summaryrefslogtreecommitdiffstats
path: root/kubernetes/clamp/resources
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/clamp/resources')
-rw-r--r--kubernetes/clamp/resources/config/log/filebeat/filebeat.yml53
-rw-r--r--kubernetes/clamp/resources/config/logback.xml316
-rw-r--r--kubernetes/clamp/resources/config/nginx.conf23
-rw-r--r--kubernetes/clamp/resources/config/sdc-controllers-config.json18
4 files changed, 23 insertions, 387 deletions
diff --git a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml
deleted file mode 100644
index dab2e44f5e..0000000000
--- a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml
+++ /dev/null
@@ -1,53 +0,0 @@
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/clamp/resources/config/logback.xml b/kubernetes/clamp/resources/config/logback.xml
deleted file mode 100644
index 551ed34ee4..0000000000
--- a/kubernetes/clamp/resources/config/logback.xml
+++ /dev/null
@@ -1,316 +0,0 @@
-<?xml version = "1.0" encoding = "UTF-8" ?>
-<!--
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--->
-<included>
- <jmxConfigurator />
- <!-- Example evaluator filter applied against console appender -->
- <property
- name="p_tim"
- value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}" />
- <property
- name="p_lvl"
- value="%level" />
- <property
- name="p_log"
- value="%logger" />
- <property
- name="p_mdc"
- value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" />
- <property
- name="p_msg"
- value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" />
- <property
- name="p_exc"
- value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" />
- <property
- name="p_mak"
- value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" />
- <property
- name="p_thr"
- value="%thread" />
- <property
- name="defaultPattern"
- value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
- <property
- name="debugPattern"
- value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" />
-
- <!-- Example evaluator filter applied against console appender -->
- <appender
- name="STDOUT"
- class="ch.qos.logback.core.ConsoleAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <encoder>
- <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
- </pattern>
- </encoder>
- </appender>
-
- <appender
- name="ERROR"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <file>${logDirectory}/error.log</file>
- <append>true</append>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
- <fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip
- </fileNamePattern>
- <maxFileSize>50MB</maxFileSize>
- <maxHistory>30</maxHistory>
- <totalSizeCap>10GB</totalSizeCap>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
-
- <appender
- name="DEBUG"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/debug.log</file>
- <append>true</append>
- <encoder>
- <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
- </pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
- <fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip
- </fileNamePattern>
- <maxFileSize>50MB</maxFileSize>
- <maxHistory>30</maxHistory>
- <totalSizeCap>10GB</totalSizeCap>
- </rollingPolicy>
- </appender>
-
-
- <appender
- name="AUDIT"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/audit.log</file>
- <append>true</append>
- <encoder>
- <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
- </pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <maxIndex>10</maxIndex>
- <FileNamePattern>${logDirectory}/audit.%i.log.zip
- </FileNamePattern>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
- <appender
- name="asyncEELFAudit"
- class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="AUDIT" />
- </appender>
-
- <appender
- name="METRIC"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/metric.log</file>
- <append>true</append>
- <encoder>
- <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
- %msg%n</pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <maxIndex>10</maxIndex>
- <FileNamePattern>${logDirectory}/metric.%i.log.zip
- </FileNamePattern>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
- <appender
- name="asyncEELFMetrics"
- class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="METRIC" />
- </appender>
-
- <!-- SECURITY related loggers -->
- <appender
- name="SECURITY"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/security.log</file>
- <append>true</append>
- <encoder>
- <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
- </pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <maxIndex>10</maxIndex>
- <FileNamePattern>${logDirectory}/security.%i.log.zip
- </FileNamePattern>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
- <appender
- name="asyncEELFSecurity"
- class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="SECURITY" />
- </appender>
- <!-- logback jms appenders & loggers definition starts here -->
- <appender
- name="auditLogs"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- </filter>
- <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
- </encoder>
- </appender>
- <appender
- name="perfLogs"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- </filter>
- <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
- </encoder>
- </appender>
-
- <logger
- name="org.onap.aaf"
- level="DEBUG">
- <appender-ref ref="DEBUG" />
- </logger>
- <logger
- name="org.apache"
- level="DEBUG">
- <appender-ref ref="DEBUG" />
- </logger>
- <!-- Spring related loggers -->
- <logger
- name="org.springframework"
- level="DEBUG">
- <appender-ref ref="DEBUG" />
- </logger>
-
- <!-- CLDS related loggers -->
- <logger
- name="org.onap.clamp"
- level="DEBUG">
- <appender-ref ref="ERROR" />
- <appender-ref ref="DEBUG" />
- </logger>
-
- <!-- CLDS related loggers -->
- <logger
- name="com.att.eelf.error"
- level="OFF">
- <appender-ref ref="ERROR" />
- </logger>
- <!-- EELF related loggers -->
- <logger
- name="com.att.eelf.audit"
- level="INFO"
- additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger
- name="com.att.eelf.metrics"
- level="DEBUG"
- additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger
- name="com.att.eelf.security"
- level="DEBUG"
- additivity="false">
- <appender-ref ref="asyncEELFSecurity" />
- </logger>
-
- <!-- logback internals logging -->
- <logger
- name="ch.qos.logback.classic"
- level="INFO" />
- <logger
- name="ch.qos.logback.core"
- level="INFO" />
- <logger
- name="AuditRecord"
- level="INFO"
- additivity="false">
- <appender-ref ref="auditLogs" />
- </logger>
- <logger
- name="AuditRecord_DirectCall"
- level="INFO"
- additivity="false">
- <appender-ref ref="auditLogs" />
- </logger>
- <logger
- name="PerfTrackerRecord"
- level="INFO"
- additivity="false">
- <appender-ref ref="perfLogs" />
- </logger>
- <!-- logback jms appenders & loggers definition ends here -->
-
- <root level="DEBUG">
- <appender-ref ref="DEBUG" />
- <appender-ref ref="STDOUT" />
- </root>
-</included>
diff --git a/kubernetes/clamp/resources/config/nginx.conf b/kubernetes/clamp/resources/config/nginx.conf
new file mode 100644
index 0000000000..ce94eff70f
--- /dev/null
+++ b/kubernetes/clamp/resources/config/nginx.conf
@@ -0,0 +1,23 @@
+server {
+
+ listen 443 default ssl;
+ ssl_protocols TLSv1.2;
+ ssl_certificate /etc/ssl/clamp.pem;
+ ssl_certificate_key /etc/ssl/clamp.key;
+ location /restservices/clds/ {
+ proxy_pass https://clamp-backend:443;
+ }
+
+ location / {
+ root /usr/share/nginx/html;
+ index index.html index.htm;
+ try_files $uri $uri/ /index.html;
+ }
+
+ error_page 500 502 503 504 /50x.html;
+
+ location = /50x.html {
+ root /usr/share/nginx/html;
+ }
+
+}
diff --git a/kubernetes/clamp/resources/config/sdc-controllers-config.json b/kubernetes/clamp/resources/config/sdc-controllers-config.json
deleted file mode 100644
index 3adda95c11..0000000000
--- a/kubernetes/clamp/resources/config/sdc-controllers-config.json
+++ /dev/null
@@ -1,18 +0,0 @@
-{
- "sdc-connections":{
- "sdc-controller":{
- "user": "clamp",
- "consumerGroup": "clamp",
- "consumerId": "clamp",
- "environmentName": "AUTO",
- "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443",
- "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
- "pollingInterval":30,
- "pollingTimeout":30,
- "activateServerTLSAuth":"false",
- "keyStorePassword":"",
- "keyStorePath":"",
- "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"]
- }
- }
-}