diff options
Diffstat (limited to 'kubernetes/dmaap/components/dmaap-dr-node/templates')
6 files changed, 451 insertions, 0 deletions
diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/NOTES.txt b/kubernetes/dmaap/components/dmaap-dr-node/templates/NOTES.txt new file mode 100644 index 0000000000..65597e062f --- /dev/null +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.config.dmaapDrNode.servicetype }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.config.dmaapDrNode.servicetype }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{.Values.config.dmaapDrNode.externalPort}} +{{- else if contains "ClusterIP" .Values.config.dmaapDrNode.servicetype }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{.Values.config.dmaapDrNode.internalPort}} +{{- end }}
\ No newline at end of file diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/configmap.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/configmap.yaml new file mode 100644 index 0000000000..a3882bcb38 --- /dev/null +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/configmap.yaml @@ -0,0 +1,68 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-create-feed-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/feeds/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-log + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-dbc-drnodes + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/dr_nodes/*.json").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-dmaap-filebeat-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }} diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml new file mode 100644 index 0000000000..096b51c094 --- /dev/null +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/post-install-job.yaml @@ -0,0 +1,67 @@ +apiVersion: batch/v1 +kind: Job +metadata: + name: {{ include "common.fullname" . }}-post-install + labels: + app.kubernetes.io/managed-by: {{.Release.Service | quote }} + app.kubernetes.io/instance: {{.Release.Name | quote }} + helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + annotations: + # This is what defines this resource as a hook. Without this line, the + # job is considered part of the release. + "helm.sh/hook": post-install + "helm.sh/hook-weight": "-2" + "helm.sh/hook-delete-policy": hook-succeeded +spec: + template: + metadata: + name: {{ include "common.fullname" . }} + labels: + app.kubernetes.io/managed-by: {{.Release.Service | quote }} + app.kubernetes.io/instance: {{.Release.Name | quote }} + helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}" + spec: + restartPolicy: Never + containers: + - name: post-install-job + image: "{{ include "common.repository" . }}/{{ .Values.global.clientImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + env: + - name: DELAY + value: "60" + - name: PROTO + value: "http" + - name: PORT + value: "8080" + - name: REQUESTID + value: "{{.Chart.Name}}-post-install" + + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + +# NOTE: on the following several configMaps, careful to include / at end +# since there may be more than one file in each mountPath +# NOTE: the basename of the subdirectory is important - it matches the DBCL API URI + - name: {{ include "common.fullname" . }}-dbc-drnodes + mountPath: /opt/app/config/dr_nodes/ + resources: +{{ include "common.resources" . | indent 10 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 8 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 8 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" . }}-dbc-drnodes + configMap: + name: {{ include "common.fullname" . }}-dbc-drnodes + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/pv.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/pv.yaml new file mode 100644 index 0000000000..016a6ea023 --- /dev/null +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/pv.yaml @@ -0,0 +1,61 @@ +{{/* + # ============LICENSE_START======================================================= + # Copyright (C) 2019 Nordix Foundation. + # ================================================================================ + # Licensed under the Apache License, Version 2.0 (the "License"); + # you may not use this file except in compliance with the License. + # You may obtain a copy of the License at + # + # http://www.apache.org/licenses/LICENSE-2.0 + # + # Unless required by applicable law or agreed to in writing, software + # distributed under the License is distributed on an "AS IS" BASIS, + # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + # See the License for the specific language governing permissions and + # limitations under the License. + # + # SPDX-License-Identifier: Apache-2.0 + # ============LICENSE_END========================================================= +*/}} + +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-spool-data-pv + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }}-spool-data-pv +spec: + capacity: + storage: {{ .Values.persistence.spoolSize }} + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: "{{ include "common.fullname" . }}-spool-data-stcl" + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.spoolMountSubPath }} +--- +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-event-logs-pv + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }}-event-logs-pv +spec: + capacity: + storage: {{ .Values.persistence.eventLogSize }} + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: "{{ include "common.fullname" . }}-event-logs-stcl" + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.eventLogsMountSubPath }}
\ No newline at end of file diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/service.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/service.yaml new file mode 100644 index 0000000000..b7207017da --- /dev/null +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/service.yaml @@ -0,0 +1,49 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{.Values.config.dmaapDrNode.name}} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + service.alpha.kubernetes.io/tolerate-unready-endpoints: "true" +spec: + type: {{.Values.config.dmaapDrNode.servicetype}} + ports: + {{if eq .Values.config.dmaapDrNode.servicetype "NodePort" -}} + - port: {{.Values.config.dmaapDrNode.externalPort}} + targetPort: {{.Values.config.dmaapDrNode.internalPort}} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrNode.nodePort}} + name: {{.Values.config.dmaapDrNode.name}} + - port: {{.Values.config.dmaapDrNode.externalPort2}} + targetPort: {{.Values.config.dmaapDrNode.internalPort2}} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrNode.nodePort2}} + name: {{.Values.config.dmaapDrNode.name}}2 + {{- else -}} + - port: {{.Values.config.dmaapDrNode.externalPort}} + targetPort: {{.Values.config.dmaapDrNode.internalPort}} + name: {{.Values.config.dmaapDrNode.name}} + - port: {{.Values.config.dmaapDrNode.externalPort2}} + targetPort: {{.Values.config.dmaapDrNode.internalPort2}} + name: {{.Values.config.dmaapDrNode.name}}2 + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }}
\ No newline at end of file diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/statefulset.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/statefulset.yaml new file mode 100644 index 0000000000..ec31f3f750 --- /dev/null +++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/statefulset.yaml @@ -0,0 +1,173 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +apiVersion: apps/v1beta1 +kind: StatefulSet +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + serviceName: {{ .Values.config.dmaapDrNode.name }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - name: {{ include "common.name" . }}-readiness + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /root/ready.py + args: + - --container-name + - dmaap-dr-prov + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{.Values.config.dmaapDrNode.externalPort}} + - containerPort: {{.Values.config.dmaapDrNode.externalPort2}} + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{.Values.config.dmaapDrNode.internalPort}} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{.Values.config.dmaapDrNode.internalPort}} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - mountPath: {{ .Values.persistence.spoolPath }} + name: {{ include "common.fullname" . }}-spool-data-pvc + - mountPath: {{ .Values.persistence.eventLogsPath }} + name: {{ include "common.fullname" . }}-event-logs-pvc + - mountPath: /etc/localtime + name: localtime + readOnly: false + - mountPath: /opt/app/datartr/etc/dedicatedFeed.json + name: {{ include "common.fullname" . }}-create-feed-config + subPath: dedicatedFeed.json + - mountPath: /opt/app/datartr/etc/createFeed.sh + name: {{ include "common.fullname" . }}-create-feed-config + subPath: createFeed.sh + - mountPath: /opt/app/datartr/etc/node.properties + name: {{ include "common.fullname" . }}-config + subPath: node.properties + - mountPath: /opt/app/datartr/etc/drNodeCadi.properties + name: {{ include "common.fullname" . }}-config + subPath: drNodeCadi.properties + lifecycle: + postStart: + exec: + command: + - /opt/app/datartr/etc/createFeed.sh + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + # Filebeat sidecar container + - name: {{ include "common.fullname" . }}-filebeat-onap + image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - name: {{ include "common.fullname" . }}-filebeat-conf + mountPath: /usr/share/filebeat/filebeat.yml + subPath: filebeat.yml + - name: {{ include "common.fullname" . }}-data-filebeat + mountPath: /usr/share/filebeat/data + - name: {{ include "common.fullname" . }}-event-logs-pvc + mountPath: /var/log/onap/datarouter-node + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" . }}-create-feed-config + configMap: + name: {{ include "common.fullname" . }}-create-feed-configmap + defaultMode: 0755 + items: + - key: createFeed.sh + path: createFeed.sh + - key: dedicatedFeed.json + path: dedicatedFeed.json + - name: {{ include "common.fullname" . }}-config + configMap: + name: {{ include "common.fullname" . }}-configmap + items: + - key: node.properties + path: node.properties + - key: drNodeCadi.properties + path: drNodeCadi.properties + - name: {{ include "common.fullname" . }}-log-conf + configMap: + name: {{ include "common.fullname" . }}-log + - name: {{ include "common.fullname" . }}-filebeat-conf + configMap: + name: {{ include "common.fullname" . }}-dmaap-filebeat-configmap + - name: {{ include "common.fullname" . }}-data-filebeat + emptyDir: {} + - name: {{ include "common.fullname" . }}-event-logs-pvc + emptyDir: {} + volumeClaimTemplates: + - metadata: + name: {{ include "common.fullname" . }}-spool-data-pvc + labels: + name: {{ include "common.fullname" . }} + spec: + accessModes: [ {{ .Values.persistence.accessMode }} ] + storageClassName: {{ include "common.fullname" . }}-spool-data-stcl + resources: + requests: + storage: {{ .Values.persistence.spoolSize }} + selector: + matchLabels: + name: {{ include "common.fullname" . }}-spool-data-pv + - metadata: + name: {{ include "common.fullname" . }}-event-logs-pvc + labels: + name: {{ include "common.fullname" . }} + spec: + accessModes: [ {{ .Values.persistence.accessMode }} ] + storageClassName: {{ include "common.fullname" . }}-event-logs-stcl + resources: + requests: + storage: {{ .Values.persistence.eventLogSize }} + selector: + matchLabels: + name: {{ include "common.fullname" . }}-event-logs-pv |