diff options
33 files changed, 326 insertions, 117 deletions
diff --git a/.gitreview b/.gitreview index eabfdc6550..73e222e412 100644 --- a/.gitreview +++ b/.gitreview @@ -2,4 +2,4 @@ host=gerrit.onap.org port=29418 project=oom -defaultbranch=master +defaultbranch=casablanca diff --git a/docs/oom_cloud_setup_guide.rst b/docs/oom_cloud_setup_guide.rst index 9fb3ab73b1..f43531a03a 100644 --- a/docs/oom_cloud_setup_guide.rst +++ b/docs/oom_cloud_setup_guide.rst @@ -1,18 +1,18 @@ .. This work is licensed under a Creative Commons Attribution 4.0 .. International License. .. http://creativecommons.org/licenses/by/4.0 -.. Copyright 2018 Amdocs, Bell Canada +.. Copyright 2019 Amdocs, Bell Canada .. Links -.. _Microsoft Azure: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Microsoft+Azure -.. _Amazon AWS: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Amazon+EC2 -.. _Google GCE: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Google+Compute+Engine +.. _Microsoft Azure: https://wiki.onap.org/display/DW/Cloud+Native+Deployment#CloudNativeDeployment-MicrosoftAzure +.. _Amazon AWS: https://wiki.onap.org/display/DW/Cloud+Native+Deployment#CloudNativeDeployment-AmazonAWS +.. _Google GCE: https://wiki.onap.org/display/DW/Cloud+Native+Deployment#CloudNativeDeployment-GoogleGCE .. _VMware VIO: https://wiki.onap.org/display/DW/ONAP+on+VMware+Integrated+OpenStack+-+Container+Orchestration .. _OpenStack: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+OpenStack?src=contextnavpagetreemode -.. _Setting Up Kubernetes with Rancher: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Rancher +.. _Setting Up Kubernetes with Rancher: https://wiki.onap.org/display/DW/Cloud+Native+Deployment .. _Setting Up Kubernetes with Kubeadm: https://wiki.onap.org/display/DW/Deploying+Kubernetes+Cluster+with+kubeadm -.. _Setting Up Kubernetes with Cloudify: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes+on+Cloudify -.. _ONAP on Kubernetes Wiki: https://wiki.onap.org/display/DW/ONAP+on+Kubernetes +.. _Cloud Native Deployment Wiki: https://wiki.onap.org/display/DW/Cloud+Native+Deployment +.. _ONAP Development - 110 pod limit Wiki: https://wiki.onap.org/display/DW/ONAP+Development#ONAPDevelopment-Changemax-podsfromdefault110podlimit .. figure:: oomLogoV2-medium.png :align: right @@ -50,7 +50,7 @@ The versions of Kubernetes that are supported by OOM are as follows: ============== =========== ===== ======== ======== amsterdam 1.7.x 2.3.x 1.7.x 1.12.x beijing 1.8.10 2.8.2 1.8.10 17.03.x - casablanca 1.11.2 2.9.1 1.11.2 17.03.x + casablanca 1.11.5 2.9.1 1.11.5 17.03.x ============== =========== ===== ======== ======== Minimum Hardware Configuration @@ -69,7 +69,9 @@ components that are needed will drastically reduce the requirements. ===== ===== ====== ==================== .. note:: - Kubernetes supports a maximum of 110 pods per node. The use of many small + Kubernetes supports a maximum of 110 pods per node - configurable in the --max-pods=n setting off the + "additional kubelet flags" box in the kubernetes template window described in 'ONAP Development - 110 pod limit Wiki' + - this limit does not need to be modified . The use of many small nodes is preferred over a few larger nodes (for example 14x16GB - 8 vCores each). Subsets of ONAP may still be deployed on a single node. @@ -98,4 +100,4 @@ OOM can be deployed on a private set of physical hosts or VMs (or even a combination of the two). The following guide describe the recommended method to setup a Kubernetes cluster: :ref:`onap-on-kubernetes-with-rancher`. -There are alternative deployment methods described on the `ONAP on Kubernetes Wiki`_ +There are alternative deployment methods described on the `Cloud Native Deployment Wiki`_ diff --git a/kubernetes/aai/charts/aai-babel/values.yaml b/kubernetes/aai/charts/aai-babel/values.yaml index b26b858c4f..164905ff23 100644 --- a/kubernetes/aai/charts/aai-babel/values.yaml +++ b/kubernetes/aai/charts/aai-babel/values.yaml @@ -25,7 +25,7 @@ global: ################################################################# # application image -image: onap/babel:1.3.2 +image: onap/babel:1.3.3 flavor: small diff --git a/kubernetes/aai/charts/aai-champ/values.yaml b/kubernetes/aai/charts/aai-champ/values.yaml index c247313a39..0113ba496a 100644 --- a/kubernetes/aai/charts/aai-champ/values.yaml +++ b/kubernetes/aai/charts/aai-champ/values.yaml @@ -25,7 +25,7 @@ global: ################################################################# # application image -image: onap/champ:1.3.0 +image: onap/champ:1.3.1 flavor: small diff --git a/kubernetes/aai/charts/aai-data-router/values.yaml b/kubernetes/aai/charts/aai-data-router/values.yaml index dbcea40a51..44dce39b89 100644 --- a/kubernetes/aai/charts/aai-data-router/values.yaml +++ b/kubernetes/aai/charts/aai-data-router/values.yaml @@ -21,7 +21,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/data-router:1.3.1 +image: onap/data-router:1.3.2 pullPolicy: Always restartPolicy: Always flavor: small diff --git a/kubernetes/aai/charts/aai-gizmo/values.yaml b/kubernetes/aai/charts/aai-gizmo/values.yaml index 7220cd52fd..54475b4229 100644 --- a/kubernetes/aai/charts/aai-gizmo/values.yaml +++ b/kubernetes/aai/charts/aai-gizmo/values.yaml @@ -23,7 +23,7 @@ global: ################################################################# # application image -image: onap/gizmo:1.3.0 +image: onap/gizmo:1.3.2 flavor: small # application configuration config: diff --git a/kubernetes/aai/charts/aai-graphadmin/templates/job.yaml b/kubernetes/aai/charts/aai-graphadmin/templates/job.yaml index cdcf2b1d9f..4d571d0526 100644 --- a/kubernetes/aai/charts/aai-graphadmin/templates/job.yaml +++ b/kubernetes/aai/charts/aai-graphadmin/templates/job.yaml @@ -93,7 +93,7 @@ spec: - mountPath: /opt/app/aai-graphadmin/resources/etc/appprops/aaiconfig.properties name: {{ include "common.fullname" . }}-aaiconfig-conf subPath: aaiconfig.properties - - mountPath: /opt/aai/logroot/AAI-RES + - mountPath: /opt/aai/logroot/AAI-GA name: {{ include "common.fullname" . }}-logs - mountPath: /opt/app/aai-graphadmin/resources/logback.xml name: {{ include "common.fullname" . }}-log-conf @@ -128,7 +128,8 @@ spec: configMap: name: aai-filebeat - name: {{ include "common.fullname" . }}-logs - emptyDir: {} + hostPath: + path: {{ .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}-create-db-schema - name: {{ include "common.fullname" . }}-filebeat emptyDir: {} - name: {{ include "common.fullname" . }}-log-conf diff --git a/kubernetes/aai/charts/aai-graphadmin/values.yaml b/kubernetes/aai/charts/aai-graphadmin/values.yaml index 3b893194e4..fecc3aeabe 100644 --- a/kubernetes/aai/charts/aai-graphadmin/values.yaml +++ b/kubernetes/aai/charts/aai-graphadmin/values.yaml @@ -28,7 +28,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/aai-graphadmin:1.0.1 +image: onap/aai-graphadmin:1.0.4 pullPolicy: Always restartPolicy: Always flavor: small @@ -38,6 +38,9 @@ replicaCount: 1 # Configuration for the graphadmin deployment config: + groupId: 1000 + userId: 1000 + # Specifies the timeout limit for the REST API requests timeout: enabled: true @@ -107,6 +110,10 @@ service: ingress: enabled: false +persistence: + mountPath: /dockerdata-nfs + mountSubPath: aai/aai-graphadmin + resources: small: limits: diff --git a/kubernetes/aai/charts/aai-modelloader/values.yaml b/kubernetes/aai/charts/aai-modelloader/values.yaml index 038be90410..52a7efda12 100644 --- a/kubernetes/aai/charts/aai-modelloader/values.yaml +++ b/kubernetes/aai/charts/aai-modelloader/values.yaml @@ -21,7 +21,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/model-loader:1.3.1 +image: onap/model-loader:1.3.2 pullPolicy: Always restartPolicy: Always flavor: small diff --git a/kubernetes/aai/charts/aai-resources/values.yaml b/kubernetes/aai/charts/aai-resources/values.yaml index d7813ead11..a754778c52 100644 --- a/kubernetes/aai/charts/aai-resources/values.yaml +++ b/kubernetes/aai/charts/aai-resources/values.yaml @@ -22,7 +22,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/aai-resources:1.3.4 +image: onap/aai-resources:1.3.5 pullPolicy: Always restartPolicy: Always flavor: small diff --git a/kubernetes/aai/charts/aai-search-data/values.yaml b/kubernetes/aai/charts/aai-search-data/values.yaml index 292e23c59c..a28aaa9458 100644 --- a/kubernetes/aai/charts/aai-search-data/values.yaml +++ b/kubernetes/aai/charts/aai-search-data/values.yaml @@ -23,7 +23,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/search-data-service:1.3.1 +image: onap/search-data-service:1.3.2 pullPolicy: Always restartPolicy: Always flavor: small diff --git a/kubernetes/aai/charts/aai-sparky-be/values.yaml b/kubernetes/aai/charts/aai-sparky-be/values.yaml index 1c2b0cc5b7..854a3465ec 100644 --- a/kubernetes/aai/charts/aai-sparky-be/values.yaml +++ b/kubernetes/aai/charts/aai-sparky-be/values.yaml @@ -28,7 +28,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/sparky-be:1.3.0 +image: onap/sparky-be:1.3.2 pullPolicy: Always restartPolicy: Always flavor: small diff --git a/kubernetes/aai/charts/aai-traversal/values.yaml b/kubernetes/aai/charts/aai-traversal/values.yaml index 58c5ebfd3d..af6ad6cbd0 100644 --- a/kubernetes/aai/charts/aai-traversal/values.yaml +++ b/kubernetes/aai/charts/aai-traversal/values.yaml @@ -23,7 +23,7 @@ global: # global defaults # application image repository: nexus3.onap.org:10001 -image: onap/aai-traversal:1.3.3 +image: onap/aai-traversal:1.3.4 pullPolicy: Always restartPolicy: Always flavor: small diff --git a/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf b/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf index 317b428c77..78ca65a3c2 100644 --- a/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf +++ b/kubernetes/clamp/charts/clamp-dash-logstash/resources/config/pipeline.conf @@ -57,13 +57,13 @@ filter { drop { } } - if [http_request_failure] or [@metadata][code] != "200" { + if [http_request_failure] or [@metadata][code] != 200 { mutate { add_tag => [ "error" ] } } - if "dmaap_source" in [tags] { + if "dmaap_source" in [@metadata][request][tags] { # # Dmaap provides a json list, whose items are Strings containing the event # provided to Dmaap, which itself is an escaped json. @@ -76,13 +76,26 @@ filter { source => "[message]" target => "message" } - ruby { - code => " - for ev in event.get('message', []) - ev.set('@metadata', event.get('@metadata')) - end - " - } +# ruby { +# code => ' +# require "json" +# puts "\n======================================= MESSAGE" +# print event.get("message") +# puts "\n======================================= METADATA" +# print event.get("@metadata") +# puts "" +# +# +# for ev in event.get("message") +# puts "\n======================================= PARSED JSON EV" +# print JSON.parse(ev) +# puts "\n======================================= JSON EV" +# print JSON.parse(ev).get("@metadata") +# puts "" +# ev.set("[@metadata]", event.get("@metadata")) +# end +# ' + # } split { field => "message" @@ -194,7 +207,7 @@ filter { } - if "error" not in [tags] { + if "error" not in [@metadata][request][tags]{ # # Creating data for a secondary index # @@ -203,7 +216,7 @@ filter { add_tag => [ "event-cl-aggs" ] } - if "event-cl-aggs" in [tags] { + if "event-cl-aggs" in [@metadata][request][tags]{ # # we only need a few fields for aggregations; remove all fields from clone except : # vmName,vnfName,vnfType,requestID,closedLoopAlarmStart, closedLoopControlName,closedLoopAlarmEnd,abated,nbrDmaapevents,finalFailure diff --git a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml index c266bdbfae..5f7bf9ddf9 100644 --- a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml +++ b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml @@ -24,7 +24,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/multicloud/openstack-ocata:1.2.1 +image: onap/multicloud/openstack-ocata:1.2.3 pullPolicy: Always #Istio sidecar injection policy diff --git a/kubernetes/multicloud/charts/multicloud-pike/values.yaml b/kubernetes/multicloud/charts/multicloud-pike/values.yaml index 962a3ca175..f68d1e8702 100644 --- a/kubernetes/multicloud/charts/multicloud-pike/values.yaml +++ b/kubernetes/multicloud/charts/multicloud-pike/values.yaml @@ -23,7 +23,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/multicloud/openstack-pike:1.2.1 +image: onap/multicloud/openstack-pike:1.2.3 pullPolicy: Always #Istio sidecar injection policy diff --git a/kubernetes/multicloud/charts/multicloud-windriver/values.yaml b/kubernetes/multicloud/charts/multicloud-windriver/values.yaml index f9039d94e9..86b91f00a3 100644 --- a/kubernetes/multicloud/charts/multicloud-windriver/values.yaml +++ b/kubernetes/multicloud/charts/multicloud-windriver/values.yaml @@ -24,7 +24,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/multicloud/openstack-windriver:1.2.1 +image: onap/multicloud/openstack-windriver:1.2.3 pullPolicy: Always #Istio sidecar injection policy diff --git a/kubernetes/oof/charts/oof-has/values.yaml b/kubernetes/oof/charts/oof-has/values.yaml index d825e4437b..d223f4b9a2 100755 --- a/kubernetes/oof/charts/oof-has/values.yaml +++ b/kubernetes/oof/charts/oof-has/values.yaml @@ -25,7 +25,7 @@ global: commonConfigPrefix: onap-oof-has image: readiness: oomk8s/readiness-check:2.0.0 - optf_has: onap/optf-has:1.2.4 + optf_has: onap/optf-has:1.2.5 filebeat: docker.elastic.co/beats/filebeat:5.5.0 pullPolicy: Always diff --git a/kubernetes/policy/charts/brmsgw/values.yaml b/kubernetes/policy/charts/brmsgw/values.yaml index d7c9535cf2..a03dab5ccd 100644 --- a/kubernetes/policy/charts/brmsgw/values.yaml +++ b/kubernetes/policy/charts/brmsgw/values.yaml @@ -1,5 +1,5 @@ # Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T +# Modifications Copyright © 2018-2019 AT&T # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -26,7 +26,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-pe:1.3.4 +image: onap/policy-pe:1.3.5 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/policy/charts/drools/values.yaml b/kubernetes/policy/charts/drools/values.yaml index 2451ceac1a..2858dea84e 100644 --- a/kubernetes/policy/charts/drools/values.yaml +++ b/kubernetes/policy/charts/drools/values.yaml @@ -1,5 +1,5 @@ # Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T +# Modifications Copyright © 2018-2019 AT&T # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,7 +28,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-drools:1.3.4 +image: onap/policy-drools:1.3.5 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/policy/charts/pdp/values.yaml b/kubernetes/policy/charts/pdp/values.yaml index 1b2d494546..2cb1741a55 100644 --- a/kubernetes/policy/charts/pdp/values.yaml +++ b/kubernetes/policy/charts/pdp/values.yaml @@ -1,5 +1,5 @@ # Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T +# Modifications Copyright © 2018-2019 AT&T # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,7 +28,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-pe:1.3.4 +image: onap/policy-pe:1.3.5 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/policy/charts/policy-apex-pdp/resources/config/config.json b/kubernetes/policy/charts/policy-apex-pdp/resources/config/config.json index c8908c7b91..57542c3510 100644 --- a/kubernetes/policy/charts/policy-apex-pdp/resources/config/config.json +++ b/kubernetes/policy/charts/policy-apex-pdp/resources/config/config.json @@ -5,7 +5,7 @@ # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, @@ -16,63 +16,49 @@ # SPDX-License-Identifier: Apache-2.0 # ============LICENSE_END========================================================= { - "engineServiceParameters": { - "name": "PolicyApexPDPEngine", - "version": "0.0.1", - "id": 45, - "instanceCount": 4, - "deploymentPort": 12345, - "engineParameters": { - "executorParameters": { - "JAVASCRIPT": { - "parameterClassName": "org.onap.policy.apex.plugins.executor.javascript.JavascriptExecutorParameters" - } - }, - "contextParameters": { - "parameterClassName": "org.onap.policy.apex.context.parameters.ContextParameters", - "schemaParameters": { - "Avro": { - "parameterClassName": "org.onap.policy.apex.plugins.context.schema.avro.AvroSchemaHelperParameters" - } - } - } - } - }, - "eventInputParameters": { - "ApexConsumer": { - "carrierTechnologyParameters" : { - "carrierTechnology" : "RESTSERVER", - "parameterClassName" : - "org.onap.policy.apex.plugins.event.carrier.restserver.RestServerCarrierTechnologyParameters", - "parameters" : { - "standalone" : true, - "host" : "localhost", - "port" : 12346 - } - }, - "eventProtocolParameters":{ - "eventProtocol" : "JSON" - }, - "synchronousMode" : true, - "synchronousPeer" : "ApexProducer", - "synchronousTimeout" : 500 - } - }, - "eventOutputParameters": { - "ApexProducer": { - "carrierTechnologyParameters":{ - "carrierTechnology" : "RESTSERVER", - "parameterClassName" : - "org.onap.policy.apex.plugins.event.carrier.restserver.RestServerCarrierTechnologyParameters" - }, - "eventProtocolParameters":{ - "eventProtocol" : "JSON" - }, - "synchronousMode" : true, - "synchronousPeer" : "ApexConsumer", - "synchronousTimeout" : 500 - } + "javaProperties" : [ + ["javax.net.ssl.trustStore", "/opt/app/policy/apex-pdp/etc/ssl/policy-truststore"], + ["javax.net.ssl.trustStorePassword", "UG9sMWN5XzBuYXA="] + ], + "engineServiceParameters": { + "name": "MyApexEngine", + "version": "0.0.1", + "id": 45, + "instanceCount": 4, + "deploymentPort": 12345, + "policyModelFileName": "examples/models/SampleDomain/SamplePolicyModelJAVASCRIPT.json", + "engineParameters": { + "executorParameters": { + "JAVASCRIPT": { + "parameterClassName": "org.onap.policy.apex.plugins.executor.javascript.JavascriptExecutorParameters" } + } + } + }, + "eventOutputParameters": { + "FirstProducer": { + "carrierTechnologyParameters": { + "carrierTechnology": "FILE", + "parameters": { + "standardIo": true + } + }, + "eventProtocolParameters": { + "eventProtocol": "JSON" + } + } + }, + "eventInputParameters": { + "FirstConsumer": { + "carrierTechnologyParameters": { + "carrierTechnology": "FILE", + "parameters": { + "standardIo": true + } + }, + "eventProtocolParameters": { + "eventProtocol": "JSON" + } + } + } } - - diff --git a/kubernetes/policy/charts/policy-apex-pdp/values.yaml b/kubernetes/policy/charts/policy-apex-pdp/values.yaml index b84b769660..eed0bae0db 100644 --- a/kubernetes/policy/charts/policy-apex-pdp/values.yaml +++ b/kubernetes/policy/charts/policy-apex-pdp/values.yaml @@ -1,5 +1,6 @@ # ============LICENSE_START======================================================= # Copyright (C) 2018 Ericsson. All rights reserved. +# Modifications Copyright © 2019 AT&T # ================================================================================ # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,7 +29,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-apex-pdp:2.0.3 +image: onap/policy-apex-pdp:2.0.4 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/policy/charts/policy-distribution/resources/config/config.json b/kubernetes/policy/charts/policy-distribution/resources/config/config.json index b0a6504555..5591e58e32 100644 --- a/kubernetes/policy/charts/policy-distribution/resources/config/config.json +++ b/kubernetes/policy/charts/policy-distribution/resources/config/config.json @@ -21,7 +21,8 @@ "host":"0.0.0.0", "port":6969, "userName":"healthcheck", - "password":"zb!XztG34" + "password":"zb!XztG34", + "https":true }, "receptionHandlerParameters":{ "SDCReceptionHandler":{ @@ -107,14 +108,14 @@ "xacmlPdpConfiguration":{ "parameterClassName":"org.onap.policy.distribution.forwarding.xacml.pdp.XacmlPdpPolicyForwarderParameterGroup", "parameters":{ - "useHttps": false, + "useHttps": true, "hostname": "pdp", "port": 8081, "userName": "testpdp", "password": "alpha123", "clientAuth": "cHl0aG9uOnRlc3Q=", "isManaged": true, - "pdpGroup": "pdpGroup" + "pdpGroup": "default" } }, "apexForwarderConfiguration":{ diff --git a/kubernetes/policy/charts/policy-distribution/values.yaml b/kubernetes/policy/charts/policy-distribution/values.yaml index 240c266cb4..ab2cedeb77 100644 --- a/kubernetes/policy/charts/policy-distribution/values.yaml +++ b/kubernetes/policy/charts/policy-distribution/values.yaml @@ -1,5 +1,6 @@ # ============LICENSE_START======================================================= # Copyright (C) 2018 Ericsson. All rights reserved. +# Modifications Copyright © 2019 AT&T # ================================================================================ # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -27,7 +28,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-distribution:2.0.3 +image: onap/policy-distribution:2.0.4 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/policy/values.yaml b/kubernetes/policy/values.yaml index 521a229078..74d8ad6108 100644 --- a/kubernetes/policy/values.yaml +++ b/kubernetes/policy/values.yaml @@ -1,5 +1,5 @@ # Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T +# Modifications Copyright © 2018-2019 AT&T # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -41,7 +41,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/policy-pe:1.3.4 +image: onap/policy-pe:1.3.5 pullPolicy: Always subChartsOnly: @@ -117,4 +117,4 @@ resources: requests: cpu: 20m memory: 2Gi - unlimited: {}
\ No newline at end of file + unlimited: {} diff --git a/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh b/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh new file mode 100644 index 0000000000..f00bf8b71d --- /dev/null +++ b/kubernetes/portal/charts/portal-mariadb/resources/config/mariadb/docker-entrypoint.sh @@ -0,0 +1,190 @@ +#!/bin/bash +set -eo pipefail +shopt -s nullglob + +# if command starts with an option, prepend mysqld +if [ "${1:0:1}" = '-' ]; then + set -- mysqld "$@" +fi + +# skip setup if they want an option that stops mysqld +wantHelp= +for arg; do + case "$arg" in + -'?'|--help|--print-defaults|-V|--version) + wantHelp=1 + break + ;; + esac +done + +# usage: file_env VAR [DEFAULT] +# ie: file_env 'XYZ_DB_PASSWORD' 'example' +# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of +# "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature) +file_env() { + local var="$1" + local fileVar="${var}_FILE" + local def="${2:-}" + if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then + echo >&2 "error: both $var and $fileVar are set (but are exclusive)" + exit 1 + fi + local val="$def" + if [ "${!var:-}" ]; then + val="${!var}" + elif [ "${!fileVar:-}" ]; then + val="$(< "${!fileVar}")" + fi + export "$var"="$val" + unset "$fileVar" +} + +_check_config() { + toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" ) + if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then + cat >&2 <<-EOM + + ERROR: mysqld failed while attempting to check config + command was: "${toRun[*]}" + + $errors + EOM + exit 1 + fi +} + +# Fetch value from server config +# We use mysqld --verbose --help instead of my_print_defaults because the +# latter only show values present in config files, and not server defaults +_get_config() { + local conf="$1"; shift + "$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null | awk '$1 == "'"$conf"'" { print $2; exit }' +} + +# allow the container to be started with `--user` +if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then + _check_config "$@" + DATADIR="$(_get_config 'datadir' "$@")" + mkdir -p "$DATADIR" + find "$DATADIR" \! -user mysql -exec chown mysql '{}' + + exec gosu mysql "$BASH_SOURCE" "$@" +fi + +if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then + # still need to check config, container may have started with --user + _check_config "$@" + # Get config + DATADIR="$(_get_config 'datadir' "$@")" + + if [ ! -d "$DATADIR/mysql" ]; then + file_env 'MYSQL_ROOT_PASSWORD' + if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + echo >&2 'error: database is uninitialized and password option is not specified ' + echo >&2 ' You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD' + exit 1 + fi + + mkdir -p "$DATADIR" + + echo 'Initializing database' + # "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here) + mysql_install_db --datadir="$DATADIR" --rpm "${@:2}" + echo 'Database initialized' + + SOCKET="$(_get_config 'socket' "$@")" + "$@" --skip-networking --socket="${SOCKET}" & + pid="$!" + + mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" ) + + for i in {60..0}; do + if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then + break + fi + echo 'MySQL init process in progress...' + sleep 1 + done + if [ "$i" = 0 ]; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then + # sed is for https://bugs.mysql.com/bug.php?id=20545 + mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql + fi + + if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then + export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)" + echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD" + fi + + rootCreate= + # default root to listen for connections from anywhere + file_env 'MYSQL_ROOT_HOST' '%' + if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then + # no, we don't care if read finds a terminating character in this heredoc + # https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151 + read -r -d '' rootCreate <<-EOSQL || true + CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ; + GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ; + EOSQL + fi + + "${mysql[@]}" <<-EOSQL + -- What's done in this file shouldn't be replicated + -- or products like mysql-fabric won't work + SET @@SESSION.SQL_LOG_BIN=0; + + DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ; + SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ; + GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ; + ${rootCreate} + DROP DATABASE IF EXISTS test ; + FLUSH PRIVILEGES ; + EOSQL + + if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then + mysql+=( -p"${MYSQL_ROOT_PASSWORD}" ) + fi + + file_env 'MYSQL_DATABASE' + if [ "$MYSQL_DATABASE" ]; then + echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}" + mysql+=( "$MYSQL_DATABASE" ) + fi + + file_env 'MYSQL_USER' + file_env 'MYSQL_PASSWORD' + if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then + echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}" + + if [ "$MYSQL_DATABASE" ]; then + echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}" + fi + fi + + echo + for f in /docker-entrypoint-initdb.d/*; do + case "$f" in + *.sh) echo "$0: running $f"; . "$f" ;; + *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; + *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; + *) echo "$0: ignoring $f" ;; + esac + echo + done + + if ! kill -s TERM "$pid" || ! wait "$pid"; then + echo >&2 'MySQL init process failed.' + exit 1 + fi + + echo + echo 'MySQL init process done. Ready for start up.' + echo + fi +fi + +exec "$@"
\ No newline at end of file diff --git a/kubernetes/portal/charts/portal-mariadb/templates/deployment.yaml b/kubernetes/portal/charts/portal-mariadb/templates/deployment.yaml index 20fa9cecc2..aeaef14f83 100644 --- a/kubernetes/portal/charts/portal-mariadb/templates/deployment.yaml +++ b/kubernetes/portal/charts/portal-mariadb/templates/deployment.yaml @@ -65,6 +65,9 @@ spec: - mountPath: /etc/localtime name: localtime readOnly: true + - mountPath: /usr/local/bin/docker-entrypoint.sh + subPath: docker-entrypoint.sh + name: docker-entry resources: {{ include "common.resources" . | indent 12 }} {{- if .Values.nodeSelector }} @@ -86,5 +89,9 @@ spec: - name: localtime hostPath: path: /etc/localtime + - name: docker-entry + configMap: + name: {{ include "common.fullname" . }}-mariadb + defaultMode: 0755 imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/sdnc/charts/dmaap-listener/values.yaml b/kubernetes/sdnc/charts/dmaap-listener/values.yaml index 917a6a2b20..ef11efe921 100644 --- a/kubernetes/sdnc/charts/dmaap-listener/values.yaml +++ b/kubernetes/sdnc/charts/dmaap-listener/values.yaml @@ -27,7 +27,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/sdnc-dmaap-listener-image:1.4.3 +image: onap/sdnc-dmaap-listener-image:1.4.4 pullPolicy: Always # flag to enable debugging - application support required @@ -91,4 +91,4 @@ resources: requests: cpu: 1 memory: 2Gi - unlimited: {}
\ No newline at end of file + unlimited: {} diff --git a/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml b/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml index a9cb46965f..b0686b137b 100644 --- a/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml +++ b/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml @@ -27,7 +27,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/sdnc-ansible-server-image:1.4.3 +image: onap/sdnc-ansible-server-image:1.4.4 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/sdnc/charts/sdnc-portal/values.yaml b/kubernetes/sdnc/charts/sdnc-portal/values.yaml index 7dc57fd918..22793adfbc 100644 --- a/kubernetes/sdnc/charts/sdnc-portal/values.yaml +++ b/kubernetes/sdnc/charts/sdnc-portal/values.yaml @@ -27,7 +27,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/admportal-sdnc-image:1.4.3 +image: onap/admportal-sdnc-image:1.4.4 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/sdnc/charts/ueb-listener/values.yaml b/kubernetes/sdnc/charts/ueb-listener/values.yaml index c44ba959d3..f1ef3769b7 100644 --- a/kubernetes/sdnc/charts/ueb-listener/values.yaml +++ b/kubernetes/sdnc/charts/ueb-listener/values.yaml @@ -27,7 +27,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/sdnc-ueb-listener-image:1.4.3 +image: onap/sdnc-ueb-listener-image:1.4.4 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/sdnc/values.yaml b/kubernetes/sdnc/values.yaml index a82f053652..db47f20172 100644 --- a/kubernetes/sdnc/values.yaml +++ b/kubernetes/sdnc/values.yaml @@ -32,7 +32,7 @@ global: # application images repository: nexus3.onap.org:10001 pullPolicy: Always -image: onap/sdnc-image:1.4.3 +image: onap/sdnc-image:1.4.4 # flag to enable debugging - application support required debugEnabled: false |