diff options
Diffstat (limited to 'kubernetes/clamp/charts/clamp-backend/resources/config')
3 files changed, 387 insertions, 0 deletions
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml new file mode 100644 index 0000000000..dab2e44f5e --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml @@ -0,0 +1,53 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml new file mode 100644 index 0000000000..551ed34ee4 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml @@ -0,0 +1,316 @@ +<?xml version = "1.0" encoding = "UTF-8" ?> +<!-- +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +--> +<included> + <jmxConfigurator /> + <!-- Example evaluator filter applied against console appender --> + <property + name="p_tim" + value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}" /> + <property + name="p_lvl" + value="%level" /> + <property + name="p_log" + value="%logger" /> + <property + name="p_mdc" + value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" /> + <property + name="p_msg" + value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" /> + <property + name="p_exc" + value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" /> + <property + name="p_mak" + value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" /> + <property + name="p_thr" + value="%thread" /> + <property + name="defaultPattern" + value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" /> + <property + name="debugPattern" + value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" /> + + <!-- Example evaluator filter applied against console appender --> + <appender + name="STDOUT" + class="ch.qos.logback.core.ConsoleAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + <level>INFO</level> + </filter> + <encoder> + <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n + </pattern> + </encoder> + </appender> + + <appender + name="ERROR" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + <level>INFO</level> + </filter> + <file>${logDirectory}/error.log</file> + <append>true</append> + <encoder> + <pattern>${defaultPattern}</pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy"> + <fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip + </fileNamePattern> + <maxFileSize>50MB</maxFileSize> + <maxHistory>30</maxHistory> + <totalSizeCap>10GB</totalSizeCap> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + + <appender + name="DEBUG" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/debug.log</file> + <append>true</append> + <encoder> + <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n + </pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy"> + <fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip + </fileNamePattern> + <maxFileSize>50MB</maxFileSize> + <maxHistory>30</maxHistory> + <totalSizeCap>10GB</totalSizeCap> + </rollingPolicy> + </appender> + + + <appender + name="AUDIT" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/audit.log</file> + <append>true</append> + <encoder> + <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n + </pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <maxIndex>10</maxIndex> + <FileNamePattern>${logDirectory}/audit.%i.log.zip + </FileNamePattern> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + <appender + name="asyncEELFAudit" + class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="AUDIT" /> + </appender> + + <appender + name="METRIC" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/metric.log</file> + <append>true</append> + <encoder> + <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| + %msg%n</pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <maxIndex>10</maxIndex> + <FileNamePattern>${logDirectory}/metric.%i.log.zip + </FileNamePattern> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + <appender + name="asyncEELFMetrics" + class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="METRIC" /> + </appender> + + <!-- SECURITY related loggers --> + <appender + name="SECURITY" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <file>${logDirectory}/security.log</file> + <append>true</append> + <encoder> + <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n + </pattern> + </encoder> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <maxIndex>10</maxIndex> + <FileNamePattern>${logDirectory}/security.%i.log.zip + </FileNamePattern> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>10MB</maxFileSize> + </triggeringPolicy> + </appender> + <appender + name="asyncEELFSecurity" + class="ch.qos.logback.classic.AsyncAppender"> + <queueSize>256</queueSize> + <appender-ref ref="SECURITY" /> + </appender> + <!-- logback jms appenders & loggers definition starts here --> + <appender + name="auditLogs" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + </filter> + <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern> + </encoder> + </appender> + <appender + name="perfLogs" + class="ch.qos.logback.core.rolling.RollingFileAppender"> + <filter class="ch.qos.logback.classic.filter.ThresholdFilter"> + </filter> + <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file> + <rollingPolicy + class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> + <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip + </fileNamePattern> + <minIndex>1</minIndex> + <maxIndex>9</maxIndex> + </rollingPolicy> + <triggeringPolicy + class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> + <maxFileSize>5MB</maxFileSize> + </triggeringPolicy> + <encoder> + <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern> + </encoder> + </appender> + + <logger + name="org.onap.aaf" + level="DEBUG"> + <appender-ref ref="DEBUG" /> + </logger> + <logger + name="org.apache" + level="DEBUG"> + <appender-ref ref="DEBUG" /> + </logger> + <!-- Spring related loggers --> + <logger + name="org.springframework" + level="DEBUG"> + <appender-ref ref="DEBUG" /> + </logger> + + <!-- CLDS related loggers --> + <logger + name="org.onap.clamp" + level="DEBUG"> + <appender-ref ref="ERROR" /> + <appender-ref ref="DEBUG" /> + </logger> + + <!-- CLDS related loggers --> + <logger + name="com.att.eelf.error" + level="OFF"> + <appender-ref ref="ERROR" /> + </logger> + <!-- EELF related loggers --> + <logger + name="com.att.eelf.audit" + level="INFO" + additivity="false"> + <appender-ref ref="asyncEELFAudit" /> + </logger> + <logger + name="com.att.eelf.metrics" + level="DEBUG" + additivity="false"> + <appender-ref ref="asyncEELFMetrics" /> + </logger> + <logger + name="com.att.eelf.security" + level="DEBUG" + additivity="false"> + <appender-ref ref="asyncEELFSecurity" /> + </logger> + + <!-- logback internals logging --> + <logger + name="ch.qos.logback.classic" + level="INFO" /> + <logger + name="ch.qos.logback.core" + level="INFO" /> + <logger + name="AuditRecord" + level="INFO" + additivity="false"> + <appender-ref ref="auditLogs" /> + </logger> + <logger + name="AuditRecord_DirectCall" + level="INFO" + additivity="false"> + <appender-ref ref="auditLogs" /> + </logger> + <logger + name="PerfTrackerRecord" + level="INFO" + additivity="false"> + <appender-ref ref="perfLogs" /> + </logger> + <!-- logback jms appenders & loggers definition ends here --> + + <root level="DEBUG"> + <appender-ref ref="DEBUG" /> + <appender-ref ref="STDOUT" /> + </root> +</included> diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json new file mode 100644 index 0000000000..3adda95c11 --- /dev/null +++ b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json @@ -0,0 +1,18 @@ +{ + "sdc-connections":{ + "sdc-controller":{ + "user": "clamp", + "consumerGroup": "clamp", + "consumerId": "clamp", + "environmentName": "AUTO", + "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443", + "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981", + "pollingInterval":30, + "pollingTimeout":30, + "activateServerTLSAuth":"false", + "keyStorePassword":"", + "keyStorePath":"", + "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"] + } + } +} |