diff options
Diffstat (limited to 'kubernetes/clamp/components/clamp-dash-es')
9 files changed, 594 insertions, 0 deletions
diff --git a/kubernetes/clamp/components/clamp-dash-es/Chart.yaml b/kubernetes/clamp/components/clamp-dash-es/Chart.yaml new file mode 100644 index 0000000000..b2f8624a4b --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Clamp Dashboard Elasticsearch +name: clamp-dash-es +version: 6.0.0 diff --git a/kubernetes/clamp/components/clamp-dash-es/requirements.yaml b/kubernetes/clamp/components/clamp-dash-es/requirements.yaml new file mode 100644 index 0000000000..caff1e5dc4 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/requirements.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~6.x-0 + repository: '@local' diff --git a/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml b/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml new file mode 100644 index 0000000000..1eb20fce89 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml @@ -0,0 +1,128 @@ +--- +# Copyright © 2020 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ======================== Elasticsearch Configuration ========================= +# +# NOTE: Elasticsearch comes with reasonable defaults for most settings. +# Before you set out to tweak and tune the configuration, make sure you +# understand what are you trying to accomplish and the consequences. +# +# The primary way of configuring a node is via this file. This template lists +# the most important settings you may want to configure for a production cluster. +# +# Please consult the documentation for further information on configuration options: +# https://www.elastic.co/guide/en/elasticsearch/reference/index.html +# +# ---------------------------------- Cluster ----------------------------------- +# +# Name of the Elasticsearch cluster. +# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster. +# The default name is elasticsearch, but you should change it to an appropriate name which describes the +# purpose of the cluster. +# +## Default Elasticsearch configuration from elasticsearch-docker. +## from https://opendistro.github.io/for-elasticsearch-docs/docs/elasticsearch/configuration/ +# + +cluster.name: "clamp-dashboard" +node.name: "cldash-es-node1" +# ---------------------------------- Network ----------------------------------- +# +# Set the bind address to a specific IP (IPv4 or IPv6): +# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a +# non-loopback address. +network.host: 0.0.0.0 +# +# Set a custom port for HTTP: If required, default is 9200-9300 +# +#http.port: $http.port +# +# For more information, consult the network module documentation. +# ----------------------------------- Paths ------------------------------------ +# +# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma. +# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure +# may change & can deal to data loss. +path.data: /usr/share/elasticsearch/data +# +# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs", +# as on upgrading Elasticsearch, directory structure may change. +path.logs: /usr/share/elasticsearch/logs +# +# ----------------------------------- Memory ----------------------------------- +# +# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk. +# Lock the memory on startup. +# +bootstrap.memory_lock: false +# +# Make sure that the heap size is set to about half the memory available +# on the system and that the owner of the process is allowed to use this +# limit. +# +# Elasticsearch performs poorly when the system is swapping the memory. +# +# --------------------------------- Discovery ---------------------------------- +# +# Pass an initial list of hosts to perform discovery when new node is started +# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster +# that are likely to be live and contactable. +# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try +# to connect to other nodes running on the same server. +# # minimum_master_nodes need to be explicitly set when bound on a public IP +# # set to 1 to allow single node clusters +# # Details: https://github.com/elastic/elasticsearch/pull/17288 +discovery.zen.minimum_master_nodes: 1 +discovery.seed_hosts: [] +# # Breaking change in 7.0 +# # https://www.elastic.co/guide/en/elasticsearch/reference/7.0/breaking-changes-7.0.html#breaking_70_discovery_changes +cluster.initial_master_nodes: + - cldash-es-node1 +# - docker-test-node-1 +# ---------------------------------- Various ----------------------------------- +# +# Require explicit names when deleting indices: +# +#action.destructive_requires_name: true +# Set a custom port for HTTP: If required, default is 9200-9300 +# This is used for REST APIs +http.port: {{.Values.service.externalPort}} +# Port to bind for communication between nodes. Accepts a single value or a range. +# If a range is specified, the node will bind to the first available port in the range. +# Defaults to 9300-9400. +# More info: +transport.tcp.port: {{.Values.service.externalPort2}} + +######## Start OpenDistro for Elasticsearch Security Demo Configuration ######## +# WARNING: revise all the lines below before you go into production +opendistro_security.ssl.transport.pemcert_filepath: esnode.pem +opendistro_security.ssl.transport.pemkey_filepath: esnode-key.pem +opendistro_security.ssl.transport.pemtrustedcas_filepath: root-ca.pem +opendistro_security.ssl.transport.enforce_hostname_verification: false +opendistro_security.ssl.http.enabled: {{.Values.security.ssl.enabled}} +opendistro_security.ssl.http.pemcert_filepath: esnode.pem +opendistro_security.ssl.http.pemkey_filepath: esnode-key.pem +opendistro_security.ssl.http.pemtrustedcas_filepath: root-ca.pem +opendistro_security.allow_unsafe_democertificates: true +opendistro_security.allow_default_init_securityindex: true +opendistro_security.authcz.admin_dn: + - CN=kirk,OU=client,O=client,L=test, C=de + +opendistro_security.audit.type: internal_elasticsearch +opendistro_security.enable_snapshot_restore_privilege: true +opendistro_security.check_snapshot_restore_write_privileges: true +opendistro_security.restapi.roles_enabled: ["all_access", "security_rest_api_access"] +cluster.routing.allocation.disk.threshold_enabled: false +node.max_local_storage_nodes: 3 +######## End OpenDistro for Elasticsearch Security Demo Configuration ######## diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml new file mode 100644 index 0000000000..20ff6f27c2 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml @@ -0,0 +1,27 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml new file mode 100644 index 0000000000..0ec38b08e3 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml @@ -0,0 +1,124 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: apps/v1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + selector: + matchLabels: + app: {{ include "common.name" . }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} + spec: + initContainers: + - command: + - /bin/sh + - -c + - | + sysctl -w vm.max_map_count=262144 + mkdir -p /usr/share/elasticsearch/logs + mkdir -p /usr/share/elasticsearch/data + chmod -R 777 /usr/share/elasticsearch + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + securityContext: + privileged: true + image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: init-sysctl + volumeMounts: + - name: {{ include "common.fullname" . }}-logs + mountPath: /usr/share/elasticsearch/logs/ + - name: {{ include "common.fullname" . }}-data + mountPath: /usr/share/elasticsearch/data/ + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + name: {{ include "common.servicename" . }} + - containerPort: {{ .Values.service.internalPort2 }} + name: {{ include "common.servicename" . }}2 +# disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + timeoutSeconds: {{ .Values.liveness.timeoutSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort2 }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + timeoutSeconds: {{ .Values.readiness.timeoutSeconds }} + env: + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml + name: {{ include "common.fullname" . }}-config + subPath: elasticsearch.yml + - mountPath: /usr/share/elasticsearch/data/ + name: {{ include "common.fullname" . }}-data + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: {{ include "common.fullname" . }}-config + configMap: + name: {{ include "common.fullname" . }}-configmap + items: + - key: elasticsearch.yml + path: elasticsearch.yml + - name: {{ include "common.fullname" . }}-data + persistentVolumeClaim: + claimName: {{ include "common.fullname" . }} + - name: {{ include "common.fullname" . }}-logs + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPathLogs }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml new file mode 100644 index 0000000000..3669621b24 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml @@ -0,0 +1,39 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +{{- if eq "True" (include "common.needPV" .) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }}-data + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: "{{ include "common.fullname" . }}-data" + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml new file mode 100644 index 0000000000..6ae4eea0d3 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml @@ -0,0 +1,38 @@ +{{/* +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} +{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ include "common.release" . }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + accessModes: + - {{ .Values.persistence.accessMode }} + storageClassName: {{ include "common.storageClass" . }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- end -}} diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml new file mode 100644 index 0000000000..292fc31dc3 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml @@ -0,0 +1,68 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} + annotations: +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.config.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.config.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} +--- +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }}-tcp + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ include "common.release" . }} + heritage: {{ .Release.Service }} + annotations: +spec: + type: {{ .Values.service.type2 }} + ports: + {{if eq .Values.service.type2 "NodePort" -}} + - port: {{ .Values.service.externalPort2 }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }} + name: {{ .Values.config.portName2 }} + {{- else -}} + - port: {{ .Values.service.externalPort2 }} + targetPort: {{ .Values.service.internalPort2 }} + name: {{ .Values.config.portName2 }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/components/clamp-dash-es/values.yaml b/kubernetes/clamp/components/clamp-dash-es/values.yaml new file mode 100644 index 0000000000..27158a6668 --- /dev/null +++ b/kubernetes/clamp/components/clamp-dash-es/values.yaml @@ -0,0 +1,132 @@ +# Copyright © 2020 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + persistence: {} +flavor: small + +################################################################# +# Application configuration defaults. +################################################################# + +# BusyBox image +busyboxRepository: registry.hub.docker.com +busyboxImage: library/busybox:latest + +# application image +repository: nexus3.onap.org:10001 +image: onap/clamp-dashboard-elasticsearch:5.0.3 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +# Example: +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 180 + periodSeconds: 30 + timeoutSeconds: 5 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 180 + periodSeconds: 30 + timeoutSeconds: 5 + +## Persist data to a persitent volume +persistence: + enabled: true + + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + accessMode: ReadWriteOnce + size: 4Gi + mountPath: /dockerdata-nfs + mountSubPath: clamp/dashboard-elasticsearch/data + mountSubPathLogs: clamp + +security: + ssl: + enabled: true + +service: + type: ClusterIP + name: cdash-es + portName: cdash-es-rest + externalPort: 9200 + internalPort: 9200 + type2: ClusterIP + portName2: cdash-es-tcp + externalPort2: 9300 + internalPort2: 9300 + +ingress: + enabled: false + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 4Gi + requests: + cpu: 10m + memory: 2.5Gi + large: + limits: + cpu: 1 + memory: 4Gi + requests: + cpu: 10m + memory: 2.5Gi + unlimited: {} |