summaryrefslogtreecommitdiffstats
path: root/kubernetes/aaf/charts
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/aaf/charts')
-rw-r--r--kubernetes/aaf/charts/aaf-cm/.helmignore21
-rw-r--r--kubernetes/aaf/charts/aaf-cm/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml114
-rw-r--r--kubernetes/aaf/charts/aaf-cm/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-cm/values.yaml86
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql169
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat7
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idxbin56 -> 0 bytes
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql112
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql11
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql122
-rw-r--r--kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql8
-rw-r--r--kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml36
-rw-r--r--kubernetes/aaf/charts/aaf-cs/templates/service.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-cs/values.yaml5
-rw-r--r--kubernetes/aaf/charts/aaf-fs/.helmignore21
-rw-r--r--kubernetes/aaf/charts/aaf-fs/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml114
-rw-r--r--kubernetes/aaf/charts/aaf-fs/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-fs/values.yaml86
-rw-r--r--kubernetes/aaf/charts/aaf-gui/.helmignore21
-rw-r--r--kubernetes/aaf/charts/aaf-gui/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml114
-rw-r--r--kubernetes/aaf/charts/aaf-gui/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-gui/values.yaml87
-rw-r--r--kubernetes/aaf/charts/aaf-hello/.helmignore21
-rw-r--r--kubernetes/aaf/charts/aaf-hello/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml114
-rw-r--r--kubernetes/aaf/charts/aaf-hello/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-hello/values.yaml86
-rw-r--r--kubernetes/aaf/charts/aaf-locate/.helmignore21
-rw-r--r--kubernetes/aaf/charts/aaf-locate/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-locate/templates/deployment.yaml112
-rw-r--r--kubernetes/aaf/charts/aaf-locate/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-locate/values.yaml90
-rw-r--r--kubernetes/aaf/charts/aaf-oauth/.helmignore21
-rw-r--r--kubernetes/aaf/charts/aaf-oauth/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt19
-rw-r--r--kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml114
-rw-r--r--kubernetes/aaf/charts/aaf-oauth/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-oauth/values.yaml86
-rw-r--r--kubernetes/aaf/charts/aaf-service/Chart.yaml18
-rw-r--r--kubernetes/aaf/charts/aaf-service/templates/deployment.yaml114
-rw-r--r--kubernetes/aaf/charts/aaf-service/templates/service.yaml41
-rw-r--r--kubernetes/aaf/charts/aaf-service/values.yaml87
-rw-r--r--kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml2
-rw-r--r--kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml3
-rw-r--r--kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml6
-rw-r--r--kubernetes/aaf/charts/aaf-sms/values.yaml2
55 files changed, 2333 insertions, 244 deletions
diff --git a/kubernetes/aaf/charts/aaf-cm/.helmignore b/kubernetes/aaf/charts/aaf-cm/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cm/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/aaf/charts/aaf-cm/Chart.yaml b/kubernetes/aaf/charts/aaf-cm/Chart.yaml
new file mode 100644
index 0000000000..00832d69e4
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cm/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF Certificate Manager
+name: aaf-cm
+version: 2.0.0 \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml
new file mode 100644
index 0000000000..652e2ac040
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ - --container-name
+ - aaf-locate
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/cm/bin/cm >> /opt/app/osaaf/logs/cm/stdout`date -I` 2>> /opt/app/osaaf/logs/cm/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-cm/templates/service.yaml b/kubernetes/aaf/charts/aaf-cm/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cm/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml
new file mode 100644
index 0000000000..75b1a7b564
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cm/values.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_cm:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-cm
+ type: ClusterIP
+ portName: aaf-cm
+ #targetPort
+ internalPort: 8150
+ #port
+ externalPort: 8150
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql
deleted file mode 100644
index 6fddf65001..0000000000
--- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql
+++ /dev/null
@@ -1,169 +0,0 @@
-USE authz;
-
-// Create Root pass
-INSERT INTO cred (id,ns,type,cred,expires)
- VALUES ('dgl@openecomp.org','org.openecomp',1,0xab3831f27b39d7a039f9a92aa2bbfe51,'2020-12-31');
-
-INSERT INTO cred (id,ns,type,cred,expires)
- VALUES ('m99751@dmaapBC.openecomp.org','org.openecomp.dmaapBC',1,0xab3831f27b39d7a039f9a92aa2bbfe51,'2020-12-31');
-
-INSERT INTO cred (id,ns,type,cred,expires)
- VALUES ('m99501@dmaapBC.openecomp.org','org.openecomp.dmaapBC',1,0xab3831f27b39d7a039f9a92aa2bbfe51,'2020-12-31');
-
-
-// Create 'com' root NS
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('com',1,'Root Namespace',null,1);
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('com','admin',{'com.access|*|*'},'Com Admins');
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('com','owner',{'com.access|*|read'},'Com Owners');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('com','access','*','read',{'com.owner'},'Com Read Access');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('com','access','*','*',{'com.admin'},'Com Write Access');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','com.owner','2020-12-31','com','owner');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','com.admin','2020-12-31','com','admin');
-
-// Create org root NS
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('org',1,'Root Namespace Org',null,1);
-
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('org.openecomp.dcae',3,'DCAE Namespace Org','org.openecomp',3);
-
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('org.openecomp.dmaapBC',3,'DMaaP BC Namespace Org','org.openecomp',3);
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('org','admin',{'org.access|*|*'},'Com Admins');
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('org','owner',{'org.access|*|read'},'Com Owners');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('org','access','*','read',{'org.owner'},'Com Read Access');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('org','access','*','*',{'org.admin'},'Com Write Access');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','org.owner','2020-12-31','org','owner');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','org.admin','2020-12-31','org','admin');
-
-
-// Create com.att
-
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('com.att',2,'AT&T Namespace','com',2);
-
-INSERT INTO role(ns, name, perms,description)
- VALUES('com.att','admin',{'com.att.access|*|*'},'AT&T Admins');
-
-INSERT INTO role(ns, name, perms,description)
- VALUES('com.att','owner',{'com.att.access|*|read'},'AT&T Owners');
-
-INSERT INTO perm(ns, type, instance, action, roles,description)
- VALUES ('com.att','access','*','read',{'com.att.owner'},'AT&T Read Access');
-
-INSERT INTO perm(ns, type, instance, action, roles,description)
- VALUES ('com.att','access','*','*',{'com.att.admin'},'AT&T Write Access');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','com.att.owner','2020-12-31','com.att','owner');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','com.att.admin','2020-12-31','com.att','admin');
-
-// Create com.att.aaf
-
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('com.att.aaf',3,'Application Authorization Framework','com.att',3);
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('com.att.aaf','admin',{'com.att.aaf.access|*|*'},'AAF Admins');
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('com.att.aaf','owner',{'com.att.aaf.access|*|read'},'AAF Owners');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('com.att.aaf','access','*','read',{'com.att.aaf.owner'},'AAF Read Access');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('com.att.aaf','access','*','*',{'com.att.aaf.admin'},'AAF Write Access');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','com.att.aaf.admin','2020-12-31','com.att.aaf','admin');
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','com.att.aaf.owner','2020-12-31','com.att.aaf','owner');
-
-
-// Create org.openecomp
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('org.openecomp',2,'Open EComp NS','com.att',2);
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('org.openecomp','admin',{'org.openecomp.access|*|*'},'OpenEcomp Admins');
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('org.openecomp','owner',{'org.openecomp.access|*|read'},'OpenEcomp Owners');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('org.openecomp','access','*','read',{'org.openecomp.owner'},'OpenEcomp Read Access');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('org.openecomp','access','*','*',{'org.openecomp.admin'},'OpenEcomp Write Access');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','org.openecomp.admin','2020-12-31','org.openecomp','admin');
-
-// Create org.openecomp.dmaapBC
-
-INSERT INTO ns (name,scope,description,parent,type)
- VALUES('org.openecomp.dmaapBC',3,'Application Authorization Framework','org.openecomp',3);
-
-//INSERT INTO role(ns, name, perms, description)
-// VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*'},'AAF Admins');
-
-INSERT INTO role(ns, name, perms, description)
-VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*','org.openecomp.dmaapBC.topicFactory|:org.openecomp.dmaapBC.topic:org.openecomp.dmaapBC|create','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|sub','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|pub'},'AAF Admins');
-
-//INSERT INTO role(ns, name, perms, description)
-//VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|sub'},'AAF Admins');
-
-//INSERT INTO role(ns, name, perms, description)
-//VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|pub'},'AAF Admins');
-
-
-
-INSERT INTO role(ns, name, perms, description)
- VALUES('org.openecomp.dmaapBC','owner',{'org.openecomp.dmaapBC.access|*|read'},'AAF Owners');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('org.openecomp.dmaapBC','access','*','read',{'org.openecomp.dmaapBC.owner'},'AAF Read Access');
-
-INSERT INTO perm(ns, type, instance, action, roles, description)
- VALUES ('org.openecomp.dmaapBC','access','*','*',{'org.openecomp.dmaapBC.admin'},'AAF Write Access');
-
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','org.openecomp.dmaapBC.admin','2020-12-31','org.openecomp.dmaapBC','admin');
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('dgl@openecomp.org','org.openecomp.dmaapBC.owner','2020-12-31','org.openecomp.dmaapBC','owner');
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('m99751@dmaapBC.openecomp.org','org.openecomp.dmaapBC.admin','2020-12-31','org.openecomp.dmaapBC','admin');
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('m99751@dmaapBC.openecomp.org','org.openecomp.dmaapBC.owner','2020-12-31','org.openecomp.dmaapBC','owner');
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('m99501@dmaapBC.openecomp.org','org.openecomp.dmaapBC.admin','2020-12-31','org.openecomp.dmaapBC','admin');
-INSERT INTO user_role(user,role,expires,ns,rname)
- VALUES ('m99501@dmaapBC.openecomp.org','org.openecomp.dmaapBC.owner','2020-12-31','org.openecomp.dmaapBC','owner');
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat
deleted file mode 100644
index 98bf99a3d1..0000000000
--- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat
+++ /dev/null
@@ -1,7 +0,0 @@
-iowna|Ima D. Owner|Ima|Owner|314-123-2000|ima.d.owner@osaaf.com|e|
-mmanager|Mark D. Manager|Mark|Manager|314-123-1234|mark.d.manager@osaaf.com|e|iowna
-bdevl|Robert D. Developer|Bob|Developer|314-123-1235|bob.d.develper@osaaf.com|e|mmanager
-mmarket|Mary D. Marketer|Mary|Marketer|314-123-1236|mary.d.marketer@osaaf.com|e|mmanager
-ccontra|Clarice D. Contractor|Clarice|Contractor|314-123-1237|clarice.d.contractor@osaaf.com|c|mmanager
-iretired|Ira Lee M. Retired|Ira|Retired|314-123-1238|clarice.d.contractor@osaaf.com|n|mmanager
-osaaf|ID of AAF|||||a|bdevl
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idx b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idx
deleted file mode 100644
index 78fc0a5693..0000000000
--- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idx
+++ /dev/null
Binary files differ
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql
index 81700f830c..c06e5ee952 100644
--- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql
+++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql
@@ -1,35 +1,6 @@
-// For Developer Machine single instance
-//
-CREATE KEYSPACE authz
-WITH REPLICATION = {'class' : 'SimpleStrategy','replication_factor':1};
-//
-// From Ravi, 6-17-2014. User for DEVL->TEST
-//
-// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'HYWRCA02': '2', 'BRHMALDC': '2' };
-//
-// PROD
-//
-// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','ALPSGACT': '2','STLSMORC': '2','BRHMALDC': '2' };
-//
-// create user authz with password '<AUTHZ PASSWORD>' superuser;
-// grant all on keyspace authz to authz;
-//
-// For TEST (aaf_test)
-// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'BRHMALDC': '1' };
-//
-// DEVL
-// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','STLSMORC': '2' };
-//
-// TEST / PERF
-// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','STLSMORC': '3','KGMTNC20': '3' };
-//
-// IST
-// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','STLSMORC':'3',
-// 'DLLSTXCF':'3','KGMTNC20':'3','SFLDMIBB':'3','HYWRCA02':'3' };
-//
-// with 6 localized with ccm
-// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'dc1': '2', 'dc2': '2' };
-//
+
+// Table Initialization
+// First make sure the keyspace exists.
USE authz;
@@ -51,12 +22,6 @@ CREATE TABLE ns (
);
CREATE INDEX ns_parent on ns(parent);
-
-// Oct 2015, not performant. Made Owner and Attrib first class Roles,
-// April, 2015. Originally, the plan was to utilize Cassandra 2.1.2, however, other team's preferences were to remain at current levels.
-// Therefore, we are taking the separate table approach. (coder Jeremiah Rohwedder)
-// We had dropped this by making first class objects of Responsible (Owner) and Admin. We need this again to mark namespaces
-// as having certain tools, like SWM, etc.
CREATE TABLE ns_attrib (
ns varchar,
key varchar,
@@ -125,10 +90,10 @@ CREATE INDEX cert_id ON cert(id);
CREATE INDEX cert_x500 ON cert(x500);
CREATE TABLE notify (
- user text,
- type int,
- last timestamp,
- checksum int,
+ user text,
+ type int,
+ last timestamp,
+ checksum int,
PRIMARY KEY (user,type)
);
@@ -155,14 +120,16 @@ CREATE TABLE artifact (
sponsor text,
ca text,
dir text,
- appName text,
os_user text,
+ ns text,
notify text,
expires timestamp,
- renewDays int,
+ renewDays int,
+ sans Set<text>,
PRIMARY KEY (mechid,machine)
);
CREATE INDEX artifact_machine ON artifact(machine);
+CREATE INDEX artifact_ns ON artifact(ns);
//
// Non-Critical Table functions
@@ -216,6 +183,7 @@ CREATE TABLE approval (
status varchar, // approval status. pending, approved, denied
memo varchar, // Text for Approval to know what's going on
operation varchar, // List operation to perform
+ last_notified timestamp, // Timestamp for the last time approver was notified
PRIMARY KEY(id)
);
CREATE INDEX appr_approver_idx ON approval(approver);
@@ -223,6 +191,19 @@ CREATE INDEX appr_user_idx ON approval(user);
CREATE INDEX appr_ticket_idx ON approval(ticket);
CREATE INDEX appr_status_idx ON approval(status);
+CREATE TABLE approved (
+ id timeuuid, // unique Key
+ user varchar, // the user who needs to be approved
+ approver varchar, // user approving
+ type varchar, // approver types i.e. Supervisor, Owner
+ status varchar, // approval status. pending, approved, denied
+ memo varchar, // Text for Approval to know what's going on
+ operation varchar, // List operation to perform
+ PRIMARY KEY(id)
+ );
+CREATE INDEX approved_approver_idx ON approved(approver);
+CREATE INDEX approved_user_idx ON approved(user);
+
CREATE TABLE delegate (
user varchar,
delegate varchar,
@@ -231,6 +212,49 @@ CREATE TABLE delegate (
);
CREATE INDEX delg_delg_idx ON delegate(delegate);
+// OAuth Tokens
+CREATE TABLE oauth_token (
+ id text, // Reference
+ client_id text, // Creating Client ID
+ user text, // User requesting
+ active boolean, // Active or not
+ type int, // Type of Token
+ refresh text, // Refresh Token
+ expires timestamp, // Expiration time/Date (signed long)
+ exp_sec bigint, // Seconds from Jan 1, 1970
+ content text, // Content of Token
+ scopes Set<text>, // Scopes
+ state text, // Context string (Optional)
+ req_ip text, // Requesting IP (for logging purpose)
+ PRIMARY KEY(id)
+) with default_time_to_live = 21600; // 6 hours
+CREATE INDEX oauth_token_user_idx ON oauth_token(user);
+
+CREATE TABLE locate (
+ name text, // Component/Server name
+ hostname text, // FQDN of Service/Component
+ port int, // Port of Service
+ major int, // Version, Major
+ minor int, // Version, Minor
+ patch int, // Version, Patch
+ pkg int, // Version, Package (if available)
+ latitude float, // Latitude
+ longitude float, // Longitude
+ protocol text, // Protocol (i.e. http https)
+ subprotocol set<text>, // Accepted SubProtocols, ie. TLS1.1 for https
+ port_key uuid, // Key into locate_ports
+ PRIMARY KEY(name,hostname,port)
+) with default_time_to_live = 1200; // 20 mins
+
+CREATE TABLE locate_ports (
+ id uuid, // Id into locate
+ port int, // SubPort
+ name text, // Name of Other Port
+ protocol text, // Protocol of Other (i.e. JMX, DEBUG)
+ subprotocol set<text>, // Accepted sub protocols or versions
+ PRIMARY KEY(id, port)
+) with default_time_to_live = 1200; // 20 mins;
+
//
// Used by authz-batch processes to ensure only 1 runs at a time
//
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql
new file mode 100644
index 0000000000..52dc5ea77e
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql
@@ -0,0 +1,11 @@
+// For Developer Machine single instance
+// CREATE KEYSPACE authz
+// WITH REPLICATION = {'class' : 'SimpleStrategy','replication_factor':1};
+//
+//
+
+// Example of Network Topology, with Datacenter dc1 & dc2
+// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'dc1': '2', 'dc2': '2' };
+// Out of the box Docker Cassandra comes with "datacenter1", one instance
+CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'datacenter1': '1' };
+//
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql
new file mode 100644
index 0000000000..e7385ab69d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql
@@ -0,0 +1,122 @@
+USE authz;
+
+// Create 'org' root NS
+INSERT INTO ns (name,description,parent,scope,type)
+ VALUES('org','Root Namespace','.',1,1);
+
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org','admin',{'org.access|*|*'},'Org Admins');
+
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org','owner',{'org.access|*|read,approve'},'Org Owners');
+
+INSERT INTO perm(ns, type, instance, action, roles, description)
+ VALUES ('org','access','*','read,approve',{'org.owner'},'Org Read Access');
+
+INSERT INTO perm(ns, type, instance, action, roles, description)
+ VALUES ('org','access','*','*',{'org.admin'},'Org Write Access');
+
+// Create Root pass
+INSERT INTO cred (id,ns,type,cred,expires)
+ VALUES ('initial@osaaf.org','org.osaaf',1,0x008c5926ca861023c1d2a36653fd88e2,'2099-12-31') using TTL 14400;
+
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('initial@osaaf.org','org.admin','2099-12-31','org','admin') using TTL 14400;
+
+
+// Create org.osaaf
+INSERT INTO ns (name,description,parent,scope,type)
+ VALUES('org.osaaf','OSAAF Namespace','org',2,2);
+
+INSERT INTO role(ns, name, perms,description)
+ VALUES('org.osaaf','admin',{'org.osaaf.access|*|*'},'OSAAF Admins');
+
+INSERT INTO perm(ns, type, instance, action, roles,description)
+ VALUES ('org.osaaf','access','*','*',{'org.osaaf.admin'},'OSAAF Write Access');
+
+INSERT INTO role(ns, name, perms,description)
+ VALUES('org.osaaf','owner',{'org.osaaf.access|*|read,approve'},'OSAAF Owners');
+
+INSERT INTO perm(ns, type, instance, action, roles,description)
+ VALUES ('org.osaaf','access','*','read,appove',{'org.osaaf.owner'},'OSAAF Read Access');
+
+// Create org.osaaf.aaf
+INSERT INTO ns (name,description,parent,scope,type)
+ VALUES('org.osaaf.aaf','Application Authorization Framework','org.osaaf',3,3);
+
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.osaaf.aaf','admin',{'org.osaaf.aaf.access|*|*'},'AAF Admins');
+
+INSERT INTO perm(ns, type, instance, action, roles, description)
+ VALUES ('org.osaaf.aaf','access','*','*',{'org.osaaf.aaf.admin'},'AAF Write Access');
+
+INSERT INTO perm(ns, type, instance, action, roles, description)
+ VALUES ('org.osaaf.aaf','access','*','read,approve',{'org.osaaf.aaf.owner'},'AAF Read Access');
+
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.osaaf.aaf','owner',{'org.osaaf.aaf.access|*|read,approve'},'AAF Owners');
+
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('initial@osaaf.org','org.osaaf.aaf.admin','2099-12-31','org.osaaf.aaf','admin') using TTL 14400;
+
+
+// ONAP Specific Entities
+// ONAP initial env Namespace
+INSERT INTO ns (name,description,parent,scope,type)
+ VALUES('org.onap','ONAP','org',2,2);
+
+INSERT INTO ns (name,description,parent,scope,type)
+ VALUES('org.onap.portal','ONAP Portal','org.onap.portal',3,3);
+
+INSERT INTO perm(ns, type, instance, action, roles, description)
+ VALUES ('org.onap.portal','access','*','read',{
+ 'org.onap.portal.owner','org.onap.portal.designer','org.onap.portal.tester','org.onap.portal.ops','org.onap.portal.governor'
+ },'Portal Read Access');
+
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.onap.portal','owner',{'org.onap.portal.access|*|read'},'Portal Owner');
+
+INSERT INTO perm(ns, type, instance, action, roles, description)
+ VALUES ('org.onap.portal','access','*','*',{'org.onap.portal.admin'},'Portal Write Access');
+
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.onap.portal','admin',{'org.onap.portal.access|*|*'},'Portal Admins');
+
+// DEMO ID (OPS)
+insert into cred (id,type,expires,cred,notes,ns,other) values('demo@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344);
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('demo@people.osaaf.org','org.onap.portal.admin','2018-10-31','org.onap.portal','admin');
+
+// ADMIN
+insert into cred (id,type,expires,cred,notes,ns,other) values('jh0003@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344);
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('jh0003@people.osaaf.org','org.onap.portal.admin','2018-10-31','org.onap.portal','admin');
+
+// DESIGNER
+INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('cs0008@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344);
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.onap.portal','designer',{'org.onap.portal.access|*|read'},'Portal Designer');
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('cs0008@people.osaaf.org','org.onap.portal.designer','2018-10-31','org.onap.portal','designer');
+
+// TESTER
+INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('jm0007@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344);
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.onap.portal','tester',{'org.onap.portal.access|*|read'},'Portal Tester');
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('jm0007@people.osaaf.org','org.onap.portal.tester','2018-10-31','org.onap.portal','tester');
+
+// OPS
+INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('op0001@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344);
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.onap.portal','ops',{'org.onap.portal.access|*|read'},'Portal Operations');
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('op0001@people.osaaf.org','org.onap.portal.ops','2018-10-31','org.onap.portal','ops');
+
+// GOVERNOR
+INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('gv0001@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344);
+INSERT INTO role(ns, name, perms, description)
+ VALUES('org.onap.portal','governor',{'org.onap.portal.access|*|read'},'Portal Governor');
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('gv0001@people.osaaf.org','org.onap.portal.governor','2018-10-31','org.onap.portal','governor');
+
diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql
new file mode 100644
index 0000000000..5e7cfe1741
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql
@@ -0,0 +1,8 @@
+USE authz;
+
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('demo@people.osaaf.org','org.admin','2099-12-31','org','admin') ;
+
+INSERT INTO user_role(user,role,expires,ns,rname)
+ VALUES ('demo@people.osaaf.org','org.osaaf.aaf.admin','2099-12-31','org.osaaf.aaf','admin') ;
+
diff --git a/kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml
index 15e574f511..4253d2fb71 100644
--- a/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml
+++ b/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml
@@ -24,14 +24,11 @@ metadata:
heritage: {{ .Release.Service }}
spec:
replicas: {{ .Values.replicaCount }}
- selector:
- matchLabels:
- app: {{ include "common.name" . }}
template:
metadata:
labels:
app: {{ include "common.name" . }}
- name: {{ .Release.Name }}
+ release: {{ .Release.Name }}
spec:
hostname: {{ include "common.name" . }}
containers:
@@ -39,24 +36,45 @@ spec:
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
name: {{ include "common.name" . }}
+ ports:
+ - containerPort: {{ .Values.service.externalPort }}
+ - containerPort: {{ .Values.service.externalPort2 }}
+ - containerPort: {{ .Values.service.externalPort3 }}
+ - containerPort: {{ .Values.service.externalPort4 }}
volumeMounts:
- mountPath: /data
name: aaf-cs-data
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
# disable liveness probe when breakpoints set in debugger
# so K8s doesn't restart unresponsive container
{{- if eq .Values.liveness.enabled true }}
livenessProbe:
tcpSocket:
- port: {{ .Values.service.internalPort }}
+ port: {{ .Values.service.internalPort3 }}
initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
periodSeconds: {{ .Values.liveness.periodSeconds }}
{{ end -}}
readinessProbe:
tcpSocket:
- port: {{ .Values.service.internalPort }}
+ port: {{ .Values.service.internalPort3 }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
- resources:
+ lifecycle:
+ postStart:
+ exec:
+ command:
+ - /bin/sh
+ - -c
+ - >
+ /bin/sleep 30;
+ cd /data/;
+ cqlsh -u root -p root -f keyspace.cql ;
+ cqlsh -u root -p root -f init.cql ;
+ cqlsh -u root -p root -f osaaf.cql ;
+ cqlsh -u root -p root -f temp_identity.cql
+ resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
nodeSelector:
@@ -66,8 +84,10 @@ spec:
affinity:
{{ toYaml .Values.affinity | indent 10 }}
{{- end }}
-
volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
- name: aaf-cs-data
secret:
secretName: {{ include "common.fullname" . }}
diff --git a/kubernetes/aaf/charts/aaf-cs/templates/service.yaml b/kubernetes/aaf/charts/aaf-cs/templates/service.yaml
index 2e4a619a20..b1716e4936 100644
--- a/kubernetes/aaf/charts/aaf-cs/templates/service.yaml
+++ b/kubernetes/aaf/charts/aaf-cs/templates/service.yaml
@@ -22,6 +22,8 @@ metadata:
chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
+# annotations:
+# service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
spec:
type: {{ .Values.service.type }}
ports:
@@ -30,29 +32,29 @@ spec:
#Example internal target port if required
#targetPort: {{ .Values.service.internalPort }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.name }}
+ name: {{ .Values.service.portName }}
- port: {{ .Values.service.externalPort2 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
- name: {{ .Values.service.name }}2
+ name: {{ .Values.service.portName }}2
- port: {{ .Values.service.externalPort3 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }}
- name: {{ .Values.service.name }}3
+ name: {{ .Values.service.portName }}3
- port: {{ .Values.service.externalPort4 }}
nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort4 }}
- name: {{ .Values.service.name }}4
+ name: {{ .Values.service.portName }}4
{{- else -}}
- port: {{ .Values.service.externalPort }}
targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ name: {{ .Values.service.portName }}
- port: {{ .Values.service.externalPort2 }}
targetPort: {{ .Values.service.internalPort2 }}
- name: {{ .Values.service.name }}2
+ name: {{ .Values.service.portName }}2
- port: {{ .Values.service.externalPort3 }}
targetPort: {{ .Values.service.internalPort3 }}
- name: {{ .Values.service.name }}3
+ name: {{ .Values.service.portName }}3
- port: {{ .Values.service.externalPort4 }}
targetPort: {{ .Values.service.internalPort4 }}
- name: {{ .Values.service.name }}4
+ name: {{ .Values.service.portName }}4
{{- end}}
selector:
app: {{ include "common.name" . }}
diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml
index 89b83cd169..83bc972fd8 100644
--- a/kubernetes/aaf/charts/aaf-cs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cs/values.yaml
@@ -25,7 +25,7 @@ global:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: library/cassandra:2.1.17
+image: library/cassandra:3.11
pullPolicy: Always
# flag to enable debugging - application support required
@@ -54,8 +54,9 @@ readiness:
periodSeconds: 10
service:
+ name: aaf-cass
type: ClusterIP
- name: aaf-cs
+ portName: aaf-cs
#targetPort
internalPort: 7000
#port
diff --git a/kubernetes/aaf/charts/aaf-fs/.helmignore b/kubernetes/aaf/charts/aaf-fs/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-fs/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/aaf/charts/aaf-fs/Chart.yaml b/kubernetes/aaf/charts/aaf-fs/Chart.yaml
new file mode 100644
index 0000000000..6b0fdcb6fd
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-fs/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF File Server
+name: aaf-fs
+version: 2.0.0 \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml
new file mode 100644
index 0000000000..0bbd6a5a36
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ - --container-name
+ - aaf-locate
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c","echo hello >> /opt/app/osaaf/logs/fs/stdout`date -I`;ln -s /opt/app/osaaf/data /data;/opt/app/aaf/fs/bin/fs >> /opt/app/osaaf/logs/fs/stdout`date -I` 2>> /opt/app/osaaf/logs/fs/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-fs/templates/service.yaml b/kubernetes/aaf/charts/aaf-fs/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-fs/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml
new file mode 100644
index 0000000000..be0f53d566
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-fs/values.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_fs:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-fs
+ type: ClusterIP
+ portName: aaf-fs
+ #targetPort
+ internalPort: 8096
+ #port
+ externalPort: 8096
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-gui/.helmignore b/kubernetes/aaf/charts/aaf-gui/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-gui/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/aaf/charts/aaf-gui/Chart.yaml b/kubernetes/aaf/charts/aaf-gui/Chart.yaml
new file mode 100644
index 0000000000..d0aea0b0e0
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-gui/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF GUI
+name: aaf-gui
+version: 2.0.0 \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml
new file mode 100644
index 0000000000..ee503caceb
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ - --container-name
+ - aaf-locate
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/gui/bin/gui >> /opt/app/osaaf/logs/gui/stdout`date -I` 2>> /opt/app/osaaf/logs/gui/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-gui/templates/service.yaml b/kubernetes/aaf/charts/aaf-gui/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-gui/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-gui/values.yaml b/kubernetes/aaf/charts/aaf-gui/values.yaml
new file mode 100644
index 0000000000..02c572fe88
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-gui/values.yaml
@@ -0,0 +1,87 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_gui:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-gui
+ type: NodePort
+ portName: aaf-gui
+ #targetPort
+ internalPort: 8200
+ #port
+ externalPort: 8200
+ nodePort: 51
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-hello/.helmignore b/kubernetes/aaf/charts/aaf-hello/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-hello/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/aaf/charts/aaf-hello/Chart.yaml b/kubernetes/aaf/charts/aaf-hello/Chart.yaml
new file mode 100644
index 0000000000..c4029ba80f
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-hello/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF Hello
+name: aaf-hello
+version: 2.0.0 \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml
new file mode 100644
index 0000000000..b47d878f25
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ - --container-name
+ - aaf-locate
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/hello/bin/hello >> /opt/app/osaaf/logs/hello/stdout`date -I` 2>> /opt/app/osaaf/logs/hello/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-hello/templates/service.yaml b/kubernetes/aaf/charts/aaf-hello/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-hello/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml
new file mode 100644
index 0000000000..ad95b071c1
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-hello/values.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_hello:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-hello
+ type: ClusterIP
+ portName: aaf-hello
+ #targetPort
+ internalPort: 8130
+ #port
+ externalPort: 8130
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-locate/.helmignore b/kubernetes/aaf/charts/aaf-locate/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-locate/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/aaf/charts/aaf-locate/Chart.yaml b/kubernetes/aaf/charts/aaf-locate/Chart.yaml
new file mode 100644
index 0000000000..db50ec392a
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-locate/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF Locate
+name: aaf-locate
+version: 2.0.0 \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-locate/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-locate/templates/deployment.yaml
new file mode 100644
index 0000000000..de5a46ec5b
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-locate/templates/deployment.yaml
@@ -0,0 +1,112 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/locate/bin/locate >> /opt/app/osaaf/logs/locate/stdout`date -I` 2>> /opt/app/osaaf/logs/locate/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-locate/templates/service.yaml b/kubernetes/aaf/charts/aaf-locate/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-locate/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml
new file mode 100644
index 0000000000..fbed947ca0
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-locate/values.yaml
@@ -0,0 +1,90 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+# If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines.
+# persistence:
+# mountPath: /dockerdata
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_locate:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-locate
+ type: ClusterIP
+ portName: aaf-locate
+ #targetPort
+ internalPort: 8095
+ #port
+ externalPort: 8095
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-oauth/.helmignore b/kubernetes/aaf/charts/aaf-oauth/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-oauth/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/aaf/charts/aaf-oauth/Chart.yaml b/kubernetes/aaf/charts/aaf-oauth/Chart.yaml
new file mode 100644
index 0000000000..bcb135b1e0
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-oauth/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF OAuth
+name: aaf-oauth
+version: 2.0.0 \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt
new file mode 100644
index 0000000000..c60c745ca3
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml
new file mode 100644
index 0000000000..00d6ee0e59
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ - --container-name
+ - aaf-locate
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/oauth/bin/oauth >> /opt/app/osaaf/logs/oauth/stdout`date -I` 2>> /opt/app/osaaf/logs/oauth/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-oauth/templates/service.yaml b/kubernetes/aaf/charts/aaf-oauth/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-oauth/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml
new file mode 100644
index 0000000000..43116965be
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_oauth:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-oauth
+ type: ClusterIP
+ portName: aaf-oauth
+ #targetPort
+ internalPort: 8140
+ #port
+ externalPort: 8140
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-service/Chart.yaml b/kubernetes/aaf/charts/aaf-service/Chart.yaml
new file mode 100644
index 0000000000..3461f1add1
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-service/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP AAF Service
+name: aaf-service
+version: 2.0.0
diff --git a/kubernetes/aaf/charts/aaf-service/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-service/templates/deployment.yaml
new file mode 100644
index 0000000000..9fd6eba534
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-service/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/job_complete.py
+ args:
+ - -j
+ - {{ .Release.Name }}-aaf-create-config
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-job-complete
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - aaf-cs
+ - --container-name
+ - aaf-locate
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - env:
+ - name: CASSANDRA_CLUSTER
+ value: cassandra_container
+ name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/service/bin/service >> /opt/app/osaaf/logs/service/stdout`date -I` 2>> /opt/app/osaaf/logs/service/stderr`date -I`"]
+ volumeMounts:
+ - mountPath: /opt/app/osaaf
+ name: aaf-persistent-vol
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: aaf-persistent-vol
+ {{- if .Values.global.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ .Release.Name }}-aaf-pvc
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/aaf/charts/aaf-service/templates/service.yaml b/kubernetes/aaf/charts/aaf-service/templates/service.yaml
new file mode 100644
index 0000000000..281aa1cc8d
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-service/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}
diff --git a/kubernetes/aaf/charts/aaf-service/values.yaml b/kubernetes/aaf/charts/aaf-service/values.yaml
new file mode 100644
index 0000000000..b53e7a2963
--- /dev/null
+++ b/kubernetes/aaf/charts/aaf-service/values.yaml
@@ -0,0 +1,87 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aaf/aaf_service:2.1.0-SNAPSHOT
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ name: aaf-service
+ type: NodePort
+ portName: aaf-service
+ #targetPort
+ internalPort: 8100
+ #port
+ externalPort: 8100
+ nodePort: 47
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
index d09d492137..bb0f470d88 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
@@ -29,7 +29,7 @@ global:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient
+image: onap/aaf/smsquorumclient:latest
pullPolicy: Always
# flag to enable debugging - application support required
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
index 26f03044ac..ddfc7c61d0 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
@@ -75,4 +75,5 @@ spec:
- name: localtime
hostPath:
path: /etc/localtime
-
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key" \ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
index 07b8c33226..53e7286583 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
@@ -21,10 +21,10 @@ global:
persistence: {}
# application image
-repository: docker.io
+repository: nexus3.onap.org:10001
image:
- consul: consul:1.0.6
- vault: vault:0.10.0
+ consul: library/consul:1.0.6
+ vault: library/vault:0.10.0
pullPolicy: Always
# flag to enable debugging - application support required
diff --git a/kubernetes/aaf/charts/aaf-sms/values.yaml b/kubernetes/aaf/charts/aaf-sms/values.yaml
index cd3253941d..0686ddb95b 100644
--- a/kubernetes/aaf/charts/aaf-sms/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/values.yaml
@@ -29,7 +29,7 @@ global:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms
+image: onap/aaf/sms:latest
pullPolicy: Always
# flag to enable debugging - application support required