diff options
Diffstat (limited to 'kubernetes/log/components/log-logstash/resources')
| -rw-r--r-- | kubernetes/log/components/log-logstash/resources/config/logstash.yml | 32 | ||||
| -rw-r--r-- | kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf | 276 |
2 files changed, 0 insertions, 308 deletions
diff --git a/kubernetes/log/components/log-logstash/resources/config/logstash.yml b/kubernetes/log/components/log-logstash/resources/config/logstash.yml deleted file mode 100644 index 7c3bd8f851..0000000000 --- a/kubernetes/log/components/log-logstash/resources/config/logstash.yml +++ /dev/null @@ -1,32 +0,0 @@ -{{/* -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -*/}} -http.host: "0.0.0.0" -pipeline.workers: 3 -## Path where pipeline configurations reside -path.config: /usr/share/logstash/pipeline - -## Type of queue : memeory based or file based -#queue.type: persisted -## Size of queue -#queue.max_bytes: 1024mb -## Setting true makes logstash check periodically for change in pipeline configurations -config.reload.automatic: true - -## xpack configurations -#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"] -#xpack.monitoring.elasticsearch.username: elastic -#xpack.monitoring.elasticsearch.password: changeme -xpack.monitoring.enabled: false diff --git a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf deleted file mode 100644 index b224bf3173..0000000000 --- a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf +++ /dev/null @@ -1,276 +0,0 @@ -{{/* -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -*/}} -input { - beats { - - ## Add a id to plugin configuration. Can be anything unique. - id => 'beats_plugin' - - ######## Connection configurations ######## - - ## The port to listen on. - port => {{.Values.service.externalPort}} - - ## Close Idle clients after the specified time in seconds. Default is 60 seconds - #client_inactivity_timeout => 60 - - ######## Security configurations ######## - - ## Enable encryption. Default false. - #ssl => $filebeat_ssl - - ## ssl certificate path. - #ssl_certificate => $filebeat_ssl_certificate - - ## SSL key to use. - #ssl_key => $filebeat_ssl_key - - ##SSL key passphrase to use. - #ssl_key_passphrase => $filebeat_ssl_key_passphrase - - ## Value can be any of: none, peer, force_peer. - #ssl_verify_mode => $filebeat_ssl_verify_mode - - ## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms. - #ssl_handshake_timeout => 10000 - include_codec_tag => false - } -} - - -filter { - grok { - break_on_match => false - match => { - "source" => ["/var/log/onap/(?<componentName>[^/]+)/", - "/var/log/onap/%{GREEDYDATA:componentLogFile}" - ] - } - } - - # Filter for log4j xml events - if "</log4j:event>" in [message] { - - #mutate { add_field => { "orgmsg_log4j" => "%{message}" } } # Copy of orginal msg for debug - - #Filter to parse xml event and retrieve data - xml { - source => "message" - store_xml => false - remove_namespaces => true - target => "xml_content" - xpath => [ "/event/message/text()", "logmsg" , - "/event/@logger", "Logger", - "/event/@timestamp", "Timestamp", - "/event/@level", "loglevel", - "/event/@thread", "Thread", - "/event/throwable/text()", "Exceptionthrowable", - "/event/NDC/text()", "NDCs", - "/event/properties/data/@name","mdcname", - "/event/properties/data/@value","mdcvalue"] - - } - - #Ruby filter to iterate and separate MDCs into documents - ruby { - code => ' - $i = 0 - $num = 0 - if event.get("[mdcname]") - $num = event.get("[mdcname]").length - end - if $num != 0 - until $i > $num do - if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i) - event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i)) - end - $i=$i+1 - end - end - ' - } - - #Validations - if [Exceptionthrowable] - { - mutate { - replace => { - "exceptionmessage" => "%{[Exceptionthrowable]}" - } - } - } - - if [NDCs] - { - mutate { - replace => { - "NDC" => "%{[NDCs]}" - } - } - } - - mutate { - replace => { - "Logger" =>"%{[Logger]}" - "logmsg" =>"%{[logmsg]}" - "Timestamp" =>"%{[Timestamp]}" - "loglevel" =>"%{[loglevel]}" - "message" => "%{logmsg}" - "Thread" => "%{[Thread]}" - } - remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"] - } - - if [Timestamp] - { - date { - match => ["Timestamp", "UNIX_MS"] - target => "Timestamp" - } - } - } - # Filter for logback events - else { - - #mutate { add_field => { "orgmsg" => "%{message}" } } # Copy of orginal msg for debug - - mutate { - gsub => [ - 'message', ' = ', '=', - 'message', '= ', '=null', - 'message', '=\t', '=null\t', #This null is followed by a tab - 'message', '\t$', '\t' - ] - } - # The grok below parses the message field for all current logback patterns used by oom components. - # Example logback pattern: %d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%msg - # Example grok pattern: %{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message} - # Use the following command to find all logback patterns in oom directory: find oom -name "logback*xml" -exec grep "property.*attern.*value" {} \;|sort|uniq - grok { - match => { - "message" => [ - "%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}", - "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:TargetVirtualEntity}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}", - "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}", - "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Timer}\|\[%{GREEDYDATA:caller}\]\|%{GREEDYDATA:message}", - "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:ErrorCode}\|%{GREEDYDATA:ErrorDesc}\|%{GREEDYDATA:message}", - "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ClassName}\|%{GREEDYDATA:message}", - "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}", - "\[%{TIMESTAMP_ISO8601:Timestamp}\|%{LOGLEVEL:loglevel}\|%{GREEDYDATA:Logger}\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}" - ] - } - overwrite => ["message"] - } - # The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values. - kv { - source => "MDCs" - field_split => ",\t" - trim_key => "\s" - trim_value => "\s" - remove_field => [ "MDCs" ] - } - - if (![Timestamp] and [EndTimestamp]) { - mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } } - } - date { - match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ] - target => "Timestamp" - } - - mutate { - remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"] - } - - if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") { - #Parse kvps in message - kv { - field_split => "\s" - trim_key => "\s" - trim_value => "\s" - } - - #If Request Id is missing and DID is present use as RequestId - if (![RequestId] and [DID] =~ /.+/) { - mutate { add_field => { "RequestId" => "%{DID}" } } - } - } - - } #Close else statement for logback events -} #Close filter - - -output { - elasticsearch { - id => 'onap_es' - - ######### Security configurations ######### - - user => "elastic" - password => "changeme" - - ## The .cer or .pem file to validate the server's certificate - #cacert => $es_cacert - - ## The keystore used to present a certificate to the server. It can be either .jks or .p12 - #keystore => $es_keystore - #keystore_password => $es_keystore_password - - ## Enable SSL/TLS secured communication to Elasticsearch cluster. - ## Default is not set which in that case depends on the protocol specidfied in hosts list - #ssl => $es_ssl - - ## Option to validate the server's certificate. Default is true - #ssl_certificate_verification => $es_ssl_certificate_verification - - ## The JKS truststore to validate the server's certificate. - #truststore => $es_truststore - #truststore_password => $es_truststore_password - - - ######### Elasticsearchcluster and host configurations ######### - - ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered - hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"] - - - ## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false. - sniffing => true - - ## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds. - #sniffing_delay => 5 - - ## Set the address of a forward HTTP proxy. - #proxy => $es_proxy - - ##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives - #path => $es_path - - ######### Elasticsearch request configurations ######### - - ## This setting defines the maximum sized bulk request Logstash will make. - #flush_size => ? - - ######### Document configurations ######### - - index => "logstash-%{+YYYY.MM.dd}" - document_type => "logs" - - ## This can be used to associate child documents with a parent using the parent ID. - #parent => "abcd' - } -} - |