diff options
Diffstat (limited to 'kubernetes/log/components/log-logstash/resources')
| -rw-r--r-- | kubernetes/log/components/log-logstash/resources/config/logstash.yml | 32 | ||||
| -rw-r--r-- | kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf | 276 |
2 files changed, 308 insertions, 0 deletions
diff --git a/kubernetes/log/components/log-logstash/resources/config/logstash.yml b/kubernetes/log/components/log-logstash/resources/config/logstash.yml new file mode 100644 index 0000000000..7c3bd8f851 --- /dev/null +++ b/kubernetes/log/components/log-logstash/resources/config/logstash.yml @@ -0,0 +1,32 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +http.host: "0.0.0.0" +pipeline.workers: 3 +## Path where pipeline configurations reside +path.config: /usr/share/logstash/pipeline + +## Type of queue : memeory based or file based +#queue.type: persisted +## Size of queue +#queue.max_bytes: 1024mb +## Setting true makes logstash check periodically for change in pipeline configurations +config.reload.automatic: true + +## xpack configurations +#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"] +#xpack.monitoring.elasticsearch.username: elastic +#xpack.monitoring.elasticsearch.password: changeme +xpack.monitoring.enabled: false diff --git a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf new file mode 100644 index 0000000000..d6b0696b81 --- /dev/null +++ b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf @@ -0,0 +1,276 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +input { + beats { + + ## Add a id to plugin configuration. Can be anything unique. + id => 'beats_plugin' + + ######## Connection configurations ######## + + ## The port to listen on. + port => {{.Values.service.externalPort}} + + ## Close Idle clients after the specified time in seconds. Default is 60 seconds + #client_inactivity_timeout => 60 + + ######## Security configurations ######## + + ## Enable encryption. Default false. + #ssl => $filebeat_ssl + + ## ssl certificate path. + #ssl_certificate => $filebeat_ssl_certificate + + ## SSL key to use. + #ssl_key => $filebeat_ssl_key + + ##SSL key passphrase to use. + #ssl_key_passphrase => $filebeat_ssl_key_passphrase + + ## Value can be any of: none, peer, force_peer. + #ssl_verify_mode => $filebeat_ssl_verify_mode + + ## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms. + #ssl_handshake_timeout => 10000 + include_codec_tag => false + } +} + + +filter { + grok { + break_on_match => false + match => { + "source" => ["/var/log/onap/(?<componentName>[^/]+)/", + "/var/log/onap/%{GREEDYDATA:componentLogFile}" + ] + } + } + + # Filter for log4j xml events + if "</log4j:event>" in [message] { + + #mutate { add_field => { "orgmsg_log4j" => "%{message}" } } # Copy of orginal msg for debug + + #Filter to parse xml event and retrieve data + xml { + source => "message" + store_xml => false + remove_namespaces => true + target => "xml_content" + xpath => [ "/event/message/text()", "logmsg" , + "/event/@logger", "Logger", + "/event/@timestamp", "Timestamp", + "/event/@level", "loglevel", + "/event/@thread", "Thread", + "/event/throwable/text()", "Exceptionthrowable", + "/event/NDC/text()", "NDCs", + "/event/properties/data/@name","mdcname", + "/event/properties/data/@value","mdcvalue"] + + } + + #Ruby filter to iterate and separate MDCs into documents + ruby { + code => ' + $i = 0 + $num = 0 + if event.get("[mdcname]") + $num = event.get("[mdcname]").length + end + if $num != 0 + until $i > $num do + if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i) + event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i)) + end + $i=$i+1 + end + end + ' + } + + #Validations + if [Exceptionthrowable] + { + mutate { + replace => { + "exceptionmessage" => "%{[Exceptionthrowable]}" + } + } + } + + if [NDCs] + { + mutate { + replace => { + "NDC" => "%{[NDCs]}" + } + } + } + + mutate { + replace => { + "Logger" =>"%{[Logger]}" + "logmsg" =>"%{[logmsg]}" + "Timestamp" =>"%{[Timestamp]}" + "loglevel" =>"%{[loglevel]}" + "message" => "%{logmsg}" + "Thread" => "%{[Thread]}" + } + remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"] + } + + if [Timestamp] + { + date { + match => ["Timestamp", "UNIX_MS"] + target => "Timestamp" + } + } + } + # Filter for logback events + else { + + #mutate { add_field => { "orgmsg" => "%{message}" } } # Copy of orginal msg for debug + + mutate { + gsub => [ + 'message', ' = ', '=', + 'message', '= ', '=null', + 'message', '=\t', '=null ', #This null is followed by a tab + 'message', '\t$', '\t' + ] + } + # The grok below parses the message field for all current logback patterns used by oom components. + # Example logback pattern: %d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%msg + # Example grok pattern: %{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message} + # Use the following command to find all logback patterns in oom directory: find oom -name "logback*xml" -exec grep "property.*attern.*value" {} \;|sort|uniq + grok { + match => { + "message" => [ + "%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}", + "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:TargetVirtualEntity}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}", + "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}", + "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Timer}\|\[%{GREEDYDATA:caller}\]\|%{GREEDYDATA:message}", + "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:ErrorCode}\|%{GREEDYDATA:ErrorDesc}\|%{GREEDYDATA:message}", + "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ClassName}\|%{GREEDYDATA:message}", + "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}", + "\[%{TIMESTAMP_ISO8601:Timestamp}\|%{LOGLEVEL:loglevel}\|%{GREEDYDATA:Logger}\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}" + ] + } + overwrite => ["message"] + } + # The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values. + kv { + source => "MDCs" + field_split => ",\t" + trim_key => "\s" + trim_value => "\s" + remove_field => [ "MDCs" ] + } + + if (![Timestamp] and [EndTimestamp]) { + mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } } + } + date { + match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ] + target => "Timestamp" + } + + mutate { + remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"] + } + + if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") { + #Parse kvps in message + kv { + field_split => "\s" + trim_key => "\s" + trim_value => "\s" + } + + #If Request Id is missing and DID is present use as RequestId + if (![RequestId] and [DID] =~ /.+/) { + mutate { add_field => { "RequestId" => "%{DID}" } } + } + } + + } #Close else statement for logback events +} #Close filter + + +output { + elasticsearch { + id => 'onap_es' + + ######### Security configurations ######### + + user => "elastic" + password => "changeme" + + ## The .cer or .pem file to validate the server's certificate + #cacert => $es_cacert + + ## The keystore used to present a certificate to the server. It can be either .jks or .p12 + #keystore => $es_keystore + #keystore_password => $es_keystore_password + + ## Enable SSL/TLS secured communication to Elasticsearch cluster. + ## Default is not set which in that case depends on the protocol specidfied in hosts list + #ssl => $es_ssl + + ## Option to validate the server's certificate. Default is true + #ssl_certificate_verification => $es_ssl_certificate_verification + + ## The JKS truststore to validate the server's certificate. + #truststore => $es_truststore + #truststore_password => $es_truststore_password + + + ######### Elasticsearchcluster and host configurations ######### + + ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered + hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"] + + + ## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false. + sniffing => true + + ## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds. + #sniffing_delay => 5 + + ## Set the address of a forward HTTP proxy. + #proxy => $es_proxy + + ##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives + #path => $es_path + + ######### Elasticsearch request configurations ######### + + ## This setting defines the maximum sized bulk request Logstash will make. + #flush_size => ? + + ######### Document configurations ######### + + index => "logstash-%{+YYYY.MM.dd}" + document_type => "logs" + + ## This can be used to associate child documents with a parent using the parent ID. + #parent => "abcd' + } +} + |