menu_query_name = menuData +application_menu_set_name = APP +application_menu_attribute_name = applicationMenuData +business_direct_menu_set_name = BD +business_direct_menu_attribute_name = businessDirectMenuData + +# Role settings +sys_admin_role_id = 1 diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties new file mode 100755 index 0000000000..e77a701798 --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties @@ -0,0 +1,45 @@ +# Properties read by ECOMP Framework library, ecompFW.jar + +########################################################################## +# The following properties should NOT be changed by partner applications. +########################################################################## + +portal.api.prefix = /api +max.idle.time = 5 +user.attribute.name = user_attribute + +#Use REST API instead of UEB to fetch the functional menu data +use_rest_for_functional_menu=true + +########################################################################## +# The following properties MUST be changed by partner applications. +########################################################################## + +# Name of java class that implements the OnBoardingApiService interface. +# epsdk 1.3 uses org.onap prefix +portal.api.impl.class = org.onap.portalapp.service.OnBoardingApiServiceImpl + +# CSP Global Log On for single sign on +ecomp_redirect_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm + +# URL of the ECOMP Portal REST API + +ecomp_rest_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/auxapi + +# Applications do not need to run a UEB listener in 1610. +ueb_listeners_enable = false + +# UEB Configuration +ueb_url_list = dmaap.onap-message-router +# ECOMP Portal listens on this UEB topic +ecomp_portal_inbox_name = ECOMP-PORTAL-INBOX +# Replace these 3 default values with the ones for your specific App, +# as shown on the on-boarding page on the ECOMP Portal web application. +ueb_app_key = jQd4a9zVNi4ePyBp +ueb_app_secret = P0HpqEBhKJvxjRYdw2sCTUll +ueb_app_mailbox_name = ECOMP-PORTAL-OUTBOX-APP1 +# Consumer group name for UEB topic. +# Use the special tag '{UUID}' to generate a unique one for each sdk-app server. +ueb_app_consumer_group_name = {UUID} + +decryption_key = AGLDdG4D04BKm2IxIWEr8o== diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties new file mode 100755 index 0000000000..d638abcca3 --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties @@ -0,0 +1,64 @@ +# Properties read by ECOMP Core library, ecompSDK-core.jar + +########################################################################## +# The following properties should NOT be changed by partner applications. +########################################################################## + +application_user_id = 30000 +post_default_role_id = 16 +clustered = true + +#Enable Fusion Mobile capabilities for the application +mobile_enable = false + +# Cache config file is needed on the classpath +cache_config_file_path = /WEB-INF/classes/cache.ccf +cache_switch = 199 +cache_load_on_startup = false + +user_name = fullName +decryption_key = AGLDdG4D04BKm2IxIWEr8o== + +########################################################################## +# The following properties MAY require changes by partner applications. +########################################################################## + +db.driver = org.mariadb.jdbc.Driver +db.connectionURL = jdbc:mariadb://portaldb.onap-portal:3306/ecomp_sdk +db.userName = root +db.password = Aa123456 +db.min_pool_size = 5 +db.max_pool_size = 10 +hb.dialect = org.hibernate.dialect.MySQLDialect +# SQL statements are logged to stdout +hb.show_sql = true +hb.idle_connection_test_period = 3600 + +app_display_name = Demo App +files_path = /tmp + +#element map files +element_map_file_path = /tmp +element_map_icon_path = app/fusionapp/icons/ + +#Cron Schedules +log_cron = 0 0/1 * * * ?; +mylogins_feed_cron = 0 0/60 * * * ?; +#sessiontimeout_feed_cron = 0 * * * * ? * +my_login_feed_output_dir = /tmp/MyLogins + +# Link shown in Help menu +contact_us_link = https://todo_contact_us_link.com + +# An Unique 128-bit value defined to identify a specific version +# of an application deployed on a specific virtual machine. +# This value must be generated and updated by the application +# which is using the ECOMP SDK at the time of its deployment. +# Online Unique UUID generator - https://www.uuidgenerator.net/ +instance_uuid=8da691c9-987d-43ed-a358-00ac2f35685d + +# R Cloud feature - configure this property to enable notebook feature - for more details on RCloud please visit https://rcloud.social/index.html +guard_notebook_url= + +#authenticate user server +authenticate_user_server=http://portalapps.onap-portal:8383/openid-connect-server-webapp/allUsers diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties new file mode 100644 index 0000000000..a5e55dc6d8 --- /dev/null +++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties @@ -0,0 +1,35 @@ +## General App Properties +server.contextPath=/widget +server.port=8082 +spring.http.multipart.max-file-size=128MB +spring.http.multipart.max-request-size=128MB +microservice.widget.location=/tmp + +## App DB Properties +spring.datasource.url=jdbc:mysql://portaldb.onap-portal:3306/portal +spring.datasource.username=root +spring.datasource.password=Aa123456 +spring.jpa.properties.hibernate.dialect=org.hibernate.dialect.MySQLDialect +spring.database.driver.classname=org.mariadb.jdbc.Driver +spring.jpa.show-sql=false +spring.jpa.properties.hibernate.format_sql=false + +## Basic Authentication Properties +security.user.name=widget_user +security.user.password=ENC(IjywcRnI9+nuVEh9+OFFiRWAjBT1n718) + +initialization.default.widgets=true +initialization.widgetData.url=http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/commonWidgets + +## Account Basic Authentication Properties +account.user.name=portal +account.user.password=6APqvG4AU2rfLgCvMdySwQ== + +## Certificate Properties +#server.ssl.key-store=classpath:widget-keystore.p12 +#server.ssl.key-store-password=ENC(DiIYnAMab4u7rEW2yKhF9zBL00uU55q8) +#server.ssl.keyStoreType=PKCS12 +#server.ssl.keyAlias=widget-microservice + +## Jasypt Properties +jasypt.encryptor.password=EncryptionKey |