6 files changed, 9 insertions, 288 deletions
diff --git a/kubernetes/policy/templates/NOTES.txt b/kubernetes/policy/templates/NOTES.txt
deleted file mode 100644
index fa0aa7d258..0000000000
--- a/kubernetes/policy/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/policy/templates/configmap.yaml b/kubernetes/policy/templates/configmap.yaml
index 8c804c35ed..2537e477ea 100644..100755
--- a/kubernetes/policy/templates/configmap.yaml
+++ b/kubernetes/policy/templates/configmap.yaml
@@ -1,5 +1,5 @@
 # Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
+# Modifications Copyright © 2018, 2020 AT&T Intellectual Property
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -16,31 +16,12 @@
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: {{ include "common.fullname" . }}-log-configmap
-  namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/log/xacml-pap-rest/logback.xml").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-sdk-log-configmap
-  namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/log/ep_sdk_app/logback.xml").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-pe-configmap
-  namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/pe/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
   name: {{ include "common.fullname" . }}-db-configmap
   namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
 data:
 {{ tpl (.Files.Glob "resources/config/db.sh").AsConfig . | indent 2 }}
diff --git a/kubernetes/policy/templates/deployment.yaml b/kubernetes/policy/templates/deployment.yaml
deleted file mode 100644
index 73493056b7..0000000000
--- a/kubernetes/policy/templates/deployment.yaml
+++ /dev/null
@@ -1,182 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - command:
-        - sh
-        args:
-        - -c
-        - "cd /config-input && for PFILE in `ls -1 *.conf`; do envsubst <${PFILE} >/config/${PFILE}; done"
-        env:
-        - name: JDBC_USER
-          {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 10 }}
-        - name: JDBC_PASSWORD
-          {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 10 }}
-        volumeMounts:
-        - mountPath: /config-input
-          name: pe
-        - mountPath: /config
-          name: pe-processed
-        image: "{{ .Values.global.envsubstImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: {{ include "common.name" . }}-update-config
-      - command:
-        - /root/ready.py
-        args:
-        - --container-name
-        - {{ include "common.release" . }}-galera-config
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: {{ include "common.name" . }}-readiness
-      containers:
-        - command:
-          - /bin/bash
-          - ./do-start.sh
-          - pap
-          name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          resources:
-{{ include "common.resources" . | indent 12 }}
-          ports:
-          - containerPort: {{ .Values.service.externalPort }}
-          - containerPort: {{ .Values.service.externalPort2 }}
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.externalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end -}}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.externalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: PRELOAD_POLICIES
-            value: "{{ .Values.config.preloadPolicies }}"
-          volumeMounts:
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /tmp/policy-install/config/pap-tweaks.sh
-            name: pe-pap
-            subPath: pap-tweaks.sh
-          - mountPath: /tmp/policy-install/config/paplp.conf
-            name: pe-pap
-            subPath: paplp.conf
-          - mountPath: /tmp/policy-install/config/pap.conf
-            name: pe-pap
-            subPath: pap.conf
-          - mountPath: /tmp/policy-install/config/mysql.conf
-            name: pe-pap
-            subPath: mysql.conf
-          - mountPath: /tmp/policy-install/config/elk.conf
-            name: pe-pap
-            subPath: elk.conf
-          - mountPath: /tmp/policy-install/config/console.conf
-            name: pe-pap
-            subPath: console.conf
-          - mountPath: /tmp/policy-install/config/base.conf
-            name: pe-processed
-            subPath: base.conf
-          - mountPath: /tmp/policy-install/do-start.sh
-            name: pe-scripts
-            subPath: do-start.sh
-          - mountPath: /var/log/onap
-            name: policy-logs
-          - mountPath: /tmp/policy-install/logback.xml
-            name: policy-sdk-logback
-            subPath: logback.xml
-          - mountPath: /tmp/logback.xml
-            name: policy-logback
-            subPath: logback.xml
-          lifecycle:
-            postStart:
-              exec:
-                command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/opt/app/policy/servers/pap/webapps/pap/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; export SRC=/tmp/policy-install/logback.xml; export DST=/opt/app/policy/servers/console/webapps/onap/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
-        - image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.global.loggingImage | default .Values.loggingImage }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          name: filebeat-onap
-          volumeMounts:
-          - mountPath: /usr/share/filebeat/filebeat.yml
-            name: filebeat-conf
-            subPath: filebeat.yml
-          - mountPath: /var/log/onap
-            name: policy-logs
-          - mountPath: /usr/share/filebeat/data
-            name: policy-data-filebeat
-      volumes:
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: filebeat-conf
-          configMap:
-            name: {{ include "common.release" . }}-filebeat-configmap
-        - name: policy-logs
-          emptyDir: {}
-        - name: policy-data-filebeat
-          emptyDir: {}
-        - name: policy-logback
-          configMap:
-            name: {{ include "common.fullname" . }}-log-configmap
-        - name: policy-sdk-logback
-          configMap:
-            name: {{ include "common.fullname" . }}-sdk-log-configmap
-        - name: pe
-          configMap:
-            name: {{ include "common.release" . }}-pe-configmap
-            defaultMode: 0755
-        - name: pe-scripts
-          configMap:
-            name: {{ include "common.release" . }}-pe-scripts-configmap
-            defaultMode: 0777
-        - name: pe-pap
-          configMap:
-            name: {{ include "common.fullname" . }}-pe-configmap
-            defaultMode: 0755
-        - name: pe-processed
-          emptyDir:
-            medium: Memory
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/policy/templates/job.yaml b/kubernetes/policy/templates/job.yaml
index f6a1ace3dc..57e363bf8d 100644..100755
--- a/kubernetes/policy/templates/job.yaml
+++ b/kubernetes/policy/templates/job.yaml
@@ -1,4 +1,5 @@
 # Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2020 AT&T Intellectual Property
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -15,7 +16,7 @@
 apiVersion: batch/v1
 kind: Job
 metadata:
-  name: {{ include "common.release" . }}-galera-config
+  name: {{ include "common.release" . }}-policy-galera-config
   namespace: {{ include "common.namespace" . }}
   labels:
     app: {{ include "common.name" . }}-job
@@ -43,7 +44,7 @@ spec:
               apiVersion: v1
               fieldPath: metadata.namespace
       containers:
-      - name: {{ include "common.release" . }}-galera-config
+      - name: {{ include "common.release" . }}-policy-galera-config
         image: {{ .Values.mariadb_image }}
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
         volumeMounts:
diff --git a/kubernetes/policy/templates/secrets.yaml b/kubernetes/policy/templates/secrets.yaml
index c1f98ba3cc..c1f98ba3cc 100644..100755
--- a/kubernetes/policy/templates/secrets.yaml
+++ b/kubernetes/policy/templates/secrets.yaml
diff --git a/kubernetes/policy/templates/service.yaml b/kubernetes/policy/templates/service.yaml
deleted file mode 100644
index 9f4ad9bed4..0000000000
--- a/kubernetes/policy/templates/service.yaml
+++ /dev/null
@@ -1,46 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018-2019 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort }}
-    - port: {{ .Values.service.externalPort2 }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort2 }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort }}
-    - port: {{ .Values.service.externalPort2 }}
-      targetPort: {{ .Values.service.internalPort2 }}
-      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort2 }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}