summaryrefslogtreecommitdiffstats
path: root/kubernetes/esr/components/esr-server/resources
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/esr/components/esr-server/resources')
-rw-r--r--kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml56
-rw-r--r--kubernetes/esr/components/esr-server/resources/config/logback.xml144
2 files changed, 200 insertions, 0 deletions
diff --git a/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml b/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..a60fb95795
--- /dev/null
+++ b/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,56 @@
+{{/*
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/esr/components/esr-server/resources/config/logback.xml b/kubernetes/esr/components/esr-server/resources/config/logback.xml
new file mode 100644
index 0000000000..fcc9f250d9
--- /dev/null
+++ b/kubernetes/esr/components/esr-server/resources/config/logback.xml
@@ -0,0 +1,144 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+
+<configuration scan="{{ .Values.log.scan.enabled }}" debug="{{ .Values.log.debug }}">
+
+ <property name="componentName" value='{{default "UNSET_COMPONENT" .Values.log.componentName}}'/>
+ <property name="subcomponentName" value='{{default "UNSET_SUBCOMPONENT" .Values.log.subcomponentName}}'/>
+
+ <property name="logDir" value="{{ .Values.log.logDir }}" />
+ <property name="queueSize" value="{{ .Values.log.queueSize }}"/>
+
+ <property name="p_tim" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorPattern" value="${p_tim}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property name="debugPattern" value="${p_tim}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
+ <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
+
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+
+ <!-- Console (human-readable) logging -->
+ <property name="consolePattern" value="%nopexception${p_log}\t${p_tim}\t${p_lvl}\t%message\t${p_mdc}\t%rootException\t${p_mak}\t${p_thr}%n"/>
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${metricPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFError"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>${errorPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFError"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${debugLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder>
+ <pattern>${consolePattern}</pattern>
+ </encoder>
+ </appender>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <logger name="com.att.eelf.error" level="debug" additivity="false">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+
+ <root level="{{ .Values.log.root.level }}">
+ <appender-ref ref="asyncEELFDebug" />
+ <appender-ref ref="STDOUT" />
+ </root>
+
+</configuration> \ No newline at end of file