diff options
Diffstat (limited to 'kubernetes/dmaap')
36 files changed, 1768 insertions, 3 deletions
diff --git a/kubernetes/dmaap/Makefile b/kubernetes/dmaap/Makefile index 2cae72e16c..b39b91f804 100644 --- a/kubernetes/dmaap/Makefile +++ b/kubernetes/dmaap/Makefile @@ -13,7 +13,7 @@ # See the License for the specific language governing permissions and # limitations under the License. -make-dmaap: make-bus-controller make-message-router +make-dmaap: make-bus-controller make-message-router make-dmaap-data-router make-bus-controller: cd charts && helm dep up dmaap-bus-controller && helm lint dmaap-bus-controller @@ -21,5 +21,8 @@ make-bus-controller: make-message-router: cd charts && helm dep up message-router && helm lint message-router +make-dmaap-data-router: + cd charts && helm dep up dmaap-data-router && helm lint dmaap-data-router + clean: @find . -type f -name '*.tgz' -delete diff --git a/kubernetes/dmaap/README.md b/kubernetes/dmaap/README.md index d453d7555e..8c61b6a012 100644 --- a/kubernetes/dmaap/README.md +++ b/kubernetes/dmaap/README.md @@ -15,12 +15,14 @@ # Helm Chart for ONAP DMaaP Applications -ONAP includes the following Kubernetes services: +ONAP DMaaP includes the following Kubernetes services: 1) message-router - a message bus for applications 2) dbc-api - an API to provision DMaaP resources +3) dmaap-data-router - an API to provision data feeds for consumers # Service Dependencies message-router depends on AAF -dbc-api depends on AAF and Postgresql. +dmaap-data-router depends on AAF +dbc-api depends on AAF and Postgresql.
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/dmaap-data-router/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/Chart.yaml new file mode 100644 index 0000000000..07de3beccf --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP DMaaP Data Router +name: dmaap-data-router +version: 1.0 diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/Chart.yaml new file mode 100644 index 0000000000..9e4a05d3b8 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: DMaaP Data Router MariaDB Instance +name: dmaap-dr-db +version: 1.0 diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/conf.d/mariadb1.cnf b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/conf.d/mariadb1.cnf new file mode 100644 index 0000000000..ff2c63740b --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/conf.d/mariadb1.cnf @@ -0,0 +1,193 @@ +# Example MySQL config file for medium systems. +# +# This is for a system with memory 8G where MySQL plays +# an important part, or systems up to 128M where MySQL is used together with +# other programs (such as a web server) +# +# In this file, you can use all long options that a program supports. +# If you want to know which options a program supports, run the program +# with the "--help" option. + +# The following options will be passed to all MySQL clients +##[client] +##user = root +##port = 3306 +##socket = //opt/app/mysql/mysql.sock + +# Here follows entries for some specific programs + +# The MySQL server +[mysqld] +##performance_schema + +slow_query_log =ON +long_query_time =2 +slow_query_log_file =//var/lib/mysql/slow_query.log + +skip-external-locking +explicit_defaults_for_timestamp = true +skip-symbolic-links +local-infile = 0 +key_buffer_size = 16M +max_allowed_packet = 4M +table_open_cache = 100 +sort_buffer_size = 512K +net_buffer_length = 8K +read_buffer_size = 256K +read_rnd_buffer_size = 512K +myisam_sort_buffer_size = 8M +max_connections = 300 +lower_case_table_names = 1 +thread_stack = 256K +thread_cache_size = 25 +query_cache_size = 8M +query_cache_type = 0 +query_prealloc_size = 512K +query_cache_limit = 1M + +# Password validation +##plugin-load-add=simple_password_check.so +##simple_password_check_other_characters=0 + +# Audit Log settings +plugin-load-add=server_audit.so +server_audit=FORCE_PLUS_PERMANENT +server_audit_file_path=//var/lib/mysql/audit.log +server_audit_file_rotate_size=50M +server_audit_events=CONNECT,QUERY,TABLE +server_audit_logging=on + +# Don't listen on a TCP/IP port at all. This can be a security enhancement, +# if all processes that need to connect to mysqld run on the same host. +# All interaction with mysqld must be made via Unix sockets or named pipes. +# Note that using this option without enabling named pipes on Windows +# (via the "enable-named-pipe" option) will render mysqld useless! +# +#skip-networking + +# Replication Master Server (default) +# binary logging is required for replication +##log-bin=//var/lib/mysql/mysql-bin + +# binary logging format - mixed recommended +binlog_format=row + +# required unique id between 1 and 2^32 - 1 +# defaults to 1 if master-host is not set +# but will not function as a master if omitted + +# Replication Slave (comment out master section to use this) +# +# To configure this host as a replication slave, you can choose between +# two methods : +# +# 1) Use the CHANGE MASTER TO command (fully described in our manual) - +# the syntax is: +# +# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, +# MASTER_USER=<user>, MASTER_PASSWORD=<password> ; +# +# where you replace <host>, <user>, <password> by quoted strings and +# <port> by the master's port number (3306 by default). +# +# Example: +# +# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, +# MASTER_USER='joe', MASTER_PASSWORD='secret'; +# +# OR +# +# 2) Set the variables below. However, in case you choose this method, then +# start replication for the first time (even unsuccessfully, for example +# if you mistyped the password in master-password and the slave fails to +# connect), the slave will create a master.info file, and any later +# change in this file to the variables' values below will be ignored and +# overridden by the content of the master.info file, unless you shutdown +# the slave server, delete master.info and restart the slaver server. +# For that reason, you may want to leave the lines below untouched +# (commented) and instead use CHANGE MASTER TO (see above) +# +# required unique id between 2 and 2^32 - 1 +# (and different from the master) +# defaults to 2 if master-host is set +# but will not function as a slave if omitted +#server-id = 2 +# +# The replication master for this slave - required +#master-host = <hostname> +# +# The username the slave will use for authentication when connecting +# to the master - required +#master-user = <username> +# +# The password the slave will authenticate with when connecting to +# the master - required +#master-password = <password> +# +# The port the master is listening on. +# optional - defaults to 3306 +#master-port = <port> +# +# binary logging - not required for slaves, but recommended +#log-bin=mysql-bin + +# Uncomment the following if you are using InnoDB tables +##innodb_data_home_dir = //opt/app/mysql/data +##innodb_data_file_path = ibdata1:20M:autoextend:max:32G +##innodb_log_group_home_dir = //opt/app/mysql/iblogs +# You can set .._buffer_pool_size up to 50 - 80 % +# of RAM but beware of setting memory usage too high +#innodb_buffer_pool_size = 6380M +#innodb_additional_mem_pool_size = 2M +# Set .._log_file_size to 25 % of buffer pool size +innodb_log_file_size = 150M +innodb_log_files_in_group = 3 +innodb_log_buffer_size = 8M +#innodb_flush_log_at_trx_commit = 1 +innodb_lock_wait_timeout = 50 +innodb_autoextend_increment = 100 +expire_logs_days = 8 +open_files_limit = 2000 +transaction-isolation=READ-COMMITTED +####### Galera parameters ####### +## Galera Provider configuration +wsrep_provider=/usr/lib/galera/libgalera_smm.so +wsrep_provider_options="gcache.size=1G; gcache.page_size=1G" +## Galera Cluster configuration +wsrep_cluster_name="MSO-automated-tests-cluster" +wsrep_cluster_address="gcomm://" +#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3" +##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186" +## Galera Synchronization configuration +wsrep_sst_method=rsync +#wsrep_sst_method=xtrabackup-v2 +#wsrep_sst_auth="sstuser:Mon#2o!6" +## Galera Node configuration +wsrep_node_name="mariadb1" +##wsrep_node_address="192.169.3.184" +wsrep_on=ON +## Status notification +#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify +####### + + +[mysqldump] +quick +max_allowed_packet = 16M + +[mysql] +no-auto-rehash +# Remove the next comment character if you are not familiar with SQL +#safe-updates + +[myisamchk] +key_buffer_size = 20971520 + +##[mysqlhotcopy] +##interactive-timeout +##[mysqld_safe] +##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1 +##log-error=//opt/app/mysql/log/mysqld.log + +general_log_file = /var/log/mysql/mysql.log +general_log = 1 diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql new file mode 100644 index 0000000000..e7fade9eb8 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql @@ -0,0 +1,144 @@ +USE `datarouter`; + +CREATE TABLE FEEDS ( + FEEDID INT UNSIGNED NOT NULL PRIMARY KEY, + GROUPID INT(10) UNSIGNED NOT NULL DEFAULT 0, + NAME VARCHAR(255) NOT NULL, + VERSION VARCHAR(20) NOT NULL, + DESCRIPTION VARCHAR(1000), + BUSINESS_DESCRIPTION VARCHAR(1000) DEFAULT NULL, + AUTH_CLASS VARCHAR(32) NOT NULL, + PUBLISHER VARCHAR(8) NOT NULL, + SELF_LINK VARCHAR(256), + PUBLISH_LINK VARCHAR(256), + SUBSCRIBE_LINK VARCHAR(256), + LOG_LINK VARCHAR(256), + DELETED BOOLEAN DEFAULT FALSE, + LAST_MOD TIMESTAMP DEFAULT CURRENT_TIMESTAMP, + SUSPENDED BOOLEAN DEFAULT FALSE, + CREATED_DATE TIMESTAMP DEFAULT CURRENT_TIMESTAMP +); + +CREATE TABLE FEED_ENDPOINT_IDS ( + FEEDID INT UNSIGNED NOT NULL, + USERID VARCHAR(20) NOT NULL, + PASSWORD VARCHAR(32) NOT NULL +); + +CREATE TABLE FEED_ENDPOINT_ADDRS ( + FEEDID INT UNSIGNED NOT NULL, + ADDR VARCHAR(44) NOT NULL +); + +CREATE TABLE SUBSCRIPTIONS ( + SUBID INT UNSIGNED NOT NULL PRIMARY KEY, + FEEDID INT UNSIGNED NOT NULL, + GROUPID INT(10) UNSIGNED NOT NULL DEFAULT 0, + DELIVERY_URL VARCHAR(256), + DELIVERY_USER VARCHAR(20), + DELIVERY_PASSWORD VARCHAR(32), + DELIVERY_USE100 BOOLEAN DEFAULT FALSE, + METADATA_ONLY BOOLEAN DEFAULT FALSE, + SUBSCRIBER VARCHAR(8) NOT NULL, + SELF_LINK VARCHAR(256), + LOG_LINK VARCHAR(256), + LAST_MOD TIMESTAMP DEFAULT CURRENT_TIMESTAMP, + SUSPENDED BOOLEAN DEFAULT FALSE, + CREATED_DATE TIMESTAMP DEFAULT CURRENT_TIMESTAMP + +); + +CREATE TABLE PARAMETERS ( + KEYNAME VARCHAR(32) NOT NULL PRIMARY KEY, + VALUE VARCHAR(4096) NOT NULL +); + +CREATE TABLE LOG_RECORDS ( + TYPE ENUM('pub', 'del', 'exp', 'pbf', 'dlx') NOT NULL, + EVENT_TIME BIGINT NOT NULL, /* time of the publish request */ + PUBLISH_ID VARCHAR(64) NOT NULL, /* unique ID assigned to this publish attempt */ + FEEDID INT UNSIGNED NOT NULL, /* pointer to feed in FEEDS */ + REQURI VARCHAR(256) NOT NULL, /* request URI */ + METHOD ENUM('DELETE', 'GET', 'HEAD', 'OPTIONS', 'PUT', 'POST', 'TRACE') NOT NULL, /* HTTP method */ + CONTENT_TYPE VARCHAR(256) NOT NULL, /* content type of published file */ + CONTENT_LENGTH BIGINT NOT NULL, /* content length of published file */ + + FEED_FILEID VARCHAR(256), /* file ID of published file */ + REMOTE_ADDR VARCHAR(40), /* IP address of publishing endpoint */ + USER VARCHAR(50), /* user name of publishing endpoint */ + STATUS SMALLINT, /* status code returned to delivering agent */ + + DELIVERY_SUBID INT UNSIGNED, /* pointer to subscription in SUBSCRIPTIONS */ + DELIVERY_FILEID VARCHAR(256), /* file ID of file being delivered */ + RESULT SMALLINT, /* result received from subscribing agent */ + + ATTEMPTS INT, /* deliveries attempted */ + REASON ENUM('notRetryable', 'retriesExhausted', 'diskFull', 'other'), + + RECORD_ID BIGINT UNSIGNED NOT NULL PRIMARY KEY, /* unique ID for this record */ + CONTENT_LENGTH_2 BIGINT, + + INDEX (FEEDID) USING BTREE, + INDEX (DELIVERY_SUBID) USING BTREE, + INDEX (RECORD_ID) USING BTREE +) ENGINE = MyISAM; + +CREATE TABLE INGRESS_ROUTES ( + SEQUENCE INT UNSIGNED NOT NULL, + FEEDID INT UNSIGNED NOT NULL, + USERID VARCHAR(20), + SUBNET VARCHAR(44), + NODESET INT UNSIGNED NOT NULL +); + +CREATE TABLE EGRESS_ROUTES ( + SUBID INT UNSIGNED NOT NULL PRIMARY KEY, + NODEID INT UNSIGNED NOT NULL +); + +CREATE TABLE NETWORK_ROUTES ( + FROMNODE INT UNSIGNED NOT NULL, + TONODE INT UNSIGNED NOT NULL, + VIANODE INT UNSIGNED NOT NULL +); + +CREATE TABLE NODESETS ( + SETID INT UNSIGNED NOT NULL, + NODEID INT UNSIGNED NOT NULL +); + +CREATE TABLE NODES ( + NODEID INT UNSIGNED NOT NULL PRIMARY KEY, + NAME VARCHAR(255) NOT NULL, + ACTIVE BOOLEAN DEFAULT TRUE +); + +CREATE TABLE GROUPS ( + GROUPID INT UNSIGNED NOT NULL PRIMARY KEY, + AUTHID VARCHAR(100) NOT NULL, + NAME VARCHAR(50) NOT NULL, + DESCRIPTION VARCHAR(255), + CLASSIFICATION VARCHAR(20) NOT NULL, + MEMBERS TINYTEXT, + LAST_MOD TIMESTAMP DEFAULT CURRENT_TIMESTAMP +); + +INSERT INTO PARAMETERS VALUES + ('ACTIVE_POD', '{{.Values.global.config.dmaapDrProv.name}}'), + ('PROV_ACTIVE_NAME', '{{.Values.global.config.dmaapDrProv.name}}'), + ('STANDBY_POD', ''), + ('PROV_NAME', '{{.Values.global.config.dmaapDrProv.name}}'), + ('NODES', '{{.Values.global.config.dmaapDrNode.name}}'), + ('PROV_DOMAIN', '{{ include "common.namespace" . }}'), + ('DELIVERY_INIT_RETRY_INTERVAL', '10'), + ('DELIVERY_MAX_AGE', '86400'), + ('DELIVERY_MAX_RETRY_INTERVAL', '3600'), + ('DELIVERY_RETRY_RATIO', '2'), + ('LOGROLL_INTERVAL', '300'), + ('PROV_AUTH_ADDRESSES', '{{.Values.global.config.dmaapDrProv.name}}|{{.Values.global.config.dmaapDrNode.name}}'), + ('PROV_AUTH_SUBJECTS', ''), + ('PROV_MAXFEED_COUNT', '10000'), + ('PROV_MAXSUB_COUNT', '100000'), + ('PROV_REQUIRE_CERT', 'false'), + ('PROV_REQUIRE_SECURE', 'false'), + ('_INT_VALUES', 'LOGROLL_INTERVAL|PROV_MAXFEED_COUNT|PROV_MAXSUB_COUNT|DELIVERY_INIT_RETRY_INTERVAL|DELIVERY_MAX_RETRY_INTERVAL|DELIVERY_RETRY_RATIO|DELIVERY_MAX_AGE'); diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/NOTES.txt new file mode 100644 index 0000000000..71879412d0 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.global.config.mariadb.servicetype }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.global.config.mariadb.servicetype }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{.Values.global.config.mariadb.externalPort}} +{{- else if contains "ClusterIP" .Values.global.config.mariadb.servicetype }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{.Values.global.config.mariadb.internalPort}} +{{- end }} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/configmap.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/configmap.yaml new file mode 100644 index 0000000000..6cef5062a5 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/configmap.yaml @@ -0,0 +1,29 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-mdb-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-mdb-initd-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql").AsConfig . | indent 2 }}
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/deployment.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/deployment.yaml new file mode 100644 index 0000000000..6b19804ebb --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/deployment.yaml @@ -0,0 +1,107 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{.Values.global.config.mariadb.internalPort}} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + args: + - --lower-case-table-names=1 + - --wait_timeout=28800 + livenessProbe: + tcpSocket: + port: {{.Values.global.config.mariadb.internalPort}} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{.Values.global.config.mariadb.internalPort}} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: MYSQL_ROOT_PASSWORD + valueFrom: + secretKeyRef: + name: {{ template "common.fullname" . }}-secret + key: db-root-password + - name: MYSQL_USER + value: {{.Values.global.config.mariadb.userName}} + - name: MYSQL_DATABASE + value: {{.Values.global.config.mariadb.mysqlDatabase}} + - name: MYSQL_PASSWORD + valueFrom: + secretKeyRef: + name: {{ template "common.fullname" . }}-secret + key: db-user-password + volumeMounts: + - mountPath: /docker-entrypoint-initdb.d/sql_init_01.sql + name: docker-entrypoint-initdb + subPath: sql_init_01.sql + - mountPath: /etc/mysql/conf.d + name: mariadb-conf + - mountPath: /var/lib/mysql + name: mariadb-data + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: docker-entrypoint-initdb + configMap: + name: {{ include "common.fullname" . }}-mdb-initd-configmap + - name: mariadb-conf + configMap: + name: {{ include "common.fullname" . }}-mdb-configmap + - name: mariadb-data + {{- if .Values.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pv.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pv.yaml new file mode 100644 index 0000000000..da117f4919 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pv.yaml @@ -0,0 +1,37 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size }} + accessModes: + - {{ .Values.persistence.accessMode }} + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pvc.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pvc.yaml new file mode 100644 index 0000000000..e27c3311e9 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pvc.yaml @@ -0,0 +1,48 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + selector: + matchLabels: + name: {{ include "common.fullname" . }} + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- if .Values.persistence.storageClass }} +{{- if (eq "-" .Values.persistence.storageClass) }} + storageClassName: "" +{{- else }} + storageClassName: "{{ .Values.persistence.storageClass }}" +{{- end }} +{{- end }} +{{- end -}} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/secrets.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/secrets.yaml new file mode 100644 index 0000000000..bc93b9ecc9 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/secrets.yaml @@ -0,0 +1,28 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Secret +metadata: + name: {{ include "common.fullname" . }}-secret + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +type: Opaque +data: + db-root-password: {{ .Values.global.config.mariadb.mariadbRootPassword | b64enc | quote }} + db-user-password: {{ .Values.global.config.mariadb.userPassword | b64enc | quote }} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/service.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/service.yaml new file mode 100644 index 0000000000..53fed469f9 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/service.yaml @@ -0,0 +1,38 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{.Values.global.config.mariadb.name}} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + type: {{.Values.global.config.mariadb.servicetype}} + ports: + {{if eq .Values.global.config.mariadb.servicetype "NodePort" -}} + - port: {{.Values.global.config.mariadb.internalPort}} + nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.nodePort }} + {{- else -}} + - port: {{.Values.global.config.mariadb.externalPort}} + targetPort: {{.Values.global.config.mariadb.internalPort}} + {{- end}} + name: {{.Values.global.config.mariadb.name}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }}
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml new file mode 100644 index 0000000000..cf61c49c44 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml @@ -0,0 +1,79 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Default values for mariadb. +# This is a YAML-formatted file. +# Declare variables to be passed into your templates. +global: # global defaults + persistence: {} + +# application image +repository: nexus3.onap.org:10001 +image: mariadb:10.2.14 +pullPolicy: Always + +# application configuration - see parent values chart + +# flag to enable debugging - application support required +debugEnabled: false + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 30 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 30 + periodSeconds: 10 + +## Persist data to a persitent volume +persistence: + enabled: true + volumeReclaimPolicy: Retain + accessMode: ReadWriteMany + size: 1Gi + mountPath: /dockerdata-nfs + mountSubPath: dmaap/dr-db/data + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/Chart.yaml new file mode 100644 index 0000000000..084aa58dc6 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP DMaaP Data Router Node Server +name: dmaap-dr-node +version: 1.0 diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/createFeed.sh b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/createFeed.sh new file mode 100644 index 0000000000..a6a829a485 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/createFeed.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +dr_prov_url="{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.internalPort2}}" +ct_header="Content-Type:application/vnd.att-dr.feed" +obo_header="X-ATT-DR-ON-BEHALF-OF:dradmin" +feed_payload=/opt/app/datartr/etc/dedicatedFeed.json + +sleep 20 + +if curl -k https://${dr_prov_url}/internal/prov | awk 'BEGIN{ORS=""} {print}' | egrep "\"feeds\":\s+\[\]"; then + curl -X POST -H ${ct_header} -H ${obo_header} --data-ascii @${feed_payload} --post301 --location-trusted -k https://${dr_prov_url}; +else + echo "NO feed creation required"; +fi diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/dedicatedFeed.json b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/dedicatedFeed.json new file mode 100644 index 0000000000..a96f46d528 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/dedicatedFeed.json @@ -0,0 +1,18 @@ +{ + "name": "Default PM Feed", + "version": "m1.0", + "description": "Default feed provisioned for PM File collector", + "business_description": "Default Feed", + "suspend": false, + "deleted": false, + "changeowner": true, + "authorization": { + "classification": "unclassified", + "endpoint_addrs": [], + "endpoint_ids": [ + { + "password": "dradmin", + "id": "dradmin" + }] + } +}
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/node.properties b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/node.properties new file mode 100644 index 0000000000..41062c77c8 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/node.properties @@ -0,0 +1,111 @@ +#------------------------------------------------------------------------------- +# ============LICENSE_START================================================== +# * org.onap.dmaap +# * =========================================================================== +# * Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# * =========================================================================== +# * Licensed under the Apache License, Version 2.0 (the "License"); +# * you may not use this file except in compliance with the License. +# * You may obtain a copy of the License at +# * +# * http://www.apache.org/licenses/LICENSE-2.0 +# * +# * Unless required by applicable law or agreed to in writing, software +# * distributed under the License is distributed on an "AS IS" BASIS, +# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# * See the License for the specific language governing permissions and +# * limitations under the License. +# * ============LICENSE_END==================================================== +# * +# * ECOMP is a trademark and service mark of AT&T Intellectual Property. +# * +#------------------------------------------------------------------------------- +# +# Configuration parameters fixed at startup for the DataRouter node +# +# URL to retrieve dynamic configuration +# +#ProvisioningURL: ${DRTR_PROV_INTURL} +ProvisioningURL=https://{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.externalPort2}}/internal/prov + +# +# URL to upload PUB/DEL/EXP logs +# +#LogUploadURL: ${DRTR_LOG_URL} +LogUploadURL=https://{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.externalPort2}}/internal/logs + +# +# The port number for http as seen within the server +# +#IntHttpPort: ${DRTR_NODE_INTHTTPPORT:-8080} +IntHttpPort={{.Values.global.config.dmaapDrNode.internalPort}} +# +# The port number for https as seen within the server +# +IntHttpsPort={{.Values.global.config.dmaapDrNode.internalPort2}} +# +# The external port number for https taking port mapping into account +# +ExtHttpsPort=443 +# +# The minimum interval between fetches of the dynamic configuration +# from the provisioning server +# +MinProvFetchInterval=10000 +# +# The minimum interval between saves of the redirection data file +# +MinRedirSaveInterval=10000 +# +# The path to the directory where log files are stored +# +LogDir=/opt/app/datartr/logs +# +# The retention interval (in days) for log files +# +LogRetention=30 +# +# The path to the directories where data and meta data files are stored +# +SpoolDir=/opt/app/datartr/spool +# +# The path to the redirection data file +# +#RedirectionFile: etc/redirections.dat +# +# The type of keystore for https +# +KeyStoreType=jks +# +# The path to the keystore for https +# +KeyStoreFile=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks +# +# The password for the https keystore +# +KeyStorePassword=4*&GD+w58RUM]01No.CYY;z6 +# +# The password for the private key in the https keystore +# +KeyPassword=4*&GD+w58RUM]01No.CYY;z6 +# +# The type of truststore for https +# +TrustStoreType=jks +# +# The path to the truststore for https +# +TrustStoreFile=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks +# +# The password for the https truststore +# +TrustStorePassword=UDXlT6Iu[F)k,Htk92+B,0Xj +# +# The path to the file used to trigger an orderly shutdown +# +QuiesceFile=etc/SHUTDOWN +# +# The key used to generate passwords for node to node transfers +# +NodeAuthKey=Node123! + diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/NOTES.txt new file mode 100644 index 0000000000..42d7663182 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.global.config.dmaapDrNode.servicetype }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.global.config.dmaapDrNode.servicetype }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{.Values.global.config.dmaapDrNode.externalPort}} +{{- else if contains "ClusterIP" .Values.global.config.dmaapDrNode.servicetype }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{.Values.global.config.dmaapDrNode.internalPort}} +{{- end }}
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/configmap.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/configmap.yaml new file mode 100644 index 0000000000..0124f4d9b3 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/configmap.yaml @@ -0,0 +1,29 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-node-props-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/node.properties").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-create-feed-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/feeds/*").AsConfig . | indent 2 }} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/deployment.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/deployment.yaml new file mode 100644 index 0000000000..2aae2d0ba8 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + hostname: {{.Values.global.config.dmaapDrNode.name}} + initContainers: + - name: {{ include "common.name" . }}-readiness + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /root/ready.py + args: + - --container-name + - {{.Values.global.config.dmaapDrProv.name}} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{.Values.global.config.dmaapDrNode.externalPort}} + - containerPort: {{.Values.global.config.dmaapDrNode.externalPort2}} + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{.Values.global.config.dmaapDrNode.internalPort}} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{.Values.global.config.dmaapDrNode.internalPort}} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: false + - mountPath: /opt/app/datartr/etc/dedicatedFeed.json + subPath: dedicatedFeed.json + name: create-feed + - mountPath: /opt/app/datartr/etc/createFeed.sh + subPath: createFeed.sh + name: create-feed + - mountPath: /opt/app/datartr/etc/node.properties + subPath: node.properties + name: node-props + lifecycle: + postStart: + exec: + command: + - /opt/app/datartr/etc/createFeed.sh + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: create-feed + configMap: + name: {{ include "common.fullname" . }}-create-feed-configmap + defaultMode: 0755 + - name: node-props + configMap: + name: {{ include "common.fullname" . }}-node-props-configmap + - name: dr-node-data + {{- if .Values.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/service.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/service.yaml new file mode 100644 index 0000000000..e13e854d3b --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/service.yaml @@ -0,0 +1,49 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{.Values.global.config.dmaapDrNode.name}} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + service.alpha.kubernetes.io/tolerate-unready-endpoints: "true" +spec: + type: {{.Values.global.config.dmaapDrNode.servicetype}} + ports: + {{if eq .Values.global.config.dmaapDrNode.servicetype "NodePort" -}} + - port: {{.Values.global.config.dmaapDrNode.externalPort}} + targetPort: {{.Values.global.config.dmaapDrNode.internalPort}} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrNode.nodePort}} + name: {{.Values.global.config.dmaapDrNode.name}} + - port: {{.Values.global.config.dmaapDrNode.externalPort2}} + targetPort: {{.Values.global.config.dmaapDrNode.internalPort2}} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrNode.nodePort2}} + name: {{.Values.global.config.dmaapDrNode.name}}2 + {{- else -}} + - port: {{.Values.global.config.dmaapDrNode.externalPort}} + targetPort: {{.Values.global.config.dmaapDrNode.internalPort}} + name: {{.Values.global.config.dmaapDrNode.name}} + - port: {{.Values.global.config.dmaapDrNode.externalPort2}} + targetPort: {{.Values.global.config.dmaapDrNode.internalPort2}} + name: {{.Values.global.config.dmaapDrNode.name}}2 + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }}
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/values.yaml new file mode 100644 index 0000000000..272f6539e7 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/values.yaml @@ -0,0 +1,80 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/dmaap/datarouter-node +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration - see parent values chart + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 30 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 30 + periodSeconds: 10 + +## Persist data to a persitent volume +persistence: + enabled: false + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/Chart.yaml new file mode 100644 index 0000000000..591e9e011d --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP DMaaP Data Router Provisioning Server +name: dmaap-dr-prov +version: 1.0 diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/resources/config/provserver.properties b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/resources/config/provserver.properties new file mode 100644 index 0000000000..6bde746d66 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/resources/config/provserver.properties @@ -0,0 +1,49 @@ +#------------------------------------------------------------------------------- +# ============LICENSE_START================================================== +# * org.onap.dmaap +# * =========================================================================== +# * Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# * =========================================================================== +# * Licensed under the Apache License, Version 2.0 (the "License"); +# * you may not use this file except in compliance with the License. +# * You may obtain a copy of the License at +# * +# * http://www.apache.org/licenses/LICENSE-2.0 +# * +# * Unless required by applicable law or agreed to in writing, software +# * distributed under the License is distributed on an "AS IS" BASIS, +# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# * See the License for the specific language governing permissions and +# * limitations under the License. +# * ============LICENSE_END==================================================== +# * +# * ECOMP is a trademark and service mark of AT&T Intellectual Property. +# * +#------------------------------------------------------------------------------- + + +#Jetty Server properties +org.onap.dmaap.datarouter.provserver.http.port = {{.Values.global.config.dmaapDrProv.externalPort}} +org.onap.dmaap.datarouter.provserver.https.port = {{.Values.global.config.dmaapDrProv.externalPort2}} +org.onap.dmaap.datarouter.provserver.https.relaxation = true + +org.onap.dmaap.datarouter.provserver.keymanager.password = Qgw77oaQcdP*F8Pwa[&.,.Ab +org.onap.dmaap.datarouter.provserver.keystore.type = jks +org.onap.dmaap.datarouter.provserver.keystore.path = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks +org.onap.dmaap.datarouter.provserver.keystore.password = Qgw77oaQcdP*F8Pwa[&.,.Ab +org.onap.dmaap.datarouter.provserver.truststore.path = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks +org.onap.dmaap.datarouter.provserver.truststore.password = 9M?)?:KAj1z6gpLhNrVUG@0T +org.onap.dmaap.datarouter.provserver.accesslog.dir = /opt/app/datartr/logs +org.onap.dmaap.datarouter.provserver.spooldir = /opt/app/datartr/spool +org.onap.dmaap.datarouter.provserver.dbscripts = /opt/app/datartr/etc/misc +org.onap.dmaap.datarouter.provserver.logretention = 30 + +#DMAAP-597 (Tech Dept) REST request source IP auth +# relaxation to accommodate OOM kubernetes deploy +org.onap.dmaap.datarouter.provserver.isaddressauthenabled = false + +# Database access +org.onap.dmaap.datarouter.db.driver = org.mariadb.jdbc.Driver +org.onap.dmaap.datarouter.db.url = jdbc:mariadb://{{.Values.global.config.mariadb.name}}:{{.Values.global.config.mariadb.externalPort}}/datarouter +org.onap.dmaap.datarouter.db.login = datarouter +org.onap.dmaap.datarouter.db.password = datarouter diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/NOTES.txt new file mode 100644 index 0000000000..64e6abf1d5 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.global.config.dmaapDrProv.servicetype }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.global.config.dmaapDrProv.servicetype }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{.Values.global.config.dmaapDrProv.externalPort}} +{{- else if contains "ClusterIP" .Values.global.config.dmaapDrProv.servicetype }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{.Values.global.config.dmaapDrProv.internalPort}} +{{- end }} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/configmap.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/configmap.yaml new file mode 100644 index 0000000000..c8adab4ddf --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/configmap.yaml @@ -0,0 +1,21 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-prov-props-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/provserver.properties").AsConfig . | indent 2 }} diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/deployment.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/deployment.yaml new file mode 100644 index 0000000000..d956581a25 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/deployment.yaml @@ -0,0 +1,99 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + hostname: {{.Values.global.config.dmaapDrProv.name}} + initContainers: + - command: + - /root/ready.py + args: + - --container-name + - {{.Values.global.config.mariadb.name}} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{.Values.global.config.dmaapDrProv.externalPort}} + - containerPort: {{.Values.global.config.dmaapDrProv.externalPort2}} + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{.Values.global.config.dmaapDrProv.externalPort}} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{.Values.global.config.dmaapDrProv.externalPort}} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: false + - mountPath: /opt/app/datartr/etc/provserver.properties + subPath: provserver.properties + name: prov-props + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: prov-props + configMap: + name: {{ include "common.fullname" . }}-prov-props-configmap + - name: dr-prov-data + {{- if .Values.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/service.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/service.yaml new file mode 100644 index 0000000000..15059c6bcc --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/service.yaml @@ -0,0 +1,60 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{.Values.global.config.dmaapDrProv.name}} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + service.alpha.kubernetes.io/tolerate-unready-endpoints: "true" + msb.onap.org/service-info: '[ + { + "serviceName": "{{.Values.global.config.dmaapDrProv.name}}", + "version": "v1", + "url": "/", + "protocol": "REST", + "port": "{{.Values.global.config.dmaapDrProv.externalPort}}", + "visualRange":"1" + } + ]' + +spec: + type: {{.Values.global.config.dmaapDrProv.servicetype}} + ports: + {{if eq .Values.global.config.dmaapDrProv.servicetype "NodePort" -}} + - port: {{.Values.global.config.dmaapDrProv.externalPort}} + targetPort: {{.Values.global.config.dmaapDrProv.internalPort}} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrProv.nodePort}} + name: {{.Values.global.config.dmaapDrProv.name}} + - port: {{.Values.global.config.dmaapDrProv.externalPort2}} + targetPort: {{.Values.global.config.dmaapDrProv.internalPort2}} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrProv.nodePort2}} + name: {{.Values.global.config.dmaapDrProv.name}}2 + {{- else -}} + - port: {{.Values.global.config.dmaapDrProv.externalPort}} + targetPort: {{.Values.global.config.dmaapDrProv.internalPort}} + name: {{.Values.global.config.dmaapDrProv.name}} + - port: {{.Values.global.config.dmaapDrProv.externalPort2}} + targetPort: {{.Values.global.config.dmaapDrProv.internalPort2}} + name: {{.Values.global.config.dmaapDrProv.name}}2 + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }}
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/values.yaml new file mode 100644 index 0000000000..9b237b5c6a --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/values.yaml @@ -0,0 +1,81 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/dmaap/datarouter-prov +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration - see parent values chart + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 30 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 30 + periodSeconds: 10 + +## Persist data to a persitent volume +persistence: + enabled: false + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/dmaap-data-router/requirements.yaml b/kubernetes/dmaap/charts/dmaap-data-router/requirements.yaml new file mode 100644 index 0000000000..480e9e34f0 --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/requirements.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~2.0.0 + repository: '@local' + diff --git a/kubernetes/dmaap/charts/dmaap-data-router/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/values.yaml new file mode 100644 index 0000000000..7f29f931fb --- /dev/null +++ b/kubernetes/dmaap/charts/dmaap-data-router/values.yaml @@ -0,0 +1,58 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# DMaap Data Router Global config defaults. +################################################################# +global: + persistence: {} + env: + name: AUTO + ubuntuInitRepository: oomk8s + ubuntuInitImage: ubuntu-init:1.0.0 + + config: +# dr db configuration + mariadb: + servicetype: ClusterIP + name: dmaap-dr-db + portName: dr-db-port + internalPort: 3306 + externalPort: 3306 + mariadbRootPassword: datarouter + userName: datarouter + userPassword: datarouter + mysqlDatabase: datarouter +# dr provisioning server configuration + dmaapDrProv: + servicetype: NodePort + name: dmaap-dr-prov + externalPort: 8080 + externalPort2: 8443 + internalPort: 8080 + internalPort2: 8443 + portName: dr-prov-port + portName2: dr-prov-port2 + nodePort: 59 + nodePort2: 69 +# dr node server configuration + dmaapDrNode: + servicetype: ClusterIP + name: dmaap-dr-node + externalPort: 8080 + internalPort: 8080 + externalPort2: 8443 + internalPort2: 8443 + portName: dr-node-port + portName2: dr-node-port2 |