diff options
Diffstat (limited to 'kubernetes/aai/values.yaml')
| -rw-r--r-- | kubernetes/aai/values.yaml | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/kubernetes/aai/values.yaml b/kubernetes/aai/values.yaml new file mode 100644 index 0000000000..c0f0999d0c --- /dev/null +++ b/kubernetes/aai/values.yaml @@ -0,0 +1,382 @@ +# Copyright (c) 2017 Amdocs, Bell Canada +# Modifications Copyright (c) 2018 AT&T +# Modifications Copyright (c) 2020 Nokia +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Default values for aai. +# This is a YAML-formatted file. +# Declare variables to be passed into your templates. +global: # global defaults + nodePortPrefix: 302 + repository: nexus3.onap.org:10001 + dockerhubRepository: docker.io + busyboxImage: busybox + + readinessImage: onap/oom/readiness:3.0.1 + + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + + restartPolicy: Always + + installSidecarSecurity: false + aafEnabled: true + + fproxy: + name: forward-proxy + activeSpringProfiles: noHostVerification,cadi + image: onap/fproxy:2.1.13 + port: 10680 + + rproxy: + name: reverse-proxy + activeSpringProfiles: noHostVerification,cadi + image: onap/rproxy:2.1.13 + port: 10692 + + tproxyConfig: + name: init-tproxy-config + image: onap/tproxy-config:2.1.13 + + # AAF server details. Only needed if the AAF DNS does not resolve from the pod + aaf: + serverIp: 10.12.6.214 + serverHostname: aaf.osaaf.org + serverPort: 30247 + + cassandra: + #This will instantiate AAI cassandra cluster, default:shared cassandra. + localCluster: false + + #Service Name of the cassandra cluster to connect to. + #Override it to aai-cassandra if localCluster is enabled. + serviceName: cassandra + + #This should be same as shared cassandra instance or if localCluster is enabled + #then it should be same as aai-cassandra replicaCount + replicas: 3 + + #Cassanara login details + username: cassandra + password: cassandra + + aai: + serviceName: aai + babel: + serviceName: aai-babel + aaiElasticsearch: + serviceName: aai-elasticsearch + resources: + serviceName: aai-resources + sparkyBe: + serviceName: aai-sparky-be + dataRouter: + serviceName: aai-data-router + gizmo: + serviceName: aai-gizmo + modelloader: + serviceName: aai-modelloader + searchData: + serviceName: aai-search-data + traversal: + serviceName: aai-traversal + graphadmin: + serviceName: aai-graphadmin + spike: + serviceName: aai-spike + + initContainers: + enabled: true + # Specifies a list of jobs to be run + jobs: + # When enabled, it will create the schema based on oxm and edge rules + createSchema: + enabled: true + # When enabled, it will create the widget models via REST API to haproxy + updateQueryData: + enabled: true + #migration using helm hooks + migration: + enabled: false + remoteCassandra: + enabled: false + storage: + backend: cassandra + hostname: 10.10.10.10 + connectionTimeout: 100000 + cacheSize: 1000000 + keyConsistent: true + + #If backend is cql or cassandra it should be keyspace name + #else backend is hbase it should be hbase table name + name: aaigraph + + ## CQL driver specific properties for janusgraph + # cql: + # #Name of the Cassandra Cluster + # cluster: someclustername + # readConsistency: QUORUM + # writeConsistency: QUORUM + # replicationFactor: 3 + # localConsistencyForSysOps: true + + ## Cassandra driver specific properties for janusgraph + cassandra: + #Name of the Cassandra Cluster + clusterName: aai-cluster + localDataCenter: Pod lab + readConsistency: LOCAL_QUORUM + writeConsistency: LOCAL_QUORUM + replicationFactor: 3 + + #storage: + # backend: cassandra + # hostname: somehost1,somehost2,somehost3 + # connectionTimeout: 100000 + # cacheSize: 1000000 + # clusterName: someClusterName + # localDataCenter: someDataCenter + # keyConsistent: true + # #If backend is cql or cassandra it should be keyspace name + # #else backend is hbase it should be hbase table name + # name: your_hbase_table_or_keyspace_name + + ## CQL driver specific properties for janusgraph + # cql: + # #Name of the Cassandra Cluster + # cluster: someclustername + # readConsistency: QUORUM + # writeConsistency: QUORUM + # replicationFactor: 3 + # localConsistencyForSysOps: true + + ## Cassandra driver specific properties for janusgraph + # cassandra: + # #Name of the Cassandra Cluster + # cluster: someclustername + # readConsistency: LOCAL_QUORUM + # writeConsistency: LOCAL_QUORUM + # replicationFactor: 3 + + + # Common configuration for resources traversal and graphadmin + config: + # User information for the admin user in container + userId: 1000 + groupId: 1000 + + # Specifies that the cluster connected to a dynamic + # cluster being spinned up by kubernetes deployment + cluster: + cassandra: + dynamic: true + + # If cluster.cassandra.dynamic is set to false + # Then the following configuration should be uncommented + # This is if you are planning to connect to a existing + # Cassandra cluster instead of doing the deployment + #storage: + # backend: cassandra + # hostname: somehost1,somehost2,somehost3 + # connectionTimeout: 100000 + # cacheSize: 1000000 + # clusterName: someClusterName + # localDataCenter: someDataCenter + # keyConsistent: true + # # If backend is cql or cassandra it should be keyspace name + # # else backend is hbase it should be hbase table name + # name: your_hbase_table_or_keyspace_name + + # # CQL driver specific properties for janusgraph + # cql: + # # Name of the Cassandra Cluster + # cluster: someclustername + # readConsistency: QUORUM + # writeConsistency: QUORUM + # replicationFactor: 3 + # localConsistencyForSysOps: true + + # # Cassandra driver specific properties for janusgraph + # cassandra: + # # Name of the Cassandra Cluster + # cluster: someclustername + # readConsistency: LOCAL_QUORUM + # writeConsistency: LOCAL_QUORUM + # replicationFactor: 3 + + # Specifies if the basic authorization is enabled + basic: + auth: + enabled: true + username: AAI + passwd: AAI + + # Active spring profiles for the resources microservice + profiles: + active: production,dmaap,aaf-auth + + # Notification event specific properties + notification: + eventType: AAI-EVENT + domain: dev + + # Schema specific properties that include supported versions of api + schema: + # Specifies if the connection should be one way ssl, two way ssl or no auth + service: + client: one-way-ssl + # Specifies which translator to use if it has schema-service, then it will make a rest request to schema service + translator: + list: schema-service + source: + # Specifies which folder to take a look at + name: onap + uri: + # Base URI Path of the application + base: + path: /aai + version: + # Current version of the REST API + api: + default: v21 + # Specifies which version the depth parameter is configurable + depth: v11 + # List of all the supported versions of the API + list: v11,v12,v13,v14,v15,v16,v17,v18,v19,v20,v21 + # Specifies from which version related link should appear + related: + link: v11 + # Specifies from which version the app root change happened + app: + root: v11 + # Specifies from which version the xml namespace changed + namespace: + change: v12 + # Specifies from which version the edge label appeared in API + edge: + label: v12 + + # Keystore configuration password and filename + keystore: + filename: aai_keystore + passwd: OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0 + + # Truststore configuration password and filename + truststore: + filename: aai_keystore + passwd: OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0 + + # Specifies a list of files to be included in auth volume + auth: + files: + - aai_keystore + + # Specifies which clients should always default to realtime graph connection + realtime: + clients: SDNC,MSO,SO,robot-ete + + # Logback debug enabled + logback: + console: + # If enabled, container will print all logback to standard output + # This will make debugging much easier but it should only be done + # when debugging the issue and changed back as it can affect performance + # since when this is enabled, it prints a lot of information to console + enabled: false + +# application image +dockerhubRepository: registry.hub.docker.com +image: aaionap/haproxy:1.4.2 +pullPolicy: Always + +flavor: small +flavorOverride: small + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: + logstashServiceName: log-ls + logstashPort: 5044 + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +#This section is used when localCluster is enabled. AAI will create its own cassandra cluster for its specific use. +#Below command will instantiate the aai cassandra instances: +#helm deploy demo local/onap --version=4.0.0 --namespace onap --set aai.enabled=true \ +# --set aai.global.cassandra.localCluster=true \ +# --set aai.global.cassandra.serviceName=aai-cassandra +cassandra: + nameOverride: aai-cassandra + replicaCount: 3 + service: + name: aai-cassandra + persistence: + mountSubPath: aai/cassandra + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + type: NodePort + portName: aai-ssl + externalPort: 8443 + internalPort: 8443 + nodePort: 33 + # POLICY hotfix - Note this must be temporary + # See https://jira.onap.org/browse/POLICY-510 + aaiServiceClusterIp: + +ingress: + enabled: false + service: + - baseaddr: "aai.api" + name: "aai" + port: 8443 + config: + ssl: "redirect" + +resources: + small: + limits: + cpu: 2 + memory: 4Gi + requests: + cpu: 1 + memory: 1Gi + large: + limits: + cpu: 4 + memory: 8Gi + requests: + cpu: 2 + memory: 2Gi + unlimited: {} + |