summaryrefslogtreecommitdiffstats
path: root/kubernetes/aai/components/aai-elasticsearch/resources/config
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/aai/components/aai-elasticsearch/resources/config')
-rw-r--r--kubernetes/aai/components/aai-elasticsearch/resources/config/elasticsearch.yml372
-rw-r--r--kubernetes/aai/components/aai-elasticsearch/resources/config/jvm.options117
-rw-r--r--kubernetes/aai/components/aai-elasticsearch/resources/config/log4j2.properties88
3 files changed, 577 insertions, 0 deletions
diff --git a/kubernetes/aai/components/aai-elasticsearch/resources/config/elasticsearch.yml b/kubernetes/aai/components/aai-elasticsearch/resources/config/elasticsearch.yml
new file mode 100644
index 0000000000..ae12344635
--- /dev/null
+++ b/kubernetes/aai/components/aai-elasticsearch/resources/config/elasticsearch.yml
@@ -0,0 +1,372 @@
+# Copyright © 2018 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+##################### Elasticsearch Configuration Example #####################
+
+# This file contains an overview of various configuration settings,
+# targeted at operations staff. Application developers should
+# consult the guide at <http://elasticsearch.org/guide>.
+#
+# The installation procedure is covered at
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup.html>.
+#
+# Elasticsearch comes with reasonable defaults for most settings,
+# so you can try it out without bothering with configuration.
+#
+# Most of the time, these defaults are just fine for running a production
+# cluster. If you're fine-tuning your cluster, or wondering about the
+# effect of certain configuration option, please _do ask_ on the
+# mailing list or IRC channel [http://elasticsearch.org/community].
+
+# Any element in the configuration can be replaced with environment variables
+# by placing them in ${...} notation. For example:
+#
+# node.rack: ${RACK_ENV_VAR}
+
+# For information on supported formats and syntax for the config file, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup-configuration.html>
+################################### Cluster ###################################
+
+# Cluster name identifies your cluster for auto-discovery. If you're running
+# multiple clusters on the same network, make sure you're using unique names.
+#
+# cluster.name: elasticsearch
+
+cluster.name: ES_AAI
+
+#################################### Node #####################################
+
+node.name: ES_ONAP
+node.master: true
+node.data: true
+
+
+# Use the Cluster Health API [http://localhost:9200/_cluster/health], the
+# Node Info API [http://localhost:9200/_nodes] or GUI tools
+# such as <http://www.elasticsearch.org/overview/marvel/>,
+# <http://github.com/karmi/elasticsearch-paramedic>,
+# <http://github.com/lukas-vlcek/bigdesk> and
+# <http://mobz.github.com/elasticsearch-head> to inspect the cluster state.
+
+# By default, multiple nodes are allowed to start from the same installation location
+# to disable it, set the following:
+
+node.max_local_storage_nodes: 1
+
+
+#################################### Index ####################################
+# You can set a number of options (such as shard/replica options, mapping
+# or analyzer definitions, translog settings, ...) for indices globally,
+# in this file.
+#
+# Note, that it makes more sense to configure index settings specifically for
+# a certain index, either when creating it or by using the index templates API.
+#
+# See <http://elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules.html> and
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/indices-create-index.html>
+# for more information.
+
+# Set the number of shards (splits) of an index (5 by default):
+
+#index.number_of_shards: 5
+
+# Set the number of replicas (additional copies) of an index (1 by default):
+
+#index.number_of_replicas: 1
+
+# These settings directly affect the performance of index and search operations
+# in your cluster. Assuming you have enough machines to hold shards and
+# replicas, the rule of thumb is:
+#
+# 1. Having more *shards* enhances the _indexing_ performance and allows to
+# _distribute_ a big index across machines.
+# 2. Having more *replicas* enhances the _search_ performance and improves the
+# cluster _availability_.
+#
+# The "number_of_shards" is a one-time setting for an index.
+#
+# The "number_of_replicas" can be increased or decreased anytime,
+# by using the Index Update Settings API.
+#
+# Elasticsearch takes care about load balancing, relocating, gathering the
+# results from nodes, etc. Experiment with different settings to fine-tune
+# your setup.
+
+# Use the Index Status API (<http://localhost:9200/A/_status>) to inspect
+# the index status.
+
+
+#################################### Paths ####################################
+
+# Path to directory containing configuration (this file and logging.yml):
+#path.conf: /opt/app/elasticsearch/config
+
+# Path to directory where to store index data allocated for this node.
+# Use swm auto link to redirect the data directory if necessary.
+
+path.data: /usr/share/elasticsearch/data
+
+# path.data: /path/to/data1,/path/to/data2
+
+# path.work: /path/to/work
+
+path.logs: /usr/share/elasticsearch/logs
+
+#path.plugins: /opt/app/elasticsearch/plugins
+
+
+#################################### Plugin ###################################
+
+# If a plugin listed here is not installed for current node, the node will not start.
+#
+# plugin.mandatory: mapper-attachments,lang-groovy
+
+
+################################### Memory ####################################
+
+# Elasticsearch performs poorly when JVM starts swapping: you should ensure that
+# it _never_ swaps.
+#
+# Set this property to true to lock the memory: default is true
+
+#bootstrap.memory_lock: true
+
+# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set
+# to the same value, and that the machine has enough memory to allocate
+# for Elasticsearch, leaving enough memory for the operating system itself.
+#
+# You should also make sure that the Elasticsearch process is allowed to lock
+# the memory, eg. by using `ulimit -l unlimited`.
+
+### Kernel Settings
+
+# Elasticsearch installs system call filters of various flavors depending on the
+# operating system (e.g., seccomp on Linux). These system call filters are
+# installed to prevent the ability to execute system calls related to forking
+# as a defense mechanism against arbitrary code execution attacks on
+# Elasticsearch The system call filter check ensures that if system call
+# filters are enabled, then they were successfully installed. To pass the system
+# call filter check you must either fix any configuration errors on your system
+# that prevented system call filters from installing (check your logs), or at
+# your own risk disable system call filters by setting
+# bootstrap.system_call_filter to false.
+# See: https://www.elastic.co/guide/en/elasticsearch/reference/current/system-call-filter-check.html
+#
+# seccomp is found in Linux kernels: 2.6.37–2.6.39, 3.0–3.19, 4.0–4.9,
+# 4.10-rc+HEAD
+#
+# The default setting is to disable the filters assuming an older kernel
+# version where seccomp is not available.
+# See: https://discuss.elastic.co/t/elasticsearch-warn-unable-to-install-syscall-filter/42819
+
+bootstrap.system_call_filter: false
+
+############################## Network And HTTP ###############################
+# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens
+# on port [9200-9300] for HTTP traffic and on port [9300-9400] for node-to-node
+# communication. (the range means that if the port is busy, it will automatically
+# try the next port).
+
+# Set the bind address specifically (IPv4 or IPv6):
+network.bind_host: 0.0.0.0
+
+# Set the address other nodes will use to communicate with this node. If not
+# set, it is automatically derived. It must point to an actual IP address.
+
+# network.publish_host: 0.0.0.0
+
+# Set both 'bind_host' and 'publish_host':
+# network.host: 192.168.0.1
+
+
+# Set a custom port for the node to node communication (9300 by default):
+transport.tcp.port: {{ .Values.service.internalPort2 }}
+
+# Enable compression for all communication between nodes (disabled by default):
+transport.tcp.compress: false
+
+# Set a custom port to listen for HTTP traffic:
+# http.port: 9200
+http.port: {{ .Values.service.internalPort }}
+
+# Set a custom allowed content length:
+# http.max_content_length: 100mb
+http.max_content_length: 100mb
+
+# Disable HTTP completely:
+# http.enabled: false
+http.enabled: true
+
+# This is specifically useful for permitting which front end Kibana Url's are permitted to access elastic search.
+http.cors.enabled: false
+http.cors.allow-origin: "/.*/"
+http.cors.allow-headers: X-Requested-With, Content-Type, Content-Length
+http.cors.allow-credentials: false
+################################### Gateway ###################################
+
+# The gateway allows for persisting the cluster state between full cluster
+# restarts. Every change to the state (such as adding an index) will be stored
+# in the gateway, and when the cluster starts up for the first time,
+# it will read its state from the gateway.
+# There are several types of gateway implementations. For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-gateway.html>.
+
+# The default gateway type is the "local" gateway (recommended):
+#
+#gateway.type: local
+#gateway.type: local
+
+# Settings below control how and when to start the initial recovery process on
+# a full cluster restart (to reuse as much local data as possible when using shared
+# gateway).
+
+# Allow recovery process after N nodes in a cluster are up:
+#
+# gateway.recover_after_nodes: 1
+gateway.recover_after_nodes: 1
+
+# Set the timeout to initiate the recovery process, once the N nodes
+# from previous setting are up (accepts time value):
+#
+#gateway.recover_after_time: 5m
+gateway.recover_after_time: 5m
+
+# Set how many nodes are expected in this cluster. Once these N nodes
+# are up (and recover_after_nodes is met), begin recovery process immediately
+# (without waiting for recover_after_time to expire):
+#
+# gateway.expected_nodes: 2
+gateway.expected_nodes: 2
+
+############################# Recovery Throttling #############################
+
+# These settings allow to control the process of shards allocation between
+# nodes during initial recovery, replica allocation, rebalancing,
+# or when adding and removing nodes.
+
+# Set the number of concurrent recoveries happening on a node:
+#
+# 1. During the initial recovery
+#
+# cluster.routing.allocation.node_initial_primaries_recoveries: 4
+#
+# 2. During adding/removing nodes, rebalancing, etc
+#
+# cluster.routing.allocation.node_concurrent_recoveries: 2
+
+# Set to throttle throughput when recovering (eg. 100mb, by default 20mb):
+# indices.recovery.max_bytes_per_sec: 20mb
+indices.recovery.max_bytes_per_sec: 20mb
+
+# Set to limit the number of open concurrent streams when
+# recovering a shard from a peer:
+#
+# indices.recovery.concurrent_streams: 5
+#indices.recovery.concurrent_streams: 5
+
+################################## Discovery ##################################
+
+# Discovery infrastructure ensures nodes can be found within a cluster
+# and master node is elected. Multicast discovery is the default.
+
+# Set to ensure a node sees N other master eligible nodes to be considered
+# operational within the cluster. Its recommended to set it to a higher value
+# than 1 when running more than 2 nodes in the cluster.
+#
+discovery.zen.minimum_master_nodes: 1
+
+# Set the time to wait for ping responses from other nodes when discovering.
+# Set this option to a higher value on a slow or congested network
+# to minimize discovery failures:
+#
+# discovery.zen.ping_timeout: 3s
+discovery.zen.ping_timeout: 3s
+
+# For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html>
+
+# Unicast discovery allows to explicitly control which nodes will be used
+# to discover the cluster. It can be used when multicast is not present,
+# or to restrict the cluster communication-wise.
+#
+# 1. Disable multicast discovery (enabled by default):
+# discovery.zen.ping.multicast.enabled: false
+#discovery.zen.ping.multicast.enabled: false
+
+
+# 2. Configure an initial list of master nodes in the cluster
+# to perform discovery when new nodes (master or data) are started:
+#
+# discovery.zen.ping.unicast.hosts: ["host1", "host2:port"]
+discovery.zen.ping.unicast.hosts: ["0.0.0.0"]
+
+# EC2 discovery allows to use AWS EC2 API in order to perform discovery.
+#
+# You have to install the cloud-aws plugin for enabling the EC2 discovery.
+#
+# For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-ec2.html>
+#
+#
+# See <http://elasticsearch.org/tutorials/elasticsearch-on-ec2/>
+# for a step-by-step tutorial.
+
+# GCE discovery allows to use Google Compute Engine API in order to perform discovery.
+#
+# You have to install the cloud-gce plugin for enabling the GCE discovery.
+#
+# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-gce>.
+
+# Azure discovery allows to use Azure API in order to perform discovery.
+#
+# You have to install the cloud-azure plugin for enabling the Azure discovery.
+#
+# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-azure>.
+
+################################## Slow Log ##################################
+
+# Shard level query and fetch threshold logging.
+
+#index.search.slowlog.threshold.query.warn: 10s
+#index.search.slowlog.threshold.query.info: 5s
+#index.search.slowlog.threshold.query.debug: 2s
+#index.search.slowlog.threshold.query.trace: 500ms
+
+#index.search.slowlog.threshold.fetch.warn: 1s
+#index.search.slowlog.threshold.fetch.info: 800ms
+#index.search.slowlog.threshold.fetch.debug: 500ms
+#index.search.slowlog.threshold.fetch.trace: 200ms
+
+#index.indexing.slowlog.threshold.index.warn: 10s
+#index.indexing.slowlog.threshold.index.info: 5s
+#index.indexing.slowlog.threshold.index.debug: 2s
+#index.indexing.slowlog.threshold.index.trace: 500ms
+
+################################## GC Logging ################################
+
+#monitor.jvm.gc.young.warn: 1000ms
+#monitor.jvm.gc.young.info: 700ms
+#monitor.jvm.gc.young.debug: 400ms
+
+#monitor.jvm.gc.old.warn: 10s
+#monitor.jvm.gc.old.info: 5s
+#monitor.jvm.gc.old.debug: 2s
+
+
+# x-pack security conflicts with searchguard
+xpack.security.enabled: false
+xpack.ml.enabled: false
+xpack.monitoring.enabled: false
+xpack.watcher.enabled: false
diff --git a/kubernetes/aai/components/aai-elasticsearch/resources/config/jvm.options b/kubernetes/aai/components/aai-elasticsearch/resources/config/jvm.options
new file mode 100644
index 0000000000..e69d7983c0
--- /dev/null
+++ b/kubernetes/aai/components/aai-elasticsearch/resources/config/jvm.options
@@ -0,0 +1,117 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+## JVM configuration
+
+################################################################
+## IMPORTANT: JVM heap size
+################################################################
+##
+## You should always set the min and max JVM heap
+## size to the same value. For example, to set
+## the heap to 4 GB, set:
+##
+## -Xms4g
+## -Xmx4g
+##
+## See https://www.elastic.co/guide/en/elasticsearch/reference/current/heap-size.html
+## for more information
+##
+################################################################
+
+# Xms represents the initial size of total heap space
+# Xmx represents the maximum size of total heap space
+
+-Xms1g
+-Xmx1g
+
+################################################################
+## Expert settings
+################################################################
+##
+## All settings below this section are considered
+## expert settings. Don't tamper with them unless
+## you understand what you are doing
+##
+################################################################
+
+## GC configuration
+-XX:+UseConcMarkSweepGC
+-XX:CMSInitiatingOccupancyFraction=75
+-XX:+UseCMSInitiatingOccupancyOnly
+
+## optimizations
+
+# pre-touch memory pages used by the JVM during initialization
+-XX:+AlwaysPreTouch
+
+## basic
+
+# force the server VM
+-server
+
+# explicitly set the stack size
+-Xss1m
+
+# set to headless, just in case
+-Djava.awt.headless=true
+
+# ensure UTF-8 encoding by default (e.g. filenames)
+-Dfile.encoding=UTF-8
+
+# use our provided JNA always versus the system one
+-Djna.nosys=true
+
+# turn off a JDK optimization that throws away stack traces for common
+# exceptions because stack traces are important for debugging
+-XX:-OmitStackTraceInFastThrow
+
+# flags to configure Netty
+-Dio.netty.noUnsafe=true
+-Dio.netty.noKeySetOptimization=true
+-Dio.netty.recycler.maxCapacityPerThread=0
+
+# log4j 2
+-Dlog4j.shutdownHookEnabled=false
+-Dlog4j2.disable.jmx=true
+
+## heap dumps
+
+# generate a heap dump when an allocation from the Java heap fails
+# heap dumps are created in the working directory of the JVM
+-XX:+HeapDumpOnOutOfMemoryError
+
+# specify an alternative path for heap dumps
+# ensure the directory exists and has sufficient space
+#-XX:HeapDumpPath=/heap/dump/path
+
+## GC logging
+
+#-XX:+PrintGCDetails
+#-XX:+PrintGCTimeStamps
+#-XX:+PrintGCDateStamps
+#-XX:+PrintClassHistogram
+#-XX:+PrintTenuringDistribution
+#-XX:+PrintGCApplicationStoppedTime
+
+# log GC status to a file with time stamps
+# ensure the directory exists
+#-Xloggc:${loggc}
+
+# By default, the GC log file will not rotate.
+# By uncommenting the lines below, the GC log file
+# will be rotated every 128MB at most 32 times.
+#-XX:+UseGCLogFileRotation
+#-XX:NumberOfGCLogFiles=32
+#-XX:GCLogFileSize=128M
diff --git a/kubernetes/aai/components/aai-elasticsearch/resources/config/log4j2.properties b/kubernetes/aai/components/aai-elasticsearch/resources/config/log4j2.properties
new file mode 100644
index 0000000000..e674865221
--- /dev/null
+++ b/kubernetes/aai/components/aai-elasticsearch/resources/config/log4j2.properties
@@ -0,0 +1,88 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+status = error
+
+# log action execution errors for easier debugging
+logger.action.name = org.elasticsearch.action
+logger.action.level = INFO
+
+appender.console.type = Console
+appender.console.name = console
+appender.console.layout.type = PatternLayout
+appender.console.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%m%n
+
+appender.rolling.type = RollingFile
+appender.rolling.name = rolling
+appender.rolling.fileName = ${sys:es.logs.base_path}.log
+appender.rolling.layout.type = PatternLayout
+appender.rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%.10000m%n
+appender.rolling.filePattern = ${sys:es.logs.base_path}-%d{yyyy-MM-dd}.log
+appender.rolling.policies.type = Policies
+appender.rolling.policies.time.type = TimeBasedTriggeringPolicy
+appender.rolling.policies.time.interval = 1
+appender.rolling.policies.time.modulate = true
+
+rootLogger.level = info
+rootLogger.appenderRef.console.ref = console
+rootLogger.appenderRef.rolling.ref = rolling
+
+# appender.deprecation_rolling.type = RollingFile
+# appender.deprecation_rolling.name = deprecation_rolling
+# appender.deprecation_rolling.fileName = ${sys:es.logs.base_path}_deprecation.log
+# appender.deprecation_rolling.layout.type = PatternLayout
+# appender.deprecation_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c{1.}] %marker%.10000m%n
+# appender.deprecation_rolling.filePattern = ${sys:es.logs.base_path}_deprecation-%i.log.gz
+# appender.deprecation_rolling.policies.type = Policies
+# appender.deprecation_rolling.policies.size.type = SizeBasedTriggeringPolicy
+# appender.deprecation_rolling.policies.size.size = 1GB
+# appender.deprecation_rolling.strategy.type = DefaultRolloverStrategy
+# appender.deprecation_rolling.strategy.max = 4
+
+# logger.deprecation.name = org.elasticsearch.deprecation
+# logger.deprecation.level = warn
+# logger.deprecation.appenderRef.deprecation_rolling.ref = deprecation_rolling
+# logger.deprecation.additivity = false
+
+appender.index_search_slowlog_rolling.type = RollingFile
+appender.index_search_slowlog_rolling.name = index_search_slowlog_rolling
+appender.index_search_slowlog_rolling.fileName = ${sys:es.logs.base_path}_index_search_slowlog.log
+appender.index_search_slowlog_rolling.layout.type = PatternLayout
+appender.index_search_slowlog_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c] %marker%.10000m%n
+appender.index_search_slowlog_rolling.filePattern = ${sys:es.logs.base_path}_index_search_slowlog-%d{yyyy-MM-dd}.log
+appender.index_search_slowlog_rolling.policies.type = Policies
+appender.index_search_slowlog_rolling.policies.time.type = TimeBasedTriggeringPolicy
+appender.index_search_slowlog_rolling.policies.time.interval = 1
+appender.index_search_slowlog_rolling.policies.time.modulate = true
+
+logger.index_search_slowlog_rolling.name = index.search.slowlog
+logger.index_search_slowlog_rolling.level = trace
+logger.index_search_slowlog_rolling.appenderRef.index_search_slowlog_rolling.ref = index_search_slowlog_rolling
+logger.index_search_slowlog_rolling.additivity = false
+
+appender.index_indexing_slowlog_rolling.type = RollingFile
+appender.index_indexing_slowlog_rolling.name = index_indexing_slowlog_rolling
+appender.index_indexing_slowlog_rolling.fileName = ${sys:es.logs.base_path}_index_indexing_slowlog.log
+appender.index_indexing_slowlog_rolling.layout.type = PatternLayout
+appender.index_indexing_slowlog_rolling.layout.pattern = [%d{ISO8601}][%-5p][%-25c] %marker%.10000m%n
+appender.index_indexing_slowlog_rolling.filePattern = ${sys:es.logs.base_path}_index_indexing_slowlog-%d{yyyy-MM-dd}.log
+appender.index_indexing_slowlog_rolling.policies.type = Policies
+appender.index_indexing_slowlog_rolling.policies.time.type = TimeBasedTriggeringPolicy
+appender.index_indexing_slowlog_rolling.policies.time.interval = 1
+appender.index_indexing_slowlog_rolling.policies.time.modulate = true
+
+logger.index_indexing_slowlog.name = index.indexing.slowlog.index
+logger.index_indexing_slowlog.level = trace
+logger.index_indexing_slowlog.appenderRef.index_indexing_slowlog_rolling.ref = index_indexing_slowlog_rolling
+logger.index_indexing_slowlog.additivity = false