diff options
Diffstat (limited to 'docs/oom_quickstart_guide.rst')
-rw-r--r-- | docs/oom_quickstart_guide.rst | 284 |
1 files changed, 0 insertions, 284 deletions
diff --git a/docs/oom_quickstart_guide.rst b/docs/oom_quickstart_guide.rst deleted file mode 100644 index b7749b1056..0000000000 --- a/docs/oom_quickstart_guide.rst +++ /dev/null @@ -1,284 +0,0 @@ -.. This work is licensed under a -.. Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. Copyright 2019-2020 Amdocs, Bell Canada, Orange, Samsung -.. _oom_quickstart_guide: -.. _quick-start-label: - -OOM Quick Start Guide -##################### - -.. figure:: images/oom_logo/oomLogoV2-medium.png - :align: right - -Once a Kubernetes environment is available (follow the instructions in -:ref:`cloud-setup-guide-label` if you don't have a cloud environment -available), follow the following instructions to deploy ONAP. - -**Step 1.** Clone the OOM repository from ONAP gerrit:: - - > git clone -b <BRANCH> http://gerrit.onap.org/r/oom --recurse-submodules - > cd oom/kubernetes - -where <BRANCH> can be an official release tag, such as - -* 4.0.0-ONAP for Dublin -* 5.0.1-ONAP for El Alto -* 6.0.0 for Frankfurt -* 7.0.0 for Guilin -* 8.0.0 for Honolulu -* 9.0.0 for Istanbul -* 10.0.0 for Jakarta -* 11.0.0 for Kohn - -**Step 2.** Install Helm Plugins required to deploy ONAP:: - - > cp -R ~/oom/kubernetes/helm/plugins/ ~/.local/share/helm/plugins - > helm plugin install https://github.com/chartmuseum/helm-push.git \ - --version 0.9.0 - -.. note:: - The ``--version 0.9.0`` is required as new version of helm (3.7.0 and up) is - now using ``push`` directly and helm-push is using ``cm-push`` starting - version ``0.10.0`` and up. - -**Step 3.** Install Chartmuseum:: - - > curl -LO https://s3.amazonaws.com/chartmuseum/release/latest/bin/linux/amd64/chartmuseum - > chmod +x ./chartmuseum - > mv ./chartmuseum /usr/local/bin - -**Step 4.** Install Cert-Manager:: - - > kubectl apply -f https://github.com/jetstack/cert-manager/releases/download/v1.2.0/cert-manager.yaml - -More details can be found :doc:`here <oom_setup_paas>`. - -**Step 4.1** Install Strimzi Kafka Operator: - -- Add the helm repo:: - - > helm repo add strimzi https://strimzi.io/charts/ - -- Install the operator:: - - > helm install strimzi-kafka-operator strimzi/strimzi-kafka-operator --namespace strimzi-system --version 0.28.0 --set watchAnyNamespace=true --create-namespace - -More details can be found :doc:`here <oom_setup_paas>`. - -**Step 5.** Customize the Helm charts like `oom/kubernetes/onap/values.yaml` or -an override file like `onap-all.yaml`, `onap-vfw.yaml` or `openstack.yaml` file -to suit your deployment with items like the OpenStack tenant information. - -.. note:: - Standard and example override files (e.g. `onap-all.yaml`, `openstack.yaml`) - can be found in the `oom/kubernetes/onap/resources/overrides/` directory. - - - a. You may want to selectively enable or disable ONAP components by changing - the ``enabled: true/false`` flags. - - - b. Encrypt the OpenStack password using the shell tool for Robot and put it in - the Robot Helm charts or Robot section of `openstack.yaml` - - - c. Encrypt the OpenStack password using the java based script for SO Helm - charts or SO section of `openstack.yaml`. - - - d. Update the OpenStack parameters that will be used by Robot, SO and APPC Helm - charts or use an override file to replace them. - - e. Add in the command line a value for the global master password - (global.masterPassword). - - - -a. Enabling/Disabling Components: -Here is an example of the nominal entries that need to be provided. -We have different values file available for different contexts. - -.. literalinclude:: ../kubernetes/onap/values.yaml - :language: yaml - - -b. Generating ROBOT Encrypted Password: -The Robot encrypted Password uses the same encryption.key as SO but an -openssl algorithm that works with the python based Robot Framework. - -.. note:: - To generate Robot ``openStackEncryptedPasswordHere``:: - - cd so/resources/config/mso/ - /oom/kubernetes/so/resources/config/mso# echo -n "<openstack tenant password>" | openssl aes-128-ecb -e -K `cat encryption.key` -nosalt | xxd -c 256 -p`` - -c. Generating SO Encrypted Password: -The SO Encrypted Password uses a java based encryption utility since the -Java encryption library is not easy to integrate with openssl/python that -Robot uses in Dublin and upper versions. - -.. note:: - To generate SO ``openStackEncryptedPasswordHere`` and ``openStackSoEncryptedPassword`` - ensure `default-jdk` is installed:: - - apt-get update; apt-get install default-jdk - - Then execute:: - - SO_ENCRYPTION_KEY=`cat ~/oom/kubernetes/so/resources/config/mso/encryption.key` - OS_PASSWORD=XXXX_OS_CLEARTESTPASSWORD_XXXX - - git clone http://gerrit.onap.org/r/integration - cd integration/deployment/heat/onap-rke/scripts - - javac Crypto.java - java Crypto "$OS_PASSWORD" "$SO_ENCRYPTION_KEY" - -d. Update the OpenStack parameters: - -There are assumptions in the demonstration VNF Heat templates about the -networking available in the environment. To get the most value out of these -templates and the automation that can help confirm the setup is correct, please -observe the following constraints. - - -``openStackPublicNetId:`` - This network should allow Heat templates to add interfaces. - This need not be an external network, floating IPs can be assigned to the - ports on the VMs that are created by the heat template but its important that - neutron allow ports to be created on them. - -``openStackPrivateNetCidr: "10.0.0.0/16"`` - This ip address block is used to assign OA&M addresses on VNFs to allow ONAP - connectivity. The demonstration Heat templates assume that 10.0 prefix can be - used by the VNFs and the demonstration ip addressing plan embodied in the - preload template prevent conflicts when instantiating the various VNFs. If - you need to change this, you will need to modify the preload data in the - Robot Helm chart like integration_preload_parameters.py and the - demo/heat/preload_data in the Robot container. The size of the CIDR should - be sufficient for ONAP and the VMs you expect to create. - -``openStackOamNetworkCidrPrefix: "10.0"`` - This ip prefix mush match the openStackPrivateNetCidr and is a helper - variable to some of the Robot scripts for demonstration. A production - deployment need not worry about this setting but for the demonstration VNFs - the ip asssignment strategy assumes 10.0 ip prefix. - -Example Keystone v2.0 - -.. literalinclude:: yaml/example-integration-override.yaml - :language: yaml - -Example Keystone v3 (required for Rocky and later releases) - -.. literalinclude:: yaml/example-integration-override-v3.yaml - :language: yaml - - -**Step 6.** To setup a local Helm server to server up the ONAP charts:: - - > chartmuseum --storage local --storage-local-rootdir ~/helm3-storage -port 8879 & - -Note the port number that is listed and use it in the Helm repo add as -follows:: - - > helm repo add local http://127.0.0.1:8879 - -**Step 7.** Verify your Helm repository setup with:: - - > helm repo list - NAME URL - local http://127.0.0.1:8879 - -**Step 8.** Build a local Helm repository (from the kubernetes directory):: - - > make SKIP_LINT=TRUE [HELM_BIN=<HELM_PATH>] all ; make SKIP_LINT=TRUE [HELM_BIN=<HELM_PATH>] onap - -`HELM_BIN` - Sets the helm binary to be used. The default value use helm from PATH - - -**Step 9.** Display the onap charts that available to be deployed:: - - > helm repo update - > helm search repo onap - -.. literalinclude:: helm/helm-search.txt - -.. note:: - The setup of the Helm repository is a one time activity. If you make changes - to your deployment charts or values be sure to use ``make`` to update your - local Helm repository. - -**Step 10.** Once the repo is setup, installation of ONAP can be done with a -single command - -.. note:: - The ``--timeout 900s`` is currently required in Dublin and later - versions up to address long running initialization tasks for DMaaP - and SO. Without this timeout value both applications may fail to - deploy. - -.. danger:: - We've added the master password on the command line. - You shouldn't put it in a file for safety reason - please don't forget to change the value to something random - - A space is also added in front of the command so "history" doesn't catch it. - This masterPassword is very sensitive, please be careful! - - -To deploy all ONAP applications use this command:: - - > cd oom/kubernetes - > helm deploy dev local/onap --namespace onap --create-namespace --set global.masterPassword=myAwesomePasswordThatINeedToChange -f onap/resources/overrides/onap-all.yaml -f onap/resources/overrides/environment.yaml -f onap/resources/overrides/openstack.yaml --timeout 900s - -All override files may be customized (or replaced by other overrides) as per -needs. - -`onap-all.yaml` - Enables the modules in the ONAP deployment. As ONAP is very modular, it is - possible to customize ONAP and disable some components through this - configuration file. - -`onap-all-ingress-nginx-vhost.yaml` - Alternative version of the `onap-all.yaml` but with global ingress controller - enabled. It requires the cluster configured with the nginx ingress controller - and load balancer. Please use this file instead `onap-all.yaml` if you want - to use experimental ingress controller feature. - -`environment.yaml` - Includes configuration values specific to the deployment environment. - - Example: adapt readiness and liveness timers to the level of performance of - your infrastructure - -`openstack.yaml` - Includes all the OpenStack related information for the default target tenant - you want to use to deploy VNFs from ONAP and/or additional parameters for the - embedded tests. - -**Step 11.** Verify ONAP installation - -Use the following to monitor your deployment and determine when ONAP is ready -for use:: - - > kubectl get pods -n onap -o=wide - -.. note:: - While all pods may be in a Running state, it is not a guarantee that all - components are running fine. - - Launch the healthcheck tests using Robot to verify that the components are - healthy:: - - > ~/oom/kubernetes/robot/ete-k8s.sh onap health - -**Step 12.** Undeploy ONAP -:: - - > helm undeploy dev - -More examples of using the deploy and undeploy plugins can be found here: -https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins |