summaryrefslogtreecommitdiffstats
path: root/kubernetes/log/components
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/log/components')
-rw-r--r--kubernetes/log/components/Makefile59
-rw-r--r--kubernetes/log/components/log-elasticsearch/Chart.yaml29
-rw-r--r--kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml146
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/NOTES.txt33
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/configmap.yaml29
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/deployment.yaml114
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/ingress.yaml1
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/pv.yaml37
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/pvc.yaml38
-rw-r--r--kubernetes/log/components/log-elasticsearch/templates/service.yaml70
-rw-r--r--kubernetes/log/components/log-elasticsearch/values.yaml116
-rw-r--r--kubernetes/log/components/log-kibana/Chart.yaml29
-rw-r--r--kubernetes/log/components/log-kibana/resources/config/README.txt1
-rw-r--r--kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json0
-rw-r--r--kubernetes/log/components/log-kibana/resources/config/kibana.yml129
-rw-r--r--kubernetes/log/components/log-kibana/templates/NOTES.txt32
-rw-r--r--kubernetes/log/components/log-kibana/templates/configmap.yaml29
-rw-r--r--kubernetes/log/components/log-kibana/templates/deployment.yaml116
-rw-r--r--kubernetes/log/components/log-kibana/templates/ingress.yaml1
-rw-r--r--kubernetes/log/components/log-kibana/templates/service.yaml43
-rw-r--r--kubernetes/log/components/log-kibana/values.yaml100
-rw-r--r--kubernetes/log/components/log-logstash/Chart.yaml29
-rw-r--r--kubernetes/log/components/log-logstash/resources/config/logstash.yml32
-rw-r--r--kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf276
-rw-r--r--kubernetes/log/components/log-logstash/templates/NOTES.txt32
-rw-r--r--kubernetes/log/components/log-logstash/templates/configmap.yaml29
-rw-r--r--kubernetes/log/components/log-logstash/templates/deployment.yaml104
-rw-r--r--kubernetes/log/components/log-logstash/templates/ingress.yaml1
-rw-r--r--kubernetes/log/components/log-logstash/templates/service.yaml70
-rw-r--r--kubernetes/log/components/log-logstash/values.yaml102
30 files changed, 0 insertions, 1827 deletions
diff --git a/kubernetes/log/components/Makefile b/kubernetes/log/components/Makefile
deleted file mode 100644
index f09e21e75c..0000000000
--- a/kubernetes/log/components/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-# Copyright © 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-OUTPUT_DIR := $(ROOT_DIR)/../../dist
-PACKAGE_DIR := $(OUTPUT_DIR)/packages
-SECRET_DIR := $(OUTPUT_DIR)/secrets
-
-EXCLUDES :=
-HELM_BIN := helm
-ifneq ($(SKIP_LINT),TRUE)
- HELM_LINT_CMD := $(HELM_BIN) lint
-else
- HELM_LINT_CMD := echo "Skipping linting of"
-endif
-
-HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
-HELM_VER := $(shell $(HELM_BIN) version --template "{{.Version}}")
-
-.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-
-all: $(HELM_CHARTS)
-
-$(HELM_CHARTS):
- @echo "\n[$@]"
- @make package-$@
-
-make-%:
- @if [ -f $*/Makefile ]; then make -C $*; fi
-
-dep-%: make-%
- @if [ -f $*/Chart.yaml ]; then $(HELM_BIN) dep up $*; fi
-
-lint-%: dep-%
- @if [ -f $*/Chart.yaml ]; then $(HELM_LINT_CMD) $*; fi
-
-package-%: lint-%
- @mkdir -p $(PACKAGE_DIR)
- @if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$($(HELM_BIN) package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && $(HELM_BIN) cm-push -f $$PACKAGE_NAME local; fi
- @sleep 3
- #@$(HELM_BIN) repo index $(PACKAGE_DIR)
-
-clean:
- @rm -f */Chart.lock
- @rm -f *tgz */charts/*tgz
- @rm -rf $(PACKAGE_DIR)
-%:
- @:
diff --git a/kubernetes/log/components/log-elasticsearch/Chart.yaml b/kubernetes/log/components/log-elasticsearch/Chart.yaml
deleted file mode 100644
index fad4c67e45..0000000000
--- a/kubernetes/log/components/log-elasticsearch/Chart.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v2
-description: ONAP Logging Elasticsearch
-name: log-elasticsearch
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
diff --git a/kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml b/kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml
deleted file mode 100644
index d39fc97e0d..0000000000
--- a/kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml
+++ /dev/null
@@ -1,146 +0,0 @@
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ======================== Elasticsearch Configuration =========================
-#
-# NOTE: Elasticsearch comes with reasonable defaults for most settings.
-# Before you set out to tweak and tune the configuration, make sure you
-# understand what are you trying to accomplish and the consequences.
-#
-# The primary way of configuring a node is via this file. This template lists
-# the most important settings you may want to configure for a production cluster.
-#
-# Please consult the documentation for further information on configuration options:
-# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
-#
-# ---------------------------------- Cluster -----------------------------------
-#
-# Name of the Elasticsearch cluster.
-# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
-# The default name is elasticsearch, but you should change it to an appropriate name which describes the
-# purpose of the cluster.
-#
-cluster.name: "onap-log"
-#
-# The port that other nodes in the cluster should use when communicating with this node.
-# Required for Elasticsearch's nodes running on different cluster nodes.
-# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
-#transport.publish_port:$transport.publish_port
-#
-# The host address to publish for nodes in the cluster to connect to.
-# Required for Elasticsearch's nodes running on different cluster nodes.
-# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
-#transport.publish_host:$transport.publish_host
-#
-# ------------------------------------ Node ------------------------------------
-#
-# It is better to provide different meaningfull names fot different elastic nodes.
-# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id.
-# Note that the node id is persisted and does not change when a node restarts
-#
-#node.name: $node.name
-#
-# Add custom attributes to the node:
-#
-#node.attr.rack: r1
-#
-# ----------------------------------- Paths ------------------------------------
-#
-# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
-# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
-# may change & can deal to data loss.
-path.data: /usr/share/elasticsearch/data
-#
-# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
-# as on upgrading Elasticsearch, directory structure may change.
-path.logs: /usr/share/elasticsearch/logs
-#
-# ----------------------------------- Memory -----------------------------------
-#
-# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
-# Lock the memory on startup.
-#
-bootstrap.memory_lock: false
-#
-# Make sure that the heap size is set to about half the memory available
-# on the system and that the owner of the process is allowed to use this
-# limit.
-#
-# Elasticsearch performs poorly when the system is swapping the memory.
-#
-# ---------------------------------- Network -----------------------------------
-#
-# Set the bind address to a specific IP (IPv4 or IPv6):
-# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
-# non-loopback address.
-network.host: 0.0.0.0
-#
-# Set a custom port for HTTP: If required, default is 9200-9300
-#
-#http.port: $http.port
-#
-# For more information, consult the network module documentation.
-#
-# --------------------------------- Discovery ----------------------------------
-#
-# Pass an initial list of hosts to perform discovery when new node is started
-# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
-# that are likely to be live and contactable.
-# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
-# to connect to other nodes running on the same server.
-#
-#$discovery.zen.ping.unicast.hosts
-#
-# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes
-# available. Only then will an election take place.
-# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
-discovery.zen.minimum_master_nodes: 1
-#
-# For more information, consult the zen discovery module documentation.
-#
-# ---------------------------------- Gateway -----------------------------------
-#
-# Block initial recovery after a full cluster restart until N nodes are started:
-#
-#gateway.recover_after_nodes: 3
-#
-# For more information, consult the gateway module documentation.
-#
-# ---------------------------------- Various -----------------------------------
-#
-# Require explicit names when deleting indices:
-#
-#action.destructive_requires_name: true
-# Set a custom port for HTTP: If required, default is 9200-9300
-# This is used for REST APIs
-http.port: {{.Values.service.externalPort}}
-# Port to bind for communication between nodes. Accepts a single value or a range.
-# If a range is specified, the node will bind to the first available port in the range.
-# Defaults to 9300-9400.
-# More info:
-transport.tcp.port: {{.Values.service.externalPort2}}
-
-xpack.graph.enabled: false
-#Set to false to disable X-Pack graph features.
-
-xpack.ml.enabled: false
-#Set to false to disable X-Pack machine learning features.
-
-xpack.monitoring.enabled: false
-#Set to false to disable X-Pack monitoring features.
-
-xpack.security.enabled: false
-#Set to false to disable X-Pack security features.
-
-xpack.watcher.enabled: false
-#Set to false to disable Watcher.
diff --git a/kubernetes/log/components/log-elasticsearch/templates/NOTES.txt b/kubernetes/log/components/log-elasticsearch/templates/NOTES.txt
deleted file mode 100644
index ab908cd309..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/configmap.yaml b/kubernetes/log/components/log-elasticsearch/templates/configmap.yaml
deleted file mode 100644
index fe0349ede9..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/configmap.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-configmap
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/deployment.yaml b/kubernetes/log/components/log-elasticsearch/templates/deployment.yaml
deleted file mode 100644
index 3e815ca860..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/deployment.yaml
+++ /dev/null
@@ -1,114 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- initContainers:
- - command:
- - /bin/sh
- - -c
- - |
- sysctl -w vm.max_map_count=262144
- mkdir -p /logroot/elasticsearch/logs
- mkdir -p /logroot/elasticsearch/data
- chmod -R 777 /logroot/elasticsearch
- chown -R root:root /logroot
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- securityContext:
- privileged: true
- image: {{ include "repositoryGenerator.image.busybox" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: init-sysctl
- volumeMounts:
- - name: {{ include "common.fullname" . }}-logs
- mountPath: /logroot/
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.elasticRepository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- resources: {{ include "common.resources" . | nindent 12 }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- - containerPort: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name2 }}
-# disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort2 }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- env:
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
- name: {{ include "common.fullname" . }}-config
- subPath: elasticsearch.yml
- - mountPath: /usr/share/elasticsearch/data/
- name: {{ include "common.fullname" . }}-data
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: {{ include "common.fullname" . }}-config
- configMap:
- name: {{ include "common.fullname" . }}-configmap
- items:
- - key: elasticsearch.yml
- path: elasticsearch.yml
- - name: {{ include "common.fullname" . }}-data
- persistentVolumeClaim:
- claimName: {{ include "common.fullname" . }}
- - name: {{ include "common.fullname" . }}-logs
- hostPath:
- path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPathLogs }}
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/log/components/log-elasticsearch/templates/ingress.yaml b/kubernetes/log/components/log-elasticsearch/templates/ingress.yaml
deleted file mode 100644
index 8f87c68f1e..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/ingress.yaml
+++ /dev/null
@@ -1 +0,0 @@
-{{ include "common.ingress" . }}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/pv.yaml b/kubernetes/log/components/log-elasticsearch/templates/pv.yaml
deleted file mode 100644
index 9d4093db11..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/pv.yaml
+++ /dev/null
@@ -1,37 +0,0 @@
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-kind: PersistentVolume
-apiVersion: v1
-metadata:
- name: {{ include "common.fullname" . }}-data
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
- release: "{{ include "common.release" . }}"
- heritage: "{{ .Release.Service }}"
- name: {{ include "common.fullname" . }}
-spec:
- capacity:
- storage: {{ .Values.persistence.size}}
- accessModes:
- - {{ .Values.persistence.accessMode }}
- persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
- storageClassName: "{{ include "common.fullname" . }}-data"
- hostPath:
- path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
-{{- end -}}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/pvc.yaml b/kubernetes/log/components/log-elasticsearch/templates/pvc.yaml
deleted file mode 100644
index 6ae4eea0d3..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/pvc.yaml
+++ /dev/null
@@ -1,38 +0,0 @@
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
- release: "{{ include "common.release" . }}"
- heritage: "{{ .Release.Service }}"
-{{- if .Values.persistence.annotations }}
- annotations:
-{{ toYaml .Values.persistence.annotations | indent 4 }}
-{{- end }}
-spec:
- accessModes:
- - {{ .Values.persistence.accessMode }}
- storageClassName: {{ include "common.storageClass" . }}
- resources:
- requests:
- storage: {{ .Values.persistence.size }}
-{{- end -}}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/service.yaml b/kubernetes/log/components/log-elasticsearch/templates/service.yaml
deleted file mode 100644
index 7736f0c9d7..0000000000
--- a/kubernetes/log/components/log-elasticsearch/templates/service.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ .Values.service.name }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ .Values.service.name2 }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
-spec:
- type: {{ .Values.service.type2 }}
- ports:
- {{if eq .Values.service.type2 "NodePort" -}}
- - port: {{ .Values.service.internalPort2 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.name2 }}
- {{- else -}}
- - port: {{ .Values.service.externalPort2 }}
- targetPort: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name2 }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
diff --git a/kubernetes/log/components/log-elasticsearch/values.yaml b/kubernetes/log/components/log-elasticsearch/values.yaml
deleted file mode 100644
index 74cf4ed8c2..0000000000
--- a/kubernetes/log/components/log-elasticsearch/values.yaml
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- persistence: {}
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-
-# application image
-image: elasticsearch/elasticsearch:5.5.0
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-# Example:
-config: {}
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 120
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 120
- periodSeconds: 10
-
-## Persist data to a persitent volume
-persistence:
- enabled: true
-
- ## A manually managed Persistent Volume and Claim
- ## Requires persistence.enabled: true
- ## If defined, PVC must be created manually before volume will be bound
- # existingClaim:
- volumeReclaimPolicy: Retain
-
- ## database data Persistent Volume Storage Class
- ## If defined, storageClassName: <storageClass>
- ## If set to "-", storageClassName: "", which disables dynamic provisioning
- ## If undefined (the default) or set to null, no storageClassName spec is
- ## set, choosing the default provisioner. (gp2 on AWS, standard on
- ## GKE, AWS & OpenStack)
- accessMode: ReadWriteOnce
- size: 1Gi
- mountPath: /dockerdata-nfs
- mountSubPath: log/elasticsearch/data
- mountSubPathLogs: log
-
-service:
- type: NodePort
- name: log-es
- externalPort: 9200
- internalPort: 9200
- nodePort: 54
- type2: ClusterIP
- name2: log-es-tcp
- externalPort2: 9300
- internalPort2: 9300
-
-ingress:
- enabled: false
- service:
- - baseaddr: "log-es-api"
- name: "log-es"
- port: 9200
- config:
- ssl: "none"
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 1
- memory: 4Gi
- requests:
- cpu: 1
- memory: 2Gi
- large:
- limits:
- cpu: 2
- memory: 8Gi
- requests:
- cpu: 1
- memory: 4Gi
- unlimited: {}
diff --git a/kubernetes/log/components/log-kibana/Chart.yaml b/kubernetes/log/components/log-kibana/Chart.yaml
deleted file mode 100644
index fc557127ba..0000000000
--- a/kubernetes/log/components/log-kibana/Chart.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v2
-description: ONAP Logging Kibana
-name: log-kibana
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
diff --git a/kubernetes/log/components/log-kibana/resources/config/README.txt b/kubernetes/log/components/log-kibana/resources/config/README.txt
deleted file mode 100644
index 2863c1d5e5..0000000000
--- a/kubernetes/log/components/log-kibana/resources/config/README.txt
+++ /dev/null
@@ -1 +0,0 @@
-"kibana-onboarding.json" file contains initial setup of Kibana obtained using Elasticdump tool. \ No newline at end of file
diff --git a/kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json b/kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json
deleted file mode 100644
index e69de29bb2..0000000000
--- a/kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json
+++ /dev/null
diff --git a/kubernetes/log/components/log-kibana/resources/config/kibana.yml b/kubernetes/log/components/log-kibana/resources/config/kibana.yml
deleted file mode 100644
index 377f3c7b65..0000000000
--- a/kubernetes/log/components/log-kibana/resources/config/kibana.yml
+++ /dev/null
@@ -1,129 +0,0 @@
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-xpack.graph.enabled: false
-#Set to false to disable X-Pack graph features.
-xpack.ml.enabled: false
-#Set to false to disable X-Pack machine learning features.
-xpack.monitoring.enabled: false
-#Set to false to disable X-Pack monitoring features.
-xpack.reporting.enabled: false
-#Set to false to disable X-Pack reporting features.
-xpack.security.enabled: false
-#Set to false to disable X-Pack security features.
-xpack.watcher.enabled: false
-#Set to false to disable Watcher.
-# Kibana is served by a back end server. This setting specifies the port to use.
-server.port: {{.Values.service.externalPort}}
-
-# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
-# The default is 'localhost', which usually means remote machines will not be able to connect.
-# To allow connections from remote users, set this parameter to a non-loopback address.
-server.host: "0"
-
-# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
-# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
-# to Kibana. This setting cannot end in a slash.
-#server.basePath: ""
-
-# The maximum payload size in bytes for incoming server requests.
-#server.maxPayloadBytes: 1048576
-
-# The Kibana server's name. This is used for display purposes.
-server.name: "Kibana"
-
-# The URL of the Elasticsearch instance to use for all your queries.
-elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"
-# When this setting's value is true Kibana uses the hostname specified in the server.host
-# setting. When the value of this setting is false, Kibana uses the hostname of the host
-# that connects to this Kibana instance.
-#elasticsearch.preserveHost: true
-
-# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
-# dashboards. Kibana creates a new index if the index doesn't already exist.
-#kibana.index: ".kibana"
-
-# The default application to load.
-#kibana.defaultAppId: "discover"
-
-# If your Elasticsearch is protected with basic authentication, these settings provide
-# the username and password that the Kibana server uses to perform maintenance on the Kibana
-# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
-# is proxied through the Kibana server.
-elasticsearch.username: "elastic"
-elasticsearch.password: "changeme"
-# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
-# These settings enable SSL for outgoing requests from the Kibana server to the browser.
-#server.ssl.enabled: $server_ssl_enabled
-#server.ssl.certificate: $server_ssl_certificate
-#server.ssl.key: $server_ssl_key
-
-# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
-# These files validate that your Elasticsearch backend uses the same key files.
-#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
-#elasticsearch.ssl.key: $elasticsearch_ssl_key
-
-# Optional setting that enables you to specify a path to the PEM file for the certificate
-# authority for your Elasticsearch instance.
-#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities
-
-# To disregard the validity of SSL certificates, change this setting's value to 'none'.
-#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode
-
-# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
-# the elasticsearch.requestTimeout setting.
-#elasticsearch.pingTimeout: 1500
-
-# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
-# must be a positive integer.
-#elasticsearch.requestTimeout: 30000
-
-# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
-# headers, set this value to [] (an empty list).
-#elasticsearch.requestHeadersWhitelist: [ authorization ]
-
-# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
-# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
-#elasticsearch.customHeaders: {}
-
-# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
-#elasticsearch.shardTimeout: 0
-
-# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
-#elasticsearch.startupTimeout: 5000
-
-# Specifies the path where Kibana creates the process ID file.
-#pid.file: /var/run/kibana.pid
-
-# Enables you specify a file where Kibana stores log output.
-#logging.dest: stdout
-
-# Set the value of this setting to true to suppress all logging output.
-#logging.silent: false
-
-# Set the value of this setting to true to suppress all logging output other than error messages.
-#logging.quiet: false
-
-# Set the value of this setting to true to log all events, including system usage information
-# and all requests.
-#logging.verbose: false
-
-# Set the interval in milliseconds to sample system and process performance
-# metrics. Minimum is 100ms. Defaults to 5000.
-#ops.interval: 5000
-
-# The default locale. This locale can be used in certain circumstances to substitute any missing
-# translations.
-#i18n.defaultLocale: "en"
diff --git a/kubernetes/log/components/log-kibana/templates/NOTES.txt b/kubernetes/log/components/log-kibana/templates/NOTES.txt
deleted file mode 100644
index f115eb6f23..0000000000
--- a/kubernetes/log/components/log-kibana/templates/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/log/components/log-kibana/templates/configmap.yaml b/kubernetes/log/components/log-kibana/templates/configmap.yaml
deleted file mode 100644
index 3e98246df1..0000000000
--- a/kubernetes/log/components/log-kibana/templates/configmap.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/log/components/log-kibana/templates/deployment.yaml b/kubernetes/log/components/log-kibana/templates/deployment.yaml
deleted file mode 100644
index 604b0383a8..0000000000
--- a/kubernetes/log/components/log-kibana/templates/deployment.yaml
+++ /dev/null
@@ -1,116 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- initContainers:
- - command:
- - /app/ready.py
- args:
- - --container-name
- - log-elasticsearch
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ include "repositoryGenerator.image.readiness" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: {{ include "common.name" . }}-readiness
- - args:
- - --input=/config/kibana-onboarding.json
- - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/.kibana
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.elasticdumpImage }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: {{ include "common.name" . }}-elasticdump
- volumeMounts:
- - mountPath: /config/kibana-onboarding.json
- name: {{ include "common.fullname" . }}
- subPath: kibana-onboarding.json
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.elasticRepository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- resources: {{ include "common.resources" . | nindent 12 }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- readinessProbe:
- httpGet:
- path: "/"
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
- timeoutSeconds: {{ .Values.readiness.timeoutSeconds }}
-# disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- httpGet:
- path: "/"
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
- {{ end -}}
- env:
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /usr/share/kibana/config/
- name: {{ include "common.fullname" . }}
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: {{ include "common.fullname" . }}
- configMap:
- name: {{ include "common.fullname" . }}
- items:
- - key: kibana.yml
- path: kibana.yml
- - key: kibana-onboarding.json
- path: kibana-onboarding.json
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/log/components/log-kibana/templates/ingress.yaml b/kubernetes/log/components/log-kibana/templates/ingress.yaml
deleted file mode 100644
index 8f87c68f1e..0000000000
--- a/kubernetes/log/components/log-kibana/templates/ingress.yaml
+++ /dev/null
@@ -1 +0,0 @@
-{{ include "common.ingress" . }}
diff --git a/kubernetes/log/components/log-kibana/templates/service.yaml b/kubernetes/log/components/log-kibana/templates/service.yaml
deleted file mode 100644
index c53dc03368..0000000000
--- a/kubernetes/log/components/log-kibana/templates/service.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ .Values.service.name }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.externalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
diff --git a/kubernetes/log/components/log-kibana/values.yaml b/kubernetes/log/components/log-kibana/values.yaml
deleted file mode 100644
index 276bfea3b7..0000000000
--- a/kubernetes/log/components/log-kibana/values.yaml
+++ /dev/null
@@ -1,100 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- persistence: {}
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-
-# Elasticdump image
-elasticdumpImage: taskrabbit/elasticsearch-dump
-
-# application image
-image: kibana/kibana:5.5.0
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-config:
- elasticsearchServiceName: log-es
- elasticsearchPort: 9200
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 300
- periodSeconds: 10
- timeoutSeconds: 1
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 300
- periodSeconds: 10
- timeoutSeconds: 1
-
-service:
- #Example service definition with external, internal and node ports.
- #Services may use any combination of ports depending on the 'type' of
- #service being defined.
- type: NodePort
- name: log-kibana
- externalPort: 5601
- internalPort: 5601
- nodePort: 53
-
-ingress:
- enabled: false
- service:
- - baseaddr: "log-kibana-ui"
- name: "log-kibana"
- port: 5601
- config:
- ssl: "none"
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 2
- memory: 4Gi
- requests:
- cpu: 1
- memory: 2Gi
- large:
- limits:
- cpu: 4
- memory: 8Gi
- requests:
- cpu: 2
- memory: 4Gi
- unlimited: {}
diff --git a/kubernetes/log/components/log-logstash/Chart.yaml b/kubernetes/log/components/log-logstash/Chart.yaml
deleted file mode 100644
index 0c51886c82..0000000000
--- a/kubernetes/log/components/log-logstash/Chart.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-# Modifications Copyright © 2021 Orange
-# Modifications Copyright © 2021 Nordix Foundation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v2
-description: ONAP Logging Logstash
-name: log-logstash
-version: 12.0.0
-
-dependencies:
- - name: common
- version: ~12.x-0
- repository: '@local'
- - name: repositoryGenerator
- version: ~12.x-0
- repository: '@local'
diff --git a/kubernetes/log/components/log-logstash/resources/config/logstash.yml b/kubernetes/log/components/log-logstash/resources/config/logstash.yml
deleted file mode 100644
index 7c3bd8f851..0000000000
--- a/kubernetes/log/components/log-logstash/resources/config/logstash.yml
+++ /dev/null
@@ -1,32 +0,0 @@
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-http.host: "0.0.0.0"
-pipeline.workers: 3
-## Path where pipeline configurations reside
-path.config: /usr/share/logstash/pipeline
-
-## Type of queue : memeory based or file based
-#queue.type: persisted
-## Size of queue
-#queue.max_bytes: 1024mb
-## Setting true makes logstash check periodically for change in pipeline configurations
-config.reload.automatic: true
-
-## xpack configurations
-#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"]
-#xpack.monitoring.elasticsearch.username: elastic
-#xpack.monitoring.elasticsearch.password: changeme
-xpack.monitoring.enabled: false
diff --git a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf
deleted file mode 100644
index b224bf3173..0000000000
--- a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf
+++ /dev/null
@@ -1,276 +0,0 @@
-{{/*
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-input {
- beats {
-
- ## Add a id to plugin configuration. Can be anything unique.
- id => 'beats_plugin'
-
- ######## Connection configurations ########
-
- ## The port to listen on.
- port => {{.Values.service.externalPort}}
-
- ## Close Idle clients after the specified time in seconds. Default is 60 seconds
- #client_inactivity_timeout => 60
-
- ######## Security configurations ########
-
- ## Enable encryption. Default false.
- #ssl => $filebeat_ssl
-
- ## ssl certificate path.
- #ssl_certificate => $filebeat_ssl_certificate
-
- ## SSL key to use.
- #ssl_key => $filebeat_ssl_key
-
- ##SSL key passphrase to use.
- #ssl_key_passphrase => $filebeat_ssl_key_passphrase
-
- ## Value can be any of: none, peer, force_peer.
- #ssl_verify_mode => $filebeat_ssl_verify_mode
-
- ## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms.
- #ssl_handshake_timeout => 10000
- include_codec_tag => false
- }
-}
-
-
-filter {
- grok {
- break_on_match => false
- match => {
- "source" => ["/var/log/onap/(?<componentName>[^/]+)/",
- "/var/log/onap/%{GREEDYDATA:componentLogFile}"
- ]
- }
- }
-
- # Filter for log4j xml events
- if "</log4j:event>" in [message] {
-
- #mutate { add_field => { "orgmsg_log4j" => "%{message}" } } # Copy of orginal msg for debug
-
- #Filter to parse xml event and retrieve data
- xml {
- source => "message"
- store_xml => false
- remove_namespaces => true
- target => "xml_content"
- xpath => [ "/event/message/text()", "logmsg" ,
- "/event/@logger", "Logger",
- "/event/@timestamp", "Timestamp",
- "/event/@level", "loglevel",
- "/event/@thread", "Thread",
- "/event/throwable/text()", "Exceptionthrowable",
- "/event/NDC/text()", "NDCs",
- "/event/properties/data/@name","mdcname",
- "/event/properties/data/@value","mdcvalue"]
-
- }
-
- #Ruby filter to iterate and separate MDCs into documents
- ruby {
- code => '
- $i = 0
- $num = 0
- if event.get("[mdcname]")
- $num = event.get("[mdcname]").length
- end
- if $num != 0
- until $i > $num do
- if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i)
- event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i))
- end
- $i=$i+1
- end
- end
- '
- }
-
- #Validations
- if [Exceptionthrowable]
- {
- mutate {
- replace => {
- "exceptionmessage" => "%{[Exceptionthrowable]}"
- }
- }
- }
-
- if [NDCs]
- {
- mutate {
- replace => {
- "NDC" => "%{[NDCs]}"
- }
- }
- }
-
- mutate {
- replace => {
- "Logger" =>"%{[Logger]}"
- "logmsg" =>"%{[logmsg]}"
- "Timestamp" =>"%{[Timestamp]}"
- "loglevel" =>"%{[loglevel]}"
- "message" => "%{logmsg}"
- "Thread" => "%{[Thread]}"
- }
- remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"]
- }
-
- if [Timestamp]
- {
- date {
- match => ["Timestamp", "UNIX_MS"]
- target => "Timestamp"
- }
- }
- }
- # Filter for logback events
- else {
-
- #mutate { add_field => { "orgmsg" => "%{message}" } } # Copy of orginal msg for debug
-
- mutate {
- gsub => [
- 'message', ' = ', '=',
- 'message', '= ', '=null',
- 'message', '=\t', '=null\t', #This null is followed by a tab
- 'message', '\t$', '\t'
- ]
- }
- # The grok below parses the message field for all current logback patterns used by oom components.
- # Example logback pattern: %d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}|%X{RequestId}|%msg
- # Example grok pattern: %{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}
- # Use the following command to find all logback patterns in oom directory: find oom -name "logback*xml" -exec grep "property.*attern.*value" {} \;|sort|uniq
- grok {
- match => {
- "message" => [
- "%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}",
- "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:TargetVirtualEntity}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
- "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
- "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Timer}\|\[%{GREEDYDATA:caller}\]\|%{GREEDYDATA:message}",
- "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:ErrorCode}\|%{GREEDYDATA:ErrorDesc}\|%{GREEDYDATA:message}",
- "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ClassName}\|%{GREEDYDATA:message}",
- "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}",
- "\[%{TIMESTAMP_ISO8601:Timestamp}\|%{LOGLEVEL:loglevel}\|%{GREEDYDATA:Logger}\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}"
- ]
- }
- overwrite => ["message"]
- }
- # The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values.
- kv {
- source => "MDCs"
- field_split => ",\t"
- trim_key => "\s"
- trim_value => "\s"
- remove_field => [ "MDCs" ]
- }
-
- if (![Timestamp] and [EndTimestamp]) {
- mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } }
- }
- date {
- match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ]
- target => "Timestamp"
- }
-
- mutate {
- remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"]
- }
-
- if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") {
- #Parse kvps in message
- kv {
- field_split => "\s"
- trim_key => "\s"
- trim_value => "\s"
- }
-
- #If Request Id is missing and DID is present use as RequestId
- if (![RequestId] and [DID] =~ /.+/) {
- mutate { add_field => { "RequestId" => "%{DID}" } }
- }
- }
-
- } #Close else statement for logback events
-} #Close filter
-
-
-output {
- elasticsearch {
- id => 'onap_es'
-
- ######### Security configurations #########
-
- user => "elastic"
- password => "changeme"
-
- ## The .cer or .pem file to validate the server's certificate
- #cacert => $es_cacert
-
- ## The keystore used to present a certificate to the server. It can be either .jks or .p12
- #keystore => $es_keystore
- #keystore_password => $es_keystore_password
-
- ## Enable SSL/TLS secured communication to Elasticsearch cluster.
- ## Default is not set which in that case depends on the protocol specidfied in hosts list
- #ssl => $es_ssl
-
- ## Option to validate the server's certificate. Default is true
- #ssl_certificate_verification => $es_ssl_certificate_verification
-
- ## The JKS truststore to validate the server's certificate.
- #truststore => $es_truststore
- #truststore_password => $es_truststore_password
-
-
- ######### Elasticsearchcluster and host configurations #########
-
- ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
- hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"]
-
-
- ## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false.
- sniffing => true
-
- ## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds.
- #sniffing_delay => 5
-
- ## Set the address of a forward HTTP proxy.
- #proxy => $es_proxy
-
- ##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives
- #path => $es_path
-
- ######### Elasticsearch request configurations #########
-
- ## This setting defines the maximum sized bulk request Logstash will make.
- #flush_size => ?
-
- ######### Document configurations #########
-
- index => "logstash-%{+YYYY.MM.dd}"
- document_type => "logs"
-
- ## This can be used to associate child documents with a parent using the parent ID.
- #parent => "abcd'
- }
-}
-
diff --git a/kubernetes/log/components/log-logstash/templates/NOTES.txt b/kubernetes/log/components/log-logstash/templates/NOTES.txt
deleted file mode 100644
index f115eb6f23..0000000000
--- a/kubernetes/log/components/log-logstash/templates/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
- http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
- export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
- export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
- echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
- NOTE: It may take a few minutes for the LoadBalancer IP to be available.
- You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
- export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
- echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
- export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
- echo "Visit http://127.0.0.1:8080 to use your application"
- kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/log/components/log-logstash/templates/configmap.yaml b/kubernetes/log/components/log-logstash/templates/configmap.yaml
deleted file mode 100644
index 3e98246df1..0000000000
--- a/kubernetes/log/components/log-logstash/templates/configmap.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/log/components/log-logstash/templates/deployment.yaml b/kubernetes/log/components/log-logstash/templates/deployment.yaml
deleted file mode 100644
index 5d359dcd80..0000000000
--- a/kubernetes/log/components/log-logstash/templates/deployment.yaml
+++ /dev/null
@@ -1,104 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
- replicas: {{ .Values.replicaCount }}
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- initContainers:
- - command:
- - /app/ready.py
- args:
- - --container-name
- - log-elasticsearch
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ include "repositoryGenerator.image.readiness" . }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: {{ include "common.name" . }}-readiness
- containers:
- - name: {{ include "common.name" . }}
- image: {{ include "repositoryGenerator.elasticRepository" . }}/{{ .Values.image }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- resources: {{ include "common.resources" . | nindent 12 }}
- ports:
- - containerPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- - containerPort: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name2 }}
- readinessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
- periodSeconds: {{ .Values.readiness.periodSeconds }}
-# disable liveness probe when breakpoints set in debugger
- # so K8s doesn't restart unresponsive container
- {{- if eq .Values.liveness.enabled true }}
- livenessProbe:
- tcpSocket:
- port: {{ .Values.service.internalPort }}
- initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
- periodSeconds: {{ .Values.liveness.periodSeconds }}
- {{ end -}}
- env:
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /usr/share/logstash/config/
- name: {{ include "common.fullname" . }}-config
- - mountPath: /usr/share/logstash/pipeline/
- name: {{ include "common.fullname" . }}-pipeline
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: {{ include "common.fullname" . }}-config
- configMap:
- name: {{ include "common.fullname" . }}
- items:
- - key: logstash.yml
- path: logstash.yml
- - name: {{ include "common.fullname" . }}-pipeline
- configMap:
- name: {{ include "common.fullname" . }}
- items:
- - key: onap-pipeline.conf
- path: onap-pipeline.conf
- imagePullSecrets:
- - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/log/components/log-logstash/templates/ingress.yaml b/kubernetes/log/components/log-logstash/templates/ingress.yaml
deleted file mode 100644
index 8f87c68f1e..0000000000
--- a/kubernetes/log/components/log-logstash/templates/ingress.yaml
+++ /dev/null
@@ -1 +0,0 @@
-{{ include "common.ingress" . }}
diff --git a/kubernetes/log/components/log-logstash/templates/service.yaml b/kubernetes/log/components/log-logstash/templates/service.yaml
deleted file mode 100644
index 7736f0c9d7..0000000000
--- a/kubernetes/log/components/log-logstash/templates/service.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ .Values.service.name }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.internalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ .Values.service.name2 }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
-spec:
- type: {{ .Values.service.type2 }}
- ports:
- {{if eq .Values.service.type2 "NodePort" -}}
- - port: {{ .Values.service.internalPort2 }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.name2 }}
- {{- else -}}
- - port: {{ .Values.service.externalPort2 }}
- targetPort: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name2 }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
diff --git a/kubernetes/log/components/log-logstash/values.yaml b/kubernetes/log/components/log-logstash/values.yaml
deleted file mode 100644
index 0ffb32aa68..0000000000
--- a/kubernetes/log/components/log-logstash/values.yaml
+++ /dev/null
@@ -1,102 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- persistence: {}
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-
-# application image
-image: logstash/logstash:5.4.3
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-config:
- elasticsearchServiceName: log-es
- elasticsearchPort: 9200
-
-# default number of instances
-# 30+ logs/sec will saturate a single node to 6+ vCores
-replicaCount: 3
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 120
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- #Example service definition with external, internal and node ports.
- #Services may use any combination of ports depending on the 'type' of
- #service being defined.
- type: NodePort
- name: log-ls
- externalPort: 5044
- internalPort: 5044
- nodePort: 55
- type2: ClusterIP
- name2: log-ls-http
- externalPort2: 9600
- internalPort2: 9600
-ingress:
- enabled: false
- service:
- - baseaddr: "log-ls-api"
- name: "log-ls"
- port: 5044
- - baseaddr: "log-ls-http-api"
- name: "log-ls"
- port: 9600
- config:
- ssl: "none"
-
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
- small:
- limits:
- cpu: 1
- memory: 2Gi
- requests:
- cpu: 0.5
- memory: 1Gi
- large:
- limits:
- cpu: 2
- memory: 4Gi
- requests:
- cpu: 2
- memory: 4Gi
- unlimited: {}