diff options
Diffstat (limited to 'kubernetes/common/postgres')
15 files changed, 156 insertions, 1285 deletions
diff --git a/kubernetes/common/postgres/charts/pgpool/Chart.yaml b/kubernetes/common/postgres/charts/pgpool/Chart.yaml deleted file mode 100644 index e2818139fa..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/Chart.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -description: ONAP Postgres Server -name: pgpool -version: 5.0.0 diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf b/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf deleted file mode 100644 index f335174f40..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf +++ /dev/null @@ -1,677 +0,0 @@ -# ---------------------------- -# pgPool-II configuration file a custom version -# ---------------------------- -# -# This file consists of lines of the form: -# -# name = value -# -# Whitespace may be used. Comments are introduced with "#" anywhere on a line. -# The complete list of parameter names and allowed values can be found in the -# pgPool-II documentation. -# -# This file is read on server startup and when the server receives a SIGHUP -# signal. If you edit the file on a running system, you have to SIGHUP the -# server for the changes to take effect, or use "pgpool reload". Some -# parameters, which are marked below, require a server shutdown and restart to -# take effect. -# - - -#------------------------------------------------------------------------------ -# CONNECTIONS -#------------------------------------------------------------------------------ - -# - pgpool Connection Settings - - -listen_addresses = '*' - # Host name or IP address to listen on: - # '*' for all, '' for no TCP/IP connections - # (change requires restart) -#port = 9999 -port = 5432 - # Port number - # (change requires restart) -socket_dir = '/tmp' - # Unix domain socket path - # The Debian package defaults to - # /var/run/postgresql - # (change requires restart) - - -# - pgpool Communication Manager Connection Settings - - -pcp_port = 9898 - # Port number for pcp - # (change requires restart) -pcp_socket_dir = '/tmp' - # Unix domain socket path for pcp - # The Debian package defaults to - # /var/run/postgresql - # (change requires restart) - -# - Backend Connection Settings - - -backend_hostname0 = '{{.Values.container.name.primary}}' -backend_port0 = 5432 -backend_weight0= 1 -backend_flag0= 'DISALLOW_TO_FAILOVER' - -backend_hostname1 = '{{.Values.container.name.replica}}' -backend_port1 = 5432 -backend_weight1= 1 -backend_flag1= 'DISALLOW_TO_FAILOVER' - -#backend_hostname0 = 'master' - # Host name or IP address to connect to for backend 0 -#backend_port0 = 5432 - # Port number for backend 0 -#backend_weight0 = 1 - # Weight for backend 0 (only in load balancing mode) -#backend_data_directory0 = '/data' - # Data directory for backend 0 -#backend_flag0 = 'ALLOW_TO_FAILOVER' - # Controls various backend behavior - # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER -#backend_hostname1 = 'standby' -#backend_port1 = 5432 -#backend_weight1 = 1 -#backend_data_directory1 = '/data1' -#backend_flag1 = 'ALLOW_TO_FAILOVER' - -# - Authentication - - -enable_pool_hba = on - # Use pool_hba.conf for client authentication -pool_passwd = 'pool_passwd' - # File name of pool_passwd for md5 authentication. - # "" disables pool_passwd. - # (change requires restart) -authentication_timeout = 60 - # Delay in seconds to complete client authentication - # 0 means no timeout. - -# - SSL Connections - - -ssl = off - # Enable SSL support - # (change requires restart) -#ssl_key = './server.key' - # Path to the SSL private key file - # (change requires restart) -#ssl_cert = './server.cert' - # Path to the SSL public certificate file - # (change requires restart) -#ssl_ca_cert = '' - # Path to a single PEM format file - # containing CA root certificate(s) - # (change requires restart) -#ssl_ca_cert_dir = '' - # Directory containing CA root certificate(s) - # (change requires restart) - - -#------------------------------------------------------------------------------ -# POOLS -#------------------------------------------------------------------------------ - -# - Pool size - - -num_init_children = 5 - # Number of pools - # (change requires restart) -max_pool = 1 - # Number of connections per pool - # (change requires restart) - -# - Life time - - -child_life_time = 300 - # Pool exits after being idle for this many seconds -child_max_connections = 0 - # Pool exits after receiving that many connections - # 0 means no exit -connection_life_time = 0 - # Connection to backend closes after being idle for this many seconds - # 0 means no close -client_idle_limit = 0 - # Client is disconnected after being idle for that many seconds - # (even inside an explicit transactions!) - # 0 means no disconnection - - -#------------------------------------------------------------------------------ -# LOGS -#------------------------------------------------------------------------------ - -# - Where to log - - -log_destination = 'stderr' - # Where to log - # Valid values are combinations of stderr, - # and syslog. Default to stderr. - -# - What to log - - -print_timestamp = on - # Print timestamp on each line - # (change requires restart) - -log_connections = on - # Log connections -log_hostname = on - # Hostname will be shown in ps status - # and in logs if connections are logged -log_statement = on - # Log all statements -log_per_node_statement = off - # Log all statements - # with node and backend informations -log_standby_delay = 'if_over_threshold' - # Log standby delay - # Valid values are combinations of always, - # if_over_threshold, none - -# - Syslog specific - - -syslog_facility = 'LOCAL0' - # Syslog local facility. Default to LOCAL0 -syslog_ident = 'pgpool' - # Syslog program identification string - # Default to 'pgpool' - -# - Debug - - -debug_level = 1 - # Debug message verbosity level - # 0 means no message, 1 or more mean verbose - - -#------------------------------------------------------------------------------ -# FILE LOCATIONS -#------------------------------------------------------------------------------ - -pid_file_name = '/tmp/pgpool.pid' - # PID file name - # (change requires restart) -logdir = '/tmp' - # Directory of pgPool status file - # (change requires restart) - - -#------------------------------------------------------------------------------ -# CONNECTION POOLING -#------------------------------------------------------------------------------ - -connection_cache = off - # Activate connection pools - # (change requires restart) - - # Semicolon separated list of queries - # to be issued at the end of a session - # The default is for 8.3 and later -reset_query_list = 'ABORT; DISCARD ALL' - # The following one is for 8.2 and before -#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT' - - -#------------------------------------------------------------------------------ -# REPLICATION MODE -#------------------------------------------------------------------------------ - -replication_mode = off - # Activate replication mode - # (change requires restart) -replicate_select = off - # Replicate SELECT statements - # when in replication or parallel mode - # replicate_select is higher priority than - # load_balance_mode. - -insert_lock = off - # Automatically locks a dummy row or a table - # with INSERT statements to keep SERIAL data - # consistency - # Without SERIAL, no lock will be issued -lobj_lock_table = '' - # When rewriting lo_creat command in - # replication mode, specify table name to - # lock - -# - Degenerate handling - - -replication_stop_on_mismatch = off - # On disagreement with the packet kind - # sent from backend, degenerate the node - # which is most likely "minority" - # If off, just force to exit this session - -failover_if_affected_tuples_mismatch = off - # On disagreement with the number of affected - # tuples in UPDATE/DELETE queries, then - # degenerate the node which is most likely - # "minority". - # If off, just abort the transaction to - # keep the consistency - - -#------------------------------------------------------------------------------ -# LOAD BALANCING MODE -#------------------------------------------------------------------------------ - -load_balance_mode = on - # Activate load balancing mode - # (change requires restart) -ignore_leading_white_space = on - # Ignore leading white spaces of each query -white_function_list = '' - # Comma separated list of function names - # that don't write to database - # Regexp are accepted -black_function_list = 'currval,lastval,nextval,setval' - # Comma separated list of function names - # that write to database - # Regexp are accepted - - -#------------------------------------------------------------------------------ -# MASTER/SLAVE MODE -#------------------------------------------------------------------------------ - -master_slave_mode = on - # Activate master/slave mode - # (change requires restart) -master_slave_sub_mode = 'stream' - # Master/slave sub mode - # Valid values are combinations slony or - # stream. Default is slony. - # (change requires restart) - -# - Streaming - - -sr_check_period = 10 - # Streaming replication check period - # Disabled (0) by default -sr_check_user = '{{.Values.credentials.pgusername}}' - # Streaming replication check user - # This is neccessary even if you disable streaming - # replication delay check by sr_check_period = 0 -sr_check_password = '{{.Values.credentials.pgpassword}}' - # Password for streaming replication check user -delay_threshold = 10000000 - # Threshold before not dispatching query to standby node - # Unit is in bytes - # Disabled (0) by default - -# - Special commands - - -follow_master_command = '' - # Executes this command after master failover - # Special values: - # %d = node id - # %h = host name - # %p = port number - # %D = database cluster path - # %m = new master node id - # %H = hostname of the new master node - # %M = old master node id - # %P = old primary node id - # %r = new master port number - # %R = new master database cluster path - # %% = '%' character - - -#------------------------------------------------------------------------------ -# PARALLEL MODE -#------------------------------------------------------------------------------ - -parallel_mode = off - # Activates parallel query mode - # (change requires restart) -pgpool2_hostname = '' - # Set pgpool2 hostname - # (change requires restart) - -# - System DB info - - -#system_db_hostname = 'localhost' - # (change requires restart) -#system_db_port = 5432 - # (change requires restart) -#system_db_dbname = 'pgpool' - # (change requires restart) -#system_db_schema = 'pgpool_catalog' - # (change requires restart) -#system_db_user = 'pgpool' - # (change requires restart) -#system_db_password = '' - # (change requires restart) - - -#------------------------------------------------------------------------------ -# HEALTH CHECK -#------------------------------------------------------------------------------ - -health_check_period = 20 - # Health check period - # Disabled (0) by default -health_check_timeout = 10 - # Health check timeout - # 0 means no timeout -health_check_user = '{{.Values.credentials.pgusername}}' - # Health check user -health_check_password = '{{.Values.credentials.pgpassword}}' - # Password for health check user -health_check_max_retries = 3 -connect_timeout = 10000 # Timeout value in milliseconds before giving up to connect to backend. - - # Maximum number of times to retry a failed health check before giving up. -health_check_retry_delay = 1 - # Amount of time to wait (in seconds) between retries. - - -#------------------------------------------------------------------------------ -# FAILOVER AND FAILBACK -#------------------------------------------------------------------------------ - -failover_command = '' - # Executes this command at failover - # Special values: - # %d = node id - # %h = host name - # %p = port number - # %D = database cluster path - # %m = new master node id - # %H = hostname of the new master node - # %M = old master node id - # %P = old primary node id - # %r = new master port number - # %R = new master database cluster path - # %% = '%' character -failback_command = '' - # Executes this command at failback. - # Special values: - # %d = node id - # %h = host name - # %p = port number - # %D = database cluster path - # %m = new master node id - # %H = hostname of the new master node - # %M = old master node id - # %P = old primary node id - # %r = new master port number - # %R = new master database cluster path - # %% = '%' character - -fail_over_on_backend_error = off - # Initiates failover when reading/writing to the - # backend communication socket fails - # If set to off, pgpool will report an - # error and disconnect the session. - -search_primary_node_timeout = 10 - # Timeout in seconds to search for the - # primary node when a failover occurs. - # 0 means no timeout, keep searching - # for a primary node forever. - -#------------------------------------------------------------------------------ -# ONLINE RECOVERY -#------------------------------------------------------------------------------ - -recovery_user = '{{.Values.credentials.pgusername}}' - # Online recovery user -recovery_password = '{{.Values.credentials.pgpassword}}' - # Online recovery password -recovery_1st_stage_command = '' - # Executes a command in first stage -recovery_2nd_stage_command = '' - # Executes a command in second stage -recovery_timeout = 90 - # Timeout in seconds to wait for the - # recovering node's postmaster to start up - # 0 means no wait -client_idle_limit_in_recovery = 0 - # Client is disconnected after being idle - # for that many seconds in the second stage - # of online recovery - # 0 means no disconnection - # -1 means immediate disconnection - - -#------------------------------------------------------------------------------ -# WATCHDOG -#------------------------------------------------------------------------------ - -# - Enabling - - -use_watchdog = off - # Activates watchdog - # (change requires restart) - -# -Connection to up stream servers - - -trusted_servers = '' - # trusted server list which are used - # to confirm network connection - # (hostA,hostB,hostC,...) - # (change requires restart) -ping_path = '/bin' - # ping command path - # (change requires restart) - -# - Watchdog communication Settings - - -wd_hostname = '' - # Host name or IP address of this watchdog - # (change requires restart) -wd_port = 9000 - # port number for watchdog service - # (change requires restart) -wd_authkey = '' - # Authentication key for watchdog communication - # (change requires restart) - -# - Virtual IP control Setting - - -delegate_IP = '' - # delegate IP address - # If this is empty, virtual IP never bring up. - # (change requires restart) -ifconfig_path = '/sbin' - # ifconfig command path - # (change requires restart) -if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0' - # startup delegate IP command - # (change requires restart) -if_down_cmd = 'ifconfig eth0:0 down' - # shutdown delegate IP command - # (change requires restart) - -arping_path = '/usr/sbin' # arping command path - # (change requires restart) - -arping_cmd = 'arping -U $_IP_$ -w 1' - # arping command - # (change requires restart) - -# - Behaivor on escalation Setting - - -clear_memqcache_on_escalation = on - # Clear all the query cache on shared memory - # when standby pgpool escalate to active pgpool - # (= virtual IP holder). - # This should be off if client connects to pgpool - # not using virtual IP. - # (change requires restart) -wd_escalation_command = '' - # Executes this command at escalation on new active pgpool. - # (change requires restart) - -# - Lifecheck Setting - - -# -- common -- - -wd_lifecheck_method = 'heartbeat' - # Method of watchdog lifecheck ('heartbeat' or 'query') - # (change requires restart) -wd_interval = 10 - # lifecheck interval (sec) > 0 - # (change requires restart) - -# -- heartbeat mode -- - -wd_heartbeat_port = 9694 - # Port number for receiving heartbeat signal - # (change requires restart) -wd_heartbeat_keepalive = 2 - # Interval time of sending heartbeat signal (sec) - # (change requires restart) -wd_heartbeat_deadtime = 30 - # Deadtime interval for heartbeat signal (sec) - # (change requires restart) -heartbeat_destination0 = 'host0_ip1' - # Host name or IP address of destination 0 - # for sending heartbeat signal. - # (change requires restart) -heartbeat_destination_port0 = 9694 - # Port number of destination 0 for sending - # heartbeat signal. Usually this is the - # same as wd_heartbeat_port. - # (change requires restart) -heartbeat_device0 = '' - # Name of NIC device (such like 'eth0') - # used for sending/receiving heartbeat - # signal to/from destination 0. - # This works only when this is not empty - # and pgpool has root privilege. - # (change requires restart) - -#heartbeat_destination1 = 'host0_ip2' -#heartbeat_destination_port1 = 9694 -#heartbeat_device1 = '' - -# -- query mode -- - -wd_life_point = 3 - # lifecheck retry times - # (change requires restart) -wd_lifecheck_query = 'SELECT 1' - # lifecheck query to pgpool from watchdog - # (change requires restart) -wd_lifecheck_dbname = 'template1' - # Database name connected for lifecheck - # (change requires restart) -wd_lifecheck_user = 'nobody' - # watchdog user monitoring pgpools in lifecheck - # (change requires restart) -wd_lifecheck_password = '' - # Password for watchdog user in lifecheck - # (change requires restart) - -# - Other pgpool Connection Settings - - -#other_pgpool_hostname0 = 'host0' - # Host name or IP address to connect to for other pgpool 0 - # (change requires restart) -#other_pgpool_port0 = 5432 - # Port number for othet pgpool 0 - # (change requires restart) -#other_wd_port0 = 9000 - # Port number for othet watchdog 0 - # (change requires restart) -#other_pgpool_hostname1 = 'host1' -#other_pgpool_port1 = 5432 -#other_wd_port1 = 9000 - - -#------------------------------------------------------------------------------ -# OTHERS -#------------------------------------------------------------------------------ -relcache_expire = 0 - # Life time of relation cache in seconds. - # 0 means no cache expiration(the default). - # The relation cache is used for cache the - # query result against PostgreSQL system - # catalog to obtain various information - # including table structures or if it's a - # temporary table or not. The cache is - # maintained in a pgpool child local memory - # and being kept as long as it survives. - # If someone modify the table by using - # ALTER TABLE or some such, the relcache is - # not consistent anymore. - # For this purpose, cache_expiration - # controls the life time of the cache. -relcache_size = 256 - # Number of relation cache - # entry. If you see frequently: - # "pool_search_relcache: cache replacement happend" - # in the pgpool log, you might want to increate this number. - -check_temp_table = on - # If on, enable temporary table check in SELECT statements. - # This initiates queries against system catalog of primary/master - # thus increases load of master. - # If you are absolutely sure that your system never uses temporary tables - # and you want to save access to primary/master, you could turn this off. - # Default is on. - - -#------------------------------------------------------------------------------ -# ON MEMORY QUERY MEMORY CACHE -#------------------------------------------------------------------------------ -memory_cache_enabled = off - # If on, use the memory cache functionality, off by default -memqcache_method = 'shmem' - # Cache storage method. either 'shmem'(shared memory) or - # 'memcached'. 'shmem' by default - # (change requires restart) -memqcache_memcached_host = 'localhost' - # Memcached host name or IP address. Mandatory if - # memqcache_method = 'memcached'. - # Defaults to localhost. - # (change requires restart) -memqcache_memcached_port = 11211 - # Memcached port number. Mondatory if memqcache_method = 'memcached'. - # Defaults to 11211. - # (change requires restart) -memqcache_total_size = 67108864 - # Total memory size in bytes for storing memory cache. - # Mandatory if memqcache_method = 'shmem'. - # Defaults to 64MB. - # (change requires restart) -memqcache_max_num_cache = 1000000 - # Total number of cache entries. Mandatory - # if memqcache_method = 'shmem'. - # Each cache entry consumes 48 bytes on shared memory. - # Defaults to 1,000,000(45.8MB). - # (change requires restart) -memqcache_expire = 0 - # Memory cache entry life time specified in seconds. - # 0 means infinite life time. 0 by default. - # (change requires restart) -memqcache_auto_cache_invalidation = on - # If on, invalidation of query cache is triggered by corresponding - # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered - # by memqcache_expire. on by default. - # (change requires restart) -memqcache_maxcache = 409600 - # Maximum SELECT result size in bytes. - # Must be smaller than memqcache_cache_block_size. Defaults to 400KB. - # (change requires restart) -memqcache_cache_block_size = 1048576 - # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'. - # Defaults to 1MB. - # (change requires restart) -memqcache_oiddir = '/var/log/pgpool/oiddir' - # Temporary work directory to record table oids - # (change requires restart) -white_memqcache_table_list = '' - # Comma separated list of table names to memcache - # that don't write to database - # Regexp are accepted -black_memqcache_table_list = '' - # Comma separated list of table names not to memcache - # that don't write to database - # Regexp are accepted diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf b/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf deleted file mode 100644 index 580185c6f0..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf +++ /dev/null @@ -1,68 +0,0 @@ -# pgpool Client Authentication Configuration File a custom version -# =============================================== -# -# The format rule in this file follows the rules in the PostgreSQL -# Administrator's Guide. Refer to chapter "Client Authentication" for a -# complete description. A short synopsis follows. -# -# This file controls: which hosts are allowed to connect, how clients -# are authenticated, which user names they can use, which databases they -# can access. Records take one of these forms: -# -# local DATABASE USER METHOD [OPTION] -# host DATABASE USER CIDR-ADDRESS METHOD [OPTION] -# -# (The uppercase items must be replaced by actual values.) -# -# The first field is the connection type: "local" is a Unix-domain -# socket, "host" is either a plain or SSL-encrypted TCP/IP socket. -# -# DATABASE can be "all", "sameuser", a database name, or a comma-separated -# list thereof. Note that "samegroup" like in PostgreSQL's pg_hba.conf -# file is not supported, since pgpool does not know which group a user -# belongs to. Also note that the database specified here may not exist in -# the backend PostgreSQL. pgpool will authenticate based on the database's -# name, not based on whether it exists or not. -# -# USER can be "all", a user name, or a comma-separated list thereof. In -# both the DATABASE and USER fields you can also write a file name prefixed -# with "@" to include names from a separate file. Note that a group name -# prefixed with "+" like in PostgreSQL's pg_hba.conf file is not supported -# because of the same reason as "samegroup" token. Also note that a user -# name specified here may not exist in the backend PostgreSQL. pgpool will -# authenticate based on the user's name, not based on whether he/she exists. -# -# CIDR-ADDRESS specifies the set of hosts the record matches. -# It is made up of an IP address and a CIDR mask that is an integer -# (between 0 and 32 (IPv4) that specifies the number of significant bits in -# the mask. Alternatively, you can write an IP address and netmask in -# separate columns to specify the set of hosts. -# -# METHOD can be "trust", "reject", "md5" or "pam". Note that "pam" sends passwords -# in clear text. -# -# OPTION is the name of the PAM service. Default service name is "pgpool" -# -# Database and user names containing spaces, commas, quotes and other special -# characters must be quoted. Quoting one of the keywords "all" or "sameuser" -# makes the name lose its special character, and just match a database or -# username with that name. -# -# This file is read on pgpool startup. If you edit the file on a running -# system, you have to restart the pgpool for the changes to take effect. - -# Put your actual configuration here -# ---------------------------------- -# -# If you want to allow non-local connections, you need to add more -# "host" records. In that case you will also need to make pgpool listen -# on a non-local interface via the listen_addresses configuration parameter. -# - -# TYPE DATABASE USER CIDR-ADDRESS METHOD - -# "local" is for Unix domain socket connections only -#local all all trust -# IPv4 local connections: -host all all 0.0.0.0/0 md5 - diff --git a/kubernetes/common/postgres/charts/pgpool/requirements.yaml b/kubernetes/common/postgres/charts/pgpool/requirements.yaml deleted file mode 100644 index 5b097f3ab7..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/requirements.yaml +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -dependencies: - - name: common - version: ~5.x-0 - repository: '@local' diff --git a/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml b/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml deleted file mode 100755 index 099c8dd12e..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml +++ /dev/null @@ -1,26 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -kind: ConfigMap -metadata: - name: {{ include "common.fullname" . }}-pgpool-configmap - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "configs/*").AsConfig . | indent 2 }} diff --git a/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml b/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml deleted file mode 100644 index c24916ad22..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml +++ /dev/null @@ -1,100 +0,0 @@ -{{/* -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# # -# # Licensed under the Apache License, Version 2.0 (the "License"); -# # you may not use this file except in compliance with the License. -# # You may obtain a copy of the License at -# # -# # http://www.apache.org/licenses/LICENSE-2.0 -# # -# # Unless required by applicable law or agreed to in writing, software -# # distributed under the License is distributed on an "AS IS" BASIS, -# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# # See the License for the specific language governing permissions and -# # limitations under the License. -*/}} -kind: Deployment -apiVersion: extensions/v1beta1 -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -spec: - replicas: 2 - template: - metadata: - labels: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} - spec: - initContainers: - - name: {{ include "common.name" . }}-job - image: "{{.Values.repository}}/{{.Values.image}}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - volumeMounts: - - name: pgpool-pgconf - mountPath: /pgconf/pgpoolconfigdir - readOnly: false - - name: pgpool-pgconf-static - mountPath: /configdir/ - readOnly: false - command: - - /bin/sh - args: - - -c - - | - cp /configdir/pgpool.conf /pgconf/pgpoolconfigdir/ - cp /configdir/pool_hba.conf /pgconf/pgpoolconfigdir/ - pg_md5 -f /pgconf/pgpoolconfigdir/pgpool.conf --md5auth --username=${PG_USER} ${PG_PASSWORD} - env: - - name: PG_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: db-user-password - - name: PG_USER - value: {{ index .Values.credentials.pgusername }} - containers: - - image: "{{.Values.repository}}/{{.Values.image}}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - name: {{ include "common.name" . }} - env: - - name: PG_PRIMARY_SERVICE_NAME - value: {{.Values.container.name.primary}} - - name: PG_REPLICA_SERVICE_NAME - value: {{.Values.container.name.replica}} - - name: PG_USERNAME - value: {{.Values.credentials.pgusername}} - - name: PG_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: db-user-password - ports: - - containerPort: 5432 - name: pgpool - protocol: TCP - readinessProbe: - tcpSocket: - port: 5432 - initialDelaySeconds: 20 - periodSeconds: 10 - livenessProbe: - tcpSocket: - port: 5432 - initialDelaySeconds: 15 - periodSeconds: 20 - volumeMounts: - - name: pgpool-pgconf - mountPath: /pgconf/pgpoolconfigdir - readOnly: false - volumes: - - name: pgpool-pgconf - emptyDir: {} - - name: pgpool-pgconf-static - configMap: - name: {{ include "common.fullname" . }}-pgpool-configmap diff --git a/kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml b/kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml deleted file mode 100644 index 3b89371ad4..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml +++ /dev/null @@ -1,28 +0,0 @@ -# Copyright © 2018 Amdocs, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -kind: Secret -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" - release: "{{ include "common.release" . }}" - heritage: "{{ .Release.Service }}" -type: Opaque -data: - db-user-password: {{ default "" .Values.credentials.pgpassword | b64enc | quote }} - diff --git a/kubernetes/common/postgres/charts/pgpool/templates/service.yaml b/kubernetes/common/postgres/charts/pgpool/templates/service.yaml deleted file mode 100644 index 696b22a80d..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/templates/service.yaml +++ /dev/null @@ -1,26 +0,0 @@ -apiVersion: v1 -kind: Service -metadata: - name: {{ .Values.service.name }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - annotations: -spec: - type: {{ .Values.service.type }} - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.portName }} - {{- else -}} - - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.portName }} - {{- end}} - selector: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} diff --git a/kubernetes/common/postgres/charts/pgpool/values.yaml b/kubernetes/common/postgres/charts/pgpool/values.yaml deleted file mode 100644 index 8ceff8f964..0000000000 --- a/kubernetes/common/postgres/charts/pgpool/values.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# Copyright © 2018 Amdocs, AT&T, Bell Canada -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -################################################################# -# Global configuration defaults. -################################################################# -global: - nodePortPrefix: 302 - persistence: {} - readinessRepository: oomk8s - readinessImage: readiness-check:2.0.0 - -################################################################# -# Application configuration defaults. -################################################################# -# application image -repository: crunchydata -image: crunchy-pgpool:centos7-10.4-2.0.0 -pullPolicy: Always - -container: - port: 5432 - name: - primary: pgset-primary - replica: pgset-replica -credentials: - pgusername: testuser - pgpassword: password -service: - name: pgpool - portName: tcp-postgres - type: ClusterIP - externalPort: 5432 - internalPort: 5432 diff --git a/kubernetes/common/postgres/templates/_deployment.tpl b/kubernetes/common/postgres/templates/_deployment.tpl new file mode 100644 index 0000000000..3777c1b2e4 --- /dev/null +++ b/kubernetes/common/postgres/templates/_deployment.tpl @@ -0,0 +1,135 @@ +{{/* +# Copyright © 2018 Amdocs, AT&T, Bell Canada +# Copyright © 2020 Samsung Electronics +# # +# # Licensed under the Apache License, Version 2.0 (the "License"); +# # you may not use this file except in compliance with the License. +# # You may obtain a copy of the License at +# # +# # http://www.apache.org/licenses/LICENSE-2.0 +# # +# # Unless required by applicable law or agreed to in writing, software +# # distributed under the License is distributed on an "AS IS" BASIS, +# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# # See the License for the specific language governing permissions and +# # limitations under the License. +*/}} + +{{- define "common.postgres.deployment" -}} + {{- $dot := .dot }} + {{- $pgMode := .pgMode }} +apiVersion: apps/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" $dot }}-{{ $pgMode }} + namespace: {{ include "common.namespace" $dot }} + labels: + app: {{ include "common.name" $dot }}-{{ $pgMode }} + chart: {{ $dot.Chart.Name }}-{{ $dot.Chart.Version | replace "+" "_" }} + release: {{ include "common.release" $dot }} + heritage: {{ $dot.Release.Service }} + name: "{{ index $dot.Values "container" "name" $pgMode }}" +spec: + serviceName: {{ $dot.Values.service.name }} + replicas: 1 + template: + metadata: + labels: + app: {{ include "common.name" $dot }}-{{ $pgMode }} + release: {{ include "common.release" $dot }} + name: "{{ index $dot.Values "container" "name" $pgMode }}" + spec: + initContainers: + - name: init-sysctl + command: + - /bin/sh + - -c + - | + chown 26:26 /podroot/; + chmod 700 /podroot/; + image: {{ $dot.Values.global.busyboxRepository | default $dot.Values.busyboxRepository }}/{{ $dot.Values.busyboxImage }} + imagePullPolicy: {{ $dot.Values.global.pullPolicy | default $dot.Values.pullPolicy }} + volumeMounts: + - name: {{ include "common.fullname" $dot }}-data + mountPath: /podroot/ + containers: + - name: {{ include "common.name" $dot }} + image: "{{ $dot.Values.postgresRepository }}/{{ $dot.Values.image }}" + imagePullPolicy: {{ $dot.Values.global.pullPolicy | default $dot.Values.pullPolicy }} + ports: + - containerPort: {{ $dot.Values.service.internalPort }} + name: {{ $dot.Values.service.portName }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq $dot.Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ $dot.Values.service.internalPort }} + initialDelaySeconds: {{ $dot.Values.liveness.initialDelaySeconds }} + periodSeconds: {{ $dot.Values.liveness.periodSeconds }} + timeoutSeconds: {{ $dot.Values.liveness.timeoutSeconds }} + {{- end }} + readinessProbe: + tcpSocket: + port: {{ $dot.Values.service.internalPort }} + initialDelaySeconds: {{ $dot.Values.readiness.initialDelaySeconds }} + periodSeconds: {{ $dot.Values.readiness.periodSeconds }} + env: + - name: PGHOST + value: /tmp + - name: PG_PRIMARY_USER + value: primaryuser + - name: PG_MODE + value: {{ $pgMode }} + - name: PG_PRIMARY_HOST + value: "{{ $dot.Values.container.name.primary }}" + - name: PG_REPLICA_HOST + value: "{{ $dot.Values.container.name.replica }}" + - name: PG_PRIMARY_PORT + value: "{{ $dot.Values.service.internalPort }}" + - name: PG_PRIMARY_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" $dot "uid" (include "common.postgres.secret.primaryPasswordUID" .) "key" "password") | indent 10 }} + - name: PG_USER + {{- include "common.secret.envFromSecret" (dict "global" $dot "uid" (include "common.postgres.secret.userCredentialsUID" .) "key" "login") | indent 10 }} + - name: PG_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" $dot "uid" (include "common.postgres.secret.userCredentialsUID" .) "key" "password") | indent 10 }} + - name: PG_DATABASE + value: "{{ $dot.Values.config.pgDatabase }}" + - name: PG_ROOT_PASSWORD + {{- include "common.secret.envFromSecret" (dict "global" $dot "uid" (include "common.postgres.secret.rootPassUID" .) "key" "password") | indent 10 }} + volumeMounts: + - name: pool-hba-conf + mountPath: /pgconf/pool_hba.conf + subPath: pool_hba.conf + - mountPath: /pgdata + name: {{ include "common.fullname" $dot }}-data + - mountPath: /backup + name: {{ include "common.fullname" $dot }}-backup + readOnly: true + resources: +{{ include "common.resources" $dot | indent 12 }} + {{- if $dot.Values.nodeSelector }} + nodeSelector: +{{ toYaml $dot.Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if $dot.Values.affinity }} + affinity: +{{ toYaml $dot.Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" $dot }}-backup + emptyDir: {} + - name: {{ include "common.fullname" $dot }}-data +{{- if $dot.Values.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ include "common.fullname" $dot }}-{{ $pgMode }} +{{- else }} + emptyDir: {} +{{ end }} + - name: pool-hba-conf + configMap: + name: {{ include "common.fullname" $dot }} +{{- end -}}
\ No newline at end of file diff --git a/kubernetes/common/postgres/templates/deployment-primary.yaml b/kubernetes/common/postgres/templates/deployment-primary.yaml index b234dc2092..c8a000142e 100644 --- a/kubernetes/common/postgres/templates/deployment-primary.yaml +++ b/kubernetes/common/postgres/templates/deployment-primary.yaml @@ -13,126 +13,4 @@ # # See the License for the specific language governing permissions and # # limitations under the License. */}} -apiVersion: apps/v1beta1 -kind: Deployment -metadata: - name: {{ include "common.fullname" . }}-primary - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }}-primary - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - name: "{{ .Values.container.name.primary }}" -spec: - serviceName: {{ .Values.service.name }} - replicas: 1 - template: - metadata: - labels: - app: {{ include "common.name" . }}-primary - release: {{ include "common.release" . }} - name: "{{ .Values.container.name.primary }}" - spec: - initContainers: - - name: init-sysctl - command: - - /bin/sh - - -c - - | - chown 26:26 /podroot/; - chmod 700 /podroot/; - image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }} - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - volumeMounts: - - name: {{ include "common.fullname" . }}-data - mountPath: /podroot/ - containers: - - name: {{ include "common.name" . }} - image: "{{ .Values.postgresRepository }}/{{ .Values.image }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - ports: - - containerPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.portName }} - # disable liveness probe when breakpoints set in debugger - # so K8s doesn't restart unresponsive container - {{- if eq .Values.liveness.enabled true }} - livenessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} - periodSeconds: {{ .Values.liveness.periodSeconds }} - timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} - {{- end }} - readinessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} - periodSeconds: {{ .Values.readiness.periodSeconds }} - env: - - name: PGHOST - value: /tmp - - name: PG_PRIMARY_USER - value: primaryuser - - name: PG_MODE - value: primary - - name: PG_PRIMARY_HOST - value: "{{ .Values.container.name.primary }}" - - name: PG_REPLICA_HOST - value: "{{ .Values.container.name.replica }}" - - name: PG_PRIMARY_PORT - value: "{{ .Values.service.internalPort }}" - - name: PG_PRIMARY_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-primary-password - - name: PG_USER - value: "{{ .Values.config.pgUserName }}" - - name: PG_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-user-password - - name: PG_DATABASE - value: "{{ .Values.config.pgDatabase }}" - - name: PG_ROOT_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-root-password - volumeMounts: - - name: pool-hba-conf - mountPath: /pgconf/pool_hba.conf - subPath: pool_hba.conf - - mountPath: /pgdata - name: {{ include "common.fullname" . }}-data - - mountPath: /backup - name: {{ include "common.fullname" . }}-backup - readOnly: true - resources: -{{ include "common.resources" . | indent 12 }} - {{- if .Values.nodeSelector }} - nodeSelector: -{{ toYaml .Values.nodeSelector | indent 10 }} - {{- end -}} - {{- if .Values.affinity }} - affinity: -{{ toYaml .Values.affinity | indent 10 }} - {{- end }} - volumes: - - name: localtime - hostPath: - path: /etc/localtime - - name: {{ include "common.fullname" . }}-backup - emptyDir: {} - - name: {{ include "common.fullname" . }}-data -{{- if .Values.persistence.enabled }} - persistentVolumeClaim: - claimName: {{ include "common.fullname" . }}-primary -{{- else }} - emptyDir: {} -{{ end }} - - name: pool-hba-conf - configMap: - name: {{ include "common.fullname" . }} +{{ include "common.postgres.deployment" (dict "dot" . "pgMode" "primary") }} diff --git a/kubernetes/common/postgres/templates/deployment-replica.yaml b/kubernetes/common/postgres/templates/deployment-replica.yaml index 72a8736e17..dc19c2d985 100644 --- a/kubernetes/common/postgres/templates/deployment-replica.yaml +++ b/kubernetes/common/postgres/templates/deployment-replica.yaml @@ -13,126 +13,4 @@ # # See the License for the specific language governing permissions and # # limitations under the License. */}} -apiVersion: apps/v1beta1 -kind: Deployment -metadata: - name: {{ include "common.fullname" . }}-replica - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }}-replica - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} - name: "{{ .Values.container.name.replica }}" -spec: - serviceName: {{ .Values.service.name }} - replicas: 1 - template: - metadata: - labels: - app: {{ include "common.name" . }}-replica - release: {{ include "common.release" . }} - name: "{{ .Values.container.name.replica }}" - spec: - initContainers: - - name: init-sysctl - command: - - /bin/sh - - -c - - | - chown 26:26 /podroot/; - chmod 700 /podroot/; - image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }} - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - volumeMounts: - - name: {{ include "common.fullname" . }}-data - mountPath: /podroot/ - containers: - - name: {{ include "common.name" . }} - image: "{{ .Values.postgresRepository }}/{{ .Values.image }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - ports: - - containerPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.portName }} - # disable liveness probe when breakpoints set in debugger - # so K8s doesn't restart unresponsive container - {{- if eq .Values.liveness.enabled true }} - livenessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} - periodSeconds: {{ .Values.liveness.periodSeconds }} - timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} - {{end -}} - readinessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} - periodSeconds: {{ .Values.readiness.periodSeconds }} - env: - - name: PGHOST - value: /tmp - - name: PG_PRIMARY_USER - value: primaryuser - - name: PG_MODE - value: replica - - name: PG_PRIMARY_HOST - value: "{{.Values.container.name.primary}}" - - name: PG_REPLICA_HOST - value: "{{.Values.container.name.replica}}" - - name: PG_PRIMARY_PORT - value: "{{.Values.service.internalPort}}" - - name: PG_PRIMARY_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-primary-password - - name: PG_USER - value: "{{.Values.config.pgUserName}}" - - name: PG_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-user-password - - name: PG_DATABASE - value: "{{.Values.config.pgDatabase}}" - - name: PG_ROOT_PASSWORD - valueFrom: - secretKeyRef: - name: {{ template "common.fullname" . }} - key: pg-root-password - volumeMounts: - - name: pool-hba-conf - mountPath: /pgconf/pool_hba.conf - subPath: pool_hba.conf - - mountPath: /pgdata - name: {{ include "common.fullname" . }}-data - - mountPath: /backup - name: {{ include "common.fullname" . }}-backup - readOnly: true - resources: -{{ include "common.resources" . | indent 12 }} - {{- if .Values.nodeSelector }} - nodeSelector: -{{ toYaml .Values.nodeSelector | indent 10 }} - {{- end -}} - {{- if .Values.affinity }} - affinity: -{{ toYaml .Values.affinity | indent 10 }} - {{- end }} - volumes: - - name: localtime - hostPath: - path: /etc/localtime - - name: {{ include "common.fullname" . }}-backup - emptyDir: {} - - name: {{ include "common.fullname" . }}-data -{{- if .Values.persistence.enabled }} - persistentVolumeClaim: - claimName: {{ include "common.fullname" . }}-replica -{{- else }} - emptyDir: {} -{{ end }} - - name: pool-hba-conf - configMap: - name: {{ include "common.fullname" . }} +{{ include "common.postgres.deployment" (dict "dot" . "pgMode" "replica") }} diff --git a/kubernetes/common/postgres/templates/pvc-primary.yaml b/kubernetes/common/postgres/templates/pvc-primary.yaml index fa25f19077..a47d3ed56e 100644 --- a/kubernetes/common/postgres/templates/pvc-primary.yaml +++ b/kubernetes/common/postgres/templates/pvc-primary.yaml @@ -41,5 +41,4 @@ spec: {{- else }} storageClassName: {{ include "common.storageClass" . }} {{- end }} - storageClassName: "{{ include "common.fullname" . }}-primary" {{- end -}} diff --git a/kubernetes/common/postgres/templates/secrets.yaml b/kubernetes/common/postgres/templates/secrets.yaml index db1bc5bb15..4c68015528 100644 --- a/kubernetes/common/postgres/templates/secrets.yaml +++ b/kubernetes/common/postgres/templates/secrets.yaml @@ -13,19 +13,4 @@ # # See the License for the specific language governing permissions and # # limitations under the License. */}} -apiVersion: v1 -kind: Secret -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.fullname" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -type: Opaque -data: - pg-primary-password: {{ .Values.config.pgPrimaryPassword | b64enc | quote }} - pg-user-password: {{ .Values.config.pgUserPassword | b64enc | quote }} - pg-root-password: {{ .Values.config.pgRootPassword | b64enc | quote }} - +{{ include "common.secret" . }} diff --git a/kubernetes/common/postgres/values.yaml b/kubernetes/common/postgres/values.yaml index 3104ee79d2..c2131e9ad0 100644 --- a/kubernetes/common/postgres/values.yaml +++ b/kubernetes/common/postgres/values.yaml @@ -22,6 +22,24 @@ global: readinessImage: readiness-check:2.0.0 ################################################################# +# Secrets metaconfig +################################################################# +secrets: + - uid: '{{ include "common.postgres.secret.rootPassUID" . }}' + type: password + externalSecret: '{{ tpl (default "" .Values.config.pgRootPasswordExternalSecret) . }}' + password: '{{ .Values.config.pgRootPassword }}' + - uid: '{{ include "common.postgres.secret.userCredentialsUID" . }}' + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.config.pgUserExternalSecret) . }}' + login: '{{ .Values.config.pgUserName }}' + password: '{{ .Values.config.pgUserPassword }}' + - uid: '{{ include "common.postgres.secret.primaryPasswordUID" . }}' + type: password + externalSecret: '{{ tpl (default "" .Values.config.pgPrimaryPasswordExternalSecret) . }}' + password: '{{ .Values.config.pgPrimaryPassword }}' + +################################################################# # Application configuration defaults. ################################################################# @@ -46,22 +64,6 @@ container: primary: pgset-primary replica: pgset-replica -pgpool: - container: - port: 5432 - name: - primary: pgset-primary - replica: pgset-replica - credentials: - pgusername: testuser - pgpassword: password - service: - name: pgpool - - -# default number of instances -replicaCount: 2 - nodeSelector: {} affinity: {} |