diff options
Diffstat (limited to 'kubernetes/clamp/components/clamp-mariadb')
14 files changed, 1194 insertions, 0 deletions
diff --git a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml new file mode 100644 index 0000000000..91984c1014 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: MariaDB Service +name: clamp-mariadb +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt new file mode 100644 index 0000000000..1103affff1 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt @@ -0,0 +1,32 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml new file mode 100644 index 0000000000..9b96d0cfc4 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml @@ -0,0 +1,18 @@ +# Copyright © 2020 Samsung Electronics +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~6.x-0 + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh new file mode 100755 index 0000000000..71f32e2eff --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh @@ -0,0 +1,198 @@ +#!/bin/bash +set -eo pipefail +shopt -s nullglob + +# if command starts with an option, prepend mysqld +if [ "${1:0:1}" = '-' ]; then + set -- mysqld "$@" +fi + +# skip setup if they want an option that stops mysqld +wantHelp= +for arg; do + case "$arg" in + -'?'|--help|--print-defaults|-V|--version) + wantHelp=1 + break + ;; + esac +done + +prepare_password() +{ + echo "$1" | sed -e "s/'/\\\\'/g; s/\"/\\\\\"/g" +} + +# usage: file_env VAR [DEFAULT] +# ie: file_env 'XYZ_DB_PASSWORD' 'example' +# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of +# "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature) +file_env() { + local var="$1" + local fileVar="${var}_FILE" + local def="${2:-}" + if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then + echo >&2 "error: both $var and $fileVar are set (but are exclusive)" + exit 1 + fi + local val="$def" + if [ "${!var:-}" ]; then + val="${!var}" + elif [ "${!fileVar:-}" ]; then + val="$(< "${!fileVar}")" + fi + val=`prepare_password $val` + export "$var"="$val" + unset "$fileVar" +} + +_check_config() { + toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" ) + if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then + cat >&2 <<-EOM + + ERROR: mysqld failed while attempting to check config + command was: "${toRun[*]}" + + $errors + EOM + exit 1 + fi +} + +# Fetch value from server config +# We use mysqld --verbose --help instead of my_print_defaults because the +# latter only show values present in config files, and not server defaults +_get_config() { + local conf="$1"; shift + "$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \ + | awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }' + # match "datadir /some/path with/spaces in/it here" but not "--xyz=abc\n datadir (xyz)" +} + +# allow the container to be started with `--user` +if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then + _check_config "$@" + DATADIR="$(_get_config 'datadir' "$@")" + mkdir -p "$DATADIR" + find "$DATADIR" \! -user mysql -exec chown mysql '{}' + + exec gosu mysql "$BASH_SOURCE" "$@" +fi + +if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then + # still need to check config, container may have started with --user + _check_config "$@" + # Get config + DATADIR="$(_get_config 'datadir' "$@")" + + if [ ! -d "$DATADIR/mysql" ]; then + file_env 'MYSQL_ROOT_PASSWORD' + if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + echo >&2 'error: database is uninitialized and password option is not specified ' + echo >&2 ' You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD' + exit 1 + fi + + mkdir -p "$DATADIR" + + echo 'Initializing database' + # "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here) + mysql_install_db --datadir="$DATADIR" --rpm "${@:2}" + echo 'Database initialized' + + SOCKET="$(_get_config 'socket' "$@")" + "$@" --skip-networking --socket="${SOCKET}" & + pid="$!" + + mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" ) + + for i in {30..0}; do + if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then + break + fi + echo 'MySQL init process in progress...' + sleep 1 + done + if [ "$i" = 0 ]; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then + # sed is for https://bugs.mysql.com/bug.php?id=20545 + mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql + fi + + if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)" + echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD" + fi + + rootCreate= + # default root to listen for connections from anywhere + file_env 'MYSQL_ROOT_HOST' '%' + if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then + # no, we don't care if read finds a terminating character in this heredoc + # https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151 + read -r -d '' rootCreate <<-EOSQL || true + CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ; + GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ; + EOSQL + fi + + "${mysql[@]}" <<-EOSQL + -- What's done in this file shouldn't be replicated + -- or products like mysql-fabric won't work + SET @@SESSION.SQL_LOG_BIN=0; + + DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ; + SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ; + GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ; + ${rootCreate} + DROP DATABASE IF EXISTS test ; + FLUSH PRIVILEGES ; + EOSQL + + if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then + mysql+=( -p"${MYSQL_ROOT_PASSWORD}" ) + fi + + file_env 'MYSQL_DATABASE' + if [ "$MYSQL_DATABASE" ]; then + echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}" + mysql+=( "$MYSQL_DATABASE" ) + fi + + file_env 'MYSQL_USER' + file_env 'MYSQL_PASSWORD' + if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then + echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}" + + if [ "$MYSQL_DATABASE" ]; then + echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}" + fi + fi + + echo + for f in /docker-entrypoint-initdb.d/*; do + case "$f" in + *.sh) echo "$0: running $f"; . "$f" ;; + *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; + *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; + *) echo "$0: ignoring $f" ;; + esac + echo + done + + if ! kill -s TERM "$pid" || ! wait "$pid"; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + echo + echo 'MySQL init process done. Ready for start up.' + echo + fi +fi + +exec "$@" diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf new file mode 100644 index 0000000000..612590cc6b --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf @@ -0,0 +1,207 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# Example MySQL config file for medium systems. +# +# This is for a system with memory 8G where MySQL plays +# an important part, or systems up to 128M where MySQL is used together with +# other programs (such as a web server) +# +# In this file, you can use all long options that a program supports. +# If you want to know which options a program supports, run the program +# with the "--help" option. + +# The following options will be passed to all MySQL clients +##[client] +##user = root +##port = 3306 +##socket = //opt/app/mysql/mysql.sock + +# Here follows entries for some specific programs + +# The MySQL server +[mysqld] +##performance_schema + +slow_query_log =ON +long_query_time =2 +slow_query_log_file =//var/lib/mysql/slow_query.log +##basedir = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64 +##datadir = //opt/app/mysql/data +##port = 3306 +##socket = //opt/app/mysql/mysql.sock +skip-external-locking +explicit_defaults_for_timestamp = true +skip-symbolic-links +local-infile = 0 +#ignore_db_dir=lost+found +key_buffer_size = 16M +max_allowed_packet = 4M +table_open_cache = 100 +sort_buffer_size = 512K +net_buffer_length = 8K +read_buffer_size = 256K +read_rnd_buffer_size = 512K +myisam_sort_buffer_size = 8M +max_connections = 500 +lower_case_table_names = 1 +thread_stack = 256K +thread_cache_size = 25 +query_cache_size = 8M +query_cache_type = 0 +query_prealloc_size = 512K +query_cache_limit = 1M + +# Password validation +##plugin-load-add=simple_password_check.so +##simple_password_check_other_characters=0 + +# Audit Log settings +plugin-load-add=server_audit.so +server_audit=FORCE_PLUS_PERMANENT +server_audit_file_path=//var/lib/mysql/audit.log +server_audit_file_rotate_size=50M +server_audit_events=CONNECT,QUERY,TABLE +server_audit_logging=on + +# Don't listen on a TCP/IP port at all. This can be a security enhancement, +# if all processes that need to connect to mysqld run on the same host. +# All interaction with mysqld must be made via Unix sockets or named pipes. +# Note that using this option without enabling named pipes on Windows +# (via the "enable-named-pipe" option) will render mysqld useless! +# +#skip-networking + +# Replication Master Server (default) +# binary logging is required for replication +##log-bin=//var/lib/mysql/mysql-bin + +# binary logging format - mixed recommended +binlog_format=row + +# required unique id between 1 and 2^32 - 1 +# defaults to 1 if master-host is not set +# but will not function as a master if omitted + +# Replication Slave (comment out master section to use this) +# +# To configure this host as a replication slave, you can choose between +# two methods : +# +# 1) Use the CHANGE MASTER TO command (fully described in our manual) - +# the syntax is: +# +# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, +# MASTER_USER=<user>, MASTER_PASSWORD=<password> ; +# +# where you replace <host>, <user>, <password> by quoted strings and +# <port> by the master's port number (3306 by default). +# +# Example: +# +# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, +# MASTER_USER='joe', MASTER_PASSWORD='secret'; +# +# OR +# +# 2) Set the variables below. However, in case you choose this method, then +# start replication for the first time (even unsuccessfully, for example +# if you mistyped the password in master-password and the slave fails to +# connect), the slave will create a master.info file, and any later +# change in this file to the variables' values below will be ignored and +# overridden by the content of the master.info file, unless you shutdown +# the slave server, delete master.info and restart the slaver server. +# For that reason, you may want to leave the lines below untouched +# (commented) and instead use CHANGE MASTER TO (see above) +# +# required unique id between 2 and 2^32 - 1 +# (and different from the master) +# defaults to 2 if master-host is set +# but will not function as a slave if omitted +#server-id = 2 +# +# The replication master for this slave - required +#master-host = <hostname> +# +# The username the slave will use for authentication when connecting +# to the master - required +#master-user = <username> +# +# The password the slave will authenticate with when connecting to +# the master - required +#master-password = <password> +# +# The port the master is listening on. +# optional - defaults to 3306 +#master-port = <port> +# +# binary logging - not required for slaves, but recommended +#log-bin=mysql-bin + +# Uncomment the following if you are using InnoDB tables +##innodb_data_home_dir = //opt/app/mysql/data +##innodb_data_file_path = ibdata1:20M:autoextend:max:32G +##innodb_log_group_home_dir = //opt/app/mysql/iblogs +# You can set .._buffer_pool_size up to 50 - 80 % +# of RAM but beware of setting memory usage too high +innodb_buffer_pool_size = 128M +#innodb_additional_mem_pool_size = 2M +# Set .._log_file_size to 25 % of buffer pool size +innodb_log_file_size = 10M +innodb_log_files_in_group = 3 +innodb_log_buffer_size = 8M +#innodb_flush_log_at_trx_commit = 1 +innodb_lock_wait_timeout = 50 +innodb_autoextend_increment = 100 +expire_logs_days = 8 +open_files_limit = 2000 +transaction-isolation=READ-COMMITTED +####### Galera parameters ####### +## Galera Provider configuration +wsrep_provider=/usr/lib/galera/libgalera_smm.so +wsrep_provider_options="gcache.size=128M; gcache.page_size=10M" +## Galera Cluster configuration +wsrep_cluster_name="MSO-automated-tests-cluster" +wsrep_cluster_address="gcomm://" +#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3" +##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186" +## Galera Synchronization configuration +wsrep_sst_method=rsync +#wsrep_sst_method=xtrabackup-v2 +#wsrep_sst_auth="sstuser:Mon#2o!6" +## Galera Node configuration +wsrep_node_name="mariadb1" +##wsrep_node_address="192.169.3.184" +wsrep_on=OFF +## Status notification +#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify +####### + + +[mysqldump] +quick +max_allowed_packet = 16M + +[mysql] +no-auto-rehash +# Remove the next comment character if you are not familiar with SQL +#safe-updates + +[myisamchk] +key_buffer_size = 20971520 + +##[mysqlhotcopy] +##interactive-timeout +##[mysqld_safe] +##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1 +##log-error=//opt/app/mysql/log/mysqld.log diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql new file mode 100644 index 0000000000..1f153bce04 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql @@ -0,0 +1,257 @@ + + create table dictionary ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + dictionary_second_level integer, + dictionary_type varchar(255), + primary key (name) + ) engine=InnoDB; + + create table dictionary_elements ( + short_name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + description varchar(255) not null, + name varchar(255) not null, + subdictionary_name varchar(255), + type varchar(255) not null, + primary key (short_name) + ) engine=InnoDB; + + create table dictionary_to_dictionaryelements ( + dictionary_name varchar(255) not null, + dictionary_element_short_name varchar(255) not null, + primary key (dictionary_name, dictionary_element_short_name) + ) engine=InnoDB; + + create table hibernate_sequence ( + next_val bigint + ) engine=InnoDB; + + insert into hibernate_sequence values ( 1 ); + + create table loop_element_models ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + blueprint_yaml MEDIUMTEXT, + dcae_blueprint_id varchar(255), + loop_element_type varchar(255) not null, + short_name varchar(255), + primary key (name) + ) engine=InnoDB; + + create table loop_logs ( + id bigint not null, + log_component varchar(255) not null, + log_instant datetime(6) not null, + log_type varchar(255) not null, + message MEDIUMTEXT not null, + loop_id varchar(255) not null, + primary key (id) + ) engine=InnoDB; + + create table loop_templates ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + allowed_loop_type varchar(255), + blueprint_yaml MEDIUMTEXT, + dcae_blueprint_id varchar(255), + maximum_instances_allowed integer, + svg_representation MEDIUMTEXT, + unique_blueprint boolean default false, + service_uuid varchar(255), + primary key (name) + ) engine=InnoDB; + + create table loopelementmodels_to_policymodels ( + loop_element_name varchar(255) not null, + policy_model_type varchar(255) not null, + policy_model_version varchar(255) not null, + primary key (loop_element_name, policy_model_type, policy_model_version) + ) engine=InnoDB; + + create table loops ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + dcae_deployment_id varchar(255), + dcae_deployment_status_url varchar(255), + global_properties_json json, + last_computed_state varchar(255) not null, + svg_representation MEDIUMTEXT, + loop_template_name varchar(255) not null, + service_uuid varchar(255), + primary key (name) + ) engine=InnoDB; + + create table loops_to_microservicepolicies ( + loop_name varchar(255) not null, + microservicepolicy_name varchar(255) not null, + primary key (loop_name, microservicepolicy_name) + ) engine=InnoDB; + + create table looptemplates_to_loopelementmodels ( + loop_element_model_name varchar(255) not null, + loop_template_name varchar(255) not null, + flow_order integer not null, + primary key (loop_element_model_name, loop_template_name) + ) engine=InnoDB; + + create table micro_service_policies ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + configurations_json json, + json_representation json not null, + pdp_group varchar(255), + pdp_sub_group varchar(255), + context varchar(255), + dcae_blueprint_id varchar(255), + dcae_deployment_id varchar(255), + dcae_deployment_status_url varchar(255), + device_type_scope varchar(255), + shared bit not null, + loop_element_model_id varchar(255), + policy_model_type varchar(255), + policy_model_version varchar(255), + primary key (name) + ) engine=InnoDB; + + create table operational_policies ( + name varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + configurations_json json, + json_representation json not null, + pdp_group varchar(255), + pdp_sub_group varchar(255), + loop_element_model_id varchar(255), + policy_model_type varchar(255), + policy_model_version varchar(255), + loop_id varchar(255) not null, + primary key (name) + ) engine=InnoDB; + + create table policy_models ( + policy_model_type varchar(255) not null, + version varchar(255) not null, + created_by varchar(255), + created_timestamp datetime(6) not null, + updated_by varchar(255), + updated_timestamp datetime(6) not null, + policy_acronym varchar(255), + policy_tosca MEDIUMTEXT, + policy_pdp_group json, + primary key (policy_model_type, version) + ) engine=InnoDB; + + create table services ( + service_uuid varchar(255) not null, + name varchar(255) not null, + resource_details json, + service_details json, + version varchar(255), + primary key (service_uuid) + ) engine=InnoDB; + + alter table dictionary_to_dictionaryelements + add constraint FK68hjjinnm8nte2owstd0xwp23 + foreign key (dictionary_element_short_name) + references dictionary_elements (short_name); + + alter table dictionary_to_dictionaryelements + add constraint FKtqfxg46gsxwlm2gkl6ne3cxfe + foreign key (dictionary_name) + references dictionary (name); + + alter table loop_logs + add constraint FK1j0cda46aickcaoxqoo34khg2 + foreign key (loop_id) + references loops (name); + + alter table loop_templates + add constraint FKn692dk6281wvp1o95074uacn6 + foreign key (service_uuid) + references services (service_uuid); + + alter table loopelementmodels_to_policymodels + add constraint FK23j2q74v6kaexefy0tdabsnda + foreign key (policy_model_type, policy_model_version) + references policy_models (policy_model_type, version); + + alter table loopelementmodels_to_policymodels + add constraint FKjag1iu0olojfwryfkvb5o0rk5 + foreign key (loop_element_name) + references loop_element_models (name); + + alter table loops + add constraint FK844uwy82wt0l66jljkjqembpj + foreign key (loop_template_name) + references loop_templates (name); + + alter table loops + add constraint FK4b9wnqopxogwek014i1shqw7w + foreign key (service_uuid) + references services (service_uuid); + + alter table loops_to_microservicepolicies + add constraint FKle255jmi7b065fwbvmwbiehtb + foreign key (microservicepolicy_name) + references micro_service_policies (name); + + alter table loops_to_microservicepolicies + add constraint FK8avfqaf7xl71l7sn7a5eri68d + foreign key (loop_name) + references loops (name); + + alter table looptemplates_to_loopelementmodels + add constraint FK1k7nbrbugvqa0xfxkq3cj1yn9 + foreign key (loop_element_model_name) + references loop_element_models (name); + + alter table looptemplates_to_loopelementmodels + add constraint FKj29yxyw0x7ue6mwgi6d3qg748 + foreign key (loop_template_name) + references loop_templates (name); + + alter table micro_service_policies + add constraint FKqvvdypacbww07fuv8xvlvdjgl + foreign key (loop_element_model_id) + references loop_element_models (name); + + alter table micro_service_policies + add constraint FKn17j9ufmyhqicb6cvr1dbjvkt + foreign key (policy_model_type, policy_model_version) + references policy_models (policy_model_type, version); + + alter table operational_policies + add constraint FKi9kh7my40737xeuaye9xwbnko + foreign key (loop_element_model_id) + references loop_element_models (name); + + alter table operational_policies + add constraint FKlsyhfkoqvkwj78ofepxhoctip + foreign key (policy_model_type, policy_model_version) + references policy_models (policy_model_type, version); + + alter table operational_policies + add constraint FK1ddoggk9ni2bnqighv6ecmuwu + foreign key (loop_id) + references loops (name); diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt new file mode 100644 index 0000000000..1103affff1 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt @@ -0,0 +1,32 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml new file mode 100644 index 0000000000..01420aa97b --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml @@ -0,0 +1,55 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +#{{ if not .Values.disableClampClampMariadb }} +apiVersion: v1 +kind: ConfigMap +metadata: + name: clamp-entrypoint-bulkload-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: clamp-mariadb-conf-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/init/*").AsConfig . | indent 2 }} +#{{ end }} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml new file mode 100644 index 0000000000..7d6e162813 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml @@ -0,0 +1,111 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: MYSQL_USER + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }} + - name: MYSQL_PASSWORD + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }} + - name: MYSQL_ROOT_PASSWORD + {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 12 }} + - name: MYSQL_DATABASE + value: {{ tpl .Values.db.databaseName .}} + volumeMounts: + - mountPath: /docker-entrypoint.sh + subPath: docker-entrypoint.sh + name: init-script + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /docker-entrypoint-initdb.d/ + name: docker-entrypoint-bulkload + - mountPath: /etc/mysql/conf.d/conf1/ + name: clamp-mariadb-conf + - mountPath: /var/lib/mysql + name: clamp-mariadb-data + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + {{- if .Values.persistence.enabled }} + - name: clamp-mariadb-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + {{- else }} + emptyDir: {} + {{- end }} + - name: docker-entrypoint-bulkload + configMap: + name: clamp-entrypoint-bulkload-configmap + - name: clamp-mariadb-conf + configMap: + name: clamp-mariadb-conf-configmap + - name: localtime + hostPath: + path: /etc/localtime + - name: init-script + configMap: + name: {{ include "common.fullname" . }} + defaultMode: 0755 + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml new file mode 100644 index 0000000000..424987936d --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml @@ -0,0 +1,41 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +{{- if eq "True" (include "common.needPV" .) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-data + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: "{{ include "common.fullname" . }}-data" + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml new file mode 100644 index 0000000000..6856c80540 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml @@ -0,0 +1,40 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} + storageClassName: {{ include "common.storageClass" . }} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml new file mode 100644 index 0000000000..57f88ce32d --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml @@ -0,0 +1,16 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +{{ include "common.secretFast" . }} diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml new file mode 100644 index 0000000000..2533c26161 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml @@ -0,0 +1,39 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + {{- end}} + name: {{ .Values.service.portName }} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-mariadb/values.yaml b/kubernetes/clamp/components/clamp-mariadb/values.yaml new file mode 100644 index 0000000000..492145ae07 --- /dev/null +++ b/kubernetes/clamp/components/clamp-mariadb/values.yaml @@ -0,0 +1,129 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018-2019 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: # global defaults + nodePortPrefix: 302 + + persistence: {} +# application image +repository: docker.io +image: mariadb:10.5.4 +pullPolicy: Always +flavor: small +################################################################# +# Secrets metaconfig +################################################################# +secrets: + - uid: db-root-pass + type: password + externalSecret: '{{ tpl (default "" .Values.db.rootCredsExternalSecret) . }}' + password: '{{ .Values.db.rootPass }}' + - uid: db-secret + type: basicAuth + externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}' + login: '{{ .Values.db.user }}' + password: '{{ .Values.db.password }}' + +# Application configuration +# dummy value db user pasword to pass lint!!! +db: + user: dummy-clds + password: dummy-sidnnd83K + databaseName: dummy-cldsdb4 + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +## Persist data to a persitent volume +persistence: + enabled: true + + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + ## + # storageClass: "-" + accessMode: ReadWriteOnce + size: 2Gi + mountPath: /dockerdata-nfs + mountSubPath: clamp/mariadb/data + +service: + type: ClusterIP + name: clampdb + portName: clampdb + internalPort: 3306 + externalPort: 3306 + + +ingress: + enabled: false + + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + large: + limits: + cpu: 1 + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + unlimited: {} |