aboutsummaryrefslogtreecommitdiffstats
path: root/kubernetes/multicloud/charts
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/multicloud/charts')
-rw-r--r--kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt34
-rw-r--r--kubernetes/multicloud/charts/multicloud-ocata/values.yaml3
-rw-r--r--kubernetes/multicloud/charts/multicloud-vio/templates/NOTES.txt34
-rw-r--r--kubernetes/multicloud/charts/multicloud-vio/values.yaml3
-rw-r--r--kubernetes/multicloud/charts/multicloud-windriver/templates/NOTES.txt34
-rw-r--r--kubernetes/multicloud/charts/multicloud-windriver/values.yaml3
6 files changed, 111 insertions, 0 deletions
diff --git a/kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt b/kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt
new file mode 100644
index 0000000000..befedf4578
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-ocata/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml
index db0397561a..a1f72eabcc 100644
--- a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml
+++ b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml
@@ -60,6 +60,9 @@ service:
internalPort: 9006
nodePort: 93
+ingress:
+ enabled: false
+
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
diff --git a/kubernetes/multicloud/charts/multicloud-vio/templates/NOTES.txt b/kubernetes/multicloud/charts/multicloud-vio/templates/NOTES.txt
new file mode 100644
index 0000000000..befedf4578
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-vio/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/multicloud/charts/multicloud-vio/values.yaml b/kubernetes/multicloud/charts/multicloud-vio/values.yaml
index 187f2b9562..4fea235b5b 100644
--- a/kubernetes/multicloud/charts/multicloud-vio/values.yaml
+++ b/kubernetes/multicloud/charts/multicloud-vio/values.yaml
@@ -60,6 +60,9 @@ service:
internalPort: 9004
nodePort: 92
+ingress:
+ enabled: false
+
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
diff --git a/kubernetes/multicloud/charts/multicloud-windriver/templates/NOTES.txt b/kubernetes/multicloud/charts/multicloud-windriver/templates/NOTES.txt
new file mode 100644
index 0000000000..befedf4578
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-windriver/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/multicloud/charts/multicloud-windriver/values.yaml b/kubernetes/multicloud/charts/multicloud-windriver/values.yaml
index 1126284f11..919289c65d 100644
--- a/kubernetes/multicloud/charts/multicloud-windriver/values.yaml
+++ b/kubernetes/multicloud/charts/multicloud-windriver/values.yaml
@@ -60,6 +60,9 @@ liveness:
failureThreshold: 5
enabled: true
+ingress:
+ enabled: false
+
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little