summaryrefslogtreecommitdiffstats
path: root/kubernetes/clamp/charts/clamp-backend/resources
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/clamp/charts/clamp-backend/resources')
-rw-r--r--kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml53
-rw-r--r--kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml316
-rw-r--r--kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json18
3 files changed, 387 insertions, 0 deletions
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..dab2e44f5e
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,53 @@
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+ #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+ paths:
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
+ #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+ ignore_older: 48h
+ # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+ clean_inactive: 96h
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+ #List of logstash server ip addresses with port number.
+ #But, in our case, this will be the loadbalancer IP address.
+ #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+ hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"]
+ #If enable will do load balancing among availabe Logstash, automatically.
+ loadbalance: true
+
+ #The list of root certificates for server verifications.
+ #If certificate_authorities is empty or not set, the trusted
+ #certificate authorities of the host system are used.
+ #ssl.certificate_authorities: $ssl.certificate_authorities
+
+ #The path to the certificate for SSL client authentication. If the certificate is not specified,
+ #client authentication is not available.
+ #ssl.certificate: $ssl.certificate
+
+ #The client certificate key used for client authentication.
+ #ssl.key: $ssl.key
+
+ #The passphrase used to decrypt an encrypted key stored in the configured key file
+ #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml
new file mode 100644
index 0000000000..551ed34ee4
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml
@@ -0,0 +1,316 @@
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+ <jmxConfigurator />
+ <!-- Example evaluator filter applied against console appender -->
+ <property
+ name="p_tim"
+ value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}" />
+ <property
+ name="p_lvl"
+ value="%level" />
+ <property
+ name="p_log"
+ value="%logger" />
+ <property
+ name="p_mdc"
+ value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" />
+ <property
+ name="p_msg"
+ value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" />
+ <property
+ name="p_exc"
+ value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" />
+ <property
+ name="p_mak"
+ value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" />
+ <property
+ name="p_thr"
+ value="%thread" />
+ <property
+ name="defaultPattern"
+ value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property
+ name="debugPattern"
+ value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" />
+
+ <!-- Example evaluator filter applied against console appender -->
+ <appender
+ name="STDOUT"
+ class="ch.qos.logback.core.ConsoleAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+ </pattern>
+ </encoder>
+ </appender>
+
+ <appender
+ name="ERROR"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <file>${logDirectory}/error.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>${defaultPattern}</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip
+ </fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+
+ <appender
+ name="DEBUG"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/debug.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+ <fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip
+ </fileNamePattern>
+ <maxFileSize>50MB</maxFileSize>
+ <maxHistory>30</maxHistory>
+ <totalSizeCap>10GB</totalSizeCap>
+ </rollingPolicy>
+ </appender>
+
+
+ <appender
+ name="AUDIT"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/audit.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/audit.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender
+ name="asyncEELFAudit"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="AUDIT" />
+ </appender>
+
+ <appender
+ name="METRIC"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/metric.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+ %msg%n</pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/metric.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender
+ name="asyncEELFMetrics"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="METRIC" />
+ </appender>
+
+ <!-- SECURITY related loggers -->
+ <appender
+ name="SECURITY"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/security.log</file>
+ <append>true</append>
+ <encoder>
+ <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+ </pattern>
+ </encoder>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <maxIndex>10</maxIndex>
+ <FileNamePattern>${logDirectory}/security.%i.log.zip
+ </FileNamePattern>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>10MB</maxFileSize>
+ </triggeringPolicy>
+ </appender>
+ <appender
+ name="asyncEELFSecurity"
+ class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="SECURITY" />
+ </appender>
+ <!-- logback jms appenders & loggers definition starts here -->
+ <appender
+ name="auditLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+ <appender
+ name="perfLogs"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ </filter>
+ <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+ </fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>5MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+ </encoder>
+ </appender>
+
+ <logger
+ name="org.onap.aaf"
+ level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <logger
+ name="org.apache"
+ level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ </logger>
+ <!-- Spring related loggers -->
+ <logger
+ name="org.springframework"
+ level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger
+ name="org.onap.clamp"
+ level="DEBUG">
+ <appender-ref ref="ERROR" />
+ <appender-ref ref="DEBUG" />
+ </logger>
+
+ <!-- CLDS related loggers -->
+ <logger
+ name="com.att.eelf.error"
+ level="OFF">
+ <appender-ref ref="ERROR" />
+ </logger>
+ <!-- EELF related loggers -->
+ <logger
+ name="com.att.eelf.audit"
+ level="INFO"
+ additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger
+ name="com.att.eelf.metrics"
+ level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger
+ name="com.att.eelf.security"
+ level="DEBUG"
+ additivity="false">
+ <appender-ref ref="asyncEELFSecurity" />
+ </logger>
+
+ <!-- logback internals logging -->
+ <logger
+ name="ch.qos.logback.classic"
+ level="INFO" />
+ <logger
+ name="ch.qos.logback.core"
+ level="INFO" />
+ <logger
+ name="AuditRecord"
+ level="INFO"
+ additivity="false">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger
+ name="AuditRecord_DirectCall"
+ level="INFO"
+ additivity="false">
+ <appender-ref ref="auditLogs" />
+ </logger>
+ <logger
+ name="PerfTrackerRecord"
+ level="INFO"
+ additivity="false">
+ <appender-ref ref="perfLogs" />
+ </logger>
+ <!-- logback jms appenders & loggers definition ends here -->
+
+ <root level="DEBUG">
+ <appender-ref ref="DEBUG" />
+ <appender-ref ref="STDOUT" />
+ </root>
+</included>
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json
new file mode 100644
index 0000000000..3adda95c11
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json
@@ -0,0 +1,18 @@
+{
+ "sdc-connections":{
+ "sdc-controller":{
+ "user": "clamp",
+ "consumerGroup": "clamp",
+ "consumerId": "clamp",
+ "environmentName": "AUTO",
+ "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443",
+ "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
+ "pollingInterval":30,
+ "pollingTimeout":30,
+ "activateServerTLSAuth":"false",
+ "keyStorePassword":"",
+ "keyStorePath":"",
+ "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"]
+ }
+ }
+}