diff options
Diffstat (limited to 'kubernetes/clamp/components')
51 files changed, 3647 insertions, 0 deletions
diff --git a/kubernetes/clamp/components/Makefile b/kubernetes/clamp/components/Makefile new file mode 100644 index 0000000000..bf267b7720 --- /dev/null +++ b/kubernetes/clamp/components/Makefile @@ -0,0 +1,51 @@ +# Copyright © 2020 Samsung Electronics +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST)))) +OUTPUT_DIR := $(ROOT_DIR)/../../dist +PACKAGE_DIR := $(OUTPUT_DIR)/packages +SECRET_DIR := $(OUTPUT_DIR)/secrets + +EXCLUDES := +HELM_BIN := helm +HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.)))) + +.PHONY: $(EXCLUDES) $(HELM_CHARTS) + +all: $(HELM_CHARTS) + +$(HELM_CHARTS): + @echo "\n[$@]" + @make package-$@ + +make-%: + @if [ -f $*/Makefile ]; then make -C $*; fi + +dep-%: make-% + @if [ -f $*/requirements.yaml ]; then $(HELM_BIN) dep up $*; fi + +lint-%: dep-% + @if [ -f $*/Chart.yaml ]; then $(HELM_BIN) lint $*; fi + +package-%: lint-% + @mkdir -p $(PACKAGE_DIR) + @if [ -f $*/Chart.yaml ]; then $(HELM_BIN) package -d $(PACKAGE_DIR) $*; fi + @$(HELM_BIN) repo index $(PACKAGE_DIR) + +clean: + @rm -f */requirements.lock + @rm -f *tgz */charts/*tgz + @rm -rf $(PACKAGE_DIR) +%: + @: diff --git a/kubernetes/clamp/components/clamp-backend/Chart.yaml b/kubernetes/clamp/components/clamp-backend/Chart.yaml new file mode 100644 index 0000000000..89117ce205 --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Clamp +name: clamp-backend +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-backend/requirements.yaml b/kubernetes/clamp/components/clamp-backend/requirements.yaml new file mode 100644 index 0000000000..5b041a56f2 --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/requirements.yaml @@ -0,0 +1,22 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: certInitializer + version: ~6.x-0 + repository: '@local' + - name: repositoryGenerator + version: ~6.x-0 + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/application.properties b/kubernetes/clamp/components/clamp-backend/resources/config/application.properties new file mode 100644 index 0000000000..8dd0fc796a --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/resources/config/application.properties @@ -0,0 +1,71 @@ +{{/* +### +# ============LICENSE_START======================================================= +# ONAP CLAMP +# ================================================================================ +# Copyright (C) 2017-2019 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Modifications copyright (c) 2019 Nokia +# ================================================================================\ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END============================================ +# =================================================================== +# +### +*/}} +{{- if .Values.global.aafEnabled }} +server.ssl.key-store=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keystoreFile }} +server.ssl.key-store-password=${cadi_keystore_password_p12} +server.ssl.key-password=${cadi_key_password} +server.ssl.key-store-type=PKCS12 +server.ssl.key-alias={{ .Values.certInitializer.fqi }} + +# The key file used to decode the key store and trust store password +# If not defined, the key store and trust store password will not be decrypted +clamp.config.keyFile=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.keyFile }} + +## Config part for Client certificates +server.ssl.client-auth=want +server.ssl.trust-store=file:{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.truststoreFile }} +server.ssl.trust-store-password=${cadi_truststore_password} +{{- end }} + +#clds datasource connection details +spring.datasource.username=${MYSQL_USER} +spring.datasource.password=${MYSQL_PASSWORD} +spring.datasource.url=jdbc:mariadb:sequential://clampdb.{{ include "common.namespace" . }}:3306/${MYSQL_DATABASE}?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3 +spring.profiles.active=clamp-default,clamp-aaf-authentication,clamp-sdc-controller,clamp-ssl-config,clamp-policy-controller,default-dictionary-elements + +#The log folder that will be used in logback.xml file +clamp.config.files.sdcController=file:/opt/clamp/sdc-controllers-config.json + +# +# Configuration Settings for Policy Engine Components +clamp.config.policy.api.url=https4://policy-api.{{ include "common.namespace" . }}:6969 +clamp.config.policy.api.userName=healthcheck +clamp.config.policy.api.password=zb!XztG34 +clamp.config.policy.pap.url=https4://policy-pap.{{ include "common.namespace" . }}:6969 +clamp.config.policy.pap.userName=healthcheck +clamp.config.policy.pap.password=zb!XztG34 + +#DCAE Inventory Url Properties +clamp.config.dcae.inventory.url=https4://inventory.{{ include "common.namespace" . }}:8080 +clamp.config.dcae.dispatcher.url=https4://deployment-handler.{{ include "common.namespace" . }}:8443 +#DCAE Deployment Url Properties +clamp.config.dcae.deployment.url=https4://deployment-handler.{{ include "common.namespace" . }}:8443 +clamp.config.dcae.deployment.userName=none +clamp.config.dcae.deployment.password=none + +#AAF related parameters +clamp.config.cadi.aafLocateUrl=https://aaf-locate.{{ include "common.namespace" . }}:8095 diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml new file mode 100644 index 0000000000..8717e6f33a --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml @@ -0,0 +1,55 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/sdc-controllers-config.json b/kubernetes/clamp/components/clamp-backend/resources/config/sdc-controllers-config.json new file mode 100644 index 0000000000..3adda95c11 --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/resources/config/sdc-controllers-config.json @@ -0,0 +1,18 @@ +{ + "sdc-connections":{ + "sdc-controller":{ + "user": "clamp", + "consumerGroup": "clamp", + "consumerId": "clamp", + "environmentName": "AUTO", + "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443", + "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981", + "pollingInterval":30, + "pollingTimeout":30, + "activateServerTLSAuth":"false", + "keyStorePassword":"", + "keyStorePath":"", + "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"] + } + } +} diff --git a/kubernetes/clamp/components/clamp-backend/templates/NOTES.txt b/kubernetes/clamp/components/clamp-backend/templates/NOTES.txt new file mode 100644 index 0000000000..e36d6a5bfb --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/templates/NOTES.txt @@ -0,0 +1,32 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit https://127.0.0.1:8443 to use your application" + kubectl port-forward $POD_NAME 8443:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/clamp/components/clamp-backend/templates/configmap.yaml b/kubernetes/clamp/components/clamp-backend/templates/configmap.yaml new file mode 100644 index 0000000000..1a5b0ce06a --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/templates/configmap.yaml @@ -0,0 +1,31 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} + +{{ include "common.log.configMap" . }} diff --git a/kubernetes/clamp/components/clamp-backend/templates/deployment.yaml b/kubernetes/clamp/components/clamp-backend/templates/deployment.yaml new file mode 100644 index 0000000000..9153f9d0ff --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/templates/deployment.yaml @@ -0,0 +1,128 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + initContainers: + - command: + - /app/ready.py + args: + - --container-name + - clamp-mariadb + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: {{ include "repositoryGenerator.image.readiness" . }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness +{{ include "common.certInitializer.initContainer" . | indent 6 }} + containers: + # side car containers + {{ if .Values.global.centralizedLoggingEnabled }}{{ include "common.log.sidecar" . | nindent 8 }}{{ end }} + # main container + - name: {{ include "common.name" . }} + image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - sh + workingDir: "/opt/clamp/" + args: + - -c + - | + {{- if .Values.global.aafEnabled }} + export $(grep '^cadi_' {{ .Values.certInitializer.credsPath }}/org.onap.clamp.cred.props | xargs -0) + {{- end }} + java -Djava.security.egd=file:/dev/./urandom ${JAVA_RAM_CONFIGURATION} -jar ./app.jar + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }} + - name: logs + mountPath: {{ .Values.log.path }} + - mountPath: /opt/clamp/sdc-controllers-config.json + name: {{ include "common.fullname" . }}-config + subPath: sdc-controllers-config.json + - mountPath: /opt/clamp/application.properties + name: {{ include "common.fullname" . }}-config + subPath: application.properties + env: + - name: MYSQL_USER + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }} + - name: MYSQL_PASSWORD + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }} + - name: MYSQL_DATABASE + value: {{ tpl .Values.db.databaseName .}} + {{- if ne "unlimited" (include "common.flavor" .) }} + - name: JAVA_RAM_CONFIGURATION + value: -XX:MinRAMPercentage=50 -XX:MaxRAMPercentage=75 + {{- end }} + resources: {{ include "common.resources" . | nindent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: {{ toYaml .Values.nodeSelector | nindent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: {{ toYaml .Values.affinity | nindent 10 }} + {{- end }} + volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }} + - name: {{ include "common.fullname" . }}-config + configMap: + name: {{ include "common.fullname" . }} + items: + - key: sdc-controllers-config.json + path: sdc-controllers-config.json + - key: application.properties + path: application.properties + - name: logs + emptyDir: {} + {{ if .Values.global.centralizedLoggingEnabled }}{{ include "common.log.volumes" . | nindent 8 }}{{ end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-backend/templates/secrets.yaml b/kubernetes/clamp/components/clamp-backend/templates/secrets.yaml new file mode 100644 index 0000000000..4cf8155f6c --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/templates/secrets.yaml @@ -0,0 +1,18 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{ include "common.secretFast" . }} diff --git a/kubernetes/clamp/components/clamp-backend/templates/service.yaml b/kubernetes/clamp/components/clamp-backend/templates/service.yaml new file mode 100644 index 0000000000..c01d36a53d --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/templates/service.yaml @@ -0,0 +1,42 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-backend/values.yaml b/kubernetes/clamp/components/clamp-backend/values.yaml new file mode 100644 index 0000000000..efd08ba4d0 --- /dev/null +++ b/kubernetes/clamp/components/clamp-backend/values.yaml @@ -0,0 +1,151 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018-2019 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: # global defaults + nodePortPrefix: 302 + persistence: {} + centralizedLoggingEnabled: true + #AAF service + aafEnabled: true + +################################################################# +# AAF part +################################################################# +certInitializer: + permission_user: 1000 + permission_group: 999 + keystoreFile: 'org.onap.clamp.p12' + truststoreFile: 'org.onap.clamp.trust.jks' + keyFile: 'org.onap.clamp.keyfile' + truststoreFileONAP: 'truststoreONAPall.jks' + nameOverride: clamp-backend-cert-initializer + aafDeployFqi: deployer@people.osaaf.org + aafDeployPass: demo123456! + fqdn: clamp + fqi: clamp@clamp.onap.org + public_fqdn: clamp.onap.org + cadi_longitude: '-72.0' + cadi_latitude: '38.0' + app_ns: org.osaaf.aaf + credsPath: /opt/app/osaaf/local + aaf_add_config: > + /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop; + grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_truststore_password=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_truststore_password.pwd; + grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_key_password=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_key_password.pwd; + grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_keystore_password=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_keystore_password.pwd; + grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_keystore_password_p12=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_keystore_password_p12.pwd; + cd {{ .Values.credsPath }}; + chmod a+rx *; + +secrets: + - uid: db-secret + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}' + login: '{{ .Values.db.user }}' + password: '{{ .Values.db.password }}' + passwordPolicy: required + +flavor: small + +# application image +image: onap/clamp-backend:5.1.5 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# log configuration +log: + path: /var/log/onap + +################################################################# +# Application configuration defaults. +################################################################# + +#####dummy values for db user and password to pass lint!!!####### + +db: + user: dummyclds + password: dummysidnnd83K + databaseName: dummycldsdb4 + +config: + log: + logstashServiceName: log-ls + logstashPort: 5044 + mysqlPassword: strong_pitchou + dataRootDir: /dockerdata-nfs + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 120 + periodSeconds: 10 + timeoutSeconds: 3 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + timeoutSeconds: 3 + +service: + type: ClusterIP + name: clamp-backend + portName: clamp-backend + internalPort: 8443 + externalPort: 443 + +ingress: + enabled: false + +#resources: {} +# We usually recommend not to specify default resources and to leave this as a conscious +# choice for the user. This also increases chances charts run on environments with little +# resources, such as Minikube. If you do want to specify resources, uncomment the following +# lines, adjust them as necessary, and remove the curly braces after 'resources:'. +# +# Example: +# Configure resource requests and limits +# ref: http://kubernetes.io/docs/user-guide/compute-resources/ +# Minimum memory for development is 2 CPU cores and 4GB memory +# Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 1Gi + requests: + cpu: 1m + memory: 1Gi + large: + limits: + cpu: 1 + memory: 3Gi + requests: + cpu: 10m + memory: 3Gi + unlimited: {} diff --git a/kubernetes/clamp/components/clamp-dash-es/Chart.yaml b/kubernetes/clamp/components/clamp-dash-es/Chart.yaml new file mode 100644 index 0000000000..b2f8624a4b --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Clamp Dashboard Elasticsearch +name: clamp-dash-es +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-dash-es/requirements.yaml b/kubernetes/clamp/components/clamp-dash-es/requirements.yaml new file mode 100644 index 0000000000..c388db3113 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/requirements.yaml @@ -0,0 +1,25 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~6.x-0 + repository: '@local' + - name: certInitializer + version: ~6.x-0 + repository: '@local' + - name: repositoryGenerator + version: ~6.x-0 + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml b/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml new file mode 100644 index 0000000000..9e04d5ae01 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml @@ -0,0 +1,138 @@ +--- +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ======================== Elasticsearch Configuration ========================= +# +# NOTE: Elasticsearch comes with reasonable defaults for most settings. +# Before you set out to tweak and tune the configuration, make sure you +# understand what are you trying to accomplish and the consequences. +# +# The primary way of configuring a node is via this file. This template lists +# the most important settings you may want to configure for a production cluster. +# +# Please consult the documentation for further information on configuration options: +# https://www.elastic.co/guide/en/elasticsearch/reference/index.html +# +# ---------------------------------- Cluster ----------------------------------- +# +# Name of the Elasticsearch cluster. +# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster. +# The default name is elasticsearch, but you should change it to an appropriate name which describes the +# purpose of the cluster. +# +## Default Elasticsearch configuration from elasticsearch-docker. +## from https://opendistro.github.io/for-elasticsearch-docs/docs/elasticsearch/configuration/ +# + +cluster.name: "clamp-dashboard" +node.name: "cldash-es-node1" +# ---------------------------------- Network ----------------------------------- +# +# Set the bind address to a specific IP (IPv4 or IPv6): +# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a +# non-loopback address. +network.host: 0.0.0.0 +# +# Set a custom port for HTTP: If required, default is 9200-9300 +# +#http.port: $http.port +# +# For more information, consult the network module documentation. +# ----------------------------------- Paths ------------------------------------ +# +# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma. +# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure +# may change & can deal to data loss. +path.data: /usr/share/elasticsearch/data +# +# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs", +# as on upgrading Elasticsearch, directory structure may change. +path.logs: /usr/share/elasticsearch/logs +# +# ----------------------------------- Memory ----------------------------------- +# +# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk. +# Lock the memory on startup. +# +bootstrap.memory_lock: false +# +# Make sure that the heap size is set to about half the memory available +# on the system and that the owner of the process is allowed to use this +# limit. +# +# Elasticsearch performs poorly when the system is swapping the memory. +# +# --------------------------------- Discovery ---------------------------------- +# +# Pass an initial list of hosts to perform discovery when new node is started +# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster +# that are likely to be live and contactable. +# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try +# to connect to other nodes running on the same server. +# # minimum_master_nodes need to be explicitly set when bound on a public IP +# # set to 1 to allow single node clusters +# # Details: https://github.com/elastic/elasticsearch/pull/17288 +discovery.zen.minimum_master_nodes: 1 +discovery.seed_hosts: [] +# # Breaking change in 7.0 +# # https://www.elastic.co/guide/en/elasticsearch/reference/7.0/breaking-changes-7.0.html#breaking_70_discovery_changes +cluster.initial_master_nodes: + - cldash-es-node1 +# - docker-test-node-1 +# ---------------------------------- Various ----------------------------------- +# +# Require explicit names when deleting indices: +# +#action.destructive_requires_name: true +# Set a custom port for HTTP: If required, default is 9200-9300 +# This is used for REST APIs +http.port: {{.Values.service.externalPort}} +# Port to bind for communication between nodes. Accepts a single value or a range. +# If a range is specified, the node will bind to the first available port in the range. +# Defaults to 9300-9400. +# More info: +transport.tcp.port: {{.Values.service.externalPort2}} + +######## Start OpenDistro for Elasticsearch Security Demo Configuration ######## +# WARNING: revise all the lines below before you go into production +{{- if .Values.global.aafEnabled }} +opendistro_security.ssl.transport.pemcert_filepath: {{ .Values.certInitializer.clamp_pem }} +opendistro_security.ssl.transport.pemkey_filepath: {{ .Values.certInitializer.clamp_key }} +opendistro_security.ssl.transport.pemtrustedcas_filepath: {{ .Values.certInitializer.clamp_ca_certs_pem }} +opendistro_security.ssl.http.pemcert_filepath: {{ .Values.certInitializer.clamp_pem }} +opendistro_security.ssl.http.pemkey_filepath: {{ .Values.certInitializer.clamp_key }} +opendistro_security.ssl.http.pemtrustedcas_filepath: {{ .Values.certInitializer.clamp_ca_certs_pem }} +{{- else }} +opendistro_security.ssl.transport.pemcert_filepath: esnode.pem +opendistro_security.ssl.transport.pemkey_filepath: esnode-key.pem +opendistro_security.ssl.transport.pemtrustedcas_filepath: root-ca.pem +opendistro_security.ssl.http.pemcert_filepath: esnode.pem +opendistro_security.ssl.http.pemkey_filepath: esnode-key.pem +opendistro_security.ssl.http.pemtrustedcas_filepath: root-ca.pem +{{- end }} +opendistro_security.ssl.transport.enforce_hostname_verification: false +opendistro_security.ssl.http.enabled: {{.Values.security.ssl.enabled}} + +opendistro_security.allow_unsafe_democertificates: true +opendistro_security.allow_default_init_securityindex: true +opendistro_security.authcz.admin_dn: + - CN=kirk,OU=client,O=client,L=test, C=de + +opendistro_security.audit.type: internal_elasticsearch +opendistro_security.enable_snapshot_restore_privilege: true +opendistro_security.check_snapshot_restore_write_privileges: true +opendistro_security.restapi.roles_enabled: ["all_access", "security_rest_api_access"] +cluster.routing.allocation.disk.threshold_enabled: false +node.max_local_storage_nodes: 3 +######## End OpenDistro for Elasticsearch Security Demo Configuration ######## diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml new file mode 100644 index 0000000000..fe0349ede9 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml @@ -0,0 +1,29 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml new file mode 100644 index 0000000000..d7aa77cd01 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml @@ -0,0 +1,138 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + initContainers: + - command: + - /bin/sh + - -c + - | + sysctl -w vm.max_map_count=262144 + mkdir -p /usr/share/elasticsearch/logs + mkdir -p /usr/share/elasticsearch/data + chmod -R 777 /usr/share/elasticsearch + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + securityContext: + privileged: true + image: {{ include "repositoryGenerator.image.busybox" . }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: init-sysctl + volumeMounts: + - name: {{ include "common.fullname" . }}-logs + mountPath: /usr/share/elasticsearch/logs/ + - name: {{ include "common.fullname" . }}-data + mountPath: /usr/share/elasticsearch/data/ +{{ include "common.certInitializer.initContainer" . | indent 6 }} + containers: + - name: {{ include "common.name" . }} + image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + {{- if .Values.global.aafEnabled }} + command: + - sh + args: + - -c + - | + cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_key }} /usr/share/elasticsearch/config/{{ .Values.certInitializer.clamp_key }} + cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_pem }} /usr/share/elasticsearch/config/{{ .Values.certInitializer.clamp_pem }} + cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }} /usr/share/elasticsearch/config/{{ .Values.certInitializer.clamp_ca_certs_pem }} + /usr/local/bin/docker-entrypoint.sh + {{- end }} + ports: + - containerPort: {{ .Values.service.internalPort }} + name: {{ include "common.servicename" . }} + - containerPort: {{ .Values.service.internalPort2 }} + name: {{ include "common.servicename" . }}2 +# disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort2 }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + timeoutSeconds: {{ .Values.readiness.timeoutSeconds }} + env: + volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }} + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml + name: {{ include "common.fullname" . }}-config + subPath: elasticsearch.yml + - mountPath: /usr/share/elasticsearch/data/ + name: {{ include "common.fullname" . }}-data + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }} + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" . }}-config + configMap: + name: {{ include "common.fullname" . }}-configmap + items: + - key: elasticsearch.yml + path: elasticsearch.yml + - name: {{ include "common.fullname" . }}-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + - name: {{ include "common.fullname" . }}-logs + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPathLogs }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml new file mode 100644 index 0000000000..3669621b24 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml @@ -0,0 +1,39 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +{{- if eq "True" (include "common.needPV" .) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-data + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: "{{ include "common.fullname" . }}-data" + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml new file mode 100644 index 0000000000..6ae4eea0d3 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml @@ -0,0 +1,38 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: {{ include "common.storageClass" . }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml new file mode 100644 index 0000000000..9c182edbc0 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml @@ -0,0 +1,70 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} + annotations: +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.config.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.config.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} +--- +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }}-tcp + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} + annotations: +spec: + type: {{ .Values.service.type2 }} + ports: + {{if eq .Values.service.type2 "NodePort" -}} + - port: {{ .Values.service.externalPort2 }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }} + name: {{ .Values.config.portName2 }} + {{- else -}} + - port: {{ .Values.service.externalPort2 }} + targetPort: {{ .Values.service.internalPort2 }} + name: {{ .Values.config.portName2 }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-dash-es/values.yaml b/kubernetes/clamp/components/clamp-dash-es/values.yaml new file mode 100644 index 0000000000..1e2ae4778d --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/values.yaml @@ -0,0 +1,163 @@ +# Copyright © 2020 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + persistence: {} + centralizedLoggingEnabled: true + #AAF service + aafEnabled: true + +################################################################# +# AAF part +################################################################# +certInitializer: + permission_user: 1000 + permission_group: 999 + addconfig: true + keystoreFile: "org.onap.clamp.p12" + truststoreFile: "org.onap.clamp.trust.jks" + keyFile: "org.onap.clamp.keyfile" + truststoreFileONAP: "truststoreONAPall.jks" + clamp_key: "org.onap.clamp.crt.key" + clamp_pem: "org.onap.clamp.key.pem" + clamp_ca_certs_pem: "clamp-ca-certs.pem" + nameOverride: clamp-es-cert-initializer + aafDeployFqi: deployer@people.osaaf.org + aafDeployPass: demo123456! + # aafDeployCredsExternalSecret: some secret + fqdn: clamp + fqi: clamp@clamp.onap.org + public_fqdn: clamp.onap.org + cadi_longitude: "0.0" + cadi_latitude: "0.0" + app_ns: org.osaaf.aaf + credsPath: /opt/app/osaaf/local + aaf_add_config: > + /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop; + export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0); + cd {{ .Values.credsPath }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }}; + chmod a+rx *; + +flavor: small + +################################################################# +# Application configuration defaults. +################################################################# +# application image +image: onap/clamp-dashboard-elasticsearch:5.0.4 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +# Example: +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 180 + periodSeconds: 30 + timeoutSeconds: 5 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 180 + periodSeconds: 30 + timeoutSeconds: 5 + +## Persist data to a persitent volume +persistence: + enabled: true + + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + accessMode: ReadWriteOnce + size: 4Gi + mountPath: /dockerdata-nfs + mountSubPath: clamp/dashboard-elasticsearch/data + mountSubPathLogs: clamp + +security: + ssl: + enabled: true + +service: + type: ClusterIP + name: cdash-es + portName: cdash-es-rest + externalPort: 9200 + internalPort: 9200 + type2: ClusterIP + portName2: cdash-es-tcp + externalPort2: 9300 + internalPort2: 9300 + +ingress: + enabled: false + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 4Gi + requests: + cpu: 10m + memory: 2.5Gi + large: + limits: + cpu: 1 + memory: 4Gi + requests: + cpu: 10m + memory: 2.5Gi + unlimited: {} diff --git a/kubernetes/clamp/components/clamp-dash-kibana/Chart.yaml b/kubernetes/clamp/components/clamp-dash-kibana/Chart.yaml new file mode 100644 index 0000000000..5d897d96eb --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Clamp Dashboard Kibana +name: clamp-dash-kibana +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-dash-kibana/requirements.yaml b/kubernetes/clamp/components/clamp-dash-kibana/requirements.yaml new file mode 100644 index 0000000000..c388db3113 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/requirements.yaml @@ -0,0 +1,25 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~6.x-0 + repository: '@local' + - name: certInitializer + version: ~6.x-0 + repository: '@local' + - name: repositoryGenerator + version: ~6.x-0 + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/clamp/components/clamp-dash-kibana/resources/config/kibana.yml b/kubernetes/clamp/components/clamp-dash-kibana/resources/config/kibana.yml new file mode 100644 index 0000000000..b7a8fbf348 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/resources/config/kibana.yml @@ -0,0 +1,41 @@ +{{/* +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License.# Default Kibana configuration from kibana-docker. +*/}} + +server.name: "Clamp CL Dashboard" +server.host: "0" +# Kibana is served by a back end server. This setting specifies the port to use. +server.port: {{.Values.service.externalPort}} + +server.ssl.enabled: {{.Values.config.sslEnabled}} +{{- if .Values.global.aafEnabled }} +server.ssl.certificate: {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_pem }} +server.ssl.key: {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_key }} +{{ else }} +server.ssl.certificate: {{.Values.config.sslPemCertFilePath}} +server.ssl.key: {{.Values.config.sslPemkeyFilePath}} +{{- end }} +# The URL of the Elasticsearch instance to use for all your queries. +elasticsearch.hosts: ${elasticsearch_base_url} + +elasticsearch.ssl.verificationMode: none +elasticsearch.username: {{.Values.config.elasticUSR}} +elasticsearch.password: {{.Values.config.elasticPWD}} + +elasticsearch.requestHeadersWhitelist: ["securitytenant","Authorization"] + +opendistro_security.multitenancy.enabled: true +opendistro_security.multitenancy.tenants.preferred: ["Private", "Global"] +opendistro_security.readonly_mode.roles: ["kibana_read_only"] diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/configmap.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/configmap.yaml new file mode 100644 index 0000000000..48d85478c4 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/templates/configmap.yaml @@ -0,0 +1,38 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: Secret +metadata: + name: {{ include "common.fullname" . }}-aaf-pem-keys + namespace: {{ include "common.namespace" . }} +type: Opaque +data: +{{ tpl (.Files.Glob "resources/certs/*").AsSecrets . | indent 2 }} diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/deployment.yaml new file mode 100644 index 0000000000..8cb95cdf0b --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/templates/deployment.yaml @@ -0,0 +1,107 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + initContainers: + - command: + - /app/ready.py + args: + - --container-name + - clamp-dash-es + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: {{ include "repositoryGenerator.image.readiness" . }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness +{{ include "common.certInitializer.initContainer" . | indent 6 }} + containers: + - name: {{ include "common.name" . }} + image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + name: {{ include "common.servicename" . }} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} +# disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + env: + - name: elasticsearch_base_url + value: "{{ternary "https" "http" .Values.security.ssl.enabled}}://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}" + volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }} + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /usr/share/kibana/config/kibana.yml + name: {{ include "common.fullname" . }} + subPath: kibana.yml + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }} + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" . }} + configMap: + name: {{ include "common.fullname" . }} + items: + - key: kibana.yml + path: kibana.yml + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/ingress.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/ingress.yaml new file mode 100644 index 0000000000..e5d7174e85 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/templates/ingress.yaml @@ -0,0 +1,16 @@ +{{/* # Copyright © 2020 Samsung, Orange +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{ include "common.ingress" . }} diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/service.yaml new file mode 100644 index 0000000000..f1b6cf55c6 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/templates/service.yaml @@ -0,0 +1,43 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} + annotations: +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.config.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.config.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-dash-kibana/values.yaml b/kubernetes/clamp/components/clamp-dash-kibana/values.yaml new file mode 100644 index 0000000000..9b5f1fc344 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-kibana/values.yaml @@ -0,0 +1,152 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + persistence: {} + centralizedLoggingEnabled: true + #AAF service + aafEnabled: true + +################################################################# +# AAF part +################################################################# +certInitializer: + permission_user: 1000 + permission_group: 999 + addconfig: true + keystoreFile: "org.onap.clamp.p12" + truststoreFile: "org.onap.clamp.trust.jks" + keyFile: "org.onap.clamp.keyfile" + truststoreFileONAP: "truststoreONAPall.jks" + clamp_key: "org.onap.clamp.crt.key" + clamp_pem: "org.onap.clamp.key.pem" + clamp_ca_certs_pem: "clamp-ca-certs.pem" + nameOverride: clamp-kibana-cert-initializer + aafDeployFqi: deployer@people.osaaf.org + aafDeployPass: demo123456! + # aafDeployCredsExternalSecret: some secret + fqdn: clamp + fqi: clamp@clamp.onap.org + public_fqdn: clamp.onap.org + cadi_longitude: "0.0" + cadi_latitude: "0.0" + app_ns: org.osaaf.aaf + credsPath: /opt/app/osaaf/local + aaf_add_config: > + /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop; + export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0); + cd {{ .Values.credsPath }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }}; + chmod a+rx *; + +flavor: small + +################################################################# +# Application configuration defaults. +################################################################# +# application image +image: onap/clamp-dashboard-kibana:5.0.4 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +#the 'sslEnabled flag' here below is for the kibana UI connection (web browser connection to kibana) +config: + elasticsearchServiceName: cdash-es + elasticsearchPort: 9200 + elasticUSR: kibanaserver + elasticPWD: kibanaserver + sslEnabled: true + sslPemCertFilePath: /usr/share/kibana/config/keystore/org.onap.clamp.crt.pem + sslPemkeyFilePath: /usr/share/kibana/config/keystore/org.onap.clamp.key.pem + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 360 + periodSeconds: 30 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 360 + periodSeconds: 30 + +#internal ssl security scheme for elasticsearch connection mainly +security: + ssl: + enabled: true + +service: + #Example service definition with external, internal and node ports. + #Services may use any combination of ports depending on the 'type' of + #service being defined. + type: NodePort + name: cdash-kibana + portName: cdash-kibana-http + externalPort: 5601 + internalPort: 5601 + nodePort: 90 +ingress: + enabled: false + service: + - baseaddr: "cdash-kibana" + name: "cdash-kibana" + port: 5601 + config: + ssl: "redirect" + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 2Gi + requests: + cpu: 10m + memory: 750Mi + large: + limits: + cpu: 1 + memory: 2Gi + requests: + cpu: 10m + memory: 750Mi + unlimited: {} diff --git a/kubernetes/clamp/components/clamp-dash-logstash/Chart.yaml b/kubernetes/clamp/components/clamp-dash-logstash/Chart.yaml new file mode 100644 index 0000000000..9fc0317fd3 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Clamp Dashboard Logstash +name: clamp-dash-logstash +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-dash-logstash/requirements.yaml b/kubernetes/clamp/components/clamp-dash-logstash/requirements.yaml new file mode 100644 index 0000000000..c388db3113 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/requirements.yaml @@ -0,0 +1,25 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~6.x-0 + repository: '@local' + - name: certInitializer + version: ~6.x-0 + repository: '@local' + - name: repositoryGenerator + version: ~6.x-0 + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/clamp/components/clamp-dash-logstash/resources/config/logstash.yml b/kubernetes/clamp/components/clamp-dash-logstash/resources/config/logstash.yml new file mode 100644 index 0000000000..1e06e34cfb --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/resources/config/logstash.yml @@ -0,0 +1,26 @@ +{{/* +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +http.host: "0.0.0.0" +## Path where pipeline configurations reside +path.config: /usr/share/logstash/pipeline + +## Type of queue : memeory based or file based +#queue.type: persisted +## Size of queue +#queue.max_bytes: 1024mb +## Setting true makes logstash check periodically for change in pipeline configurations +config.reload.automatic: true + diff --git a/kubernetes/clamp/components/clamp-dash-logstash/resources/config/pipeline.conf b/kubernetes/clamp/components/clamp-dash-logstash/resources/config/pipeline.conf new file mode 100644 index 0000000000..b978e766d3 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/resources/config/pipeline.conf @@ -0,0 +1,277 @@ +{{/* +# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +input { + http_poller { + urls => { + event_queue => { + method => get + url => "${dmaap_base_url}/events/${event_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000" + headers => { + Accept => "application/json" + } + topic => "${event_topic}" + tags => [ "dmaap_source" ] + } + notification_queue => { + method => get + url => "${dmaap_base_url}/events/${notification_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000" + headers => { + Accept => "application/json" + } + topic => "${notification_topic}" + tags => [ "dmaap_source" ] + } + request_queue => { + method => get + url => "${dmaap_base_url}/events/${request_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000" + headers => { + Accept => "application/json" + } + topic => "${request_topic}" + tags => [ "dmaap_source" ] + } + } + socket_timeout => 30 + request_timeout => 30 + schedule => { "every" => "1m" } + codec => "plain" +{{- if .Values.global.aafEnabled }} + cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}" +{{- else }} + cacert => "/certs.d/aafca.pem" +{{- end }} + } +} + + +filter { + # avoid noise if no entry in the list + if [message] == "[]" { + drop { } + } + + if [http_request_failure] or [@metadata][code] != 200 { + mutate { + add_tag => [ "error" ] + } + } + + if "dmaap_source" in [@metadata][request][tags] { + # + # Dmaap provides a json list, whose items are Strings containing the event + # provided to Dmaap, which itself is an escaped json. + # + # We first need to parse the json as we have to use the plaintext as it cannot + # work with list of events, then split that list into multiple string events, + # that we then transform into json. + # + json { + source => "[message]" + target => "message" + } + + split { + field => "message" + } + json { + source => "message" + } + mutate { + remove_field => [ "message" ] + } + } + + # + # Some timestamps are expressed as milliseconds, some are in microseconds + # + if [closedLoopAlarmStart] { + ruby { + code => " + if event.get('closedLoopAlarmStart').to_s.to_i(10) > 9999999999999 + event.set('closedLoopAlarmStart', event.get('closedLoopAlarmStart').to_s.to_i(10) / 1000) + else + event.set('closedLoopAlarmStart', event.get('closedLoopAlarmStart').to_s.to_i(10)) + end + " + } + date { + match => [ "closedLoopAlarmStart", UNIX_MS ] + target => "closedLoopAlarmStart" + } + } + + if [closedLoopAlarmEnd] { + ruby { + code => " + if event.get('closedLoopAlarmEnd').to_s.to_i(10) > 9999999999999 + event.set('closedLoopAlarmEnd', event.get('closedLoopAlarmEnd').to_s.to_i(10) / 1000) + else + event.set('closedLoopAlarmEnd', event.get('closedLoopAlarmEnd').to_s.to_i(10)) + end + " + } + date { + match => [ "closedLoopAlarmEnd", UNIX_MS ] + target => "closedLoopAlarmEnd" + } + + } + + + # + # Notification time are expressed under the form "yyyy-MM-dd HH:mm:ss", which + # is close to ISO8601, but lacks of T as spacer: "yyyy-MM-ddTHH:mm:ss" + # + if [notificationTime] { + mutate { + gsub => [ + "notificationTime", " ", "T" + ] + } + date { + match => [ "notificationTime", ISO8601 ] + target => "notificationTime" + } + } + + + # + # Renaming some fields for readability + # + if [AAI][generic-vnf.vnf-name] { + mutate { + add_field => { "vnfName" => "%{[AAI][generic-vnf.vnf-name]}" } + } + } + if [AAI][generic-vnf.vnf-type] { + mutate { + add_field => { "vnfType" => "%{[AAI][generic-vnf.vnf-type]}" } + } + } + if [AAI][vserver.vserver-name] { + mutate { + add_field => { "vmName" => "%{[AAI][vserver.vserver-name]}" } + } + } + if [AAI][complex.city] { + mutate { + add_field => { "locationCity" => "%{[AAI][complex.city]}" } + } + } + if [AAI][complex.state] { + mutate { + add_field => { "locationState" => "%{[AAI][complex.state]}" } + } + } + + + # + # Adding some flags to ease aggregation + # + if [closedLoopEventStatus] =~ /(?i)ABATED/ { + mutate { + add_field => { "flagAbated" => "1" } + } + } + if [notification] =~ /^.*?(?:\b|_)FINAL(?:\b|_).*?(?:\b|_)FAILURE(?:\b|_).*?$/ { + mutate { + add_field => { "flagFinalFailure" => "1" } + } + } + + + if "error" not in [@metadata][request][tags]{ + # + # Creating data for a secondary index + # + clone { + clones => [ "event-cl-aggs" ] + add_tag => [ "event-cl-aggs" ] + } + + if "event-cl-aggs" in [@metadata][request][tags]{ + # + # we only need a few fields for aggregations; remove all fields from clone except : + # vmName,vnfName,vnfType,requestID,closedLoopAlarmStart, closedLoopControlName,closedLoopAlarmEnd,abated,nbrDmaapevents,finalFailure + # + prune { + whitelist_names => ["^@.*$","^topic$","^type$","^tags$","^flagFinalFailure$","^flagAbated$","^locationState$","^locationCity$","^vmName$","^vnfName$","^vnfType$","^requestID$","^closedLoopAlarmStart$","^closedLoopControlName$","^closedLoopAlarmEnd$","^target$","^target_type$","^triggerSourceName$","^policyScope$","^policyName$","^policyVersion$"] + } + + } + } +} + + +output { + stdout { + codec => rubydebug + } + + if "error" in [tags] { + elasticsearch { + ilm_enabled => false + codec => "json" +{{- if .Values.global.aafEnabled }} + cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}" +{{- else }} + cacert => "/clamp-cert/ca-certs.pem" +{{- end }} + ssl_certificate_verification => false + hosts => ["${elasticsearch_base_url}"] + user => ["${logstash_user}"] + password => ["${logstash_pwd}"] + index => "errors-%{+YYYY.MM.DD}" + doc_as_upsert => true + } + + } else if "event-cl-aggs" in [tags] { + elasticsearch { + ilm_enabled => false + codec => "json" + hosts => ["${elasticsearch_base_url}"] +{{- if .Values.global.aafEnabled }} + cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}" +{{- else }} + cacert => "/clamp-cert/ca-certs.pem" +{{- end }} + ssl_certificate_verification => false + user => ["${logstash_user}"] + password => ["${logstash_pwd}"] + document_id => "%{requestID}" + index => "events-cl-%{+YYYY.MM.DD}" # creates daily indexes for control loop + doc_as_upsert => true + action => "update" + } + + } else { + elasticsearch { + ilm_enabled => false + codec => "json" + hosts => ["${elasticsearch_base_url}"] +{{- if .Values.global.aafEnabled }} + cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}" +{{- else }} + cacert => "/clamp-cert/ca-certs.pem" +{{- end }} + ssl_certificate_verification => false + user => ["${logstash_user}"] + password => ["${logstash_pwd}"] + index => "events-%{+YYYY.MM.DD}" # creates daily indexes + doc_as_upsert => true + } + } +} diff --git a/kubernetes/clamp/components/clamp-dash-logstash/templates/configmap.yaml b/kubernetes/clamp/components/clamp-dash-logstash/templates/configmap.yaml new file mode 100644 index 0000000000..3e98246df1 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/templates/configmap.yaml @@ -0,0 +1,29 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} diff --git a/kubernetes/clamp/components/clamp-dash-logstash/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-logstash/templates/deployment.yaml new file mode 100644 index 0000000000..f098338c7f --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/templates/deployment.yaml @@ -0,0 +1,130 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + initContainers: + - command: + - /app/ready.py + args: + - --container-name + - clamp-dash-es + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: {{ include "repositoryGenerator.image.readiness" . }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness +{{ include "common.certInitializer.initContainer" . | indent 6 }} + containers: + - name: {{ include "common.name" . }} + image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + env: + - name: dmaap_consumer_group + value: "{{ .Values.config.dmaapConsumerGroup }}" + - name: dmaap_consumer_id + value: "{{ .Values.config.dmaapConsumerId }}" + - name: event_topic + value: "{{ .Values.config.eventTopic }}" + - name: notification_topic + value: "{{ .Values.config.notificationTopic }}" + - name: request_topic + value: "{{ .Values.config.requestTopic }}" + - name: dmaap_base_url + value: {{ ternary "https" "http" .Values.security.ssl.enabled }}://{{ .Values.config.dmaapHost }}.{{ include "common.namespace" . }}:{{ .Values.config.dmaapPort }} + - name: logstash_user + value: "{{ .Values.config.logstash_user }}" + - name: logstash_pwd + value: "{{ .Values.config.logstash_pwd }}" + - name: elasticsearch_base_url + value: "{{ ternary "https" "http" .Values.security.ssl.enabled }}://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}" + ports: + - containerPort: {{ .Values.service.internalPort }} + name: {{ include "common.servicename" . }} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + timeoutSeconds: {{ .Values.readiness.timeoutSeconds }} +# disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} + {{ end -}} + volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }} + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /usr/share/logstash/config/logstash.yml + name: {{ include "common.fullname" . }} + subPath: logstash.yml + - mountPath: /usr/share/logstash/pipeline/logstash.conf + name: {{ include "common.fullname" . }} + subPath: pipeline.conf + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }} + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" . }} + configMap: + name: {{ include "common.fullname" . }} + items: + - key: logstash.yml + path: logstash.yml + - key: pipeline.conf + path: pipeline.conf + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-dash-logstash/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-logstash/templates/service.yaml new file mode 100644 index 0000000000..f1b6cf55c6 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/templates/service.yaml @@ -0,0 +1,43 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} + annotations: +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.config.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.config.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-dash-logstash/values.yaml b/kubernetes/clamp/components/clamp-dash-logstash/values.yaml new file mode 100644 index 0000000000..9aab3af252 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-logstash/values.yaml @@ -0,0 +1,152 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + persistence: {} + centralizedLoggingEnabled: true + #AAF service + aafEnabled: true + +################################################################# +# AAF part +################################################################# +certInitializer: + permission_user: 1000 + permission_group: 999 + addconfig: true + keystoreFile: "org.onap.clamp.p12" + truststoreFile: "org.onap.clamp.trust.jks" + keyFile: "org.onap.clamp.keyfile" + truststoreFileONAP: "truststoreONAPall.jks" + clamp_key: "org.onap.clamp.crt.key" + clamp_pem: "org.onap.clamp.key.pem" + clamp_ca_certs_pem: "clamp-ca-certs.pem" + nameOverride: clamp-logstash-cert-initializer + aafDeployFqi: deployer@people.osaaf.org + aafDeployPass: demo123456! + # aafDeployCredsExternalSecret: some secret + fqdn: clamp + fqi: clamp@clamp.onap.org + public_fqdn: clamp.onap.org + cadi_longitude: "0.0" + cadi_latitude: "0.0" + app_ns: org.osaaf.aaf + credsPath: /opt/app/osaaf/local + aaf_add_config: > + /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop; + export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0); + cd {{ .Values.credsPath }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }}; + openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }}; + chmod a+rx *; + +flavor: small + +################################################################# +# Application configuration defaults. +################################################################# + +# application image +image: onap/clamp-dashboard-logstash:5.0.4 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: + elasticsearchServiceName: cdash-es + elasticsearchPort: 9200 + dmaapHost: message-router + dmaapSchemeSSL: https + dmaapSchemeNoSSL: http + dmaapPort: 3905 + dmaapConsumerGroup: "clampdashboard" + dmaapConsumerId: "clampdashboard" + eventTopic: "DCAE-CL-EVENT" + notificationTopic: "POLICY-CL-MGT" + requestTopic: "APPC-CL" + logstash_user: "logstash" + logstash_pwd: "logstash" + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 900 + periodSeconds: 20 + timeoutSeconds: 5 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 900 + periodSeconds: 20 + timeoutSeconds: 5 + +security: + ssl: + enabled: true + +service: + #Example service definition with external, internal and node ports. + #Services may use any combination of ports depending on the 'type' of + #service being defined. + type: ClusterIP + name: cdash-ls + portName: cdash-ls-healthcheck + externalPort: 9600 + internalPort: 9600 +ingress: + enabled: false + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 1.3Gi + requests: + cpu: 10m + memory: 750Mi + large: + limits: + cpu: 1 + memory: 1.3Gi + requests: + cpu: 10m + memory: 750Mi + unlimited: {} diff --git a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml new file mode 100644 index 0000000000..91984c1014 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: MariaDB Service +name: clamp-mariadb +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt new file mode 100644 index 0000000000..1103affff1 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt @@ -0,0 +1,32 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml new file mode 100644 index 0000000000..b5d66f3805 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml @@ -0,0 +1,21 @@ +# Copyright © 2020 Samsung Electronics +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~6.x-0 + repository: '@local' + - name: repositoryGenerator + version: ~6.x-0 + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh new file mode 100755 index 0000000000..71f32e2eff --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh @@ -0,0 +1,198 @@ +#!/bin/bash +set -eo pipefail +shopt -s nullglob + +# if command starts with an option, prepend mysqld +if [ "${1:0:1}" = '-' ]; then + set -- mysqld "$@" +fi + +# skip setup if they want an option that stops mysqld +wantHelp= +for arg; do + case "$arg" in + -'?'|--help|--print-defaults|-V|--version) + wantHelp=1 + break + ;; + esac +done + +prepare_password() +{ + echo "$1" | sed -e "s/'/\\\\'/g; s/\"/\\\\\"/g" +} + +# usage: file_env VAR [DEFAULT] +# ie: file_env 'XYZ_DB_PASSWORD' 'example' +# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of +# "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature) +file_env() { + local var="$1" + local fileVar="${var}_FILE" + local def="${2:-}" + if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then + echo >&2 "error: both $var and $fileVar are set (but are exclusive)" + exit 1 + fi + local val="$def" + if [ "${!var:-}" ]; then + val="${!var}" + elif [ "${!fileVar:-}" ]; then + val="$(< "${!fileVar}")" + fi + val=`prepare_password $val` + export "$var"="$val" + unset "$fileVar" +} + +_check_config() { + toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" ) + if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then + cat >&2 <<-EOM + + ERROR: mysqld failed while attempting to check config + command was: "${toRun[*]}" + + $errors + EOM + exit 1 + fi +} + +# Fetch value from server config +# We use mysqld --verbose --help instead of my_print_defaults because the +# latter only show values present in config files, and not server defaults +_get_config() { + local conf="$1"; shift + "$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \ + | awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }' + # match "datadir /some/path with/spaces in/it here" but not "--xyz=abc\n datadir (xyz)" +} + +# allow the container to be started with `--user` +if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then + _check_config "$@" + DATADIR="$(_get_config 'datadir' "$@")" + mkdir -p "$DATADIR" + find "$DATADIR" \! -user mysql -exec chown mysql '{}' + + exec gosu mysql "$BASH_SOURCE" "$@" +fi + +if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then + # still need to check config, container may have started with --user + _check_config "$@" + # Get config + DATADIR="$(_get_config 'datadir' "$@")" + + if [ ! -d "$DATADIR/mysql" ]; then + file_env 'MYSQL_ROOT_PASSWORD' + if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + echo >&2 'error: database is uninitialized and password option is not specified ' + echo >&2 ' You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD' + exit 1 + fi + + mkdir -p "$DATADIR" + + echo 'Initializing database' + # "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here) + mysql_install_db --datadir="$DATADIR" --rpm "${@:2}" + echo 'Database initialized' + + SOCKET="$(_get_config 'socket' "$@")" + "$@" --skip-networking --socket="${SOCKET}" & + pid="$!" + + mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" ) + + for i in {30..0}; do + if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then + break + fi + echo 'MySQL init process in progress...' + sleep 1 + done + if [ "$i" = 0 ]; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then + # sed is for https://bugs.mysql.com/bug.php?id=20545 + mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql + fi + + if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)" + echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD" + fi + + rootCreate= + # default root to listen for connections from anywhere + file_env 'MYSQL_ROOT_HOST' '%' + if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then + # no, we don't care if read finds a terminating character in this heredoc + # https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151 + read -r -d '' rootCreate <<-EOSQL || true + CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ; + GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ; + EOSQL + fi + + "${mysql[@]}" <<-EOSQL + -- What's done in this file shouldn't be replicated + -- or products like mysql-fabric won't work + SET @@SESSION.SQL_LOG_BIN=0; + + DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ; + SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ; + GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ; + ${rootCreate} + DROP DATABASE IF EXISTS test ; + FLUSH PRIVILEGES ; + EOSQL + + if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then + mysql+=( -p"${MYSQL_ROOT_PASSWORD}" ) + fi + + file_env 'MYSQL_DATABASE' + if [ "$MYSQL_DATABASE" ]; then + echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}" + mysql+=( "$MYSQL_DATABASE" ) + fi + + file_env 'MYSQL_USER' + file_env 'MYSQL_PASSWORD' + if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then + echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}" + + if [ "$MYSQL_DATABASE" ]; then + echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}" + fi + fi + + echo + for f in /docker-entrypoint-initdb.d/*; do + case "$f" in + *.sh) echo "$0: running $f"; . "$f" ;; + *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; + *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; + *) echo "$0: ignoring $f" ;; + esac + echo + done + + if ! kill -s TERM "$pid" || ! wait "$pid"; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + echo + echo 'MySQL init process done. Ready for start up.' + echo + fi +fi + +exec "$@" diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf new file mode 100644 index 0000000000..8b5dc2a021 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf @@ -0,0 +1,209 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# Example MySQL config file for medium systems. +# +# This is for a system with memory 8G where MySQL plays +# an important part, or systems up to 128M where MySQL is used together with +# other programs (such as a web server) +# +# In this file, you can use all long options that a program supports. +# If you want to know which options a program supports, run the program +# with the "--help" option. +*/}} + +# The following options will be passed to all MySQL clients +##[client] +##user = root +##port = 3306 +##socket = //opt/app/mysql/mysql.sock + +# Here follows entries for some specific programs + +# The MySQL server +[mysqld] +##performance_schema + +slow_query_log =ON +long_query_time =2 +slow_query_log_file =//var/lib/mysql/slow_query.log +##basedir = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64 +##datadir = //opt/app/mysql/data +##port = 3306 +##socket = //opt/app/mysql/mysql.sock +skip-external-locking +explicit_defaults_for_timestamp = true +skip-symbolic-links +local-infile = 0 +#ignore_db_dir=lost+found +key_buffer_size = 16M +max_allowed_packet = 4M +table_open_cache = 100 +sort_buffer_size = 512K +net_buffer_length = 8K +read_buffer_size = 256K +read_rnd_buffer_size = 512K +myisam_sort_buffer_size = 8M +max_connections = 500 +lower_case_table_names = 1 +thread_stack = 256K +thread_cache_size = 25 +query_cache_size = 8M +query_cache_type = 0 +query_prealloc_size = 512K +query_cache_limit = 1M + +# Password validation +##plugin-load-add=simple_password_check.so +##simple_password_check_other_characters=0 + +# Audit Log settings +plugin-load-add=server_audit.so +server_audit=FORCE_PLUS_PERMANENT +server_audit_file_path=//var/lib/mysql/audit.log +server_audit_file_rotate_size=50M +server_audit_events=CONNECT,QUERY,TABLE +server_audit_logging=on + +# Don't listen on a TCP/IP port at all. This can be a security enhancement, +# if all processes that need to connect to mysqld run on the same host. +# All interaction with mysqld must be made via Unix sockets or named pipes. +# Note that using this option without enabling named pipes on Windows +# (via the "enable-named-pipe" option) will render mysqld useless! +# +#skip-networking + +# Replication Master Server (default) +# binary logging is required for replication +##log-bin=//var/lib/mysql/mysql-bin + +# binary logging format - mixed recommended +binlog_format=row + +# required unique id between 1 and 2^32 - 1 +# defaults to 1 if master-host is not set +# but will not function as a master if omitted + +# Replication Slave (comment out master section to use this) +# +# To configure this host as a replication slave, you can choose between +# two methods : +# +# 1) Use the CHANGE MASTER TO command (fully described in our manual) - +# the syntax is: +# +# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, +# MASTER_USER=<user>, MASTER_PASSWORD=<password> ; +# +# where you replace <host>, <user>, <password> by quoted strings and +# <port> by the master's port number (3306 by default). +# +# Example: +# +# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, +# MASTER_USER='joe', MASTER_PASSWORD='secret'; +# +# OR +# +# 2) Set the variables below. However, in case you choose this method, then +# start replication for the first time (even unsuccessfully, for example +# if you mistyped the password in master-password and the slave fails to +# connect), the slave will create a master.info file, and any later +# change in this file to the variables' values below will be ignored and +# overridden by the content of the master.info file, unless you shutdown +# the slave server, delete master.info and restart the slaver server. +# For that reason, you may want to leave the lines below untouched +# (commented) and instead use CHANGE MASTER TO (see above) +# +# required unique id between 2 and 2^32 - 1 +# (and different from the master) +# defaults to 2 if master-host is set +# but will not function as a slave if omitted +#server-id = 2 +# +# The replication master for this slave - required +#master-host = <hostname> +# +# The username the slave will use for authentication when connecting +# to the master - required +#master-user = <username> +# +# The password the slave will authenticate with when connecting to +# the master - required +#master-password = <password> +# +# The port the master is listening on. +# optional - defaults to 3306 +#master-port = <port> +# +# binary logging - not required for slaves, but recommended +#log-bin=mysql-bin + +# Uncomment the following if you are using InnoDB tables +##innodb_data_home_dir = //opt/app/mysql/data +##innodb_data_file_path = ibdata1:20M:autoextend:max:32G +##innodb_log_group_home_dir = //opt/app/mysql/iblogs +# You can set .._buffer_pool_size up to 50 - 80 % +# of RAM but beware of setting memory usage too high +innodb_buffer_pool_size = 128M +#innodb_additional_mem_pool_size = 2M +# Set .._log_file_size to 25 % of buffer pool size +innodb_log_file_size = 10M +innodb_log_files_in_group = 3 +innodb_log_buffer_size = 8M +#innodb_flush_log_at_trx_commit = 1 +innodb_lock_wait_timeout = 50 +innodb_autoextend_increment = 100 +expire_logs_days = 8 +open_files_limit = 2000 +transaction-isolation=READ-COMMITTED +####### Galera parameters ####### +## Galera Provider configuration +wsrep_provider=/usr/lib/galera/libgalera_smm.so +wsrep_provider_options="gcache.size=128M; gcache.page_size=10M" +## Galera Cluster configuration +wsrep_cluster_name="MSO-automated-tests-cluster" +wsrep_cluster_address="gcomm://" +#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3" +##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186" +## Galera Synchronization configuration +wsrep_sst_method=rsync +#wsrep_sst_method=xtrabackup-v2 +#wsrep_sst_auth="sstuser:Mon#2o!6" +## Galera Node configuration +wsrep_node_name="mariadb1" +##wsrep_node_address="192.169.3.184" +wsrep_on=OFF +## Status notification +#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify +####### + + +[mysqldump] +quick +max_allowed_packet = 16M + +[mysql] +no-auto-rehash +# Remove the next comment character if you are not familiar with SQL +#safe-updates + +[myisamchk] +key_buffer_size = 20971520 + +##[mysqlhotcopy] +##interactive-timeout +##[mysqld_safe] +##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1 +##log-error=//opt/app/mysql/log/mysqld.log diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql new file mode 100644 index 0000000000..1f153bce04 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql @@ -0,0 +1,257 @@ + + create table dictionary ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + dictionary_second_level integer, + dictionary_type varchar(255), + primary key (name) + ) engine=InnoDB; + + create table dictionary_elements ( + short_name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + description varchar(255) not null, + name varchar(255) not null, + subdictionary_name varchar(255), + type varchar(255) not null, + primary key (short_name) + ) engine=InnoDB; + + create table dictionary_to_dictionaryelements ( + dictionary_name varchar(255) not null, + dictionary_element_short_name varchar(255) not null, + primary key (dictionary_name, dictionary_element_short_name) + ) engine=InnoDB; + + create table hibernate_sequence ( + next_val bigint + ) engine=InnoDB; + + insert into hibernate_sequence values ( 1 ); + + create table loop_element_models ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + blueprint_yaml MEDIUMTEXT, + dcae_blueprint_id varchar(255), + loop_element_type varchar(255) not null, + short_name varchar(255), + primary key (name) + ) engine=InnoDB; + + create table loop_logs ( + id bigint not null, + log_component varchar(255) not null, + log_instant datetime(6) not null, + log_type varchar(255) not null, + message MEDIUMTEXT not null, + loop_id varchar(255) not null, + primary key (id) + ) engine=InnoDB; + + create table loop_templates ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + allowed_loop_type varchar(255), + blueprint_yaml MEDIUMTEXT, + dcae_blueprint_id varchar(255), + maximum_instances_allowed integer, + svg_representation MEDIUMTEXT, + unique_blueprint boolean default false, + service_uuid varchar(255), + primary key (name) + ) engine=InnoDB; + + create table loopelementmodels_to_policymodels ( + loop_element_name varchar(255) not null, + policy_model_type varchar(255) not null, + policy_model_version varchar(255) not null, + primary key (loop_element_name, policy_model_type, policy_model_version) + ) engine=InnoDB; + + create table loops ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + dcae_deployment_id varchar(255), + dcae_deployment_status_url varchar(255), + global_properties_json json, + last_computed_state varchar(255) not null, + svg_representation MEDIUMTEXT, + loop_template_name varchar(255) not null, + service_uuid varchar(255), + primary key (name) + ) engine=InnoDB; + + create table loops_to_microservicepolicies ( + loop_name varchar(255) not null, + microservicepolicy_name varchar(255) not null, + primary key (loop_name, microservicepolicy_name) + ) engine=InnoDB; + + create table looptemplates_to_loopelementmodels ( + loop_element_model_name varchar(255) not null, + loop_template_name varchar(255) not null, + flow_order integer not null, + primary key (loop_element_model_name, loop_template_name) + ) engine=InnoDB; + + create table micro_service_policies ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + configurations_json json, + json_representation json not null, + pdp_group varchar(255), + pdp_sub_group varchar(255), + context varchar(255), + dcae_blueprint_id varchar(255), + dcae_deployment_id varchar(255), + dcae_deployment_status_url varchar(255), + device_type_scope varchar(255), + shared bit not null, + loop_element_model_id varchar(255), + policy_model_type varchar(255), + policy_model_version varchar(255), + primary key (name) + ) engine=InnoDB; + + create table operational_policies ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + configurations_json json, + json_representation json not null, + pdp_group varchar(255), + pdp_sub_group varchar(255), + loop_element_model_id varchar(255), + policy_model_type varchar(255), + policy_model_version varchar(255), + loop_id varchar(255) not null, + primary key (name) + ) engine=InnoDB; + + create table policy_models ( + policy_model_type varchar(255) not null, + version varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + policy_acronym varchar(255), + policy_tosca MEDIUMTEXT, + policy_pdp_group json, + primary key (policy_model_type, version) + ) engine=InnoDB; + + create table services ( + service_uuid varchar(255) not null, + name varchar(255) not null, + resource_details json, + service_details json, + version varchar(255), + primary key (service_uuid) + ) engine=InnoDB; + + alter table dictionary_to_dictionaryelements + add constraint FK68hjjinnm8nte2owstd0xwp23 + foreign key (dictionary_element_short_name) + references dictionary_elements (short_name); + + alter table dictionary_to_dictionaryelements + add constraint FKtqfxg46gsxwlm2gkl6ne3cxfe + foreign key (dictionary_name) + references dictionary (name); + + alter table loop_logs + add constraint FK1j0cda46aickcaoxqoo34khg2 + foreign key (loop_id) + references loops (name); + + alter table loop_templates + add constraint FKn692dk6281wvp1o95074uacn6 + foreign key (service_uuid) + references services (service_uuid); + + alter table loopelementmodels_to_policymodels + add constraint FK23j2q74v6kaexefy0tdabsnda + foreign key (policy_model_type, policy_model_version) + references policy_models (policy_model_type, version); + + alter table loopelementmodels_to_policymodels + add constraint FKjag1iu0olojfwryfkvb5o0rk5 + foreign key (loop_element_name) + references loop_element_models (name); + + alter table loops + add constraint FK844uwy82wt0l66jljkjqembpj + foreign key (loop_template_name) + references loop_templates (name); + + alter table loops + add constraint FK4b9wnqopxogwek014i1shqw7w + foreign key (service_uuid) + references services (service_uuid); + + alter table loops_to_microservicepolicies + add constraint FKle255jmi7b065fwbvmwbiehtb + foreign key (microservicepolicy_name) + references micro_service_policies (name); + + alter table loops_to_microservicepolicies + add constraint FK8avfqaf7xl71l7sn7a5eri68d + foreign key (loop_name) + references loops (name); + + alter table looptemplates_to_loopelementmodels + add constraint FK1k7nbrbugvqa0xfxkq3cj1yn9 + foreign key (loop_element_model_name) + references loop_element_models (name); + + alter table looptemplates_to_loopelementmodels + add constraint FKj29yxyw0x7ue6mwgi6d3qg748 + foreign key (loop_template_name) + references loop_templates (name); + + alter table micro_service_policies + add constraint FKqvvdypacbww07fuv8xvlvdjgl + foreign key (loop_element_model_id) + references loop_element_models (name); + + alter table micro_service_policies + add constraint FKn17j9ufmyhqicb6cvr1dbjvkt + foreign key (policy_model_type, policy_model_version) + references policy_models (policy_model_type, version); + + alter table operational_policies + add constraint FKi9kh7my40737xeuaye9xwbnko + foreign key (loop_element_model_id) + references loop_element_models (name); + + alter table operational_policies + add constraint FKlsyhfkoqvkwj78ofepxhoctip + foreign key (policy_model_type, policy_model_version) + references policy_models (policy_model_type, version); + + alter table operational_policies + add constraint FK1ddoggk9ni2bnqighv6ecmuwu + foreign key (loop_id) + references loops (name); diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt new file mode 100644 index 0000000000..1103affff1 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt @@ -0,0 +1,32 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml new file mode 100644 index 0000000000..b8a774acbe --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml @@ -0,0 +1,57 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +#{{ if not .Values.disableClampClampMariadb }} +apiVersion: v1 +kind: ConfigMap +metadata: + name: clamp-entrypoint-bulkload-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: clamp-mariadb-conf-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/init/*").AsConfig . | indent 2 }} +#{{ end }} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml new file mode 100644 index 0000000000..8ddf584988 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml @@ -0,0 +1,113 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + containers: + - name: {{ include "common.name" . }} + image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.image }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: MYSQL_USER + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }} + - name: MYSQL_PASSWORD + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }} + - name: MYSQL_ROOT_PASSWORD + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 12 }} + - name: MYSQL_DATABASE + value: {{ tpl .Values.db.databaseName .}} + volumeMounts: + - mountPath: /docker-entrypoint.sh + subPath: docker-entrypoint.sh + name: init-script + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /docker-entrypoint-initdb.d/ + name: docker-entrypoint-bulkload + - mountPath: /etc/mysql/conf.d/conf1/ + name: clamp-mariadb-conf + - mountPath: /var/lib/mysql + name: clamp-mariadb-data + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + {{- if .Values.persistence.enabled }} + - name: clamp-mariadb-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + {{- else }} + emptyDir: {} + {{- end }} + - name: docker-entrypoint-bulkload + configMap: + name: clamp-entrypoint-bulkload-configmap + - name: clamp-mariadb-conf + configMap: + name: clamp-mariadb-conf-configmap + - name: localtime + hostPath: + path: /etc/localtime + - name: init-script + configMap: + name: {{ include "common.fullname" . }} + defaultMode: 0755 + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml new file mode 100644 index 0000000000..424987936d --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml @@ -0,0 +1,41 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +{{- if eq "True" (include "common.needPV" .) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-data + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: "{{ include "common.fullname" . }}-data" + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml new file mode 100644 index 0000000000..6856c80540 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml @@ -0,0 +1,40 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} + storageClassName: {{ include "common.storageClass" . }} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml new file mode 100644 index 0000000000..4cf8155f6c --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml @@ -0,0 +1,18 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{ include "common.secretFast" . }} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml new file mode 100644 index 0000000000..20a5065503 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml @@ -0,0 +1,41 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + {{- end}} + name: {{ .Values.service.portName }} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-mariadb/values.yaml b/kubernetes/clamp/components/clamp-mariadb/values.yaml new file mode 100644 index 0000000000..60b2cfef4f --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/values.yaml @@ -0,0 +1,130 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018-2019 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: # global defaults + nodePortPrefix: 302 + + persistence: {} +# application image +image: mariadb:10.5.4 +pullPolicy: Always +flavor: small +################################################################# +# Secrets metaconfig +################################################################# +secrets: + - uid: db-root-pass + type: password + externalSecret: '{{ tpl (default "" .Values.db.rootCredsExternalSecret) . }}' + password: '{{ .Values.db.rootPass }}' + - uid: db-secret + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}' + login: '{{ .Values.db.user }}' + password: '{{ .Values.db.password }}' + +# Application configuration +# dummy value db user pasword to pass lint!!! +db: + user: dummy-clds + password: dummy-sidnnd83K + databaseName: dummy-cldsdb4 + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 30 + periodSeconds: 10 + timeoutSeconds: 3 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 30 + periodSeconds: 10 + timeoutSeconds: 3 + +## Persist data to a persitent volume +persistence: + enabled: true + + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + ## + # storageClass: "-" + accessMode: ReadWriteOnce + size: 2Gi + mountPath: /dockerdata-nfs + mountSubPath: clamp/mariadb/data + +service: + type: ClusterIP + name: clampdb + portName: clampdb + internalPort: 3306 + externalPort: 3306 + + +ingress: + enabled: false + + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + large: + limits: + cpu: 1 + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + unlimited: {} |