diff options
Diffstat (limited to 'kubernetes/common')
30 files changed, 165 insertions, 1678 deletions
diff --git a/kubernetes/common/cassandra/values.yaml b/kubernetes/common/cassandra/values.yaml index dfa0a3e250..090dbcc2a2 100644 --- a/kubernetes/common/cassandra/values.yaml +++ b/kubernetes/common/cassandra/values.yaml @@ -27,7 +27,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: library/cassandra:2.2.14 +image: library/cassandra:3.11.4 pullPolicy: Always # flag to enable debugging - application support required @@ -90,6 +90,7 @@ service: port: 7199 - name: tcp-cql port: 9042 + ## thrift protocol is deprecated . Should be removed. Being left until all project removes it. - name: tcp-thrift port: 9160 - name: tcp-agent diff --git a/kubernetes/common/common/templates/_service.tpl b/kubernetes/common/common/templates/_service.tpl index 075f7965b9..55f73c1635 100644 --- a/kubernetes/common/common/templates/_service.tpl +++ b/kubernetes/common/common/templates/_service.tpl @@ -56,15 +56,18 @@ labels: {{- include "common.labels" $dot | nindent 2 -}} - .dot : environment (.) - .ports : an array of ports - .portType: the type of the service + - .prefix: NodePort prefix to be used + */}} {{- define "common.servicePorts" -}} {{- $portType := .portType -}} {{- $dot := .dot -}} {{- range $index, $port := .ports }} +{{- $portPrefix := default "nodePortPrefix" $port.prefix }} - port: {{ $port.port }} targetPort: {{ $port.name }} {{- if (eq $portType "NodePort") }} - nodePort: {{ $dot.Values.global.nodePortPrefix | default $dot.Values.nodePortPrefix }}{{ $port.nodePort }} + nodePort: {{ index $dot.Values "global" $portPrefix | default (index $dot.Values $portPrefix) }}{{ $port.nodePort }} {{- end }} name: {{ $port.name }} {{- end -}} diff --git a/kubernetes/common/dgbuilder/resources/scripts/customSettings.js b/kubernetes/common/dgbuilder/resources/config/customSettings.js index 66b7b5ed15..42c2e5728b 100644 --- a/kubernetes/common/dgbuilder/resources/scripts/customSettings.js +++ b/kubernetes/common/dgbuilder/resources/config/customSettings.js @@ -26,31 +26,31 @@ module.exports={ "sharedDir": "releases/sdnc1.0/flows/shared", "userDir": "releases/sdnc1.0", "httpAuth": { - "user": "dguser", - "pass": "{{.Values.config.dgUserPassword}}" + "user": "${HTTP_USER}", + "pass": "${HTTP_PASSWORD}" }, "dbHost": "{{.Values.config.dbServiceName}}.{{ include "common.namespace" . }}", "dbPort": "3306", - "dbName": "sdnctl", - "dbUser": "sdnctl", - "dbPassword": "{{.Values.config.dbSdnctlPassword}}", + "dbName": "{{.Values.config.db.dbName}}", + "dbUser": "${DB_USER}", + "dbPassword": "${DB_PASSWORD}", "gitLocalRepository": "", "restConfUrl": "http://localhost:8181/restconf/operations/SLI-API:execute-graph", - "restConfUser": "admin", - "restConfPassword": "admin", + "restConfUser": "${REST_CONF_USER}", + "restConfPassword": "${REST_CONF_PASSWORD}", "formatXML": "Y", "formatJSON": "Y", "httpRoot": "/", "disableEditor": false, "httpAdminRoot": "/", "httpAdminAuth": { - "user": "dguser", - "pass": "{{.Values.config.dgUserPassword}}" + "user": "${HTTP_ADMIN_USER}", + "pass": "${HTTP_ADMIN_PASSWORD}" }, "httpNodeRoot": "/", "httpNodeAuth": { - "user": "dguser", - "pass": "{{.Values.config.dgUserPassword}}" + "user": "${HTTP_NODE_USER}", + "pass": "${HTTP_NODE_PASSWORD}" }, "uiHost": "0.0.0.0", "version": "0.9.1", diff --git a/kubernetes/common/dgbuilder/resources/config/svclogic.properties b/kubernetes/common/dgbuilder/resources/config/svclogic.properties index b780cafbcd..28612a270b 100644 --- a/kubernetes/common/dgbuilder/resources/config/svclogic.properties +++ b/kubernetes/common/dgbuilder/resources/config/svclogic.properties @@ -13,7 +13,7 @@ # limitations under the License. org.onap.ccsdk.sli.dbtype=jdbc -org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{.Values.config.dbServiceName}}.{{ include "common.namespace" . }}:3306/sdnctl -org.onap.ccsdk.sli.jdbc.database=sdnctl -org.onap.ccsdk.sli.jdbc.user=sdnctl -org.onap.ccsdk.sli.jdbc.password={{.Values.config.dbSdnctlPassword}} +org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{.Values.config.dbServiceName}}.{{ include "common.namespace" . }}:3306/{{.Values.config.db.dbName}} +org.onap.ccsdk.sli.jdbc.database={{.Values.config.db.dbName}} +org.onap.ccsdk.sli.jdbc.user=${DB_USER} +org.onap.ccsdk.sli.jdbc.password=${DB_PASSWORD} diff --git a/kubernetes/common/dgbuilder/resources/scripts/createReleaseDir.sh b/kubernetes/common/dgbuilder/resources/scripts/createReleaseDir.sh deleted file mode 100755 index b037058c2b..0000000000 --- a/kubernetes/common/dgbuilder/resources/scripts/createReleaseDir.sh +++ /dev/null @@ -1,149 +0,0 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -#!/bin/bash -export PATH=$PATH:. -appDir=$(pwd) -if [ "$#" != 3 -a "$#" != 4 ] -then - echo "Usage $0 releaseDir loginId emailAddress [gitLocalRepository]" - echo "Note: Specify the gitLocalRepository path if you would want to be able to import flows from your local git repository" - exit -fi -if [ ! -e "releases" ] -then - mkdir releases -fi -releaseDir="$1" -name="Release $releaseDir" -loginId="$2" -emailid="$3" -dbHost="{{.Values.config.dbServiceName}}.{{.Release.Namespace}}" -dbPort="3306" -dbName="sdnctl" -dbUser="sdnctl" -dbPassword="{{.Values.config.dbSdnctlPassword}}" -gitLocalRepository="$4" - -lastPort=$(find "releases/" -name "customSettings.js" |xargs grep uiPort|cut -d: -f2|sed -e s/,//|sort|tail -1) -echo $lastPort|grep uiPort >/dev/null 2>&1 -if [ "$?" == "0" ] -then -lastPort=$(find "releases/" -name "customSettings.js" |xargs grep uiPort|cut -d: -f3|sed -e s/,//|sort|tail -1) -fi -#echo $lastPort -if [ "${lastPort}" == "" ] -then - lastPort="3099" -fi -let nextPort=$(expr $lastPort+1) -#echo $nextPort -if [ ! -e "releases/$releaseDir" ] -then -mkdir releases/$releaseDir -cd releases/$releaseDir -mkdir flows -mkdir flows/shared -mkdir flows/shared/backups -mkdir html -mkdir xml -mkdir lib -mkdir lib/flows -mkdir logs -mkdir conf -mkdir codecloud -customSettingsFile="customSettings.js" -if [ ! -e "./$customSettingsFile" ] -then - echo "module.exports = {" >$customSettingsFile - echo " 'name' : '$name'," >>$customSettingsFile - echo " 'emailAddress' :'$emailid'," >>$customSettingsFile - echo " 'uiPort' :$nextPort," >>$customSettingsFile - echo " 'mqttReconnectTime': 15000," >>$customSettingsFile - echo " 'serialReconnectTime' : 15000," >>$customSettingsFile - echo " 'debugMaxLength': 1000," >>$customSettingsFile - echo " 'htmlPath': 'releases/$releaseDir/html/'," >>$customSettingsFile - echo " 'xmlPath': 'releases/$releaseDir/xml/'," >>$customSettingsFile - echo " 'flowFile' : 'releases/$releaseDir/flows/flows.json'," >>$customSettingsFile - echo " 'sharedDir': 'releases/$releaseDir/flows/shared'," >>$customSettingsFile - echo " 'userDir' : 'releases/$releaseDir'," >>$customSettingsFile - echo " 'httpAuth': {user:'$loginId',pass:'cc03e747a6afbbcbf8be7668acfebee5'}," >>$customSettingsFile - echo " 'dbHost': '$dbHost'," >>$customSettingsFile - echo " 'dbPort': '$dbPort'," >>$customSettingsFile - echo " 'dbName': '$dbName'," >>$customSettingsFile - echo " 'dbUser': '$dbUser'," >>$customSettingsFile - echo " 'dbPassword': '$dbPassword'," >>$customSettingsFile - echo " 'gitLocalRepository': '$gitLocalRepository'" >>$customSettingsFile - echo " 'restConfUrl': '$restConfUrl'," >>$customSettingsFile - echo " 'restConfUser': '$restConfUser'," >>$customSettingsFile - echo " 'restConfPassword': '$restConfPassword'," >>$customSettingsFile - echo " 'formatXML': '$formatXML'," >>$customSettingsFile - echo " 'formatJSON': '$formatJSON'," >>$customSettingsFile - echo " 'enableHttps': true" >>$customSettingsFile - echo " }" >>$customSettingsFile -fi - #echo "Created custom settings file $customSettingsFile" - echo "Done ....." -else - echo "ERROR:customSettings file $customSettingsFile already exists for $releaseDir" - exit -fi -#echo "Content of custom settings file" -#echo "============================================================================" -# cat $customSettingsFile -#echo "============================================================================" -svclogicPropFile="./conf/svclogic.properties" -if [ ! -d "${appDir}/yangFiles" ] -then - mkdir -p "${appDir}/yangFiles" -fi -if [ ! -d "${appDir}/generatedJS" ] -then - mkdir -p "${appDir}/generatedJS" -fi - -if [ ! -e "./$svclogicPropFile" ] -then - echo "org.onap.ccsdk.sli.dbtype=jdbc" >$svclogicPropFile - echo "org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{.Values.config.dbServiceName}}.{{.Release.Namespace}}:3306/sdnctl" >>$svclogicPropFile - echo "org.onap.ccsdk.sli.jdbc.database=sdnctl" >>$svclogicPropFile - echo "org.onap.ccsdk.sli.jdbc.user=sdnctl" >>$svclogicPropFile - echo "org.onap.ccsdk.sli.jdbc.password={{.Values.config.dbSdnctlPassword}}" >>$svclogicPropFile -fi -if [ ! -e "${appDir}/flowShareUsers.js" ] -then - echo "module.exports = {\"flowShareUsers\":" >${appDir}/flowShareUsers.js - echo " [" >>${appDir}/flowShareUsers.js - echo " ]" >>${appDir}/flowShareUsers.js - echo "}" >>${appDir}/flowShareUsers.js -fi -grep "$releaseDir" ${appDir}/flowShareUsers.js >/dev/null 2>&1 -if [ "$?" != "0" ] -then - num_of_lines=$(cat ${appDir}/flowShareUsers.js|wc -l) - if [ $num_of_lines -gt 4 ] - then - content=$(head -n -2 ${appDir}/flowShareUsers.js) - echo "${content}," > ${appDir}/flowShareUsers.js - else - content=$(head -n -2 ${appDir}/flowShareUsers.js) - echo "$content" > ${appDir}/flowShareUsers.js - fi - echo " {" >> ${appDir}/flowShareUsers.js - echo " \"name\" : \"$name\"," >> ${appDir}/flowShareUsers.js - echo " \"rootDir\" : \"$releaseDir\"" >> ${appDir}/flowShareUsers.js - echo " }" >> ${appDir}/flowShareUsers.js - echo " ]" >> ${appDir}/flowShareUsers.js - echo "}" >> ${appDir}/flowShareUsers.js -fi diff --git a/kubernetes/common/dgbuilder/templates/configmap.yaml b/kubernetes/common/dgbuilder/templates/configmap.yaml index 24f61b5487..828818c68d 100644 --- a/kubernetes/common/dgbuilder/templates/configmap.yaml +++ b/kubernetes/common/dgbuilder/templates/configmap.yaml @@ -24,16 +24,3 @@ metadata: heritage: {{ .Release.Service }} data: {{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} ---- -apiVersion: v1 -kind: ConfigMap -metadata: - name: {{ include "common.fullname" . }}-scripts - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "resources/scripts/*").AsConfig . | indent 2 }} diff --git a/kubernetes/common/dgbuilder/templates/deployment.yaml b/kubernetes/common/dgbuilder/templates/deployment.yaml index 495c4c6ab6..b3f0ab05a3 100644 --- a/kubernetes/common/dgbuilder/templates/deployment.yaml +++ b/kubernetes/common/dgbuilder/templates/deployment.yaml @@ -32,6 +32,40 @@ spec: spec: initContainers: - command: + - sh + args: + - -c + - "cd /config-input && for PFILE in `ls -1 .`; do envsubst <${PFILE} >/config/${PFILE}; done" + env: + - name: DB_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-user-creds" "key" "login") | indent 10 }} + - name: DB_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-user-creds" "key" "password") | indent 10 }} + - name: HTTP_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "http-user-creds" "key" "login") | indent 10 }} + - name: HTTP_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "http-user-creds" "key" "password") | indent 10 }} + - name: HTTP_ADMIN_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "admin-creds" "key" "login") | indent 10 }} + - name: HTTP_ADMIN_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "admin-creds" "key" "password") | indent 10 }} + - name: HTTP_NODE_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "node-creds" "key" "login") | indent 10 }} + - name: HTTP_NODE_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "node-creds" "key" "password") | indent 10 }} + - name: REST_CONF_USER + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "restconf-creds" "key" "login") | indent 10 }} + - name: REST_CONF_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "restconf-creds" "key" "password") | indent 10 }} + volumeMounts: + - mountPath: /config-input + name: config-input + - mountPath: /config + name: config + image: "{{ .Values.global.envsubstImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-update-config + - command: - /root/ready.py args: - --container-name @@ -59,11 +93,6 @@ spec: initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} env: - - name: MYSQL_ROOT_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: db-root-password - name: SDNC_CONFIG_DIR value: /opt/onap/sdnc/data/properties volumeMounts: @@ -79,10 +108,7 @@ spec: - name: config mountPath: /opt/onap/ccsdk/dgbuilder/svclogic/svclogic.properties subPath: svclogic.properties - - name: scripts - mountPath: /opt/onap/ccsdk/dgbuilder/createReleaseDir.sh - subPath: createReleaseDir.sh - - name: scripts + - name: config mountPath: /opt/onap/ccsdk/dgbuilder/releases/sdnc1.0/customSettings.js subPath: customSettings.js resources: @@ -99,12 +125,11 @@ spec: - name: localtime hostPath: path: /etc/localtime - - name: config + - name: config-input configMap: name: {{ include "common.fullname" . }}-config - - name: scripts - configMap: - name: {{ include "common.fullname" . }}-scripts - defaultMode: 0755 + - name: config + emptyDir: + medium: Memory imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/common/dgbuilder/templates/secrets.yaml b/kubernetes/common/dgbuilder/templates/secrets.yaml index e00d7cfc03..c9a409fdca 100644 --- a/kubernetes/common/dgbuilder/templates/secrets.yaml +++ b/kubernetes/common/dgbuilder/templates/secrets.yaml @@ -1,4 +1,5 @@ # Copyright © 2018 AT&T, Amdocs, Bell Canada +# Copyright © 2020 Samsung Electronics # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -12,16 +13,4 @@ # See the License for the specific language governing permissions and # limitations under the License. -apiVersion: v1 -kind: Secret -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.fullname" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -type: Opaque -data: - db-root-password: {{ .Values.config.dbRootPassword | b64enc | quote }}
\ No newline at end of file +{{ include "common.secret" . }} diff --git a/kubernetes/common/dgbuilder/values.yaml b/kubernetes/common/dgbuilder/values.yaml index fa205e227e..96d7dffb0a 100644 --- a/kubernetes/common/dgbuilder/values.yaml +++ b/kubernetes/common/dgbuilder/values.yaml @@ -31,6 +31,9 @@ global: loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 + # envsusbt + envsubstImage: dibi/envsubst + # image pull policy pullPolicy: Always @@ -43,6 +46,40 @@ global: debugEnabled: true ################################################################# +# Secrets metaconfig +################################################################# +secrets: + - uid: 'db-root-password' + type: password + externalSecret: '{{ tpl (default "" .Values.config.db.rootPasswordExternalSecret) . }}' + password: '{{ .Values.config.dbRootPassword }}' + - uid: 'db-user-creds' + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.config.db.userCredentialsExternalSecret) . }}' + login: '{{ .Values.config.db.userName }}' + password: '{{ .Values.config.dbSdnctlPassword }}' + - uid: 'http-user-creds' + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.config.httpCredsExternalSecret) . }}' + login: '{{ .Values.config.httpUser }}' + password: '{{ .Values.config.dgUserPassword }}' + - uid: 'admin-creds' + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.config.adminCredsExternalSecret) . }}' + login: '{{ .Values.config.adminUser }}' + password: '{{ .Values.config.dgUserPassword }}' + - uid: 'node-creds' + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.config.nodeCredsExternalSecret) . }}' + login: '{{ .Values.config.nodeUser }}' + password: '{{ .Values.config.dgUserPassword }}' + - uid: 'restconf-creds' + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.config.restconfCredsExternalSecret) . }}' + login: '{{ .Values.config.restconfUser }}' + password: '{{ .Values.config.restconfPassword }}' + +################################################################# # Application configuration defaults. ################################################################# # application image @@ -55,6 +92,32 @@ debugEnabled: false # application configuration config: + db: + dbName: sdnctl + # unused for now to preserve the API + rootPassword: openECOMP1.0 + # rootPasswordExternalSecret: some secret + userName: sdnctl + # unused for now to preserve the API + userPassword: gamma + # userCredentialsExternalSecret: some secret + httpUser: dguser + # unused for now to preserve the API + httpPassword: cc03e747a6afbbcbf8be7668acfebee5 + # httpCredsExternalSecret: some secret + adminUser: dguser + # unused for now to preserve the API + adminPassword: cc03e747a6afbbcbf8be7668acfebee5 + # adminCredsExternalSecret: some secret + nodeUser: dguser + # unused for now to preserve the API + nodePassword: cc03e747a6afbbcbf8be7668acfebee5 + # nodeCredsExternalSecret: some secret + restconfUser: admin + # unused for now to preserve the API + restconfPassword: admin + # restconfCredsExternalSecret: some secret + dbRootPassword: openECOMP1.0 dbSdnctlPassword: gamma dbPodName: mysql-db diff --git a/kubernetes/common/network-name-gen/requirements.yaml b/kubernetes/common/network-name-gen/requirements.yaml index 9ef8db89a4..eda693f832 100644 --- a/kubernetes/common/network-name-gen/requirements.yaml +++ b/kubernetes/common/network-name-gen/requirements.yaml @@ -18,4 +18,9 @@ dependencies: repository: '@local'
- name: mariadb-galera
version: ~5.x-0
- repository: file://../mariadb-galera/
+ repository: '@local'
+ condition: global.mariadbGalera.localCluster
+ - name: mariadb-init
+ version: ~5.x-0
+ repository: '@local'
+ condition: not global.mariadbGalera.localCluster
diff --git a/kubernetes/common/network-name-gen/templates/deployment.yaml b/kubernetes/common/network-name-gen/templates/deployment.yaml index 2f9cd6a158..a6d18e7a59 100644 --- a/kubernetes/common/network-name-gen/templates/deployment.yaml +++ b/kubernetes/common/network-name-gen/templates/deployment.yaml @@ -31,11 +31,19 @@ spec: release: {{ include "common.release" . }} spec: initContainers: +{{- if .Values.global.mariadbGalera.localCluster }} - command: - /root/ready.py args: - --container-name - {{ index .Values "mariadb-galera" "nameOverride" }} +{{- else }} + - command: + - /root/job_complete.py + args: + - --job-name + - {{ include "common.release" . }}-{{ index .Values "mariadb-init" "nameOverride" }}-config-job +{{- end }} env: - name: NAMESPACE valueFrom: @@ -53,11 +61,11 @@ spec: - name: SPRING_PROFILE value: "{{ .Values.config.springProfile }}" - name: NENG_DB_USER - {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-user-creds" "key" "login") | indent 10}} + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "neng-db-secret" "key" "login") | indent 10}} - name: NENG_DB_PASS - {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-user-creds" "key" "password") | indent 10}} + {{- include "common.secret.envFromSecret" (dict "global" . "uid" "neng-db-secret" "key" "password") | indent 10}} - name: NENG_DB_URL - value: {{ .Values.config.dbUrl }} + value: jdbc:mysql://{{ include "common.mariadbService" . }}:{{ include "common.mariadbPort" . }}/{{ index .Values "mariadb-galera" "config" "mysqlDatabase" }} - name: POL_CLIENT_AUTH value: "{{ .Values.config.polClientAuth }}" - name: POL_BASIC_AUTH diff --git a/kubernetes/common/network-name-gen/values.yaml b/kubernetes/common/network-name-gen/values.yaml index d5897013c4..0defa97c26 100644 --- a/kubernetes/common/network-name-gen/values.yaml +++ b/kubernetes/common/network-name-gen/values.yaml @@ -32,24 +32,29 @@ global: # image pull policy pullPolicy: IfNotPresent + mariadbGalera: &mariadbGalera + #This flag allows SO to instantiate its own mariadb-galera cluster + localCluster: false + service: mariadb-galera + internalPort: 3306 + nameOverride: mariadb-galera + ################################################################# # Secrets metaconfig ################################################################# secrets: - - uid: "db-user-creds" - externalSecret: '{{- include "common.mariadb.secret.userCredentialsSecretName" (dict "dot" . "chartName" (index .Values "mariadb-galera" "nameOverride")) }}' + - uid: neng-db-secret + name: '{{ include "common.release" . }}-neng-db-secret' type: basicAuth - - uid: "db-root-pass" - externalSecret: '{{- include "common.mariadb.secret.rootPassSecretName" (dict "dot" . "chartName" (index .Values "mariadb-galera" "nameOverride")) }}' - type: password + externalSecret: '{{ tpl (default "" .Values.config.db.userCredentialsExternalSecret) . }}' + login: '{{ .Values.config.db.userName }}' + password: '{{ .Values.config.db.userPassword }}' # sub-chart config mariadb-galera: - config: - userName: nenguser - userPassword: nenguser123 - mariadbRootPassword: nenguser123 - mysqlDatabase: nengdb + config: &mariadbConfig + userCredentialsExternalSecret: '{{ include "common.release" . }}-neng-db-secret' + mysqlDatabase: nengdb nameOverride: nengdb service: name: nengdb @@ -59,6 +64,9 @@ mariadb-galera: enabled: true mountSubPath: network-name-gen/data +mariadb-init: + config: *mariadbConfig + nameOverride: nengdb-init ################################################################# # Application configuration defaults. @@ -70,7 +78,10 @@ pullPolicy: IfNotPresent # application configuration config: - dbUrl: jdbc:mysql://nengdb:3306/nengdb + db: + userName: nenguser + # userPassword: password + # userCredentialsExternalSecret: some-secret springProfile: live polClientAuth: cHl0aG9uOnRlc3Q= polBasicAuth: dGVzdHBkcDphbHBoYTEyMw== diff --git a/kubernetes/common/postgres-legacy/.helmignore b/kubernetes/common/postgres-legacy/.helmignore deleted file mode 100644 index f0c1319444..0000000000 --- a/kubernetes/common/postgres-legacy/.helmignore +++ /dev/null @@ -1,21 +0,0 @@ -# Patterns to ignore when building packages. -# This supports shell glob matching, relative path matching, and -# negation (prefixed with !). Only one pattern per line. -.DS_Store -# Common VCS dirs -.git/ -.gitignore -.bzr/ -.bzrignore -.hg/ -.hgignore -.svn/ -# Common backup files -*.swp -*.bak -*.tmp -*~ -# Various IDEs -.project -.idea/ -*.tmproj diff --git a/kubernetes/common/postgres-legacy/Chart.yaml b/kubernetes/common/postgres-legacy/Chart.yaml deleted file mode 100644 index eff8e36eba..0000000000 --- a/kubernetes/common/postgres-legacy/Chart.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -description: ONAP Postgres Server -name: postgres-legacy -version: 5.0.0 diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml deleted file mode 100644 index e2818139fa..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -description: ONAP Postgres Server -name: pgpool -version: 5.0.0 diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf deleted file mode 100644 index f335174f40..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf +++ /dev/null @@ -1,677 +0,0 @@ -# ---------------------------- -# pgPool-II configuration file a custom version -# ---------------------------- -# -# This file consists of lines of the form: -# -# name = value -# -# Whitespace may be used. Comments are introduced with "#" anywhere on a line. -# The complete list of parameter names and allowed values can be found in the -# pgPool-II documentation. -# -# This file is read on server startup and when the server receives a SIGHUP -# signal. If you edit the file on a running system, you have to SIGHUP the -# server for the changes to take effect, or use "pgpool reload". Some -# parameters, which are marked below, require a server shutdown and restart to -# take effect. -# - - -#------------------------------------------------------------------------------ -# CONNECTIONS -#------------------------------------------------------------------------------ - -# - pgpool Connection Settings - - -listen_addresses = '*' - # Host name or IP address to listen on: - # '*' for all, '' for no TCP/IP connections - # (change requires restart) -#port = 9999 -port = 5432 - # Port number - # (change requires restart) -socket_dir = '/tmp' - # Unix domain socket path - # The Debian package defaults to - # /var/run/postgresql - # (change requires restart) - - -# - pgpool Communication Manager Connection Settings - - -pcp_port = 9898 - # Port number for pcp - # (change requires restart) -pcp_socket_dir = '/tmp' - # Unix domain socket path for pcp - # The Debian package defaults to - # /var/run/postgresql - # (change requires restart) - -# - Backend Connection Settings - - -backend_hostname0 = '{{.Values.container.name.primary}}' -backend_port0 = 5432 -backend_weight0= 1 -backend_flag0= 'DISALLOW_TO_FAILOVER' - -backend_hostname1 = '{{.Values.container.name.replica}}' -backend_port1 = 5432 -backend_weight1= 1 -backend_flag1= 'DISALLOW_TO_FAILOVER' - -#backend_hostname0 = 'master' - # Host name or IP address to connect to for backend 0 -#backend_port0 = 5432 - # Port number for backend 0 -#backend_weight0 = 1 - # Weight for backend 0 (only in load balancing mode) -#backend_data_directory0 = '/data' - # Data directory for backend 0 -#backend_flag0 = 'ALLOW_TO_FAILOVER' - # Controls various backend behavior - # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER -#backend_hostname1 = 'standby' -#backend_port1 = 5432 -#backend_weight1 = 1 -#backend_data_directory1 = '/data1' -#backend_flag1 = 'ALLOW_TO_FAILOVER' - -# - Authentication - - -enable_pool_hba = on - # Use pool_hba.conf for client authentication -pool_passwd = 'pool_passwd' - # File name of pool_passwd for md5 authentication. - # "" disables pool_passwd. - # (change requires restart) -authentication_timeout = 60 - # Delay in seconds to complete client authentication - # 0 means no timeout. - -# - SSL Connections - - -ssl = off - # Enable SSL support - # (change requires restart) -#ssl_key = './server.key' - # Path to the SSL private key file - # (change requires restart) -#ssl_cert = './server.cert' - # Path to the SSL public certificate file - # (change requires restart) -#ssl_ca_cert = '' - # Path to a single PEM format file - # containing CA root certificate(s) - # (change requires restart) -#ssl_ca_cert_dir = '' - # Directory containing CA root certificate(s) - # (change requires restart) - - -#------------------------------------------------------------------------------ -# POOLS -#------------------------------------------------------------------------------ - -# - Pool size - - -num_init_children = 5 - # Number of pools - # (change requires restart) -max_pool = 1 - # Number of connections per pool - # (change requires restart) - -# - Life time - - -child_life_time = 300 - # Pool exits after being idle for this many seconds -child_max_connections = 0 - # Pool exits after receiving that many connections - # 0 means no exit -connection_life_time = 0 - # Connection to backend closes after being idle for this many seconds - # 0 means no close -client_idle_limit = 0 - # Client is disconnected after being idle for that many seconds - # (even inside an explicit transactions!) - # 0 means no disconnection - - -#------------------------------------------------------------------------------ -# LOGS -#------------------------------------------------------------------------------ - -# - Where to log - - -log_destination = 'stderr' - # Where to log - # Valid values are combinations of stderr, - # and syslog. Default to stderr. - -# - What to log - - -print_timestamp = on - # Print timestamp on each line - # (change requires restart) - -log_connections = on - # Log connections -log_hostname = on - # Hostname will be shown in ps status - # and in logs if connections are logged -log_statement = on - # Log all statements -log_per_node_statement = off - # Log all statements - # with node and backend informations -log_standby_delay = 'if_over_threshold' - # Log standby delay - # Valid values are combinations of always, - # if_over_threshold, none - -# - Syslog specific - - -syslog_facility = 'LOCAL0' - # Syslog local facility. Default to LOCAL0 -syslog_ident = 'pgpool' - # Syslog program identification string - # Default to 'pgpool' - -# - Debug - - -debug_level = 1 - # Debug message verbosity level - # 0 means no message, 1 or more mean verbose - - -#------------------------------------------------------------------------------ -# FILE LOCATIONS -#------------------------------------------------------------------------------ - -pid_file_name = '/tmp/pgpool.pid' - # PID file name - # (change requires restart) -logdir = '/tmp' - # Directory of pgPool status file - # (change requires restart) - - -#------------------------------------------------------------------------------ -# CONNECTION POOLING -#------------------------------------------------------------------------------ - -connection_cache = off - # Activate connection pools - # (change requires restart) - - # Semicolon separated list of queries - # to be issued at the end of a session - # The default is for 8.3 and later -reset_query_list = 'ABORT; DISCARD ALL' - # The following one is for 8.2 and before -#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT' - - -#------------------------------------------------------------------------------ -# REPLICATION MODE -#------------------------------------------------------------------------------ - -replication_mode = off - # Activate replication mode - # (change requires restart) -replicate_select = off - # Replicate SELECT statements - # when in replication or parallel mode - # replicate_select is higher priority than - # load_balance_mode. - -insert_lock = off - # Automatically locks a dummy row or a table - # with INSERT statements to keep SERIAL data - # consistency - # Without SERIAL, no lock will be issued -lobj_lock_table = '' - # When rewriting lo_creat command in - # replication mode, specify table name to - # lock - -# - Degenerate handling - - -replication_stop_on_mismatch = off - # On disagreement with the packet kind - # sent from backend, degenerate the node - # which is most likely "minority" - # If off, just force to exit this session - -failover_if_affected_tuples_mismatch = off - # On disagreement with the number of affected - # tuples in UPDATE/DELETE queries, then - # degenerate the node which is most likely - # "minority". - # If off, just abort the transaction to - # keep the consistency - - -#------------------------------------------------------------------------------ -# LOAD BALANCING MODE -#------------------------------------------------------------------------------ - -load_balance_mode = on - # Activate load balancing mode - # (change requires restart) -ignore_leading_white_space = on - # Ignore leading white spaces of each query -white_function_list = '' - # Comma separated list of function names - # that don't write to database - # Regexp are accepted -black_function_list = 'currval,lastval,nextval,setval' - # Comma separated list of function names - # that write to database - # Regexp are accepted - - -#------------------------------------------------------------------------------ -# MASTER/SLAVE MODE -#------------------------------------------------------------------------------ - -master_slave_mode = on - # Activate master/slave mode - # (change requires restart) -master_slave_sub_mode = 'stream' - # Master/slave sub mode - # Valid values are combinations slony or - # stream. Default is slony. - # (change requires restart) - -# - Streaming - - -sr_check_period = 10 - # Streaming replication check period - # Disabled (0) by default -sr_check_user = '{{.Values.credentials.pgusername}}' - # Streaming replication check user - # This is neccessary even if you disable streaming - # replication delay check by sr_check_period = 0 -sr_check_password = '{{.Values.credentials.pgpassword}}' - # Password for streaming replication check user -delay_threshold = 10000000 - # Threshold before not dispatching query to standby node - # Unit is in bytes - # Disabled (0) by default - -# - Special commands - - -follow_master_command = '' - # Executes this command after master failover - # Special values: - # %d = node id - # %h = host name - # %p = port number - # %D = database cluster path - # %m = new master node id - # %H = hostname of the new master node - # %M = old master node id - # %P = old primary node id - # %r = new master port number - # %R = new master database cluster path - # %% = '%' character - - -#------------------------------------------------------------------------------ -# PARALLEL MODE -#------------------------------------------------------------------------------ - -parallel_mode = off - # Activates parallel query mode - # (change requires restart) -pgpool2_hostname = '' - # Set pgpool2 hostname - # (change requires restart) - -# - System DB info - - -#system_db_hostname = 'localhost' - # (change requires restart) -#system_db_port = 5432 - # (change requires restart) -#system_db_dbname = 'pgpool' - # (change requires restart) -#system_db_schema = 'pgpool_catalog' - # (change requires restart) -#system_db_user = 'pgpool' - # (change requires restart) -#system_db_password = '' - # (change requires restart) - - -#------------------------------------------------------------------------------ -# HEALTH CHECK -#------------------------------------------------------------------------------ - -health_check_period = 20 - # Health check period - # Disabled (0) by default -health_check_timeout = 10 - # Health check timeout - # 0 means no timeout -health_check_user = '{{.Values.credentials.pgusername}}' - # Health check user -health_check_password = '{{.Values.credentials.pgpassword}}' - # Password for health check user -health_check_max_retries = 3 -connect_timeout = 10000 # Timeout value in milliseconds before giving up to connect to backend. - - # Maximum number of times to retry a failed health check before giving up. -health_check_retry_delay = 1 - # Amount of time to wait (in seconds) between retries. - - -#------------------------------------------------------------------------------ -# FAILOVER AND FAILBACK -#------------------------------------------------------------------------------ - -failover_command = '' - # Executes this command at failover - # Special values: - # %d = node id - # %h = host name - # %p = port number - # %D = database cluster path - # %m = new master node id - # %H = hostname of the new master node - # %M = old master node id - # %P = old primary node id - # %r = new master port number - # %R = new master database cluster path - # %% = '%' character -failback_command = '' - # Executes this command at failback. - # Special values: - # %d = node id - # %h = host name - # %p = port number - # %D = database cluster path - # %m = new master node id - # %H = hostname of the new master node - # %M = old master node id - # %P = old primary node id - # %r = new master port number - # %R = new master database cluster path - # %% = '%' character - -fail_over_on_backend_error = off - # Initiates failover when reading/writing to the - # backend communication socket fails - # If set to off, pgpool will report an - # error and disconnect the session. - -search_primary_node_timeout = 10 - # Timeout in seconds to search for the - # primary node when a failover occurs. - # 0 means no timeout, keep searching - # for a primary node forever. - -#------------------------------------------------------------------------------ -# ONLINE RECOVERY -#------------------------------------------------------------------------------ - -recovery_user = '{{.Values.credentials.pgusername}}' - # Online recovery user -recovery_password = '{{.Values.credentials.pgpassword}}' - # Online recovery password -recovery_1st_stage_command = '' - # Executes a command in first stage -recovery_2nd_stage_command = '' - # Executes a command in second stage -recovery_timeout = 90 - # Timeout in seconds to wait for the - # recovering node's postmaster to start up - # 0 means no wait -client_idle_limit_in_recovery = 0 - # Client is disconnected after being idle - # for that many seconds in the second stage - # of online recovery - # 0 means no disconnection - # -1 means immediate disconnection - - -#------------------------------------------------------------------------------ -# WATCHDOG -#------------------------------------------------------------------------------ - -# - Enabling - - -use_watchdog = off - # Activates watchdog - # (change requires restart) - -# -Connection to up stream servers - - -trusted_servers = '' - # trusted server list which are used - # to confirm network connection - # (hostA,hostB,hostC,...) - # (change requires restart) -ping_path = '/bin' - # ping command path - # (change requires restart) - -# - Watchdog communication Settings - - -wd_hostname = '' - # Host name or IP address of this watchdog - # (change requires restart) -wd_port = 9000 - # port number for watchdog service - # (change requires restart) -wd_authkey = '' - # Authentication key for watchdog communication - # (change requires restart) - -# - Virtual IP control Setting - - -delegate_IP = '' - # delegate IP address - # If this is empty, virtual IP never bring up. - # (change requires restart) -ifconfig_path = '/sbin' - # ifconfig command path - # (change requires restart) -if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0' - # startup delegate IP command - # (change requires restart) -if_down_cmd = 'ifconfig eth0:0 down' - # shutdown delegate IP command - # (change requires restart) - -arping_path = '/usr/sbin' # arping command path - # (change requires restart) - -arping_cmd = 'arping -U $_IP_$ -w 1' - # arping command - # (change requires restart) - -# - Behaivor on escalation Setting - - -clear_memqcache_on_escalation = on - # Clear all the query cache on shared memory - # when standby pgpool escalate to active pgpool - # (= virtual IP holder). - # This should be off if client connects to pgpool - # not using virtual IP. - # (change requires restart) -wd_escalation_command = '' - # Executes this command at escalation on new active pgpool. - # (change requires restart) - -# - Lifecheck Setting - - -# -- common -- - -wd_lifecheck_method = 'heartbeat' - # Method of watchdog lifecheck ('heartbeat' or 'query') - # (change requires restart) -wd_interval = 10 - # lifecheck interval (sec) > 0 - # (change requires restart) - -# -- heartbeat mode -- - -wd_heartbeat_port = 9694 - # Port number for receiving heartbeat signal - # (change requires restart) -wd_heartbeat_keepalive = 2 - # Interval time of sending heartbeat signal (sec) - # (change requires restart) -wd_heartbeat_deadtime = 30 - # Deadtime interval for heartbeat signal (sec) - # (change requires restart) -heartbeat_destination0 = 'host0_ip1' - # Host name or IP address of destination 0 - # for sending heartbeat signal. - # (change requires restart) -heartbeat_destination_port0 = 9694 - # Port number of destination 0 for sending - # heartbeat signal. Usually this is the - # same as wd_heartbeat_port. - # (change requires restart) -heartbeat_device0 = '' - # Name of NIC device (such like 'eth0') - # used for sending/receiving heartbeat - # signal to/from destination 0. - # This works only when this is not empty - # and pgpool has root privilege. - # (change requires restart) - -#heartbeat_destination1 = 'host0_ip2' -#heartbeat_destination_port1 = 9694 -#heartbeat_device1 = '' - -# -- query mode -- - -wd_life_point = 3 - # lifecheck retry times - # (change requires restart) -wd_lifecheck_query = 'SELECT 1' - # lifecheck query to pgpool from watchdog - # (change requires restart) -wd_lifecheck_dbname = 'template1' - # Database name connected for lifecheck - # (change requires restart) -wd_lifecheck_user = 'nobody' - # watchdog user monitoring pgpools in lifecheck - # (change requires restart) -wd_lifecheck_password = '' - # Password for watchdog user in lifecheck - # (change requires restart) - -# - Other pgpool Connection Settings - - -#other_pgpool_hostname0 = 'host0' - # Host name or IP address to connect to for other pgpool 0 - # (change requires restart) -#other_pgpool_port0 = 5432 - # Port number for othet pgpool 0 - # (change requires restart) -#other_wd_port0 = 9000 - # Port number for othet watchdog 0 - # (change requires restart) -#other_pgpool_hostname1 = 'host1' -#other_pgpool_port1 = 5432 -#other_wd_port1 = 9000 - - -#------------------------------------------------------------------------------ -# OTHERS -#------------------------------------------------------------------------------ -relcache_expire = 0 - # Life time of relation cache in seconds. - # 0 means no cache expiration(the default). - # The relation cache is used for cache the - # query result against PostgreSQL system - # catalog to obtain various information - # including table structures or if it's a - # temporary table or not. The cache is - # maintained in a pgpool child local memory - # and being kept as long as it survives. - # If someone modify the table by using - # ALTER TABLE or some such, the relcache is - # not consistent anymore. - # For this purpose, cache_expiration - # controls the life time of the cache. -relcache_size = 256 - # Number of relation cache - # entry. If you see frequently: - # "pool_search_relcache: cache replacement happend" - # in the pgpool log, you might want to increate this number. - -check_temp_table = on - # If on, enable temporary table check in SELECT statements. - # This initiates queries against system catalog of primary/master - # thus increases load of master. - # If you are absolutely sure that your system never uses temporary tables - # and you want to save access to primary/master, you could turn this off. - # Default is on. - - -#------------------------------------------------------------------------------ -# ON MEMORY QUERY MEMORY CACHE -#------------------------------------------------------------------------------ -memory_cache_enabled = off - # If on, use the memory cache functionality, off by default -memqcache_method = 'shmem' - # Cache storage method. either 'shmem'(shared memory) or - # 'memcached'. 'shmem' by default - # (change requires restart) -memqcache_memcached_host = 'localhost' - # Memcached host name or IP address. Mandatory if - # memqcache_method = 'memcached'. - # Defaults to localhost. - # (change requires restart) -memqcache_memcached_port = 11211 - # Memcached port number. Mondatory if memqcache_method = 'memcached'. - # Defaults to 11211. - # (change requires restart) -memqcache_total_size = 67108864 - # Total memory size in bytes for storing memory cache. - # Mandatory if memqcache_method = 'shmem'. - # Defaults to 64MB. - # (change requires restart) -memqcache_max_num_cache = 1000000 - # Total number of cache entries. Mandatory - # if memqcache_method = 'shmem'. - # Each cache entry consumes 48 bytes on shared memory. - # Defaults to 1,000,000(45.8MB). - # (change requires restart) -memqcache_expire = 0 - # Memory cache entry life time specified in seconds. - # 0 means infinite life time. 0 by default. - # (change requires restart) -memqcache_auto_cache_invalidation = on - # If on, invalidation of query cache is triggered by corresponding - # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered - # by memqcache_expire. on by default. - # (change requires restart) -memqcache_maxcache = 409600 - # Maximum SELECT result size in bytes. - # Must be smaller than memqcache_cache_block_size. Defaults to 400KB. - # (change requires restart) -memqcache_cache_block_size = 1048576 - # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'. - # Defaults to 1MB. - # (change requires restart) -memqcache_oiddir = '/var/log/pgpool/oiddir' - # Temporary work directory to record table oids - # (change requires restart) -white_memqcache_table_list = '' - # Comma separated list of table names to memcache - # that don't write to database - # Regexp are accepted -black_memqcache_table_list = '' - # Comma separated list of table names not to memcache - # that don't write to database - # Regexp are accepted diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf deleted file mode 100644 index d8918409e8..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf +++ /dev/null @@ -1,67 +0,0 @@ -# pgpool Client Authentication Configuration File a custom version -# =============================================== -# -# The format rule in this file follows the rules in the PostgreSQL -# Administrator's Guide. Refer to chapter "Client Authentication" for a -# complete description. A short synopsis follows. -# -# This file controls: which hosts are allowed to connect, how clients -# are authenticated, which user names they can use, which databases they -# can access. Records take one of these forms: -# -# local DATABASE USER METHOD [OPTION] -# host DATABASE USER CIDR-ADDRESS METHOD [OPTION] -# -# (The uppercase items must be replaced by actual values.) -# -# The first field is the connection type: "local" is a Unix-domain -# socket, "host" is either a plain or SSL-encrypted TCP/IP socket. -# -# DATABASE can be "all", "sameuser", a database name, or a comma-separated -# list thereof. Note that "samegroup" like in PostgreSQL's pg_hba.conf -# file is not supported, since pgpool does not know which group a user -# belongs to. Also note that the database specified here may not exist in -# the backend PostgreSQL. pgpool will authenticate based on the database's -# name, not based on whether it exists or not. -# -# USER can be "all", a user name, or a comma-separated list thereof. In -# both the DATABASE and USER fields you can also write a file name prefixed -# with "@" to include names from a separate file. Note that a group name -# prefixed with "+" like in PostgreSQL's pg_hba.conf file is not supported -# because of the same reason as "samegroup" token. Also note that a user -# name specified here may not exist in the backend PostgreSQL. pgpool will -# authenticate based on the user's name, not based on whether he/she exists. -# -# CIDR-ADDRESS specifies the set of hosts the record matches. -# It is made up of an IP address and a CIDR mask that is an integer -# (between 0 and 32 (IPv4) that specifies the number of significant bits in -# the mask. Alternatively, you can write an IP address and netmask in -# separate columns to specify the set of hosts. -# -# METHOD can be "trust", "reject", "md5" or "pam". Note that "pam" sends passwords -# in clear text. -# -# OPTION is the name of the PAM service. Default service name is "pgpool" -# -# Database and user names containing spaces, commas, quotes and other special -# characters must be quoted. Quoting one of the keywords "all" or "sameuser" -# makes the name lose its special character, and just match a database or -# username with that name. -# -# This file is read on pgpool startup. If you edit the file on a running -# system, you have to restart the pgpool for the changes to take effect. - -# Put your actual configuration here -# ---------------------------------- -# -# If you want to allow non-local connections, you need to add more -# "host" records. In that case you will also need to make pgpool listen -# on a non-local interface via the listen_addresses configuration parameter. -# - -# TYPE DATABASE USER CIDR-ADDRESS METHOD - -# "local" is for Unix domain socket connections only -#local all all trust -# IPv4 local connections: -host all all 0.0.0.0/0 md5 diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd deleted file mode 100644 index 3636d1de74..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd +++ /dev/null @@ -1,2 +0,0 @@ -testuser:md599e8713364988502fa6189781bcf648f -postgres:md53175bce1d3201d16594cebf9d7eb3f9d diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml deleted file mode 100644 index 5b097f3ab7..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -dependencies: - - name: common - version: ~5.x-0 - repository: '@local' diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml deleted file mode 100755 index 099c8dd12e..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml +++ /dev/null @@ -1,26 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -kind: ConfigMap -metadata: - name: {{ include "common.fullname" . }}-pgpool-configmap - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "configs/*").AsConfig . | indent 2 }} diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml deleted file mode 100644 index 7572d7f444..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml +++ /dev/null @@ -1,68 +0,0 @@ -{{/* -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} -kind: Deployment -apiVersion: extensions/v1beta1 -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -spec: - replicas: 2 - template: - metadata: - labels: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} - spec: - containers: - - image: "{{.Values.repository}}/{{.Values.image}}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - name: {{ include "common.name" . }} - env: - - name: PG_PRIMARY_SERVICE_NAME - value: {{.Values.container.name.primary}} - - name: PG_REPLICA_SERVICE_NAME - value: {{.Values.container.name.replica}} - - name: PG_USERNAME - value: {{.Values.credentials.pgusername}} - - name: PG_PASSWORD - value: {{.Values.credentials.pgpassword}} - ports: - - containerPort: 5432 - name: pgpool - protocol: TCP - readinessProbe: - tcpSocket: - port: 5432 - initialDelaySeconds: 20 - periodSeconds: 10 - livenessProbe: - tcpSocket: - port: 5432 - initialDelaySeconds: 15 - periodSeconds: 20 - volumeMounts: - - name: pgpool-pgconf - mountPath: /pgconf/pgpoolconfigdir - readOnly: false - volumes: - - name: pgpool-pgconf - configMap: - name: {{ include "common.fullname" . }}-pgpool-configmap diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml deleted file mode 100644 index 8c066e5b7a..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml +++ /dev/null @@ -1,26 +0,0 @@ -apiVersion: v1 -kind: Service -metadata: - name: {{ .Values.service.name }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - annotations: -spec: - type: {{ .Values.service.type }} - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.name }} - {{- else -}} - - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.name }} - {{- end}} - selector: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/values.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/values.yaml deleted file mode 100644 index cb732b7cd7..0000000000 --- a/kubernetes/common/postgres-legacy/charts/pgpool/values.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -################################################################# -# Global configuration defaults. -################################################################# -global: - nodePortPrefix: 302 - persistence: {} - readinessRepository: oomk8s - readinessImage: readiness-check:2.0.0 - -################################################################# -# Application configuration defaults. -################################################################# -# application image -repository: crunchydata -image: crunchy-pgpool:centos7-10.4-2.0.0 -pullPolicy: Always - -container: - port: 5432 - name: - primary: pgset-primary - replica: pgset-replica -credentials: - pgusername: testuser - pgpassword: password -service: - name: pgpool - type: ClusterIP - externalPort: 5432 - internalPort: 5432 diff --git a/kubernetes/common/postgres-legacy/requirements.yaml b/kubernetes/common/postgres-legacy/requirements.yaml deleted file mode 100644 index 5b097f3ab7..0000000000 --- a/kubernetes/common/postgres-legacy/requirements.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -dependencies: - - name: common - version: ~5.x-0 - repository: '@local' diff --git a/kubernetes/common/postgres-legacy/templates/pv.yaml b/kubernetes/common/postgres-legacy/templates/pv.yaml deleted file mode 100644 index 2ac5d979d5..0000000000 --- a/kubernetes/common/postgres-legacy/templates/pv.yaml +++ /dev/null @@ -1,45 +0,0 @@ -{{/* -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} -{{- $global := . }} -{{- if and $global.Values.persistence.enabled (not $global.Values.persistence.existingClaim) }} -{{- if eq "True" (include "common.needPV" .) -}} -{{- range $i := until (int $global.Values.replicaCount)}} -kind: PersistentVolume -apiVersion: v1 -metadata: - name: {{ include "common.fullname" $global }}-data-{{ $i }} - namespace: {{ include "common.namespace" $global }} - labels: - app: {{ include "common.fullname" $global }} - chart: "{{ $global.Chart.Name }}-{{ $global.Chart.Version | replace "+" "_" }}" - release: "{{ include "common.release" $global }}" - heritage: "{{ $global.Release.Service }}" - name: {{ include "common.fullname" $global }} -spec: - capacity: - storage: {{ $global.Values.persistence.size}} - accessModes: - - {{ $global.Values.persistence.accessMode }} - persistentVolumeReclaimPolicy: {{ $global.Values.persistence.volumeReclaimPolicy }} - storageClassName: "{{ include "common.fullname" $global }}-data" - hostPath: - path: {{ $global.Values.global.persistence.mountPath | default $global.Values.persistence.mountPath }}/{{ include "common.release" $global }}/{{ $global.Values.persistence.mountSubPath }}-{{$i}} -{{if ne $i (int $global.Values.replicaCount) }} ---- -{{- end -}} -{{- end -}} -{{- end -}} -{{- end -}} diff --git a/kubernetes/common/postgres-legacy/templates/secrets.yaml b/kubernetes/common/postgres-legacy/templates/secrets.yaml deleted file mode 100644 index db1bc5bb15..0000000000 --- a/kubernetes/common/postgres-legacy/templates/secrets.yaml +++ /dev/null @@ -1,31 +0,0 @@ -{{/* -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} -apiVersion: v1 -kind: Secret -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.fullname" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -type: Opaque -data: - pg-primary-password: {{ .Values.config.pgPrimaryPassword | b64enc | quote }} - pg-user-password: {{ .Values.config.pgUserPassword | b64enc | quote }} - pg-root-password: {{ .Values.config.pgRootPassword | b64enc | quote }} - diff --git a/kubernetes/common/postgres-legacy/templates/service.yaml b/kubernetes/common/postgres-legacy/templates/service.yaml deleted file mode 100644 index 30d824bbd7..0000000000 --- a/kubernetes/common/postgres-legacy/templates/service.yaml +++ /dev/null @@ -1,95 +0,0 @@ -{{/* -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} -apiVersion: v1 -kind: Service -metadata: - name: {{ .Values.service.name }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - annotations: -spec: - type: {{ .Values.service.type }} - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.name }} - {{- else -}} - - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.name }} - {{- end}} - selector: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} ---- -apiVersion: v1 -kind: Service -metadata: - name: {{ .Values.service.name2 }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - annotations: -spec: - type: {{ .Values.service.type2 }} - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort2 }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }} - name: {{ .Values.service.name2 }} - {{- else -}} - - port: {{ .Values.service.externalPort2 }} - targetPort: {{ .Values.service.internalPort2 }} - name: {{ .Values.service.name2 }} - {{- end}} - selector: - name: "{{.Values.container.name.primary}}" - release: {{ include "common.release" . }} ---- -apiVersion: v1 -kind: Service -metadata: - name: {{ .Values.service.name3 }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - annotations: -spec: - type: {{ .Values.service.type3 }} - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort3 }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }} - name: {{ .Values.service.name3 }} - {{- else -}} - - port: {{ .Values.service.externalPort3 }} - targetPort: {{ .Values.service.internalPort3 }} - name: {{ .Values.service.name3 }} - {{- end}} - selector: - name: "{{.Values.container.name.replica}}" - release: {{ include "common.release" . }} diff --git a/kubernetes/common/postgres-legacy/templates/statefulset.yaml b/kubernetes/common/postgres-legacy/templates/statefulset.yaml deleted file mode 100644 index 5333a0d310..0000000000 --- a/kubernetes/common/postgres-legacy/templates/statefulset.yaml +++ /dev/null @@ -1,143 +0,0 @@ -{{/* -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} -apiVersion: apps/v1beta1 -kind: StatefulSet -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -spec: - serviceName: {{ .Values.service.name }} - replicas: {{ .Values.replicaCount }} - template: - metadata: - labels: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} - spec: - initContainers: - - command: - - /bin/sh - - -c - - | - chown -R 26:26 /podroot/; - chmod 700 /podroot/; - image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }} - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - name: {{ include "common.name" . }}-prepare - volumeMounts: - - name: {{ include "common.fullname" . }}-data - mountPath: /podroot/ - containers: - - name: {{ include "common.name" . }} - image: "{{ .Values.postgresRepository }}/{{ .Values.image }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - ports: - - containerPort: {{ .Values.service.internalPort }} - name: postgres - # disable liveness probe when breakpoints set in debugger - # so K8s doesn't restart unresponsive container - {{- if eq .Values.liveness.enabled true }} - livenessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} - periodSeconds: {{ .Values.liveness.periodSeconds }} - timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} - {{end -}} - readinessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} - periodSeconds: {{ .Values.readiness.periodSeconds }} - env: - - name: PGHOST - value: /tmp - - name: PG_PRIMARY_USER - value: primaryuser - - name: PG_MODE - value: set - - name: PG_PRIMARY_HOST - value: "{{.Values.container.name.primary}}" - - name: PG_REPLICA_HOST - value: "{{.Values.container.name.replica}}" - - name: PG_PRIMARY_PORT - value: "{{.Values.service.internalPort}}" - - name: PG_PRIMARY_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-primary-password - - name: PG_USER - value: "{{.Values.config.pgUserName}}" - - name: PG_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-user-password - - name: PG_DATABASE - value: "{{.Values.config.pgDatabase}}" - - name: PG_ROOT_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-root-password - volumeMounts: - - mountPath: /pgdata - name: {{ include "common.fullname" . }}-data - - mountPath: /backup - name: {{ include "common.fullname" . }}-backup - readOnly: true - resources: -{{ include "common.resources" . | indent 12 }} - {{- if .Values.nodeSelector }} - nodeSelector: -{{ toYaml .Values.nodeSelector | indent 10 }} - {{- end -}} - {{- if .Values.affinity }} - affinity: -{{ toYaml .Values.affinity | indent 10 }} - {{- end }} - volumes: - - name: localtime - hostPath: - path: /etc/localtime - - name: {{ include "common.fullname" . }}-backup - emptyDir: {} -{{- if not .Values.persistence.enabled }} - - name: {{ include "common.fullname" . }}-data - emptyDir: {} -{{- else }} - volumeClaimTemplates: - - metadata: - name: {{ include "common.fullname" . }}-data - labels: - name: {{ include "common.fullname" . }} - chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" - release: "{{ include "common.release" . }}" - heritage: "{{ .Release.Service }}" - spec: - accessModes: - - {{ .Values.persistence.accessMode | quote }} - storageClassName: {{ include "common.storageClass" . }} - resources: - requests: - storage: {{ .Values.persistence.size | quote }} -{{- end }} diff --git a/kubernetes/common/postgres-legacy/values.yaml b/kubernetes/common/postgres-legacy/values.yaml deleted file mode 100644 index 8dd5d0aaac..0000000000 --- a/kubernetes/common/postgres-legacy/values.yaml +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -################################################################# -# Global configuration defaults. -################################################################# -global: - nodePortPrefix: 302 - persistence: {} - readinessRepository: oomk8s - readinessImage: readiness-check:2.0.0 - -################################################################# -# Application configuration defaults. -################################################################# - -# BusyBox image -busyboxRepository: registry.hub.docker.com -busyboxImage: library/busybox:latest - -postgresRepository: crunchydata -image: crunchy-postgres:centos7-10.4-2.0.0 -pullPolicy: Always - -# application configuration -config: - pgUserName: testuser - pgDatabase: userdb - pgPrimaryPassword: password - pgUserPassword: password - pgRootPassword: password - -container: - name: - primary: pgset-primary - replica: pgset-replica - -pgpool: - container: - port: 5432 - name: - primary: pgset-primary - replica: pgset-replica - credentials: - pgusername: testuser - pgpassword: password - service: - name: pgpool - - -# default number of instances -replicaCount: 2 - -nodeSelector: {} - -affinity: {} - -# probe configuration parameters -liveness: - initialDelaySeconds: 300 - periodSeconds: 10 - timeoutSeconds: 5 - # necessary to disable liveness probe when setting breakpoints - # in debugger so K8s doesn't restart unresponsive container - enabled: true - -readiness: - initialDelaySeconds: 10 - periodSeconds: 10 - -## Persist data to a persitent volume -persistence: - enabled: true - - ## A manually managed Persistent Volume and Claim - ## Requires persistence.enabled: true - ## If defined, PVC must be created manually before volume will be bound - # existingClaim: - volumeReclaimPolicy: Retain - - ## database data Persistent Volume Storage Class - ## If defined, storageClassName: <storageClass> - ## If set to "-", storageClassName: "", which disables dynamic provisioning - ## If undefined (the default) or set to null, no storageClassName spec is - ## set, choosing the default provisioner. (gp2 on AWS, standard on - ## GKE, AWS & OpenStack) - accessMode: ReadWriteOnce - size: 1Gi - mountPath: /dockerdata-nfs - mountSubPath: postgres/data - mountInitPath: postgres - -service: - type: ClusterIP - name: pgset - externalPort: 5432 - internalPort: 5432 - type2: ClusterIP - name2: pgset-primary - externalPort2: 5432 - internalPort2: 5432 - type3: ClusterIP - name3: pgset-replica - externalPort3: 5432 - internalPort3: 5432 - -ingress: - enabled: false - -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi - diff --git a/kubernetes/common/postgres/values.yaml b/kubernetes/common/postgres/values.yaml index c2131e9ad0..7aff189ba9 100644 --- a/kubernetes/common/postgres/values.yaml +++ b/kubernetes/common/postgres/values.yaml @@ -48,7 +48,7 @@ busyboxRepository: registry.hub.docker.com busyboxImage: library/busybox:latest postgresRepository: crunchydata -image: crunchy-postgres:centos7-10.4-2.0.0 +image: crunchy-postgres:centos7-10.11-4.2.1 pullPolicy: Always # application configuration |