diff options
Diffstat (limited to 'kubernetes/config/docker/init')
3 files changed, 0 insertions, 523 deletions
diff --git a/kubernetes/config/docker/init/src/config/log/vid/logback.xml b/kubernetes/config/docker/init/src/config/log/vid/logback.xml deleted file mode 100644 index 49db781b3e..0000000000 --- a/kubernetes/config/docker/init/src/config/log/vid/logback.xml +++ /dev/null @@ -1,299 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ================================================================================
- eCOMP Portal SDK
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ================================================================================
- -->
-<configuration scan="true" scanPeriod="3 seconds" debug="true">
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="vid" />
- <!-- The directory where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}" />
- <property name="pattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="generalLogName" value="application" />
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <!-- other constants -->
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
- <!-- The EELFAppender is used to record events to the general application
- log -->
- <appender name="EELF" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${generalLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="org.openecomp.portalapp.util.CustomLoggingFilter" />
- </appender>
- <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <includeCallerData>true</includeCallerData>
- <appender-ref ref="EELF" />
- </appender>
- <!-- EELF Security Appender. This appender is used to record security events
- to the security log file. Security events are separate from other loggers
- in EELF so that security log records can be captured and managed in a secure
- way separate from the other logs. This appender is set to never discard any
- events. -->
- <!--
- <appender name="EELFSecurity"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${securityLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <discardingThreshold>0</discardingThreshold>
- <appender-ref ref="EELFSecurity" />
- </appender>
- -->
- <!-- EELF Performance Appender. This appender is used to record performance
- records. -->
- <!--
- <appender name="EELFPerformance"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${performanceLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <outputPatternAsHeader>true</outputPatternAsHeader>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFPerformance" />
- </appender>
- -->
- <!-- EELF Server Appender. This appender is used to record Server related
- logging events. The Server logger and appender are specializations of the
- EELF application root logger and appender. This can be used to segregate Server
- events from other components, or it can be eliminated to record these events
- as part of the application root log. -->
- <!--
- <appender name="EELFServer"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${serverLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFServer" />
- </appender>
- -->
- <!-- EELF Policy Appender. This appender is used to record Policy engine
- related logging events. The Policy logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <!--
- <appender name="EELFPolicy"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${policyLogName}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="EELFPolicy" />
- </appender>
- -->
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
- <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- </appender>
- <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- </appender>
- <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger name="com.att.eelf" level="debug" additivity="false">
- <appender-ref ref="asyncEELF" />
- </logger>
- <!--
- <logger name="com.att.eelf.security" level="info" additivity="false">
- <appender-ref ref="asyncEELFSecurity" />
- </logger>
- <logger name="com.att.eelf.perf" level="info" additivity="false">
- <appender-ref ref="asyncEELFPerformance" />
- </logger>
- <logger name="com.att.eelf.server" level="info" additivity="false">
- <appender-ref ref="asyncEELFServer" />
- </logger>
- <logger name="com.att.eelf.policy" level="info" additivity="false">
- <appender-ref ref="asyncEELFPolicy" />
- </logger>
- -->
- <logger name="com.att.eelf.audit" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger name="com.att.eelf.metrics" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger name="com.att.eelf.error" level="info" additivity="false">
- <appender-ref ref="asyncEELFError" />
- </logger>
- <logger name="com.att.eelf.debug" level="debug" additivity="false">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
- <root level="INFO">
- <appender-ref ref="asyncEELF" />
- </root>
-</configuration>
diff --git a/kubernetes/config/docker/init/src/config/vid/vid/lf_config/vid-my.cnf b/kubernetes/config/docker/init/src/config/vid/vid/lf_config/vid-my.cnf deleted file mode 100755 index 472bf4698e..0000000000 --- a/kubernetes/config/docker/init/src/config/vid/vid/lf_config/vid-my.cnf +++ /dev/null @@ -1,192 +0,0 @@ -# MariaDB database server configuration file. -# -# You can copy this file to one of: -# - "/etc/mysql/my.cnf" to set global options, -# - "~/.my.cnf" to set user-specific options. -# -# One can use all long options that the program supports. -# Run program with --help to get a list of available options and with -# --print-defaults to see which it would actually understand and use. -# -# For explanations see -# http://dev.mysql.com/doc/mysql/en/server-system-variables.html - -# This will be passed to all mysql clients -# It has been reported that passwords should be enclosed with ticks/quotes -# escpecially if they contain "#" chars... -# Remember to edit /etc/mysql/debian.cnf when changing the socket location. -[client] -port = 3306 -socket = /var/run/mysqld/mysqld.sock - -# Here is entries for some specific programs -# The following values assume you have at least 32M ram - -# This was formally known as [safe_mysqld]. Both versions are currently parsed. -[mysqld_safe] -socket = /var/run/mysqld/mysqld.sock -nice = 0 - -[mysqld] -lower_case_table_names = 1 -skip-host-cache -skip-name-resolve -# -# * Basic Settings -# -#user = mysql -pid-file = /var/run/mysqld/mysqld.pid -socket = /var/run/mysqld/mysqld.sock -port = 3306 -basedir = /usr -datadir = /var/lib/mysql -tmpdir = /tmp -lc_messages_dir = /usr/share/mysql -lc_messages = en_US -skip-external-locking -# -# Instead of skip-networking the default is now to listen only on -# localhost which is more compatible and is not less secure. -#bind-address = 127.0.0.1 -# -# * Fine Tuning -# -max_connections = 100 -connect_timeout = 5 -wait_timeout = 600 -max_allowed_packet = 16M -thread_cache_size = 128 -sort_buffer_size = 4M -bulk_insert_buffer_size = 16M -tmp_table_size = 32M -max_heap_table_size = 32M -# -# * MyISAM -# -# This replaces the startup script and checks MyISAM tables if needed -# the first time they are touched. On error, make copy and try a repair. -myisam_recover_options = BACKUP -key_buffer_size = 128M -#open-files-limit = 2000 -table_open_cache = 400 -myisam_sort_buffer_size = 512M -concurrent_insert = 2 -read_buffer_size = 2M -read_rnd_buffer_size = 1M -# -# * Query Cache Configuration -# -# Cache only tiny result sets, so we can fit more in the query cache. -query_cache_limit = 128K -query_cache_size = 64M -# for more write intensive setups, set to DEMAND or OFF -#query_cache_type = DEMAND -# -# * Logging and Replication -# -# Both location gets rotated by the cronjob. -# Be aware that this log type is a performance killer. -# As of 5.1 you can enable the log at runtime! -#general_log_file = /var/log/mysql/mysql.log -#general_log = 1 -# -# Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. -# -# we do want to know about network errors and such -#log_warnings = 2 -# -# Enable the slow query log to see queries with especially long duration -#slow_query_log[={0|1}] -slow_query_log_file = /var/log/mysql/mariadb-slow.log -long_query_time = 10 -#log_slow_rate_limit = 1000 -#log_slow_verbosity = query_plan - -#log-queries-not-using-indexes -#log_slow_admin_statements -# -# The following can be used as easy to replay backup logs or for replication. -# note: if you are setting up a replication slave, see README.Debian about -# other settings you may need to change. -#server-id = 1 -#report_host = master1 -#auto_increment_increment = 2 -#auto_increment_offset = 1 -#log_bin = /var/log/mysql/mariadb-bin -#log_bin_index = /var/log/mysql/mariadb-bin.index -# not fab for performance, but safer -#sync_binlog = 1 -expire_logs_days = 10 -max_binlog_size = 100M -# slaves -#relay_log = /var/log/mysql/relay-bin -#relay_log_index = /var/log/mysql/relay-bin.index -#relay_log_info_file = /var/log/mysql/relay-bin.info -#log_slave_updates -#read_only -# -# If applications support it, this stricter sql_mode prevents some -# mistakes like inserting invalid dates etc. -#sql_mode = NO_ENGINE_SUBSTITUTION,TRADITIONAL -# -# * InnoDB -# -# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. -# Read the manual for more InnoDB related options. There are many! -default_storage_engine = InnoDB -# you can't just change log file size, requires special procedure -#innodb_log_file_size = 50M -innodb_buffer_pool_size = 256M -innodb_log_buffer_size = 8M -innodb_file_per_table = 1 -innodb_open_files = 400 -innodb_io_capacity = 400 -innodb_flush_method = O_DIRECT -# -# * Security Features -# -# Read the manual, too, if you want chroot! -# chroot = /var/lib/mysql/ -# -# For generating SSL certificates I recommend the OpenSSL GUI "tinyca". -# -# ssl-ca=/etc/mysql/cacert.pem -# ssl-cert=/etc/mysql/server-cert.pem -# ssl-key=/etc/mysql/server-key.pem - -# -# * Galera-related settings -# -[galera] -# Mandatory settings -#wsrep_on=ON -#wsrep_provider= -#wsrep_cluster_address= -#binlog_format=row -#default_storage_engine=InnoDB -#innodb_autoinc_lock_mode=2 -# -# Allow server to accept connections on all interfaces. -# -#bind-address=0.0.0.0 -# -# Optional setting -#wsrep_slave_threads=1 -#innodb_flush_log_at_trx_commit=0 - -[mysqldump] -quick -quote-names -max_allowed_packet = 16M - -[mysql] -#no-auto-rehash # faster start of mysql but no tab completion - -[isamchk] -key_buffer = 16M - -# -# * IMPORTANT: Additional settings that can override those from this file! -# The files must end with '.cnf', otherwise they'll be ignored. -# -!includedir /etc/mysql/conf.d/ diff --git a/kubernetes/config/docker/init/src/config/vid/vid/lf_config/vid-pre-init.sql b/kubernetes/config/docker/init/src/config/vid/vid/lf_config/vid-pre-init.sql deleted file mode 100755 index 57b797d03c..0000000000 --- a/kubernetes/config/docker/init/src/config/vid/vid/lf_config/vid-pre-init.sql +++ /dev/null @@ -1,32 +0,0 @@ -/*- - * ============LICENSE_START======================================================= - * VID - * ================================================================================ - * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. - * ================================================================================ - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * ============LICENSE_END========================================================= - */ -CREATE TABLE IF NOT EXISTS `vid_openecomp_epsdk`.`schema_info` ( - `SCHEMA_ID` VARCHAR(25) NOT NULL, - `SCHEMA_DESC` VARCHAR(75) NOT NULL, - `DATASOURCE_TYPE` VARCHAR(100) NULL DEFAULT NULL, - `CONNECTION_URL` VARCHAR(200) NOT NULL, - `USER_NAME` VARCHAR(45) NOT NULL, - `PASSWORD` VARCHAR(45) NULL DEFAULT NULL, - `DRIVER_CLASS` VARCHAR(100) NOT NULL, - `MIN_POOL_SIZE` INT(11) NOT NULL, - `MAX_POOL_SIZE` INT(11) NOT NULL, - `IDLE_CONNECTION_TEST_PERIOD` INT(11) NOT NULL) - ENGINE = InnoDB - DEFAULT CHARACTER SET = utf8; |