aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/oom_quickstart_guide.rst6
-rw-r--r--docs/release-notes.rst45
-rw-r--r--kubernetes/a1policymanagement/templates/deployment.yaml16
-rw-r--r--kubernetes/a1policymanagement/templates/pv.yaml42
-rw-r--r--kubernetes/a1policymanagement/templates/pvc.yaml41
-rw-r--r--kubernetes/a1policymanagement/values.yaml29
-rw-r--r--kubernetes/aaf/components/aaf-cass/values.yaml2
-rw-r--r--kubernetes/aai/components/aai-resources/resources/config/application-keycloak.properties6
-rw-r--r--kubernetes/aai/components/aai-resources/values.yaml14
-rw-r--r--kubernetes/aai/components/aai-traversal/resources/config/application-keycloak.properties13
-rw-r--r--kubernetes/aai/components/aai-traversal/templates/configmap.yaml1
-rw-r--r--kubernetes/aai/components/aai-traversal/templates/deployment.yaml3
-rw-r--r--kubernetes/aai/components/aai-traversal/values.yaml16
-rw-r--r--kubernetes/appc/components/appc-cdt/values.yaml32
-rwxr-xr-xkubernetes/appc/resources/config/appc/opt/onap/appc/bin/health_check.sh2
-rwxr-xr-xkubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh6
-rw-r--r--kubernetes/appc/values.yaml1
-rwxr-xr-xkubernetes/cds/components/cds-blueprints-processor/templates/deployment.yaml10
-rwxr-xr-xkubernetes/cds/components/cds-blueprints-processor/values.yaml13
-rwxr-xr-xkubernetes/cds/components/cds-command-executor/values.yaml2
-rwxr-xr-xkubernetes/cds/components/cds-py-executor/values.yaml2
-rw-r--r--kubernetes/cds/components/cds-sdc-listener/values.yaml2
-rw-r--r--kubernetes/cds/components/cds-ui/values.yaml2
-rw-r--r--kubernetes/cds/values.yaml120
-rw-r--r--kubernetes/common/cassandra/resources/restore.sh2
-rw-r--r--kubernetes/common/cassandra/templates/statefulset.yaml11
-rw-r--r--kubernetes/common/cassandra/values.yaml17
-rwxr-xr-xkubernetes/common/cert-wrapper/resources/import-custom-certs.sh20
-rw-r--r--kubernetes/common/certInitializer/resources/ingress/onboard.sh35
-rw-r--r--kubernetes/common/certInitializer/resources/retrieval/retrieval_check.sh (renamed from kubernetes/common/certInitializer/resources/retrieval_check.sh)3
-rw-r--r--kubernetes/common/certInitializer/resources/retrieval/tls_certs_configure.sh32
-rw-r--r--kubernetes/common/certInitializer/templates/_certInitializer.yaml26
-rw-r--r--kubernetes/common/certInitializer/templates/configmap.yaml15
-rw-r--r--kubernetes/common/certInitializer/templates/job.yaml44
-rw-r--r--kubernetes/common/certInitializer/values.yaml11
-rw-r--r--kubernetes/common/certManagerCertificate/requirements.yaml3
-rw-r--r--kubernetes/common/certManagerCertificate/templates/_certificate.tpl75
-rw-r--r--kubernetes/common/cmpv2Certificate/requirements.yaml3
-rw-r--r--kubernetes/common/cmpv2Certificate/templates/_certServiceClient.tpl31
-rw-r--r--kubernetes/common/cmpv2Certificate/values.yaml35
-rw-r--r--kubernetes/common/cmpv2Config/values.yaml34
-rw-r--r--kubernetes/common/mariadb-galera/templates/statefulset.yaml18
-rw-r--r--kubernetes/common/mariadb-galera/values.yaml35
-rwxr-xr-xkubernetes/common/music/resources/config/startup.sh4
-rw-r--r--kubernetes/common/music/values.yaml3
-rw-r--r--kubernetes/common/repositoryGenerator/templates/_repository.tpl5
-rw-r--r--kubernetes/common/repositoryGenerator/values.yaml4
-rwxr-xr-xkubernetes/contrib/dns-server-for-vhost-ingress-testing/deploy_dns.sh4
-rwxr-xr-xkubernetes/contrib/metallb-loadbalancer-inst/install-metallb-on-cluster.sh2
-rwxr-xr-xkubernetes/contrib/tools/check-for-staging-images.sh2
-rwxr-xr-xkubernetes/contrib/tools/rke/rke_setup.sh10
-rwxr-xr-xkubernetes/cps/resources/config/application-helm.yml (renamed from kubernetes/cps/resources/config/application.yml)8
-rwxr-xr-xkubernetes/cps/templates/deployment.yaml7
-rwxr-xr-xkubernetes/cps/values.yaml8
-rw-r--r--kubernetes/dcaegen2-services/common/dcaegen2-services-common/templates/_deployment.tpl179
-rw-r--r--kubernetes/dcaegen2-services/common/dcaegen2-services-common/values.yaml2
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/requirements.yaml4
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/templates/certificates.yaml19
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/values.yaml18
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-tcagen2/values.yaml13
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-ves-collector/requirements.yaml4
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-ves-collector/templates/certificates.yaml19
-rw-r--r--kubernetes/dcaegen2-services/components/dcae-ves-collector/values.yaml18
-rw-r--r--kubernetes/dcaegen2/components/dcae-cloudify-manager/resources/config/plugins/k8s-plugin.json20
-rw-r--r--kubernetes/dcaegen2/components/dcae-cloudify-manager/values.yaml2
-rw-r--r--kubernetes/dcaegen2/components/dcae-dashboard/values.yaml14
-rwxr-xr-xkubernetes/helm/plugins/deploy/deploy.sh46
-rwxr-xr-xkubernetes/helm/plugins/undeploy/undeploy.sh2
-rw-r--r--kubernetes/msb/components/msb-eag/values.yaml33
-rw-r--r--kubernetes/msb/components/msb-iag/values.yaml33
-rwxr-xr-xkubernetes/onap/values.yaml23
-rw-r--r--kubernetes/oof/components/oof-cmso/components/oof-cmso-optimizer/values.yaml4
-rw-r--r--kubernetes/oof/components/oof-cmso/components/oof-cmso-service/templates/deployment.yaml10
-rw-r--r--kubernetes/oof/components/oof-cmso/components/oof-cmso-service/values.yaml5
-rw-r--r--kubernetes/oof/components/oof-cmso/components/oof-cmso-ticketmgt/values.yaml2
-rw-r--r--kubernetes/oof/components/oof-cmso/components/oof-cmso-topology/values.yaml2
-rw-r--r--kubernetes/platform/components/cmpv2-cert-provider/values.yaml8
-rw-r--r--kubernetes/platform/components/oom-cert-service/Makefile183
-rw-r--r--kubernetes/platform/components/oom-cert-service/requirements.yaml6
-rw-r--r--kubernetes/platform/components/oom-cert-service/templates/certificate.yaml17
-rw-r--r--kubernetes/platform/components/oom-cert-service/templates/deployment.yaml4
-rw-r--r--kubernetes/platform/components/oom-cert-service/templates/issuer.yaml32
-rw-r--r--kubernetes/platform/components/oom-cert-service/templates/secret.yaml39
-rw-r--r--kubernetes/platform/components/oom-cert-service/values.yaml104
-rwxr-xr-xkubernetes/policy/components/policy-apex-pdp/values.yaml3
-rwxr-xr-xkubernetes/policy/components/policy-api/values.yaml4
-rwxr-xr-xkubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh2
-rw-r--r--kubernetes/policy/components/policy-clamp-be/values.yaml9
-rw-r--r--kubernetes/policy/components/policy-clamp-fe/values.yaml2
-rwxr-xr-xkubernetes/policy/components/policy-distribution/values.yaml3
-rwxr-xr-xkubernetes/policy/components/policy-drools-pdp/values.yaml3
-rwxr-xr-xkubernetes/policy/components/policy-pap/values.yaml4
-rwxr-xr-xkubernetes/policy/components/policy-xacml-pdp/values.yaml4
-rw-r--r--kubernetes/portal/components/portal-app/values.yaml7
-rw-r--r--kubernetes/portal/components/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh10
-rw-r--r--kubernetes/portal/components/portal-sdk/values.yaml7
-rwxr-xr-xkubernetes/robot/demo-k8s.sh2
-rwxr-xr-xkubernetes/robot/ete-k8s.sh4
-rwxr-xr-xkubernetes/robot/eteHelm-k8s.sh4
-rwxr-xr-xkubernetes/robot/instantiate-k8s.sh8
-rw-r--r--kubernetes/robot/values.yaml2
-rw-r--r--kubernetes/sdc/components/sdc-be/values.yaml10
-rw-r--r--kubernetes/sdc/components/sdc-cs/values.yaml4
-rw-r--r--kubernetes/sdc/components/sdc-fe/values.yaml8
-rw-r--r--kubernetes/sdc/components/sdc-helm-validator/Chart.yaml20
-rw-r--r--kubernetes/sdc/components/sdc-helm-validator/requirements.yaml23
-rw-r--r--kubernetes/sdc/components/sdc-helm-validator/templates/deployment.yaml44
-rw-r--r--kubernetes/sdc/components/sdc-helm-validator/templates/service.yaml19
-rw-r--r--kubernetes/sdc/components/sdc-helm-validator/values.yaml58
-rw-r--r--kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml2
-rw-r--r--kubernetes/sdc/components/sdc-onboarding-be/values.yaml10
-rw-r--r--kubernetes/sdc/components/sdc-wfd-be/values.yaml6
-rw-r--r--kubernetes/sdc/components/sdc-wfd-fe/values.yaml6
-rw-r--r--kubernetes/sdc/requirements.yaml4
-rw-r--r--kubernetes/sdc/values.yaml2
-rw-r--r--kubernetes/sdnc/components/dmaap-listener/values.yaml2
-rw-r--r--kubernetes/sdnc/components/sdnc-ansible-server/values.yaml2
-rwxr-xr-xkubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncActive.sh2
-rwxr-xr-xkubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncStandby.sh2
-rwxr-xr-xkubernetes/sdnc/components/sdnc-prom/resources/bin/prom.sh2
-rwxr-xr-xkubernetes/sdnc/components/sdnc-prom/resources/bin/switchVoting.sh2
-rw-r--r--kubernetes/sdnc/components/sdnc-web/values.yaml2
-rw-r--r--kubernetes/sdnc/components/ueb-listener/values.yaml2
-rw-r--r--kubernetes/sdnc/templates/service.yaml24
-rw-r--r--kubernetes/sdnc/templates/statefulset.yaml5
-rw-r--r--kubernetes/sdnc/values.yaml8
-rwxr-xr-xkubernetes/so/components/so-bpmn-infra/values.yaml2
-rwxr-xr-xkubernetes/so/components/so-catalog-db-adapter/values.yaml2
-rwxr-xr-xkubernetes/so/components/so-openstack-adapter/values.yaml2
-rwxr-xr-xkubernetes/so/components/so-request-db-adapter/values.yaml2
-rwxr-xr-xkubernetes/so/components/so-sdc-controller/values.yaml2
-rwxr-xr-xkubernetes/so/components/so-sdnc-adapter/values.yaml2
-rwxr-xr-xkubernetes/so/values.yaml2
-rw-r--r--kubernetes/vfc/values.yaml3
-rw-r--r--tox.ini4
135 files changed, 1547 insertions, 619 deletions
diff --git a/docs/oom_quickstart_guide.rst b/docs/oom_quickstart_guide.rst
index 5136e537f6..2fedc091d8 100644
--- a/docs/oom_quickstart_guide.rst
+++ b/docs/oom_quickstart_guide.rst
@@ -67,6 +67,12 @@ to suit your deployment with items like the OpenStack tenant information.
+.. note::
+ If you want to use CMPv2 certificate onboarding, Cert-Manager must be installed.
+ :doc:`Click here <oom_setup_paas>` to see how to install Cert-Manager.
+
+
+
a. Enabling/Disabling Components:
Here is an example of the nominal entries that need to be provided.
We have different values file available for different contexts.
diff --git a/docs/release-notes.rst b/docs/release-notes.rst
index d8e529a347..ae0ea457f5 100644
--- a/docs/release-notes.rst
+++ b/docs/release-notes.rst
@@ -42,7 +42,7 @@ Release Data
| **Release designation** | Honolulu |
| | |
+--------------------------------------+--------------------------------------+
-| **Release date** | 2020/12/03 |
+| **Release date** | 2021/04/29 |
| | |
+--------------------------------------+--------------------------------------+
@@ -52,18 +52,53 @@ New features
* Kubernetes support for version up to 1.20
* Helm support for version up to 3.5
* Limits are set for most of the components
+* Portal-Cassandra image updated to Bitnami, supporting IPv4/IPv6 Dual Stack
+* CMPv2 external issuer implemented which extends Cert-Manager with ability to
+ enroll X.509 certificates from CMPv2 servers
+* New version for mariadb galera using Bitnami image, supporting IPv4/IPv6 Dual
+ Stack
+* Bump version of common PostgreSQL and ElasticSearch
+* Move to automatic certificates retrieval for 80% of the components
+* Consistent retrieval of docker images, with ability to configure proxy for
+ the 4 repositories used by ONAP
**Bug fixes**
A list of issues resolved in this release can be found here:
-https://jira.onap.org/projects/OOM/versions/10826
+https://jira.onap.org/projects/OOM/versions/11073
-**Known Issues**
+major issues solved:
-- `<https://github.com/bitnami/bitnami-docker-mariadb-galera/issues/35>`_
- bitnami mariadb galera image doesn't support single quote in password.
+* Better handling of persistence on PostgreSQL
+* Better Ingress templating
+* Better Service templating
+**Known Issues**
+- `OOM-2554 <https://jira.onap.org/browse/OOM-2554>`_ Common pods have java 8
+- `OOM-2435 <https://jira.onap.org/browse/OOM-2435>`_ SDNC karaf shell:
+ log:list: Error executing command: Unrecognized configuration
+- `OOM-2629 <https://jira.onap.org/browse/OOM-2629>`_ NetBox demo entry setup
+ not complete
+- `OOM-2706 <https://jira.onap.org/browse/OOM-2706>`_ CDS Blueprint Processor
+ does not work with local DB
+- `OOM-2713 <https://jira.onap.org/browse/OOM-2713>`_ Problem on onboarding
+ custom cert to SDNC ONAP during deployment
+- `OOM-2698 <https://jira.onap.org/browse/OOM-2698>`_ SO helm override fails in
+ for value with multi-level replacement
+- `OOM-2697 <https://jira.onap.org/browse/OOM-2697>`_ SO with local MariaDB
+ deployment fails
+- `OOM-2538 <https://jira.onap.org/browse/OOM-2538>`_ strange error with
+ CertInitializer template
+- `OOM-2547 <https://jira.onap.org/browse/OOM-2547>`_ Health Check failures
+ seen after bringing down/up control plane & worker node VM instances on which
+ ONAP hosted
+- `OOM-2699 <https://jira.onap.org/browse/OOM-2699>`_ SO so-mariadb
+ readinessCheck fails for local MariaDB instance
+- `OOM-2705 <https://jira.onap.org/browse/OOM-2705>`_ SDNC DB installation fails
+ on local MariaDB instance
+- `OOM-2603 <https://jira.onap.org/browse/OOM-2603>`_ [SDNC] allign password for
+ scaleoutUser/restconfUser/odlUser
Deliverables
------------
diff --git a/kubernetes/a1policymanagement/templates/deployment.yaml b/kubernetes/a1policymanagement/templates/deployment.yaml
index 822c0e3cb1..0d8399c8b3 100644
--- a/kubernetes/a1policymanagement/templates/deployment.yaml
+++ b/kubernetes/a1policymanagement/templates/deployment.yaml
@@ -19,7 +19,14 @@
kind: Deployment
apiVersion: apps/v1
-metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ include "common.release" . }}"
+ heritage: "{{ .Release.Service }}"
spec:
replicas: {{ index .Values.replicaCount }}
selector: {{- include "common.selectors" . | nindent 4 }}
@@ -101,7 +108,9 @@ spec:
subPath: application_configuration.json
- name: config
mountPath: /opt/app/policy-agent/config/application.yaml
- subPath: application.yaml
+ subPath: application.yaml
+ - name: vardata
+ mountPath: "/var/policy-management-service/database"
resources: {{ include "common.resources" . | nindent 10 }}
volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
- name: {{ include "common.fullname" . }}-policy-conf-input
@@ -114,3 +123,6 @@ spec:
- name: config
emptyDir:
medium: Memory
+ - name: vardata
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
diff --git a/kubernetes/a1policymanagement/templates/pv.yaml b/kubernetes/a1policymanagement/templates/pv.yaml
new file mode 100644
index 0000000000..904d863b03
--- /dev/null
+++ b/kubernetes/a1policymanagement/templates/pv.yaml
@@ -0,0 +1,42 @@
+{{/*
+################################################################################
+# Copyright (c) 2021 Nordix Foundation. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+{{- if not .Values.persistence.storageClass -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}-data
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ include "common.release" . }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ storageClassName: "{{ include "common.fullname" . }}-data"
+ hostPath:
+ path: {{ .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}/app
+{{- end -}}
+{{- end -}}
diff --git a/kubernetes/a1policymanagement/templates/pvc.yaml b/kubernetes/a1policymanagement/templates/pvc.yaml
new file mode 100644
index 0000000000..4183edfdbb
--- /dev/null
+++ b/kubernetes/a1policymanagement/templates/pvc.yaml
@@ -0,0 +1,41 @@
+{{/*
+################################################################################
+# Copyright (c) 2021 Nordix Foundation. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ include "common.release" . }}"
+ heritage: "{{ .Release.Service }}"
+ {{- if .Values.persistence.annotations }}
+ annotations:
+{{ .Values.persistence.annotations | indent 4 }}
+ {{- end }}
+spec:
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+ storageClassName: {{ include "common.fullname" . }}-data
+{{- end -}}
diff --git a/kubernetes/a1policymanagement/values.yaml b/kubernetes/a1policymanagement/values.yaml
index 41a93ee014..08590d891c 100644
--- a/kubernetes/a1policymanagement/values.yaml
+++ b/kubernetes/a1policymanagement/values.yaml
@@ -122,10 +122,10 @@ resources:
small:
limits:
cpu: 2
- memory: 4Gi
+ memory: 300Mi
requests:
cpu: 1
- memory: 2Gi
+ memory: 150Mi
large:
limits:
cpu: 4
@@ -134,3 +134,28 @@ resources:
cpu: 2
memory: 4Gi
unlimited: {}
+
+## Persist data to a persistent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ ##
+ # storageClass: "-"
+ accessMode: ReadWriteOnce
+ size: 2Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: nonrtric/policymanagementservice
+
+
diff --git a/kubernetes/aaf/components/aaf-cass/values.yaml b/kubernetes/aaf/components/aaf-cass/values.yaml
index 525674434e..a1a1abe55a 100644
--- a/kubernetes/aaf/components/aaf-cass/values.yaml
+++ b/kubernetes/aaf/components/aaf-cass/values.yaml
@@ -93,4 +93,4 @@ persistence:
mountSubPath: "cass"
volumeReclaimPolicy: Retain
accessMode: ReadWriteOnce
- size: 20Gi
+ size: 5Gi
diff --git a/kubernetes/aai/components/aai-resources/resources/config/application-keycloak.properties b/kubernetes/aai/components/aai-resources/resources/config/application-keycloak.properties
index 4f480cb5d7..774e8bd5ca 100644
--- a/kubernetes/aai/components/aai-resources/resources/config/application-keycloak.properties
+++ b/kubernetes/aai/components/aai-resources/resources/config/application-keycloak.properties
@@ -3,10 +3,10 @@ spring.autoconfigure.exclude=\
org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,\
org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
-multi.tenancy.enabled=true
+multi.tenancy.enabled={{ .Values.config.keycloak.multiTenancy.enabled }}
keycloak.auth-server-url=http://{{ .Values.config.keycloak.host }}:{{ .Values.config.keycloak.port }}/auth
-keycloak.realm=aai-resources
-keycloak.resource=aai-resources-app
+keycloak.realm={{ .Values.config.keycloak.realm }}
+keycloak.resource={{ .Values.config.keycloak.resource }}
keycloak.public-client=true
keycloak.principal-attribute=preferred_username
diff --git a/kubernetes/aai/components/aai-resources/values.yaml b/kubernetes/aai/components/aai-resources/values.yaml
index b84139161e..f30b067b2e 100644
--- a/kubernetes/aai/components/aai-resources/values.yaml
+++ b/kubernetes/aai/components/aai-resources/values.yaml
@@ -49,7 +49,7 @@ global: # global defaults
# Active spring profiles for the resources microservice
profiles:
- active: production,dmaap,aaf-auth
+ active: production,dmaap,aaf-auth #,keycloak
# Notification event specific properties
notification:
@@ -164,9 +164,19 @@ replicaCount: 1
# Configuration for the resources deployment
config:
+ # configure keycloak according to your environment.
+ # don't forget to add keycloak in active profiles above (global.config.profiles)
keycloak:
- host: localhost
+ host: keycloak.your.domain
port: 8180
+ # Specifies a set of users, credentials, roles, and groups
+ realm: aai-resources
+ # Used by any client application for enabling fine-grained authorization for their protected resources
+ resource: aai-resources-app
+ # If set to true, additional criteria will be added that match the data-owner property with the given role
+ # to the user in keycloak
+ multiTenancy:
+ enabled: true
# Specifies crud related operation timeouts and overrides
crud:
diff --git a/kubernetes/aai/components/aai-traversal/resources/config/application-keycloak.properties b/kubernetes/aai/components/aai-traversal/resources/config/application-keycloak.properties
new file mode 100644
index 0000000000..dd1956b63f
--- /dev/null
+++ b/kubernetes/aai/components/aai-traversal/resources/config/application-keycloak.properties
@@ -0,0 +1,13 @@
+spring.autoconfigure.exclude=\
+ org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,\
+ org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+multi.tenancy.enabled={{ .Values.config.keycloak.multiTenancy.enabled }}
+keycloak.auth-server-url=http://{{ .Values.config.keycloak.host }}:{{ .Values.config.keycloak.port }}/auth
+keycloak.realm={{ .Values.config.keycloak.realm }}
+keycloak.resource={{ .Values.config.keycloak.resource }}
+keycloak.public-client=false
+keycloak.principal-attribute=preferred_username
+
+keycloak.ssl-required=external
+keycloak.bearer-only=true
diff --git a/kubernetes/aai/components/aai-traversal/templates/configmap.yaml b/kubernetes/aai/components/aai-traversal/templates/configmap.yaml
index c0bcb3b491..8f1bd2ddc8 100644
--- a/kubernetes/aai/components/aai-traversal/templates/configmap.yaml
+++ b/kubernetes/aai/components/aai-traversal/templates/configmap.yaml
@@ -32,6 +32,7 @@ data:
{{ tpl (.Files.Glob "resources/config/janusgraph-cached.properties").AsConfig . | indent 2 }}
{{ tpl (.Files.Glob "resources/config/aaiconfig.properties").AsConfig . | indent 2 }}
{{ tpl (.Files.Glob "resources/config/application.properties").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/application-keycloak.properties").AsConfig . | indent 2 }}
{{ tpl (.Files.Glob "resources/config/realm.properties").AsConfig . | indent 2 }}
---
apiVersion: v1
diff --git a/kubernetes/aai/components/aai-traversal/templates/deployment.yaml b/kubernetes/aai/components/aai-traversal/templates/deployment.yaml
index 7e54f1d432..dc1c010261 100644
--- a/kubernetes/aai/components/aai-traversal/templates/deployment.yaml
+++ b/kubernetes/aai/components/aai-traversal/templates/deployment.yaml
@@ -188,6 +188,9 @@ spec:
- mountPath: /opt/app/aai-traversal/resources/application.properties
name: {{ include "common.fullname" . }}-config
subPath: application.properties
+ - mountPath: /opt/app/aai-traversal/resources/application-keycloak.properties
+ name: {{ include "common.fullname" . }}-config
+ subPath: application-keycloak.properties
ports:
- containerPort: {{ .Values.service.internalPort }}
- containerPort: {{ .Values.service.internalPort2 }}
diff --git a/kubernetes/aai/components/aai-traversal/values.yaml b/kubernetes/aai/components/aai-traversal/values.yaml
index 38011a0c98..ad4279a543 100644
--- a/kubernetes/aai/components/aai-traversal/values.yaml
+++ b/kubernetes/aai/components/aai-traversal/values.yaml
@@ -59,7 +59,7 @@ global: # global defaults
# Active spring profiles for the resources microservice
profiles:
- active: production,dmaap,aaf-auth
+ active: production,dmaap,aaf-auth #,keycloak
# Notification event specific properties
notification:
@@ -168,6 +168,20 @@ aai_enpoints:
# application configuration
config:
+ # configure keycloak according to your environment.
+ # don't forget to add keycloak in active profiles above (global.config.profiles)
+ keycloak:
+ host: keycloak.your.domain
+ port: 8180
+ # Specifies a set of users, credentials, roles, and groups
+ realm: aai-traversal
+ # Used by any client application for enabling fine-grained authorization for their protected resources
+ resource: aai-traversal-app
+ # If set to true, additional criteria will be added into traversal query to returns all the vertices that match
+ # the data-owner property with the given role to the user in keycloak
+ multiTenancy:
+ enabled: true
+
# Specifies timeout information such as application specific and limits
timeout:
# If set to true application will timeout for queries taking longer than limit
diff --git a/kubernetes/appc/components/appc-cdt/values.yaml b/kubernetes/appc/components/appc-cdt/values.yaml
index 3b1ff47116..5765d3482d 100644
--- a/kubernetes/appc/components/appc-cdt/values.yaml
+++ b/kubernetes/appc/components/appc-cdt/values.yaml
@@ -38,27 +38,17 @@ certInitializer:
cadi_longitude: "-72.0"
credsPath: /opt/app/osaaf/local
aaf_add_config: |
- echo "*** retrieving password for keystore"
- export $(/opt/app/aaf_config/bin/agent.sh local showpass \
- {{.Values.fqi}} {{ .Values.fqdn }} | grep '^c' | xargs -0)
- if [ -z "$cadi_keystore_password_p12" ]
- then
- echo " /!\ certificates retrieval failed"
- exit 1
- else
- cd {{ .Values.credsPath }};
- mkdir -p certs;
- echo "*** transform AAF certs into pem files"
- mkdir -p {{ .Values.credsPath }}/certs
- openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
- -nokeys -out {{ .Values.credsPath }}/certs/cert.pem \
- -passin pass:$cadi_keystore_password_p12 \
- -passout pass:$cadi_keystore_password_p12
- echo "*** copy key file"
- cp {{ .Values.fqi_namespace }}.key certs/key.pem;
- echo "*** change ownership of certificates to targeted user"
- chown -R 1000 {{ .Values.credsPath }}
- fi
+ echo "*** transform AAF certs into pem files"
+ mkdir -p {{ .Values.credsPath }}/certs
+ openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
+ -nokeys -out {{ .Values.credsPath }}/certs/cert.pem \
+ -passin pass:$cadi_keystore_password_p12 \
+ -passout pass:$cadi_keystore_password_p12
+ echo "*** copy key file"
+ cp {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.key \
+ {{ .Values.credsPath }}/certs/key.pem
+ echo "*** change ownership of certificates to targeted user"
+ chown -R 1000 {{ .Values.credsPath }}
#################################################################
# Application configuration defaults.
diff --git a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/health_check.sh b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/health_check.sh
index 6e35ca894c..f2675b0404 100755
--- a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/health_check.sh
+++ b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/health_check.sh
@@ -18,7 +18,7 @@
waiting_bundles=$(/opt/opendaylight/current/bin/client bundle:list | grep Waiting | wc -l)
run_level=$(/opt/opendaylight/current/bin/client system:start-level)
- if [ "$run_level" == "Level 100" ] && [ "$waiting_bundles" -lt "1" ]
+ if [ "$run_level" = "Level 100" ] && [ "$waiting_bundles" -lt "1" ]
then
echo APPC is healthy.
else
diff --git a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh
index c78daee558..85f5aac246 100755
--- a/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh
+++ b/kubernetes/appc/resources/config/appc/opt/onap/appc/bin/startODL.sh
@@ -65,7 +65,7 @@ DBINIT_DIR=${DBINIT_DIR:-/opt/opendaylight/current/daexim}
# Wait for database to init properly
#
echo "Waiting for mariadbgalera"
-until mysql -h {{.Values.config.mariadbGaleraSVCName}}.{{.Release.Namespace}} -u root -p${MYSQL_PASSWD} mysql &> /dev/null
+until mysql -h {{.Values.config.mariadbGaleraSVCName}}.{{.Release.Namespace}} -u root -p${MYSQL_PASSWD} mysql >/dev/null 2>&1
do
printf "."
sleep 1
@@ -83,7 +83,7 @@ then
show databases like 'sdnctl';
END
)
- if [ "x${sdnc_db_exists}" == "x" ]
+ if [ "x${sdnc_db_exists}" = "x" ]
then
echo "Installing SDNC database"
${SDNC_HOME}/bin/installSdncDb.sh
@@ -92,7 +92,7 @@ END
show databases like 'appcctl';
END
)
- if [ "x${appc_db_exists}" == "x" ]
+ if [ "x${appc_db_exists}" = "x" ]
then
echo "Installing APPC database"
${APPC_HOME}/bin/installAppcDb.sh
diff --git a/kubernetes/appc/values.yaml b/kubernetes/appc/values.yaml
index cc56bb4859..83d00a7545 100644
--- a/kubernetes/appc/values.yaml
+++ b/kubernetes/appc/values.yaml
@@ -129,6 +129,7 @@ mariadb-galera:
disableNfsProvisioner: true
serviceAccount:
nameOverride: *appc-db
+ replicaCount: 1
dgbuilder:
nameOverride: appc-dgbuilder
diff --git a/kubernetes/cds/components/cds-blueprints-processor/templates/deployment.yaml b/kubernetes/cds/components/cds-blueprints-processor/templates/deployment.yaml
index 9645b20cd2..c2e034204c 100755
--- a/kubernetes/cds/components/cds-blueprints-processor/templates/deployment.yaml
+++ b/kubernetes/cds/components/cds-blueprints-processor/templates/deployment.yaml
@@ -123,6 +123,16 @@ spec:
- containerPort: {{ .Values.service.http.internalPort }}
- containerPort: {{ .Values.service.grpc.internalPort }}
- containerPort: {{ .Values.service.cluster.internalPort }}
+ startupProbe:
+ httpGet:
+ path: /api/v1/execution-service/health-check
+ port: {{ .Values.service.http.internalPort }}
+ httpHeaders:
+ - name: Authorization
+ value: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw==
+ initialDelaySeconds: {{ .Values.startup.initialDelaySeconds }}
+ failureThreshold: {{ .Values.startup.failureThreshold }}
+ periodSeconds: {{ .Values.startup.periodSeconds }}
# disable liveness probe when breakpoints set in debugger
# so K8s doesn't restart unresponsive container
{{ if .Values.liveness.enabled }}
diff --git a/kubernetes/cds/components/cds-blueprints-processor/values.yaml b/kubernetes/cds/components/cds-blueprints-processor/values.yaml
index 266032844d..fe60b8023c 100755
--- a/kubernetes/cds/components/cds-blueprints-processor/values.yaml
+++ b/kubernetes/cds/components/cds-blueprints-processor/values.yaml
@@ -51,7 +51,7 @@ secrets:
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-blueprintsprocessor:1.1.2
+image: onap/ccsdk-blueprintsprocessor:1.1.4
pullPolicy: Always
# flag to enable debugging - application support required
@@ -77,7 +77,7 @@ config:
# dbRootPassExternalSecret
# default number of instances
-replicaCount: 3
+replicaCount: 1
nodeSelector: {}
@@ -89,8 +89,13 @@ dmaapEnabled: true
# probe configuration parameters
+startup:
+ initialDelaySeconds: 10
+ failureThreshold: 30
+ periodSeconds: 10
+
liveness:
- initialDelaySeconds: 120
+ initialDelaySeconds: 0
periodSeconds: 20
timeoutSeconds: 20
# necessary to disable liveness probe when setting breakpoints
@@ -129,7 +134,7 @@ persistence:
cluster:
# Cannot have cluster enabled if the replicaCount is not at least 3
- enabled: true
+ enabled: false
clusterName: cds-cluster
diff --git a/kubernetes/cds/components/cds-command-executor/values.yaml b/kubernetes/cds/components/cds-command-executor/values.yaml
index bed223ebcd..f867565915 100755
--- a/kubernetes/cds/components/cds-command-executor/values.yaml
+++ b/kubernetes/cds/components/cds-command-executor/values.yaml
@@ -32,7 +32,7 @@ global:
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-commandexecutor:1.1.2
+image: onap/ccsdk-commandexecutor:1.1.4
pullPolicy: Always
# application configuration
diff --git a/kubernetes/cds/components/cds-py-executor/values.yaml b/kubernetes/cds/components/cds-py-executor/values.yaml
index dfc7e59dda..af042c1605 100755
--- a/kubernetes/cds/components/cds-py-executor/values.yaml
+++ b/kubernetes/cds/components/cds-py-executor/values.yaml
@@ -30,7 +30,7 @@ global:
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-py-executor:1.1.2
+image: onap/ccsdk-py-executor:1.1.4
pullPolicy: Always
# default number of instances
diff --git a/kubernetes/cds/components/cds-sdc-listener/values.yaml b/kubernetes/cds/components/cds-sdc-listener/values.yaml
index f6f45b7ad8..e46539fb35 100644
--- a/kubernetes/cds/components/cds-sdc-listener/values.yaml
+++ b/kubernetes/cds/components/cds-sdc-listener/values.yaml
@@ -29,7 +29,7 @@ global:
# Application configuration defaults.
#################################################################
# application image
-image: onap/ccsdk-sdclistener:1.1.2
+image: onap/ccsdk-sdclistener:1.1.4
name: sdc-listener
pullPolicy: Always
diff --git a/kubernetes/cds/components/cds-ui/values.yaml b/kubernetes/cds/components/cds-ui/values.yaml
index 8120679803..697602f209 100644
--- a/kubernetes/cds/components/cds-ui/values.yaml
+++ b/kubernetes/cds/components/cds-ui/values.yaml
@@ -44,7 +44,7 @@ certInitializer:
{{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
# application image
-image: onap/ccsdk-cds-ui-server:1.1.2
+image: onap/ccsdk-cds-ui-server:1.1.4
pullPolicy: Always
# application configuration
diff --git a/kubernetes/cds/values.yaml b/kubernetes/cds/values.yaml
index 5510b3a3a0..edac066f6f 100644
--- a/kubernetes/cds/values.yaml
+++ b/kubernetes/cds/values.yaml
@@ -84,6 +84,126 @@ mariadb-galera:
serviceAccount:
nameOverride: *dbServer
+ mariadbConfiguration: |-
+ [client]
+ port=3306
+ socket=/opt/bitnami/mariadb/tmp/mysql.sock
+ plugin_dir=/opt/bitnami/mariadb/plugin
+
+ [mysqld]
+ lower_case_table_names = 1
+ default_storage_engine=InnoDB
+ basedir=/opt/bitnami/mariadb
+ datadir=/bitnami/mariadb/data
+ plugin_dir=/opt/bitnami/mariadb/plugin
+ tmpdir=/opt/bitnami/mariadb/tmp
+ socket=/opt/bitnami/mariadb/tmp/mysql.sock
+ pid_file=/opt/bitnami/mariadb/tmp/mysqld.pid
+ bind_address=0.0.0.0
+
+ ## Character set
+ collation_server=utf8_unicode_ci
+ init_connect='SET NAMES utf8'
+ character_set_server=utf8
+
+ ## MyISAM
+ key_buffer_size=32M
+ myisam_recover_options=FORCE,BACKUP
+
+ ## Safety
+ skip_host_cache
+ skip_name_resolve
+ max_allowed_packet=16M
+ max_connect_errors=1000000
+ sql_mode=STRICT_TRANS_TABLES,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ENGINE_SUBSTITUTION,NO_ZERO_DATE,NO_ZERO_IN_DATE,ONLY_FULL_GROUP_BY
+ sysdate_is_now=1
+
+ ## Binary Logging
+ log_bin=mysql-bin
+ expire_logs_days=14
+ # Disabling for performance per http://severalnines.com/blog/9-tips-going-production-galera-cluster-mysql
+ sync_binlog=0
+ # Required for Galera
+ binlog_format=row
+
+ ## Caches and Limits
+ tmp_table_size=32M
+ max_heap_table_size=32M
+ # Re-enabling as now works with Maria 10.1.2
+ query_cache_type=1
+ query_cache_limit=4M
+ query_cache_size=256M
+ max_connections=500
+ thread_cache_size=50
+ open_files_limit=65535
+ table_definition_cache=4096
+ table_open_cache=4096
+
+ ## InnoDB
+ innodb=FORCE
+ innodb_strict_mode=1
+ # Mandatory per https://github.com/codership/documentation/issues/25
+ innodb_autoinc_lock_mode=2
+ # Per https://www.percona.com/blog/2006/08/04/innodb-double-write/
+ innodb_doublewrite=1
+ innodb_flush_method=O_DIRECT
+ innodb_log_files_in_group=2
+ innodb_log_file_size=128M
+ innodb_flush_log_at_trx_commit=1
+ innodb_file_per_table=1
+ # 80% Memory is default reco.
+ # Need to re-evaluate when DB size grows
+ innodb_buffer_pool_size=2G
+ innodb_file_format=Barracuda
+
+ ## Logging
+ log_error=/opt/bitnami/mariadb/logs/mysqld.log
+ slow_query_log_file=/opt/bitnami/mariadb/logs/mysqld.log
+ log_queries_not_using_indexes=1
+ slow_query_log=1
+
+ ## SSL
+ ## Use extraVolumes and extraVolumeMounts to mount /certs filesystem
+ # ssl_ca=/certs/ca.pem
+ # ssl_cert=/certs/server-cert.pem
+ # ssl_key=/certs/server-key.pem
+
+ [galera]
+ wsrep_on=ON
+ wsrep_provider=/opt/bitnami/mariadb/lib/libgalera_smm.so
+ wsrep_sst_method=mariabackup
+ wsrep_slave_threads=4
+ wsrep_cluster_address=gcomm://
+ wsrep_cluster_name=galera
+ wsrep_sst_auth="root:"
+ # Enabled for performance per https://mariadb.com/kb/en/innodb-system-variables/#innodb_flush_log_at_trx_commit
+ innodb_flush_log_at_trx_commit=2
+ # MYISAM REPLICATION SUPPORT #
+ wsrep_replicate_myisam=ON
+
+ [mariadb]
+ plugin_load_add=auth_pam
+
+ ## Data-at-Rest Encryption
+ ## Use extraVolumes and extraVolumeMounts to mount /encryption filesystem
+ # plugin_load_add=file_key_management
+ # file_key_management_filename=/encryption/keyfile.enc
+ # file_key_management_filekey=FILE:/encryption/keyfile.key
+ # file_key_management_encryption_algorithm=AES_CTR
+ # encrypt_binlog=ON
+ # encrypt_tmp_files=ON
+
+ ## InnoDB/XtraDB Encryption
+ # innodb_encrypt_tables=ON
+ # innodb_encrypt_temporary_tables=ON
+ # innodb_encrypt_log=ON
+ # innodb_encryption_threads=4
+ # innodb_encryption_rotate_key_age=1
+
+ ## Aria Encryption
+ # aria_encrypt_tables=ON
+ # encrypt_tmp_disk_tables=ON
+
cds-blueprints-processor:
enabled: true
config:
diff --git a/kubernetes/common/cassandra/resources/restore.sh b/kubernetes/common/cassandra/resources/restore.sh
index b56c0fac70..a8105345f7 100644
--- a/kubernetes/common/cassandra/resources/restore.sh
+++ b/kubernetes/common/cassandra/resources/restore.sh
@@ -75,7 +75,7 @@ esac
done
# Validate inputs
-if [ "$base_db_dir" == "" ] || [ "$ss_dir" == "" ] || [ "$keyspace_name" == "" ]
+if [ "$base_db_dir" = "" ] || [ "$ss_dir" = "" ] || [ "$keyspace_name" = "" ]
then
echo ""
echo ">>>>>>>>>>Not all inputs provided, please check usage >>>>>>>>>>"
diff --git a/kubernetes/common/cassandra/templates/statefulset.yaml b/kubernetes/common/cassandra/templates/statefulset.yaml
index 953c89d24d..3553cd4069 100644
--- a/kubernetes/common/cassandra/templates/statefulset.yaml
+++ b/kubernetes/common/cassandra/templates/statefulset.yaml
@@ -71,6 +71,17 @@ spec:
timeoutSeconds: {{ .Values.readiness.timeoutSeconds }}
successThreshold: {{ .Values.readiness.successThreshold }}
failureThreshold: {{ .Values.readiness.failureThreshold }}
+ startupProbe:
+ exec:
+ command:
+ - /bin/bash
+ - -c
+ - nodetool status | grep $POD_IP | awk '$1!="UN" { exit 1; }'
+ initialDelaySeconds: {{ .Values.startup.initialDelaySeconds }}
+ periodSeconds: {{ .Values.startup.periodSeconds }}
+ timeoutSeconds: {{ .Values.startup.timeoutSeconds }}
+ successThreshold: {{ .Values.startup.successThreshold }}
+ failureThreshold: {{ .Values.startup.failureThreshold }}
env:
{{- $seed_size := default 1 .Values.replicaCount | int -}}
{{- $global := . }}
diff --git a/kubernetes/common/cassandra/values.yaml b/kubernetes/common/cassandra/values.yaml
index c3d22cedc0..9f19bf5c14 100644
--- a/kubernetes/common/cassandra/values.yaml
+++ b/kubernetes/common/cassandra/values.yaml
@@ -54,8 +54,8 @@ affinity: {}
# probe configuration parameters
liveness:
- initialDelaySeconds: 60
- periodSeconds: 20
+ initialDelaySeconds: 1
+ periodSeconds: 10
timeoutSeconds: 10
successThreshold: 1
failureThreshold: 3
@@ -64,12 +64,19 @@ liveness:
enabled: true
readiness:
- initialDelaySeconds: 120
- periodSeconds: 20
+ initialDelaySeconds: 1
+ periodSeconds: 10
timeoutSeconds: 10
successThreshold: 1
failureThreshold: 3
+startup:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ timeoutSeconds: 10
+ successThreshold: 1
+ failureThreshold: 90
+
service:
name: cassandra
headless:
@@ -119,7 +126,7 @@ persistence:
## storageClass: "-"
## Not set as it depends of the backup enabledment or not.
accessMode: ReadWriteOnce
- size: 2Gi
+ size: 10Gi
mountPath: /dockerdata-nfs
mountSubPath: cassandra
storageType: local
diff --git a/kubernetes/common/cert-wrapper/resources/import-custom-certs.sh b/kubernetes/common/cert-wrapper/resources/import-custom-certs.sh
index b5a1d57649..cb4153e778 100755
--- a/kubernetes/common/cert-wrapper/resources/import-custom-certs.sh
+++ b/kubernetes/common/cert-wrapper/resources/import-custom-certs.sh
@@ -17,6 +17,7 @@
*/}}
CERTS_DIR=${CERTS_DIR:-/certs}
+MORE_CERTS_DIR=${MORE_CERTS_DIR:-/more_certs}
WORK_DIR=${WORK_DIR:-/updatedTruststore}
ONAP_TRUSTSTORE=${ONAP_TRUSTSTORE:-truststoreONAPall.jks}
JRE_TRUSTSTORE=${JRE_TRUSTSTORE:-$JAVA_HOME/lib/security/cacerts}
@@ -28,18 +29,18 @@ mkdir -p $WORK_DIR
for f in $CERTS_DIR/*; do
export canonical_name_nob64=$(echo $f | sed 's/.*\/\([^\/]*\)/\1/')
export canonical_name_b64=$(echo $f | sed 's/.*\/\([^\/]*\)\(\.b64\)/\1/')
- if [ "$AAF_ENABLED" == "false" ] && [ "$canonical_name_b64" == "$ONAP_TRUSTSTORE" ]; then
+ if [ "$AAF_ENABLED" = "false" ] && [ "$canonical_name_b64" = "$ONAP_TRUSTSTORE" ]; then
# Dont use onap truststore when aaf is disabled
continue
fi
- if [ "$AAF_ENABLED" == "false" ] && [ "$canonical_name_nob64" == "$ONAP_TRUSTSTORE" ]; then
+ if [ "$AAF_ENABLED" = "false" ] && [ "$canonical_name_nob64" = "$ONAP_TRUSTSTORE" ]; then
# Dont use onap truststore when aaf is disabled
continue
fi
- if [ ${f: -3} == ".sh" ]; then
+ if [ ${f: -3} = ".sh" ]; then
continue
fi
- if [ ${f: -4} == ".b64" ]
+ if [ ${f: -4} = ".b64" ]
then
base64 -d $f > $WORK_DIR/`basename $f .b64`
else
@@ -47,8 +48,15 @@ for f in $CERTS_DIR/*; do
fi
done
+for f in $MORE_CERTS_DIR/*; do
+ if [ ${f: -4} == ".pem" ]
+ then
+ cp $f $WORK_DIR/.
+ fi
+done
+
# Prepare truststore output file
-if [ "$AAF_ENABLED" == "true" ]
+if [ "$AAF_ENABLED" = "true" ]
then
echo "AAF is enabled, use 'AAF' truststore"
export TRUSTSTORE_OUTPUT_FILENAME=${ONAP_TRUSTSTORE}
@@ -59,7 +67,7 @@ fi
# Import Custom Certificates
for f in $WORK_DIR/*; do
- if [ ${f: -4} == ".pem" ]; then
+ if [ ${f: -4} = ".pem" ]; then
echo "importing certificate: $f"
keytool -import -file $f -alias `basename $f` -keystore $WORK_DIR/$TRUSTSTORE_OUTPUT_FILENAME -storepass $TRUSTSTORE_PASSWORD -noprompt
if [ $? != 0 ]; then
diff --git a/kubernetes/common/certInitializer/resources/ingress/onboard.sh b/kubernetes/common/certInitializer/resources/ingress/onboard.sh
new file mode 100644
index 0000000000..9cc5ec580e
--- /dev/null
+++ b/kubernetes/common/certInitializer/resources/ingress/onboard.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+{{/*
+# Copyright © 2020 Orange
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/ -}}
+
+echo "*** retrieving certificates and keys"
+export CRT=$(cat {{ .Values.credsPath }}/certs/tls.crt | base64 -w 0)
+export KEY=$(cat {{ .Values.credsPath }}/certs/tls.key | base64 -w 0)
+export CACERT=$(cat {{ .Values.credsPath }}/certs/cacert.pem | base64 -w 0)
+echo "*** creating tls secret"
+cat <<EOF | kubectl apply -f -
+apiVersion: v1
+kind: Secret
+metadata:
+ name: {{ tpl .Values.ingressTlsSecret . }}
+ namespace: {{ include "common.namespace" . }}
+data:
+ ca.crt: "${CACERT}"
+ tls.crt: "${CRT}"
+ tls.key: '${KEY}'
+type: kubernetes.io/tls
+EOF
diff --git a/kubernetes/common/certInitializer/resources/retrieval_check.sh b/kubernetes/common/certInitializer/resources/retrieval/retrieval_check.sh
index 25e47693de..76f384502f 100644
--- a/kubernetes/common/certInitializer/resources/retrieval_check.sh
+++ b/kubernetes/common/certInitializer/resources/retrieval/retrieval_check.sh
@@ -14,7 +14,8 @@
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
-*/}}
+*/ -}}
+
echo "*** retrieving passwords for certificates"
export $(/opt/app/aaf_config/bin/agent.sh local showpass \
{{.Values.fqi}} {{ .Values.fqdn }} | grep '^c' | xargs -0)
diff --git a/kubernetes/common/certInitializer/resources/retrieval/tls_certs_configure.sh b/kubernetes/common/certInitializer/resources/retrieval/tls_certs_configure.sh
new file mode 100644
index 0000000000..f201eadd0a
--- /dev/null
+++ b/kubernetes/common/certInitializer/resources/retrieval/tls_certs_configure.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+{{/*
+# Copyright © 2021 Orange
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/ -}}
+
+echo "--- Cert transformation for use with Ingress"
+echo "*** transform AAF certs into pem files"
+mkdir -p {{ .Values.credsPath }}/certs
+keytool -exportcert -rfc -file {{ .Values.credsPath }}/certs/cacert.pem \
+ -keystore {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.trust.jks \
+ -alias ca_local_0 \
+ -storepass $cadi_truststore_password
+openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
+ -out {{ .Values.credsPath }}/certs/tls.crt -nokeys \
+ -passin pass:$cadi_keystore_password_p12 \
+ -passout pass:$cadi_keystore_password_p12
+cp {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.key \
+ {{ .Values.credsPath }}/certs/tls.key
+echo "--- Done"
diff --git a/kubernetes/common/certInitializer/templates/_certInitializer.yaml b/kubernetes/common/certInitializer/templates/_certInitializer.yaml
index 414192e2bc..f3ba8a24e0 100644
--- a/kubernetes/common/certInitializer/templates/_certInitializer.yaml
+++ b/kubernetes/common/certInitializer/templates/_certInitializer.yaml
@@ -1,5 +1,6 @@
{{/*
# Copyright © 2020 Bell Canada, Samsung Electronics
+# Copyright © 2021 Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -58,6 +59,11 @@
- name: {{ include "common.certInitializer._aafAddConfigVolumeName" $dot }}
mountPath: /opt/app/aaf_config/bin/retrieval_check.sh
subPath: retrieval_check.sh
+{{- if hasKey $initRoot "ingressTlsSecret" }}
+ - name: {{ include "common.certInitializer._aafAddConfigVolumeName" $dot }}
+ mountPath: /opt/app/aaf_config/bin/tls_certs_configure.sh
+ subPath: tls_certs_configure.sh
+{{- end }}
{{- if $initRoot.aaf_add_config }}
- name: {{ include "common.certInitializer._aafAddConfigVolumeName" $dot }}
mountPath: /opt/app/aaf_config/bin/aaf-add-config.sh
@@ -69,6 +75,9 @@
- |
/opt/app/aaf_config/bin/agent.sh
. /opt/app/aaf_config/bin/retrieval_check.sh
+{{- if hasKey $initRoot "ingressTlsSecret" }}
+ /opt/app/aaf_config/bin/tls_certs_configure.sh
+{{- end -}}
{{- if $initRoot.aaf_add_config }}
/opt/app/aaf_config/bin/aaf-add-config.sh
{{- end }}
@@ -137,6 +146,8 @@
volumeMounts:
- mountPath: /certs
name: aaf-agent-certs
+ - mountPath: /more_certs
+ name: provided-custom-certs
- mountPath: /root/import-custom-certs.sh
name: aaf-agent-certs
subPath: import-custom-certs.sh
@@ -177,6 +188,21 @@
configMap:
name: {{ tpl $subchartDot.Values.certsCMName $subchartDot }}
defaultMode: 0700
+{{- if $dot.Values.global.importCustomCertsEnabled }}
+- name: provided-custom-certs
+{{- if $dot.Values.global.customCertsSecret }}
+ secret:
+ secretName: {{ $dot.Values.global.customCertsSecret }}
+{{- else }}
+{{- if $dot.Values.global.customCertsConfigMap }}
+ configMap:
+ name: {{ $dot.Values.global.customCertsConfigMap }}
+{{- else }}
+ emptyDir:
+ medium: Memory
+{{- end }}
+{{- end }}
+{{- end }}
- name: {{ include "common.certInitializer._aafAddConfigVolumeName" $dot }}
configMap:
name: {{ include "common.fullname" $subchartDot }}-add-config
diff --git a/kubernetes/common/certInitializer/templates/configmap.yaml b/kubernetes/common/certInitializer/templates/configmap.yaml
index 1e9254abef..abd1575774 100644
--- a/kubernetes/common/certInitializer/templates/configmap.yaml
+++ b/kubernetes/common/certInitializer/templates/configmap.yaml
@@ -1,5 +1,6 @@
{{/*
# Copyright © 2020 Samsung Electronics
+# Copyright © 2021 Orange
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -19,8 +20,20 @@ kind: ConfigMap
{{- $suffix := "add-config" }}
metadata: {{- include "common.resourceMetadata" (dict "suffix" $suffix "dot" . )| nindent 2 }}
data:
-{{ tpl (.Files.Glob "resources/*").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/retrieval/retrieval_check.sh").AsConfig . | indent 2 }}
+{{- if hasKey .Values "ingressTlsSecret" }}
+{{ tpl (.Files.Glob "resources/retrieval/tls_certs_configure.sh").AsConfig . | indent 2 }}
+{{- end }}
{{ if .Values.aaf_add_config }}
aaf-add-config.sh: |
{{ tpl .Values.aaf_add_config . | indent 4 | trim }}
{{- end }}
+{{- if hasKey .Values "ingressTlsSecret" }}
+---
+apiVersion: v1
+kind: ConfigMap
+{{- $suffix := "ingress" }}
+metadata: {{- include "common.resourceMetadata" (dict "suffix" $suffix "dot" . )| nindent 2 }}
+data:
+{{ tpl (.Files.Glob "resources/ingress/onboard.sh").AsConfig . | indent 2 }}
+{{- end }}
diff --git a/kubernetes/common/certInitializer/templates/job.yaml b/kubernetes/common/certInitializer/templates/job.yaml
new file mode 100644
index 0000000000..331a58c310
--- /dev/null
+++ b/kubernetes/common/certInitializer/templates/job.yaml
@@ -0,0 +1,44 @@
+{{/*
+# Copyright © 2021 Orange
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if hasKey .Values "ingressTlsSecret" }}
+apiVersion: batch/v1
+kind: Job
+{{- $suffix := "set-tls-secret" }}
+metadata: {{- include "common.resourceMetadata" (dict "suffix" $suffix "dot" . )| nindent 2 }}
+spec:
+ template:
+ metadata: {{- include "common.templateMetadata" . | nindent 6 }}
+ spec:
+ initContainers: {{ include "common.certInitializer.initContainer" (dict "dot" . "initRoot" .Values) | nindent 6 }}
+ containers:
+ - name: create tls secret
+ command:
+ - /ingress/onboard.sh
+ image: {{ include "repositoryGenerator.image.kubectl" . }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts: {{ include "common.certInitializer.volumeMount" (dict "dot" . "initRoot" .Values) | nindent 8 }}
+ - name: ingress-scripts
+ mountPath: /ingress
+ volumes: {{ include "common.certInitializer.volumes" (dict "dot" . "initRoot" .Values) | nindent 6 }}
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: ingress-scripts
+ configMap:
+ name: {{ include "common.fullname" . }}-ingress
+ defaultMode: 0777
+{{- end}}
diff --git a/kubernetes/common/certInitializer/values.yaml b/kubernetes/common/certInitializer/values.yaml
index 52b2765329..747c94f4d1 100644
--- a/kubernetes/common/certInitializer/values.yaml
+++ b/kubernetes/common/certInitializer/values.yaml
@@ -15,6 +15,15 @@
global:
aafAgentImage: onap/aaf/aaf_agent:2.1.20
aafEnabled: true
+ # Give the name of a config map where certInitializer will onboard all certs
+ # given (certs must be in pem format)
+ customCertsConfigMap:
+ # Give the name of a secret where certInitializer will onboard all certs given
+ # (certs must be in pem format)
+ # this one superseedes previous one (so if both are given, only certs from
+ # secret will be onboarded).
+ customCertsSecret:
+
pullPolicy: Always
@@ -37,7 +46,6 @@ readinessCheck:
- aaf-cm
- aaf-service
-aafDeployFqi: "changeme"
fqdn: ""
app_ns: "org.osaaf.aaf"
fqi: ""
@@ -55,6 +63,7 @@ truststoreMountpath: ""
truststoreOutputFileName: truststore.jks
truststorePassword: changeit
envVarToCheck: cadi_keystore_password_p12
+# ingressTlsSecret:
# This introduces implicit dependency on cert-wrapper
# if you are using cert initializer cert-wrapper has to be also deployed.
diff --git a/kubernetes/common/certManagerCertificate/requirements.yaml b/kubernetes/common/certManagerCertificate/requirements.yaml
index 210a02c65c..83becb0a33 100644
--- a/kubernetes/common/certManagerCertificate/requirements.yaml
+++ b/kubernetes/common/certManagerCertificate/requirements.yaml
@@ -16,3 +16,6 @@ dependencies:
- name: common
version: ~8.x-0
repository: 'file://../common'
+ - name: cmpv2Config
+ version: ~8.x-0
+ repository: 'file://../cmpv2Config'
diff --git a/kubernetes/common/certManagerCertificate/templates/_certificate.tpl b/kubernetes/common/certManagerCertificate/templates/_certificate.tpl
index f820c30ca9..6fc667429e 100644
--- a/kubernetes/common/certManagerCertificate/templates/_certificate.tpl
+++ b/kubernetes/common/certManagerCertificate/templates/_certificate.tpl
@@ -18,7 +18,7 @@
#
# To request a certificate following steps are to be done:
# - create an object 'certificates' in the values.yaml
-# - create a file templates/certificates.yaml and invoke the function "certManagerCertificate.certificate".
+# - create a file templates/certificate.yaml and invoke the function "certManagerCertificate.certificate".
#
# Here is an example of the certificate request for a component:
#
@@ -53,6 +53,7 @@
# passwordSecretRef:
# name: secret-name
# key: secret-key
+# create: true
#
# Fields 'name', 'secretName' and 'commonName' are mandatory and required to be defined.
# Other mandatory fields for the certificate definition do not have to be defined directly,
@@ -74,7 +75,7 @@
{{/*# General certifiacate attributes #*/}}
{{- $name := include "common.fullname" $dot -}}
{{- $certName := default (printf "%s-cert-%d" $name $i) $certificate.name -}}
-{{- $secretName := default (printf "%s-secret-%d" $name $i) $certificate.secretName -}}
+{{- $secretName := default (printf "%s-secret-%d" $name $i) (tpl (default "" $certificate.secretName) $ ) -}}
{{- $commonName := (required "'commonName' for Certificate is required." $certificate.commonName) -}}
{{- $renewBefore := default $subchartGlobal.certificate.default.renewBefore $certificate.renewBefore -}}
{{- $duration := default $subchartGlobal.certificate.default.duration $certificate.duration -}}
@@ -94,10 +95,11 @@
{{- if $certificate.issuer -}}
{{- $issuer = $certificate.issuer -}}
{{- end -}}
----
-{{- if $certificate.keystore }}
+{{/*# Secret #*/}}
+{{ if $certificate.keystore -}}
{{- $passwordSecretRef := $certificate.keystore.passwordSecretRef -}}
- {{- $password := include "common.createPassword" (dict "dot" $dot "uid" $certName) | quote }}
+ {{- $password := include "common.createPassword" (dict "dot" $dot "uid" $certName) | quote -}}
+ {{- if $passwordSecretRef.create }}
apiVersion: v1
kind: Secret
metadata:
@@ -106,7 +108,8 @@ metadata:
type: Opaque
stringData:
{{ $passwordSecretRef.key }}: {{ $password }}
-{{- end }}
+ {{- end }}
+{{ end -}}
---
apiVersion: cert-manager.io/v1
kind: Certificate
@@ -120,6 +123,15 @@ spec:
{{- if $duration }}
duration: {{ $duration }}
{{- end }}
+ {{- if $certificate.isCA }}
+ isCA: {{ $certificate.isCA }}
+ {{- end }}
+ {{- if $certificate.usages }}
+ usages:
+ {{- range $usage := $certificate.usages }}
+ - {{ $usage }}
+ {{- end }}
+ {{- end }}
subject:
organizations:
- {{ $subject.organization }}
@@ -156,7 +168,9 @@ spec:
{{- end }}
{{- end }}
issuerRef:
+ {{- if not (eq $issuer.kind "Issuer" ) }}
group: {{ $issuer.group }}
+ {{- end }}
kind: {{ $issuer.kind }}
name: {{ $issuer.name }}
{{- if $certificate.keystore }}
@@ -168,13 +182,15 @@ spec:
{{ $outputType }}:
create: true
passwordSecretRef:
- name: {{ $certificate.keystore.passwordSecretRef.name }}
+ name: {{ tpl (default "" $certificate.keystore.passwordSecretRef.name) $ }}
key: {{ $certificate.keystore.passwordSecretRef.key }}
{{- end }}
{{- end }}
{{ end }}
{{- end -}}
+{{/*Using templates below allows read and write access to volume mounted at $mountPath*/}}
+
{{- define "common.certManager.volumeMounts" -}}
{{- $dot := default . .dot -}}
{{- $initRoot := default $dot.Values.certManagerCertificate .initRoot -}}
@@ -235,3 +251,48 @@ spec:
{{- end -}}
{{ $certsLinkCommand }}
{{- end -}}
+
+{{/*Using templates below allows only read access to volume mounted at $mountPath*/}}
+
+{{- define "common.certManager.volumeMountsReadOnly" -}}
+{{- $dot := default . .dot -}}
+{{- $initRoot := default $dot.Values.certManagerCertificate .initRoot -}}
+{{- $subchartGlobal := mergeOverwrite (deepCopy $initRoot.global) $dot.Values.global -}}
+ {{- range $i, $certificate := $dot.Values.certificates -}}
+ {{- $mountPath := $certificate.mountPath -}}
+- mountPath: {{ $mountPath }}
+ name: certmanager-certs-volume-{{ $i }}
+ {{- end -}}
+{{- end -}}
+
+{{- define "common.certManager.volumesReadOnly" -}}
+{{- $dot := default . .dot -}}
+{{- $initRoot := default $dot.Values.certManagerCertificate .initRoot -}}
+{{- $subchartGlobal := mergeOverwrite (deepCopy $initRoot.global) $dot.Values.global -}}
+{{- $certificates := $dot.Values.certificates -}}
+ {{- range $i, $certificate := $certificates -}}
+ {{- $name := include "common.fullname" $dot -}}
+ {{- $certificatesSecretName := default (printf "%s-secret-%d" $name $i) $certificate.secretName -}}
+- name: certmanager-certs-volume-{{ $i }}
+ projected:
+ sources:
+ - secret:
+ name: {{ $certificatesSecretName }}
+ {{- if $certificate.keystore }}
+ items:
+ {{- range $outputType := $certificate.keystore.outputType }}
+ - key: keystore.{{ $outputType }}
+ path: keystore.{{ $outputType }}
+ - key: truststore.{{ $outputType }}
+ path: truststore.{{ $outputType }}
+ {{- end }}
+ - secret:
+ name: {{ $certificate.keystore.passwordSecretRef.name }}
+ items:
+ - key: {{ $certificate.keystore.passwordSecretRef.key }}
+ path: keystore.pass
+ - key: {{ $certificate.keystore.passwordSecretRef.key }}
+ path: truststore.pass
+ {{- end }}
+ {{- end -}}
+{{- end -}}
diff --git a/kubernetes/common/cmpv2Certificate/requirements.yaml b/kubernetes/common/cmpv2Certificate/requirements.yaml
index 87509d11bc..b10896d2ce 100644
--- a/kubernetes/common/cmpv2Certificate/requirements.yaml
+++ b/kubernetes/common/cmpv2Certificate/requirements.yaml
@@ -19,3 +19,6 @@ dependencies:
- name: repositoryGenerator
version: ~8.x-0
repository: 'file://../repositoryGenerator'
+ - name: cmpv2Config
+ version: ~8.x-0
+ repository: 'file://../cmpv2Config'
diff --git a/kubernetes/common/cmpv2Certificate/templates/_certServiceClient.tpl b/kubernetes/common/cmpv2Certificate/templates/_certServiceClient.tpl
index 58cc9c7249..f80b06b4d3 100644
--- a/kubernetes/common/cmpv2Certificate/templates/_certServiceClient.tpl
+++ b/kubernetes/common/cmpv2Certificate/templates/_certServiceClient.tpl
@@ -62,7 +62,7 @@ There also need to be some includes used in a target component deployment (inden
{{- define "common.certServiceClient.initContainer" -}}
{{- $dot := default . .dot -}}
-{{- $initRoot := default $dot.Values.cmpv2Certificate .initRoot -}}
+{{- $initRoot := default $dot.Values.cmpv2Certificate.cmpv2Config .initRoot -}}
{{- $subchartGlobal := mergeOverwrite (deepCopy $initRoot.global) $dot.Values.global -}}
{{- if and $subchartGlobal.cmpv2Enabled (not $subchartGlobal.CMPv2CertManagerIntegration) -}}
{{- range $index, $certificate := $dot.Values.certificates -}}
@@ -97,11 +97,14 @@ There also need to be some includes used in a target component deployment (inden
{{- $requestUrl := $subchartGlobal.platform.certServiceClient.envVariables.requestURL -}}
{{- $certPath := $subchartGlobal.platform.certServiceClient.envVariables.certPath -}}
{{- $requestTimeout := $subchartGlobal.platform.certServiceClient.envVariables.requestTimeout -}}
-{{- $certificatesSecretMountPath := $subchartGlobal.platform.certServiceClient.secret.mountPath -}}
-{{- $keystorePath := $subchartGlobal.platform.certServiceClient.envVariables.keystorePath -}}
-{{- $keystorePassword := $subchartGlobal.platform.certServiceClient.envVariables.keystorePassword -}}
-{{- $truststorePath := $subchartGlobal.platform.certServiceClient.envVariables.truststorePath -}}
-{{- $truststorePassword := $subchartGlobal.platform.certServiceClient.envVariables.truststorePassword -}}
+{{- $certificatesSecret:= $subchartGlobal.platform.certServiceClient.clientSecretName -}}
+{{- $certificatesSecretMountPath := $subchartGlobal.platform.certServiceClient.certificatesSecretMountPath -}}
+{{- $keystorePath := (printf "%s%s" $subchartGlobal.platform.certServiceClient.certificatesSecretMountPath $subchartGlobal.platform.certificates.keystoreKeyRef ) -}}
+{{- $keystorePasswordSecret := $subchartGlobal.platform.certificates.keystorePasswordSecretName -}}
+{{- $keystorePasswordSecretKey := $subchartGlobal.platform.certificates.keystorePasswordSecretKey -}}
+{{- $truststorePath := (printf "%s%s" $subchartGlobal.platform.certServiceClient.certificatesSecretMountPath $subchartGlobal.platform.certificates.truststoreKeyRef ) -}}
+{{- $truststorePasswordSecret := $subchartGlobal.platform.certificates.truststorePasswordSecretName -}}
+{{- $truststorePasswordSecretKey := $subchartGlobal.platform.certificates.truststorePasswordSecretKey -}}
- name: certs-init-{{ $index }}
image: {{ include "repositoryGenerator.image.certserviceclient" $dot }}
imagePullPolicy: {{ $dot.Values.global.pullPolicy | default $dot.Values.pullPolicy }}
@@ -133,11 +136,17 @@ There also need to be some includes used in a target component deployment (inden
- name: KEYSTORE_PATH
value: {{ $keystorePath | quote }}
- name: KEYSTORE_PASSWORD
- value: {{ $keystorePassword | quote }}
+ valueFrom:
+ secretKeyRef:
+ name: {{ $keystorePasswordSecret | quote}}
+ key: {{ $keystorePasswordSecretKey | quote}}
- name: TRUSTSTORE_PATH
value: {{ $truststorePath | quote }}
- name: TRUSTSTORE_PASSWORD
- value: {{ $truststorePassword | quote }}
+ valueFrom:
+ secretKeyRef:
+ name: {{ $truststorePasswordSecret | quote}}
+ key: {{ $truststorePasswordSecretKey | quote}}
terminationMessagePath: /dev/termination-log
terminationMessagePolicy: File
volumeMounts:
@@ -151,10 +160,10 @@ There also need to be some includes used in a target component deployment (inden
{{- define "common.certServiceClient.volumes" -}}
{{- $dot := default . .dot -}}
-{{- $initRoot := default $dot.Values.cmpv2Certificate .initRoot -}}
+{{- $initRoot := default $dot.Values.cmpv2Certificate.cmpv2Config .initRoot -}}
{{- $subchartGlobal := mergeOverwrite (deepCopy $initRoot.global) $dot.Values.global -}}
{{- if and $subchartGlobal.cmpv2Enabled (not $subchartGlobal.CMPv2CertManagerIntegration) -}}
-{{- $certificatesSecretName := $subchartGlobal.platform.certServiceClient.secret.name -}}
+{{- $certificatesSecretName := $subchartGlobal.platform.certificates.clientSecretName -}}
- name: certservice-tls-volume
secret:
secretName: {{ $certificatesSecretName }}
@@ -168,7 +177,7 @@ There also need to be some includes used in a target component deployment (inden
{{- define "common.certServiceClient.volumeMounts" -}}
{{- $dot := default . .dot -}}
-{{- $initRoot := default $dot.Values.cmpv2Certificate .initRoot -}}
+{{- $initRoot := default $dot.Values.cmpv2Certificate.cmpv2Config .initRoot -}}
{{- $subchartGlobal := mergeOverwrite (deepCopy $initRoot.global) $dot.Values.global -}}
{{- if and $subchartGlobal.cmpv2Enabled (not $subchartGlobal.CMPv2CertManagerIntegration) -}}
{{- range $index, $certificate := $dot.Values.certificates -}}
diff --git a/kubernetes/common/cmpv2Certificate/values.yaml b/kubernetes/common/cmpv2Certificate/values.yaml
index b7531431c4..504947525d 100644
--- a/kubernetes/common/cmpv2Certificate/values.yaml
+++ b/kubernetes/common/cmpv2Certificate/values.yaml
@@ -11,38 +11,3 @@
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
-
-#################################################################
-# Global configuration default values that can be inherited by
-# all subcharts.
-#################################################################
-global:
- # Enabling CMPv2
- cmpv2Enabled: true
- CMPv2CertManagerIntegration: false
-
- certificate:
- default:
- subject:
- organization: "Linux-Foundation"
- country: "US"
- locality: "San-Francisco"
- province: "California"
- organizationalUnit: "ONAP"
-
- platform:
- certServiceClient:
- secret:
- name: oom-cert-service-client-tls-secret
- mountPath: /etc/onap/oom/certservice/certs/
- envVariables:
- certPath: "/var/custom-certs"
- # Client configuration related
- caName: "RA"
- requestURL: "https://oom-cert-service:8443/v1/certificate/"
- requestTimeout: "30000"
- keystorePath: "/etc/onap/oom/certservice/certs/certServiceClient-keystore.jks"
- outputType: "P12"
- keystorePassword: "secret"
- truststorePath: "/etc/onap/oom/certservice/certs/truststore.jks"
- truststorePassword: "secret"
diff --git a/kubernetes/common/cmpv2Config/values.yaml b/kubernetes/common/cmpv2Config/values.yaml
index b6ee064302..695e40616c 100644
--- a/kubernetes/common/cmpv2Config/values.yaml
+++ b/kubernetes/common/cmpv2Config/values.yaml
@@ -12,22 +12,40 @@
# See the License for the specific language governing permissions and
# limitations under the License.
global:
+
+ # Enabling CMPv2
+ cmpv2Enabled: true
+ CMPv2CertManagerIntegration: false
+
+ certificate:
+ default:
+ subject:
+ organization: "Linux-Foundation"
+ country: "US"
+ locality: "San-Francisco"
+ province: "California"
+ organizationalUnit: "ONAP"
+
platform:
+ certificates:
+ clientSecretName: oom-cert-service-client-tls-secret
+ keystoreKeyRef: keystore.jks
+ truststoreKeyRef: truststore.jks
+ keystorePasswordSecretName: oom-cert-service-keystore-password
+ keystorePasswordSecretKey: password
+ truststorePasswordSecretName: oom-cert-service-truststore-password
+ truststorePasswordSecretKey: password
certServiceClient:
image: onap/org.onap.oom.platform.cert-service.oom-certservice-client:2.3.3
- secretName: oom-cert-service-client-tls-secret
+ certificatesSecretMountPath: /etc/onap/oom/certservice/certs/
envVariables:
+ certPath: "/var/custom-certs"
# Certificate related
- cmpv2Organization: "Linux-Foundation"
- cmpv2OrganizationalUnit: "ONAP"
- cmpv2Location: "San-Francisco"
- cmpv2State: "California"
- cmpv2Country: "US"
+ caName: "RA"
# Client configuration related
requestURL: "https://oom-cert-service:8443/v1/certificate/"
requestTimeout: "30000"
- keystorePassword: "secret"
- truststorePassword: "secret"
+ outputType: "P12"
certPostProcessor:
image: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
diff --git a/kubernetes/common/mariadb-galera/templates/statefulset.yaml b/kubernetes/common/mariadb-galera/templates/statefulset.yaml
index bde971ffe7..7b0d90a9aa 100644
--- a/kubernetes/common/mariadb-galera/templates/statefulset.yaml
+++ b/kubernetes/common/mariadb-galera/templates/statefulset.yaml
@@ -129,7 +129,7 @@ spec:
livenessProbe:
exec:
command:
- - bash
+ - sh
- -ec
- |
exec mysqladmin status -u$MARIADB_ROOT_USER -p$MARIADB_ROOT_PASSWORD
@@ -143,7 +143,7 @@ spec:
readinessProbe:
exec:
command:
- - bash
+ - sh
- -ec
- |
exec mysqladmin status -u$MARIADB_ROOT_USER -p$MARIADB_ROOT_PASSWORD
@@ -153,6 +153,20 @@ spec:
successThreshold: {{ .Values.readinessProbe.successThreshold }}
failureThreshold: {{ .Values.readinessProbe.failureThreshold }}
{{- end }}
+ {{- if .Values.startupProbe.enabled }}
+ startupProbe:
+ exec:
+ command:
+ - sh
+ - -ec
+ - |
+ exec mysqladmin status -u$MARIADB_ROOT_USER -p$MARIADB_ROOT_PASSWORD
+ initialDelaySeconds: {{ .Values.startupProbe.initialDelaySeconds }}
+ periodSeconds: {{ .Values.startupProbe.periodSeconds }}
+ timeoutSeconds: {{ .Values.startupProbe.timeoutSeconds }}
+ successThreshold: {{ .Values.startupProbe.successThreshold }}
+ failureThreshold: {{ .Values.startupProbe.failureThreshold }}
+ {{- end }}
resources: {{ include "common.resources" . | nindent 12 }}
volumeMounts:
- name: previous-boot
diff --git a/kubernetes/common/mariadb-galera/values.yaml b/kubernetes/common/mariadb-galera/values.yaml
index 12d2d75e38..4c77efc83f 100644
--- a/kubernetes/common/mariadb-galera/values.yaml
+++ b/kubernetes/common/mariadb-galera/values.yaml
@@ -329,6 +329,12 @@ mariadbConfiguration: |-
innodb_flush_log_at_trx_commit=2
# MYISAM REPLICATION SUPPORT #
wsrep_replicate_myisam=ON
+ binlog_format=row
+ default_storage_engine=InnoDB
+ innodb_autoinc_lock_mode=2
+ transaction-isolation=READ-COMMITTED
+ wsrep_causal_reads=1
+ wsrep_sync_wait=7
[mariadb]
plugin_load_add=auth_pam
@@ -472,18 +478,18 @@ flavor: small
resources:
small:
limits:
- cpu: 500m
- memory: 2.5Gi
+ cpu: 1
+ memory: 4Gi
requests:
- cpu: 100m
- memory: 750Mi
+ cpu: 500m
+ memory: 2Gi
large:
limits:
cpu: 2
- memory: 4Gi
+ memory: 6Gi
requests:
cpu: 1
- memory: 2Gi
+ memory: 3Gi
unlimited: {}
## MariaDB Galera containers' liveness and readiness probes
@@ -491,20 +497,29 @@ resources:
##
livenessProbe:
enabled: true
- ## Initializing the database could take some time
- ##
- initialDelaySeconds: 150
+ initialDelaySeconds: 1
periodSeconds: 10
timeoutSeconds: 1
successThreshold: 1
failureThreshold: 3
readinessProbe:
enabled: true
- initialDelaySeconds: 60
+ initialDelaySeconds: 1
periodSeconds: 10
timeoutSeconds: 1
successThreshold: 1
failureThreshold: 3
+startupProbe:
+ ## Initializing the database could take some time
+ ##
+ enabled: true
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ timeoutSeconds: 1
+ successThreshold: 1
+ # will wait up for initialDelaySeconds + failureThreshold*periodSeconds before
+ # stating startup wasn't good (910s per default)
+ failureThreshold: 90
## Pod disruption budget configuration
##
diff --git a/kubernetes/common/music/resources/config/startup.sh b/kubernetes/common/music/resources/config/startup.sh
index 37bb84de8b..e3cee36f1f 100755
--- a/kubernetes/common/music/resources/config/startup.sh
+++ b/kubernetes/common/music/resources/config/startup.sh
@@ -32,8 +32,8 @@ DEBUG_PROP=
# Debug Setup. Uses env variables
# DEBUG and DEBUG_PORT
# DEBUG=true/false | DEBUG_PORT=<Port valie must be integer>
-if [ "${DEBUG}" == "true" ]; then
- if [ "${DEBUG_PORT}" == "" ]; then
+if [ "${DEBUG}" = "true" ]; then
+ if [ "${DEBUG_PORT}" = "" ]; then
DEBUG_PORT=8000
fi
echo "Debug mode on"
diff --git a/kubernetes/common/music/values.yaml b/kubernetes/common/music/values.yaml
index 25cab910a9..f578949196 100644
--- a/kubernetes/common/music/values.yaml
+++ b/kubernetes/common/music/values.yaml
@@ -164,5 +164,4 @@ certInitializer:
credsPath: /opt/app/osaaf/local
appMountPath: /opt/app/aafcertman
aaf_add_config: >
- cd {{ .Values.credsPath }};
- /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} | grep cadi_keystore_password_jks= | cut -d= -f 2 > {{ .Values.credsPath }}/.pass 2>&1;
+ echo "$cadi_keystore_password_jks" > {{ .Values.credsPath }}/.pass;
diff --git a/kubernetes/common/repositoryGenerator/templates/_repository.tpl b/kubernetes/common/repositoryGenerator/templates/_repository.tpl
index a6b434f43a..91f21ab0c9 100644
--- a/kubernetes/common/repositoryGenerator/templates/_repository.tpl
+++ b/kubernetes/common/repositoryGenerator/templates/_repository.tpl
@@ -1,5 +1,6 @@
{{/*
# Copyright © 2017 Amdocs, Bell Canada
+# Copyright © 2021 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -86,6 +87,10 @@
{{- include "repositoryGenerator.image._helper" (merge (dict "image" "certServiceClientImage") .) }}
{{- end -}}
+{{- define "repositoryGenerator.image.dcaepolicysync" -}}
+ {{- include "repositoryGenerator.image._helper" (merge (dict "image" "dcaePolicySyncImage") .) }}
+{{- end -}}
+
{{- define "repositoryGenerator.image.envsubst" -}}
{{- include "repositoryGenerator.image._helper" (merge (dict "image" "envsubstImage") .) }}
{{- end -}}
diff --git a/kubernetes/common/repositoryGenerator/values.yaml b/kubernetes/common/repositoryGenerator/values.yaml
index 386ba9b490..8a68f6dd9c 100644
--- a/kubernetes/common/repositoryGenerator/values.yaml
+++ b/kubernetes/common/repositoryGenerator/values.yaml
@@ -1,5 +1,5 @@
# Copyright © 2020 Orange
-# Copyright © 2021 Nokia
+# Copyright © 2021 Nokia, AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -34,6 +34,7 @@ global:
nginxImage: bitnami/nginx:1.18-debian-10
postgresImage: crunchydata/crunchy-postgres:centos8-13.2-4.6.1
readinessImage: onap/oom/readiness:3.0.1
+ dcaePolicySyncImage: onap/org.onap.dcaegen2.deployments.dcae-services-policy-sync:1.0.1
# Default credentials
# they're optional. If the target repository doesn't need them, comment them
@@ -65,3 +66,4 @@ imageRepoMapping:
nginxImage: dockerHubRepository
postgresImage: dockerHubRepository
readinessImage: repository
+ dcaePolicySyncImage: repository
diff --git a/kubernetes/contrib/dns-server-for-vhost-ingress-testing/deploy_dns.sh b/kubernetes/contrib/dns-server-for-vhost-ingress-testing/deploy_dns.sh
index 657b5f9448..1a75bd7a85 100755
--- a/kubernetes/contrib/dns-server-for-vhost-ingress-testing/deploy_dns.sh
+++ b/kubernetes/contrib/dns-server-for-vhost-ingress-testing/deploy_dns.sh
@@ -86,9 +86,9 @@ deploy() {
target_machine_notice_info
}
-if [[ $# -eq 1 ]] && [[ $1 == "-h" || $1 == "--help" ]]; then
+if [[ $# -eq 1 ]] && [[ $1 = "-h" || $1 = "--help" ]]; then
usage
-elif [[ $# -eq 1 ]] && [[ $1 == "--info" ]]; then
+elif [[ $# -eq 1 ]] && [[ $1 = "--info" ]]; then
target_machine_notice_info
else
deploy $@
diff --git a/kubernetes/contrib/metallb-loadbalancer-inst/install-metallb-on-cluster.sh b/kubernetes/contrib/metallb-loadbalancer-inst/install-metallb-on-cluster.sh
index 6e412a3688..44fe79a0c6 100755
--- a/kubernetes/contrib/metallb-loadbalancer-inst/install-metallb-on-cluster.sh
+++ b/kubernetes/contrib/metallb-loadbalancer-inst/install-metallb-on-cluster.sh
@@ -76,7 +76,7 @@ manual_configuration() {
generate_config_map $@
}
-if [[ $# -eq 1 ]] && [[ $1 == "-h" || $1 == "--help" ]]; then
+if [[ $# -eq 1 ]] && [[ $1 = "-h" || $1 = "--help" ]]; then
usage
elif [[ $# -eq 0 ]]; then
automatic_configuration
diff --git a/kubernetes/contrib/tools/check-for-staging-images.sh b/kubernetes/contrib/tools/check-for-staging-images.sh
index ce51b30b58..8c01312fa2 100755
--- a/kubernetes/contrib/tools/check-for-staging-images.sh
+++ b/kubernetes/contrib/tools/check-for-staging-images.sh
@@ -16,7 +16,7 @@
BASE_URL="https://nexus3.onap.org/repository/docker.release"
-if [ "$GERRIT_BRANCH" == "staging" ]; then
+if [ "$GERRIT_BRANCH" = "staging" ]; then
exit 0
fi
diff --git a/kubernetes/contrib/tools/rke/rke_setup.sh b/kubernetes/contrib/tools/rke/rke_setup.sh
index cde7d4caa0..7950e0cc88 100755
--- a/kubernetes/contrib/tools/rke/rke_setup.sh
+++ b/kubernetes/contrib/tools/rke/rke_setup.sh
@@ -258,14 +258,14 @@ EOF
helm init --service-account tiller
kubectl -n kube-system rollout status deploy/tiller-deploy
echo "upgrade server side of helm in kubernetes"
- if [ "$USERNAME" == "root" ]; then
+ if [ "$USERNAME" = "root" ]; then
helm version
else
sudo helm version
fi
echo "sleep 30"
sleep 30
- if [ "$USERNAME" == "root" ]; then
+ if [ "$USERNAME" = "root" ]; then
helm init --upgrade
else
sudo helm init --upgrade
@@ -273,13 +273,13 @@ EOF
echo "sleep 30"
sleep 30
echo "verify both versions are the same below"
- if [ "$USERNAME" == "root" ]; then
+ if [ "$USERNAME" = "root" ]; then
helm version
else
sudo helm version
fi
echo "start helm server"
- if [ "$USERNAME" == "root" ]; then
+ if [ "$USERNAME" = "root" ]; then
helm serve &
else
sudo helm serve &
@@ -287,7 +287,7 @@ EOF
echo "sleep 30"
sleep 30
echo "add local helm repo"
- if [ "$USERNAME" == "root" ]; then
+ if [ "$USERNAME" = "root" ]; then
helm repo add local http://127.0.0.1:8879
helm repo list
else
diff --git a/kubernetes/cps/resources/config/application.yml b/kubernetes/cps/resources/config/application-helm.yml
index d85d341081..5f19007231 100755
--- a/kubernetes/cps/resources/config/application.yml
+++ b/kubernetes/cps/resources/config/application-helm.yml
@@ -50,7 +50,7 @@ spring:
liquibase:
change-log: classpath:changelog/changelog-master.yaml
- labels: ${LIQUIBASE_LABELS}
+ labels: {{ .Values.config.liquibaseLabels }}
security:
# comma-separated uri patterns which do not require authorization
@@ -79,3 +79,9 @@ logging:
level:
org:
springframework: {{ .Values.logging.level }}
+
+{{- if .Values.config.additional }}
+{{ toYaml .Values.config.additional | nindent 2 }}
+{{- end }}
+
+# Last empty line is required otherwise the last property will be missing from application.yml file in the pod.
diff --git a/kubernetes/cps/templates/deployment.yaml b/kubernetes/cps/templates/deployment.yaml
index 861782a0b9..61877c38a0 100755
--- a/kubernetes/cps/templates/deployment.yaml
+++ b/kubernetes/cps/templates/deployment.yaml
@@ -74,6 +74,9 @@ spec:
path: {{ .Values.readiness.path }}
initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: SPRING_PROFILES_ACTIVE
+ value: {{ .Values.config.spring.profile }}
resources: {{ include "common.resources" . | nindent 10 }}
{{- if .Values.nodeSelector }}
nodeSelector: {{ toYaml .Values.nodeSelector | nindent 12 }}
@@ -82,8 +85,8 @@ spec:
affinity: {{ toYaml .Values.affinity | nindent 12 }}
{{- end }}
volumeMounts:
- - mountPath: /app/resources/application.yml
- subPath: application.yml
+ - mountPath: /app/resources/application-helm.yml
+ subPath: application-helm.yml
name: init-data
- mountPath: /app/resources/logback.xml
subPath: logback.xml
diff --git a/kubernetes/cps/values.yaml b/kubernetes/cps/values.yaml
index ea4639f315..2312a4994d 100755
--- a/kubernetes/cps/values.yaml
+++ b/kubernetes/cps/values.yaml
@@ -127,8 +127,16 @@ config:
# REST API basic authentication credentials (passsword is generated if not provided)
appUserName: cpsuser
+ spring:
+ profile: helm
#appUserPassword:
+# Any new property can be added in the env by setting in overrides in the format mentioned below
+# All the added properties must be in "key: value" format insead of yaml.
+# additional:
+# spring.config.max-size: 200
+# spring.config.min-size: 10
+
logging:
level: INFO
path: /tmp
diff --git a/kubernetes/dcaegen2-services/common/dcaegen2-services-common/templates/_deployment.tpl b/kubernetes/dcaegen2-services/common/dcaegen2-services-common/templates/_deployment.tpl
index c03be83264..db58726893 100644
--- a/kubernetes/dcaegen2-services/common/dcaegen2-services-common/templates/_deployment.tpl
+++ b/kubernetes/dcaegen2-services/common/dcaegen2-services-common/templates/_deployment.tpl
@@ -2,6 +2,7 @@
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# Copyright (c) 2021 AT&T Intellectual Property. All rights reserved.
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -17,6 +18,56 @@
# ============LICENSE_END=========================================================
*/}}
{{/*
+For internal use only!
+
+dcaegen2-services-common._ms-specific-env-vars:
+This template generates a list of microservice-specific environment variables
+as specified in .Values.applicationEnv. The
+dcaegen2-services-common.microServiceDeployment uses this template
+to add the microservice-specific environment variables to the microservice's container.
+These environment variables are in addition to a standard set of environment variables
+provided to all microservices.
+
+The template expects a single argument, pointing to the caller's global context.
+
+Microservice-specific environment variables can be specified in two ways:
+ 1. As literal string values.
+ 2. As values that are sourced from a secret, identified by the secret's
+ uid and the key within the secret that provides the value.
+
+The following example shows an example of each type. The example assumes
+that a secret has been created using the OOM common secret mechanism, with
+a secret uid "example-secret" and a key called "password".
+
+applicationEnv:
+ APPLICATION_PASSWORD:
+ secretUid: example-secret
+ key: password
+ APPLICATION_EXAMPLE: "An example value"
+
+The example would set two environment variables on the microservice's container,
+one called "APPLICATION_PASSWORD" with the value set from the "password" key in
+the secret with uid "example-secret", and one called "APPLICATION_EXAMPLE" set to
+the the literal string "An example value".
+*/}}
+{{- define "dcaegen2-services-common._ms-specific-env-vars" -}}
+ {{- $global := . }}
+ {{- if .Values.applicationEnv }}
+ {{- range $envName, $envValue := .Values.applicationEnv }}
+ {{- if kindIs "string" $envValue }}
+- name: {{ $envName }}
+ value: {{ $envValue | quote }}
+ {{- else }}
+ {{ if or (not $envValue.secretUid) (not $envValue.key) }}
+ {{ fail (printf "Env %s definition is not a string and does not contain secretUid or key fields" $envName) }}
+ {{- end }}
+- name: {{ $envName }}
+ {{- include "common.secret.envFromSecretFast" (dict "global" $global "uid" $envValue.secretUid "key" $envValue.key) | indent 2 }}
+ {{- end -}}
+ {{- end }}
+ {{- end }}
+{{- end -}}
+{{/*
dcaegen2-services-common.microserviceDeployment:
This template produces a Kubernetes Deployment for a DCAE microservice.
@@ -63,12 +114,21 @@ certificate information will include a server cert and key, in various
formats. It will also include the AAF CA cert. If the microservice is
a TLS client only (indicated by setting .Values.tlsServer to false), the
certificate information includes only the AAF CA cert.
+
+Deployed POD may also include a Policy-sync sidecar container.
+The sidecar is included if .Values.policies is set. The
+Policy-sync sidecar polls PolicyEngine (PDP) periodically based
+on .Values.policies.duration and configuration retrieved is shared with
+DCAE Microservice container by common volume. Policy can be retrieved based on
+list of policyID or filter
*/}}
{{- define "dcaegen2-services-common.microserviceDeployment" -}}
{{- $logDir := default "" .Values.logDirectory -}}
{{- $certDir := default "" .Values.certDirectory . -}}
{{- $tlsServer := default "" .Values.tlsServer -}}
+{{- $policy := default "" .Values.policies -}}
+
apiVersion: apps/v1
kind: Deployment
metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
@@ -130,6 +190,7 @@ spec:
- mountPath: /opt/app/osaaf
name: tls-info
{{- end }}
+ {{ include "dcaegen2-services-common._certPostProcessor" . | nindent 4 }}
containers:
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
@@ -137,7 +198,7 @@ spec:
env:
{{- if $certDir }}
- name: DCAE_CA_CERTPATH
- value: {{ $certDir}}/cacert.pem
+ value: {{ $certDir }}/cacert.pem
{{- end }}
- name: CONSUL_HOST
value: consul-server.onap
@@ -150,12 +211,7 @@ spec:
fieldRef:
apiVersion: v1
fieldPath: status.podIP
- {{- if .Values.applicationEnv }}
- {{- range $envName, $envValue := .Values.applicationEnv }}
- - name: {{ $envName }}
- value: {{ $envValue | quote }}
- {{- end }}
- {{- end }}
+ {{- include "dcaegen2-services-common._ms-specific-env-vars" . | nindent 8 }}
{{- if .Values.service }}
ports: {{ include "common.containerPorts" . | nindent 10 }}
{{- end }}
@@ -180,8 +236,9 @@ spec:
{{- end }}
{{- end }}
resources: {{ include "common.resources" . | nindent 2 }}
- {{- if or $logDir $certDir }}
volumeMounts:
+ - mountPath: /app-config
+ name: app-config
{{- if $logDir }}
- mountPath: {{ $logDir}}
name: component-log
@@ -189,7 +246,13 @@ spec:
{{- if $certDir }}
- mountPath: {{ $certDir }}
name: tls-info
+ {{- if and .Values.certificates .Values.global.cmpv2Enabled .Values.global.CMPv2CertManagerIntegration -}}
+ {{- include "common.certManager.volumeMountsReadOnly" . | nindent 8 -}}
+ {{- end -}}
{{- end }}
+ {{- if $policy }}
+ - name: policy-shared
+ mountPath: /etc/policies
{{- end }}
{{- if $logDir }}
- image: {{ include "repositoryGenerator.image.logging" . }}
@@ -211,6 +274,53 @@ spec:
name: filebeat-conf
subPath: filebeat.yml
{{- end }}
+ {{- if $policy }}
+ - image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.dcaePolicySyncImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: policy-sync
+ env:
+ - name: POD_IP
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: status.podIP
+ - name: POLICY_SYNC_PDP_USER
+ valueFrom:
+ secretKeyRef:
+ name: onap-policy-xacml-pdp-api-creds
+ key: login
+ - name: POLICY_SYNC_PDP_PASS
+ valueFrom:
+ secretKeyRef:
+ name: onap-policy-xacml-pdp-api-creds
+ key: password
+ - name: POLICY_SYNC_PDP_URL
+ value : http{{ if (include "common.needTLS" .) }}s{{ end }}://policy-xacml-pdp:6969
+ - name: POLICY_SYNC_OUTFILE
+ value : "/etc/policies/policies.json"
+ - name: POLICY_SYNC_V1_DECISION_ENDPOINT
+ value : "policy/pdpx/v1/decision"
+ {{- if $policy.filter }}
+ - name: POLICY_SYNC_FILTER
+ value: {{ $policy.filter }}
+ {{- end -}}
+ {{- if $policy.policyID }}
+ - name: POLICY_SYNC_ID
+ value: {{ $policy.policyID }}
+ {{- end -}}
+ {{- if $policy.duration }}
+ - name: POLICY_SYNC_DURATION
+ value: {{ $policy.duration }}
+ {{- end }}
+ resources: {{ include "common.resources" . | nindent 2 }}
+ volumeMounts:
+ - mountPath: /etc/policies
+ name: policy-shared
+ {{- if $certDir }}
+ - mountPath: /opt/ca-certificates/
+ name: tls-info
+ {{- end }}
+ {{- end }}
hostname: {{ include "common.name" . }}
volumes:
- configMap:
@@ -233,7 +343,60 @@ spec:
{{- if $certDir }}
- emptyDir: {}
name: tls-info
+ {{ if and .Values.certificates .Values.global.cmpv2Enabled .Values.global.CMPv2CertManagerIntegration -}}
+ {{ include "common.certManager.volumesReadOnly" . | nindent 6 }}
+ {{- end }}
+ {{- end }}
+ {{- if $policy }}
+ - name: policy-shared
+ emptyDir: {}
{{- end }}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
{{ end -}}
+
+{{/*
+ For internal use
+
+ Template to attach CertPostProcessor which merges CMPv2 truststore with AAF truststore
+ and swaps keystore files.
+*/}}
+{{- define "dcaegen2-services-common._certPostProcessor" -}}
+ {{- $certDir := default "" .Values.certDirectory . -}}
+ {{- if and $certDir .Values.certificates .Values.global.cmpv2Enabled .Values.global.CMPv2CertManagerIntegration -}}
+ {{- $cmpv2Certificate := (index .Values.certificates 0) -}}
+ {{- $cmpv2CertificateDir := $cmpv2Certificate.mountPath -}}
+ {{- $certType := "pem" -}}
+ {{- if $cmpv2Certificate.keystore -}}
+ {{- $certType = (index $cmpv2Certificate.keystore.outputType 0) -}}
+ {{- end -}}
+ {{- $truststoresPaths := printf "%s/%s:%s/%s" $certDir "cacert.pem" $cmpv2CertificateDir "ca.crt" -}}
+ {{- $truststoresPasswordPaths := "" -}}
+ {{- $keystoreSourcePaths := printf "%s/%s:%s/%s" $cmpv2CertificateDir "tls.crt" $cmpv2CertificateDir "tls.key" -}}
+ {{- $keystoreDestinationPaths := printf "%s/%s:%s/%s" $certDir "cert.pem" $certDir "key.pem" -}}
+ {{- if not (eq $certType "pem") -}}
+ {{- $truststoresPaths = printf "%s/%s:%s/%s.%s" $certDir "trust.jks" $cmpv2CertificateDir "truststore" $certType -}}
+ {{- $truststoresPasswordPaths = printf "%s/%s:%s/%s" $certDir "trust.pass" $cmpv2CertificateDir "truststore.pass" -}}
+ {{- $keystoreSourcePaths = printf "%s/%s.%s:%s/%s" $cmpv2CertificateDir "keystore" $certType $cmpv2CertificateDir "keystore.pass" -}}
+ {{- $keystoreDestinationPaths = printf "%s/%s.%s:%s/%s.pass" $certDir "cert" $certType $certDir $certType -}}
+ {{- end }}
+ - name: cert-post-processor
+ image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.certPostProcessorImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ resources:
+ {{- include "common.resources" . | nindent 4 }}
+ volumeMounts:
+ - mountPath: {{ $certDir }}
+ name: tls-info
+ {{- include "common.certManager.volumeMountsReadOnly" . | nindent 4 }}
+ env:
+ - name: TRUSTSTORES_PATHS
+ value: {{ $truststoresPaths | quote}}
+ - name: TRUSTSTORES_PASSWORDS_PATHS
+ value: {{ $truststoresPasswordPaths | quote }}
+ - name: KEYSTORE_SOURCE_PATHS
+ value: {{ $keystoreSourcePaths | quote }}
+ - name: KEYSTORE_DESTINATION_PATHS
+ value: {{ $keystoreDestinationPaths | quote }}
+ {{- end }}
+{{- end -}}
diff --git a/kubernetes/dcaegen2-services/common/dcaegen2-services-common/values.yaml b/kubernetes/dcaegen2-services/common/dcaegen2-services-common/values.yaml
index cd69da8346..cbd07dc486 100644
--- a/kubernetes/dcaegen2-services/common/dcaegen2-services-common/values.yaml
+++ b/kubernetes/dcaegen2-services/common/dcaegen2-services-common/values.yaml
@@ -15,4 +15,4 @@
# limitations under the License.
# ============LICENSE_END=========================================================
# dcaegen2-services-common templates get any values from the scope
-# they are passed. There are no locally-defined values. \ No newline at end of file
+# they are passed. There are no locally-defined values.
diff --git a/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/requirements.yaml b/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/requirements.yaml
index 639fc2c740..929cdbbc5f 100644
--- a/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/requirements.yaml
+++ b/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/requirements.yaml
@@ -1,4 +1,5 @@
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# Copyright (c) 2021 Nokia. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -25,3 +26,6 @@ dependencies:
- name: dcaegen2-services-common
version: ~8.x-0
repository: 'file://../../common/dcaegen2-services-common'
+ - name: certManagerCertificate
+ version: ~8.x-0
+ repository: '@local'
diff --git a/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/templates/certificates.yaml b/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/templates/certificates.yaml
new file mode 100644
index 0000000000..0db2138a4f
--- /dev/null
+++ b/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/templates/certificates.yaml
@@ -0,0 +1,19 @@
+{{/*
+# Copyright © 2021 Nokia
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{ if and .Values.certDirectory .Values.global.cmpv2Enabled .Values.global.CMPv2CertManagerIntegration }}
+{{ include "certManagerCertificate.certificate" . }}
+{{ end }}
diff --git a/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/values.yaml b/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/values.yaml
index cec332218d..502e3a89dc 100644
--- a/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/values.yaml
+++ b/kubernetes/dcaegen2-services/components/dcae-hv-ves-collector/values.yaml
@@ -1,6 +1,7 @@
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# Copyright (c) 2021 Nokia. All rights reserved.
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -34,6 +35,7 @@ filebeatConfig:
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
#################################################################
# Application configuration defaults.
@@ -62,6 +64,22 @@ secrets:
password: '{{ .Values.aafCreds.password }}'
passwordPolicy: required
+# CMPv2 certificate
+certificates:
+ - mountPath: /etc/ves-hv/ssl/external
+ commonName: dcae-hv-ves-collector
+ dnsNames:
+ - dcae-hv-ves-collector
+ - hv-ves-collector
+ - hv-ves
+ keystore:
+ outputType:
+ - jks
+ passwordSecretRef:
+ name: hv-ves-cmpv2-keystore-password
+ key: password
+ create: true
+
# dependencies
readinessCheck:
wait_for:
diff --git a/kubernetes/dcaegen2-services/components/dcae-tcagen2/values.yaml b/kubernetes/dcaegen2-services/components/dcae-tcagen2/values.yaml
index da6dc8f1fc..89cf13447a 100644
--- a/kubernetes/dcaegen2-services/components/dcae-tcagen2/values.yaml
+++ b/kubernetes/dcaegen2-services/components/dcae-tcagen2/values.yaml
@@ -1,6 +1,7 @@
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# Copyright (c) 2021 AT&T Intellectual Property. All rights reserved.
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -35,6 +36,7 @@ filebeatConfig:
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+
#################################################################
# Application configuration defaults.
#################################################################
@@ -84,6 +86,17 @@ service:
- port: 9091
name: http
+# Policy configuraiton properties
+# if present, policy-sync side car will be deployed
+
+#dcaePolicySyncImage: onap/org.onap.dcaegen2.deployments.dcae-services-policy-sync:1.0.1
+#policies:
+# duration: 300
+# policyID: |
+# '["onap.vfirewall.tca","abc"]'
+# filter: |
+# '["DCAE.Config_vfirewall_.*"]'
+
aaiCreds:
user: DCAE
password: DCAE
diff --git a/kubernetes/dcaegen2-services/components/dcae-ves-collector/requirements.yaml b/kubernetes/dcaegen2-services/components/dcae-ves-collector/requirements.yaml
index 639fc2c740..929cdbbc5f 100644
--- a/kubernetes/dcaegen2-services/components/dcae-ves-collector/requirements.yaml
+++ b/kubernetes/dcaegen2-services/components/dcae-ves-collector/requirements.yaml
@@ -1,4 +1,5 @@
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# Copyright (c) 2021 Nokia. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -25,3 +26,6 @@ dependencies:
- name: dcaegen2-services-common
version: ~8.x-0
repository: 'file://../../common/dcaegen2-services-common'
+ - name: certManagerCertificate
+ version: ~8.x-0
+ repository: '@local'
diff --git a/kubernetes/dcaegen2-services/components/dcae-ves-collector/templates/certificates.yaml b/kubernetes/dcaegen2-services/components/dcae-ves-collector/templates/certificates.yaml
new file mode 100644
index 0000000000..0db2138a4f
--- /dev/null
+++ b/kubernetes/dcaegen2-services/components/dcae-ves-collector/templates/certificates.yaml
@@ -0,0 +1,19 @@
+{{/*
+# Copyright © 2021 Nokia
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{ if and .Values.certDirectory .Values.global.cmpv2Enabled .Values.global.CMPv2CertManagerIntegration }}
+{{ include "certManagerCertificate.certificate" . }}
+{{ end }}
diff --git a/kubernetes/dcaegen2-services/components/dcae-ves-collector/values.yaml b/kubernetes/dcaegen2-services/components/dcae-ves-collector/values.yaml
index 62c640453b..263715650e 100644
--- a/kubernetes/dcaegen2-services/components/dcae-ves-collector/values.yaml
+++ b/kubernetes/dcaegen2-services/components/dcae-ves-collector/values.yaml
@@ -1,6 +1,7 @@
#============LICENSE_START========================================================
# ================================================================================
# Copyright (c) 2021 J. F. Lucas. All rights reserved.
+# Copyright (c) 2021 Nokia. All rights reserved.
# ================================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -34,6 +35,7 @@ filebeatConfig:
#################################################################
tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:2.1.0
consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.1.0
+certPostProcessorImage: onap/org.onap.oom.platform.cert-service.oom-certservice-post-processor:2.3.3
#################################################################
# Application configuration defaults.
@@ -55,6 +57,22 @@ certDirectory: /opt/app/dcae-certificate
# and key from AAF and mount them in certDirectory.
tlsServer: true
+# CMPv2 certificate
+certificates:
+ - mountPath: /opt/app/dcae-certificate/external
+ commonName: dcae-ves-collector
+ dnsNames:
+ - dcae-ves-collector
+ - ves-collector
+ - ves
+ keystore:
+ outputType:
+ - jks
+ passwordSecretRef:
+ name: ves-cmpv2-keystore-password
+ key: password
+ create: true
+
# dependencies
readinessCheck:
wait_for:
diff --git a/kubernetes/dcaegen2/components/dcae-cloudify-manager/resources/config/plugins/k8s-plugin.json b/kubernetes/dcaegen2/components/dcae-cloudify-manager/resources/config/plugins/k8s-plugin.json
index 6018abe309..3c769fca5f 100644
--- a/kubernetes/dcaegen2/components/dcae-cloudify-manager/resources/config/plugins/k8s-plugin.json
+++ b/kubernetes/dcaegen2/components/dcae-cloudify-manager/resources/config/plugins/k8s-plugin.json
@@ -44,14 +44,18 @@
"image_tag": "{{ include "repositoryGenerator.repository" . }}/{{ .Values.cmpv2Config.global.platform.certServiceClient.image }}",
"request_url": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.requestURL }}",
"timeout": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.requestTimeout }}",
- "country": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.cmpv2Country }}",
- "organization": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.cmpv2Organization }}",
- "state": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.cmpv2State }}",
- "organizational_unit": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.cmpv2OrganizationalUnit }}",
- "location": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.cmpv2Location }}",
- "cert_secret_name": "{{ .Values.cmpv2Config.global.platform.certServiceClient.secretName }}",
- "keystore_password": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.keystorePassword }}",
- "truststore_password": "{{ .Values.cmpv2Config.global.platform.certServiceClient.envVariables.truststorePassword }}"
+ "country": "{{ .Values.cmpv2Config.global.certificate.default.subject.country }}",
+ "organization": "{{ .Values.cmpv2Config.global.certificate.default.subject.organization }}",
+ "state": "{{ .Values.cmpv2Config.global.certificate.default.subject.province }}",
+ "organizational_unit": "{{ .Values.cmpv2Config.global.certificate.default.subject.organizationalUnit }}",
+ "location": "{{ .Values.cmpv2Config.global.certificate.default.subject.locality }}",
+ "cert_secret_name": "{{ .Values.cmpv2Config.global.platform.certificates.clientSecretName }}",
+ "keystore_secret_key": "{{ .Values.cmpv2Config.global.platform.certificates.keystoreKeyRef }}",
+ "truststore_secret_key": "{{ .Values.cmpv2Config.global.platform.certificates.truststoreKeyRef }}",
+ "keystore_password_secret_name": "{{ .Values.cmpv2Config.global.platform.certificates.keystorePasswordSecretName }}",
+ "keystore_password_secret_key": "{{ .Values.cmpv2Config.global.platform.certificates.keystorePasswordSecretKey }}",
+ "truststore_password_secret_name": "{{ .Values.cmpv2Config.global.platform.certificates.truststorePasswordSecretName }}",
+ "truststore_password_secret_key": "{{ .Values.cmpv2Config.global.platform.certificates.truststorePasswordSecretKey }}"
},
"cert_post_processor": {
"image_tag": "{{ include "repositoryGenerator.repository" . }}/{{ .Values.cmpv2Config.global.platform.certPostProcessor.image }}"
diff --git a/kubernetes/dcaegen2/components/dcae-cloudify-manager/values.yaml b/kubernetes/dcaegen2/components/dcae-cloudify-manager/values.yaml
index 1135c053d9..fcc8f6d4b0 100644
--- a/kubernetes/dcaegen2/components/dcae-cloudify-manager/values.yaml
+++ b/kubernetes/dcaegen2/components/dcae-cloudify-manager/values.yaml
@@ -55,7 +55,7 @@ config:
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.dcaegen2.deployments.cm-container:4.4.2
+image: onap/org.onap.dcaegen2.deployments.cm-container:4.5.0
pullPolicy: Always
# name of shared ConfigMap with kubeconfig for multiple clusters
diff --git a/kubernetes/dcaegen2/components/dcae-dashboard/values.yaml b/kubernetes/dcaegen2/components/dcae-dashboard/values.yaml
index e92e415414..51fcd08c4a 100644
--- a/kubernetes/dcaegen2/components/dcae-dashboard/values.yaml
+++ b/kubernetes/dcaegen2/components/dcae-dashboard/values.yaml
@@ -53,7 +53,7 @@ config:
# Application configuration defaults.
#################################################################
# application image
-image: onap/org.onap.ccsdk.dashboard.ccsdk-app-os:1.4.0
+image: onap/org.onap.ccsdk.dashboard.ccsdk-app-os:1.4.2
pullPolicy: Always
# probe configuration parameters
@@ -66,8 +66,8 @@ liveness:
enabled: false
readiness:
- initialDelaySeconds: 30
- periodSeconds: 30
+ initialDelaySeconds: 300
+ periodSeconds: 90
path: /ccsdk-app/health
scheme: HTTPS
@@ -103,11 +103,11 @@ flavor: small
resources:
small:
limits:
- cpu: 2
- memory: 2Gi
- requests:
- cpu: 1
+ cpu: 0.6
memory: 1Gi
+ requests:
+ cpu: 0.4
+ memory: 600Mib
large:
limits:
cpu: 4
diff --git a/kubernetes/helm/plugins/deploy/deploy.sh b/kubernetes/helm/plugins/deploy/deploy.sh
index 3bcb404032..44e8e56aa5 100755
--- a/kubernetes/helm/plugins/deploy/deploy.sh
+++ b/kubernetes/helm/plugins/deploy/deploy.sh
@@ -2,7 +2,7 @@
usage() {
cat << EOF
-Install (or upgrade) an umbrella Helm Chart, and its subcharts, as separate Helm Releases
+Install (or upgrade) an umbrella Helm Chart, and its subcharts, as separate Helm Releases
The umbrella Helm Chart is broken apart into a parent release and subchart releases.
Subcharts the are disabled (<chart>.enabled=false) will not be installed or upgraded.
@@ -49,12 +49,12 @@ generate_overrides() {
for index in "${!SUBCHART_NAMES[@]}"; do
START=${SUBCHART_NAMES[index]}
END=${SUBCHART_NAMES[index+1]}
- if [[ $START == "global:" ]]; then
+ if [[ $START = "global:" ]]; then
echo "global:" > $GLOBAL_OVERRIDES
cat $COMPUTED_OVERRIDES | sed '/common:/,/consul:/d' \
| sed -n '/^'"$START"'/,/'log:'/p' | sed '1d;$d' >> $GLOBAL_OVERRIDES
else
- SUBCHART_DIR="$CACHE_SUBCHART_DIR/$(cut -d':' -f1 <<<"$START")"
+ SUBCHART_DIR="$CACHE_SUBCHART_DIR/$(echo "$START" |cut -d':' -f1)"
if [[ -d "$SUBCHART_DIR" ]]; then
if [[ -z "$END" ]]; then
cat $COMPUTED_OVERRIDES | sed -n '/^'"$START"'/,/'"$END"'/p' \
@@ -72,11 +72,11 @@ resolve_deploy_flags() {
n=${#flags[*]}
for (( i = 0; i < n; i++ )); do
PARAM=${flags[i]}
- if [[ $PARAM == "-f" || \
- $PARAM == "--values" || \
- $PARAM == "--set" || \
- $PARAM == "--set-string" || \
- $PARAM == "--version" ]]; then
+ if [[ $PARAM = "-f" || \
+ $PARAM = "--values" || \
+ $PARAM = "--set" || \
+ $PARAM = "--set-string" || \
+ $PARAM = "--version" ]]; then
# skip param and its value
i=$((i + 1))
else
@@ -96,9 +96,9 @@ deploy() {
RELEASE=$1
CHART_URL=$2
FLAGS=${@:3}
- CHART_REPO="$(cut -d'/' -f1 <<<"$CHART_URL")"
- CHART_NAME="$(cut -d'/' -f2 <<<"$CHART_URL")"
- if [[ $HELM_VER == "v3."* ]]; then
+ CHART_REPO="$(echo "$CHART_URL" |cut -d'/' -f1)"
+ CHART_NAME="$(echo "$CHART_URL" |cut -d'/' -f2)"
+ if [[ $HELM_VER = "v3."* ]]; then
CACHE_DIR=~/.local/share/helm/plugins/deploy/cache
else
CACHE_DIR=~/.helm/plugins/deploy/cache
@@ -146,10 +146,10 @@ deploy() {
DEPLOY_FLAGS=$(resolve_deploy_flags "$FLAGS")
# determine if upgrading individual subchart or entire parent + subcharts
- SUBCHART_RELEASE="$(cut -d'-' -f2 <<<"$RELEASE")"
+ SUBCHART_RELEASE="$(echo "$RELEASE" |cut -d'-' -f2)"
# update specified subchart without parent
- RELEASE="$(cut -d'-' -f1 <<<"$RELEASE")"
- if [[ $SUBCHART_RELEASE == $RELEASE ]]; then
+ RELEASE="$(echo "$RELEASE" |cut -d'-' -f1)"
+ if [[ $SUBCHART_RELEASE = $RELEASE ]]; then
SUBCHART_RELEASE=
fi
@@ -201,13 +201,13 @@ deploy() {
helm upgrade -i $RELEASE $CHART_DIR $DEPLOY_FLAGS -f $COMPUTED_OVERRIDES \
> $LOG_FILE.log 2>&1
- if [[ $VERBOSE == "true" ]]; then
+ if [[ $VERBOSE = "true" ]]; then
cat $LOG_FILE
else
echo "release \"$RELEASE\" deployed"
fi
# Add annotation last-applied-configuration if set-last-applied flag is set
- if [[ $SET_LAST_APPLIED == "true" ]]; then
+ if [[ $SET_LAST_APPLIED = "true" ]]; then
helm get manifest ${RELEASE} \
| kubectl apply set-last-applied --create-annotation -n onap -f - \
> $LOG_FILE.log 2>&1
@@ -228,7 +228,7 @@ deploy() {
fi
if [[ $SUBCHART_ENABLED -eq 1 ]]; then
- if [[ -z "$SUBCHART_RELEASE" || $SUBCHART_RELEASE == "$subchart" ]]; then
+ if [[ -z "$SUBCHART_RELEASE" || $SUBCHART_RELEASE = "$subchart" ]]; then
LOG_FILE=$LOG_DIR/"${RELEASE}-${subchart}".log
:> $LOG_FILE
@@ -236,19 +236,19 @@ deploy() {
$DEPLOY_FLAGS -f $GLOBAL_OVERRIDES -f $SUBCHART_OVERRIDES \
> $LOG_FILE 2>&1
- if [[ $VERBOSE == "true" ]]; then
+ if [[ $VERBOSE = "true" ]]; then
cat $LOG_FILE
else
echo "release \"${RELEASE}-${subchart}\" deployed"
fi
# Add annotation last-applied-configuration if set-last-applied flag is set
- if [[ $SET_LAST_APPLIED == "true" ]]; then
+ if [[ $SET_LAST_APPLIED = "true" ]]; then
helm get manifest "${RELEASE}-${subchart}" \
| kubectl apply set-last-applied --create-annotation -n onap -f - \
> $LOG_FILE.log 2>&1
fi
fi
- if [[ $DELAY == "true" ]]; then
+ if [[ $DELAY = "true" ]]; then
echo sleep 3m
sleep 3m
fi
@@ -256,8 +256,8 @@ deploy() {
array=($(echo "$ALL_HELM_RELEASES" | grep "${RELEASE}-${subchart}"))
n=${#array[*]}
for (( i = n-1; i >= 0; i-- )); do
- if [[ $HELM_VER == "v3."* ]]; then
- helm del "${array[i]}"
+ if [[ $HELM_VER = "v3."* ]]; then
+ helm del "${array[i]}"
else
helm del "${array[i]}" --purge
fi
@@ -266,7 +266,7 @@ deploy() {
done
# report on success/failures of installs/upgrades
- if [[ $HELM_VER == "v3."* ]]; then
+ if [[ $HELM_VER = "v3."* ]]; then
helm ls --all-namespaces | grep -i FAILED | grep $RELEASE
else
helm ls | grep FAILED | grep $RELEASE
diff --git a/kubernetes/helm/plugins/undeploy/undeploy.sh b/kubernetes/helm/plugins/undeploy/undeploy.sh
index 8191174314..e5c0c12711 100755
--- a/kubernetes/helm/plugins/undeploy/undeploy.sh
+++ b/kubernetes/helm/plugins/undeploy/undeploy.sh
@@ -2,7 +2,7 @@
usage() {
cat << EOF
-Delete an umbrella Helm Chart, and its subcharts, that was previously deployed using 'Helm deploy'.
+Delete an umbrella Helm Chart, and its subcharts, that was previously deployed using 'Helm deploy'.
Example of deleting all Releases that have the prefix 'demo'.
$ helm undeploy demo
diff --git a/kubernetes/msb/components/msb-eag/values.yaml b/kubernetes/msb/components/msb-eag/values.yaml
index ff158b592c..3629eb43ec 100644
--- a/kubernetes/msb/components/msb-eag/values.yaml
+++ b/kubernetes/msb/components/msb-eag/values.yaml
@@ -35,27 +35,18 @@ certInitializer:
app_ns: org.osaaf.aaf
credsPath: /opt/app/osaaf/local
aaf_add_config: |
- echo "*** retrieving passwords for certificates"
- export $(/opt/app/aaf_config/bin/agent.sh local showpass \
- {{.Values.fqi}} {{ .Values.fqdn }} | grep '^c')
- if [ -z "$cadi_keystore_password_p12" ]
- then
- echo " /!\ certificates retrieval failed"
- exit 1
- else
- mkdir -p {{ .Values.credsPath }}/certs
- echo "*** retrieve certificate from pkcs12"
- openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
- -out {{ .Values.credsPath }}/certs/cert.crt -nokeys \
- -passin pass:$cadi_keystore_password_p12 \
- -passout pass:$cadi_keystore_password_p12
- echo "*** copy key to relevant place"
- cp {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.key {{ .Values.credsPath }}/certs/cert.key
- echo "*** change ownership and read/write attributes"
- chown -R 1000 {{ .Values.credsPath }}/certs
- chmod 600 {{ .Values.credsPath }}/certs/cert.crt
- chmod 600 {{ .Values.credsPath }}/certs/cert.key
- fi
+ mkdir -p {{ .Values.credsPath }}/certs
+ echo "*** retrieve certificate from pkcs12"
+ openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
+ -out {{ .Values.credsPath }}/certs/cert.crt -nokeys \
+ -passin pass:$cadi_keystore_password_p12 \
+ -passout pass:$cadi_keystore_password_p12
+ echo "*** copy key to relevant place"
+ cp {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.key {{ .Values.credsPath }}/certs/cert.key
+ echo "*** change ownership and read/write attributes"
+ chown -R 1000 {{ .Values.credsPath }}/certs
+ chmod 600 {{ .Values.credsPath }}/certs/cert.crt
+ chmod 600 {{ .Values.credsPath }}/certs/cert.key
#################################################################
# Application configuration defaults.
diff --git a/kubernetes/msb/components/msb-iag/values.yaml b/kubernetes/msb/components/msb-iag/values.yaml
index 51e78e1de3..b95a11914d 100644
--- a/kubernetes/msb/components/msb-iag/values.yaml
+++ b/kubernetes/msb/components/msb-iag/values.yaml
@@ -35,27 +35,18 @@ certInitializer:
app_ns: org.osaaf.aaf
credsPath: /opt/app/osaaf/local
aaf_add_config: |
- echo "*** retrieving passwords for certificates"
- export $(/opt/app/aaf_config/bin/agent.sh local showpass \
- {{.Values.fqi}} {{ .Values.fqdn }} | grep '^c')
- if [ -z "$cadi_keystore_password_p12" ]
- then
- echo " /!\ certificates retrieval failed"
- exit 1
- else
- mkdir -p {{ .Values.credsPath }}/certs
- echo "*** retrieve certificate from pkcs12"
- openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
- -out {{ .Values.credsPath }}/certs/cert.crt -nokeys \
- -passin pass:$cadi_keystore_password_p12 \
- -passout pass:$cadi_keystore_password_p12
- echo "*** copy key to relevant place"
- cp {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.key {{ .Values.credsPath }}/certs/cert.key
- echo "*** change ownership and read/write attributes"
- chown -R 1000 {{ .Values.credsPath }}/certs
- chmod 600 {{ .Values.credsPath }}/certs/cert.crt
- chmod 600 {{ .Values.credsPath }}/certs/cert.key
- fi
+ mkdir -p {{ .Values.credsPath }}/certs
+ echo "*** retrieve certificate from pkcs12"
+ openssl pkcs12 -in {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.p12 \
+ -out {{ .Values.credsPath }}/certs/cert.crt -nokeys \
+ -passin pass:$cadi_keystore_password_p12 \
+ -passout pass:$cadi_keystore_password_p12
+ echo "*** copy key to relevant place"
+ cp {{ .Values.credsPath }}/{{ .Values.fqi_namespace }}.key {{ .Values.credsPath }}/certs/cert.key
+ echo "*** change ownership and read/write attributes"
+ chown -R 1000 {{ .Values.credsPath }}/certs
+ chmod 600 {{ .Values.credsPath }}/certs/cert.crt
+ chmod 600 {{ .Values.credsPath }}/certs/cert.key
#################################################################
# Application configuration defaults.
diff --git a/kubernetes/onap/values.yaml b/kubernetes/onap/values.yaml
index b008acf6f3..ca9ccd48f4 100755
--- a/kubernetes/onap/values.yaml
+++ b/kubernetes/onap/values.yaml
@@ -196,28 +196,25 @@ global:
cmpv2Enabled: true
CMPv2CertManagerIntegration: false
platform:
+ certificates:
+ clientSecretName: oom-cert-service-client-tls-secret
+ keystoreKeyRef: keystore.jks
+ truststoreKeyRef: truststore.jks
+ keystorePasswordSecretName: oom-cert-service-certificates-password
+ keystorePasswordSecretKey: password
+ truststorePasswordSecretName: oom-cert-service-certificates-password
+ truststorePasswordSecretKey: password
certServiceClient:
image: onap/org.onap.oom.platform.cert-service.oom-certservice-client:2.3.3
- secret:
- name: oom-cert-service-client-tls-secret
- mountPath: /etc/onap/oom/certservice/certs/
+ certificatesSecretMountPath: /etc/onap/oom/certservice/certs/
envVariables:
certPath: "/var/custom-certs"
# Certificate related
- cmpv2Organization: "Linux-Foundation"
- cmpv2OrganizationalUnit: "ONAP"
- cmpv2Location: "San-Francisco"
- cmpv2State: "California"
- cmpv2Country: "US"
- # Client configuration related
caName: "RA"
+ # Client configuration related
requestURL: "https://oom-cert-service:8443/v1/certificate/"
requestTimeout: "30000"
- keystorePath: "/etc/onap/oom/certservice/certs/certServiceClient-keystore.jks"
outputType: "P12"
- keystorePassword: "secret"
- truststorePath: "/etc/onap/oom/certservice/certs/truststore.jks"
- truststorePassword: "secret"
# Indicates offline deployment build
# Set to true if you are rendering helm charts for offline deployment
diff --git a/kubernetes/oof/components/oof-cmso/components/oof-cmso-optimizer/values.yaml b/kubernetes/oof/components/oof-cmso/components/oof-cmso-optimizer/values.yaml
index b16dc9f67b..c9de6546c2 100644
--- a/kubernetes/oof/components/oof-cmso/components/oof-cmso-optimizer/values.yaml
+++ b/kubernetes/oof/components/oof-cmso/components/oof-cmso-optimizer/values.yaml
@@ -24,12 +24,12 @@ subChartsOnly:
enabled: true
# application image
-image: onap/optf-cmso-optimizer:2.3.3
+image: onap/optf-cmso-optimizer:2.3.4
pullPolicy: Always
#init container image
dbinit:
- image: onap/optf-cmso-dbinit:2.3.3
+ image: onap/optf-cmso-dbinit:2.3.4
# flag to enable debugging - application support required
debugEnabled: false
diff --git a/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/templates/deployment.yaml b/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/templates/deployment.yaml
index 4a02a64a56..3fd0112928 100644
--- a/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/templates/deployment.yaml
+++ b/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/templates/deployment.yaml
@@ -108,16 +108,6 @@ spec:
name: {{ include "common.fullname" . }}-filebeat
resources:
{{ include "common.resources" . }}
- - name: mso-simulator
- image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.robotimage }}
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- volumeMounts:
- - name: {{ include "common.fullname" . }}-config
- mountPath: /share/etc/config
- ports:
- - containerPort: 5000
- resources:
-{{ include "common.resources" . }}
- name: {{ include "common.name" . }}
image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
diff --git a/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/values.yaml b/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/values.yaml
index 1cb63036d9..105163e95c 100644
--- a/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/values.yaml
+++ b/kubernetes/oof/components/oof-cmso/components/oof-cmso-service/values.yaml
@@ -23,13 +23,12 @@ subChartsOnly:
enabled: true
# application image
-image: onap/optf-cmso-service:2.3.3
-robotimage: onap/optf-cmso-robot:2.3.3
+image: onap/optf-cmso-service:2.3.4
pullPolicy: Always
#init container image
dbinit:
- image: onap/optf-cmso-dbinit:2.3.3
+ image: onap/optf-cmso-dbinit:2.3.4
# flag to enable debugging - application support required
debugEnabled: false
diff --git a/kubernetes/oof/components/oof-cmso/components/oof-cmso-ticketmgt/values.yaml b/kubernetes/oof/components/oof-cmso/components/oof-cmso-ticketmgt/values.yaml
index 6e312aa0cb..7ef7ace48b 100644
--- a/kubernetes/oof/components/oof-cmso/components/oof-cmso-ticketmgt/values.yaml
+++ b/kubernetes/oof/components/oof-cmso/components/oof-cmso-ticketmgt/values.yaml
@@ -23,7 +23,7 @@ subChartsOnly:
enabled: true
# application image
-image: onap/optf-cmso-ticketmgt:2.3.3
+image: onap/optf-cmso-ticketmgt:2.3.4
pullPolicy: Always
diff --git a/kubernetes/oof/components/oof-cmso/components/oof-cmso-topology/values.yaml b/kubernetes/oof/components/oof-cmso/components/oof-cmso-topology/values.yaml
index 217db26612..40eed4e568 100644
--- a/kubernetes/oof/components/oof-cmso/components/oof-cmso-topology/values.yaml
+++ b/kubernetes/oof/components/oof-cmso/components/oof-cmso-topology/values.yaml
@@ -22,7 +22,7 @@ subChartsOnly:
enabled: true
# application image
-image: onap/optf-cmso-topology:2.3.3
+image: onap/optf-cmso-topology:2.3.4
pullPolicy: Always
diff --git a/kubernetes/platform/components/cmpv2-cert-provider/values.yaml b/kubernetes/platform/components/cmpv2-cert-provider/values.yaml
index 0614819930..c34ebad982 100644
--- a/kubernetes/platform/components/cmpv2-cert-provider/values.yaml
+++ b/kubernetes/platform/components/cmpv2-cert-provider/values.yaml
@@ -73,10 +73,10 @@ cmpv2issuer:
certEndpoint: v1/certificate
caName: RA
certSecretRef:
- name: cmpv2-issuer-secret
- certRef: certServiceServer-cert.pem
- keyRef: certServiceServer-key.pem
- cacertRef: truststore.pem
+ name: oom-cert-service-server-tls-secret
+ certRef: tls.crt
+ keyRef: tls.key
+ cacertRef: ca.crt
diff --git a/kubernetes/platform/components/oom-cert-service/Makefile b/kubernetes/platform/components/oom-cert-service/Makefile
deleted file mode 100644
index ea0cb8aae4..0000000000
--- a/kubernetes/platform/components/oom-cert-service/Makefile
+++ /dev/null
@@ -1,183 +0,0 @@
-CERTS_DIR = resources
-CURRENT_DIR := ${CURDIR}
-DOCKER_CONTAINER = generate-certs
-DOCKER_EXEC = docker exec ${DOCKER_CONTAINER}
-
-all: start_docker \
- clear_all \
- root_generate_keys \
- root_create_certificate \
- root_self_sign_certificate \
- client_generate_keys \
- client_generate_csr \
- client_sign_certificate_by_root \
- client_import_root_certificate \
- client_convert_certificate_to_jks \
- server_generate_keys \
- server_generate_csr \
- server_sign_certificate_by_root \
- server_import_root_certificate \
- server_convert_certificate_to_jks \
- server_convert_certificate_to_p12 \
- convert_truststore_to_p12 \
- convert_truststore_to_pem \
- server_export_certificate_to_pem \
- server_export_key_to_pem \
- clear_unused_files \
- stop_docker
-
-.PHONY: all
-
-# Starts docker container for generating certificates - deletes first, if already running
-start_docker:
- @make stop_docker
- $(eval REPOSITORY := $(shell cat ./values.yaml | grep -i "^[ \t]*repository" -m1 | xargs | cut -d ' ' -f2))
- $(eval JAVA_IMAGE := $(shell cat ./values.yaml | grep -i "^[ \t]*certificateGenerationImage" -m1 | xargs | cut -d ' ' -f2))
- $(eval FULL_JAVA_IMAGE := $(REPOSITORY)/$(JAVA_IMAGE))
- $(eval USERNAME :=$(shell id -u))
- $(eval GROUP :=$(shell id -g))
- docker run --rm --name ${DOCKER_CONTAINER} --user "$(USERNAME):$(GROUP)" --mount type=bind,source=${CURRENT_DIR}/${CERTS_DIR},target=/certs -w /certs --entrypoint "sh" -td $(FULL_JAVA_IMAGE)
-
-# Stops docker container for generating certificates. 'true' is used to return 0 status code, if container is already deleted
-stop_docker:
- docker rm ${DOCKER_CONTAINER} -f 1>/dev/null || true
-
-#Clear all files related to certificates
-clear_all:
- @make clear_existing_certificates
- @make clear_unused_files
-
-#Clear certificates
-clear_existing_certificates:
- @echo "Clear certificates"
- ${DOCKER_EXEC} rm -f certServiceClient-keystore.jks certServiceServer-keystore.jks root.crt truststore.jks certServiceServer-keystore.p12 truststore.pem certServiceServer-cert.pem certServiceServer-key.pem
- @echo "#####done#####"
-
-#Generate root private and public keys
-root_generate_keys:
- @echo "Generate root private and public keys"
- ${DOCKER_EXEC} keytool -genkeypair -v -alias root -keyalg RSA -keysize 4096 -validity 3650 -keystore root-keystore.jks \
- -dname "CN=root.com, OU=Root Org, O=Root Company, L=Wroclaw, ST=Dolny Slask, C=PL" -keypass secret \
- -storepass secret -ext BasicConstraints:critical="ca:true"
- @echo "#####done#####"
-
-#Export public key as certificate
-root_create_certificate:
- @echo "(Export public key as certificate)"
- ${DOCKER_EXEC} keytool -exportcert -alias root -keystore root-keystore.jks -storepass secret -file root.crt -rfc
- @echo "#####done#####"
-
-#Self-signed root (import root certificate into truststore)
-root_self_sign_certificate:
- @echo "(Self-signed root (import root certificate into truststore))"
- ${DOCKER_EXEC} keytool -importcert -alias root -keystore truststore.jks -file root.crt -storepass secret -noprompt
- @echo "#####done#####"
-
-#Generate certService's client private and public keys
-client_generate_keys:
- @echo "Generate certService's client private and public keys"
- ${DOCKER_EXEC} keytool -genkeypair -v -alias certServiceClient -keyalg RSA -keysize 2048 -validity 365 \
- -keystore certServiceClient-keystore.jks -storetype JKS \
- -dname "CN=certServiceClient.com,OU=certServiceClient company,O=certServiceClient org,L=Wroclaw,ST=Dolny Slask,C=PL" \
- -keypass secret -storepass secret
- @echo "####done####"
-
-#Generate certificate signing request for certService's client
-client_generate_csr:
- @echo "Generate certificate signing request for certService's client"
- ${DOCKER_EXEC} keytool -certreq -keystore certServiceClient-keystore.jks -alias certServiceClient -storepass secret -file certServiceClient.csr
- @echo "####done####"
-
-#Sign certService's client certificate by root CA
-client_sign_certificate_by_root:
- @echo "Sign certService's client certificate by root CA"
- ${DOCKER_EXEC} keytool -gencert -v -keystore root-keystore.jks -storepass secret -alias root -infile certServiceClient.csr \
- -outfile certServiceClientByRoot.crt -rfc -ext bc=0 -ext ExtendedkeyUsage="serverAuth,clientAuth"
- @echo "####done####"
-
-#Import root certificate into client
-client_import_root_certificate:
- @echo "Import root certificate into intermediate"
- ${DOCKER_EXEC} sh -c "cat root.crt >> certServiceClientByRoot.crt"
- @echo "####done####"
-
-#Import signed certificate into certService's client
-client_convert_certificate_to_jks:
- @echo "Import signed certificate into certService's client"
- ${DOCKER_EXEC} keytool -importcert -file certServiceClientByRoot.crt -destkeystore certServiceClient-keystore.jks -alias certServiceClient -storepass secret -noprompt
- @echo "####done####"
-
-#Generate certService private and public keys
-server_generate_keys:
- @echo "Generate certService private and public keys"
- ${DOCKER_EXEC} keytool -genkeypair -v -alias oom-cert-service -keyalg RSA -keysize 2048 -validity 365 \
- -keystore certServiceServer-keystore.jks -storetype JKS \
- -dname "CN=oom-cert-service,OU=certServiceServer company,O=certServiceServer org,L=Wroclaw,ST=Dolny Slask,C=PL" \
- -keypass secret -storepass secret -ext BasicConstraints:critical="ca:false"
- @echo "####done####"
-
-#Generate certificate signing request for certService
-server_generate_csr:
- @echo "Generate certificate signing request for certService"
- ${DOCKER_EXEC} keytool -certreq -keystore certServiceServer-keystore.jks -alias oom-cert-service -storepass secret -file certServiceServer.csr
- @echo "####done####"
-
-#Sign certService certificate by root CA
-server_sign_certificate_by_root:
- @echo "Sign certService certificate by root CA"
- ${DOCKER_EXEC} keytool -gencert -v -keystore root-keystore.jks -storepass secret -alias root -infile certServiceServer.csr \
- -outfile certServiceServerByRoot.crt -rfc -ext bc=0 -ext ExtendedkeyUsage="serverAuth,clientAuth" \
- -ext SubjectAlternativeName:="DNS:oom-cert-service,DNS:localhost"
- @echo "####done####"
-
-#Import root certificate into server
-server_import_root_certificate:
- @echo "Import root certificate into intermediate(server)"
- ${DOCKER_EXEC} sh -c "cat root.crt >> certServiceServerByRoot.crt"
- @echo "####done####"
-
-#Import signed certificate into certService
-server_convert_certificate_to_jks:
- @echo "Import signed certificate into certService"
- ${DOCKER_EXEC} keytool -importcert -file certServiceServerByRoot.crt -destkeystore certServiceServer-keystore.jks -alias oom-cert-service \
- -storepass secret -noprompt
- @echo "####done####"
-
-#Convert certServiceServer-keystore(.jks) to PCKS12 format(.p12)
-server_convert_certificate_to_p12:
- @echo "Convert certServiceServer-keystore(.jks) to PCKS12 format(.p12)"
- ${DOCKER_EXEC} keytool -importkeystore -srckeystore certServiceServer-keystore.jks -srcstorepass secret \
- -destkeystore certServiceServer-keystore.p12 -deststoretype PKCS12 -deststorepass secret
- @echo "#####done#####"
-
-#Convert truststore(.jks) to PCKS12 format(.p12)
-convert_truststore_to_p12:
- @echo "Convert certServiceServer-keystore(.jks) to PCKS12 format(.p12)"
- ${DOCKER_EXEC} keytool -importkeystore -srckeystore truststore.jks -srcstorepass secret \
- -destkeystore truststore.p12 -deststoretype PKCS12 -deststorepass secret
- @echo "#####done#####"
-
-#Convert truststore(.p12) to PEM format(.pem)
-convert_truststore_to_pem:
- @echo "Convert certServiceServer-keystore(.p12) to PEM format(.pem)"
- ${DOCKER_EXEC} openssl pkcs12 -nodes -in truststore.p12 -out truststore.pem -passin pass:secret
- @echo "#####done#####"
-
-#Export certificates from certServiceServer-keystore(.p12) to PEM format(.pem)
-server_export_certificate_to_pem:
- @echo "Export certificates from certServiceClient-keystore(.p12) to PEM format(.pem)"
- ${DOCKER_EXEC} openssl pkcs12 -in certServiceServer-keystore.p12 -passin 'pass:secret' -nodes -nokeys -out certServiceServer-cert.pem
- @echo "#####done#####"
-
-#Export keys from certServiceServer-keystore(.p12) to PEM format(.pem)
-server_export_key_to_pem:
- @echo "Export keys from certServiceClient-keystore(.p12) to PEM format(.pem)"
- ${DOCKER_EXEC} openssl pkcs12 -in certServiceServer-keystore.p12 -passin 'pass:secret' -nodes -nocerts -out certServiceServer-key.pem
- @echo "#####done#####"
-
-
-#Clear unused certificates
-clear_unused_files:
- @echo "Clear unused certificates"
- ${DOCKER_EXEC} rm -f certServiceClientByRoot.crt certServiceClient.csr root-keystore.jks certServiceServerByRoot.crt certServiceServer.csr truststore.p12
- @echo "#####done#####"
diff --git a/kubernetes/platform/components/oom-cert-service/requirements.yaml b/kubernetes/platform/components/oom-cert-service/requirements.yaml
index e89dc58027..6177278552 100644
--- a/kubernetes/platform/components/oom-cert-service/requirements.yaml
+++ b/kubernetes/platform/components/oom-cert-service/requirements.yaml
@@ -19,3 +19,9 @@ dependencies:
- name: repositoryGenerator
version: ~8.x-0
repository: '@local'
+ - name: certManagerCertificate
+ version: ~8.x-0
+ repository: '@local'
+ - name: cmpv2Config
+ version: ~8.x-0
+ repository: '@local' \ No newline at end of file
diff --git a/kubernetes/platform/components/oom-cert-service/templates/certificate.yaml b/kubernetes/platform/components/oom-cert-service/templates/certificate.yaml
new file mode 100644
index 0000000000..fd317703e3
--- /dev/null
+++ b/kubernetes/platform/components/oom-cert-service/templates/certificate.yaml
@@ -0,0 +1,17 @@
+{{/*
+# Copyright © 2020-2021 Nokia
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{ include "certManagerCertificate.certificate" . }}
diff --git a/kubernetes/platform/components/oom-cert-service/templates/deployment.yaml b/kubernetes/platform/components/oom-cert-service/templates/deployment.yaml
index c4d7440b20..9a6abd4eb9 100644
--- a/kubernetes/platform/components/oom-cert-service/templates/deployment.yaml
+++ b/kubernetes/platform/components/oom-cert-service/templates/deployment.yaml
@@ -93,9 +93,9 @@ spec:
- name: ROOT_CERT
value: "{{ .Values.tls.server.volume.mountPath }}/{{ .Values.envs.truststore.crtName }}"
- name: KEYSTORE_PASSWORD
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "keystore-password" "key" "password") | indent 14 }}
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "certificates-password" "key" "password") | indent 14 }}
- name: TRUSTSTORE_PASSWORD
- {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "truststore-password" "key" "password") | indent 14 }}
+ {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "certificates-password" "key" "password") | indent 14 }}
livenessProbe:
exec:
command:
diff --git a/kubernetes/platform/components/oom-cert-service/templates/issuer.yaml b/kubernetes/platform/components/oom-cert-service/templates/issuer.yaml
new file mode 100644
index 0000000000..9047ab73d3
--- /dev/null
+++ b/kubernetes/platform/components/oom-cert-service/templates/issuer.yaml
@@ -0,0 +1,32 @@
+{{/*
+ # Copyright © 2021, Nokia
+ #
+ # Licensed under the Apache License, Version 2.0 (the "License");
+ # you may not use this file except in compliance with the License.
+ # You may obtain a copy of the License at
+ #
+ # http://www.apache.org/licenses/LICENSE-2.0
+ #
+ # Unless required by applicable law or agreed to in writing, software
+ # distributed under the License is distributed on an "AS IS" BASIS,
+ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ # See the License for the specific language governing permissions and
+ # limitations under the License.
+*/}}
+
+apiVersion: cert-manager.io/v1
+kind: Issuer
+metadata:
+ name: {{ .Values.tls.issuer.selfsigning.name }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ selfSigned: {}
+---
+apiVersion: cert-manager.io/v1
+kind: Issuer
+metadata:
+ name: {{ .Values.tls.issuer.ca.name }}
+ namespace: {{ include "common.namespace" . }}
+spec:
+ ca:
+ secretName: {{ .Values.tls.issuer.ca.secret.name }} \ No newline at end of file
diff --git a/kubernetes/platform/components/oom-cert-service/templates/secret.yaml b/kubernetes/platform/components/oom-cert-service/templates/secret.yaml
index 2d47e6f57c..5401801af5 100644
--- a/kubernetes/platform/components/oom-cert-service/templates/secret.yaml
+++ b/kubernetes/platform/components/oom-cert-service/templates/secret.yaml
@@ -28,42 +28,5 @@ data:
{{ (.Files.Glob "resources/default/cmpServers.json").AsSecrets }}
{{ end }}
---
-apiVersion: v1
-kind: Secret
-metadata:
- name: {{ .Values.global.certService.certServiceClient.secret.name | default .Values.tls.client.secret.defaultName }}
-type: Opaque
-data:
- certServiceClient-keystore.jks:
- {{ (.Files.Glob "resources/certServiceClient-keystore.jks").AsSecrets }}
- truststore.jks:
- {{ (.Files.Glob "resources/truststore.jks").AsSecrets }}
----
-apiVersion: v1
-kind: Secret
-metadata:
- name: {{ .Values.tls.server.secret.name }}
-type: Opaque
-data:
- certServiceServer-keystore.jks:
- {{ (.Files.Glob "resources/certServiceServer-keystore.jks").AsSecrets }}
- certServiceServer-keystore.p12:
- {{ (.Files.Glob "resources/certServiceServer-keystore.p12").AsSecrets }}
- truststore.jks:
- {{ (.Files.Glob "resources/truststore.jks").AsSecrets }}
- root.crt:
- {{ (.Files.Glob "resources/root.crt").AsSecrets }}
----
-apiVersion: v1
-kind: Secret
-metadata:
- name: {{ .Values.tls.provider.secret.name }}
-type: Opaque
-data:
- certServiceServer-key.pem:
- {{ (.Files.Glob "resources/certServiceServer-key.pem").AsSecrets }}
- certServiceServer-cert.pem:
- {{ (.Files.Glob "resources/certServiceServer-cert.pem").AsSecrets }}
- truststore.pem:
- {{ (.Files.Glob "resources/truststore.pem").AsSecrets }}
+
{{ end -}}
diff --git a/kubernetes/platform/components/oom-cert-service/values.yaml b/kubernetes/platform/components/oom-cert-service/values.yaml
index 537b025fb0..829d3a01d1 100644
--- a/kubernetes/platform/components/oom-cert-service/values.yaml
+++ b/kubernetes/platform/components/oom-cert-service/values.yaml
@@ -79,38 +79,40 @@ cmpServers:
mountPath: /etc/onap/oom/certservice
tls:
+ issuer:
+ selfsigning:
+ name: &selfSigningIssuer cmpv2-selfsigning-issuer
+ ca:
+ name: &caIssuer cmpv2-ca-issuer
+ secret:
+ name: &caKeyPairSecret cmpv2-ca-key-pair
server:
secret:
- name: oom-cert-service-server-tls-secret
+ name: &serverSecret oom-cert-service-server-tls-secret
volume:
name: oom-cert-service-server-tls-volume
mountPath: /etc/onap/oom/certservice/certs/
client:
secret:
defaultName: oom-cert-service-client-tls-secret
- provider:
- secret:
- name: cmpv2-issuer-secret
envs:
keystore:
- jksName: certServiceServer-keystore.jks
- p12Name: certServiceServer-keystore.p12
- pemName: certServiceServer-keystore.pem
+ jksName: keystore.jks
+ p12Name: keystore.p12
+ pemName: tls.crt
truststore:
jksName: truststore.jks
- crtName: root.crt
- pemName: truststore.pem
+ crtName: ca.crt
+ pemName: tls.crt
httpsPort: 8443
# External secrets with credentials can be provided to override default credentials defined below,
# by uncommenting and filling appropriate *ExternalSecret value
credentials:
tls:
- keystorePassword: secret
- truststorePassword: secret
- #keystorePasswordExternalSecret:
- #truststorePasswordExternalSecret:
+ certificatesPassword: secret
+ #certificatesPasswordExternalSecret:
# Below cmp values contain credentials for EJBCA test instance and are relevant only if global addTestingComponents flag is enabled
cmp:
# Used only if cmpv2 testing is enabled
@@ -126,17 +128,11 @@ credentials:
# rv: unused
secrets:
- - uid: keystore-password
- name: '{{ include "common.release" . }}-keystore-password'
- type: password
- externalSecret: '{{ tpl (default "" .Values.credentials.tls.keystorePasswordExternalSecret) . }}'
- password: '{{ .Values.credentials.tls.keystorePassword }}'
- passwordPolicy: required
- - uid: truststore-password
- name: '{{ include "common.release" . }}-truststore-password'
+ - uid: certificates-password
+ name: &certificatesPasswordSecretName '{{ .Values.cmpv2Config.global.platform.certificates.keystorePasswordSecretName }}'
type: password
- externalSecret: '{{ tpl (default "" .Values.credentials.tls.truststorePasswordExternalSecret) . }}'
- password: '{{ .Values.credentials.tls.truststorePassword }}'
+ externalSecret: '{{ tpl (default "" .Values.credentials.tls.certificatesPasswordExternalSecret) . }}'
+ password: '{{ .Values.credentials.tls.certificatesPassword }}'
passwordPolicy: required
# Below values are relevant only if global addTestingComponents flag is enabled
- uid: ejbca-server-client-iak
@@ -155,3 +151,65 @@ secrets:
type: password
externalSecret: '{{ tpl (default "" .Values.credentials.cmp.raRvExternalSecret) . }}'
password: '{{ .Values.credentials.cmp.ra.rv }}'
+
+# Certificates definitions
+certificates:
+ - name: selfsigned-cert
+ secretName: *caKeyPairSecret
+ isCA: true
+ commonName: root.com
+ subject:
+ organization: Root Company
+ country: PL
+ locality: Wroclaw
+ province: Dolny Slask
+ organizationalUnit: Root Org
+ issuer:
+ name: *selfSigningIssuer
+ kind: Issuer
+ - name: cert-service-server-cert
+ secretName: *serverSecret
+ commonName: oom-cert-service
+ dnsNames:
+ - oom-cert-service
+ - localhost
+ subject:
+ organization: certServiceServer org
+ country: PL
+ locality: Wroclaw
+ province: Dolny Slask
+ organizationalUnit: certServiceServer company
+ usages:
+ - server auth
+ - client auth
+ keystore:
+ outputType:
+ - jks
+ - p12
+ passwordSecretRef:
+ name: *certificatesPasswordSecretName
+ key: password
+ issuer:
+ name: *caIssuer
+ kind: Issuer
+ - name: cert-service-client-cert
+ secretName: '{{ .Values.cmpv2Config.global.platform.certificates.clientSecretName | default .Values.tls.client.secret.defaultName }}'
+ commonName: certServiceClient.com
+ subject:
+ organization: certServiceClient org
+ country: PL
+ locality: Wroclaw
+ province: Dolny Slask
+ organizationalUnit: certServiceClient company
+ usages:
+ - server auth
+ - client auth
+ keystore:
+ outputType:
+ - jks
+ passwordSecretRef:
+ name: *certificatesPasswordSecretName
+ key: password
+ issuer:
+ name: *caIssuer
+ kind: Issuer
diff --git a/kubernetes/policy/components/policy-apex-pdp/values.yaml b/kubernetes/policy/components/policy-apex-pdp/values.yaml
index 22edcff601..aa1daf703f 100755
--- a/kubernetes/policy/components/policy-apex-pdp/values.yaml
+++ b/kubernetes/policy/components/policy-apex-pdp/values.yaml
@@ -80,9 +80,6 @@ certInitializer:
uid: 101
gid: 102
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass
- {{ .Values.fqi }} {{ .Values.fqdn }} | grep "^cadi_keystore_password_p12");
echo "export KEYSTORE='{{ .Values.credsPath }}/org.onap.policy.p12'" >> {{ .Values.credsPath }}/.ci;
echo "export KEYSTORE_PASSWORD='${cadi_keystore_password_p12}'" >> {{ .Values.credsPath }}/.ci;
chown -R {{ .Values.uid }}:{{ .Values.gid }} $(dirname {{ .Values.credsPath }});
diff --git a/kubernetes/policy/components/policy-api/values.yaml b/kubernetes/policy/components/policy-api/values.yaml
index 0b2ea9f20c..da983e5b5b 100755
--- a/kubernetes/policy/components/policy-api/values.yaml
+++ b/kubernetes/policy/components/policy-api/values.yaml
@@ -69,9 +69,6 @@ certInitializer:
uid: 100
gid: 101
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass
- {{ .Values.fqi }} {{ .Values.fqdn }} | grep "^cadi_keystore_password_p12");
echo "export KEYSTORE='{{ .Values.credsPath }}/org.onap.policy.p12'" > {{ .Values.credsPath }}/.ci;
echo "export KEYSTORE_PASSWD='${cadi_keystore_password_p12}'" >> {{ .Values.credsPath }}/.ci;
chown -R {{ .Values.uid }}:{{ .Values.gid }} $(dirname {{ .Values.credsPath }});
@@ -146,4 +143,3 @@ resources:
cpu: 200m
memory: 2Gi
unlimited: {}
-
diff --git a/kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh b/kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh
index 329479fad2..ad9984c26c 100755
--- a/kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh
+++ b/kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh
@@ -16,4 +16,4 @@
# limitations under the License.
*/}}
-mysql -h"${MYSQL_HOST}" -P"${MYSQL_PORT}" -u"${MYSQL_USER}" -p"${MYSQL_PASSWORD}" policyclamp < /dbcmd-config/policy-clamp-create-tables.sql
+mysql -h"${MYSQL_HOST}" -P"${MYSQL_PORT}" -u"${MYSQL_USER}" -p"${MYSQL_PASSWORD}" -f policyclamp < /dbcmd-config/policy-clamp-create-tables.sql
diff --git a/kubernetes/policy/components/policy-clamp-be/values.yaml b/kubernetes/policy/components/policy-clamp-be/values.yaml
index 50ec8fafea..ef0ea7ae4e 100644
--- a/kubernetes/policy/components/policy-clamp-be/values.yaml
+++ b/kubernetes/policy/components/policy-clamp-be/values.yaml
@@ -44,11 +44,10 @@ certInitializer:
app_ns: org.osaaf.aaf
credsPath: /opt/app/osaaf/local
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop;
- grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_truststore_password=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_truststore_password.pwd;
- grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_key_password=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_key_password.pwd;
- grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_keystore_password=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_keystore_password.pwd;
- grep '^cadi' {{ .Values.credsPath }}/mycreds.prop | awk -v FS="cadi_keystore_password_p12=" 'NF>1{print $2}' > {{ .Values.credsPath }}/cadi_keystore_password_p12.pwd;
+ echo "$cadi_truststore_password" > {{ .Values.credsPath }}/cadi_truststore_password.pwd;
+ echo "$cadi_key_password" > {{ .Values.credsPath }}/cadi_key_password.pwd;
+ echo "$cadi_keystore_password" > {{ .Values.credsPath }}/cadi_keystore_password.pwd;
+ echo "$cadi_keystore_password_p12" > {{ .Values.credsPath }}/cadi_keystore_password_p12.pwd;
cd {{ .Values.credsPath }};
chmod a+rx *;
diff --git a/kubernetes/policy/components/policy-clamp-fe/values.yaml b/kubernetes/policy/components/policy-clamp-fe/values.yaml
index c2f4d157c8..c824965955 100644
--- a/kubernetes/policy/components/policy-clamp-fe/values.yaml
+++ b/kubernetes/policy/components/policy-clamp-fe/values.yaml
@@ -48,8 +48,6 @@ certInitializer:
app_ns: org.osaaf.aaf
credsPath: /opt/app/osaaf/local
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0);
cd {{ .Values.credsPath }};
openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }};
openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }};
diff --git a/kubernetes/policy/components/policy-distribution/values.yaml b/kubernetes/policy/components/policy-distribution/values.yaml
index 09805bd496..6788613ceb 100755
--- a/kubernetes/policy/components/policy-distribution/values.yaml
+++ b/kubernetes/policy/components/policy-distribution/values.yaml
@@ -105,9 +105,6 @@ certInitializer:
uid: 100
gid: 101
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass
- {{ .Values.fqi }} {{ .Values.fqdn }} | grep "^cadi_keystore_password_p12");
echo "export KEYSTORE='{{ .Values.credsPath }}/org.onap.policy.p12'" >> {{ .Values.credsPath }}/.ci;
echo "export KEYSTORE_PASSWD='${cadi_keystore_password_p12}'" >> {{ .Values.credsPath }}/.ci;
chown -R {{ .Values.uid }}:{{ .Values.gid }} $(dirname {{ .Values.credsPath }});
diff --git a/kubernetes/policy/components/policy-drools-pdp/values.yaml b/kubernetes/policy/components/policy-drools-pdp/values.yaml
index 658fa65a31..4eb37c6106 100755
--- a/kubernetes/policy/components/policy-drools-pdp/values.yaml
+++ b/kubernetes/policy/components/policy-drools-pdp/values.yaml
@@ -89,9 +89,6 @@ certInitializer:
uid: 100
gid: 101
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass
- {{ .Values.fqi }} {{ .Values.fqdn }} | grep "^cadi_keystore_password_p12");
echo "export KEYSTORE='{{ .Values.credsPath }}/org.onap.policy.p12'" >> {{ .Values.credsPath }}/.ci;
echo "export KEYSTORE_PASSWD='${cadi_keystore_password_p12}'" >> {{ .Values.credsPath }}/.ci;
echo "export CADI_KEYFILE='{{ .Values.credsPath }}/org.onap.policy.keyfile'" >> {{ .Values.credsPath }}/.ci;
diff --git a/kubernetes/policy/components/policy-pap/values.yaml b/kubernetes/policy/components/policy-pap/values.yaml
index ec177d82c1..18e0e3e171 100755
--- a/kubernetes/policy/components/policy-pap/values.yaml
+++ b/kubernetes/policy/components/policy-pap/values.yaml
@@ -83,9 +83,6 @@ certInitializer:
uid: 100
gid: 101
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass
- {{ .Values.fqi }} {{ .Values.fqdn }} | grep "^cadi_keystore_password_p12");
echo "export KEYSTORE='{{ .Values.credsPath }}/org.onap.policy.p12'" > {{ .Values.credsPath }}/.ci;
echo "export KEYSTORE_PASSWD='${cadi_keystore_password_p12}'" >> {{ .Values.credsPath }}/.ci;
chown -R {{ .Values.uid }}:{{ .Values.gid }} $(dirname {{ .Values.credsPath }});
@@ -172,4 +169,3 @@ resources:
cpu: 200m
memory: 2Gi
unlimited: {}
-
diff --git a/kubernetes/policy/components/policy-xacml-pdp/values.yaml b/kubernetes/policy/components/policy-xacml-pdp/values.yaml
index 76b0f3a42a..64c00e9bed 100755
--- a/kubernetes/policy/components/policy-xacml-pdp/values.yaml
+++ b/kubernetes/policy/components/policy-xacml-pdp/values.yaml
@@ -74,9 +74,6 @@ certInitializer:
uid: 100
gid: 101
aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- export $(/opt/app/aaf_config/bin/agent.sh local showpass
- {{ .Values.fqi }} {{ .Values.fqdn }} | grep "^cadi_keystore_password_p12");
echo "export KEYSTORE='{{ .Values.credsPath }}/org.onap.policy.p12'" > {{ .Values.credsPath }}/.ci;
echo "export KEYSTORE_PASSWD='${cadi_keystore_password_p12}'" >> {{ .Values.credsPath }}/.ci;
chown -R {{ .Values.uid }}:{{ .Values.gid }} $(dirname {{ .Values.credsPath }});
@@ -155,4 +152,3 @@ resources:
cpu: 200m
memory: 2Gi
unlimited: {}
-
diff --git a/kubernetes/portal/components/portal-app/values.yaml b/kubernetes/portal/components/portal-app/values.yaml
index 0a818102c6..b46876ced9 100644
--- a/kubernetes/portal/components/portal-app/values.yaml
+++ b/kubernetes/portal/components/portal-app/values.yaml
@@ -77,10 +77,9 @@ certInitializer:
permission_group: 999
keystoreFile: "org.onap.portal.p12"
truststoreFile: "org.onap.portal.trust.jks"
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- /opt/app/aaf_config/bin/agent.sh local showpass \
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_truststore_password=$cadi_truststore_password" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" >> {{ .Values.credsPath }}/mycreds.prop
# default number of instances
replicaCount: 1
diff --git a/kubernetes/portal/components/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh b/kubernetes/portal/components/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh
index 390241fa1d..c4a21b927f 100644
--- a/kubernetes/portal/components/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh
+++ b/kubernetes/portal/components/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh
@@ -107,7 +107,7 @@ docker_temp_server_start() {
if [ -z "$DATABASE_ALREADY_EXISTS" ]; then
extraArgs+=( '--dont-use-mysql-root-password' )
fi
- if docker_process_sql "${extraArgs[@]}" --database=mysql <<<'SELECT 1' &> /dev/null; then
+ if echo 'SELECT 1' |docker_process_sql "${extraArgs[@]}" --database=mysql >/dev/null 2>&1; then
break
fi
sleep 1
@@ -263,19 +263,19 @@ docker_setup_db() {
# Creates a custom database and user if specified
if [ -n "$MYSQL_DATABASE" ]; then
mysql_note "Creating database ${MYSQL_DATABASE}"
- docker_process_sql --database=mysql <<<"CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;"
+ echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" |docker_process_sql --database=mysql
fi
if [ -n "$MYSQL_USER" ] && [ -n "$MYSQL_PASSWORD" ]; then
mysql_note "Creating user ${MYSQL_USER}"
- docker_process_sql --database=mysql <<<"CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;"
+ echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" |docker_process_sql --database=mysql
if [ -n "$MYSQL_DATABASE" ]; then
mysql_note "Giving user ${MYSQL_USER} access to schema ${MYSQL_DATABASE}"
- docker_process_sql --database=mysql <<<"GRANT ALL ON \`${MYSQL_DATABASE//_/\\_}\`.* TO '$MYSQL_USER'@'%' ;"
+ echo "GRANT ALL ON \`${MYSQL_DATABASE//_/\\_}\`.* TO '$MYSQL_USER'@'%' ;" |docker_process_sql --database=mysql
fi
- docker_process_sql --database=mysql <<<"FLUSH PRIVILEGES ;"
+ echo "FLUSH PRIVILEGES ;" |docker_process_sql --database=mysql
fi
}
diff --git a/kubernetes/portal/components/portal-sdk/values.yaml b/kubernetes/portal/components/portal-sdk/values.yaml
index 11ce5a6e42..7631c3a482 100644
--- a/kubernetes/portal/components/portal-sdk/values.yaml
+++ b/kubernetes/portal/components/portal-sdk/values.yaml
@@ -78,10 +78,9 @@ certInitializer:
permission_group: 999
keystoreFile: "org.onap.portal.p12"
truststoreFile: "org.onap.portal.trust.jks"
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh;
- /opt/app/aaf_config/bin/agent.sh local showpass \
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_truststore_password=$cadi_truststore_password" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" >> {{ .Values.credsPath }}/mycreds.prop
# flag to enable debugging - application support required
debugEnabled: false
diff --git a/kubernetes/robot/demo-k8s.sh b/kubernetes/robot/demo-k8s.sh
index 7ab384e8d0..d48070cf24 100755
--- a/kubernetes/robot/demo-k8s.sh
+++ b/kubernetes/robot/demo-k8s.sh
@@ -63,7 +63,7 @@ usage ()
# Check if execscript flag is used and drop it from input arguments
-if [[ "${!#}" == "execscript" ]]; then
+if [[ "${!#}" = "execscript" ]]; then
set -- "${@:1:$#-1}"
execscript=true
fi
diff --git a/kubernetes/robot/ete-k8s.sh b/kubernetes/robot/ete-k8s.sh
index 576b669cdb..97f4e4d032 100755
--- a/kubernetes/robot/ete-k8s.sh
+++ b/kubernetes/robot/ete-k8s.sh
@@ -18,7 +18,7 @@
# Run the testsuite for the passed tag. Valid tags are listed in usage help
# Please clean up logs when you are done...
#
-if [ "$1" == "" ] || [ "$2" == "" ]; then
+if [ "$1" = "" ] || [ "$2" = "" ]; then
echo "Usage: ete-k8s.sh [namespace] [tag] [execscript]"
echo ""
echo " List of test case tags (filename for intent: tag)"
@@ -76,7 +76,7 @@ SCRIPTDIR=scripts/etescript
ETEHOME=/var/opt/ONAP
-if [[ "${!#}" == "execscript" ]]; then
+if [[ "${!#}" = "execscript" ]]; then
for script in $(ls -1 "$DIR/$SCRIPTDIR"); do
[ -f "$DIR/$SCRIPTDIR/$script" ] && [ -x "$DIR/$SCRIPTDIR/$script" ] && source "$DIR/$SCRIPTDIR/$script"
done
diff --git a/kubernetes/robot/eteHelm-k8s.sh b/kubernetes/robot/eteHelm-k8s.sh
index b8b8708a26..2512e5f7ce 100755
--- a/kubernetes/robot/eteHelm-k8s.sh
+++ b/kubernetes/robot/eteHelm-k8s.sh
@@ -18,7 +18,7 @@
# Run the health-check testsuites for the tags discovered by helm list
# Please clean up logs when you are done...
#
-if [ "$1" == "" ] ; then
+if [ "$1" = "" ] ; then
echo "Usage: eteHelm-k8s.sh [namespace] [execscript]"
echo " list projects via helm list and runs health-check with those tags except dev and dev-consul"
echo " [execscript] - optional parameter to execute user custom scripts located in scripts/helmscript directory"
@@ -44,7 +44,7 @@ SCRIPTDIR=scripts/helmscript
ETEHOME=/var/opt/ONAP
-if [[ "${!#}" == "execscript" ]]; then
+if [[ "${!#}" = "execscript" ]]; then
for script in $(ls -1 "$DIR/$SCRIPTDIR"); do
[ -f "$DIR/$SCRIPTDIR/$script" ] && [ -x "$DIR/$SCRIPTDIR/$script" ] && source "$DIR/$SCRIPTDIR/$script"
done
diff --git a/kubernetes/robot/instantiate-k8s.sh b/kubernetes/robot/instantiate-k8s.sh
index f10ad7e493..f4f6b04e4c 100755
--- a/kubernetes/robot/instantiate-k8s.sh
+++ b/kubernetes/robot/instantiate-k8s.sh
@@ -111,9 +111,9 @@ kubectl --namespace $NAMESPACE cp $FOLDER ${POD}:/tmp/vnfdata.${BUILDNUM}
echo "Executing instantiation..."
if [ $POLL = 1 ]; then
- kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} ${TAGS} --listener ${ETEHOME}/testsuite/eteutils/robotframework-onap/listeners/OVPListener.py --display $DISPLAY_NUM > /tmp/vnf_instantiation.$BUILDNUM.log 2>&1 &"
+ kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} ${TAGS} --listener ${ETEHOME}/testsuite/eteutils/robotframework-onap/listeners/OVPListener.py --display $DISPLAY_NUM > /tmp/vnf_instantiation.$BUILDNUM.log 2>&1 &"
- pid=`kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "pgrep runTags.sh -n"`
+ pid=`kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "pgrep runTags.sh -n"`
if [ -z "$pid" ]; then
echo "robot testsuite unable to start"
@@ -123,10 +123,10 @@ if [ $POLL = 1 ]; then
kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "while ps -p \"$pid\" --no-headers | grep -v defunct; do echo \$'\n\n'; echo \"Testsuite still running \"\`date\`; echo \"LOG FILE: \"; tail -10 /tmp/vnf_instantiation.$BUILDNUM.log; sleep 30; done"
else
- kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} ${TAGS} --listener ${ETEHOME}/testsuite/eteutils/robotframework-onap/listeners/OVPListener.py --display $DISPLAY_NUM"
+ kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} ${TAGS} --listener ${ETEHOME}/testsuite/eteutils/robotframework-onap/listeners/OVPListener.py --display $DISPLAY_NUM"
fi
-set +x
+set +x
echo "testsuite has finished"
diff --git a/kubernetes/robot/values.yaml b/kubernetes/robot/values.yaml
index 6f54c6b340..9e5f222f48 100644
--- a/kubernetes/robot/values.yaml
+++ b/kubernetes/robot/values.yaml
@@ -22,7 +22,7 @@ global: # global defaults
# application image
repository: nexus3.onap.org:10001
-image: onap/testsuite:1.7.3
+image: onap/testsuite:1.8.0
pullPolicy: Always
ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
diff --git a/kubernetes/sdc/components/sdc-be/values.yaml b/kubernetes/sdc/components/sdc-be/values.yaml
index 77577d6ee3..bdaea44938 100644
--- a/kubernetes/sdc/components/sdc-be/values.yaml
+++ b/kubernetes/sdc/components/sdc-be/values.yaml
@@ -35,8 +35,8 @@ global:
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdc-backend-all-plugins:1.8.4
-backendInitImage: onap/sdc-backend-init:1.8.4
+image: onap/sdc-backend-all-plugins:1.8.5
+backendInitImage: onap/sdc-backend-init:1.8.5
pullPolicy: Always
@@ -63,9 +63,9 @@ certInitializer:
truststoreFile: "org.onap.sdc.trust.jks"
permission_user: 352070
permission_group: 35953
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_truststore_password=$cadi_truststore_password" >> {{ .Values.credsPath }}/mycreds.prop
#################################################################
# SDC Config part
diff --git a/kubernetes/sdc/components/sdc-cs/values.yaml b/kubernetes/sdc/components/sdc-cs/values.yaml
index 33e32ddfbe..3422f9d14d 100644
--- a/kubernetes/sdc/components/sdc-cs/values.yaml
+++ b/kubernetes/sdc/components/sdc-cs/values.yaml
@@ -38,8 +38,8 @@ global:
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/sdc-cassandra:1.8.4
-cassandraInitImage: onap/sdc-cassandra-init:1.8.4
+image: onap/sdc-cassandra:1.8.5
+cassandraInitImage: onap/sdc-cassandra-init:1.8.5
pullPolicy: Always
config:
diff --git a/kubernetes/sdc/components/sdc-fe/values.yaml b/kubernetes/sdc/components/sdc-fe/values.yaml
index 079d7ad462..1e269d0552 100644
--- a/kubernetes/sdc/components/sdc-fe/values.yaml
+++ b/kubernetes/sdc/components/sdc-fe/values.yaml
@@ -39,15 +39,15 @@ certInitializer:
truststoreFile: "org.onap.sdc.trust.jks"
permission_user: 352070
permission_group: 35953
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_truststore_password=$cadi_truststore_password" >> {{ .Values.credsPath }}/mycreds.prop
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdc-frontend:1.8.4
+image: onap/sdc-frontend:1.8.5
pullPolicy: Always
config:
diff --git a/kubernetes/sdc/components/sdc-helm-validator/Chart.yaml b/kubernetes/sdc/components/sdc-helm-validator/Chart.yaml
new file mode 100644
index 0000000000..5af3bf737b
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-helm-validator/Chart.yaml
@@ -0,0 +1,20 @@
+# ===========LICENSE_START========================================================
+# Copyright (c) 2021 Nokia. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP Service Design and Creation Helm Validator
+name: sdc-helm-validator
+version: 8.0.0
diff --git a/kubernetes/sdc/components/sdc-helm-validator/requirements.yaml b/kubernetes/sdc/components/sdc-helm-validator/requirements.yaml
new file mode 100644
index 0000000000..8e1160ad44
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-helm-validator/requirements.yaml
@@ -0,0 +1,23 @@
+# ===========LICENSE_START========================================================
+# Copyright (c) 2021 Nokia. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+dependencies:
+ - name: repositoryGenerator
+ version: ~8.x-0
+ repository: '@local'
+ - name: common
+ version: ~8.x-0
+ repository: '@local'
diff --git a/kubernetes/sdc/components/sdc-helm-validator/templates/deployment.yaml b/kubernetes/sdc/components/sdc-helm-validator/templates/deployment.yaml
new file mode 100644
index 0000000000..08228ad99c
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-helm-validator/templates/deployment.yaml
@@ -0,0 +1,44 @@
+{{/*
+# ===========LICENSE_START========================================================
+# Copyright (c) 2021 Nokia. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata: {{- include "common.resourceMetadata" . | nindent 2 }}
+spec:
+ selector: {{- include "common.selectors" . | nindent 4 }}
+ replicas: 1
+ template:
+ metadata: {{- include "common.templateMetadata" . | nindent 6 }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ resources: {{ include "common.resources" . | nindent 12 }}
+ ports: {{ include "common.containerPorts" . | nindent 12 }}
+ env:
+ - name: LOG_LEVEL
+ value: {{ .Values.config.loggingLevel }}
+ livenessProbe:
+ httpGet:
+ path: {{ .Values.liveness.path }}
+ port: {{ .Values.liveness.port }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/components/sdc-helm-validator/templates/service.yaml b/kubernetes/sdc/components/sdc-helm-validator/templates/service.yaml
new file mode 100644
index 0000000000..a5837afc84
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-helm-validator/templates/service.yaml
@@ -0,0 +1,19 @@
+{{/*
+# ===========LICENSE_START========================================================
+# Copyright (c) 2021 Nokia. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+*/}}
+
+{{ include "common.service" . }}
diff --git a/kubernetes/sdc/components/sdc-helm-validator/values.yaml b/kubernetes/sdc/components/sdc-helm-validator/values.yaml
new file mode 100644
index 0000000000..9c0d90649f
--- /dev/null
+++ b/kubernetes/sdc/components/sdc-helm-validator/values.yaml
@@ -0,0 +1,58 @@
+# ===========LICENSE_START========================================================
+# Copyright (c) 2021 Nokia. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+# Global values
+global:
+ pullPolicy: Always
+
+image: onap/org.onap.sdc.sdc-helm-validator:1.2.0
+containerPort: &svc_port 8080
+
+config:
+ loggingLevel: INFO
+
+service:
+ type: ClusterIP
+ ports:
+ - name: &port http
+ port: *svc_port
+
+liveness:
+ initialDelaySeconds: 30
+ periodSeconds: 30
+ path: /actuator/health
+ port: *port
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+flavor: small
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 256Mi
+ requests:
+ cpu: 1
+ memory: 256Mi
+ large:
+ limits:
+ cpu: 2
+ memory: 1Gi
+ requests:
+ cpu: 1
+ memory: 256Mi
+ unlimited: {}
diff --git a/kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml b/kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml
index 5c530fea72..af53fd6708 100644
--- a/kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/templates/deployment.yaml
@@ -93,7 +93,7 @@ spec:
memory: 20Mi
{{- end }}
- name: volume-permissions
- image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.global.busyboxImage | default .Values.busyboxImage }}
+ image: {{ include "repositoryGenerator.image.busybox" . }}
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
command:
- sh
diff --git a/kubernetes/sdc/components/sdc-onboarding-be/values.yaml b/kubernetes/sdc/components/sdc-onboarding-be/values.yaml
index e34d5c5cfb..d2dd808d86 100644
--- a/kubernetes/sdc/components/sdc-onboarding-be/values.yaml
+++ b/kubernetes/sdc/components/sdc-onboarding-be/values.yaml
@@ -51,16 +51,16 @@ certInitializer:
truststoreFile: "org.onap.sdc.trust.jks"
permission_user: 352070
permission_group: 35953
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_truststore_password=$cadi_truststore_password" >> {{ .Values.credsPath }}/mycreds.prop
#################################################################
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdc-onboard-backend:1.8.4
-onboardingInitImage: onap/sdc-onboard-cassandra-init:1.8.4
+image: onap/sdc-onboard-backend:1.8.5
+onboardingInitImage: onap/sdc-onboard-cassandra-init:1.8.5
pullPolicy: Always
# flag to enable debugging - application support required
diff --git a/kubernetes/sdc/components/sdc-wfd-be/values.yaml b/kubernetes/sdc/components/sdc-wfd-be/values.yaml
index 4aebe7ab9a..dbd643806c 100644
--- a/kubernetes/sdc/components/sdc-wfd-be/values.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-be/values.yaml
@@ -50,9 +50,9 @@ certInitializer:
truststoreFile: "org.onap.sdc.trust.jks"
permission_user: 352070
permission_group: 35953
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_truststore_password=$cadi_truststore_password" >> {{ .Values.credsPath }}/mycreds.prop
#################################################################
# Application configuration defaults.
diff --git a/kubernetes/sdc/components/sdc-wfd-fe/values.yaml b/kubernetes/sdc/components/sdc-wfd-fe/values.yaml
index ff8aebf6b2..e001f2f5a7 100644
--- a/kubernetes/sdc/components/sdc-wfd-fe/values.yaml
+++ b/kubernetes/sdc/components/sdc-wfd-fe/values.yaml
@@ -39,9 +39,9 @@ certInitializer:
truststoreFile: "org.onap.sdc.trust.jks"
permission_user: 352070
permission_group: 35953
- aaf_add_config: >
- /opt/app/aaf_config/bin/agent.sh local showpass
- {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop
+ aaf_add_config: |
+ echo "cadi_keystore_password_p12=$cadi_keystore_password_p12" > {{ .Values.credsPath }}/mycreds.prop
+ echo "cadi_truststore_password=$cadi_truststore_password" >> {{ .Values.credsPath }}/mycreds.prop
#################################################################
# Application configuration defaults.
diff --git a/kubernetes/sdc/requirements.yaml b/kubernetes/sdc/requirements.yaml
index 7ed88c50cc..2f2cb6c373 100644
--- a/kubernetes/sdc/requirements.yaml
+++ b/kubernetes/sdc/requirements.yaml
@@ -34,3 +34,7 @@ dependencies:
version: ~8.x-0
repository: 'file://components/sdc-wfd-fe'
condition: sdc-wfd.enabled
+ - name: sdc-helm-validator
+ version: ~8.x-0
+ repository: 'file://components/sdc-helm-validator'
+ condition: sdc-helm-validator.enabled
diff --git a/kubernetes/sdc/values.yaml b/kubernetes/sdc/values.yaml
index fef7dab310..b7476a584e 100644
--- a/kubernetes/sdc/values.yaml
+++ b/kubernetes/sdc/values.yaml
@@ -63,3 +63,5 @@ cassandra:
# dependency / sub-chart configuration
sdc-wfd:
enabled: true
+sdc-helm-validator:
+ enabled: true
diff --git a/kubernetes/sdnc/components/dmaap-listener/values.yaml b/kubernetes/sdnc/components/dmaap-listener/values.yaml
index 67282d5a53..b37b2be590 100644
--- a/kubernetes/sdnc/components/dmaap-listener/values.yaml
+++ b/kubernetes/sdnc/components/dmaap-listener/values.yaml
@@ -49,7 +49,7 @@ secrets:
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdnc-dmaap-listener-image:2.1.3
+image: onap/sdnc-dmaap-listener-image:2.1.5
pullPolicy: Always
# flag to enable debugging - application support required
diff --git a/kubernetes/sdnc/components/sdnc-ansible-server/values.yaml b/kubernetes/sdnc/components/sdnc-ansible-server/values.yaml
index 6abffb0e93..f9c8ca4401 100644
--- a/kubernetes/sdnc/components/sdnc-ansible-server/values.yaml
+++ b/kubernetes/sdnc/components/sdnc-ansible-server/values.yaml
@@ -49,7 +49,7 @@ secrets:
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdnc-ansible-server-image:2.1.3
+image: onap/sdnc-ansible-server-image:2.1.5
pullPolicy: Always
# flag to enable debugging - application support required
diff --git a/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncActive.sh b/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncActive.sh
index 5a53fa1ca2..feb6662196 100755
--- a/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncActive.sh
+++ b/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncActive.sh
@@ -17,7 +17,7 @@
*/}}
debugLog(){
- if [ "$enableDebugLogging" == true ]; then
+ if [ "$enableDebugLogging" = true ]; then
if [ $# -eq 0 ]; then
echo "" >> $LOGFILE
else
diff --git a/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncStandby.sh b/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncStandby.sh
index 9c81069812..94858339e7 100755
--- a/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncStandby.sh
+++ b/kubernetes/sdnc/components/sdnc-prom/resources/bin/ensureSdncStandby.sh
@@ -17,7 +17,7 @@
*/}}
debugLog(){
- if [ "$enableDebugLogging" == true ]; then
+ if [ "$enableDebugLogging" = true ]; then
if [ $# -eq 0 ]; then
echo "" >> $LOGFILE
else
diff --git a/kubernetes/sdnc/components/sdnc-prom/resources/bin/prom.sh b/kubernetes/sdnc/components/sdnc-prom/resources/bin/prom.sh
index 7764d00cc2..fa76a9ee40 100755
--- a/kubernetes/sdnc/components/sdnc-prom/resources/bin/prom.sh
+++ b/kubernetes/sdnc/components/sdnc-prom/resources/bin/prom.sh
@@ -24,7 +24,7 @@ fi
# should PROM start as passive?
state=$( bin/sdnc.cluster )
-if [ "$state" == "standby" ]; then
+if [ "$state" = "standby" ]; then
echo "Starting PROM in passive mode"
passive="-p"
fi
diff --git a/kubernetes/sdnc/components/sdnc-prom/resources/bin/switchVoting.sh b/kubernetes/sdnc/components/sdnc-prom/resources/bin/switchVoting.sh
index 8057547b59..c36d2e3e9f 100755
--- a/kubernetes/sdnc/components/sdnc-prom/resources/bin/switchVoting.sh
+++ b/kubernetes/sdnc/components/sdnc-prom/resources/bin/switchVoting.sh
@@ -26,7 +26,7 @@ LOGFILE="/app/geo.log"
enableDebugLogging=true
debugLog(){
- if [ "$enableDebugLogging" == true ]; then
+ if [ "$enableDebugLogging" = true ]; then
if [ $# -eq 0 ]; then
echo "" >> $LOGFILE
else
diff --git a/kubernetes/sdnc/components/sdnc-web/values.yaml b/kubernetes/sdnc/components/sdnc-web/values.yaml
index 3577c84a24..acd21ae8b9 100644
--- a/kubernetes/sdnc/components/sdnc-web/values.yaml
+++ b/kubernetes/sdnc/components/sdnc-web/values.yaml
@@ -23,7 +23,7 @@ global:
# Application configuration defaults.
#################################################################
# application image
-image: "onap/sdnc-web-image:2.1.3"
+image: "onap/sdnc-web-image:2.1.5"
pullPolicy: Always
config:
diff --git a/kubernetes/sdnc/components/ueb-listener/values.yaml b/kubernetes/sdnc/components/ueb-listener/values.yaml
index 6f8b525d77..b5c062945b 100644
--- a/kubernetes/sdnc/components/ueb-listener/values.yaml
+++ b/kubernetes/sdnc/components/ueb-listener/values.yaml
@@ -55,7 +55,7 @@ secrets:
# Application configuration defaults.
#################################################################
# application image
-image: onap/sdnc-ueb-listener-image:2.1.3
+image: onap/sdnc-ueb-listener-image:2.1.5
pullPolicy: Always
# flag to enable debugging - application support required
diff --git a/kubernetes/sdnc/templates/service.yaml b/kubernetes/sdnc/templates/service.yaml
index e3be4bc46a..693ef41af6 100644
--- a/kubernetes/sdnc/templates/service.yaml
+++ b/kubernetes/sdnc/templates/service.yaml
@@ -174,3 +174,27 @@ spec:
selector:
statefulset.kubernetes.io/pod-name: {{ include "common.fullname" . }}-2
{{ end }}
+
+{{ if .Values.config.sdnr.netconfCallHome.enabled }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}-callhome
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ include "common.release" . }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: NodePort
+ ports:
+ - name: "{{ .Values.service.portName }}-callhome"
+ port: {{ .Values.service.callHomePort }}
+ targetPort: {{ .Values.service.callHomePort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.callHomeNodePort }}
+ selector:
+ app.kubernetes.io/name: {{ include "common.name" . }}
+ app.kubernetes.io/instance: {{ include "common.release" . }}
+{{ end }}
diff --git a/kubernetes/sdnc/templates/statefulset.yaml b/kubernetes/sdnc/templates/statefulset.yaml
index 152337ee52..8a7259ba0d 100644
--- a/kubernetes/sdnc/templates/statefulset.yaml
+++ b/kubernetes/sdnc/templates/statefulset.yaml
@@ -192,6 +192,9 @@ spec:
- containerPort: {{ .Values.service.internalPort2 }}
- containerPort: {{ .Values.service.internalPort3 }}
- containerPort: {{ .Values.service.clusterPort }}
+ {{- if .Values.config.sdnr.netconfCallHome.enabled }}
+ - containerPort: {{ .Values.service.callHomePort }}
+ {{- end }}
readinessProbe:
tcpSocket:
port: {{ .Values.service.internalPort }}
@@ -305,6 +308,8 @@ spec:
{{- end }}
- name: ENABLE_OAUTH
value: "{{ .Values.config.sdnr.oauth.enabled | default "false" }}"
+ - name: SDNR_NETCONF_CALLHOME_ENABLED
+ value: "{{ .Values.config.sdnr.netconfCallHome.enabled | default "false" }}"
volumeMounts:
{{ include "common.certInitializer.volumeMount" . | indent 10 }}
{{ include "common.certServiceClient.volumeMounts" . | indent 10 }}
diff --git a/kubernetes/sdnc/values.yaml b/kubernetes/sdnc/values.yaml
index 399740ed05..9f6118051b 100644
--- a/kubernetes/sdnc/values.yaml
+++ b/kubernetes/sdnc/values.yaml
@@ -195,6 +195,7 @@ certificates:
outputType:
- jks
passwordSecretRef:
+ create: true
name: sdnc-cmpv2-keystore-password
key: password
issuer:
@@ -207,7 +208,7 @@ certificates:
# application images
pullPolicy: Always
-image: onap/sdnc-image:2.1.3
+image: onap/sdnc-image:2.1.5
# flag to enable debugging - application support required
debugEnabled: false
@@ -322,6 +323,8 @@ config:
sdnrdbTrustAllCerts: true
mountpointRegistrarEnabled: false
mountpointStateProviderEnabled: false
+ netconfCallHome:
+ enabled: true
#
# enable and set dmaap-proxy for mountpointRegistrar
dmaapProxy:
@@ -549,6 +552,9 @@ service:
geoNodePort5: 65
geoNodePort6: 66
+ callHomePort: 6666
+ callHomeNodePort: 66
+
## Persist data to a persitent volume
persistence:
enabled: true
diff --git a/kubernetes/so/components/so-bpmn-infra/values.yaml b/kubernetes/so/components/so-bpmn-infra/values.yaml
index c7ec266f7c..3e59cbfd74 100755
--- a/kubernetes/so/components/so-bpmn-infra/values.yaml
+++ b/kubernetes/so/components/so-bpmn-infra/values.yaml
@@ -62,7 +62,7 @@ secrets:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/bpmn-infra:1.8.1
+image: onap/so/bpmn-infra:1.8.2
pullPolicy: Always
db:
diff --git a/kubernetes/so/components/so-catalog-db-adapter/values.yaml b/kubernetes/so/components/so-catalog-db-adapter/values.yaml
index c83172dc24..6308e9f8de 100755
--- a/kubernetes/so/components/so-catalog-db-adapter/values.yaml
+++ b/kubernetes/so/components/so-catalog-db-adapter/values.yaml
@@ -61,7 +61,7 @@ secrets:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/catalog-db-adapter:1.8.1
+image: onap/so/catalog-db-adapter:1.8.2
pullPolicy: Always
db:
diff --git a/kubernetes/so/components/so-openstack-adapter/values.yaml b/kubernetes/so/components/so-openstack-adapter/values.yaml
index 0ecb925802..29fc50b2b2 100755
--- a/kubernetes/so/components/so-openstack-adapter/values.yaml
+++ b/kubernetes/so/components/so-openstack-adapter/values.yaml
@@ -57,7 +57,7 @@ secrets:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/openstack-adapter:1.8.1
+image: onap/so/openstack-adapter:1.8.2
pullPolicy: Always
db:
diff --git a/kubernetes/so/components/so-request-db-adapter/values.yaml b/kubernetes/so/components/so-request-db-adapter/values.yaml
index 8cf78749de..c117a7434a 100755
--- a/kubernetes/so/components/so-request-db-adapter/values.yaml
+++ b/kubernetes/so/components/so-request-db-adapter/values.yaml
@@ -57,7 +57,7 @@ secrets:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/request-db-adapter:1.8.1
+image: onap/so/request-db-adapter:1.8.2
pullPolicy: Always
db:
diff --git a/kubernetes/so/components/so-sdc-controller/values.yaml b/kubernetes/so/components/so-sdc-controller/values.yaml
index 36770ad22e..b1d7173a62 100755
--- a/kubernetes/so/components/so-sdc-controller/values.yaml
+++ b/kubernetes/so/components/so-sdc-controller/values.yaml
@@ -57,7 +57,7 @@ secrets:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/sdc-controller:1.8.1
+image: onap/so/sdc-controller:1.8.2
pullPolicy: Always
db:
diff --git a/kubernetes/so/components/so-sdnc-adapter/values.yaml b/kubernetes/so/components/so-sdnc-adapter/values.yaml
index c8e2abc4b3..9a67ef8220 100755
--- a/kubernetes/so/components/so-sdnc-adapter/values.yaml
+++ b/kubernetes/so/components/so-sdnc-adapter/values.yaml
@@ -72,7 +72,7 @@ secrets:
#################################################################
# Application configuration defaults.
#################################################################
-image: onap/so/sdnc-adapter:1.8.1
+image: onap/so/sdnc-adapter:1.8.2
pullPolicy: Always
org:
diff --git a/kubernetes/so/values.yaml b/kubernetes/so/values.yaml
index 1358795cec..ba98c344ac 100755
--- a/kubernetes/so/values.yaml
+++ b/kubernetes/so/values.yaml
@@ -162,7 +162,7 @@ dbCreds:
userName: so_user
adminName: so_admin
-image: onap/so/api-handler-infra:1.8.1
+image: onap/so/api-handler-infra:1.8.2
server:
aaf:
diff --git a/kubernetes/vfc/values.yaml b/kubernetes/vfc/values.yaml
index 19197c7f76..0560832a5f 100644
--- a/kubernetes/vfc/values.yaml
+++ b/kubernetes/vfc/values.yaml
@@ -55,6 +55,7 @@ mariadb-galera:
disableNfsProvisioner: true
serviceAccount:
nameOverride: *vfc-mariadb
+ replicaCount: 1
db: &dbConfig
mariadbService: vfc-mariadb
@@ -100,4 +101,4 @@ vfc-workflow-engine:
workflowPort: 10550
vfc-zte-vnfm-driver:
- enabled: true \ No newline at end of file
+ enabled: true
diff --git a/tox.ini b/tox.ini
index fcabf9cadc..01e9953617 100644
--- a/tox.ini
+++ b/tox.ini
@@ -17,11 +17,11 @@ commands =
[testenv:docs]
deps = -rdocs/requirements-docs.txt
commands =
- sphinx-build -W -b html -n -d {envtmpdir}/doctrees ./docs/ {toxinidir}/docs/_build/html
+ sphinx-build -q -W -b html -n -d {envtmpdir}/doctrees ./docs/ {toxinidir}/docs/_build/html
[testenv:docs-linkcheck]
deps = -rdocs/requirements-docs.txt
-commands = sphinx-build -W -b linkcheck -d {envtmpdir}/doctrees ./docs/ {toxinidir}/docs/_build/linkcheck
+commands = sphinx-build -q -W -b linkcheck -d {envtmpdir}/doctrees ./docs/ {toxinidir}/docs/_build/linkcheck
[testenv:spelling]
#basepython = python3