diff options
Diffstat (limited to 'kubernetes/esr/components/esr-server/resources/config')
-rw-r--r-- | kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml | 56 | ||||
-rw-r--r-- | kubernetes/esr/components/esr-server/resources/config/logback.xml | 144 |
2 files changed, 200 insertions, 0 deletions
diff --git a/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml b/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml new file mode 100644 index 0000000000..a60fb95795 --- /dev/null +++ b/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml @@ -0,0 +1,56 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/esr/components/esr-server/resources/config/logback.xml b/kubernetes/esr/components/esr-server/resources/config/logback.xml new file mode 100644 index 0000000000..fcc9f250d9 --- /dev/null +++ b/kubernetes/esr/components/esr-server/resources/config/logback.xml @@ -0,0 +1,144 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- +# Copyright © 2018 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +--> + +<configuration scan="{{ .Values.log.scan.enabled }}" debug="{{ .Values.log.debug }}"> + + <property name="componentName" value='{{default "UNSET_COMPONENT" .Values.log.componentName}}'/> + <property name="subcomponentName" value='{{default "UNSET_SUBCOMPONENT" .Values.log.subcomponentName}}'/> + + <property name="logDir" value="{{ .Values.log.logDir }}" /> + <property name="queueSize" value="{{ .Values.log.queueSize }}"/> + + <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/> + <property name="p_lvl" value="%level"/> + <property name="p_log" value="%logger"/> + <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/> + <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/> + <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/> + <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/> + <property name="p_thr" value="%thread"/> + <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/> + + <property name="errorLogName" value="error" /> + <property name="metricsLogName" value="metrics" /> + <property name="auditLogName" value="audit" /> + <property name="debugLogName" value="debug" /> + + <property name="errorPattern" value="${p_tim}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" /> + <property name="debugPattern" value="${p_tim}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" /> + <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" /> + <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" /> + + <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" /> + + <!-- Console (human-readable) logging --> + <property name="consolePattern" value="%nopexception${p_log}\t${p_tim}\t${p_lvl}\t%message\t${p_mdc}\t%rootException\t${p_mak}\t${p_thr}%n"/> + + <appender name="EELFAudit" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${auditLogName}.log</file> + <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern> + </rollingPolicy> + <encoder> + <pattern>${auditPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>${queueSize}</queueSize> + <appender-ref ref="EELFAudit" /> + </appender> + + <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${metricsLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern> + </rollingPolicy> + <encoder> + <pattern>${metricPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>${queueSize}</queueSize> + <appender-ref ref="EELFMetrics"/> + </appender> + + <appender name="EELFError" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${errorLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern> + </rollingPolicy> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + <level>INFO</level> + </filter> + <encoder> + <pattern>${errorPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>${queueSize}</queueSize> + <appender-ref ref="EELFError"/> + </appender> + + <appender name="EELFDebug" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/${debugLogName}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> + <fileNamePattern>${logDirectory}/${debugLogName}.log.%d</fileNamePattern> + </rollingPolicy> + <encoder> + <pattern>${debugPattern}</pattern> + </encoder> + </appender> + + <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>${queueSize}</queueSize> + <appender-ref ref="EELFDebug" /> + <includeCallerData>true</includeCallerData> + </appender> + + <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender"> + <encoder> + <pattern>${consolePattern}</pattern> + </encoder> + </appender> + + <logger name="com.att.eelf.audit" level="info" additivity="false"> + <appender-ref ref="asyncEELFAudit" /> + </logger> + + <logger name="com.att.eelf.metrics" level="info" additivity="false"> + <appender-ref ref="asyncEELFMetrics" /> + </logger> + + <logger name="com.att.eelf.error" level="debug" additivity="false"> + <appender-ref ref="asyncEELFError" /> + </logger> + + <root level="{{ .Values.log.root.level }}"> + <appender-ref ref="asyncEELFDebug" /> + <appender-ref ref="STDOUT" /> + </root> + +</configuration>
\ No newline at end of file |