diff options
Diffstat (limited to 'kubernetes/clamp/resources')
4 files changed, 23 insertions, 387 deletions
diff --git a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml deleted file mode 100644 index dab2e44f5e..0000000000 --- a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml +++ /dev/null @@ -1,53 +0,0 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -filebeat.prospectors: -#it is mandatory, in our case it's log -- input_type: log - #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. - paths: - - /var/log/onap/*/*/*/*.log - - /var/log/onap/*/*/*.log - - /var/log/onap/*/*.log - #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive - ignore_older: 48h - # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit - clean_inactive: 96h - -# Name of the registry file. If a relative path is used, it is considered relative to the -# data path. Else full qualified file name. -#filebeat.registry_file: ${path.data}/registry - - -output.logstash: - #List of logstash server ip addresses with port number. - #But, in our case, this will be the loadbalancer IP address. - #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. - hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"] - #If enable will do load balancing among availabe Logstash, automatically. - loadbalance: true - - #The list of root certificates for server verifications. - #If certificate_authorities is empty or not set, the trusted - #certificate authorities of the host system are used. - #ssl.certificate_authorities: $ssl.certificate_authorities - - #The path to the certificate for SSL client authentication. If the certificate is not specified, - #client authentication is not available. - #ssl.certificate: $ssl.certificate - - #The client certificate key used for client authentication. - #ssl.key: $ssl.key - - #The passphrase used to decrypt an encrypted key stored in the configured key file - #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/clamp/resources/config/logback.xml b/kubernetes/clamp/resources/config/logback.xml deleted file mode 100644 index 551ed34ee4..0000000000 --- a/kubernetes/clamp/resources/config/logback.xml +++ /dev/null @@ -1,316 +0,0 @@ -<?xml version = "1.0" encoding = "UTF-8" ?> -<!-- -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. ---> -<included> - <jmxConfigurator /> - <!-- Example evaluator filter applied against console appender --> - <property - name="p_tim" - value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}" /> - <property - name="p_lvl" - value="%level" /> - <property - name="p_log" - value="%logger" /> - <property - name="p_mdc" - value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" /> - <property - name="p_msg" - value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" /> - <property - name="p_exc" - value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" /> - <property - name="p_mak" - value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" /> - <property - name="p_thr" - value="%thread" /> - <property - name="defaultPattern" - value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" /> - <property - name="debugPattern" - value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" /> - - <!-- Example evaluator filter applied against console appender --> - <appender - name="STDOUT" - class="ch.qos.logback.core.ConsoleAppender"> - <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> - <level>INFO</level> - </filter> - <encoder> - <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n - </pattern> - </encoder> - </appender> - - <appender - name="ERROR" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> - <level>INFO</level> - </filter> - <file>${logDirectory}/error.log</file> - <append>true</append> - <encoder> - <pattern>${defaultPattern}</pattern> - </encoder> - <rollingPolicy - class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy"> - <fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip - </fileNamePattern> - <maxFileSize>50MB</maxFileSize> - <maxHistory>30</maxHistory> - <totalSizeCap>10GB</totalSizeCap> - </rollingPolicy> - <triggeringPolicy - class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> - <maxFileSize>10MB</maxFileSize> - </triggeringPolicy> - </appender> - - <appender - name="DEBUG" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <file>${logDirectory}/debug.log</file> - <append>true</append> - <encoder> - <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n - </pattern> - </encoder> - <rollingPolicy - class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy"> - <fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip - </fileNamePattern> - <maxFileSize>50MB</maxFileSize> - <maxHistory>30</maxHistory> - <totalSizeCap>10GB</totalSizeCap> - </rollingPolicy> - </appender> - - - <appender - name="AUDIT" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <file>${logDirectory}/audit.log</file> - <append>true</append> - <encoder> - <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n - </pattern> - </encoder> - <rollingPolicy - class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> - <maxIndex>10</maxIndex> - <FileNamePattern>${logDirectory}/audit.%i.log.zip - </FileNamePattern> - </rollingPolicy> - <triggeringPolicy - class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> - <maxFileSize>10MB</maxFileSize> - </triggeringPolicy> - </appender> - <appender - name="asyncEELFAudit" - class="ch.qos.logback.classic.AsyncAppender"> - <queueSize>256</queueSize> - <appender-ref ref="AUDIT" /> - </appender> - - <appender - name="METRIC" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <file>${logDirectory}/metric.log</file> - <append>true</append> - <encoder> - <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| - %msg%n</pattern> - </encoder> - <rollingPolicy - class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> - <maxIndex>10</maxIndex> - <FileNamePattern>${logDirectory}/metric.%i.log.zip - </FileNamePattern> - </rollingPolicy> - <triggeringPolicy - class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> - <maxFileSize>10MB</maxFileSize> - </triggeringPolicy> - </appender> - <appender - name="asyncEELFMetrics" - class="ch.qos.logback.classic.AsyncAppender"> - <queueSize>256</queueSize> - <appender-ref ref="METRIC" /> - </appender> - - <!-- SECURITY related loggers --> - <appender - name="SECURITY" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <file>${logDirectory}/security.log</file> - <append>true</append> - <encoder> - <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n - </pattern> - </encoder> - <rollingPolicy - class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> - <maxIndex>10</maxIndex> - <FileNamePattern>${logDirectory}/security.%i.log.zip - </FileNamePattern> - </rollingPolicy> - <triggeringPolicy - class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> - <maxFileSize>10MB</maxFileSize> - </triggeringPolicy> - </appender> - <appender - name="asyncEELFSecurity" - class="ch.qos.logback.classic.AsyncAppender"> - <queueSize>256</queueSize> - <appender-ref ref="SECURITY" /> - </appender> - <!-- logback jms appenders & loggers definition starts here --> - <appender - name="auditLogs" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> - </filter> - <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file> - <rollingPolicy - class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> - <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip - </fileNamePattern> - <minIndex>1</minIndex> - <maxIndex>9</maxIndex> - </rollingPolicy> - <triggeringPolicy - class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> - <maxFileSize>5MB</maxFileSize> - </triggeringPolicy> - <encoder> - <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern> - </encoder> - </appender> - <appender - name="perfLogs" - class="ch.qos.logback.core.rolling.RollingFileAppender"> - <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> - </filter> - <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file> - <rollingPolicy - class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> - <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip - </fileNamePattern> - <minIndex>1</minIndex> - <maxIndex>9</maxIndex> - </rollingPolicy> - <triggeringPolicy - class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> - <maxFileSize>5MB</maxFileSize> - </triggeringPolicy> - <encoder> - <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern> - </encoder> - </appender> - - <logger - name="org.onap.aaf" - level="DEBUG"> - <appender-ref ref="DEBUG" /> - </logger> - <logger - name="org.apache" - level="DEBUG"> - <appender-ref ref="DEBUG" /> - </logger> - <!-- Spring related loggers --> - <logger - name="org.springframework" - level="DEBUG"> - <appender-ref ref="DEBUG" /> - </logger> - - <!-- CLDS related loggers --> - <logger - name="org.onap.clamp" - level="DEBUG"> - <appender-ref ref="ERROR" /> - <appender-ref ref="DEBUG" /> - </logger> - - <!-- CLDS related loggers --> - <logger - name="com.att.eelf.error" - level="OFF"> - <appender-ref ref="ERROR" /> - </logger> - <!-- EELF related loggers --> - <logger - name="com.att.eelf.audit" - level="INFO" - additivity="false"> - <appender-ref ref="asyncEELFAudit" /> - </logger> - <logger - name="com.att.eelf.metrics" - level="DEBUG" - additivity="false"> - <appender-ref ref="asyncEELFMetrics" /> - </logger> - <logger - name="com.att.eelf.security" - level="DEBUG" - additivity="false"> - <appender-ref ref="asyncEELFSecurity" /> - </logger> - - <!-- logback internals logging --> - <logger - name="ch.qos.logback.classic" - level="INFO" /> - <logger - name="ch.qos.logback.core" - level="INFO" /> - <logger - name="AuditRecord" - level="INFO" - additivity="false"> - <appender-ref ref="auditLogs" /> - </logger> - <logger - name="AuditRecord_DirectCall" - level="INFO" - additivity="false"> - <appender-ref ref="auditLogs" /> - </logger> - <logger - name="PerfTrackerRecord" - level="INFO" - additivity="false"> - <appender-ref ref="perfLogs" /> - </logger> - <!-- logback jms appenders & loggers definition ends here --> - - <root level="DEBUG"> - <appender-ref ref="DEBUG" /> - <appender-ref ref="STDOUT" /> - </root> -</included> diff --git a/kubernetes/clamp/resources/config/nginx.conf b/kubernetes/clamp/resources/config/nginx.conf new file mode 100644 index 0000000000..ce94eff70f --- /dev/null +++ b/kubernetes/clamp/resources/config/nginx.conf @@ -0,0 +1,23 @@ +server { + + listen 443 default ssl; + ssl_protocols TLSv1.2; + ssl_certificate /etc/ssl/clamp.pem; + ssl_certificate_key /etc/ssl/clamp.key; + location /restservices/clds/ { + proxy_pass https://clamp-backend:443; + } + + location / { + root /usr/share/nginx/html; + index index.html index.htm; + try_files $uri $uri/ /index.html; + } + + error_page 500 502 503 504 /50x.html; + + location = /50x.html { + root /usr/share/nginx/html; + } + +} diff --git a/kubernetes/clamp/resources/config/sdc-controllers-config.json b/kubernetes/clamp/resources/config/sdc-controllers-config.json deleted file mode 100644 index 3adda95c11..0000000000 --- a/kubernetes/clamp/resources/config/sdc-controllers-config.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "sdc-connections":{ - "sdc-controller":{ - "user": "clamp", - "consumerGroup": "clamp", - "consumerId": "clamp", - "environmentName": "AUTO", - "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443", - "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981", - "pollingInterval":30, - "pollingTimeout":30, - "activateServerTLSAuth":"false", - "keyStorePassword":"", - "keyStorePath":"", - "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"] - } - } -} |