diff options
18 files changed, 221 insertions, 13 deletions
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml new file mode 100644 index 0000000000..770f82d2b3 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml @@ -0,0 +1,21 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +apiVersion: v1 +description: ONAP DCAE Health Check +name: dcae-healtcheck +version: 2.0.0 diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml new file mode 100644 index 0000000000..d031e2e890 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml @@ -0,0 +1,22 @@ +#============LICENSE_START======================================================== +#================================================================================= +# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. +# Copyright © 2018 Amdocs, Bell Canada +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +dependencies: + - name: common + version: ~2.0.0 + repository: '@local' diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml new file mode 100644 index 0000000000..2166ca9b54 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml @@ -0,0 +1,65 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. +# Copyright © 2018 Amdocs, Bell Canada +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: 1 + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + containers: + - name: {{ include "common.name" . }} + image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + ports: + - containerPort: {{ .Values.service.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: DCAE_NAMESPACE + value: {{ .Values.dcae_ns }} + - name: ONAP_NAMESPACE + value: {{ include "common.namespace" . }} + - name: HELM_RELEASE + value: {{ .Release.Name }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml new file mode 100644 index 0000000000..05405340e3 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml @@ -0,0 +1,45 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. +# Copyright © 2018 Amdocs, Bell Canada +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.name }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.name }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml new file mode 100644 index 0000000000..a4d2f292a5 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml @@ -0,0 +1,54 @@ +#============LICENSE_START======================================================== +#================================================================================= +# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved. +# Copyright © 2018 Amdocs, Bell Canada +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiZGNhZUBkY2FlLm9uYXAub3JnIiwiYXV0aCI6IlpHOWphMlZ5T21SdlkydGxjZz09In19 + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + +service: + name: dcae-healthcheck + internalPort: 80 + externalPort: 80 + type: ClusterIP + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 +# application image +repository: nexus3.onap.org:10001 +image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.0.0 + +# Kubernetes namespace for components deployed via Cloudify manager +# If empty, use the common namespace +dcae_ns: "dcae" + diff --git a/kubernetes/dcaegen2/charts/redis/.helmignore b/kubernetes/dcaegen2/charts/dcae-redis/.helmignore index f0c1319444..f0c1319444 100644 --- a/kubernetes/dcaegen2/charts/redis/.helmignore +++ b/kubernetes/dcaegen2/charts/dcae-redis/.helmignore diff --git a/kubernetes/dcaegen2/charts/redis/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-redis/Chart.yaml index 692b7ab5d9..271458c8df 100644 --- a/kubernetes/dcaegen2/charts/redis/Chart.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/Chart.yaml @@ -14,5 +14,5 @@ apiVersion: v1 description: ONAP DCAE Redis -name: redis +name: dcae-redis version: 2.0.0 diff --git a/kubernetes/dcaegen2/charts/redis/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-redis/requirements.yaml index 7244af3970..7244af3970 100644 --- a/kubernetes/dcaegen2/charts/redis/requirements.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/requirements.yaml diff --git a/kubernetes/dcaegen2/charts/redis/resources/redis/scripts/redis-cluster-config.sh b/kubernetes/dcaegen2/charts/dcae-redis/resources/redis/scripts/redis-cluster-config.sh index 3431e7e6e7..3431e7e6e7 100755 --- a/kubernetes/dcaegen2/charts/redis/resources/redis/scripts/redis-cluster-config.sh +++ b/kubernetes/dcaegen2/charts/dcae-redis/resources/redis/scripts/redis-cluster-config.sh diff --git a/kubernetes/dcaegen2/charts/redis/templates/NOTES.txt b/kubernetes/dcaegen2/charts/dcae-redis/templates/NOTES.txt index d333bfc159..d333bfc159 100644 --- a/kubernetes/dcaegen2/charts/redis/templates/NOTES.txt +++ b/kubernetes/dcaegen2/charts/dcae-redis/templates/NOTES.txt diff --git a/kubernetes/dcaegen2/charts/redis/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/configmap.yaml index 85ebee672b..85ebee672b 100644 --- a/kubernetes/dcaegen2/charts/redis/templates/configmap.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/templates/configmap.yaml diff --git a/kubernetes/dcaegen2/charts/redis/templates/pv.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/pv.yaml index 2d7e25dd2c..2d7e25dd2c 100644 --- a/kubernetes/dcaegen2/charts/redis/templates/pv.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/templates/pv.yaml diff --git a/kubernetes/dcaegen2/charts/redis/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/service.yaml index b3ee24dba2..636f512a53 100644 --- a/kubernetes/dcaegen2/charts/redis/templates/service.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/templates/service.yaml @@ -15,7 +15,7 @@ apiVersion: v1 kind: Service metadata: - name: {{ include "common.fullname" . }} + name: {{ include "common.servicename" . }} namespace: {{ include "common.namespace" . }} labels: app: {{ include "common.name" . }} @@ -31,17 +31,17 @@ spec: #Example internal target port if required #targetPort: {{ .Values.service.internalPort }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.name }} + name: {{ .Values.service.portName }} - port: {{ .Values.service.externalPort2 }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }} - name: {{ .Values.service.name2 }} + name: {{ .Values.service.portName2 }} {{- else -}} - port: {{ .Values.service.externalPort }} targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.name }} + name: {{ .Values.service.portName }} - port: {{ .Values.service.externalPort2 }} targetPort: {{ .Values.service.internalPort2 }} - name: {{ .Values.service.name2 }} + name: {{ .Values.service.portName2 }} {{- end}} selector: app: {{ include "common.name" . }} diff --git a/kubernetes/dcaegen2/charts/redis/templates/statefulset.yaml b/kubernetes/dcaegen2/charts/dcae-redis/templates/statefulset.yaml index 472471416b..472471416b 100644 --- a/kubernetes/dcaegen2/charts/redis/templates/statefulset.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/templates/statefulset.yaml diff --git a/kubernetes/dcaegen2/charts/redis/values.yaml b/kubernetes/dcaegen2/charts/dcae-redis/values.yaml index 7b38163bbc..9a5eacdcc9 100644 --- a/kubernetes/dcaegen2/charts/redis/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-redis/values.yaml @@ -29,7 +29,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.deployments.redis-cluster-container.redis-cluster-container:1.0.0 +image: onap/org.onap.dcaegen2.deployments.redis-cluster-container:1.0.0 pullPolicy: Always # application configuration @@ -61,11 +61,12 @@ service: #Services may use any combination of ports depending on the 'type' of #service being defined. type: NodePort - name: client + name: dcae-redis + portName: client externalPort: 6379 internalPort: 6379 nodePort: 86 - name2: gossip + portName2: gossip externalPort2: 16379 internalPort2: 16379 nodePort2: 87 diff --git a/kubernetes/multicloud/templates/service.yaml b/kubernetes/multicloud/templates/service.yaml index 9f18c5e236..2b600ae35e 100644 --- a/kubernetes/multicloud/templates/service.yaml +++ b/kubernetes/multicloud/templates/service.yaml @@ -31,7 +31,7 @@ metadata: "version": "v0", "url": "/api/multicloud/v0", "protocol": "REST", - "port": {{ .Values.service.externalPort }}, + "port": "{{ .Values.service.externalPort }}", "visualRange": "1" } ]' diff --git a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py index 1915efedab..571ea9f20d 100755 --- a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py @@ -92,5 +92,5 @@ GLOBAL_HEAT_TEMPLATES_FOLDER = "/share/heat" # Log info GLOBAL_LOG_SERVER_PROTOCOL = "http" GLOBAL_LOG_ELASTICSEARCH_PORT = "9200" -GLOBAL_LOG_LOGSTASH_PORT = "5044" +GLOBAL_LOG_LOGSTASH_PORT = "9600" GLOBAL_LOG_KIBANA_PORT = "5601" diff --git a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py index 47d42bcfb3..7aa9581580 100755 --- a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py @@ -15,7 +15,7 @@ GLOBAL_INJECTED_EXTERNAL_DNS = "N/A" GLOBAL_INJECTED_GERRIT_BRANCH = "master" GLOBAL_INJECTED_LOG_ELASTICSEARCH_IP_ADDR = "log-es.{{include "common.namespace" .}}" GLOBAL_INJECTED_LOG_KIBANA_IP_ADDR = "log-kibana.{{include "common.namespace" .}}" -GLOBAL_INJECTED_LOG_LOGSTASH_IP_ADDR = "log-ls.{{include "common.namespace" .}}" +GLOBAL_INJECTED_LOG_LOGSTASH_IP_ADDR = "log-ls-http.{{include "common.namespace" .}}" GLOBAL_INJECTED_KEYSTONE = "{{ .Values.openStackKeyStoneUrl }}" GLOBAL_INJECTED_MR_IP_ADDR = "message-router.{{include "common.namespace" .}}" GLOBAL_INJECTED_MSO_IP_ADDR = "so.{{include "common.namespace" .}}" @@ -100,4 +100,4 @@ GLOBAL_INJECTED_PROPERTIES = { "GLOBAL_INJECTED_VID_IP_ADDR" : "{{.Release.Name}}-vid.{{include "common.namespace" .}}", "GLOBAL_INJECTED_VM_FLAVOR" : "{{ .Values.openStackFlavourMedium }}", "GLOBAL_INJECTED_VNFSDK_IP_ADDR" : "{{.Release.Name}}-vnfsdk.{{include "common.namespace" .}}" -}
\ No newline at end of file +} |