diff options
Diffstat (limited to 'kubernetes/policy/charts/policy-common')
8 files changed, 348 insertions, 0 deletions
diff --git a/kubernetes/policy/charts/policy-common/Chart.yaml b/kubernetes/policy/charts/policy-common/Chart.yaml new file mode 100644 index 0000000000..be8724932c --- /dev/null +++ b/kubernetes/policy/charts/policy-common/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Policy Common +name: policy-common +version: 2.0.0 diff --git a/kubernetes/policy/charts/policy-common/requirements.yaml b/kubernetes/policy/charts/policy-common/requirements.yaml new file mode 100644 index 0000000000..f639633537 --- /dev/null +++ b/kubernetes/policy/charts/policy-common/requirements.yaml @@ -0,0 +1,21 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~2.0.0 + # local reference to common chart, as it is + # a part of this chart's package and will not + # be published independently to a repo (at this point) + repository: '@local' diff --git a/kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml b/kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml new file mode 100644 index 0000000000..b0d4690754 --- /dev/null +++ b/kubernetes/policy/charts/policy-common/resources/config/log/filebeat/filebeat.yml @@ -0,0 +1,41 @@ +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/policy/charts/policy-common/resources/config/pe/base.conf b/kubernetes/policy/charts/policy-common/resources/config/pe/base.conf new file mode 100644 index 0000000000..c335d4acab --- /dev/null +++ b/kubernetes/policy/charts/policy-common/resources/config/pe/base.conf @@ -0,0 +1,38 @@ +# Copyright © 2017 Amdocs, Bell Canada, AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64 +POLICY_HOME=/opt/app/policy +KEYSTORE_PASSWD=PolicyR0ck$ + +JDBC_DRIVER=org.mariadb.jdbc.Driver +JDBC_URL=jdbc:mariadb://{{ .Release.Name }}-{{ .Values.global.mariadb.nameOverride }}:{{.Values.config.mariadbPort}}/onap_sdk?failOverReadOnly=false&autoReconnect=true +JDBC_LOG_URL=jdbc:mariadb://{{ .Release.Name }}-{{ .Values.global.mariadb.nameOverride }}:{{.Values.config.mariadbPort}}/log?failOverReadOnly=false&autoReconnect=true +JDBC_USER=policy_user +JDBC_PASSWORD=policy_user + +site_name=site_1 +fp_monitor_interval=30 +failed_counter_threshold=3 +test_trans_interval=20 +write_fpc_interval=5 +max_fpc_update_interval=60 +test_via_jmx=false +jmx_fqdn= + +ENVIRONMENT=TEST + +#Micro Service Model Properties +policy_msOnapName= +policy_msPolicyName= diff --git a/kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh b/kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh new file mode 100644 index 0000000000..35842e4859 --- /dev/null +++ b/kubernetes/policy/charts/policy-common/resources/config/scripts/do-start.sh @@ -0,0 +1,92 @@ +# Copyright © 2017 Amdocs, Bell Canada, AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +#!/bin/bash + +# Script to configure and start the Policy components that are to run in the designated container, +# It is intended to be used as the entrypoint in the Dockerfile, so the last statement of the +# script just goes into a long sleep so that the script does not exit (which would cause the +# container to be torn down). + +container=$1 + +case $container in +pap) + comps="base pap paplp console mysql elk" + ;; +pdp) + comps="base pdp pdplp" + ;; +brmsgw) + comps="base brmsgw" + ;; +*) + echo "Usage: do-start.sh pap|pdp|brmsgw" >&2 + exit 1 +esac + + +# skip installation if build.info file is present (restarting an existing container) +if [[ -f /opt/app/policy/etc/build.info ]]; then + echo "Found existing installation, will not reinstall" + . /opt/app/policy/etc/profile.d/env.sh + +else + if [[ -d config ]]; then + cp config/*.conf . + fi + + for comp in $comps; do + echo "Installing component: $comp" + ./docker-install.sh --install $comp + done + for comp in $comps; do + echo "Configuring component: $comp" + ./docker-install.sh --configure $comp + done + + . /opt/app/policy/etc/profile.d/env.sh + + # install keystore + #changed to use http instead of http, so keystore no longer needed + #cp config/policy-keystore.jks $POLICY_HOME/etc/ssl/policy-keystore + + if [[ -f config/$container-tweaks.sh ]] ; then + # file may not be executable; running it as an + # argument to bash avoids needing execute perms. + bash config/$container-tweaks.sh + fi + + if [[ $container == pap ]]; then + # wait for DB up + # now that DB is up, invoke database upgrade + # (which does nothing if the db is already up-to-date) + dbuser=$(echo $(grep '^JDBC_USER=' base.conf | cut -f2 -d=)) + dbpw=$(echo $(grep '^JDBC_PASSWORD=' base.conf | cut -f2 -d=)) + db_upgrade_remote.sh $dbuser $dbpw {{.Release.Name}}-{{.Values.global.mariadb.nameOverride}} + fi + +fi + +policy.sh start + +# on pap, wait for pap, pdp, brmsgw, nexus and drools up, +# then push the initial default policies +if [[ $container == pap ]]; then + # wait addional 1 minute for all processes to get fully initialized and synched up + sleep 60 + bash -xv config/push-policies.sh +fi + +sleep 1000d diff --git a/kubernetes/policy/charts/policy-common/templates/NOTES.txt b/kubernetes/policy/charts/policy-common/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/policy/charts/policy-common/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/policy/charts/policy-common/templates/configmap.yaml b/kubernetes/policy/charts/policy-common/templates/configmap.yaml new file mode 100644 index 0000000000..23311c66f5 --- /dev/null +++ b/kubernetes/policy/charts/policy-common/templates/configmap.yaml @@ -0,0 +1,37 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-pe-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/pe/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-pe-scripts-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/scripts/do-start.sh").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-filebeat-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }} diff --git a/kubernetes/policy/charts/policy-common/values.yaml b/kubernetes/policy/charts/policy-common/values.yaml new file mode 100644 index 0000000000..3cee7cc7af --- /dev/null +++ b/kubernetes/policy/charts/policy-common/values.yaml @@ -0,0 +1,82 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: + logstashServiceName: log-ls + logstashPort: 5044 + mariadbPort: 3306 + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + type: NodePort + name: <onap-app> + externalPort: <8080> + #Example internal target port if required + #internalPort: <80> + nodePort: <replace with unused node port suffix eg. 23> + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi |