diff options
Diffstat (limited to 'kubernetes/dmaap/charts')
30 files changed, 1429 insertions, 10 deletions
diff --git a/kubernetes/dmaap/charts/dmaap-bus-controller/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-bus-controller/templates/NOTES.txt index fbab5a3758..254c6bf2a2 100644 --- a/kubernetes/dmaap/charts/dmaap-bus-controller/templates/NOTES.txt +++ b/kubernetes/dmaap/charts/dmaap-bus-controller/templates/NOTES.txt @@ -1,3 +1,17 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + 1. Get the application URL by running these commands: {{- if .Values.ingress.enabled }} {{- range .Values.ingress.hosts }} diff --git a/kubernetes/dmaap/charts/dmaap-bus-controller/values.yaml b/kubernetes/dmaap/charts/dmaap-bus-controller/values.yaml index 14b23e5084..2b4067d886 100644 --- a/kubernetes/dmaap/charts/dmaap-bus-controller/values.yaml +++ b/kubernetes/dmaap/charts/dmaap-bus-controller/values.yaml @@ -36,8 +36,8 @@ image: onap/dmaap/buscontroller:1.0.8 # application configuration -dmaapMessageRouterService: dmaap -aafURL: https://onap-aaf:8905/proxy/ +dmaapMessageRouterService: message-router +aafURL: https://aaf-authz/ topicMgrUser: m23456@dmaapbc.onap.org topicMgrPwd: onapdemo adminUser: m12345@dmaapbc.onap.org @@ -61,32 +61,38 @@ readiness: service: - type: ClusterIP + type: NodePort name: dmaap-bc + portName: dmaap-bc + portName2: dmaap-bc externalPort: 8080 internalPort: 8080 externalPort2: 8443 internalPort2: 8443 + nodePort: 41 + nodePort2: 42 # application configuration override for postgres postgres: - nameOverride: dbcl-db + nameOverride: dbc-pg service: - name: dbcl-postgres - name2: dbcl-pg-primary - name3: dbcl-pg-replica + name: dbc-postgres + name2: dbc-pg-primary + name3: dbc-pg-replica container: name: - primary: dbcl-pg-primary - replica: dbcl-pg-replica + primary: dbc-pg-primary + replica: dbc-pg-replica config: pgUserName: dmaap_admin pgDatabase: dmaap pgPrimaryPassword: onapdemodb pgUserPassword: onapdemodb pgRootPassword: onapdemodb - + persistence: + mountSubPath: dbc/data + mountInitPath: dbc ingress: enabled: false diff --git a/kubernetes/dmaap/charts/message-router/.helmignore b/kubernetes/dmaap/charts/message-router/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/message-router/Chart.yaml b/kubernetes/dmaap/charts/message-router/Chart.yaml new file mode 100644 index 0000000000..dd7371cde4 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Message Router +name: message-router +version: 2.0.0 diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/.helmignore b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/Chart.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/Chart.yaml new file mode 100644 index 0000000000..1457fa89b4 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Message Router Kafka Service +name: message-router-kafka +version: 2.0.0 + diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/NOTES.txt b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/NOTES.txt new file mode 100644 index 0000000000..f6e6e930b3 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/deployment.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/deployment.yaml new file mode 100644 index 0000000000..25ab2101cf --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/deployment.yaml @@ -0,0 +1,111 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - bash + args: + - -c + - "if [ -d /var/tmp/SDC-DISTR-NOTIF-TOPIC-SDC-OPENSOURCE-ENV1-0 ]; then echo nothing to do; else cp -a /opt/config/src/message-router/dcae-startup-vm-message-router/docker_files/data-kafka/* /var/tmp/; fi" + image: "{{ .Values.global.configRepository }}/{{ .Values.global.configImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - mountPath: /var/tmp + name: kafka-data + name: kafka-primer + - command: + - /root/ready.py + args: + - --container-name + - {{ .Values.zookeeper.name }} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: KAFKA_ZOOKEEPER_CONNECT + value: "{{.Values.zookeeper.name}}:{{.Values.zookeeper.port}}" + - name: KAFKA_ADVERTISED_HOST_NAME + value: "{{ include "common.servicename" . }}" + - name: KAFKA_BROKER_ID + value: "0" + - name: KAFKA_ADVERTISED_LISTENERS + value: PLAINTEXT://{{ include "common.name" . }}:{{.Values.service.internalPort}} + - name: KAFKA_ADVERTISED_PORT + value: "{{.Values.service.internalPort}}" + - name: KAFKA_PORT + value: "{{.Values.service.internalPort}}" + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /var/run/docker.sock + name: docker-socket + - mountPath: /kafka + name: kafka-data + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: docker-socket + hostPath: + path: /var/run/docker.sock + - name: kafka-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/pv.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/pv.yaml new file mode 100644 index 0000000000..da117f4919 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/pv.yaml @@ -0,0 +1,37 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size }} + accessModes: + - {{ .Values.persistence.accessMode }} + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/pvc.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/pvc.yaml new file mode 100644 index 0000000000..e27c3311e9 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/pvc.yaml @@ -0,0 +1,48 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + selector: + matchLabels: + name: {{ include "common.fullname" . }} + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- if .Values.persistence.storageClass }} +{{- if (eq "-" .Values.persistence.storageClass) }} + storageClassName: "" +{{- else }} + storageClassName: "{{ .Values.persistence.storageClass }}" +{{- end }} +{{- end }} +{{- end -}} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/service.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/service.yaml new file mode 100644 index 0000000000..117a8a9714 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/templates/service.yaml @@ -0,0 +1,32 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ .Values.service.name }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/values.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/values.yaml new file mode 100644 index 0000000000..0e7c2b72f7 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-kafka/values.yaml @@ -0,0 +1,116 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + configRepository: oomk8s + configImage: config-init:2.0.0-SNAPSHOT + persistence: {} + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: docker.io +image: wurstmeister/kafka:1.1.0 +pullPolicy: Always + +zookeeper: + name: message-router-zookeeper + port: 2181 + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +## Persist data to a persitent volume +persistence: + enabled: true + + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + ## + # storageClass: "-" + accessMode: ReadWriteMany + size: 2Gi + mountPath: /dockerdata-nfs + mountSubPath: message-router/data-kafka + +service: + type: NodePort + name: message-router-kafka + portName: message-router-kafka + internalPort: 9092 + externalPort: 9092 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/.helmignore b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/Chart.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/Chart.yaml new file mode 100644 index 0000000000..49ac35beff --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Dmaap Message Router Zookeeper Service +name: message-router-zookeeper +version: 2.0.0 + diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/NOTES.txt b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/NOTES.txt new file mode 100644 index 0000000000..f6e6e930b3 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/deployment.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/deployment.yaml new file mode 100644 index 0000000000..678b83e3bd --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/deployment.yaml @@ -0,0 +1,79 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - bash + args: + - -c + - "if [ -d /var/tmp/version-2 ]; then echo nothing to do; else cp -a /opt/config/src/message-router/dcae-startup-vm-message-router/docker_files/data-zookeeper/* /var/tmp/; fi" + image: "{{ .Values.global.configRepository }}/{{ .Values.global.configImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - mountPath: /var/tmp + name: zookeeper-data + name: zookeeper-primer + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /opt/zookeeper-3.4.9/data + name: zookeeper-data + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: zookeeper-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/pv.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/pv.yaml new file mode 100644 index 0000000000..da117f4919 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/pv.yaml @@ -0,0 +1,37 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size }} + accessModes: + - {{ .Values.persistence.accessMode }} + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/pvc.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/pvc.yaml new file mode 100644 index 0000000000..e27c3311e9 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/pvc.yaml @@ -0,0 +1,48 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + selector: + matchLabels: + name: {{ include "common.fullname" . }} + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- if .Values.persistence.storageClass }} +{{- if (eq "-" .Values.persistence.storageClass) }} + storageClassName: "" +{{- else }} + storageClassName: "{{ .Values.persistence.storageClass }}" +{{- end }} +{{- end }} +{{- end -}} diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/service.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/service.yaml new file mode 100644 index 0000000000..2386125587 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/templates/service.yaml @@ -0,0 +1,32 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ .Values.service.name }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + - port: {{ .Values.service.internalPort }} + name: {{ .Values.service.name }} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + clusterIP: None diff --git a/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/values.yaml b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/values.yaml new file mode 100644 index 0000000000..517a7c993d --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/charts/message-router-zookeeper/values.yaml @@ -0,0 +1,111 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + configRepository: oomk8s + configImage: config-init:2.0.0-SNAPSHOT + persistence: {} + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: docker.io +image: wurstmeister/zookeeper:latest +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +## Persist data to a persitent volume +persistence: + enabled: true + + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + ## + # storageClass: "-" + accessMode: ReadWriteMany + size: 2Gi + mountPath: /dockerdata-nfs + mountSubPath: message-router/data-zookeeper/ + +service: + type: NodePort + name: message-router-zookeeper + portName: message-router-zookeeper + internalPort: 2181 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/dmaap/charts/message-router/requirements.yaml b/kubernetes/dmaap/charts/message-router/requirements.yaml new file mode 100644 index 0000000000..7beecb385c --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/requirements.yaml @@ -0,0 +1,22 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~2.0.0 + # local reference to common chart, as it is + # a part of this chart's package and will not + # be published independently to a repo (at this point) + repository: '@local' + diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties new file mode 100755 index 0000000000..4015e941a6 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties @@ -0,0 +1,146 @@ +# Copyright © 2017 Amdocs, Bell Canada, AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +############################################################################### +## +## Cambria API Server config +## +## - Default values are shown as commented settings. +## + +############################################################################## +## +## HTTP service +## +## - 3904 is standard as of 7/29/14. +# +## Zookeeper Connection +## +## Both Cambria and Kafka make use of Zookeeper. +## +config.zk.servers={{.Values.zookeeper.name}}:{{.Values.zookeeper.port}} + + +############################################################################### +## +## Kafka Connection +## +## Items below are passed through to Kafka's producer and consumer +## configurations (after removing "kafka.") +## if you want to change request.required.acks it can take this one value +kafka.metadata.broker.list={{.Values.kafka.name}}:{{.Values.kafka.port}} +##kafka.request.required.acks=-1 +#kafka.client.zookeeper=${config.zk.servers} +consumer.timeout.ms=100 +zookeeper.connection.timeout.ms=6000 +zookeeper.session.timeout.ms=6000 +zookeeper.sync.time.ms=2000 +auto.commit.interval.ms=1000 +fetch.message.max.bytes =1000000 +auto.commit.enable=false + + +############################################################################### +## +## Secured Config +## +## Some data stored in the config system is sensitive -- API keys and secrets, +## for example. to protect it, we use an encryption layer for this section +## of the config. +## +## The key is a base64 encode AES key. This must be created/configured for +## each installation. +#cambria.secureConfig.key= +## +## The initialization vector is a 16 byte value specific to the secured store. +## This must be created/configured for each installation. +#cambria.secureConfig.iv= + +## Southfield Sandbox +cambria.secureConfig.key=b/7ouTn9FfEw2PQwL0ov/Q== +cambria.secureConfig.iv=wR9xP5k5vbz/xD0LmtqQLw== +authentication.adminSecret=fe3cCompound +#cambria.secureConfig.key[pc569h]=YT3XPyxEmKCTLI2NK+Sjbw== +#cambria.secureConfig.iv[pc569h]=rMm2jhR3yVnU+u2V9Ugu3Q== + + +############################################################################### +## +## Consumer Caching +## +## Kafka expects live connections from the consumer to the broker, which +## obviously doesn't work over connectionless HTTP requests. The Cambria +## server proxies HTTP requests into Kafka consumer sessions that are kept +## around for later re-use. Not doing so is costly for setup per request, +## which would substantially impact a high volume consumer's performance. +## +## This complicates Cambria server failover, because we often need server +## A to close its connection before server B brings up the replacement. +## + +## The consumer cache is normally enabled. +#cambria.consumer.cache.enabled=true + +## Cached consumers are cleaned up after a period of disuse. The server inspects +## consumers every sweepFreqSeconds and will clean up any connections that are +## dormant for touchFreqMs. +#cambria.consumer.cache.sweepFreqSeconds=15 +#cambria.consumer.cache.touchFreqMs=120000 + +## The cache is managed through ZK. The default value for the ZK connection +## string is the same as config.zk.servers. +#cambria.consumer.cache.zkConnect=${config.zk.servers} + +## +## Shared cache information is associated with this node's name. The default +## name is the hostname plus the HTTP service port this host runs on. (The +## hostname is determined via InetAddress.getLocalHost ().getCanonicalHostName(), +## which is not always adequate.) You can set this value explicitly here. +## +#cambria.api.node.identifier=<use-something-unique-to-this-instance> + +############################################################################### +## +## Metrics Reporting +## +## This server can report its metrics periodically on a topic. +## +#metrics.send.cambria.enabled=true +#metrics.send.cambria.topic=cambria.apinode.metrics #msgrtr.apinode.metrics.dmaap +#metrics.send.cambria.sendEverySeconds=60 + +cambria.consumer.cache.zkBasePath=/fe3c/cambria/consumerCache + +############################################################################## +#100mb +maxcontentlength=10000 + + +############################################################################## +#AAF Properties +msgRtr.namespace.aaf=org.openecomp.dcae.dmaap.mtnje2.mr.topic +msgRtr.topicfactory.aaf=org.openecomp.dcae.dmaap.topicFactory|:org.openecomp.dcae.dmaap.mtnje2.mr.topic: +enforced.topic.name.AAF=org.openecomp +forceAAF=false +transidUEBtopicreqd=false +defaultNSforUEB=org.openecomp.dmaap.mr.ueb +############################################################################## +#Mirror Maker Agent +msgRtr.mirrormakeradmin.aaf=org.openecomp.dmaap.mr.dev.mirrormaker|*|admin +msgRtr.mirrormakeruser.aaf=org.openecomp.dmaap.mr.dev.mirrormaker|*|user +msgRtr.mirrormakeruser.aaf.create=org.openecomp.dmaap.mr.dev.topicFactory|:org.openecomp.dmaap.mr.dev.topic: +msgRtr.mirrormaker.timeout=15000 +msgRtr.mirrormaker.topic=org.openecomp.dmaap.mr.prod.mm.agent +msgRtr.mirrormaker.consumergroup=mmagentserver +msgRtr.mirrormaker.consumerid=1 diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties new file mode 100755 index 0000000000..9079794517 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties @@ -0,0 +1,35 @@ +# Copyright © 2017 Amdocs, Bell Canada, AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +basic_realm=openecomp.org +basic_warn=TRUE + +cadi_loglevel=DEBUG +#cadi_keyfile=target/swm/package/nix/dist_files/appl/${artifactId}/etc/keyfile2 +cadi_keyfile=/appl/dmaapMR1/etc/keyfile +# Configure AAF +aaf_url=https://DME2RESOLVE/service=org.openecomp.authz.AuthorizationService/version=2.0/envContext=DEV/routeOffer=BAU_SE + +aaf_id=dgl@openecomp.org +aaf_password=enc:f2u5br1mh29M02- +aaf_timeout=5000 +aaf_clean_interval=1200000 +aaf_user_expires=60000 +aaf_high_count=1000000 + + +# The following properties are being set by the AJSC Container and should NOT need to be set here. +AFT_LATITUDE=33.823589 +AFT_LONGITUDE=-84.366982 +AFT_ENVIRONMENT=AFTUAT diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/mykey b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/mykey new file mode 100755 index 0000000000..c2b8b8779b --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/mykey @@ -0,0 +1,27 @@ +_sNOLphPzrU7L0L3oWv0pYwgV_ddGF1XoBsQEIAp34jfP-fGJFPfFYaMpDEZ3gwH59rNw6qyMZHk +k-4irklvVcWk36lC3twNvc0DueRCVrws1bkuhOLCXdxHJx-YG-1xM8EJfRmzh79WPlPkbAdyPmFF +Ah44V0GjAnInPOFZA6MHP9rNx9B9qECHRfmvzU13vJCcgTsrmOr-CEiWfRsnzPjsICxpq9OaVT_D +zn6rNaroGm1OiZNCrCgvRkCUHPOOCw3j9G1GeaImoZNYtozbz9u4sj13PU-MxIIAa64b1bMMMjpz +Upc8lVPI4FnJKg6axMmEGn5zJ6JUq9mtOVyPj__2GEuDgpx5H4AwodXXVjFsVgR8UJwI_BvS2JVp +JoQk0J1RqXmAXVamlsMAfzmmbARXgmrBfnuhveZnh9ymFVU-YZeujdANniXAwBGI7c6hG_BXkH7i +Eyf4Fn41_SV78PskP6qgqJahr9r3bqdjNbKBztIKCOEVrE_w3IM5r02l-iStk_NBRkj6cq_7VCpG +afxZ2CtZMwuZMiypO_wOgbdpCSKNzsL-NH2b4b08OlKiWb263gz634KJmV5WEfCl-6eH-JUFbWOS +JwQfActLNT2ZQPl2MyZQNBzJEWoJRgS6k7tPRO-zqeUtYYHGHVMCxMuMHGQcoilNNHEFeBCG_fBh +yAKb9g9F86Cbx9voMLiyTX2T3rwVHiSJFOzfNxGmfN5JWOthIun_c5hEY1tLQ15BomzkDwk7BAj7 +VbRCrVD45B6xrmSTMBSWYmLyr6mnQxQqeh9cMbD-0ZAncE3roxRnRvPKjFFa208ykYUp2V83r_PJ +fV5I9ZPKSjk9DwFyrjkcQQEYDhdK6IFqcd6nEthjYVkmunu2fsX0bIOm9GGdIbKGqBnpdgBO5hyT +rBr9HSlZrHcGdti1R823ckDF0Ekcl6kioDr5NLIpLtg9zUEDRm3QrbX2mv5Zs8W0pYnOqglxy3lz +bJZTN7oR7VasHUtjmp0RT9nLZkUs5TZ6MHhlIq3ZsQ6w_Q9Rv1-ofxfwfCC4EBrWKbWAGCf6By4K +Ew8321-2YnodhmsK5BrT4zQ1DZlmUvK8BmYjZe7wTljKjgYcsLTBfX4eMhJ7MIW1kpnl8AbiBfXh +QzN56Mki51Q8PSQWHm0W9tnQ0z6wKdck6zBJ8JyNzewZahFKueDTn-9DOqIDfr3YHvQLLzeXyJ8e +h4AgjW-hvlLzRGtkCknjLIgXVa3rMTycseAwbW-mgdCqqkw3SdEG8feAcyntmvE8j2jbtSDStQMB +9JdvyNLuQdNG4pxpusgvVso0-8NQF0YVa9VFwg9U6IPSx5p8FcW68OAHt_fEgT4ZtiH7o9aur4o9 +oYqUh2lALCY-__9QLq1KkNjMKs33Jz9E8LbRerG9PLclkTrxCjYAeUWBjCwSI7OB7xkuaYDSjkjj +a46NLpdBN1GNcsFFcZ79GFAK0_DsyxGLX8Tq6q0Bvhs8whD8wlSxpTGxYkyqNX-vcb7SDN_0WkCE +XSdZWkqTHXcYbOvoCOb_e6SFAztuMenuHWY0utX0gBfx_X5lPDFyoYXErxFQHiA7t27keshXNa6R +ukQRRS8kMjre1U74sc-fRNXkXpl57rG4rgxaEX0eBeowa53KAsVvUAoSac2aC_nfzXrDvoyf9Xi3 +JpEZNhUDLpFCEycV4I7jGQ9wo9qNaosvlsr6kbLDNdb_1xrGVgjT3xEvRNJNPqslSAu-yD-UFhC3 +AmCdYUnugw_eEFqXCHTARcRkdPPvl2XsmEKY2IqEeO5tz4DyXQFaL-5hEVh6lYEU1EOWHk3UGIXe +Vc5_Ttp82qNLmlJPbZvgmNTJzYTHDQ_27KBcp7IVVZgPDjVKdWqQvZ18KhxvfF3Idgy82LBZniFV +IbtxllXiPRxoPQriSXMnXjh3XkvSDI2pFxXfEvLRn1tvcFOwPNCz3QfPIzYg8uYXN5bRt3ZOrR_g +ZhIlrc7HO0VbNbeqEVPKMZ-cjkqGj4VAuDKoQc0eQ6X_wCoAGO78nPpLeIvZPx1X3z5YoqNA
\ No newline at end of file diff --git a/kubernetes/dmaap/charts/message-router/templates/NOTES.txt b/kubernetes/dmaap/charts/message-router/templates/NOTES.txt new file mode 100644 index 0000000000..f6e6e930b3 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/templates/NOTES.txt @@ -0,0 +1,33 @@ +# Copyright © 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/dmaap/charts/message-router/templates/configmap.yaml b/kubernetes/dmaap/charts/message-router/templates/configmap.yaml new file mode 100644 index 0000000000..9816bd9ca6 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/templates/configmap.yaml @@ -0,0 +1,29 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-msgrtrapi-prop-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/dmaap/MsgRtrApi.properties").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-cadi-prop-configmap + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/dmaap/cadi.properties").AsConfig . | indent 2 }} diff --git a/kubernetes/dmaap/charts/message-router/templates/deployment.yaml b/kubernetes/dmaap/charts/message-router/templates/deployment.yaml new file mode 100644 index 0000000000..379fc24594 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/templates/deployment.yaml @@ -0,0 +1,95 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/ready.py + args: + - --container-name + - {{ .Values.kafka.name }} + - --container-name + - {{ .Values.zookeeper.name }} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.externalPort }} + - containerPort: {{ .Values.service.externalPort2 }} + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.externalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.externalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /appl/dmaapMR1/bundleconfig/etc/appprops/MsgRtrApi.properties + subPath: MsgRtrApi.properties + name: appprops + - mountPath: /appl/dmaapMR1/etc/cadi.properties + subPath: cadi.properties + name: cadi + - mountPath: /appl/dmaapMR1/etc/keyfile + subPath: mykey + name: mykey + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: appprops + configMap: + name: {{ include "common.fullname" . }}-msgrtrapi-prop-configmap + - name: cadi + configMap: + name: {{ include "common.fullname" . }}-cadi-prop-configmap + - name: mykey + secret: + secretName: {{ include "common.fullname" . }}-secret + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dmaap/charts/message-router/templates/secrets.yaml b/kubernetes/dmaap/charts/message-router/templates/secrets.yaml new file mode 100644 index 0000000000..a7f6e18b39 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/templates/secrets.yaml @@ -0,0 +1,27 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Secret +metadata: + name: {{ include "common.fullname" . }}-secret + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ (.Files.Glob "resources/config/dmaap/mykey").AsSecrets | indent 2 }} +type: Opaque diff --git a/kubernetes/dmaap/charts/message-router/templates/service.yaml b/kubernetes/dmaap/charts/message-router/templates/service.yaml new file mode 100644 index 0000000000..45c2616ec9 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/templates/service.yaml @@ -0,0 +1,54 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + annotations: + msb.onap.org/service-info: '[ + { + "serviceName": "{{ include "common.servicename" . }}", + "version": "v1", + "url": "/", + "protocol": "REST", + "port": "{{.Values.service.internalPort}}", + "visualRange":"1" + } + ]' + +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }}-{{ .Values.service.externalPort }} + - port: {{ .Values.service.externalPort2 }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }} + name: {{ .Values.service.portName }}-{{ .Values.service.externalPort2 }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} diff --git a/kubernetes/dmaap/charts/message-router/values.yaml b/kubernetes/dmaap/charts/message-router/values.yaml new file mode 100644 index 0000000000..c69fe53cb2 --- /dev/null +++ b/kubernetes/dmaap/charts/message-router/values.yaml @@ -0,0 +1,95 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/dmaap/dmaap-mr:1.1.4 +pullPolicy: Always + +kafka: + name: message-router-kafka + port: 9092 +zookeeper: + name: message-router-zookeeper + port: 2181 + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + type: NodePort + name: message-router + portName: message-router + externalPort: 3904 + nodePort: 27 + externalPort2: 3905 + nodePort2: 26 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi |