aboutsummaryrefslogtreecommitdiffstats
path: root/kubernetes/policy/charts/policy-common
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/policy/charts/policy-common')
-rw-r--r--kubernetes/policy/charts/policy-common/Chart.yaml19
-rw-r--r--kubernetes/policy/charts/policy-common/requirements.yaml22
-rw-r--r--kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml55
-rw-r--r--kubernetes/policy/charts/policy-common/resources/config/pe/base.conf44
-rw-r--r--kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh100
-rw-r--r--kubernetes/policy/charts/policy-common/templates/NOTES.txt33
-rw-r--r--kubernetes/policy/charts/policy-common/templates/configmap.yaml38
-rw-r--r--kubernetes/policy/charts/policy-common/values.yaml81
8 files changed, 0 insertions, 392 deletions
diff --git a/kubernetes/policy/charts/policy-common/Chart.yaml b/kubernetes/policy/charts/policy-common/Chart.yaml
deleted file mode 100644
index 0af8e01b51..0000000000
--- a/kubernetes/policy/charts/policy-common/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Policy Common
-name: policy-common
-version: 6.0.0
diff --git a/kubernetes/policy/charts/policy-common/requirements.yaml b/kubernetes/policy/charts/policy-common/requirements.yaml
deleted file mode 100644
index d3c442d32e..0000000000
--- a/kubernetes/policy/charts/policy-common/requirements.yaml
+++ /dev/null
@@ -1,22 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
- - name: common
- version: ~6.x-0
- # local reference to common chart, as it is
- # a part of this chart's package and will not
- # be published independently to a repo (at this point)
- repository: '@local'
diff --git a/kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml b/kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml
deleted file mode 100644
index 258b654f6f..0000000000
--- a/kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml
+++ /dev/null
@@ -1,55 +0,0 @@
-# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/policy/charts/policy-common/resources/config/pe/base.conf b/kubernetes/policy/charts/policy-common/resources/config/pe/base.conf
deleted file mode 100644
index 810b090069..0000000000
--- a/kubernetes/policy/charts/policy-common/resources/config/pe/base.conf
+++ /dev/null
@@ -1,44 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada, AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-JAVA_HOME=/usr/local/openjdk-11
-POLICY_HOME=/opt/app/policy
-POLICY_LOGS=/var/log/onap
-KEYSTORE_PASSWD=Pol1cy_0nap
-TRUSTSTORE_PASSWD=Pol1cy_0nap
-
-JDBC_DRIVER=org.mariadb.jdbc.Driver
-JDBC_URL=jdbc:mariadb://{{ .Values.global.mariadb.service.name }}:{{ .Values.global.mariadb.service.internalPort }}/onap_sdk?connectTimeout=30000&socketTimeout=60000&log=true&sessionVariables=max_statement_time=30
-JDBC_LOG_URL=jdbc:mariadb://{{ .Values.global.mariadb.service.name }}:{{ .Values.global.mariadb.service.internalPort }}/log?connectTimeout=30000&socketTimeout=60000&log=true&sessionVariables=max_statement_time=30
-
-JDBC_USER=${JDBC_USER}
-JDBC_PASSWORD=${JDBC_PASSWORD}
-
-site_name=site_1
-fp_monitor_interval=30
-failed_counter_threshold=3
-test_trans_interval=20
-write_fpc_interval=5
-max_fpc_update_interval=60
-test_via_jmx=false
-jmx_fqdn=
-
-AAF_NAMESPACE=org.onap.policy
-AAF_HOST=aaf-locate.{{.Release.Namespace}}
-
-ENVIRONMENT=TEST
-
-#Micro Service Model Properties
-policy_msOnapName=
-policy_msPolicyName=
diff --git a/kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh b/kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh
deleted file mode 100644
index ee427af678..0000000000
--- a/kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/bash
-
-# Copyright © 2017 Amdocs, Bell Canada, AT&T
-# Modifications Copyright © 2020 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-# Script to configure and start the Policy components that are to run in the designated container,
-# It is intended to be used as the entrypoint in the Dockerfile, so the last statement of the
-# script just goes into a long sleep so that the script does not exit (which would cause the
-# container to be torn down).
-
-container=$1
-
-case $container in
-pap)
- comps="base pap paplp console mysql elk"
- ;;
-pdp)
- comps="base pdp pdplp"
- ;;
-brmsgw)
- comps="base brmsgw"
- ;;
-*)
- echo "Usage: do-start.sh pap|pdp|brmsgw" >&2
- exit 1
-esac
-
-
-# skip installation if build.info file is present (restarting an existing container)
-if [[ -f /opt/app/policy/etc/build.info ]]; then
- echo "Found existing installation, will not reinstall"
- . /opt/app/policy/etc/profile.d/env.sh
-
-else
- if [[ -d config ]]; then
- cp config/*.conf .
- fi
-
- for comp in $comps; do
- echo "Installing component: $comp"
- ./docker-install.sh --install $comp
- done
- for comp in $comps; do
- echo "Configuring component: $comp"
- ./docker-install.sh --configure $comp
- done
-
- . /opt/app/policy/etc/profile.d/env.sh
-
- # install keystore
- # override the policy keystore and truststore if present
- if [[ -f config/policy-keystore ]]; then
- cp config/policy-keystore $POLICY_HOME/etc/ssl
- fi
-
- if [[ -f config/policy-truststore ]]; then
- cp -f config/policy-truststore $POLICY_HOME/etc/ssl
- fi
-
- if [[ -f config/$container-tweaks.sh ]] ; then
- # file may not be executable; running it as an
- # argument to bash avoids needing execute perms.
- bash config/$container-tweaks.sh
- fi
-
- if [[ $container == pap ]]; then
- # wait for DB up
- # now that DB is up, invoke database upgrade
- # (which does nothing if the db is already up-to-date)
- if [[ -v JDBC_USER ]]; then
- dbuser=${JDBC_USER};
- else
- dbuser=$(echo $(grep '^JDBC_USER=' base.conf | cut -f2 -d=))
- fi
-
- if [[ -v JDBC_PASSWORD ]]; then
- dbpw=${JDBC_PASSWORD}
- else
- dbpw=$(echo $(grep '^JDBC_PASSWORD=' base.conf | cut -f2 -d=))
- fi
- db_upgrade_remote.sh $dbuser $dbpw {{.Values.global.mariadb.service.name}}
- fi
-
-fi
-
-policy.sh start
-sleep 1000d
diff --git a/kubernetes/policy/charts/policy-common/templates/NOTES.txt b/kubernetes/policy/charts/policy-common/templates/NOTES.txt
deleted file mode 100644
index fa0aa7d258..0000000000
--- a/kubernetes/policy/charts/policy-common/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/policy/charts/policy-common/templates/configmap.yaml b/kubernetes/policy/charts/policy-common/templates/configmap.yaml
deleted file mode 100644
index 4aed50976c..0000000000
--- a/kubernetes/policy/charts/policy-common/templates/configmap.yaml
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.release" . }}-pe-configmap
- namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/pe/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.release" . }}-pe-scripts-configmap
- namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/scripts/do-start.sh").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.release" . }}-filebeat-configmap
- namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
diff --git a/kubernetes/policy/charts/policy-common/values.yaml b/kubernetes/policy/charts/policy-common/values.yaml
deleted file mode 100644
index 57eacc56f0..0000000000
--- a/kubernetes/policy/charts/policy-common/values.yaml
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- readinessRepository: oomk8s
- readinessImage: readiness-check:2.0.2
- loggingRepository: docker.elastic.co
- loggingImage: beats/filebeat:5.5.0
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-config:
- logstashServiceName: log-ls
- logstashPort: 5044
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- type: NodePort
- name: <onap-app>
- externalPort: <8080>
- #Example internal target port if required
- #internalPort: <80>
- nodePort: <replace with unused node port suffix eg. 23>
-
-ingress:
- enabled: false
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi