diff options
Diffstat (limited to 'kubernetes/clamp/charts')
12 files changed, 801 insertions, 4 deletions
diff --git a/kubernetes/clamp/charts/clamp-backend/Chart.yaml b/kubernetes/clamp/charts/clamp-backend/Chart.yaml new file mode 100644 index 0000000000..a6aec46264 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/Chart.yaml @@ -0,0 +1,19 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP Clamp +name: clamp-backend +version: 5.0.0 diff --git a/kubernetes/clamp/charts/clamp-backend/requirements.yaml b/kubernetes/clamp/charts/clamp-backend/requirements.yaml new file mode 100644 index 0000000000..05d49a8d7b --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/requirements.yaml @@ -0,0 +1,22 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~5.x-0 + # local reference to common chart, as it is + # a part of this chart's package and will not + # be published independently to a repo (at this point) + repository: '@local' diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml new file mode 100644 index 0000000000..dab2e44f5e --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml @@ -0,0 +1,53 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml new file mode 100644 index 0000000000..551ed34ee4 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml @@ -0,0 +1,316 @@ +<?xml version = "1.0" encoding = "UTF-8" ?> +<!-- +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +--> +<included> + <jmxConfigurator /> + <!-- Example evaluator filter applied against console appender --> + <property + name="p_tim" + value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}" /> + <property + name="p_lvl" + value="%level" /> + <property + name="p_log" + value="%logger" /> + <property + name="p_mdc" + value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" /> + <property + name="p_msg" + value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" /> + <property + name="p_exc" + value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" /> + <property + name="p_mak" + value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" /> + <property + name="p_thr" + value="%thread" /> + <property + name="defaultPattern" + value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" /> + <property + name="debugPattern" + value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" /> + + <!-- Example evaluator filter applied against console appender --> + <appender + name="STDOUT" + class="ch.qos.logback.core.ConsoleAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + <level>INFO</level> + </filter> + <encoder> + <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n + </pattern> + </encoder> + </appender> + + <appender + name="ERROR" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + <level>INFO</level> + </filter> + <file>${logDirectory}/error.log</file> + <append>true</append> + <encoder> + <pattern>${defaultPattern}</pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy"> + <fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip + </fileNamePattern> + <maxFileSize>50MB</maxFileSize> + <maxHistory>30</maxHistory> + <totalSizeCap>10GB</totalSizeCap> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + + <appender + name="DEBUG" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/debug.log</file> + <append>true</append> + <encoder> + <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n + </pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy"> + <fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip + </fileNamePattern> + <maxFileSize>50MB</maxFileSize> + <maxHistory>30</maxHistory> + <totalSizeCap>10GB</totalSizeCap> + </rollingPolicy> + </appender> + + + <appender + name="AUDIT" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/audit.log</file> + <append>true</append> + <encoder> + <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n + </pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <maxIndex>10</maxIndex> + <FileNamePattern>${logDirectory}/audit.%i.log.zip + </FileNamePattern> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + <appender + name="asyncEELFAudit" + class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="AUDIT" /> + </appender> + + <appender + name="METRIC" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/metric.log</file> + <append>true</append> + <encoder> + <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| + %msg%n</pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <maxIndex>10</maxIndex> + <FileNamePattern>${logDirectory}/metric.%i.log.zip + </FileNamePattern> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + <appender + name="asyncEELFMetrics" + class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="METRIC" /> + </appender> + + <!-- SECURITY related loggers --> + <appender + name="SECURITY" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/security.log</file> + <append>true</append> + <encoder> + <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n + </pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <maxIndex>10</maxIndex> + <FileNamePattern>${logDirectory}/security.%i.log.zip + </FileNamePattern> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + <appender + name="asyncEELFSecurity" + class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="SECURITY" /> + </appender> + <!-- logback jms appenders & loggers definition starts here --> + <appender + name="auditLogs" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + </filter> + <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern> + </encoder> + </appender> + <appender + name="perfLogs" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + </filter> + <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern> + </encoder> + </appender> + + <logger + name="org.onap.aaf" + level="DEBUG"> + <appender-ref ref="DEBUG" /> + </logger> + <logger + name="org.apache" + level="DEBUG"> + <appender-ref ref="DEBUG" /> + </logger> + <!-- Spring related loggers --> + <logger + name="org.springframework" + level="DEBUG"> + <appender-ref ref="DEBUG" /> + </logger> + + <!-- CLDS related loggers --> + <logger + name="org.onap.clamp" + level="DEBUG"> + <appender-ref ref="ERROR" /> + <appender-ref ref="DEBUG" /> + </logger> + + <!-- CLDS related loggers --> + <logger + name="com.att.eelf.error" + level="OFF"> + <appender-ref ref="ERROR" /> + </logger> + <!-- EELF related loggers --> + <logger + name="com.att.eelf.audit" + level="INFO" + additivity="false"> + <appender-ref ref="asyncEELFAudit" /> + </logger> + <logger + name="com.att.eelf.metrics" + level="DEBUG" + additivity="false"> + <appender-ref ref="asyncEELFMetrics" /> + </logger> + <logger + name="com.att.eelf.security" + level="DEBUG" + additivity="false"> + <appender-ref ref="asyncEELFSecurity" /> + </logger> + + <!-- logback internals logging --> + <logger + name="ch.qos.logback.classic" + level="INFO" /> + <logger + name="ch.qos.logback.core" + level="INFO" /> + <logger + name="AuditRecord" + level="INFO" + additivity="false"> + <appender-ref ref="auditLogs" /> + </logger> + <logger + name="AuditRecord_DirectCall" + level="INFO" + additivity="false"> + <appender-ref ref="auditLogs" /> + </logger> + <logger + name="PerfTrackerRecord" + level="INFO" + additivity="false"> + <appender-ref ref="perfLogs" /> + </logger> + <!-- logback jms appenders & loggers definition ends here --> + + <root level="DEBUG"> + <appender-ref ref="DEBUG" /> + <appender-ref ref="STDOUT" /> + </root> +</included> diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json new file mode 100644 index 0000000000..3adda95c11 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json @@ -0,0 +1,18 @@ +{ + "sdc-connections":{ + "sdc-controller":{ + "user": "clamp", + "consumerGroup": "clamp", + "consumerId": "clamp", + "environmentName": "AUTO", + "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443", + "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981", + "pollingInterval":30, + "pollingTimeout":30, + "activateServerTLSAuth":"false", + "keyStorePassword":"", + "keyStorePath":"", + "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"] + } + } +} diff --git a/kubernetes/clamp/charts/clamp-backend/templates/NOTES.txt b/kubernetes/clamp/charts/clamp-backend/templates/NOTES.txt new file mode 100644 index 0000000000..e36d6a5bfb --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/templates/NOTES.txt @@ -0,0 +1,32 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit https://127.0.0.1:8443 to use your application" + kubectl port-forward $POD_NAME 8443:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/clamp/charts/clamp-backend/templates/configmap.yaml b/kubernetes/clamp/charts/clamp-backend/templates/configmap.yaml new file mode 100644 index 0000000000..21df037a8a --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/templates/configmap.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} + spring_application_json: {{ tpl .Values.config.springApplicationJson . | quote }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-clamp-filebeat-configmap + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }} diff --git a/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml new file mode 100644 index 0000000000..6b6fcc7e56 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml @@ -0,0 +1,126 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/ready.py + args: + - --container-name + - mariadb + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + # side car containers + - name: {{ include "common.name" . }}-filebeat-onap + image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - name: {{ include "common.fullname" . }}-filebeat-conf + mountPath: /usr/share/filebeat/filebeat.yml + subPath: filebeat.yml + - name: {{ include "common.fullname" . }}-data-filebeat + mountPath: /usr/share/filebeat/data + - name: {{ include "common.fullname" . }}-logs + mountPath: /var/log/onap + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + args: + - "-Dcom.att.eelf.logging.file=file:/opt/clamp/logback.xml" + - "" + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - name: {{ include "common.fullname" . }}-logs + mountPath: /var/log/onap + - mountPath: /opt/clamp/sdc-controllers-config.json + name: {{ include "common.fullname" . }}-config + subPath: sdc-controllers-config.json + - mountPath: /opt/clamp/logback.xml + name: {{ include "common.fullname" . }}-config + subPath: logback.xml + env: + - name: SPRING_APPLICATION_JSON + valueFrom: + configMapKeyRef: + name: {{ template "common.fullname" . }} + key: spring_application_json + resources: +{{ include "common.resources" . | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: {{ include "common.fullname" . }}-config + configMap: + name: {{ include "common.fullname" . }} + items: + - key: sdc-controllers-config.json + path: sdc-controllers-config.json + - key: logback.xml + path: logback.xml + - name: {{ include "common.fullname" . }}-filebeat-conf + configMap: + name: {{ .Release.Name }}-clamp-filebeat-configmap + - name: {{ include "common.fullname" . }}-data-filebeat + emptyDir: {} + - name: {{ include "common.fullname" . }}-logs + emptyDir: {} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/charts/clamp-backend/templates/service.yaml b/kubernetes/clamp/charts/clamp-backend/templates/service.yaml new file mode 100644 index 0000000000..f1438a46c9 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/templates/service.yaml @@ -0,0 +1,40 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} diff --git a/kubernetes/clamp/charts/clamp-backend/values.yaml b/kubernetes/clamp/charts/clamp-backend/values.yaml new file mode 100644 index 0000000000..a72d0c5857 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/values.yaml @@ -0,0 +1,130 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2018-2019 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: # global defaults + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + persistence: {} + +flavor: small + +# application image +repository: nexus3.onap.org:10001 +image: onap/clamp-backend:4.1.2 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +################################################################# +# Application configuration defaults. +################################################################# +config: + log: + logstashServiceName: log-ls + logstashPort: 5044 + mysqlPassword: strong_pitchou + dataRootDir: /dockerdata-nfs + springApplicationJson: > + { + "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://clampdb.{{ include "common.namespace" . }}:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3", + "clamp.config.sdc.catalog.url": "http://sdc-be.{{ include "common.namespace" . }}:8080/sdc/v1/catalog/", + "clamp.config.sdc.hostUrl": "http://sdc-be.{{ include "common.namespace" . }}:8080/", + "clamp.config.sdc.serviceUrl": "http://sdc-be.{{ include "common.namespace" . }}:8080/sdc/v1/catalog/services", + "clamp.config.sdc.serviceUsername": "clamp", + "clamp.config.sdc.servicePassword": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981", + "clamp.config.files.sdcController": "file:/opt/clamp/sdc-controllers-config.json", + "clamp.config.dcae.inventory.url": "https://inventory.{{ include "common.namespace" . }}:8080", + "clamp.config.dcae.dispatcher.url": "https4://deployment-handler.{{ include "common.namespace" . }}:8443", + "clamp.config.dcae.deployment.url": "https4://deployment-handler.{{ include "common.namespace" . }}:8443", + "clamp.config.dcae.deployment.userName": "none", + "clamp.config.dcae.deployment.password": "none", + "clamp.config.policy.api.url": "https4://policy-api.{{ include "common.namespace" . }}:6969", + "clamp.config.policy.api.userName": "healthcheck", + "clamp.config.policy.api.password": "zb!XztG34", + "clamp.config.policy.pap.url": "https4://policy-pap.{{ include "common.namespace" . }}:6969", + "clamp.config.policy.pap.userName": "healthcheck", + "clamp.config.policy.pap.password": "zb!XztG34", + "clamp.config.policy.pdpUrl1": "https://pdp.{{ include "common.namespace" . }}:8081/pdp/ , testpdp, alpha123", + "clamp.config.policy.pdpUrl2": "https://pdp.{{ include "common.namespace" . }}:8081/pdp/ , testpdp, alpha123", + "clamp.config.policy.papUrl": "https://pap.{{ include "common.namespace" . }}:9091/pap/ , testpap, alpha123", + "clamp.config.policy.clientKey": "dGVzdA==", + "clamp.config.cadi.aafLocateUrl": "https://aaf-locate.{{ include "common.namespace" . }}:8095", + "com.att.eelf.logging.path": "/opt/clamp", + "com.att.eelf.logging.file": "logback.xml" + } + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 120 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + + +service: + type: ClusterIP + name: clamp-backend + portName: clamp-backend + internalPort: 8443 + externalPort: 443 + +ingress: + enabled: false + +#resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +resources: + small: + limits: + cpu: 1 + memory: 1.2Gi + requests: + cpu: 10m + memory: 800Mi + large: + limits: + cpu: 1 + memory: 1.2Gi + requests: + cpu: 10m + memory: 800Mi + unlimited: {} diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml index 9777b7c0ae..94e14b5b65 100644 --- a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml @@ -20,7 +20,7 @@ global: nodePortPrefix: 302 repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== readinessRepository: oomk8s - readinessImage: readiness-check:1.1.0 + readinessImage: readiness-check:2.0.0 persistence: {} flavor: small @@ -34,7 +34,7 @@ busyboxImage: library/busybox:latest # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-kibana:4.1.1 +image: onap/clamp-dashboard-kibana:4.1.2 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml b/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml index 7fd8641bad..689977db05 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml +++ b/kubernetes/clamp/charts/clamp-dash-logstash/values.yaml @@ -20,7 +20,7 @@ global: nodePortPrefix: 302 repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== readinessRepository: oomk8s - readinessImage: readiness-check:1.1.0 + readinessImage: readiness-check:2.0.0 persistence: {} flavor: small @@ -30,7 +30,7 @@ flavor: small # application image repository: nexus3.onap.org:10001 -image: onap/clamp-dashboard-logstash:4.1.1 +image: onap/clamp-dashboard-logstash:4.1.2 pullPolicy: Always # flag to enable debugging - application support required |